AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

148-7178 PUMP GP-FUEL INJECTION S/N 7BJ1-9038; 5HK81000-99999 PART OF 122-8804 ENGINE AR-PRIMARY AN ATTACHMENT 428C


FUEL SYSTEM
PUMP GP-FUEL INJECTION
SEPARATOR GP-WATER
TANK GP-FUEL
BASIC ENGINE
PULLEY GP

BACKHOE LOADER 428C BACKHOE LOADER 8RN
 428C Backhoe Loader Center Pivot, Single Tilt 8RN04089-04989 (MACHINE) POWERED BY 3054 Engine SEBP2882 428C 8RN   (1995)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
130-1414 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
130-1416 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
130-6772 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
130-6774 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
148-7178 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
148-7179 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
148-7179 PUMP GP-FUEL INJECTION
 

#SEBP28820190
 

148-7178: PUMP GP-FUEL INJECTION

148-7178 PUMP GP-FUEL INJECTION
S/N 7BJ1-9038; 5HK81000-99999
PART OF 122-8804 ENGINE AR-PRIMARY
AN ATTACHMENT
i01038440 SEBP2882
1487178 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6627 D LOCKWIRE (.1M)  
2. 6I-0291 M [3] NUT (M8X1.25-THD)  
3. 067-7006 [1] SEAL  
4. 101-3877 [3] STUD (M8X1.25X37-MM)  
6. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
7. 140-8713 [2] CLIP  
8. 140-8714 [1] CLIP  
9. 140-8718 [4] WASHER  
10. 140-8719 [1] LINE-LEAKOFF  
11. 235-1790 [1] SWITCH-TEMPERATURE  
12. 154-6016 [1] GEAR-PUMP (56-TEETH)  
13. 156-1719 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
13A. 148-7110 [1] HOLDER  
13B. 148-7111 [1] NOZZLE  
14. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
15. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
16. 162-7500 [1] PUMP GP-FUEL INJECTION  
16A. 174-8831 [1] SOLENOID (TIMING ADVANCE)  
16B. 137-6395 [1] COIL AS  
16C. 137-6396 [1] LOCKNUT  
16D. 161-2161 [1] SEAL-O-RING  
16E. 192-9155 [1] CONTROL AS-FUEL RATIO  
17. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
18. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
19. 241-4754 [8] WASHER (6.35X9.75X1.55-MM THK)  
20. 247-9844 [3] BOLT (M6X1X16-MM)  
21. 247-9855 [1] BOLT (M6X1X30-MM)  
   
  107-2348 F [1] CLIP  
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP28820191
 

148-7179: PUMP GP-FUEL INJECTION

148-7179 PUMP GP-FUEL INJECTION
S/N 7BJ1-41218; 5HK81000-99999
PART OF 122-8803 ENGINE AR-PRIMARY
AN ATTACHMENT
i01043979 SEBP2882
1487179 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-7499 [1] PUMP GP-FUEL INJECTION  
1A. 137-6395 [1] COIL AS  
1B. 137-6396 [1] LOCKNUT  
1C. 174-8831 [1] SOLENOID (TIMING ADVANCE)  
2. 5P-6627 D LOCKWIRE (.1M)  
3. 6I-0291 M [3] NUT (M8X1.25-THD)  
4. 033-7625 [1] ELBOW  
5. 365-3308 [1] NUT-COMPRESSION  
6. 067-6265 [1] FITTING-BRASS  
7. 067-7006 [1] SEAL  
8. 101-3877 [3] STUD (M8X1.25X37-MM)  
9. 107-2348 [2] CLIP  
10. 107-2349 [1] HOSE  
11. 124-3713 [1] CONNECTION  
12. 124-3714 [3] BOLT  
13. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
14. 140-8718 [4] WASHER  
15. 140-8719 [1] LINE-LEAKOFF  
16. 140-8720 [8] WASHER  
17. 149-4910 [1] SWITCH (TIMING ADVANCE)  
18. 162-0807 [1] LEAD  
19. 154-6016 [1] GEAR-PUMP (56-TEETH)  
20. 173-6634 [1] TUBE AS  
21. 148-7108 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
21A. 148-7110 [1] HOLDER  
21B. 148-7111 [1] NOZZLE  
22. 140-8713 [2] CLIP  
23. 140-8714 [1] CLIP  
24. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
25. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
26. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
27. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
   
  121-4592 F [2] CLIP  
  121-4593 F [1] CLIP  
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP28820192
 

148-7179: PUMP GP-FUEL INJECTION

148-7179 PUMP GP-FUEL INJECTION
S/N 7BJ41219-UP
PART OF 122-8803 ENGINE AR-PRIMARY
AN ATTACHMENT
i01360254 SEBP2882
1487179 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-7499 [1] PUMP GP-FUEL INJECTION  
1A. 137-6396 [1] LOCKNUT  
2. 5P-6627 D LOCKWIRE (.1M)  
3. 6I-0291 M [3] NUT (M8X1.25-THD)  
4. 033-7625 [1] ELBOW  
5. 365-3308 [1] NUT-COMPRESSION  
6. 067-6265 [1] FITTING-BRASS  
7. 067-7006 [1] SEAL  
8. 101-3877 [3] STUD (M8X1.25X37-MM)  
9. 107-2348 [2] CLIP  
10. 107-2349 [1] HOSE  
11. 247-9855 [1] BOLT (M6X1X30-MM)  
12. 247-9844 [3] BOLT (M6X1X16-MM)  
13. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
14. 140-8718 [4] WASHER  
15. 140-8719 [1] LINE-LEAKOFF  
16. 241-4754 [8] WASHER (6.35X9.75X1.55-MM THK)  
17. 235-1790 [1] SWITCH-TEMPERATURE (TIMING ADVANCE)  
18. 162-0807 [1] LEAD  
19. 154-6016 [1] GEAR-PUMP (56-TEETH)  
20. 173-6634 [1] TUBE AS  
21. 156-1719 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
21A. 148-7110 [1] HOLDER  
21B. 148-7111 [1] NOZZLE  
22. 140-8713 [2] CLIP  
23. 140-8714 [1] CLIP  
24. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
25. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
26. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
27. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
   
  121-4592 F [2] CLIP  
  121-4593 F [1] CLIP  
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP28820193
 

7E-4636: SEPARATOR GP-WATER

7E-4636 SEPARATOR GP-WATER
S/N 8RN4089-4989
PART OF 143-1311, 154-5384 INSTALLATION AR-ENGINE
ALSO AN ATTACHMENT
i00405056 SEBP2882
7E4636 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7092 Y [1] FILTER GP-WATER SEP & FUEL  
2. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
3. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
4. 130-7964 [1] TUBE AS  
5. 127-8167 [2] CLIP  
6. 9R-2603 [1] TUBE AS  
7. 4H-2494 [3] SLEEVE-FITTING  
8. 033-7849 [2] PLUG  
9. 032-8100 [2] WASHER (0.531X0.718X0.064-IN THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28820194
 

106-1379: TANK GP-FUEL

106-1379 TANK GP-FUEL
S/N 8RN4089-4989
PART OF 143-1766 CHASSIS AR
Type 1
i00679095 SEBP2882
1061379 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6442 E HOSE (98CM)  
1A. 5P-6442 E HOSE (59CM)  
2. 159-1878 [1] TANK AS  
  7X-2644 F [1] CAP  
2A. 106-8020 [1] GASKET  
2B. 123-4950 M [8] SCREW-PAN HEAD (M6X1X16-MM)  
2C. 118-6848 [1] PLATE  
3. 1P-4278 [4] CLAMP-HOSE  
4. 9R-7240 [1] GASKET  
5. 116-4808 [1] TUBE  
6. 118-6846 [1] TREAD  
7. 118-6847 [1] STEP AS  
8. 123-4950 M [2] SCREW-PAN HEAD (M6X1X16-MM)  
9. 128-2875 [1] SENDER AS-FUEL LEVEL  
10. 149-7678 [1] TUBE AS  
11. 149-7679 [1] TUBE AS  
12. 149-7681 [1] PLATE AS  
13. 148-8316 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8947 [1] REDUCER  
14. 148-8407 [1] PLUG AS  
14A. 3J-1907 [1] SEAL-O-RING  
14B. 9S-4191 [1] PLUG (9/16-18-THD)  
15. 2B-2404 [2] CLIP  
16. 5P-4116 [7] WASHER-HARD (8.8X20.5X2-MM THK)  
17. 6K-5967 [1] CLIP  
18. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
20. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
21. 8T-4189 M [7] BOLT (M8X1.25X20-MM)  
22. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
23. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
24. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP28820195
 

106-1379: TANK GP-FUEL

106-1379 TANK GP-FUEL
S/N 8RN4089-4989
PART OF 143-1766 CHASSIS AR
Type 2
i01152876 SEBP2882
1061379 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6442 E HOSE (59-CM)  
2. 1P-4278 [4] CLAMP-HOSE  
3. 9R-7240 [1] GASKET  
4. 116-4808 [1] TUBE  
5. 118-6846 [1] TREAD  
6. 128-2875 [1] SENDER AS-FUEL LEVEL  
  9X-8491 [2] NUT (10-32-THD)  
  9X-8862 [2] LOCKWASHER  
7. 149-7678 [1] TUBE AS  
8. 149-7679 [1] TUBE AS  
9. 149-7681 [1] PLATE AS  
10. 164-3876 C [1] STEP AS  
11. 195-5642 Y [1] TANK GP-FUEL  
12. 123-4950 M [2] SCREW-PAN HEAD (M6X1X16-MM)  
13. 2B-2404 [2] CLIP  
14. 5P-4116 [7] WASHER-HARD (8.8X20.5X2-MM THK)  
15. 6K-5967 [1] CLIP  
16. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
18. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
19. 8T-4189 M [7] BOLT (M8X1.25X20-MM)  
20. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
21. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
22. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
24. 5P-6442 E HOSE (98-CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28820196
 

195-5642: TANK GP-FUEL

195-5642 TANK GP-FUEL
S/N 8RN4089-4989
PART OF 106-1379 TANK GP-FUEL
i01459591 SEBP2882
1955642 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 159-1878 [1] TANK AS  
1A. 123-4950 M [8] SCREW-PAN HEAD (M6X1X16-MM)  
1B. 7X-2644 [1] CAP  
1C. 106-8020 [1] GASKET  
1D. 118-6848 [1] PLATE  
2. 148-8316 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8647 [1] CONNECTOR  
3. 148-8407 [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
  M   METRIC PART
 

#SEBP28820197
 

105-2812: ALTERNATOR GP-CHARGING

105-2812 ALTERNATOR GP-CHARGING
S/N 8RN4089-4989
12 VOLT, 55 AMP
PART OF 121-5830, 137-3507 ALTERNATOR GP-CHARGING
AN ATTACHMENT
i00479586 SEBP2882
1052812 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [1] NUT (M6X1-THD)  
2. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 1H-3244 [1] LOCKWASHER  
4. 114-2863 [1] PULLEY-ALTERNATOR  
5. 114-2865 [1] FRAME AS-ALTERNATOR  
6. 114-2866 [1] ROTOR AS-ALTERNATOR  
7. 114-2867 [1] FRAME-ALTERNATOR  
8. 114-2868 [1] REGULATOR AS-ALTERNATOR  
9. 114-2869 [1] RECTIFIER AS-ALTERNATOR  
10. 114-2870 [1] HOLDER AS  
11. 114-2871 [1] COVER-ALTERNATOR  
12. 114-2872 [1] BUSHING-ALTERNATOR  
   
    AVAILABLE REPAIR KIT(S):
  114-2873 [1] KIT-ALTERNATOR BEARING  
    (INCLUDES COVERS, BEARINGS, WASHER,PLATE & SCREW)
  114-2874 [1] KIT-ALTERNATOR HARDWARE  
    (INCLUDES NUTS & BOLTS)
  114-2875 [1] KIT-ALTERNATOR HARDWARE  
    (INCLUDES SCREWS)
  M   METRIC PART
 

#SEBP28820198
 

105-2813: ALTERNATOR GP-CHARGING

105-2813 ALTERNATOR GP-CHARGING
S/N 8RN4089-4989
12-VOLT. 90-AMP
PART OF 121-5831, 121-5832 ALTERNATOR GP-CHARGING
AN ATTACHMENT
i00798710 SEBP2882
1052813 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-4457 [1] PULLEY-ALTERNATOR  
2. 113-4459 [1] FRAME AS-ALTERNATOR  
3. 113-4460 [1] ROTOR AS-ALTERNATOR  
4. 113-4461 [1] FRAME AS-ALTERNATOR  
5. 113-4462 [1] REGULATOR AS-ALTERNATOR  
6. 113-4463 [1] RECTIFIER AS-ALTERNATOR  
7. 113-4464 [1] COVER-ALTERNATOR  
8. 113-4469 [4] BUSHING-ALTERNATOR  
9. 113-4470 [1] BUSHING-ALTERNATOR  
10. 5C-2890 M [1] NUT (M6X1-THD)  
11. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 1H-3244 [1] LOCKWASHER  
   
    AVAILABLE REPAIR KIT(S):
  113-4465 [1] KIT-ALTERNATOR BEARING  
    (INCLUDES COVERS, BEARINGS, WASHER, PLATE & SCREW)
  113-4466 [1] KIT-REPAIR (ALTERNATOR BRUSHES)  
    (INCLUDES SEALS & HOLDER AS)
  113-4467 [1] KIT-ALTERNATOR TERMINAL  
    (INCLUDES NUTS, PLATE & SCREW)
  113-4468 [1] KIT-ALTERNATOR HARDWARE  
    (INCLUDES SCREWS)
  M   METRIC PART
 

#SEBP28820199
 

121-5830: ALTERNATOR GP-CHARGING

121-5830 ALTERNATOR GP-CHARGING
S/N 8RN4089-4989
FOR USE WITH NON AIR CONDITIONED MACHINES WITHOUT EXTRA WORK LIGHTS
AN ATTACHMENT
i00484152 SEBP2882
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  105-2812 Y [1] ALTERNATOR GP-CHARGING  
  7W-3896 [1] V-BELT SET (INCLUDES 2-BELTS)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Specifications
Fuel Injection Pump
3054 Engine
Fuel Injection Nozzles
3054 Engine
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Testing and Adjusting
Fuel Injection Nozzle - Test
3054 Engine
Disassembly and Assembly
Fuel Injection Nozzles - Remove - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Remove
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Install - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Install
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Remove - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Install - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Remove - Type 2 Engines and 7BJ Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Install - Type 2 Engines and 7BJ Engines
3054 Engine for Caterpillar Built Machines
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 428C :

PUMP GP-FUEL INJECTION
130-6774 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
130-6772 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
130-1416 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
130-1414 PUMP GP-FUEL INJECTION
166-0501 KIT-INJECTOR
FITTING GP-FUEL LINES
130-4646 FITTING GP-FUEL LINES
FILTER GP-WATER SEP & FUEL
130-7092 FILTER GP-WATER SEP & FUEL
FILTER GP-FUEL
138-3096 FILTER GP-FUEL
PUMP GP-FUEL INJECTION
148-7179 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
148-7179 PUMP GP-FUEL INJECTION
SEPARATOR GP-WATER
7E-4636 SEPARATOR GP-WATER
TANK GP-FUEL
106-1379 TANK GP-FUEL
TANK GP-FUEL
106-1379 TANK GP-FUEL
TANK GP-FUEL
195-5642 TANK GP-FUEL
ALTERNATOR GP-CHARGING
105-2812 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
105-2813 ALTERNATOR GP-CHARGING

Truck sale:

Caterpillar 428C, Construction
53,468 
Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar 428C, Construction
53,468 
Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
 
$25,882 USD 
CATERPILLAR 428C 2000
- BACKHOE LOADERS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
CATERPILLAR 428C 2000
 
CATERPILLAR 428C 2000
- BACKHOE LOADERS
CAVILL POWER PRODUCTS PTY. LTD.
315 Main North Road ENFIELD - ADELAIDE -
CATERPILLAR 428C 1998
 
CATERPILLAR 428C 1998
- BACKHOE LOADERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.