AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

104-9499 WIRING GP-AIR CONDITIONER S/N 8RN4089-4989 PART OF 144-2221, 145-7168 AIR CONDITIONER AR Type 1 AN ATTACHMENT 428C


ELECTRICAL AND STARTING SYSTEM
WIRING GP

BACKHOE LOADER 428C BACKHOE LOADER 8RN
 428C Backhoe Loader Center Pivot, Single Tilt 8RN04089-04989 (MACHINE) POWERED BY 3054 Engine SEBP2882 428C 8RN   (1995)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
154-5459 DRIVE AR-BACKHOE LOADER
KIT-BRAKE INDICATOR CONVERSION
173-0500 KIT-BRAKE INDICATOR CONVERSION
WIRING GP-AIR CONDITIONER
104-9499 WIRING GP-AIR CONDITIONER
WIRING GP-AIR CONDITIONER
104-9499 WIRING GP-AIR CONDITIONER
WIRING GP-CAB
105-5155 WIRING GP-CAB
140-2793 WIRING GP-CAB
 

#SEBP28820250
 

104-9499: WIRING GP-AIR CONDITIONER

104-9499 WIRING GP-AIR CONDITIONER
S/N 8RN4089-4989
PART OF 144-2221, 145-7168 AIR CONDITIONER AR
Type 1
AN ATTACHMENT
i00477482 SEBP2882
1049499 WIRING GP-AIR CONDITIONER Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-9511 [1] HARNESS AS-HEATER & AIR COND  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERAFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
2. 142-3026 [1] HARNESS AS-HEATER & AIR COND (AIR CONDITIONER COMPRESSOR)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERAFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8730 [6] SOCKET-CONNECTOR (16-GA TO 18-GA)  
3. 114-5333 [1] SWITCH AS-PRESSURE (HIGH-LOW)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 9X-7378 [1] SEAL-O-RING  
5. 9U-2277 [1] CLIP AS  
6. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
7. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4133 M [3] NUT (M10X1.5-THD)  
9. 113-8493 [1] FUSE (25-AMPERE)  
10. 113-8492 [1] FUSE (20-AMPERE)  
11. 113-8490 [1] FUSE (10-AMPERE)  
12. 3S-2093 [11] STRAP-CABLE  
13. 106-8704 [1] SUPPRESSOR AS-ARC  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
14. 4P-7581 [1] CLIP (LADDER)  
15. 3E-9362 [1] RELAY AS (12-VOLT)(HEATER, A/C POWER)  
16. 6K-0806 [3] STRAP-CABLE  
  M   METRIC PART
 

#SEBP28820251
 

104-9499: WIRING GP-AIR CONDITIONER

104-9499 WIRING GP-AIR CONDITIONER
S/N 8RN4089-4989
PART OF 144-2221, 145-7168 AIR CONDITIONER AR
Type 2
AN ATTACHMENT
i01243592 SEBP2882
1049499 WIRING GP-AIR CONDITIONER Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-6296 C [1] HARNESS AS-HEATER & AIR COND  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8730 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
2. 142-3026 [1] HARNESS AS-HEATER & AIR COND (AIR CONDITIONER COMPRESSOR)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8730 [6] SOCKET-CONNECTOR (16-GA TO 18-GA)  
3. 114-5333 [1] SWITCH AS-PRESSURE (HIGH-LOW)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 9X-7378 [1] SEAL-O-RING  
5. 9U-2277 [1] CLIP AS  
6. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
7. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4133 M [3] NUT (M10X1.5-THD)  
9. 113-8493 [1] FUSE (25-AMPERE)  
10. 113-8492 [1] FUSE (20-AMPERE)  
11. 113-8490 [1] FUSE (10-AMPERE)  
12. 3S-2093 [15] STRAP-CABLE  
13. 106-8704 [1] SUPPRESSOR AS-ARC  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
14. 4P-7581 [1] CLIP (LADDER)  
15. 3E-9362 [2] RELAY AS (12-VOLT)(HEATER, A/C POWER)  
16. 6K-0806 [4] STRAP-CABLE  
17. 179-5771 C [1] HARNESS AS-HEATER & AIR COND  
  111-6795 [1] HOUSING-RELAY  
  111-6816 [1] LOCK  
  144-1636 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [6] STRAP-CABLE  
  5P-1475 [2] TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)  
  111-6792 [4] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP28820252
 

105-5155: WIRING GP-CAB

105-5155 WIRING GP-CAB
S/N 8RN4089-4989
PART OF 154-5475 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
i00481281 SEBP2882
1055155 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-5156 [1] HARNESS AS-CAB (HEADLINER)  
  131-3798 [1] BASE  
  112-9611 [26] TERMINAL-BLADE (18-GA TO 20-GA)  
  116-4160 [11] TERMINAL-BLADE (12-GA TO 14-GA)  
  116-4161 [12] TERMINAL-BLADE (16-GA TO 18-GA)  
  124-9636 [1] BLOCK-MINIFUSE  
  124-9637 [1] LOCK-MINIFUSE  
  6K-0806 [8] STRAP-CABLE  
  8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [20] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  5P-5618 [1] TERMINAL-BLADE (10-GA TO 12-GA)  
  5P-4571 [4] TERMINAL-BLADE (14-GA TO 16-GA)  
  3E-9179 [5] TERMINAL-RECEPTACLE (14-GA TO 18-GA)  
  3S-2093 [9] STRAP-CABLE  
  8T-8737 [3] PLUG-SEAL  
  111-7898 [7] CONNECTOR (8-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  155-2274 [3] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 3S-2093 [3] STRAP-CABLE  
3. 105-5157 [1] PLATE  
4. 9X-1046 M [3] SCREW (M4X0.7X18-MM)  
5. 109-2352 [1] SWITCH AS (WASHER)  
  111-7899 [1] GASKET  
6. 118-0366 [1] SWITCH AS-ROCKER (REAR WIPER)  
  111-7899 [1] GASKET  
7. 109-2344 [1] SWITCH AS-ROCKER (FRONT WIPER)  
  111-7899 [1] GASKET  
8. 109-2346 [1] SWITCH AS-ROCKER (ROADING LIGHTS)  
  111-7899 [1] GASKET  
9. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE))
10. 113-8490 [3] FUSE (10-AMPERE)  
11. 104-3905 [1] COVER-FUSE  
12. 8T-4133 M [1] NUT (M10X1.5-THD)  
13. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
14. 6K-0806 [1] STRAP-CABLE  
  M   METRIC PART
 

#SEBP28820253
 

140-2793: WIRING GP-CAB

140-2793 WIRING GP-CAB
S/N 8RN4089-4989
PART OF 163-9195 CONVERSION AR-NON-ROPS
AN ATTACHMENT
i00500010 SEBP2882
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  140-2794 [1] HARNESS AS (SIDESHIFT, LOCK-UNLOCK)  
  111-7898 [1] CONNECTOR (8-PIN)  
  8T-8730 [1] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [1] STRAP-CABLE  
  5P-1476 [2] TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)  
  112-9611 [3] TERMINAL-BLADE (18-GA TO 20-GA)  
  109-2345 [1] SWITCH AS (AIR SEAT)  
  111-7899 GASKET  
 

#SEBP28820254
 

131-3404: WIRING GP-CANOPY

131-3404 WIRING GP-CANOPY
S/N 8RN4089-4989
PART OF 163-9193 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i00508570 SEBP2882
1313404 WIRING GP-CANOPY Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
2. 131-9293 [1] HARNESS AS-LIGHTING  
  116-4160 [5] TERMINAL-BLADE (12-GA TO 14-GA)  
  116-4161 [7] TERMINAL-BLADE (16-GA TO 18-GA)  
  124-9636 [1] BLOCK-MINIFUSE  
  124-9637 [1] LOCK-MINIFUSE  
  131-3798 [1] BASE  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9W-0844 [1] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  3E-9179 [5] TERMINAL-RECEPTACLE (14-GA TO 18-GA)  
  3S-2093 [6] STRAP-CABLE  
  8T-8737 [3] PLUG-SEAL  
  111-7898 [4] CONNECTOR (8-PIN)  
  112-9611 [11] TERMINAL-BLADE (18-GA TO 20-GA)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS , WEDGE & INTERFACE SEAL)
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 130-1280 [1] COVER  
4. 105-5154 [1] BRACKET AS  
5. 9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
6. 113-8490 [4] FUSE (10-AMPERE)  
7. 104-3905 [1] COVER-FUSE  
8. 109-2356 [1] PLUG  
9. 3S-2093 [1] STRAP-CABLE  
10. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
11. 8T-4133 M [3] NUT (M10X1.5-THD)  
13. 104-5964 [2] FILM  
14. 109-2346 [1] SWITCH AS-ROCKER (ROADING LIGHTS)  
  111-7899 [1] GASKET  
15. 6K-0806 [1] STRAP-CABLE  
  M   METRIC PART
 

#SEBP28820255
 

145-5936: WIRING GP-ENGINE

145-5936 WIRING GP-ENGINE
S/N 8RN4089-4670
PART OF 158-6064 ENGINE AR
AN ATTACHMENT
i00693243 SEBP2882
1455936 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
2. 9R-9903 [1] HARNESS AS-ENGINE  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [9] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [6] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  5P-6009 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  107-3134 [1] HOUSING-CONNECTOR  
  107-3136 [3] PLUG-SEAL  
  3C-2315 [1] TERMINAL  
  107-3135 [3] TERMINAL (16-GA TO 20-GA)  
  5P-1478 [1] TERMINAL-FORK (10-GA TO 12-GA, NO. 10 SCREW)  
  5P-1475 [2] TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)  
  5P-1476 [4] TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)  
  2L-8052 [1] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
    -OR-
  2L-8060 [1] TERMINAL-RING (8-GA, 3/8-IN SCREW)  
  2L-8079 [2] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  2L-8050 [1] TERMINAL-RING (6-GA, 1/4-IN SCREW)  
    -OR-
  2L-8058 [1] TERMINAL-RING (8-GA, 1/4-IN SCREW)  
3. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
4. 131-0232 [1] COVER  
5. 3S-2093 B [12] STRAP-CABLE  
6. 123-4950 M [3] SCREW-PAN HEAD (M6X1X16-MM)  
7. 4P-8134 [4] CLIP (LADDER)  
8. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
9. 8T-8799 [1] BOOT (RED)  
10. 4P-7581 [2] CLIP (LADDER)  
11. 7K-1181 [4] STRAP-CABLE  
12. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
13. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP28820256
 

145-5937: WIRING GP-ENGINE

145-5937 WIRING GP-ENGINE
S/N 8RN4089-4515
PART OF 158-6063, 158-6065 ENGINE AR
AN ATTACHMENT
i01028389 SEBP2882
1455937 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-4909 [1] HARNESS AS  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(8-CM)  
  8L-8413 [17] STRAP-CABLE (WHITE)  
  107-3134 [1] HOUSING-CONNECTOR  
  107-3135 [3] TERMINAL (16-GA TO 20-GA)  
  107-3135 [3] TERMINAL (16-GA TO 20-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  2L-8079 [2] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  1P-0810 E TAPE-ELECTRICAL (25-CM)  
  9X-3401 [9] PIN-CONNECTOR (16-GA TO 18-GA)  
  3C-2315 [1] TERMINAL  
  6K-0659 [3] TERMINAL-BLADE  
  128-4190 [1] TERMINAL AS  
  180-9340 [9] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  5P-1476 [4] TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)  
  128-4170 [1] TERMINAL AS  
  2L-8069 [2] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  2L-8079 [2] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  5P-4571 [2] TERMINAL-BLADE (14-GA TO 16-GA)  
  5P-6009 L TUBE-HEAT SHRINK (9.52-MM DIA)(1-DM)  
  5P-9799 D TUBE (HEAT SHRINK)(0.1-M)  
  9W-0852 [11] PIN-CONNECTOR (14-GA TO 16-GA)  
  5P-1478 TERMINAL-FORK (10-GA TO 12-GA, NO. 10 SCREW)  
  5P-1475 [2] TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  6K-0659 [3] TERMINAL-BLADE  
  128-4190 [1] TERMINAL AS  
  180-9340 [8] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
3. 131-0232 [1] COVER  
4. 3S-2093 B [12] STRAP-CABLE  
5. 123-4950 M [3] SCREW-PAN HEAD (M6X1X16-MM)  
6. 4P-8134 [3] CLIP (LADDER)  
7. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
8. 8T-8799 [1] BOOT (RED)  
9. 4P-7581 [3] CLIP (LADDER)  
10. 7K-1181 [4] STRAP-CABLE  
11. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
12. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
13. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  L   ORDER BY THE DECIMETER
  M   METRIC PART
 

#SEBP28820257
 

145-5937: WIRING GP-ENGINE

145-5937 WIRING GP-ENGINE
S/N 8RN4516-4989
PART OF 158-6063, 158-6065 ENGINE AR
AN ATTACHMENT
i01194459 SEBP2882
1455937 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-3771 C [1] HARNESS AS-ENGINE  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  5P-6009 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)  
  8L-8413 [19] STRAP-CABLE (WHITE)  
  107-3134 [1] HOUSING-CONNECTOR  
  107-3136 [3] PLUG-SEAL  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(8-CM)  
  3C-2315 [1] TERMINAL  
  107-3135 [3] TERMINAL (16-GA TO 20-GA)  
  5P-1478 [1] TERMINAL-FORK (10-GA TO 12-GA, NO. 10 SCREW)  
  5P-1476 [3] TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)  
  2L-8052 [1] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
    -OR-
  2L-8060 [1] TERMINAL-RING (8-GA, 3/8-IN SCREW)  
  2L-8069 [1] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  2L-8079 [2] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  2L-8050 [1] TERMINAL-RING (6-GA, 1/4-IN SCREW)  
    -OR-
  2L-8058 [1] TERMINAL-RING (8-GA, 1/4-IN SCREW)  
  5P-4571 [2] TERMINAL-BLADE (14-GA TO 16-GA)  
  9X-3401 [9] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [9] PIN-CONNECTOR (14-GA TO 16-GA)  
2. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
3. 131-0232 [1] COVER  
4. 3S-2093 B [12] STRAP-CABLE  
5. 123-4950 M [3] SCREW-PAN HEAD (M6X1X16-MM)  
6. 4P-8134 [2] CLIP (LADDER)  
7. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
8. 8T-8799 [1] BOOT (RED)  
9. 4P-7581 [4] CLIP (LADDER)  
10. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
11. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
12. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
13. 7K-1181 [4] STRAP-CABLE  
14. 6T-2665 [1] SWITCH AS-TEMPERATURE (COOLANT)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
15. 175-3070 [1] SENDER AS-TEMPERATURE (12-VOLT)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 4W-9972 [1] SENDER AS-TEMPERATURE (12-VOLT)  
  6V-8378 [1] NUT (10-32-THD)  
  8F-1434 [1] LOCKWASHER  
  8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
17. 3J-1907 [1] SEAL-O-RING  
18. 183-2530 [1] WIRE AS  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP28820258
 

145-5938: WIRING GP-ENGINE

145-5938 WIRING GP-ENGINE
S/N 8RN4089-4989
PART OF 147-6210, 158-6062 ENGINE AR
Type 1
AN ATTACHMENT
i00638389 SEBP2882
1455938 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9R-9903 [1] HARNESS AS-ENGINE  
  107-3135 [1] TERMINAL (16-GA TO 20-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(8-CM)  
  128-4170 TERMINAL AS  
  2L-8069 [1] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  2L-8079 [2] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  5P-4571 [2] TERMINAL-BLADE (14-GA TO 16-GA)  
  5P-6009 L TUBE-HEAT SHRINK (9.52-MM DIA)(1-DM)  
  5P-9799 D TUBE (HEAT SHRINK)(0.1-M)  
  107-3134 [1] HOUSING-CONNECTOR  
  107-3136 [3] PLUG-SEAL  
  8L-8413 [19] STRAP-CABLE (WHITE)  
  3C-2315 [1] TERMINAL  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  180-9340 [12] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  6K-0659 [3] TERMINAL-BLADE  
  128-4190 [1] TERMINAL AS  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [9] PIN-CONNECTOR (16-GA TO 18-GA)  
  1P-0810 E TAPE-ELECTRICAL (26-CM)  
  5P-1478 [1] TERMINAL-FORK (10-GA TO 12-GA, NO. 10 SCREW)  
  5P-1476 [3] TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)  
2. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
3. 131-0232 [1] COVER  
4. 3S-2093 B [14] STRAP-CABLE  
5. 123-4950 M [3] SCREW-PAN HEAD (M6X1X16-MM)  
6. 4P-8134 [4] CLIP (LADDER)  
7. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
8. 8T-8799 [1] BOOT (RED)  
9. 4P-7581 [4] CLIP (LADDER)  
10. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
12. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
13. 7K-1181 [4] STRAP-CABLE  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  L   ORDER BY THE DECIMETER
  M   METRIC PART
 

#SEBP28820259
 

145-5938: WIRING GP-ENGINE

145-5938 WIRING GP-ENGINE
S/N 8RN4089-4989
PART OF 158-6062 ENGINE AR
Type 2
AN ATTACHMENT
i01219608 SEBP2882
1455938 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-3771 C [1] HARNESS AS-ENGINE  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(8-CM)  
  8L-8413 [19] STRAP-CABLE (WHITE)  
  107-3134 [1] HOUSING-CONNECTOR  
  107-3135 [3] TERMINAL (16-GA TO 20-GA)  
  107-3135 [3] TERMINAL (16-GA TO 20-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  2L-8079 [2] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  5P-4571 [2] TERMINAL-BLADE (14-GA TO 16-GA)  
  1P-0810 E TAPE-ELECTRICAL (26-CM)  
  9X-3401 [9] PIN-CONNECTOR (16-GA TO 18-GA)  
  3C-2315 [1] TERMINAL  
  6K-0659 [3] TERMINAL-BLADE  
  128-4190 [1] TERMINAL AS  
  180-9340 [12] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  5P-6009 TUBE-HEAT SHRINK (9.52-MM DIA)  
  5P-9799 D TUBE (HEAT SHRINK)(0.1-M)  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  5P-1478 [1] TERMINAL-FORK (10-GA TO 12-GA, NO. 10 SCREW)  
  5P-1476 [3] TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)  
  128-4170 [1] TERMINAL AS  
  2L-8069 [1] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
2. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
3. 131-0232 [1] COVER  
4. 3S-2093 B [16] STRAP-CABLE  
5. 123-4950 M [3] SCREW-PAN HEAD (M6X1X16-MM)  
6. 4P-8134 [7] CLIP (LADDER)  
7. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
8. 8T-8799 [1] BOOT (RED)  
9. 4P-7581 [3] CLIP (LADDER)  
10. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
11. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
12. 7K-1181 [4] STRAP-CABLE  
13. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
14. 6T-2665 [1] SWITCH AS-TEMPERATURE (COOLANT)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
15. 175-3070 [1] SENDER AS-TEMPERATURE (12-VOLT)(COOLANT)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 4W-9972 [1] SENDER AS-TEMPERATURE (12-VOLT)(CONVERTER)  
  4B-2049 [1] NUT (10-32-THD)  
  8F-1434 [1] LOCKWASHER  
  8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
17. 3J-1907 [1] SEAL-O-RING  
18. 183-2530 [1] WIRE AS  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3054 Engine
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 428C :

WARNING GP-BACKUP
159-4915 WARNING GP-BACKUP
SWITCH GP-PRESSURE
130-4653 SWITCH GP-PRESSURE
STARTING MOTOR GP-ELECTRIC
143-0539 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
112-1767 STARTING MOTOR GP-ELECTRIC
STARTING AID GP
6I-0779 STARTING AID GP
STARTING AID GP
243-2999 STARTING AID GP
STARTING AID GP
221-7683 STARTING AID GP
STARTING AID GP
148-9687 STARTING AID GP
WIRING GP-AIR CONDITIONER
104-9499 WIRING GP-AIR CONDITIONER
WIRING GP-CAB
105-5155 WIRING GP-CAB
140-2793 WIRING GP-CAB
WIRING GP-CANOPY
131-3404 WIRING GP-CANOPY
WIRING GP-ENGINE
145-5936 WIRING GP-ENGINE
WIRING GP-ENGINE
145-5937 WIRING GP-ENGINE
WIRING GP-ENGINE
145-5937 WIRING GP-ENGINE
WIRING GP-ENGINE
145-5938 WIRING GP-ENGINE

Truck sale:

Caterpillar 428C, Construction
53,468 
Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar 428C, Construction
53,468 
Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
 
$25,882 USD 
CATERPILLAR 428C 2000
- BACKHOE LOADERS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
CATERPILLAR 428C 2000
 
CATERPILLAR 428C 2000
- BACKHOE LOADERS
CAVILL POWER PRODUCTS PTY. LTD.
315 Main North Road ENFIELD - ADELAIDE -
CATERPILLAR 428C 1998
 
CATERPILLAR 428C 1998
- BACKHOE LOADERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.