9W-8209 TIP-PENETRATION S/N 8RN4089-4989 SHARP CENTER FIELD INSTALLATION 428C BACKHOE LOADER

Part No	Qty	Parts name
104-9478 Y	[1]	AIR CONDITIONER GP
137-7140 Y	[1]	COMPRESSOR & MTG GP-REFRIG
144-2222 Y	[1]	CONDENSER & MTG GP-REFRIGERANT
145-7179 Y	[1]	LINES GP-AIR CONDITIONER
121-9752 Y	[1]	MOUNTING GP-RADIO
104-9499 Y	[1]	WIRING GP-AIR CONDITIONER
Y		SEPARATE ILLUSTRATION

#SEBP28820824

145-7168: AIR CONDITIONER AR

AIR CONDITIONER AR

145-7168 AIR CONDITIONER AR
S/N 8RN4089-4989
NON-EMISSIONS
AN ATTACHMENT

i00672253 SEBP2882

For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
104-9478 Y	[1]	AIR CONDITIONER GP
7E-4641 Y	[1]	COMPRESSOR & MTG GP-REFRIG
144-2222 Y	[1]	CONDENSER & MTG GP-REFRIGERANT
145-7179 Y	[1]	LINES GP-AIR CONDITIONER
121-9752 Y	[1]	MOUNTING GP-RADIO
104-9499 Y	[1]	WIRING GP-AIR CONDITIONER
Y		SEPARATE ILLUSTRATION

#SEBP28820825

104-9478: AIR CONDITIONER GP

AIR CONDITIONER GP

104-9478 AIR CONDITIONER GP
S/N 8RN4089-4989
PART OF 144-2221, 145-7168 AIR CONDITIONER AR
AN ATTACHMENT

i00720741 SEBP2882

For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2V-0099	[2]	KNOB-CONTROL
2.	3S-2093	[2]	STRAP-CABLE
3.	7K-3262	[2]	SCREW (THUMB)
4.	7T-9793	[2]	VALVE-CHECK
5.	8Y-6388	[6]	LOUVER AS-VENT
6.	9R-9901	[2]	FASTENER (CLIP)
7.	084-4277	[1]	LAMP GP-DOME (12-VOLT)
	6R-7490	[1]	LAMP (12-VOLT, 10-WATT)
8.	104-2091	[12]	SCREW-FLAT HEAD (6-20X0.5-IN)
9.	104-9481	[1]	FILTER ELEMENT-ENCLOSURE AIR
10.	104-9485	[1]	BRACKET AS
11.	104-9486	[1]	COVER-POST
12.	123-0253	[1]	BRACKET AS
13.	124-0256	[1]	PLATE
14.	131-5492	[2]	RETAINER-CAPTIVE
15.	131-8158	[2]	PLATE
16.	133-7655	[1]	FILM-CONTROL
17.	134-1224	[2]	GRILL
18.	134-2558	[1]	COVER
19.	142-9660 Y	[1]	AIR CONDITIONER GP
20.	144-9973	[6]	CLAMP
21.	146-6919	[1]	LINER-CAB
22.	149-1507	[1]	LINER AS-CAB
	131-9253	[1]	DUCT
	131-9254	[1]	DUCT
	133-4964	[8]	NUT-JACK
23.	151-1264	[2]	ELBOW
24.	158-5064	[1]	DUCT
25.	158-5065	[1]	DUCT
26.	5P-4115	[3]	WASHER-HARD (7.2X19X2-MM THK)
27.	7X-2537 M	[4]	BOLT (M8X1.25X35-MM)
28.	8T-4121	[9]	WASHER-HARD (11X21X2.5-MM THK)
29.	8T-4137 M	[9]	BOLT (M10X1.5X20-MM)
30.	8T-4138 M	[3]	BOLT (M6X1X20-MM)
31.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
32.	8Y-7446	[4]	SCREW-PAN HEAD
33.	5P-6129 D		TUBE (6-M)
34.	129-1854 E		FASTENER-LOOP
35.	129-1855 E		FASTENER-HOOK
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP28820826

142-9660: AIR CONDITIONER GP

AIR CONDITIONER GP

142-9660 AIR CONDITIONER GP
S/N 8RN4089-4989
PART OF 104-9478 AIR CONDITIONER GP, 148-9152 KIT-AIR CONDITIONER
AN ATTACHMENT

i00720861 SEBP2882

For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	133-8715	[1]	GROMMET
2.	2P-4339	[4]	NUT-JAM (7/16-28-THD)
3.	2S-3745	[4]	SCREW-TAPPING (10-16X0.5-IN)
4.	174-1490	[1]	MOTOR AS-ELECTRIC
	7T-0093	[2]	PIN-CONNECTOR (12-GA TO 14-GA)
	177-9645	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	177-9643	[1]	LOCK
	177-9644	[1]	SEAL-RECEPTACLE
5.	6P-3236	[1]	SWITCH AS-ROTARY
	6V-8362	[5]	SCREW-MACHINE (8-32X0.31-IN)
	9B-7233	[5]	LOCKWASHER
6.	7X-2049	[1]	TUBE AS
7.	8C-3756	[1]	FILM-IDENTIFICATION (AIR CONDITIONER)
8.	8C-4586	[2]	CLAMP
9.	8C-7581 M	[1]	SCREW-MACHINE (M4X0.7X8-MM)
10.	100-3426	[2]	WHEEL AS-BLOWER
11.	124-7141	[2]	WASHER-SPECIAL
12.	129-1274	[4]	FASTENER AS-AIR CONDITIONER
13.	133-9012	[1]	FUSE (15-AMPERE)
14.	134-2885	[1]	RESISTOR
15.	141-9784 M	[1]	BOLT (M6X1X190-MM)
16.	147-1481	[1]	COVER
17.	147-1482	[1]	PLATE AS
18.	147-1483	[1]	BLOWER AS
19.	147-1484	[1]	PLATE AS
20.	147-1486	[1]	COIL AS-EVAPORATOR
21.	147-1487	[1]	GASKET
22.	148-1319	[1]	GASKET
23.	148-1903	[1]	GASKET
24.	148-5557	[1]	INSULATION
25.	148-6737	[1]	SWITCH AS-TEMPERATURE
26.	148-6751	[1]	HARNESS AS-HEATER & AIR COND
	7K-4474	[1]	CONNECTOR AS
	6K-7361	[1]	CONNECTOR-BULLET
	6T-6505	[7]	HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8L-8413	[5]	STRAP-CABLE (WHITE)
	2L-8069	[1]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	8T-9850	[5]	TERMINAL-BLADE (10-GA TO 12-GA)
	6T-6506	[2]	TERMINAL-BLADE (14-GA TO 18-GA)
	5P-1477	[4]	TERMINAL-FORK (10-GA TO 12-GA, NO. 8 SCREW)
	5P-1475	[1]	TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)
27.	151-8373	[1]	GASKET
28.	151-8376	[1]	PLATE-ORIFICE
29.	151-8377	[1]	PLATE-ORIFICE
30.	154-5630	[1]	GASKET
31.	154-5631	[1]	GASKET
32.	129-3178 M	[19]	LOCKNUT (M6X1-THD)
33.	3S-2093	[2]	STRAP-CABLE
34.	6V-1668	[2]	WASHER (6.5X29.1X3-MM THK)
35.	6V-7728 M	[1]	BOLT (M6X1X45-MM)
36.	8M-2771	[1]	CLIP
37.	8T-4171 M	[4]	BOLT (M6X1X12-MM)
38.	8T-4205	[25]	WASHER-HARD (7.2X14.5X2-MM THK)
39.	152-6609 E		SEAL-BULK (86-CM)
40.	5P-6410 D		SEAL (0.5-M)
41.	4K-2089	[4]	RIVET-POP
42.	5P-5637	[2]	SEAL
43.	147-1485	[2]	GASKET-DUCT
44.	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP28820827

154-5475: CAB AR-ENCLOSED ROPS

CAB AR-ENCLOSED ROPS

154-5475 CAB AR-ENCLOSED ROPS
S/N 8RN4089-4989
AN ATTACHMENT

i01120670 SEBP2882

For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
104-3447 Y	[1]	CAB GP-ENCLOSED ROPS
		-OR-
154-5478 Y	[1]	CAB GP
104-6044 Y	[1]	CONSOLE GP-FRONT
3E-8211 E		FILM-STRIPE (400CM)
110-0037	[1]	FILM (CATERPILLAR, SUN VISOR)
104-6045 Y	[1]	FLOORPLATE GP
104-6038 Y	[1]	HEATER GP-CAB
104-6043 Y	[1]	LINES GP-HEATER
131-2747	[1]	MAT-PROTECTIVE
104-6031 Y	[1]	WASHER GP-WINDOW
Y	[1]	WIPER GP-WINDOW
105-5155 Y	[1]	WIRING GP-CAB
154-5414 Y	[1]	WIRING GP-ENGINE
104-5969 Y	[1]	WIRING GP-POWER RECEPTACLE
E		ORDER BY THE CENTIMETER
Y		SEPARATE ILLUSTRATION

#SEBP28820828

154-5478: CAB GP

CAB GP

154-5478 CAB GP
S/N 8RN4197-4989
PART OF 154-5475 CAB AR-ENCLOSED ROPS
AN ATTACHMENT

i00977788 SEBP2882

For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	104-3449 Y	[1]	CAB GP-ENCLOSED ROPS
2.	104-5961	[1]	HARNESS AS-PLATFORM (COSA)
3.	3S-2093	[25]	STRAP-CABLE
4.	8Y-7252 J	[1]	GLASS (WINDSHIELD)
5.	8Y-7253 J	[1]	GLASS-CAB
6.	8Y-7254 J	[1]	GLASS-CAB
7.	100-7053	[1]	FENDER
8.	100-7052	[1]	FENDER
9.	5P-5992 E		HOSE (410CM EACH)
10.	5P-4116	[31]	WASHER-HARD (8.8X20.5X2-MM THK)
11.	8T-4908 M	[18]	BOLT (M8X1.25X25-MM)
12.	7X-2537 M	[4]	BOLT (M8X1.25X35-MM)
13.	5C-7261 M	[5]	NUT (M8X1.25-THD)
14.	6V-1392 D		SEAL (.6M)
15.	8T-4222	[2]	WASHER-PLATED (11X32X2.5-MM THK)
16.	104-3918	[2]	PLATE
17.	106-1742	[6]	PLATE
18.	128-7772	[1]	PLATE (LH)
19.	128-7773	[1]	PLATE (RH)
20.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
21.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
22.	8Y-7256 Y	[1]	WINDOW GP-CAB (REAR)
23.	131-3987 M	[13]	SCREW (M4X0.7X12-MM)
24.	147-1982	[1]	CHANNEL
25.	147-1980	[1]	CHANNEL AS
26.	159-4945	[2]	KEEPER (LH)
27.	159-4946	[2]	KEEPER
28.	8Y-7274 J	[1]	GLASS (LH)
29.	8Y-7272 J	[1]	GLASS (RH)
30.	134-3061	[1]	PLATE
31.	134-3060	[1]	PLATE
32.	8T-4200 M	[4]	BOLT (M8X1.25X16-MM)
33.	154-5426 Y	[1]	WINDOW GP-CAB (RH)
34.	154-5425 Y	[1]	WINDOW GP-CAB (LH)
35.	Y	[1]	DOOR GP-CAB (LH)
36.	Y	[1]	DOOR GP-CAB (RH)
37.	129-5257	[8]	BUSHING
38.	129-5256	[12]	BUSHING
39.	8Y-7444	[2]	PIN
40.	8S-7803	[8]	RING-RETAINING
41.	117-7414	[2]	PIN
42.	131-3986 M	[2]	SCREW (M4X0.7X12-MM)
43.	108-4311	[2]	SCREW-MACHINE (3/8-16X0.75-IN)(3/8-16THD (HEX))
44.	134-3062	[2]	STRIKER
45.	134-3503	[1]	GUARD-STRIKER
46.	134-3059	[1]	GUARD
47.	4P-7581	[1]	CLIP (LADDER)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	J		USE ADHESIVE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP28820829

104-3447: CAB GP-ENCLOSED ROPS

CAB GP-ENCLOSED ROPS

104-3447 CAB GP-ENCLOSED ROPS
S/N 8RN4089-4196
PART OF 154-5475 CAB AR-ENCLOSED ROPS
AN ATTACHMENT

i00473053 SEBP2882

1043447 CAB GP-ENCLOSED ROPS Parts scheme

For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	104-3449 Y	[1]	CAB GP-ENCLOSED ROPS
2.	104-5961	[1]	HARNESS AS-PLATFORM (COSA)
3.	3S-2093	[25]	STRAP-CABLE
4.	8Y-7252	[1]	GLASS
5.	8Y-7254	[1]	GLASS-CAB
6.	8Y-7253	[1]	GLASS-CAB
7.	100-7053	[1]	FENDER
8.	100-7052	[1]	FENDER
9.	5P-5992 B		HOSE (8.2M)
10.	5P-4116	[31]	WASHER-HARD (8.8X20.5X2-MM THK)
11.	8T-4908 M	[18]	BOLT (M8X1.25X25-MM)
12.	7X-2537 M	[4]	BOLT (M8X1.25X35-MM)
13.	5C-7261 M	[5]	NUT (M8X1.25-THD)
14.	6V-1392 E		SEAL (60CM)
15.	8T-4222	[2]	WASHER-PLATED (11X32X2.5-MM THK)
16.	104-3918	[2]	PLATE
17.	106-1742	[6]	PLATE
18.	128-7772	[1]	PLATE (LH)
19.	128-7773	[1]	PLATE (RH)
20.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
21.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
22.	8Y-7256 Y	[1]	WINDOW GP-CAB (REAR)
23.	131-3987 M	[5]	SCREW (M4X0.7X12-MM)
24.	8Y-7270	[1]	CHANNEL
25.	8Y-7267	[1]	CHANNEL
26.	9X-2044 M	[8]	SCREW-TRUSS HEAD (M6X1X16-MM)
27.	104-9475	[4]	PLATE AS
28.	8Y-7274	[1]	GLASS
29.	8Y-7272	[1]	GLASS
30.	134-3061	[1]	PLATE
31.	134-3060	[1]	PLATE
32.	8T-4200 M	[4]	BOLT (M8X1.25X16-MM)
33.	130-3492 Y	[1]	DOOR GP-CAB (LH)
34.	104-7011 Y	[1]	DOOR GP-CAB (RH)
35.	129-8842 Y	[1]	WINDOW GP-CAB (LH)
36.	129-8841 Y	[1]	WINDOW GP-CAB (RH)
37.	129-5257	[8]	BUSHING
38.	129-5256	[12]	BUSHING
39.	8Y-7444	[2]	PIN
40.	8S-7803	[8]	RING-RETAINING
41.	117-7414	[2]	PIN
42.	131-3986 M	[2]	SCREW (M4X0.7X12-MM)
43.	108-4311	[2]	SCREW-MACHINE (3/8-16X0.75-IN)
44.	134-3062	[2]	STRIKER
45.	134-3503	[1]	GUARD-STRIKER
46.	134-3059	[1]	GUARD
47.	4P-7581	[1]	CLIP (LADDER)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)

Special Instruction

256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}

Tool Operating Manual

Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}

Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Caterpillar Parts SIS Catalog 428C :

9W-8208 TIP-PENETRATION

1U-3209 TIP-PENETRATION

4T-2203 TIP-ABRASION

101-4419 PLATE GP-SIDE

9R-5430 MOUNTING GP-FORK

108-1587 MOUNTING GP-FORK

223-1882 MOUNTING GP-BUCKET

137-3848 MOUNTING GP-BUCKET

9R-5866 TOOTH GP-UNI

9W-1880 TOOTH GP-UNI

144-2221 AIR CONDITIONER AR

145-7168 AIR CONDITIONER AR

104-9478 AIR CONDITIONER GP

142-9660 AIR CONDITIONER GP

154-5475 CAB AR-ENCLOSED ROPS

154-5478 CAB GP

Truck sale:

53,468

Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand

53,468

Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand

$25,882 USD

CATERPILLAR 428C 2000
- BACKHOE LOADERS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -

CATERPILLAR 428C 2000
- BACKHOE LOADERS
CAVILL POWER PRODUCTS PTY. LTD.
315 Main North Road ENFIELD - ADELAIDE -

CATERPILLAR 428C 1998
- BACKHOE LOADERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -