243-2999 STARTING AID GP -LINES S/N 7BJ74538-UP PART OF 122-8803 ENGINE AR-PRIMARY AN ATTACHMENT 428C

ELECTRICAL AND STARTING SYSTEM

STARTING AID GP

0. 243-2999 STARTING A
1. 6I-0779 STARTING A

STARTING MOTOR GP

2. 112-1767 STARTING M
3. 143-0539 STARTING M

SWITCH GP

4. 130-4653 SWITCH GP-

WARNING GP

5. 159-4915 WARNING GP

WIRING GP

6. 104-9499 WIRING GP-
7. 139-6173 WIRING GP-
8. 105-5155 WIRING GP-
9. 140-2793 WIRING GP-
0. INFORMATION

BACKHOE LOADER 428C BACKHOE LOADER 2CR
428C Backhoe Loader Side Shift, Parallel Lift 2CR16212-19309 (MACHINE) POWERED BY 3054 Engine SEBP2883 428C 2CR (1995)

ELECTRICAL AND STARTING SYSTEM

STARTING AID GP

130-4650 STARTING AID GP

130-4815 STARTING AID GP

148-9687 STARTING AID GP

221-7683 STARTING AID GP

243-2999 STARTING AID GP

6I-0779 STARTING AID GP

#SEBP28830240

243-2999: STARTING AID GP

STARTING AID GP

243-2999 STARTING AID GP -LINES
S/N 7BJ74538-UP
PART OF 122-8803 ENGINE AR-PRIMARY
AN ATTACHMENT

i02110920 SEBP2883

For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	219-2332	[1]	TUBE AS
1A.	101-3983	[1]	NUT (3/16)
1B.	101-3984	[1]	FERRULE
1C.	101-3986	[1]	CLIP
2.	067-6998	[1]	NUT (3/8-24-THD)
3.	067-6999	[1]	FERRULE

#SEBP28830241

6I-0779: STARTING AID GP

STARTING AID GP

6I-0779 STARTING AID GP
S/N 5HK81000-99999; 9RM1-UP
PART OF 106-5001 ENGINE AR-PRIMARY
AN ATTACHMENT

i00390926 SEBP2883

For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-0780	[1]	LINE AS
2.	7W-4539	[1]	CLIP
3.	105-3154	[1]	CLIP
4.	067-6999	[1]	FERRULE
5.	101-3986	[1]	CLIP
6.	067-6998	[1]	NUT (3/8-24-THD)

#SEBP28830242

112-1767: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

112-1767 STARTING MOTOR GP-ELECTRIC
S/N 2CR16212-19309
INCLUDES MOUNTING
PART OF 143-1311, 154-5384 INSTALLATION AR-ENGINE
ALSO AN ATTACHMENT

i00600849 SEBP2883

1121767 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	143-0539 CY	[1]	STARTING MOTOR GP-ELECTRIC (12-VOLT)
2.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
3.	8T-4133 M	[3]	NUT (M10X1.5-THD)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP28830243

143-0539: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

143-0539 STARTING MOTOR GP-ELECTRIC
S/N 2CR16212-19309
12-VOLT
PART OF 112-1767 STARTING MOTOR GP-ELECTRIC
ALSO AN ATTACHMENT

i00597681 SEBP2883

1430539 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8C-9778	[1]	PLUNGER AS
2.	8C-9783	[1]	GASKET
3.	2P-8104	[1]	BEARING
4.	7T-6092	[1]	HOLDER AS-BRUSH
5.	8T-4133 M	[2]	NUT (M10X1.5-THD)
6.	7T-6088	[1]	BEARING AS
7.	7T-6087	[1]	WASHER (15.2X40X0.5-MM THK)
8.	7T-6093	[1]	CLUTCH AS
9.	8J-4455	[1]	BALL
10.	7T-6090	[1]	SPRING
11.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
12.	3E-5153	[1]	COVER-STARTING MOTOR
13.	3E-5154	[1]	BUSHING-STARTING MOTOR
14.	8F-1434	[1]	LOCKWASHER
15.	100-4113	[1]	SWITCH AS (STARTING MOTOR, 12-VOLT)
16.	100-4119	[1]	ARMATURE AS
17.	100-4118	[1]	CASE AS-STARTING MOTOR
18.	100-4115	[1]	HOUSING-STARTING MOTOR
19.	143-1344	[1]	FRAME-STARTER
20.	100-3685	[1]	CAP

			AVAILABLE REPAIR KIT(S):
	7T-6099	[1]	KIT-GEAR (STARTING MOTOR)
			(INCLUDES RETAINER, PINION & ROLLERS)
	8C-5457	[1]	KIT-CONTACT (STARTING MOTOR)
			(INCLUDES NUT, WASHER, PLATE, BUSHINGS, & BOLT)
	146-6729	[1]	KIT-HARDWARE (STARTING MOTOR)
			(INCLUDES BOLTS, SCREWS, SCREW ASSEMBLIES & PLATE)
	100-4112	[1]	KIT-CONTACT (STARTING MOTOR)
			(INCLUDES NUT, WASHERS, SEAL, BUSHINGS, PLATE & BOLT)
	M		METRIC PART

#SEBP28830244

130-4653: SWITCH GP-PRESSURE

SWITCH GP-PRESSURE

130-4653 SWITCH GP-PRESSURE
S/N 7BJ1-UP; 5HK81000-99999; 9RM1-UP
PART OF 106-5001, 106-5002, 122-8803, 122-8804 ENGINE AR-PRIMARY
AN ATTACHMENT

i00796957 SEBP2883

For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	253-7910	[1]	SWITCH AS-PRESSURE (ENGINE OIL)
2.	035-8063	[1]	PLUG

#SEBP28830245

159-4915: WARNING GP-BACKUP

WARNING GP-BACKUP

159-4915 WARNING GP-BACKUP
S/N 2CR16212-19309
AN ATTACHMENT

i01012327 SEBP2883

For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	154-5428 J	[1]	ALARM AS
2.	9X-2045 M	[2]	SCREW-TRUSS HEAD (M6X1X20-MM)
3.	3S-2093	[1]	STRAP-CABLE

			AVAILABLE REPAIR KIT(S):
	102-8802 J	[1]	KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
	J		KIT MARKED J SERVICE(S) PARTS MARKED J
	M		METRIC PART

#SEBP28830246

104-9499: WIRING GP-AIR CONDITIONER

WIRING GP-AIR CONDITIONER

104-9499 WIRING GP-AIR CONDITIONER
S/N 2CR16212-19309
PART OF 144-2221, 145-7168 AIR CONDITIONER AR
AN ATTACHMENT

i00477482 SEBP2883

1049499 WIRING GP-AIR CONDITIONER Parts scheme

For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	104-9511	[1]	HARNESS AS-HEATER & AIR COND
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERAFACE SEAL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
2.	142-3026	[1]	HARNESS AS-HEATER & AIR COND (AIR CONDITIONER COMPRESSOR)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERAFACE SEAL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
3.	114-5333	[1]	SWITCH AS-PRESSURE (HIGH-LOW)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
4.	9X-7378	[1]	SEAL-O-RING
5.	9U-2277	[1]	CLIP AS
6.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
7.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
8.	8T-4133 M	[3]	NUT (M10X1.5-THD)
9.	113-8493	[1]	FUSE (25-AMPERE)
10.	113-8492	[1]	FUSE (20-AMPERE)
11.	113-8490	[1]	FUSE (10-AMPERE)
12.	3S-2093	[11]	STRAP-CABLE
13.	106-8704	[1]	SUPPRESSOR AS-ARC
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
14.	4P-7581	[1]	CLIP (LADDER)
15.	3E-9362	[1]	RELAY AS (12-VOLT)(HEATER, A/C POWER)
16.	6K-0806	[3]	STRAP-CABLE
	M		METRIC PART

#SEBP28830247

139-6173: WIRING GP-BROOM

WIRING GP-BROOM

139-6173 WIRING GP-BROOM
S/N 2CR16212-19309
AN ATTACHMENT

i01041496 SEBP2883

For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	165-9074	[1]	SWITCH AS (POWER ANGLE BROOM)
	111-7899	[1]	GASKET
2.	174-3048	[1]	HARNESS AS
3.	171-7159	[1]	BRACKET
4.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
5.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-0389 M	[2]	LOCKNUT (M10X1.5-THD)
7.	3S-2093	[2]	STRAP-CABLE
8.	132-5789	[2]	CLIP (LADDER)
9.	159-9495	[1]	NUT (1-1/2-18-THD)
10.	159-9496	[1]	LOCKWASHER
	M		METRIC PART

#SEBP28830248

105-5155: WIRING GP-CAB

WIRING GP-CAB

105-5155 WIRING GP-CAB
S/N 2CR16212-19309
PART OF 154-5475 CAB AR-ENCLOSED ROPS
AN ATTACHMENT

i00481281 SEBP2883

For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	105-5156	[1]	HARNESS AS-CAB (HEADLINER)
	131-3798	[1]	BASE
	112-9611	[26]	TERMINAL-BLADE (18-GA TO 20-GA)
	116-4160	[11]	TERMINAL-BLADE (12-GA TO 14-GA)
	116-4161	[12]	TERMINAL-BLADE (16-GA TO 18-GA)
	124-9636	[1]	BLOCK-MINIFUSE
	124-9637	[1]	LOCK-MINIFUSE
	6K-0806	[8]	STRAP-CABLE
	8T-8729	[5]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[20]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	5P-5618	[1]	TERMINAL-BLADE (10-GA TO 12-GA)
	5P-4571	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	3E-9179	[5]	TERMINAL-RECEPTACLE (14-GA TO 18-GA)
	3S-2093	[9]	STRAP-CABLE
	8T-8737	[3]	PLUG-SEAL
	111-7898	[7]	CONNECTOR (8-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	155-2274	[3]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
2.	3S-2093	[3]	STRAP-CABLE
3.	105-5157	[1]	PLATE
4.	9X-1046 M	[3]	SCREW (M4X0.7X18-MM)
5.	109-2352	[1]	SWITCH AS (WASHER)
	111-7899	[1]	GASKET
6.	118-0366	[1]	SWITCH AS-ROCKER (REAR WIPER)
	111-7899	[1]	GASKET
7.	109-2344	[1]	SWITCH AS-ROCKER (FRONT WIPER)
	111-7899	[1]	GASKET
8.	109-2346	[1]	SWITCH AS-ROCKER (ROADING LIGHTS)
	111-7899	[1]	GASKET
9.	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE))
10.	113-8490	[3]	FUSE (10-AMPERE)
11.	104-3905	[1]	COVER-FUSE
12.	8T-4133 M	[1]	NUT (M10X1.5-THD)
13.	3E-3383	[1]	WEDGE-RECEPTACLE LOCK (6-PIN)
14.	6K-0806	[1]	STRAP-CABLE
	M		METRIC PART

#SEBP28830249

140-2793: WIRING GP-CAB

WIRING GP-CAB

140-2793 WIRING GP-CAB
S/N 2CR16212-19309
PART OF 163-9195 CONVERSION AR-NON-ROPS
AN ATTACHMENT

i00500010 SEBP2883

For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
140-2794	[1]	HARNESS AS (SIDESHIFT, LOCK-UNLOCK)
111-7898	[1]	CONNECTOR (8-PIN)
8T-8730	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
3S-2093	[1]	STRAP-CABLE
5P-1476	[2]	TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)
112-9611	[3]	TERMINAL-BLADE (18-GA TO 20-GA)
109-2345	[1]	SWITCH AS (AIR SEAT)
111-7899		GASKET