AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

124-8819 VALVE GP-CONTROL -TILT S/N 2CR16212-19309 PART OF 159-7557 VALVE GP-BANK 2, 159-7558 VALVE GP-BANK 3 AN ATTACHMENT 428C


HYDRAULIC SYSTEM
VALVE GP-CONTROL
PUMP GP

BACKHOE LOADER 428C BACKHOE LOADER 2CR
 428C Backhoe Loader Side Shift, Parallel Lift 2CR16212-19309 (MACHINE) POWERED BY 3054 Engine SEBP2883 428C 2CR   (1995)

HYDRAULIC SYSTEM

VALVE GP-CONTROL
MOUNTING GP-BANK VALVE
122-9137 MOUNTING GP-BANK VALVE
VALVE GP-CONTROL
124-8816 VALVE GP-CONTROL
VALVE GP-CONTROL
124-8819 VALVE GP-CONTROL
VALVE GP-CONTROL
124-8820 VALVE GP-CONTROL
VALVE GP-CONTROL
130-6520 VALVE GP-CONTROL
VALVE GP-CONTROL
132-5134 VALVE GP-CONTROL
 

#SEBP28830530
 

124-8819: VALVE GP-CONTROL

124-8819 VALVE GP-CONTROL -TILT
S/N 2CR16212-19309
PART OF 159-7557 VALVE GP-BANK 2, 159-7558 VALVE GP-BANK 3
AN ATTACHMENT
i00519537 SEBP2883
1248819 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-4524 [1] GUARD-DUST  
2. 031-0214 [2] BOLT-LOCKING (1/4-20X0.5-IN)  
3. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 132-5303 [1] VALVE GP-RELIEF  
4A. 4K-1388 [1] SEAL-O-RING  
4B. 5K-9090 [1] SEAL-O-RING  
4C. 6E-0358 [1] RING-BACKUP  
5. 4T-4513 [1] SPRING  
6. 100-3567 [1] HOUSING-DETENT  
7. 133-8688 [1] SPRING  
8. 3E-8620 [1] COIL AS-SOLENOID  
  1S-9593 [2] STRAP-CABLE  
  3E-3364 [1] RECEPTACLE (2-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
9. 128-2776 [1] GASKET  
10. 9T-0644 [1] SPRING  
11. 133-8689 [1] HOUSING  
12. 5L-9023 [1] RING-RETAINING  
13. 9T-7309 [1] PLATE  
14. 133-8690 [1] COUPLING AS  
15. 8F-0212 [2] SEAL-O-RING  
16. 4T-4521 [3] RETAINER  
17. 100-3563 [1] SPACER  
18. 7F-8607 [2] SEAL-O-RING  
19. 6E-4317 [1] SPRING  
20. 2M-9780 [1] SEAL-O-RING  
21. 9S-8006 [1] PLUG (7/8-14-THD)  
22. 4T-4520 [1] WASHER-SPECIAL  
23. 4T-4528 [1] RETAINER  
24. 126-5476 [1] SEAT AS-SHUTTLE  
  4T-7807 [1] RING-BACKUP  
  7J-0204 [1] SEAL-O-RING  
  8T-2360 [1] SEAL-O-RING  
25. 1B-2718 [2] BOLT (1/4-20X6-IN)  
26. 5B-9318 [1] BALL  
27. 155-9836 [1] VALVE GP-CHECK  
28. 3J-7354 [1] SEAL-O-RING  
29. 126-5985 [1] RING-BACKUP  
30. 1P-7363 [1] SEAL-O-RING  
31. 126-5984 [1] RING-BACKUP  
32. 8T-2361 [1] SEAL-O-RING  
33. 6E-6284 [1] VALVE GP-RELIEF  
34. 5K-9090 [1] SEAL-O-RING  
35. 6E-0358 [1] RING-BACKUP  
36. 4K-1388 [1] SEAL-O-RING  
 

#SEBP28830531
 

124-8820: VALVE GP-CONTROL

124-8820 VALVE GP-CONTROL -CLAMSHELL
S/N 2CR16212-19309
PART OF 112-1849 CONVERSION GP-CONTROL VALVE, 159-7558 VALVE GP-BANK 3
AN ATTACHMENT
i00519539 SEBP2883
1248820 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-4524 [1] GUARD-DUST  
2. 031-0214 [2] BOLT-LOCKING (1/4-20X0.5-IN)  
3. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 4T-4521 [2] RETAINER  
5. 9T-7305 [1] GASKET  
6. 9T-0642 [1] COUPLING  
7. 5L-9023 [1] RING-RETAINING  
8. 4T-4532 [1] HOUSING  
9. 9T-0644 [1] SPRING  
10. 9T-7309 [1] PLATE  
11. 3E-8620 [1] COIL AS-SOLENOID  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
12. 4T-4516 [1] SPRING  
13. 8F-0212 [1] SEAL-O-RING  
14. 7F-8607 [2] SEAL-O-RING  
15. 6E-4317 [1] SPRING  
16. 2M-9780 [1] SEAL-O-RING  
17. 9S-8006 [1] PLUG (7/8-14-THD)  
18. 4T-4520 [1] WASHER-SPECIAL  
19. 4T-4528 [1] RETAINER  
20. 4T-4526 [1] SEAT  
21. 7J-0204 [1] SEAL-O-RING  
22. 8T-2360 [1] SEAL-O-RING  
23. 5B-9318 [1] BALL  
24. 155-9836 [1] VALVE GP-CHECK  
25. 3J-7354 [1] SEAL-O-RING  
26. 126-5985 [1] RING-BACKUP  
27. 1P-7363 [1] SEAL-O-RING  
28. 126-5984 [1] RING-BACKUP  
29. 8T-2361 [1] SEAL-O-RING  
30. 8F-6302 [2] BOLT (1/4-20X3.75-IN)  
31. 9T-0704 [1] VALVE GP-RELIEF (LINE)  
32. 4K-1388 [1] SEAL-O-RING  
33. 6E-0358 [1] RING-BACKUP  
34. 5K-9090 [1] SEAL-O-RING  
 

#SEBP28830532
 

130-6520: VALVE GP-CONTROL

130-6520 VALVE GP-CONTROL -LIFT
S/N 2CR16212-19309
PART OF 159-7557 VALVE GP-BANK 2, 159-7558 VALVE GP-BANK 3
AN ATTACHMENT
i01041905 SEBP2883
1306520 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-4524 [1] GUARD-DUST  
2. 031-0214 [2] BOLT-LOCKING (1/4-20X0.5-IN)  
3. 4T-4531 [1] PLUG  
4. 4T-4513 [1] SPRING  
5. 100-3567 [1] HOUSING-DETENT  
6. 100-3566 [1] PISTON-DETENT  
7. 4B-9782 [1] BALL  
8. 4T-4532 [1] HOUSING  
9. 144-4277 [1] SHAFT AS-DETENT  
10. 8S-4710 [2] BOLT (1/4-20X4-IN)  
11. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 100-3564 [1] SPRING  
13. 4T-4521 [2] RETAINER  
14. 100-3563 [1] SPACER  
15. 8F-0212 [1] SEAL-O-RING  
16. 6E-4317 [1] SPRING  
17. 2M-9780 [1] SEAL-O-RING  
18. 9S-8006 [1] PLUG (7/8-14-THD)  
19. 4T-4520 [1] WASHER-SPECIAL  
20. 4T-4528 [1] RETAINER  
21. 126-5476 [1] SEAT AS-SHUTTLE  
21A. 4T-7807 [1] RING-BACKUP  
21B. 7J-0204 [1] SEAL-O-RING  
21C. 8T-2360 [1] SEAL-O-RING  
22. 5B-9318 [7] BALL  
23. 155-9836 [1] VALVE GP-CHECK (BLADE LIFT)  
23A. 1P-7363 [1] SEAL-O-RING  
23B. 3J-7354 [1] SEAL-O-RING  
23C. 8T-2361 [1] SEAL-O-RING  
23D. 126-5984 [1] RING-BACKUP  
23E. 126-5985 [1] RING-BACKUP  
24. 4K-1388 [1] SEAL-O-RING  
25. 6E-0358 [1] RING-BACKUP  
26. 5K-9090 [1] SEAL-O-RING  
27. 128-2776 [1] GASKET  
28. 195-2139 [1] SEAL-O-RING  
 

#SEBP28830533
 

132-5134: VALVE GP-CONTROL

132-5134 VALVE GP-CONTROL -EXTENDABLE STICK
S/N 2CR16212-19309
PART OF 161-6740 VALVE GP-BANK 7
AN ATTACHMENT
i00496310 SEBP2883
1325134 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 031-5085 [1] BOLT-LOCKING (1/4-20X1-IN)  
2. 4T-4533 [1] SPACER (7.1X17.3X1.5-MM THK)  
3. 4T-4521 [2] RETAINER  
4. 6E-0131 [2] WASHER  
5. 9T-0653 [1] SPRING  
6. 7F-8607 [2] SEAL-O-RING  
7. 031-0214 [2] BOLT-LOCKING (1/4-20X0.5-IN)  
8. 4T-4528 [1] RETAINER  
9. 4T-4524 [1] GUARD-DUST  
10. 4T-4520 [1] WASHER-SPECIAL  
11. 9S-8006 [1] PLUG (7/8-14-THD)  
12. 2M-9780 [1] SEAL-O-RING  
13. 6E-4317 [1] SPRING  
14. 5K-9090 [2] SEAL-O-RING  
15. 126-5476 [1] SEAT AS-SHUTTLE  
16. 7J-0204 [1] SEAL-O-RING  
17. 8T-2360 [1] SEAL-O-RING  
18. 4T-7807 [1] RING-BACKUP  
19. 5B-9318 [1] BALL  
20. 155-9836 [1] VALVE GP-CHECK (BLADE LIFT)  
21. 8T-2361 [1] SEAL-O-RING  
22. 1P-7363 [1] SEAL-O-RING  
23. 3J-7354 [1] SEAL-O-RING  
24. 126-5985 [1] RING-BACKUP  
25. 126-5984 [1] RING-BACKUP  
26. 4T-4531 [2] PLUG  
27. 4K-1388 [2] SEAL-O-RING  
28. 6E-0358 [2] RING-BACKUP  
29. 8H-0707 [2] BOLT (1/4-20X1-IN)  
30. 167-6768 [1] HOUSING  
 

#SEBP28830534
 

152-8183: VALVE GP-CONTROL

152-8183 VALVE GP-CONTROL -STABILIZER
S/N 2CR16212-19309
PART OF 161-6739 VALVE GP-BANK 6, 161-6740 VALVE GP-BANK 7
AN ATTACHMENT
i00727965 SEBP2883
1528183 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-4524 [1] GUARD-DUST  
2. 031-0214 [2] BOLT-LOCKING (1/4-20X0.5-IN)  
3. 7F-8607 [2] SEAL-O-RING  
4. 6E-6280 Y [1] VALVE GP-CHECK  
5. 4T-4516 [1] SPRING  
6. 167-6768 [1] HOUSING  
7. 031-5085 [1] BOLT-LOCKING (1/4-20X1-IN)  
8. 4T-4521 [2] RETAINER  
9. 4T-4533 [1] SPACER (7.1X17.3X1.5-MM THK)  
10. 2M-9780 [1] SEAL-O-RING  
11. 9S-8006 [1] PLUG (7/8-14-THD)  
12. 4T-4520 [1] WASHER-SPECIAL  
13. 4T-4528 [1] RETAINER  
14. 126-5476 [1] SEAT AS-SHUTTLE  
  4T-7807 [1] RING-BACKUP  
  7J-0204 [1] SEAL-O-RING  
  8T-2360 [1] SEAL-O-RING  
15. 5B-9318 [1] BALL  
16. 126-5796 [1] VALVE GP-SHUTTLE (BLADE LIFT)  
  8T-2361 [1] SEAL-O-RING  
  1P-7363 [1] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  126-5984 [1] RING-BACKUP  
  126-5985 [1] RING-BACKUP  
17. 8H-0707 [2] BOLT (1/4-20X1-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28830535
 

159-7567: VALVE GP-CONTROL

159-7567 VALVE GP-CONTROL
S/N 2CR16212-19309
PART OF 161-6739 VALVE GP-BANK 6, 161-6740 VALVE GP-BANK 7
AN ATTACHMENT
i01028223 SEBP2883
1597567 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-4524 [1] GUARD-DUST  
2. 031-0214 [2] BOLT-LOCKING (1/4-20X0.5-IN)  
3. 9T-1465 [1] VALVE GP (RELIEF)  
  4K-1388 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  6E-0358 [1] RING-BACKUP  
4. 6E-6285 [1] VALVE GP-RELIEF (LINE, BOOM CYLINDER HEAD END)  
  4K-1388 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  6E-0358 [1] RING-BACKUP  
5. 195-2406 [1] SPRING  
6. 9T-0650 [1] BOLT-SPECIAL  
7. 167-6768 [1] HOUSING  
8. 4T-4521 [2] RETAINER  
9. 4J-7533 [1] SEAL-O-RING  
10. 195-2139 [2] SEAL-O-RING  
11. 137-9463 [1] SPRING  
12. 2M-9780 [1] SEAL-O-RING  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
14. 4T-4520 [1] WASHER-SPECIAL  
15. 4T-4528 [1] RETAINER  
16. 126-5476 [1] SEAT AS-SHUTTLE  
  4T-7807 [1] RING-BACKUP  
  7J-0204 [1] SEAL-O-RING  
  8T-2360 [1] SEAL-O-RING  
17. 5B-9318 [1] BALL  
18. 126-5796 [1] VALVE GP-SHUTTLE (BLADE LIFT)  
  1P-7363 [1] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  8T-2361 [1] SEAL-O-RING  
  126-5984 [1] RING-BACKUP  
  126-5985 [1] RING-BACKUP  
19. 8H-0707 [2] BOLT (1/4-20X1-IN)  
 

#SEBP28830536
 

166-7950: VALVE GP-CONTROL

166-7950 VALVE GP-CONTROL -SWING
S/N 2CR16212-19309
PART OF 161-6739 VALVE GP-BANK 6, 161-6740 VALVE GP-BANK 7
AN ATTACHMENT
i01035682 SEBP2883
1667950 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-4524 [1] GUARD-DUST  
2. 031-0214 [2] BOLT-LOCKING (1/4-20X0.5-IN)  
3. 137-9466 [2] VALVE GP-RELIEF (LINE, BOOM SWING)  
  147-1659 [1] KIT-SEAL  
    (INCLUDES O-RING & BACKUP RINGS)
4. 9T-0653 [1] SPRING  
5. 0S-1614 [1] BOLT (1/4-20X0.5-IN)  
6. 167-6768 [1] HOUSING  
7. 4T-4521 [2] RETAINER  
8. 9X-2027 [1] WASHER (11X18X2-MM THK)  
9. 7F-8607 [2] SEAL-O-RING  
10. 6E-4317 [1] SPRING  
11. 126-5796 [1] VALVE GP-SHUTTLE (BLADE LIFT)  
  1P-7363 [1] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  8T-2361 [1] SEAL-O-RING  
  126-5984 [1] RING-BACKUP  
  126-5985 [1] RING-BACKUP  
12. 2M-9780 [1] SEAL-O-RING  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
14. 4T-4520 [1] WASHER-SPECIAL  
15. 4T-4528 [1] RETAINER  
16. 126-5476 [1] SEAT AS-SHUTTLE  
  4T-7807 [1] RING-BACKUP  
  7J-0204 [1] SEAL-O-RING  
  8T-2360 [1] SEAL-O-RING  
17. 5B-9318 [1] BALL  
18. 8H-0707 [2] BOLT (1/4-20X1-IN)  
19. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
 

#SEBP28830537
 

6E-6287: VALVE GP-CONTROL

6E-6287 VALVE GP-CONTROL -EXTENDABLE STICK
S/N 2CR16212-19309
PART OF 112-1841 VALVE GP-BANK 1
AN ATTACHMENT
i00402719 SEBP2883
6E6287 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8B-2377 [2] BOLT (1/4-20X2-IN)  
2. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 4T-4532 [1] HOUSING  
4. 031-5085 [1] BOLT-LOCKING (1/4-20X1-IN)  
5. 4T-4533 [1] SPACER (7.1X17.3X1.5-MM THK)  
6. 4T-4521 [2] RETAINER  
7. 6E-0131 [2] WASHER  
8. 195-2406 [1] SPRING  
9. 195-2139 [2] SEAL-O-RING  
10. 031-0214 [2] BOLT-LOCKING (1/4-20X0.5-IN)  
11. 4T-4528 [1] RETAINER  
12. 4T-4524 [1] GUARD-DUST  
13. 4T-4520 [1] WASHER-SPECIAL  
14. 9S-8006 [1] PLUG (7/8-14-THD)  
15. 2M-9780 [1] SEAL-O-RING  
16. 6E-4317 [1] SPRING  
17. 5K-9090 [2] SEAL-O-RING  
18. 126-5476 [1] SEAT AS-SHUTTLE  
  7J-0204 [1] SEAL-O-RING  
  4T-7807 [1] RING-BACKUP  
  8T-2360 [1] SEAL-O-RING  
19. 7J-0204 [1] SEAL-O-RING  
20. 8T-2360 [1] SEAL-O-RING  
21. 5B-9318 [1] BALL  
22. 8T-2361 [1] SEAL-O-RING  
23. 1P-7363 [1] SEAL-O-RING  
24. 3J-7354 [1] SEAL-O-RING  
25. 126-5796 [1] VALVE GP-SHUTTLE (BLADE LIFT)  
  8T-2361 [1] SEAL-O-RING  
  1P-7363 [1] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  126-5984 [1] RING-BACKUP  
  126-5985 [1] RING-BACKUP  
26. 4T-4531 [2] PLUG  
27. 4K-1388 [2] SEAL-O-RING  
28. 6E-0358 [2] RING-BACKUP  
 

#SEBP28830538
 

6E-6289: VALVE GP-CONTROL

6E-6289 VALVE GP-CONTROL -BACKHOE BUCKET
S/N 2CR16212-19309
PART OF 161-6739 VALVE GP-BANK 6, 161-6740 VALVE GP-BANK 7
AN ATTACHMENT
i00402724 SEBP2883
6E6289 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-4524 [1] GUARD-DUST  
2. 031-0214 [2] BOLT-LOCKING (1/4-20X0.5-IN)  
3. 6E-6282 [1] VALVE GP-RELIEF (PILOT OPERATED)  
3A. 4K-1388 [1] SEAL-O-RING  
3B. 6E-0358 [1] RING-BACKUP  
3C. 5K-9090 [1] SEAL-O-RING  
3D. 3K-0360 [1] SEAL-O-RING  
4. 6E-6283 Y [1] VALVE GP-RELIEF  
5. 031-5085 [1] BOLT-LOCKING (1/4-20X1-IN)  
6. 167-6768 [1] HOUSING  
7. 4T-4521 [2] RETAINER  
8. 4T-4533 [1] SPACER (7.1X17.3X1.5-MM THK)  
9. 195-2406 [1] SPRING  
10. 195-2139 [2] SEAL-O-RING (18.72MM ID)  
11. 137-9463 [1] SPRING  
12. 2M-9780 [1] SEAL-O-RING  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
14. 4T-4520 [1] WASHER-SPECIAL  
15. 4T-4528 [1] RETAINER  
16. 126-5476 [1] SEAT AS-SHUTTLE  
16A. 7J-0204 [1] SEAL-O-RING  
16B. 8T-2360 [1] SEAL-O-RING  
16C. 4T-7807 [1] RING-BACKUP  
17. 5B-9318 [1] BALL  
18. 126-5796 [1] VALVE GP-SHUTTLE (BLADE LIFT)  
18A. 8T-2361 [1] SEAL-O-RING  
18B. 1P-7363 [1] SEAL-O-RING  
18C. 3J-7354 [1] SEAL-O-RING  
18D. 126-5984 [1] RING-BACKUP  
18E. 126-5985 [1] RING-BACKUP  
19. 8H-0707 [2] BOLT (1/4-20X1-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28830539
 

103-5519: VALVE GP-PUMP CONTROL

103-5519 VALVE GP-PUMP CONTROL -POWER COMPENSATOR
S/N 2CR16212-19309
PART OF 161-6634 PUMP GP-PISTON
i00469120 SEBP2883
1035519 VALVE GP-PUMP CONTROL Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-1434 [1] PLUG  
2. 5P-5599 [1] SEAL-O-RING  
3. 105-1435 [1] SPRING  
4. 105-1436 [1] RETAINER-SPRING  
5. 214-0592 [1] GASKET  
6. 6V-8236 [1] PIN-SPRING  
7. 6E-6528 [1] SEAL  
8. 3T-0849 M [2] BOLT-SOCKET HEAD (M6X1X25-MM)  
9. 105-1437 [1] RETAINER-SPRING  
10. 105-1438 [1] SPRING  
11. 033-6044 [1] SEAL-O-RING  
12. 105-1439 [1] ADJUSTER  
13. 105-1440 [1] CAP  
14. 105-1441 [1] PLUG  
  M   METRIC PART
 

Information:

Service Letter-NACD
Product Support Program For Minimizing Swing Drift That Can Occur While Roading Or Using The Loader Without The Swing Pin Installed On Certain 416C, 426C, 436C, 428B, 428C, 438B And 438C Backhoe Loaders
Product Support Program For Minimizing Swing Drift That Can Occur While Roading Or Using The Loader Without The Swing Pin Installed On Certain 416C, 426C, 436C, 428B, 428C, 438B And 438C Backhoe Loaders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Limiting Hydraulic Oil Flow When Using Auxiliary Valves
Limiting Hydraulic Oil Flow When Using Auxiliary Valves
Regulate Oil Flow For Supplier Attachments
Regulate Oil Flow For Supplier Attachments
Specifications
Control Valve (Lift)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Control Valve (Tilt)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Control Valve (Auxiliary)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bank Valve (Backhoe and Stabilizer)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Control Valve (Extendable Stick)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Control Valve (Stick)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Control Valve (Backhoe Bucket)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Control Valve (Stabilizer)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Control Valve (Swing)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Control Valve (Boom)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bank Valve (Backhoe and Stabilizer)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Tool Operating Manual
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Letter-China
Product Support Program For Minimizing Swing Drift That Can Occur While Roading Or Using The Loader Without The Swing Pin Installed On Certain 416C, 426C, 436C, 428B, 428C, 438B And 438C Backhoe Loaders
Product Support Program For Minimizing Swing Drift That Can Occur While Roading Or Using The Loader Without The Swing Pin Installed On Certain 416C, 426C, 436C, 428B, 428C, 438B And 438C Backhoe Loaders
Service Letter-Asia
Systems Operation
Control Valve (Loader)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Control Valve (Backhoe)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Service Letter-APD
Product Support Program For Minimizing Swing Drift That Can Occur While Roading Or Using The Loader Without The Swing Pin Installed On Certain 416C, 426C, 436C, 428B, 428C, 438B And 438C Backhoe Loaders
Product Support Program For Minimizing Swing Drift That Can Occur While Roading Or Using The Loader Without The Swing Pin Installed On Certain 416C, 426C, 436C, 428B, 428C, 438B And 438C Backhoe Loaders
Disassembly and Assembly
Loader Implement Control Group
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Backhoe & Stabilizer Implement Control Valve
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Service Magazine
New End Cover For Control Valve Group Can Be Used With Or Without Additional Hydraulic Circuits (Power Beyond) {5051}
1997/11/17
New Swing Control Valve Prevents Swing Drift {5454,5480}
1999/06/28
Resolvers Used In C-Series Backhoe Loader {5481}
1999/08/30
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22
Serviceable Parts Are Available for the Swing Circuit Line Relief Valve {5454, 5480}
2000/02/28
A New O-Ring Seal Reduces Leakage from the End of the Spool {5051}
2000/12/18
Service Spools for Backhoe Valves {5051}
2002/01/28
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28

Caterpillar Parts SIS Catalog 428C :

VALVE GP-CONTROL
124-8816 VALVE GP-CONTROL
VALVE GP-CHECK
6E-6280 VALVE GP-CHECK
150-3034 VALVE GP-CHECK
VALVE GP-BANK 7
161-6740 VALVE GP-BANK 7
VALVE GP-BANK 6
161-6739 VALVE GP-BANK 6
VALVE GP-BANK 3
159-7558 VALVE GP-BANK 3
VALVE GP-BANK 2
159-7557 VALVE GP-BANK 2
VALVE GP-BANK 1
112-1841 VALVE GP-BANK 1
VALVE GP-CONTROL
124-8820 VALVE GP-CONTROL
VALVE GP-CONTROL
130-6520 VALVE GP-CONTROL
VALVE GP-CONTROL
132-5134 VALVE GP-CONTROL
VALVE GP-CONTROL
152-8183 VALVE GP-CONTROL
VALVE GP-CONTROL
159-7567 VALVE GP-CONTROL
VALVE GP-CONTROL
166-7950 VALVE GP-CONTROL
VALVE GP-CONTROL
6E-6287 VALVE GP-CONTROL
VALVE GP-CONTROL
6E-6289 VALVE GP-CONTROL

Truck sale:

Caterpillar 428C, Construction
53,468 
Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar 428C, Construction
53,468 
Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
 
$25,882 USD 
CATERPILLAR 428C 2000
- BACKHOE LOADERS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
CATERPILLAR 428C 2000
 
CATERPILLAR 428C 2000
- BACKHOE LOADERS
CAVILL POWER PRODUCTS PTY. LTD.
315 Main North Road ENFIELD - ADELAIDE -
CATERPILLAR 428C 1998
 
CATERPILLAR 428C 1998
- BACKHOE LOADERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.