AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9W-1880 TOOTH GP-UNI S/N 2CR16212-19309 PART OF 127-7011, 130-2055, 131-2120, 9R-6512 BUCKET GP-HOE AN ATTACHMENT 428C


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
OPERATOR STATION
AIR CONDITIONER GP
CAB GP

BACKHOE LOADER 428C BACKHOE LOADER 2CR
 428C Backhoe Loader Side Shift, Parallel Lift 2CR16212-19309 (MACHINE) POWERED BY 3054 Engine SEBP2883 428C 2CR   (1995)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
9W-8209 TIP-PENETRATION
TOOTH GP-UNI
9R-5866 TOOTH GP-UNI
TOOTH GP-UNI
9W-1880 TOOTH GP-UNI
 

#SEBP28830710
 

9W-1880: TOOTH GP-UNI

9W-1880 TOOTH GP-UNI
S/N 2CR16212-19309
PART OF 127-7011, 130-2055, 131-2120, 9R-6512 BUCKET GP-HOE
AN ATTACHMENT
i00447265 SEBP2883
9W1880 TOOTH GP-UNI Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8203 [1] TOOTH  
2. 4F-3656 [2] BOLT-PLOW (5/8-11X2.5-IN)  
3. 4K-0367 [2] NUT-FULL (5/8-11-THD)  
 

#SEBP28830711
 

144-2221: AIR CONDITIONER AR

144-2221 AIR CONDITIONER AR
S/N 2CR16212-19309
EMISSIONS ENGINE
AN ATTACHMENT
i00661114 SEBP2883
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  104-9478 Y [1] AIR CONDITIONER GP  
  137-7140 Y [1] COMPRESSOR & MTG GP-REFRIG  
  144-2222 Y [1] CONDENSER & MTG GP-REFRIGERANT  
  145-7179 Y [1] LINES GP-AIR CONDITIONER  
  121-9752 Y [1] MOUNTING GP-RADIO  
  104-9499 Y [1] WIRING GP-AIR CONDITIONER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28830712
 

145-7168: AIR CONDITIONER AR

145-7168 AIR CONDITIONER AR
S/N 2CR16212-19309
NON-EMISSIONS
AN ATTACHMENT
i00672253 SEBP2883
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  104-9478 Y [1] AIR CONDITIONER GP  
  7E-4641 Y [1] COMPRESSOR & MTG GP-REFRIG  
  144-2222 Y [1] CONDENSER & MTG GP-REFRIGERANT  
  145-7179 Y [1] LINES GP-AIR CONDITIONER  
  121-9752 Y [1] MOUNTING GP-RADIO  
  104-9499 Y [1] WIRING GP-AIR CONDITIONER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28830713
 

104-9478: AIR CONDITIONER GP

104-9478 AIR CONDITIONER GP
S/N 2CR16212-19309
PART OF 144-2221, 145-7168 AIR CONDITIONER AR
AN ATTACHMENT
i00720741 SEBP2883
1049478 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-0099 [2] KNOB-CONTROL  
2. 3S-2093 [2] STRAP-CABLE  
3. 7K-3262 [2] SCREW (THUMB)  
4. 7T-9793 [2] VALVE-CHECK  
5. 8Y-6388 [6] LOUVER AS-VENT  
6. 9R-9901 [2] FASTENER (CLIP)  
7. 084-4277 [1] LAMP GP-DOME (12-VOLT)  
  6R-7490 [1] LAMP (12-VOLT, 10-WATT)  
8. 104-2091 [12] SCREW-FLAT HEAD (6-20X0.5-IN)  
9. 104-9481 [1] FILTER ELEMENT-ENCLOSURE AIR  
10. 104-9485 [1] BRACKET AS  
11. 104-9486 [1] COVER-POST  
12. 123-0253 [1] BRACKET AS  
13. 124-0256 [1] PLATE  
14. 131-5492 [2] RETAINER-CAPTIVE  
15. 131-8158 [2] PLATE  
16. 133-7655 [1] FILM-CONTROL  
17. 134-1224 [2] GRILL  
18. 134-2558 [1] COVER  
19. 142-9660 Y [1] AIR CONDITIONER GP  
20. 144-9973 [6] CLAMP  
21. 146-6919 [1] LINER-CAB  
22. 149-1507 [1] LINER AS-CAB  
  131-9253 [1] DUCT  
  131-9254 [1] DUCT  
  133-4964 [8] NUT-JACK  
23. 151-1264 [2] ELBOW  
24. 158-5064 [1] DUCT  
25. 158-5065 [1] DUCT  
26. 5P-4115 [3] WASHER-HARD (7.2X19X2-MM THK)  
27. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
28. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4137 M [9] BOLT (M10X1.5X20-MM)  
30. 8T-4138 M [3] BOLT (M6X1X20-MM)  
31. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
32. 8Y-7446 [4] SCREW-PAN HEAD  
33. 5P-6129 D TUBE (6-M)  
34. 129-1854 E FASTENER-LOOP  
35. 129-1855 E FASTENER-HOOK  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28830714
 

142-9660: AIR CONDITIONER GP

142-9660 AIR CONDITIONER GP
S/N 2CR16212-19309
PART OF 104-9478 AIR CONDITIONER GP, 148-9152 KIT-AIR CONDITIONER
AN ATTACHMENT AND FIELD INSTALLATION
i00720861 SEBP2883
1429660 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-8715 [1] GROMMET  
2. 2P-4339 [4] NUT-JAM (7/16-28-THD)  
3. 2S-3745 [4] SCREW-TAPPING (10-16X0.5-IN)  
4. 174-1490 [1] MOTOR AS-ELECTRIC  
  7T-0093 [2] PIN-CONNECTOR (12-GA TO 14-GA)  
  177-9645 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  177-9643 [1] LOCK  
  177-9644 [1] SEAL-RECEPTACLE  
5. 6P-3236 [1] SWITCH AS-ROTARY  
  6V-8362 [5] SCREW-MACHINE (8-32X0.31-IN)  
  9B-7233 [5] LOCKWASHER  
6. 7X-2049 [1] TUBE AS  
7. 8C-3756 [1] FILM-IDENTIFICATION (AIR CONDITIONER)  
8. 8C-4586 [2] CLAMP  
9. 8C-7581 M [1] SCREW-MACHINE (M4X0.7X8-MM)  
10. 100-3426 [2] WHEEL AS-BLOWER  
11. 124-7141 [2] WASHER-SPECIAL  
12. 129-1274 [4] FASTENER AS-AIR CONDITIONER  
13. 133-9012 [1] FUSE (15-AMPERE)  
14. 134-2885 [1] RESISTOR  
15. 141-9784 M [1] BOLT (M6X1X190-MM)  
16. 147-1481 [1] COVER  
17. 147-1482 [1] PLATE AS  
18. 147-1483 [1] BLOWER AS  
19. 147-1484 [1] PLATE AS  
20. 147-1486 [1] COIL AS-EVAPORATOR  
21. 147-1487 [1] GASKET  
22. 148-1319 [1] GASKET  
23. 148-1903 [1] GASKET  
24. 148-5557 [1] INSULATION  
25. 148-6737 [1] SWITCH AS-TEMPERATURE  
26. 148-6751 [1] HARNESS AS-HEATER & AIR COND  
  7K-4474 [1] CONNECTOR AS  
  6K-7361 [1] CONNECTOR-BULLET  
  6T-6505 [7] HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8L-8413 [5] STRAP-CABLE (WHITE)  
  2L-8069 [1] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  8T-9850 [5] TERMINAL-BLADE (10-GA TO 12-GA)  
  6T-6506 [2] TERMINAL-BLADE (14-GA TO 18-GA)  
  5P-1477 [4] TERMINAL-FORK (10-GA TO 12-GA, NO. 8 SCREW)  
  5P-1475 [1] TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)  
27. 151-8373 [1] GASKET  
28. 151-8376 [1] PLATE-ORIFICE  
29. 151-8377 [1] PLATE-ORIFICE  
30. 154-5630 [1] GASKET  
31. 154-5631 [1] GASKET  
32. 129-3178 M [19] LOCKNUT (M6X1-THD)  
33. 3S-2093 [2] STRAP-CABLE  
34. 6V-1668 [2] WASHER (6.5X29.1X3-MM THK)  
35. 6V-7728 M [1] BOLT (M6X1X45-MM)  
36. 8M-2771 [1] CLIP  
37. 8T-4171 M [4] BOLT (M6X1X12-MM)  
38. 8T-4205 [25] WASHER-HARD (7.2X14.5X2-MM THK)  
39. 152-6609 E SEAL-BULK (86-CM)  
40. 5P-6410 D SEAL (0.5-M)  
41. 4K-2089 [4] RIVET-POP  
42. 5P-5637 [2] SEAL  
43. 147-1485 [2] GASKET-DUCT  
44. 6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP28830715
 

154-5475: CAB AR-ENCLOSED ROPS

154-5475 CAB AR-ENCLOSED ROPS
S/N 2CR16212-19309
AN ATTACHMENT
i01120670 SEBP2883
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  104-3447 Y [1] CAB GP-ENCLOSED ROPS  
    -OR-
  154-5478 Y [1] CAB GP  
  104-6044 Y [1] CONSOLE GP-FRONT  
  3E-8211 E FILM-STRIPE (400CM)  
  110-0037 [1] FILM (CATERPILLAR, SUN VISOR)  
  104-6045 Y [1] FLOORPLATE GP  
  104-6038 Y [1] HEATER GP-CAB  
  104-6043 Y [1] LINES GP-HEATER  
  131-2747 [1] MAT-PROTECTIVE  
  104-6031 Y [1] WASHER GP-WINDOW  
  Y [1] WIPER GP-WINDOW  
  105-5155 Y [1] WIRING GP-CAB  
  154-5414 Y [1] WIRING GP-ENGINE  
  104-5969 Y [1] WIRING GP-POWER RECEPTACLE  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP28830716
 

154-5478: CAB GP

154-5478 CAB GP
S/N 2CR16999-19309
PART OF 154-5475 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
i00977788 SEBP2883
1545478 CAB GP Parts scheme 1545478 CAB GP Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-3449 Y [1] CAB GP-ENCLOSED ROPS  
2. 104-5961 [1] HARNESS AS-PLATFORM (COSA)  
3. 3S-2093 [25] STRAP-CABLE  
4. 8Y-7252 J [1] GLASS (WINDSHIELD)  
5. 8Y-7253 J [1] GLASS-CAB  
6. 8Y-7254 J [1] GLASS-CAB  
7. 100-7053 [1] FENDER  
8. 100-7052 [1] FENDER  
9. 5P-5992 E HOSE (410CM EACH)  
10. 5P-4116 [31] WASHER-HARD (8.8X20.5X2-MM THK)  
11. 8T-4908 M [18] BOLT (M8X1.25X25-MM)  
12. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
13. 5C-7261 M [5] NUT (M8X1.25-THD)  
14. 6V-1392 D SEAL (.6M)  
15. 8T-4222 [2] WASHER-PLATED (11X32X2.5-MM THK)  
16. 104-3918 [2] PLATE  
17. 106-1742 [6] PLATE  
18. 128-7772 [1] PLATE (LH)  
19. 128-7773 [1] PLATE (RH)  
20. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
21. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
22. 8Y-7256 Y [1] WINDOW GP-CAB (REAR)  
23. 131-3987 M [13] SCREW (M4X0.7X12-MM)  
24. 147-1982 [1] CHANNEL  
25. 147-1980 [1] CHANNEL AS  
26. 159-4945 [2] KEEPER (LH)  
27. 159-4946 [2] KEEPER  
28. 8Y-7274 J [1] GLASS (LH)  
29. 8Y-7272 J [1] GLASS (RH)  
30. 134-3061 [1] PLATE  
31. 134-3060 [1] PLATE  
32. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
33. 154-5426 Y [1] WINDOW GP-CAB (RH)  
34. 154-5425 Y [1] WINDOW GP-CAB (LH)  
35. Y [1] DOOR GP-CAB (LH)  
36. Y [1] DOOR GP-CAB (RH)  
37. 129-5257 [8] BUSHING  
38. 129-5256 [12] BUSHING  
39. 8Y-7444 [2] PIN  
40. 8S-7803 [8] RING-RETAINING  
41. 117-7414 [2] PIN  
42. 131-3986 M [2] SCREW (M4X0.7X12-MM)  
43. 108-4311 [2] SCREW-MACHINE (3/8-16X0.75-IN)(3/8-16THD (HEX))  
44. 134-3062 [2] STRIKER  
45. 134-3503 [1] GUARD-STRIKER  
46. 134-3059 [1] GUARD  
47. 4P-7581 [1] CLIP (LADDER)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   USE ADHESIVE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28830717
 

104-3447: CAB GP-ENCLOSED ROPS

104-3447 CAB GP-ENCLOSED ROPS
S/N 2CR16212-16998
PART OF 154-5475 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
i00473053 SEBP2883
1043447 CAB GP-ENCLOSED ROPS Parts scheme 1043447 CAB GP-ENCLOSED ROPS Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-3449 Y [1] CAB GP-ENCLOSED ROPS  
2. 104-5961 [1] HARNESS AS-PLATFORM (COSA)  
3. 3S-2093 [25] STRAP-CABLE  
4. 8Y-7252 [1] GLASS  
5. 8Y-7254 [1] GLASS-CAB  
6. 8Y-7253 [1] GLASS-CAB  
7. 100-7053 [1] FENDER  
8. 100-7052 [1] FENDER  
9. 5P-5992 B HOSE (8.2M)  
10. 5P-4116 [31] WASHER-HARD (8.8X20.5X2-MM THK)  
11. 8T-4908 M [18] BOLT (M8X1.25X25-MM)  
12. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
13. 5C-7261 M [5] NUT (M8X1.25-THD)  
14. 6V-1392 E SEAL (60CM)  
15. 8T-4222 [2] WASHER-PLATED (11X32X2.5-MM THK)  
16. 104-3918 [2] PLATE  
17. 106-1742 [6] PLATE  
18. 128-7772 [1] PLATE (LH)  
19. 128-7773 [1] PLATE (RH)  
20. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
21. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
22. 8Y-7256 Y [1] WINDOW GP-CAB (REAR)  
23. 131-3987 M [5] SCREW (M4X0.7X12-MM)  
24. 8Y-7270 [1] CHANNEL  
25. 8Y-7267 [1] CHANNEL  
26. 9X-2044 M [8] SCREW-TRUSS HEAD (M6X1X16-MM)  
27. 104-9475 [4] PLATE AS  
28. 8Y-7274 [1] GLASS  
29. 8Y-7272 [1] GLASS  
30. 134-3061 [1] PLATE  
31. 134-3060 [1] PLATE  
32. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
33. 130-3492 Y [1] DOOR GP-CAB (LH)  
34. 104-7011 Y [1] DOOR GP-CAB (RH)  
35. 129-8842 Y [1] WINDOW GP-CAB (LH)  
36. 129-8841 Y [1] WINDOW GP-CAB (RH)  
37. 129-5257 [8] BUSHING  
38. 129-5256 [12] BUSHING  
39. 8Y-7444 [2] PIN  
40. 8S-7803 [8] RING-RETAINING  
41. 117-7414 [2] PIN  
42. 131-3986 M [2] SCREW (M4X0.7X12-MM)  
43. 108-4311 [2] SCREW-MACHINE (3/8-16X0.75-IN)  
44. 134-3062 [2] STRIKER  
45. 134-3503 [1] GUARD-STRIKER  
46. 134-3059 [1] GUARD  
47. 4P-7581 [1] CLIP (LADDER)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28830718
 

104-3449: CAB GP-ENCLOSED ROPS

104-3449 CAB GP-ENCLOSED ROPS
S/N 2CR16212-19309
PART OF 154-5478 CAB GP, 104-3447 CAB GP-ENCLOSED ROPS
AN ATTACHMENT
i00473057 SEBP2883
1043449 CAB GP-ENCLOSED ROPS Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-3490 M [9] NUT-WELD (M10X1.5-THD)  
2. 8Y-7311 [2] HINGE  
3. 7T-1099 [15] LINK  
4. 113-5973 [6] HINGE  
5. [1] CANOPY AS  
6. 140-2959 [1] HANDHOLD  
7. 8Y-7292 [1] HANDHOLD  
8. 6V-9632 M [5] NUT-WELD (M6X1-THD)  
9. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
  M   METRIC PART
 

#SEBP28830719
 

163-9193: CANOPY AR-OPEN ROPS

163-9193 CANOPY AR-OPEN ROPS
S/N 2CR16212-19309
AN ATTACHMENT
i01028171 SEBP2883
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  104-3452 Y [1] CANOPY GP-OPEN ROPS  
  104-3923 Y [1] CONSOLE GP-FRONT  
  132-5981 Y [1] COVER GP-HOOD  
  104-3913 Y [1] FLOORPLATE GP  
  131-3404 Y [1] WIRING GP-CANOPY  
  154-5414 Y [1] WIRING GP-ENGINE  
  104-5969 Y [1] WIRING GP-POWER RECEPTACLE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Bucket Tips - Inspect/Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Bucket Cutting Edges - Inspect/Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Bucket Tips - Inspect/Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}

Caterpillar Parts SIS Catalog 428C :

TOOTH GP-UNI
9R-5866 TOOTH GP-UNI
9W-8209 TIP-PENETRATION
9W-8208 TIP-PENETRATION
1U-3209 TIP-PENETRATION
4T-2203 TIP-ABRASION
PLATE GP-SIDE
101-4419 PLATE GP-SIDE
MOUNTING GP-FORK
9R-5430 MOUNTING GP-FORK
MOUNTING GP-FORK
108-1587 MOUNTING GP-FORK
144-2221 AIR CONDITIONER AR
145-7168 AIR CONDITIONER AR
AIR CONDITIONER GP
104-9478 AIR CONDITIONER GP
AIR CONDITIONER GP
142-9660 AIR CONDITIONER GP
154-5475 CAB AR-ENCLOSED ROPS
CAB GP
154-5478 CAB GP
CAB GP-ENCLOSED ROPS
104-3447 CAB GP-ENCLOSED ROPS
CAB GP-ENCLOSED ROPS
104-3449 CAB GP-ENCLOSED ROPS

Truck sale:

Caterpillar 428C, Construction
53,468 
Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar 428C, Construction
53,468 
Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
 
$25,882 USD 
CATERPILLAR 428C 2000
- BACKHOE LOADERS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
CATERPILLAR 428C 2000
 
CATERPILLAR 428C 2000
- BACKHOE LOADERS
CAVILL POWER PRODUCTS PTY. LTD.
315 Main North Road ENFIELD - ADELAIDE -
CATERPILLAR 428C 1998
 
CATERPILLAR 428C 1998
- BACKHOE LOADERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.