OPERATOR STATION
CONTROL GP-STEERINGCONTROL GP-TRANSMISSION
CONVERSION GP
CONSOLE GP
DOOR GP
OPERATOR STATION
CONTROL GP-STEERING
#SEBP28850640
159-4923: CONTROL GP-STEERING & XMSN
159-4923 CONTROL GP-STEERING & XMSN
S/N 1TR1284-1549; 2DR2717-3249
POWER SHIFT
Type 2
AN ATTACHMENT
S/N 1TR1284-1549; 2DR2717-3249
POWER SHIFT
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 438C BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-8894 M | [3] | BOLT-SOCKET HEAD (M10X1.5X20-MM) | |
| 2. | 117-7038 | [1] | STEERING COLUMN | |
| 149-0777 | [1] | KNOB | ||
| 149-0782 | [1] | KIT-TILT LEVER | ||
| (INCLUDES DOWEL PIN, COMPRESSION SPRING & TILT LEVER) | ||||
| 149-0783 | [1] | KIT-SHAFT | ||
| (INCLUDES RETAINING RING, O-RING & SHAFT PROTECTOR TOOL) | ||||
| 149-0784 | [1] | KIT-HOUSING | ||
| (INCLUDES RETAINING RING, SCREWS, DOWEL, O-RING & SHAFT PROTECTOR TOOL) | ||||
| 149-0785 | [1] | KIT-GAS SPRING | ||
| (INCLUDES DOWEL PINS, SCREWS, COMPRESSION SPRING & TILT LEVER) | ||||
| 3. | 174-6649 C | [1] | CONTROL GP-TRANSMISSION | |
| 4. | 8Y-7199 | [1] | PLATE | |
| 5. | 9X-2043 M | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 6. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 8. | 7X-6324 | [1] | CLAMP-COLUMN | |
| 9. | 9X-6615 M | [4] | BOLT (M5X0.8X30-MM) | |
| 10. | 6V-8227 M | [1] | NUT (M18X1.5-THD) | |
| 11. | 135-4566 B | [4] | SHIM (0.5-MM THK) | |
| 12. | 153-9580 Y | [1] | STEERING WHEEL GP | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28850641
159-4924: CONTROL GP-STEERING & XMSN
159-4924 CONTROL GP-STEERING & XMSN
S/N 1TR1284-1549
Type 1
CANNOT BE USED WITH POWER SHIFT OPTION
AN ATTACHMENT
S/N 1TR1284-1549
Type 1
CANNOT BE USED WITH POWER SHIFT OPTION
AN ATTACHMENT
For full view, you need register
Parts for your 438C BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-8894 M | [3] | BOLT-SOCKET HEAD (M10X1.5X20-MM) | |
| 2. | 101-2902 | [1] | STEERING COLUMN AS | |
| 6V-8227 M | [1] | NUT (M18X1.5-THD) | ||
| 6V-9632 M | [5] | NUT-WELD (M6X1-THD) | ||
| 8T-8874 M | [1] | NUT-WELD (M5X0.8-THD) | ||
| 9D-6621 | [2] | NUT-WELD (10-24-THD) | ||
| 3. | 137-8899 | [1] | CONTROL GP-TRANSMISSION | |
| 4. | 8Y-7199 | [1] | PLATE | |
| 5. | 9X-2043 M | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 6. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 8. | 7X-6325 | [1] | CLAMP-COLUMN | |
| 9. | 9X-6615 M | [4] | BOLT (M5X0.8X30-MM) | |
| 10. | 153-9580 Y | [1] | STEERING WHEEL GP | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28850642
159-4924: CONTROL GP-STEERING & XMSN
159-4924 CONTROL GP-STEERING & XMSN
S/N 1TR1284-1549
Type 2
CANNOT BE USED WITH POWER SHIFT OPTION
AN ATTACHMENT
S/N 1TR1284-1549
Type 2
CANNOT BE USED WITH POWER SHIFT OPTION
AN ATTACHMENT
For full view, you need register
Parts for your 438C BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-8894 M | [3] | BOLT-SOCKET HEAD (M10X1.5X20-MM) | |
| 2. | 101-2902 | [1] | STEERING COLUMN AS | |
| 6V-8227 M | [1] | NUT (M18X1.5-THD) | ||
| 6V-9632 M | [5] | NUT-WELD (M6X1-THD) | ||
| 8T-8874 M | [1] | NUT-WELD (M5X0.8-THD) | ||
| 9D-6621 | [2] | NUT-WELD (10-24-THD) | ||
| 3. | 166-7501 C | [1] | CONTROL GP-TRANSMISSION | |
| 4. | 8Y-7199 | [1] | PLATE | |
| 5. | 9X-2043 M | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 6. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 8. | 7X-6325 | [1] | CLAMP-COLUMN | |
| 9. | 9X-6615 M | [4] | BOLT (M5X0.8X30-MM) | |
| 10. | 153-9580 Y | [1] | STEERING WHEEL GP | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28850643
159-4925: CONTROL GP-STEERING & XMSN
159-4925 CONTROL GP-STEERING & XMSN
S/N 1TR1284-1549; 2DR2717-3249
POWER SHIFT
Type 1
AN ATTACHMENT
S/N 1TR1284-1549; 2DR2717-3249
POWER SHIFT
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 438C BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-8894 M | [3] | BOLT-SOCKET HEAD (M10X1.5X20-MM) | |
| 2. | 101-2902 | [1] | STEERING COLUMN AS | |
| 6V-8227 M | [1] | NUT (M18X1.5-THD) | ||
| 6V-9632 M | [5] | NUT-WELD (M6X1-THD) | ||
| 8T-8874 M | [1] | NUT-WELD (M5X0.8-THD) | ||
| 9D-6621 | [2] | NUT-WELD (10-24-THD) | ||
| 3. | 158-6209 | [1] | CONTROL GP-TRANSMISSION | |
| 4. | 8Y-7199 | [1] | PLATE | |
| 5. | 9X-2043 M | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 6. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 8. | 7X-6325 | [1] | CLAMP-COLUMN | |
| 9. | 9X-6615 M | [4] | BOLT (M5X0.8X30-MM) | |
| 10. | 153-9580 Y | [1] | STEERING WHEEL GP | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28850644
159-4925: CONTROL GP-STEERING & XMSN
159-4925 CONTROL GP-STEERING & XMSN
S/N 1TR1284-1549; 2DR2717-3249
POWER SHIFT
Type 2
AN ATTACHMENT
S/N 1TR1284-1549; 2DR2717-3249
POWER SHIFT
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 438C BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-8894 M | [3] | BOLT-SOCKET HEAD (M10X1.5X20-MM) | |
| 2. | 101-2902 | [1] | STEERING COLUMN AS | |
| 6V-8227 M | [1] | NUT (M18X1.5-THD) | ||
| 6V-9632 M | [5] | NUT-WELD (M6X1-THD) | ||
| 8T-8874 M | [1] | NUT-WELD (M5X0.8-THD) | ||
| 9D-6621 | [2] | NUT-WELD (10-24-THD) | ||
| 3. | 174-6649 | [1] | CONTROL GP-TRANSMISSION | |
| 4. | 8Y-7199 | [1] | PLATE | |
| 5. | 9X-2043 M | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 6. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 8. | 7X-6325 | [1] | CLAMP-COLUMN | |
| 9. | 9X-6615 M | [4] | BOLT (M5X0.8X30-MM) | |
| 10. | 153-9580 Y | [1] | STEERING WHEEL GP | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28850645
8Y-7482: CONTROL GP-TRANSMISSION
8Y-7482 CONTROL GP-TRANSMISSION
S/N 1TR1284-1549; 2DR2717-3249
PART OF 140-6157 POWER TRAIN AR
AN ATTACHMENT
S/N 1TR1284-1549; 2DR2717-3249
PART OF 140-6157 POWER TRAIN AR
AN ATTACHMENT
For full view, you need register
Parts for your 438C BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9R-1766 | [1] | COVER-BOTTOM | |
| 2. | 8T-9501 | [2] | SCREW (10-16X0.75-IN) | |
| 3. | 107-5591 | [1] | NUT-JAM (3/4-16-THD) | |
| 4. | 104-7883 | [1] | ROD AS | |
| 5. | 9R-1765 | [1] | COVER-TOP | |
| 6. | 8Y-7237 | [1] | SWITCH GP-ROCKER (NEUTRALIZER) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7. | 8T-4956 M | [1] | BOLT (M12X1.75X35-MM) | |
| 8. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 9. | 9R-9901 | [4] | FASTENER (CLIP) | |
| 10. | 8Y-7404 | [1] | BOOT | |
| 11. | 104-9490 | [1] | PLATE | |
| 12. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 13. | 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | |
| 14. | 9R-1767 | [1] | BOOT | |
| M | METRIC PART | |||
#SEBP28850646
163-9195: CONVERSION AR-NON-ROPS
For full view, you need register
#SEBP28850647
104-5962: COVER GP-CONSOLE
For full view, you need register
Parts for your 438C BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 170-0648 | [1] | PLATE | |
| 2. | 9C-9785 | [1] | BUMPER | |
| 3. | 166-8612 | [1] | COVER AS | |
| 4. | 109-8817 | [1] | SUPPORT AS | |
| 5. | 5P-9000 J | [1] | LOCK AS-CYLINDER | |
| 6. | 124-8105 | [1] | PLATE | |
| 7. | 130-7912 | [1] | SPRING | |
| 8. | 130-7913 | [2] | WASHER-SPECIAL | |
| 9. | 113-8277 | [1] | SCREW-PAN HEAD (8-32X12.7-MM) | |
| 10. | 130-7914 | [1] | SPACER (6.9X11X40-MM THK) | |
| 11. | 8T-3844 M | [1] | BOLT (M6X1X70-MM) | |
| 12. | 6V-7743 M | [1] | LOCKNUT (M6X1-THD) | |
| 13. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| J | REQUIRES 5P8500 KEY | |||
| M | METRIC PART | |||
#SEBP28850648
104-7011: DOOR GP-CAB
104-7011 DOOR GP-CAB -RH
S/N 1TR1284-1549; 2DR2717-3249
PART OF 104-3447 CAB GP-ENCLOSED ROPS
AN ATTACHMENT
S/N 1TR1284-1549; 2DR2717-3249
PART OF 104-3447 CAB GP-ENCLOSED ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 438C BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 159-4269 | [1] | SPRING GP-GAS | |
| 161-9044 | [1] | KIT-FITTING | ||
| 2. | 148-5355 CE | SEAL (500CM) | ||
| 3. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 4. | 8T-4171 M | [1] | BOLT (M6X1X12-MM) | |
| 5. | 7X-2497 | [1] | HANDLE-DOOR | |
| 6. | 8Y-7293 | [1] | DOOR AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 8Y-7310 | [2] | HINGE AS | ||
| 7. | 8Y-7289 Y | [1] | WINDOW GP-DOOR (RH) | |
| 8. | 8Y-7263 | [1] | GLASS (RH) | |
| 9. | 8T-4180 M | [4] | SCREW-MACHINE (M5X0.8X20-MM) | |
| 10. | 8Y-6386 | [1] | SEAL-HANDLE | |
| 11. | 148-7318 C | [1] | HANDLE AS | |
| 12. | 147-3019 C | [2] | BRACKET | |
| 13. | 8Y-7306 | [1] | COVER | |
| 14. | 131-3987 M | [4] | SCREW (M4X0.7X12-MM) | |
| 15. | 148-7310 C | [1] | LATCH AS-ROTARY | |
| 16. | 8T-4181 M | [4] | BOLT (M6X1X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP28850649
130-3492: DOOR GP-CAB
130-3492 DOOR GP-CAB -LH
S/N 1TR1284-1549; 2DR2717-3249
PART OF 104-3447 CAB GP-ENCLOSED ROPS
AN ATTACHMENT
S/N 1TR1284-1549; 2DR2717-3249
PART OF 104-3447 CAB GP-ENCLOSED ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 438C BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 159-4269 C | [1] | SPRING GP-GAS | |
| 161-9044 | [1] | KIT-FITTING | ||
| 2. | 148-5355 | SEAL (500CM) | ||
| 3. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 4. | 8T-4171 M | [1] | BOLT (M6X1X12-MM) | |
| 5. | 7X-2497 | [1] | HANDLE-DOOR | |
| 6. | 8Y-7294 | [1] | DOOR AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 8Y-7310 | [2] | HINGE AS | ||
| 122-8429 | [1] | ROD | ||
| 7. | 8Y-7291 Y | [1] | WINDOW GP-DOOR (LH) | |
| 8. | 8Y-7264 | [1] | GLASS (LH) | |
| 9. | 8T-4180 M | [4] | SCREW-MACHINE (M5X0.8X20-MM) | |
| 10. | 8Y-6386 | [1] | SEAL-HANDLE | |
| 11. | 148-7319 | [1] | HANDLE AS | |
| 12. | 147-3019 | [1] | BRACKET | |
| 13. | 8Y-7306 | [1] | COVER | |
| 14. | 131-3987 CM | [4] | SCREW (M4X0.7X12-MM) | |
| 15. | 148-7311 | [1] | LATCH AS-ROTARY | |
| 16. | 8T-4181 M | [4] | BOLT (M6X1X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
OPERATOR STATION
CONTROL GP-STEERING
Operation and Maintenance Manual
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ELECTRICAL CONTROLLERS (SHIFT HANDLE) THAT DO NOT REENGAGE THE TRANSMISSION AFTER THE NEUTRALIZER SWITCH IS RELEASED ON CERTAIN 416C, 426C, 436C, 428C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ELECTRICAL CONTROLLERS (SHIFT HANDLE) THAT DO NOT REENGAGE THE TRANSMISSION AFTER THE NEUTRALIZER SWITCH IS RELEASED ON CERTAIN 416C, 426C, 436C, 428C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ELECTRICAL CONTROLLERS (SHIFT HANDLE) THAT DO NOT REENGAGE THE TRANSMISSION AFTER THE NEUTRALIZER SWITCH IS RELEASED ON CERTAIN 416C, 426C, 436C, 428C AND 438C BACKHOE LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Transmission Control (Shift Lever) - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Transmission Control (Shift Lever) - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
CID 0668 FMI 02 Transmission Control (Shift Lever) Incorrect Signal - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
CID 0668 FMI 09 Transmission Control (Shift Lever) Abnormal Update - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Service Magazine
Caterpillar Parts SIS Catalog 438C :
Truck sale:
35.061
Caterpillar 438CAWS, baggerlader, Bau-Und Bergbauausrüstung
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
