AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

111-7814 TRANSMISSION GP-DIRECT DRIVE S/N 4ZN20488-20524 PART OF 107-3762 TRANSMISSION AR-DIRECT DRIVE AN ATTACHMENT 416C


POWER TRAIN
TRANSMISSION GP

BACKHOE LOADER 416C BACKHOE LOADER 4ZN
 416C Backhoe Loader Center Pivot, Single Tilt 4ZN16044-50156 (MACHINE) POWERED BY 3054 Engine SEBP2886 416C 4ZN   (1996)

POWER TRAIN

TRANSMISSION GP
142-4437 TRANSMISSION AR-POWER SHIFT
TRANSMISSION GP-DIRECT DRIVE
111-7814 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7814 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7814 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7814 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7815 TRANSMISSION GP-DIRECT DRIVE
 

#SEBP28860290
 

111-7814: TRANSMISSION GP-DIRECT DRIVE

111-7814 TRANSMISSION GP-DIRECT DRIVE
S/N 4ZN20488-20524
PART OF 107-3762 TRANSMISSION AR-DIRECT DRIVE
AN ATTACHMENT
i01346253 SEBP2886
1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-5748 M [7] BOLT (M8X1.25X55-MM)  
2. 121-7396 [1] VALVE GP-RELIEF (TORQUE CONVERTER INLET)  
2A. 6V-4589 [1] SEAL-O-RING (CLUTCH PRESSURE)  
2B. 8L-2746 [1] SEAL-O-RING  
3. 121-7405 [1] VALVE GP-RELIEF  
3A. 7X-4744 [1] SEAL-O-RING  
3B. 6V-9178 [1] SEAL-O-RING  
3C. 106-9586 [1] SEAL-O-RING  
4. 122-3652 [2] PLUG  
5. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
6. 175-0054 [1] SEAL-O-RING  
7. 174-9711 [1] GASKET  
8. 120-9590 [1] CASE AS  
9. 156-9275 [1] CASE-REAR TRANSMISSION  
10. 9S-4191 [11] PLUG (9/16-18-THD)  
11. 3J-1907 [12] SEAL-O-RING  
12. 6V-8335 M [14] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
13. 7T-3022 [2] SLEEVE  
14. 123-8906 [3] CUP-TAPERED ROLLER  
15. 123-8905 [3] CONE-BEARING  
16. 9U-8886 [4] RING-SEAL  
17. 7T-3021 [2] SYNCHRONIZER GP  
18. 121-0490 [1] RING-RETAINING  
19. 121-0630 [1] RETAINER  
20. 121-0697 [1] WASHER-THRUST (45X65X5-MM THK)  
21. 172-6050 [2] BEARING-SPECIAL  
22. 095-0927 [1] RING-RETAINING  
23. 121-0714 [1] PISTON  
24. 178-9566 [1] SPRING-PISTON  
25. 121-0885 [1] RETAINER  
26. 6T-9196 [1] SEAL  
27. 6T-9194 [9] PLATE  
28. 6Y-7957 [8] DISC-FRICTION  
29. 121-0900 [1] SHAFT AS-OUTPUT (FRONT)  
30. 121-0904 [1] GEAR AS (36-TEETH)  
31. 123-8912 [2] BEARING-ROLLER  
32. 122-1877 [1] WASHER-THRUST (40X65X4-MM THK)  
33. 121-1223 [1] GEAR (35-TEETH)  
34. 121-1251 [1] GEAR (28-TEETH)  
35. 117-4650 [1] GEAR (37-TEETH)  
36. 6T-9160 [1] GEAR (43-TEETH)  
37. 121-1253 [1] GEAR (37-TEETH)  
38. 6V-8500 [2] BEARING  
39. 7T-3017 [1] SPACER (52.5X59X9.6-MM THK)  
40. 7T-3018 [1] SLEEVE  
41. 6Y-2326 [1] RING  
42. 122-1878 [1] RING-SEAL  
43. 122-1879 [1] SPACER (58X67.5X2-MM THK)  
44. 104-3288 B SHIM (0.05-MM THK)  
45. 121-2059 B SHIM (0.08-MM THK)  
46. 121-2060 B SHIM (0.18-MM THK)  
47. 121-2061 B SHIM (0.6-MM THK)  
48. 121-2062 [1] WASHER-THRUST (35X55X4-MM THK)  
49. 7T-3034 [1] SPACER (56.9X64.5X1.98-MM)  
50. 6T-9144 B SHIM (0.051-MM THK)  
51. 6T-9147 B SHIM (0.076-MM THK)  
52. 6T-9146 B SHIM (0.127-MM THK)  
53. 6T-9145 B SHIM (0.178-MM THK)  
54. 6T-9143 B SHIM (0.381-MM THK)  
55. 6T-9142 B SHIM (0.508-MM THK)  
56. 005-0469 [2] CUP-BEARING  
57. 005-0471 [2] CONE-BEARING  
58. 121-2063 [1] SHAFT-OUTPUT (REAR)  
59. 123-8910 [1] CUP-TAPERED ROLLER  
60. 123-8909 [1] CONE-BEARING  
61. 7T-2646 B [2] SPACER (66X79.5X2.02-MM THK)  
62. 6T-9166 B [2] SHIM (0.051-MM THK)  
63. 6T-9165 B [2] SHIM (0.076-MM THK)  
64. 6T-9164 B [2] SHIM (0.178-MM THK)  
65. 6T-9163 B [2] SHIM (0.599-MM THK)  
66. 7T-3051 [1] PLUG  
67. 8T-1580 [1] CUP-BEARING  
68. 8T-1581 [1] BEARING-TAPERED ROLLER  
69. 6Y-2737 [1] CUP-BEARING  
70. 6Y-2736 [1] CONE-BEARING  
71. 121-2500 [3] WASHER-THRUST (50X70X4-MM THK)  
72. 121-2511 [1] SHAFT  
73. 121-2537 [1] SHAFT-REVERSE  
74. 121-2545 [1] SHAFT AS-INPUT  
  123-0714 [1] BEARING  
  123-2920 [3] PLUG  
75. 121-2603 [1] GEAR (24-TEETH)  
76. 121-2604 [1] GEAR (27-TEETH)  
77. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
78. 122-1882 [2] PLATE-END  
79. 122-1881 [12] PLATE-CLUTCH  
80. 122-1880 [12] DISC  
81. 6V-8757 [3] RING-RETAINING  
82. 121-2801 [2] RETAINER  
83. 121-2802 [2] SPRING  
84. 121-2803 [2] PISTON  
85. 122-1875 [2] SEAL  
86. 122-1874 [2] SEAL-O-RING  
87. 122-6783 [2] RING-SEAL  
88. 6V-4368 [2] SEAL-O-RING  
89. 121-9875 M [4] BOLT (M10X1.5X55-MM)  
90. 122-6787 [2] YOKE AS  
    (EACH INCLUDES)
  [1] GUARD  
91. 122-1883 [1] SPACER (38X45X5-MM THK)  
92. 122-1885 [2] SPACER (51X55X4-MM THK)  
93. 123-8913 [4] BEARING-ROLLER  
94. 172-5317 [2] BEARING-SPECIAL  
95. 122-3649 [2] RING-RETAINING  
96. 7T-3195 [2] WASHER (12.3X47X6.35-MM THK)  
97. 123-2920 [1] PLUG  
98. 6V-8097 M [2] BOLT (M12X1.75X30-MM)  
99. 5P-8066 [2] SEAL-O-RING  
100. 122-1884 [1] SPACER (45X49X8-MM THK)  
101. 121-7385 [1] PUMP GP-TRANSMISSION  
102. 7X-4741 [1] SEAL  
103. 122-1886 [1] RING-SEAL  
104. 014-5645 [3] BALL  
105. 6Y-1341 [2] SPRING  
106. 121-7403 [1] FORK-SHIFT  
107. 121-7389 [1] ROD AS-GEARSHIFT (FIRST, SECOND)  
108. 121-7390 [1] ROD AS-GEARSHIFT  
109. 7T-3249 [2] SCREW (3/8-24X0.75-IN)  
110. 123-8907 [2] CONE-BEARING  
111. 123-8908 [2] CUP-TAPERED ROLLER  
112. 7T-3109 [1] PIN  
113. 121-7404 [1] FORK-SHIFT  
114. 127-3017 [1] SEAT AS  
115. 6V-5100 [1] SEAL-O-RING  
116. 3S-2093 [1] STRAP-CABLE  
117. 1U-8846 B [1] SEALANT-GASKET  
118. 123-2919 M [2] NUT (M11X1-THD)  
119. 122-1876 [1] TUBE  
120. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
121. 123-2918 [2] SLEEVE  
122. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
123. 121-7399 B SHIM (0.05-MM THK)  
124. 121-7400 B SHIM (0.08-MM THK)  
125. 121-7401 B SHIM (0.18-MM THK)  
126. 121-7402 B SHIM (0.6-MM THK)  
127. 121-1252 [1] HOUSING  
128. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
129. 121-4036 Y [1] VALVE GP-SOLENOID (ALL WHEEL DRIVE)  
130. 142-1468 Y [1] VALVE GP-SOLENOID (DIRECTION)  
131. 1R-0772 [1] FILTER ELEMENT AS-OIL (HYDRAULIC)  
132. 3G-6927 [1] ADAPTER  
133. 7T-3253 [2] DOWEL  
134. 8T-2193 [2] SEAL-LIP TYPE  
135. 7T-2651 [1] STRAINER-SUCTION  
136. 4F-7952 [1] SEAL-O-RING  
137. 9W-5460 [1] RING  
138. 106-9861 [1] PLATE AS-COVER  
139. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
140. 7T-3251 [1] BREATHER (TRANSMISSION)  
141. 121-7391 [1] LEVER  
142. 120-9762 [4] SEAL-O-RING  
143. 7T-3111 [1] COVER  
144. 6K-0806 [1] STRAP-CABLE  
145. 1H-9721 [1] PLUG-EXPANSION  
146. 122-6785 [1] PLUG AS  
147. 7T-3119 [1] HOUSING  
148. 6Y-2035 [1] GASKET  
149. 6V-7731 M [2] BOLT (M10X1.5X70-MM)  
150. 121-0709 [1] SPRING  
151. 3D-2824 [1] SEAL-O-RING  
152. 6B-8208 [1] BALL  
153. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28860291
 

111-7814: TRANSMISSION GP-DIRECT DRIVE

111-7814 TRANSMISSION GP-DIRECT DRIVE
S/N 4ZN20525-50156
PART OF 107-3762 TRANSMISSION AR-DIRECT DRIVE
Type 1
AN ATTACHMENT
i01346283 SEBP2886
1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-5748 M [7] BOLT (M8X1.25X55-MM)  
2. 121-7396 [1] VALVE GP-RELIEF (TORQUE CONVERTER INLET)  
2A. 6V-4589 [1] SEAL-O-RING  
2B. 8L-2746 [1] SEAL-O-RING  
3. 121-7405 [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
3A. 7X-4744 [1] SEAL-O-RING  
3B. 6V-9178 [1] SEAL-O-RING  
3C. 106-9586 [1] SEAL-O-RING  
4. 122-3652 [2] PLUG  
5. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
6. 175-0054 [1] SEAL-O-RING  
7. 174-9711 [1] GASKET  
8. 120-9590 [1] CASE AS  
9. 156-9275 [1] CASE-REAR TRANSMISSION  
10. 9S-4191 [11] PLUG (9/16-18-THD)  
11. 3J-1907 [12] SEAL-O-RING  
12. 6V-8335 M [14] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
13. 7T-3022 [2] SLEEVE  
14. 123-8906 [3] CUP-TAPERED ROLLER  
15. 123-8905 [3] CONE-BEARING  
16. 9U-8886 [4] RING-SEAL  
17. 7T-3021 [2] SYNCHRONIZER GP  
18. 121-0490 [1] RING-RETAINING  
19. 121-0630 [1] RETAINER  
20. 121-0697 [1] WASHER-THRUST (45X65X5-MM THK)  
21. 172-6050 [2] BEARING-SPECIAL  
22. 095-0927 [1] RING-RETAINING  
23. 121-0714 [1] PISTON  
24. 178-9566 [1] SPRING-PISTON  
25. 121-0885 [1] RETAINER  
26. 6T-9196 [1] SEAL  
27. 6T-9194 [9] PLATE  
28. 6Y-7957 [8] DISC-FRICTION  
29. 121-0900 [1] SHAFT AS-OUTPUT (FRONT)  
30. 121-0904 [1] GEAR AS (36-TEETH)  
31. 123-8912 [2] BEARING-ROLLER  
32. 122-1877 [1] WASHER-THRUST (40X65X4-MM THK)  
33. 121-1223 [1] GEAR (35-TEETH)  
34. 121-1251 [1] GEAR (28-TEETH)  
35. 117-4650 [1] GEAR (37-TEETH)  
36. 6T-9160 [1] GEAR (43-TEETH)  
37. 121-1253 [1] GEAR (37-TEETH)  
38. 6V-8500 [2] BEARING  
39. 7T-3017 [1] SPACER (52.5X59X9.6-MM THK)  
40. 7T-3018 [1] SLEEVE  
41. 6Y-2326 [1] RING  
42. 122-1878 [1] RING-SEAL  
43. 122-1879 [1] SPACER (58X67.5X2-MM THK)  
44. 104-3288 B SHIM (0.05-MM THK)  
45. 121-2059 B SHIM (0.08-MM THK)  
46. 121-2060 B SHIM (0.18-MM THK)  
47. 121-2061 B SHIM (0.6-MM THK)  
48. 121-2062 [1] WASHER-THRUST (35X55X4-MM THK)  
49. 7T-3034 [1] SPACER (56.9X64.5X1.98-MM)  
50. 6T-9144 B SHIM (0.051-MM THK)  
51. 6T-9147 B SHIM (0.076-MM THK)  
52. 6T-9146 B SHIM (0.127-MM THK)  
53. 6T-9145 B SHIM (0.178-MM THK)  
54. 6T-9143 B SHIM (0.381-MM THK)  
55. 6T-9142 B SHIM (0.508-MM THK)  
56. 005-0469 [2] CUP-BEARING  
57. 005-0471 [2] CONE-BEARING  
58. 121-2063 [1] SHAFT-OUTPUT (REAR)  
59. 123-8910 [1] CUP-TAPERED ROLLER  
60. 123-8909 [1] CONE-BEARING  
61. 7T-2646 B [2] SPACER (66X79.5X2.02-MM THK)  
62. 6T-9166 B [2] SHIM (0.051-MM THK)  
63. 6T-9165 B [2] SHIM (0.076-MM THK)  
64. 6T-9164 B [2] SHIM (0.178-MM THK)  
65. 6T-9163 B [2] SHIM (0.599-MM THK)  
66. 7T-3051 [1] PLUG  
67. 8T-1580 [1] CUP-BEARING  
68. 8T-1581 [1] BEARING-TAPERED ROLLER  
69. 6Y-2737 [1] CUP-BEARING  
70. 6Y-2736 [1] CONE-BEARING  
71. 121-2500 [3] WASHER-THRUST (50X70X4-MM THK)  
72. 121-2511 [1] SHAFT  
73. 121-2537 [1] SHAFT-REVERSE  
74. 121-2545 [1] SHAFT AS-INPUT  
  123-0714 [1] BEARING  
  123-2920 [3] PLUG  
75. 121-2603 [1] GEAR (24-TEETH)  
76. 121-2604 [1] GEAR (27-TEETH)  
77. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
78. 122-1882 [2] PLATE-END  
79. 122-1881 [12] PLATE-CLUTCH  
80. 122-1880 [12] DISC  
81. 6V-8757 [3] RING-RETAINING  
82. 121-2801 [2] RETAINER  
83. 121-2802 [2] SPRING  
84. 121-2803 [2] PISTON  
85. 122-1875 [2] SEAL  
86. 122-1874 [2] SEAL-O-RING  
87. 122-6783 [2] RING-SEAL  
88. 6V-4368 [2] SEAL-O-RING  
89. 121-9875 M [4] BOLT (M10X1.5X55-MM)  
90. 122-6787 [2] YOKE AS  
    (EACH INCLUDES)
  [1] GUARD  
91. 122-1883 [1] SPACER (38X45X5-MM THK)  
92. 122-1885 [2] SPACER (51X55X4-MM THK)  
93. 123-8913 [4] BEARING-ROLLER  
94. 172-5317 [2] BEARING-SPECIAL  
95. 122-3649 [2] RING-RETAINING  
96. 7T-3195 [2] WASHER (12.3X47X6.35-MM THK)  
97. 123-2920 [1] PLUG  
98. 6V-8097 M [2] BOLT (M12X1.75X30-MM)  
99. 5P-8066 [2] SEAL-O-RING  
100. 122-1884 [1] SPACER (45X49X8-MM THK)  
101. 121-7385 [1] PUMP GP-TRANSMISSION  
102. 7X-4741 [1] SEAL  
103. 122-1886 [1] RING-SEAL  
104. 014-5645 [3] BALL  
105. 6Y-1341 [2] SPRING  
106. 121-7403 [1] FORK-SHIFT  
107. 121-7389 [1] ROD AS-GEARSHIFT (FIRST, SECOND)  
108. 121-7390 [1] ROD AS-GEARSHIFT  
109. 7T-3249 [2] SCREW (3/8-24X0.75-IN)  
110. 123-8907 [2] CONE-BEARING  
111. 123-8908 [2] CUP-TAPERED ROLLER  
112. 7T-3109 [1] PIN  
113. 121-7404 [1] FORK-SHIFT  
114. 127-3017 [1] SEAT AS  
115. 6V-5100 [1] SEAL-O-RING  
116. 3S-2093 [1] STRAP-CABLE  
117. 1U-8846 B [1] SEALANT-GASKET  
118. 123-2919 M [2] NUT (M11X1-THD)  
119. 122-1876 [1] TUBE  
120. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
121. 123-2918 [2] SLEEVE  
122. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
123. 121-7399 B SHIM (0.05-MM THK)  
124. 121-7400 B SHIM (0.08-MM THK)  
125. 121-7401 B SHIM (0.18-MM THK)  
126. 121-7402 B SHIM (0.6-MM THK)  
127. 121-1252 [1] HOUSING  
128. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
129. 121-4036 Y [1] VALVE GP-SOLENOID (ALL WHEEL DRIVE)  
130. 142-1468 Y [1] VALVE GP-SOLENOID (DIRECTION)  
131. 119-4740 [1] FILTER-OIL (STANDARD EFFICIENCY)  
132. 3G-6927 [1] ADAPTER  
133. 7T-3253 [2] DOWEL  
134. 8T-2193 [2] SEAL-LIP TYPE  
135. 7T-2651 [1] STRAINER-SUCTION  
136. 4F-7952 [1] SEAL-O-RING  
137. 9W-5460 [1] RING  
138. 106-9861 [1] PLATE AS-COVER  
139. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
140. 7T-3251 [1] BREATHER (TRANSMISSION)  
141. 121-7391 [1] LEVER  
142. 120-9762 [4] SEAL-O-RING  
143. 7T-3111 [1] COVER  
144. 6K-0806 [1] STRAP-CABLE  
145. 1H-9721 [1] PLUG-EXPANSION  
146. 122-6785 [1] PLUG AS  
147. 7T-3119 [1] HOUSING  
148. 6Y-2035 [1] GASKET  
149. 6V-7731 M [2] BOLT (M10X1.5X70-MM)  
150. 121-0709 [1] SPRING  
151. 3D-2824 [1] SEAL-O-RING  
152. 6B-8208 [1] BALL  
153. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28860292
 

111-7814: TRANSMISSION GP-DIRECT DRIVE

111-7814 TRANSMISSION GP-DIRECT DRIVE
S/N 4ZN20525-50156
PART OF 107-3762 TRANSMISSION AR-DIRECT DRIVE
Type 2
AN ATTACHMENT
i01346297 SEBP2886
1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-5748 M [7] BOLT (M8X1.25X55-MM)  
2. 121-7396 [1] VALVE GP-RELIEF (TORQUE CONVERTER INLET)  
2A. 6V-4589 [1] SEAL-O-RING  
2B. 8L-2746 [1] SEAL-O-RING  
3. 121-7405 [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
3A. 7X-4744 [1] SEAL-O-RING  
3B. 6V-9178 [1] SEAL-O-RING  
3C. 106-9586 [1] SEAL-O-RING  
4. 122-3652 [2] PLUG  
5. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
6. 175-0054 [1] SEAL-O-RING  
7. 174-9711 [1] GASKET  
8. 120-9590 [1] CASE AS  
9. 156-9275 [1] CASE-REAR TRANSMISSION  
10. 9S-4191 [11] PLUG (9/16-18-THD)  
11. 3J-1907 [12] SEAL-O-RING  
12. 6V-8335 M [14] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
13. 7T-3022 [2] SLEEVE  
14. 123-8906 [3] CUP-TAPERED ROLLER  
15. 123-8905 [3] CONE-BEARING  
16. 9U-8886 [4] RING-SEAL  
17. 7T-3021 [2] SYNCHRONIZER GP  
18. 161-3249 [1] RING-RETAINING  
19. 121-0630 [1] RETAINER  
20. 121-0697 [1] WASHER-THRUST (45X65X5-MM THK)  
21. 172-6050 [2] BEARING-SPECIAL  
22. 095-0927 [1] RING-RETAINING  
23. 121-0714 [1] PISTON  
24. 178-9566 [1] SPRING-PISTON  
25. 121-0885 [1] RETAINER  
26. 6T-9196 [1] SEAL  
27. 6T-9194 [9] PLATE  
28. 6Y-7957 [8] DISC-FRICTION  
29. 190-9767 [1] SHAFT AS (OUTPUT)  
30. 121-0904 [1] GEAR AS (36-TEETH)  
31. 123-8912 [2] BEARING-ROLLER  
32. 122-1877 [1] WASHER-THRUST (40X65X4-MM THK)  
33. 211-6758 [1] GEAR (19-TEETH)  
34. 121-1251 [1] GEAR (28-TEETH)  
35. 117-4650 [1] GEAR (37-TEETH)  
36. 6T-9160 [1] GEAR (43-TEETH)  
37. 121-1253 [1] GEAR (37-TEETH)  
38. 6V-8500 [2] BEARING  
39. 7T-3017 [1] SPACER (52.5X59X9.6-MM THK)  
40. 7T-3018 [1] SLEEVE  
41. 6Y-2326 [1] RING  
42. 122-1878 [1] RING-SEAL  
43. 122-1879 [1] SPACER (58X67.5X2-MM THK)  
44. 104-3288 B [1] SHIM (0.05-MM THK)  
45. 121-2059 B [1] SHIM (0.08-MM THK)  
46. 121-2060 B [1] SHIM (0.18-MM THK)  
47. 121-2061 B [1] SHIM (0.6-MM THK)  
48. 121-2062 [1] WASHER-THRUST (35X55X4-MM THK)  
49. 7T-3034 [1] SPACER (56.9X64.5X1.98-MM)  
50. 6T-9144 B [1] SHIM (0.051-MM THK)  
51. 6T-9147 B [1] SHIM (0.076-MM THK)  
52. 6T-9146 B [1] SHIM (0.127-MM THK)  
53. 6T-9145 B [1] SHIM (0.178-MM THK)  
54. 6T-9143 B [1] SHIM (0.381-MM THK)  
55. 6T-9142 B [1] SHIM (0.508-MM THK)  
56. 005-0469 [2] CUP-BEARING  
57. 005-0471 [2] CONE-BEARING  
58. 211-6759 [1] SHAFT (OUTPUT)  
59. 123-8910 [1] CUP-TAPERED ROLLER  
60. 123-8909 [1] CONE-BEARING  
61. 7T-2646 B [2] SPACER (66X79.5X2.02-MM THK)  
62. 6T-9166 B [2] SHIM (0.051-MM THK)  
63. 6T-9165 B [2] SHIM (0.076-MM THK)  
64. 6T-9164 B [2] SHIM (0.178-MM THK)  
65. 6T-9163 B [2] SHIM (0.599-MM THK)  
66. 7T-3051 [1] PLUG  
67. 8T-1580 [1] CUP-BEARING  
68. 8T-1581 [1] BEARING-TAPERED ROLLER  
69. 6Y-2737 [1] CUP-BEARING  
70. 6Y-2736 [1] CONE-BEARING  
71. 121-2500 [3] WASHER-THRUST (50X70X4-MM THK)  
72. 121-2511 [1] SHAFT  
73. 121-2537 [1] SHAFT-REVERSE  
74. 121-2545 [1] SHAFT AS-INPUT  
  123-0714 [1] BEARING  
  123-2920 [3] PLUG  
75. 121-2603 [1] GEAR (24-TEETH)  
76. 121-2604 [1] GEAR (27-TEETH)  
77. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
78. 122-1882 [2] PLATE-END  
79. 122-1881 [12] PLATE-CLUTCH  
80. 122-1880 [12] DISC  
81. 6V-8757 [3] RING-RETAINING  
82. 121-2801 [2] RETAINER  
83. 121-2802 [2] SPRING  
84. 121-2803 [2] PISTON  
85. 122-1875 [2] SEAL  
86. 122-1874 [2] SEAL-O-RING  
87. 122-6783 [2] RING-SEAL  
88. 6V-4368 [2] SEAL-O-RING  
89. 121-9875 M [4] BOLT (M10X1.5X55-MM)  
90. 122-6787 [2] YOKE AS  
    (EACH INCLUDES)
  [1] GUARD  
91. 122-1883 [1] SPACER (38X45X5-MM THK)  
92. 122-1885 [2] SPACER (51X55X4-MM THK)  
93. 123-8913 [4] BEARING-ROLLER  
94. 172-5317 [2] BEARING-SPECIAL  
95. 122-3649 [2] RING-RETAINING  
96. 7T-3195 [2] WASHER (12.3X47X6.35-MM THK)  
97. 123-2920 [1] PLUG  
98. 6V-8097 M [2] BOLT (M12X1.75X30-MM)  
99. 5P-8066 [2] SEAL-O-RING  
100. 122-1884 [1] SPACER (45X49X8-MM THK)  
101. 121-7385 [1] PUMP GP-TRANSMISSION  
102. 7X-4741 [1] SEAL  
103. 122-1886 [1] RING-SEAL  
104. 014-5645 [3] BALL  
105. 6Y-1341 [2] SPRING  
106. 121-7403 [1] FORK-SHIFT  
107. 121-7389 [1] ROD AS-GEARSHIFT (FIRST, SECOND)  
108. 121-7390 [1] ROD AS-GEARSHIFT  
109. 7T-3249 [2] SCREW (3/8-24X0.75-IN)  
110. 123-8907 [2] CONE-BEARING  
111. 123-8908 [2] CUP-TAPERED ROLLER  
112. 7T-3109 [1] PIN  
113. 121-7404 [1] FORK-SHIFT  
114. 127-3017 [1] SEAT AS  
115. 6V-5100 [1] SEAL-O-RING  
116. 3S-2093 [1] STRAP-CABLE  
117. 1U-8846 B [1] SEALANT-GASKET  
118. 123-2919 M [2] NUT (M11X1-THD)  
119. 122-1876 [1] TUBE  
120. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
121. 123-2918 [2] SLEEVE  
122. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
123. 121-7399 B [1] SHIM (0.05-MM THK)  
124. 121-7400 B [1] SHIM (0.08-MM THK)  
125. 121-7401 B [1] SHIM (0.18-MM THK)  
126. 121-7402 B [1] SHIM (0.6-MM THK)  
127. 121-1252 [1] HOUSING  
128. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
129. 121-4036 Y [1] VALVE GP-SOLENOID (ALL WHEEL DRIVE)  
130. 142-1468 Y [1] VALVE GP-SOLENOID (DIRECTION)  
131. 119-4740 [1] FILTER-OIL (STANDARD EFFICIENCY)  
132. 3G-6927 [1] ADAPTER  
133. 7T-3253 [2] DOWEL  
134. 8T-2193 [2] SEAL-LIP TYPE  
135. 7T-2651 [1] STRAINER-SUCTION  
136. 4F-7952 [1] SEAL-O-RING  
137. 9W-5460 [1] RING  
138. 106-9861 [1] PLATE AS-COVER  
139. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
140. 7T-3251 [1] BREATHER (TRANSMISSION)  
141. 121-7391 [1] LEVER  
142. 120-9762 [4] SEAL-O-RING  
143. 7T-3111 [1] COVER  
144. 6K-0806 [1] STRAP-CABLE  
145. 1H-9721 [1] PLUG-EXPANSION  
146. 122-6785 [1] PLUG AS  
147. 7T-3119 [1] HOUSING  
148. 6Y-2035 [1] GASKET  
149. 6V-7731 M [2] BOLT (M10X1.5X70-MM)  
150. 121-0709 [1] SPRING  
151. 3D-2824 [1] SEAL-O-RING  
152. 6B-8208 [1] BALL  
153. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28860293
 

111-7815: TRANSMISSION GP-DIRECT DRIVE

111-7815 TRANSMISSION GP-DIRECT DRIVE
S/N 4ZN16044-20487
PART OF 107-3761 TRANSMISSION AR-DIRECT DRIVE
AN ATTACHMENT
i00200862 SEBP2886
1117815 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117815 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117815 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
8. 124-6082 [1] CASE AS-TRANSMISSION  
9. 156-9276 [1] CASE-TRANSMISSION  
10. 9S-4191 [11] PLUG (9/16-18-THD)  
11. 3J-1907 [12] SEAL-O-RING  
12. 6V-8335 M [17] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
13. 7T-3022 [2] SLEEVE  
14. 123-8906 [1] CUP-TAPERED ROLLER  
15. 123-8905 [1] CONE-BEARING  
16. 9U-8886 [4] RING-SEAL  
17. 7T-3021 [2] SYNCHRONIZER GP  
18. 121-1223 [1] GEAR (35-TEETH)  
19. 121-1251 [1] GEAR (28-TEETH)  
20. 117-4650 [1] GEAR (37-TEETH)  
21. 6T-9160 [1] GEAR (43-TEETH)  
22. 6V-8500 [2] BEARING  
23. 7T-3017 [1] SPACER (52.5X59X9.6-MM THK)  
24. 7T-3018 [1] SLEEVE  
25. 6Y-2326 [1] RING  
26. 121-2062 [1] WASHER-THRUST (35X55X4-MM THK)  
27. 7T-3034 B [1] SPACER (56.9X64.5X1.98-MM)  
28. 6T-9144 B [1] SHIM (0.051-MM THK)  
29. 6T-9147 B [1] SHIM (0.076-MM THK)  
30. 6T-9146 B [1] SHIM (0.127-MM THK)  
31. 6T-9145 B [1] SHIM (0.178-MM THK)  
32. 6T-9143 B [1] SHIM (0.381-MM THK)  
33. 6T-9142 B [1] SHIM (0.508-MM THK)  
34. 005-0469 [2] CUP-BEARING  
35. 005-0471 [2] CONE-BEARING  
36. 121-2063 [1] SHAFT-OUTPUT (REAR)  
37. 123-8910 [1] CUP-TAPERED ROLLER  
38. 123-8909 [1] CONE-BEARING  
39. 7T-2646 B [2] SPACER (66X79.5X2.02-MM THK)  
40. 6T-9166 B [2] SHIM (0.051-MM THK)  
41. 6T-9165 B [2] SHIM (0.076-MM THK)  
42. 6T-9164 B [2] SHIM (0.178-MM THK)  
43. 6T-9163 [2] SHIM (0.599-MM THK)  
44. 7T-3051 [1] PLUG  
45. 8T-1580 [1] CUP-BEARING  
46. 8T-1581 [1] BEARING-TAPERED ROLLER  
47. 6Y-2737 [1] CUP-BEARING  
48. 6Y-2736 [1] CONE-BEARING  
49. 121-2500 [3] WASHER-THRUST (50X70X4-MM THK)  
50. 121-2511 [1] SHAFT  
51. 121-2537 [1] SHAFT-REVERSE  
52. 121-2545 [1] SHAFT AS-INPUT  
  123-0714 [1] BEARING  
  123-2920 [3] PLUG  
53. 121-2603 [1] GEAR (24-TEETH)  
54. 121-2604 [1] GEAR (27-TEETH)  
55. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
56. 122-1882 [2] PLATE-END  
57. 122-1881 [12] PLATE-CLUTCH  
58. 122-1880 [12] DISC  
59. 6V-8757 [3] RING-RETAINING  
60. 121-2801 [2] RETAINER  
61. 121-2802 [2] SPRING  
62. 121-2803 [2] PISTON  
63. 122-1875 [2] SEAL  
64. 122-1874 [2] SEAL-O-RING  
65. 122-6783 [2] RING-SEAL  
66. 6V-4368 [2] SEAL-O-RING  
67. 122-6787 [1] YOKE AS  
  [1] GUARD  
68. 122-1885 [2] SPACER (51X55X4-MM THK)  
69. 123-8913 [4] BEARING-ROLLER  
70. 172-5317 [2] BEARING-SPECIAL  
71. 7T-3195 [1] WASHER (12.3X47X6.35-MM THK)  
72. 6V-8097 M [1] BOLT (M12X1.75X30-MM)  
73. 5P-8066 [1] SEAL-O-RING  
74. 121-7385 [1] PUMP GP-TRANSMISSION  
  124-6612 [1] SEAL-LIP TYPE  
75. 7X-4741 [1] SEAL  
76. 122-1886 [1] RING-SEAL  
77. 014-5645 [3] BALL  
78. 6Y-1341 [2] SPRING  
79. 121-7403 [1] FORK-SHIFT  
80. 121-7389 [1] ROD AS-GEARSHIFT (FIRST, SECOND)  
81. 121-7390 [1] ROD AS-GEARSHIFT  
82. 7T-3249 [2] SCREW (3/8-24X0.75-IN)  
83. 123-8907 [2] CONE-BEARING  
84. 123-8908 [2] CUP-TAPERED ROLLER  
85. 127-3017 [1] SEAT AS  
86. 7T-3109 [1] PIN  
87. 121-7404 [1] FORK-SHIFT  
88. 3S-2093 [1] STRAP-CABLE  
90. 6Y-1896 [1] PLUG AS-DRAIN  
91. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
92. 121-7399 B [1] SHIM (0.05-MM THK)  
93. 121-7400 B [1] SHIM (0.08-MM THK)  
94. 121-7401 B [1] SHIM (0.18-MM THK)  
95. 121-7402 B [1] SHIM (0.6-MM THK)  
96. 121-1252 [1] HOUSING  
97. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
98. 142-1468 Y [1] VALVE GP-SOLENOID (DIRECTION)  
99. 119-4740 [1] FILTER-OIL (STANDARD EFFICIENCY)  
100. 3G-6927 [1] ADAPTER  
101. 7T-3253 [2] DOWEL  
102. 8T-2193 [1] SEAL-LIP TYPE  
103. 7T-2651 [1] STRAINER-SUCTION  
104. 4F-7952 [1] SEAL-O-RING  
105. 9W-5460 [1] RING  
106. 106-9861 [1] PLATE AS-COVER  
107. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
108. 7T-3251 [1] BREATHER  
109. 121-7391 [1] LEVER  
110. 120-9762 [3] SEAL-O-RING  
111. 7T-3111 [1] COVER  
112. 6K-0806 [1] STRAP-CABLE  
113. 1H-9721 [1] PLUG-EXPANSION  
114. 122-6785 [1] PLUG AS  
115. 6Y-2936 [1] SPACER (60X72X32-MM THK)  
116. 7T-3119 [1] HOUSING  
117. 6Y-2035 [1] GASKET  
118. 6V-7731 M [2] BOLT (M10X1.5X70-MM)  
119. 121-0709 [1] SPRING  
120. 3D-2824 [1] SEAL-O-RING  
121. 6B-8208 [1] BALL  
122. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
123. 8C-5748 M [7] BOLT (M8X1.25X55-MM)  
124. 121-7396 [1] VALVE GP-RELIEF (TORQUE CONVERTER INLET)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
125. 121-7405 [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
  6V-9178 [1] SEAL-O-RING  
  7X-4744 [1] SEAL-O-RING  
  106-9586 [1] SEAL-O-RING  
126. 122-3652 [2] PLUG  
127. 122-3649 [2] RING-RETAINING  
128. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
129. 175-0054 [1] SEAL-O-RING  
130. 174-9711 [1] GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28860294
 

111-7815: TRANSMISSION GP-DIRECT DRIVE

111-7815 TRANSMISSION GP-DIRECT DRIVE
S/N 4ZN20488-20524
PART OF 107-3761 TRANSMISSION AR-DIRECT DRIVE
AN ATTACHMENT
i01346354 SEBP2886
1117815 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117815 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117815 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
8. 124-6082 [1] CASE AS-TRANSMISSION  
9. 156-9276 [1] CASE-TRANSMISSION  
10. 9S-4191 [11] PLUG (9/16-18-THD)  
11. 3J-1907 [12] SEAL-O-RING  
12. 6V-8335 M [17] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
13. 7T-3022 [2] SLEEVE  
14. 123-8906 [1] CUP-TAPERED ROLLER  
15. 123-8905 [1] CONE-BEARING  
16. 9U-8886 [4] RING-SEAL  
17. 7T-3021 [2] SYNCHRONIZER GP  
18. 121-1223 [1] GEAR (35-TEETH)  
19. 121-1251 [1] GEAR (28-TEETH)  
20. 117-4650 [1] GEAR (37-TEETH)  
21. 6T-9160 [1] GEAR (43-TEETH)  
22. 6V-8500 [2] BEARING  
23. 7T-3017 [1] SPACER (52.5X59X9.6-MM THK)  
24. 7T-3018 [1] SLEEVE  
25. 6Y-2326 [1] RING  
26. 121-2062 [1] WASHER-THRUST (35X55X4-MM THK)  
27. 7T-3034 B [1] SPACER (56.9X64.5X1.98-MM)  
28. 6T-9144 B [1] SHIM (0.051-MM THK)  
29. 6T-9147 B [1] SHIM (0.076-MM THK)  
30. 6T-9146 B [1] SHIM (0.127-MM THK)  
31. 6T-9145 B [1] SHIM (0.178-MM THK)  
32. 6T-9143 B [1] SHIM (0.381-MM THK)  
33. 6T-9142 B [1] SHIM (0.508-MM THK)  
34. 005-0469 [2] CUP-BEARING  
35. 005-0471 [2] CONE-BEARING  
36. 121-2063 [1] SHAFT-OUTPUT (REAR)  
37. 123-8910 [1] CUP-TAPERED ROLLER  
38. 123-8909 [1] CONE-BEARING  
39. 7T-2646 B [2] SPACER (66X79.5X2.02-MM THK)  
40. 6T-9166 B [2] SHIM (0.051-MM THK)  
41. 6T-9165 B [2] SHIM (0.076-MM THK)  
42. 6T-9164 B [2] SHIM (0.178-MM THK)  
43. 6T-9163 [2] SHIM (0.599-MM THK)  
44. 7T-3051 [1] PLUG  
45. 8T-1580 [1] CUP-BEARING  
46. 8T-1581 [1] BEARING-TAPERED ROLLER  
47. 6Y-2737 [1] CUP-BEARING  
48. 6Y-2736 [1] CONE-BEARING  
49. 121-2500 [3] WASHER-THRUST (50X70X4-MM THK)  
50. 121-2511 [1] SHAFT  
51. 121-2537 [1] SHAFT-REVERSE  
52. 121-2545 [1] SHAFT AS-INPUT  
  123-0714 [1] BEARING  
  123-2920 [3] PLUG  
53. 121-2603 [1] GEAR (24-TEETH)  
54. 121-2604 [1] GEAR (27-TEETH)  
55. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
56. 122-1882 [2] PLATE-END  
57. 122-1881 [12] PLATE-CLUTCH  
58. 122-1880 [12] DISC  
59. 6V-8757 [3] RING-RETAINING  
60. 121-2801 [2] RETAINER  
61. 121-2802 [2] SPRING  
62. 121-2803 [2] PISTON  
63. 122-1875 [2] SEAL  
64. 122-1874 [2] SEAL-O-RING  
65. 122-6783 [2] RING-SEAL  
66. 6V-4368 [2] SEAL-O-RING  
67. 122-6787 [1] YOKE AS  
  [1] GUARD  
68. 122-1885 [2] SPACER (51X55X4-MM THK)  
69. 123-8913 [4] BEARING-ROLLER  
70. 172-5317 [2] BEARING-SPECIAL  
71. 7T-3195 [1] WASHER (12.3X47X6.35-MM THK)  
72. 6V-8097 M [1] BOLT (M12X1.75X30-MM)  
73. 5P-8066 [1] SEAL-O-RING  
74. 121-7385 [1] PUMP GP-TRANSMISSION  
  124-6612 [1] SEAL-LIP TYPE  
75. 7X-4741 [1] SEAL  
76. 122-1886 [1] RING-SEAL  
77. 014-5645 [3] BALL  
78. 6Y-1341 [2] SPRING  
79. 121-7403 [1] FORK-SHIFT  
80. 121-7389 [1] ROD AS-GEARSHIFT (FIRST, SECOND)  
81. 121-7390 [1] ROD AS-GEARSHIFT  
82. 7T-3249 [2] SCREW (3/8-24X0.75-IN)  
83. 123-8907 [2] CONE-BEARING  
84. 123-8908 [2] CUP-TAPERED ROLLER  
85. 127-3017 [1] SEAT AS  
86. 7T-3109 [1] PIN  
87. 121-7404 [1] FORK-SHIFT  
88. 3S-2093 [1] STRAP-CABLE  
90. 6Y-1896 [1] PLUG AS-DRAIN  
91. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
92. 121-7399 B [1] SHIM (0.05-MM THK)  
93. 121-7400 B [1] SHIM (0.08-MM THK)  
94. 121-7401 B [1] SHIM (0.18-MM THK)  
95. 121-7402 B [1] SHIM (0.6-MM THK)  
96. 121-1252 [1] HOUSING  
97. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
98. 142-1468 Y [1] VALVE GP-SOLENOID (DIRECTION)  
99. 1R-0772 [1] FILTER ELEMENT AS-OIL (HYDRAULIC)  
100. 3G-6927 [1] ADAPTER  
101. 7T-3253 [2] DOWEL  
102. 8T-2193 [1] SEAL-LIP TYPE  
103. 7T-2651 [1] STRAINER-SUCTION  
104. 4F-7952 [1] SEAL-O-RING  
105. 9W-5460 [1] RING  
106. 106-9861 [1] PLATE AS-COVER  
107. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
108. 7T-3251 [1] BREATHER  
109. 121-7391 [1] LEVER  
110. 120-9762 [3] SEAL-O-RING  
111. 7T-3111 [1] COVER  
112. 6K-0806 [1] STRAP-CABLE  
113. 1H-9721 [1] PLUG-EXPANSION  
114. 122-6785 [1] PLUG AS  
115. 6Y-2936 [1] SPACER (60X72X32-MM THK)  
116. 7T-3119 [1] HOUSING  
117. 6Y-2035 [1] GASKET  
118. 6V-7731 M [2] BOLT (M10X1.5X70-MM)  
119. 121-0709 [1] SPRING  
120. 3D-2824 [1] SEAL-O-RING  
121. 6B-8208 [1] BALL  
122. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
123. 8C-5748 M [7] BOLT (M8X1.25X55-MM)  
124. 121-7396 [1] VALVE GP-RELIEF (TORQUE CONVERTER INLET)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
125. 121-7405 [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
  6V-9178 [1] SEAL-O-RING  
  7X-4744 [1] SEAL-O-RING  
  106-9586 [1] SEAL-O-RING  
126. 122-3652 [2] PLUG  
127. 122-3649 [2] RING-RETAINING  
128. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
129. 175-0054 [1] SEAL-O-RING  
130. 174-9711 [1] GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28860295
 

111-7815: TRANSMISSION GP-DIRECT DRIVE

111-7815 TRANSMISSION GP-DIRECT DRIVE
S/N 4ZN20525-23964
PART OF 107-3761 TRANSMISSION AR-DIRECT DRIVE
AN ATTACHMENT
i01346361 SEBP2886
1117815 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117815 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117815 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
8. 124-6082 [1] CASE AS-TRANSMISSION  
9. 156-9276 [1] CASE-TRANSMISSION  
10. 9S-4191 [11] PLUG (9/16-18-THD)  
11. 3J-1907 [12] SEAL-O-RING  
12. 6V-8335 M [17] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
13. 7T-3022 [2] SLEEVE  
14. 123-8906 [1] CUP-TAPERED ROLLER  
15. 123-8905 [1] CONE-BEARING  
16. 9U-8886 [4] RING-SEAL  
17. 7T-3021 [2] SYNCHRONIZER GP  
18. 121-1223 [1] GEAR (35-TEETH)  
19. 121-1251 [1] GEAR (28-TEETH)  
20. 117-4650 [1] GEAR (37-TEETH)  
21. 6T-9160 [1] GEAR (43-TEETH)  
22. 6V-8500 [2] BEARING  
23. 7T-3017 [1] SPACER (52.5X59X9.6-MM THK)  
24. 7T-3018 [1] SLEEVE  
25. 6Y-2326 [1] RING  
26. 121-2062 [1] WASHER-THRUST (35X55X4-MM THK)  
27. 7T-3034 B [1] SPACER (56.9X64.5X1.98-MM)  
28. 6T-9144 B [1] SHIM (0.051-MM THK)  
29. 6T-9147 B [1] SHIM (0.076-MM THK)  
30. 6T-9146 B [1] SHIM (0.127-MM THK)  
31. 6T-9145 B [1] SHIM (0.178-MM THK)  
32. 6T-9143 B [1] SHIM (0.381-MM THK)  
33. 6T-9142 B [1] SHIM (0.508-MM THK)  
34. 005-0469 [2] CUP-BEARING  
35. 005-0471 [2] CONE-BEARING  
36. 121-2063 [1] SHAFT-OUTPUT (REAR)  
37. 123-8910 [1] CUP-TAPERED ROLLER  
38. 123-8909 [1] CONE-BEARING  
39. 7T-2646 B [2] SPACER (66X79.5X2.02-MM THK)  
40. 6T-9166 B [2] SHIM (0.051-MM THK)  
41. 6T-9165 B [2] SHIM (0.076-MM THK)  
42. 6T-9164 B [2] SHIM (0.178-MM THK)  
43. 6T-9163 [2] SHIM (0.599-MM THK)  
44. 7T-3051 [1] PLUG  
45. 8T-1580 [1] CUP-BEARING  
46. 8T-1581 [1] BEARING-TAPERED ROLLER  
47. 6Y-2737 [1] CUP-BEARING  
48. 6Y-2736 [1] CONE-BEARING  
49. 121-2500 [3] WASHER-THRUST (50X70X4-MM THK)  
50. 121-2511 [1] SHAFT  
51. 121-2537 [1] SHAFT-REVERSE  
52. 121-2545 [1] SHAFT AS-INPUT  
  123-0714 [1] BEARING  
  123-2920 [3] PLUG  
53. 121-2603 [1] GEAR (24-TEETH)  
54. 121-2604 [1] GEAR (27-TEETH)  
55. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
56. 122-1882 [2] PLATE-END  
57. 122-1881 [12] PLATE-CLUTCH  
58. 122-1880 [12] DISC  
59. 6V-8757 [3] RING-RETAINING  
60. 121-2801 [2] RETAINER  
61. 121-2802 [2] SPRING  
62. 121-2803 [2] PISTON  
63. 122-1875 [2] SEAL  
64. 122-1874 [2] SEAL-O-RING  
65. 122-6783 [2] RING-SEAL  
66. 6V-4368 [2] SEAL-O-RING  
67. 122-6787 [1] YOKE AS  
  [1] GUARD  
68. 122-1885 [2] SPACER (51X55X4-MM THK)  
69. 123-8913 [4] BEARING-ROLLER  
70. 172-5317 [2] BEARING-SPECIAL  
71. 7T-3195 [1] WASHER (12.3X47X6.35-MM THK)  
72. 6V-8097 M [1] BOLT (M12X1.75X30-MM)  
73. 5P-8066 [1] SEAL-O-RING  
74. 121-7385 [1] PUMP GP-TRANSMISSION  
  124-6612 [1] SEAL-LIP TYPE  
75. 7X-4741 [1] SEAL  
76. 122-1886 [1] RING-SEAL  
77. 014-5645 [3] BALL  
78. 6Y-1341 [2] SPRING  
79. 121-7403 [1] FORK-SHIFT  
80. 121-7389 [1] ROD AS-GEARSHIFT (FIRST, SECOND)  
81. 121-7390 [1] ROD AS-GEARSHIFT  
82. 7T-3249 [2] SCREW (3/8-24X0.75-IN)  
83. 123-8907 [2] CONE-BEARING  
84. 123-8908 [2] CUP-TAPERED ROLLER  
85. 127-3017 [1] SEAT AS  
86. 7T-3109 [1] PIN  
87. 121-7404 [1] FORK-SHIFT  
88. 3S-2093 [1] STRAP-CABLE  
90. 6Y-1896 [1] PLUG AS-DRAIN  
91. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
92. 121-7399 B [1] SHIM (0.05-MM THK)  
93. 121-7400 B [1] SHIM (0.08-MM THK)  
94. 121-7401 B [1] SHIM (0.18-MM THK)  
95. 121-7402 B [1] SHIM (0.6-MM THK)  
96. 121-1252 [1] HOUSING  
97. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
98. 142-1468 Y [1] VALVE GP-SOLENOID (DIRECTION)  
99. 119-4740 [1] FILTER-OIL (STANDARD EFFICIENCY)  
100. 3G-6927 [1] ADAPTER  
101. 7T-3253 [2] DOWEL  
102. 8T-2193 [1] SEAL-LIP TYPE  
103. 7T-2651 [1] STRAINER-SUCTION  
104. 4F-7952 [1] SEAL-O-RING  
105. 9W-5460 [1] RING  
106. 106-9861 [1] PLATE AS-COVER  
107. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
108. 7T-3251 [1] BREATHER  
109. 121-7391 [1] LEVER  
110. 120-9762 [3] SEAL-O-RING  
111. 7T-3111 [1] COVER  
112. 6K-0806 [1] STRAP-CABLE  
113. 1H-9721 [1] PLUG-EXPANSION  
114. 122-6785 [1] PLUG AS  
115. 6Y-2936 [1] SPACER (60X72X32-MM THK)  
116. 7T-3119 [1] HOUSING  
117. 6Y-2035 [1] GASKET  
118. 6V-7731 M [2] BOLT (M10X1.5X70-MM)  
119. 121-0709 [1] SPRING  
120. 3D-2824 [1] SEAL-O-RING  
121. 6B-8208 [1] BALL  
122. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
123. 8C-5748 M [7] BOLT (M8X1.25X55-MM)  
124. 121-7396 [1] VALVE GP-RELIEF (TORQUE CONVERTER INLET)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
125. 121-7405 [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
  6V-9178 [1] SEAL-O-RING  
  7X-4744 [1] SEAL-O-RING  
  106-9586 [1] SEAL-O-RING  
126. 122-3652 [2] PLUG  
127. 122-3649 [2] RING-RETAINING  
128. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
129. 175-0054 [1] SEAL-O-RING  
130. 174-9711 [1] GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28860296
 

192-0842: TRANSMISSION GP-DIRECT DRIVE

192-0842 TRANSMISSION GP-DIRECT DRIVE -2-WHEEL DRIVE
S/N 4ZN23965-50156
PART OF 202-7430 TRANSMISSION & MOUNTING GP, 107-3761 TRANSMISSION AR-DIRECT DRIVE
AN ATTACHMENT
i01399584 SEBP2886
1920842 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1920842 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1920842 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 174-9711 [1] GASKET  
2. 175-0054 [1] SEAL-O-RING  
3. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
4. 122-3649 [2] RING-RETAINING  
5. 122-3652 [2] PLUG  
6. 121-7405 [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
  6V-9178 [1] SEAL-O-RING  
  7X-4744 [1] SEAL-O-RING  
  106-9586 [1] SEAL-O-RING  
7. 121-7396 [1] VALVE GP-RELIEF (TORQUE CONVERTER INLET)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
9. 192-0843 [1] CASE AS  
10. 156-9276 [1] CASE-TRANSMISSION  
11. 9S-4191 [10] PLUG (9/16-18-THD)  
12. 3J-1907 [11] SEAL-O-RING  
13. 6V-8335 M [17] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
14. 7T-3022 [2] SLEEVE  
15. 123-8906 [1] CUP-TAPERED ROLLER  
16. 123-8905 [1] CONE-BEARING  
17. 9U-8886 [4] RING-SEAL  
18. 7T-3021 [2] SYNCHRONIZER GP  
19. 211-6758 [1] GEAR (19-TEETH)  
20. 121-1251 [1] GEAR (28-TEETH)  
21. 117-4650 [1] GEAR (37-TEETH)  
22. 6T-9160 [1] GEAR (43-TEETH)  
23. 6V-8500 [2] BEARING  
24. 7T-3017 [1] SPACER (52.5X59X9.6-MM THK)  
25. 7T-3018 [1] SLEEVE  
26. 6Y-2326 [1] RING  
27. 121-2062 [1] WASHER-THRUST (35X55X4-MM THK)  
28. 7T-3034 [1] SPACER (56.9X64.5X1.98-MM)  
29. 6T-9144 B [1] SHIM (0.051-MM THK)  
30. 6T-9147 B [1] SHIM (0.076-MM THK)  
31. 6T-9146 B [1] SHIM (0.127-MM THK)  
32. 6T-9145 B [1] SHIM (0.178-MM THK)  
33. 6T-9143 B [1] SHIM (0.381-MM THK)  
34. 6T-9142 B [1] SHIM (0.508-MM THK)  
35. 005-0469 [2] CUP-BEARING  
36. 005-0471 [2] CONE-BEARING  
37. 211-6759 [1] SHAFT (OUTPUT)(REAR)  
38. 123-8910 [1] CUP-TAPERED ROLLER  
39. 123-8909 [1] CONE-BEARING  
40. 7T-2646 [2] SPACER (66X79.5X2.02-MM THK)  
41. 6T-9166 B [2] SHIM (0.051-MM THK)  
42. 6T-9165 B [2] SHIM (0.076-MM THK)  
43. 6T-9164 B [2] SHIM (0.178-MM THK)  
44. 6T-9163 B [2] SHIM (0.599-MM THK)  
45. 7T-3051 [1] PLUG  
46. 8T-1580 [1] CUP-BEARING  
47. 8T-1581 [1] BEARING-TAPERED ROLLER  
48. 6Y-2737 [1] CUP-BEARING  
49. 6Y-2736 [1] CONE-BEARING  
50. 121-2500 [3] WASHER-THRUST (50X70X4-MM THK)  
51. 121-2511 [1] SHAFT  
52. 121-2537 [1] SHAFT-REVERSE  
53. 121-2545 [1] SHAFT AS-INPUT  
  123-0714 [1] BEARING  
  123-2920 [3] PLUG  
54. 121-2603 [1] GEAR (24-TEETH)  
55. 121-2604 [1] GEAR (27-TEETH)  
56. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
57. 122-1882 [2] PLATE-END  
58. 122-1881 [12] PLATE-CLUTCH  
59. 122-1880 [12] DISC  
60. 6V-8757 [3] RING-RETAINING  
61. 121-2801 [2] RETAINER  
62. 121-2802 [2] SPRING  
63. 121-2803 [2] PISTON  
64. 122-1875 [2] SEAL  
65. 122-1874 [2] SEAL-O-RING  
66. 122-6783 [2] RING-SEAL  
67. 6V-4368 [2] SEAL-O-RING  
68. 122-6787 [1] YOKE AS  
  [1] GUARD  
69. 122-1885 [2] SPACER (51X55X4-MM THK)  
70. 123-8913 [4] BEARING-ROLLER  
71. 172-5317 [2] BEARING-SPECIAL  
72. 7T-3195 [1] WASHER (12.3X47X6.35-MM THK)  
73. 6V-8097 M [1] BOLT (M12X1.75X30-MM)  
74. 5P-8066 [1] SEAL-O-RING  
75. 121-7385 [1] PUMP GP-TRANSMISSION  
  124-6612 [1] SEAL-LIP TYPE  
76. 7X-4741 [1] SEAL  
77. 122-1886 [1] RING-SEAL  
78. 014-5645 [3] BALL  
79. 6Y-1341 [2] SPRING  
80. 121-7403 [1] FORK-SHIFT  
81. 121-7389 [1] ROD AS-GEARSHIFT (FIRST, SECOND)  
82. 121-7390 [1] ROD AS-GEARSHIFT  
83. 7T-3249 [2] SCREW (3/8-24X0.75-IN)  
84. 123-8907 [2] CONE-BEARING  
85. 123-8908 [2] CUP-TAPERED ROLLER  
86. 127-3017 [1] SEAT AS  
87. 7T-3109 [1] PIN  
88. 121-7404 [1] FORK-SHIFT  
89. 3S-2093 [1] STRAP-CABLE  
90. 1U-8846 B [1] SEALANT-GASKET  
91. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
92. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
93. 121-7399 B [1] SHIM (0.05-MM THK)  
94. 121-7400 B [1] SHIM (0.08-MM THK)  
95. 121-7401 B [1] SHIM (0.18-MM THK)  
96. 121-7402 B [1] SHIM (0.6-MM THK)  
98. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
99. 142-1468 Y [1] VALVE GP-SOLENOID  
101. 3G-6927 [1] ADAPTER  
102. 7T-3253 [2] DOWEL  
103. 8T-2193 [1] SEAL-LIP TYPE  
104. 7T-2651 [1] STRAINER-SUCTION  
105. 4F-7952 [1] SEAL-O-RING  
106. 9W-5460 [1] RING  
107. 106-9861 [1] PLATE AS-COVER  
108. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
109. 7T-3251 [1] BREATHER (TRANSMISSION)  
110. 121-7391 [1] LEVER  
111. 120-9762 [3] SEAL-O-RING  
112. 7T-3111 [1] COVER  
113. 6K-0806 [1] STRAP-CABLE  
114. 1H-9721 [1] PLUG-EXPANSION  
115. 122-6785 [1] PLUG AS  
116. 6Y-2936 [1] SPACER (60X72X32-MM THK)  
117. 7T-3119 [1] HOUSING  
118. 6Y-2035 [1] GASKET  
119. 6V-7731 M [2] BOLT (M10X1.5X70-MM)  
120. 8C-5748 M [7] BOLT (M8X1.25X55-MM)  
121. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28860297
 

192-0844: TRANSMISSION GP-DIRECT DRIVE

192-0844 TRANSMISSION GP-DIRECT DRIVE -ALL WHEEL DRIVE
S/N 4ZN16044-50156
PART OF 202-7431 TRANSMISSION & MOUNTING GP
AN ATTACHMENT
i01399588 SEBP2886
1920844 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1920844 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1920844 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 174-9711 [1] GASKET  
2. 175-0054 [1] SEAL-O-RING  
3. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
4. 122-3652 [2] PLUG  
5. 121-7405 [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
  6V-9178 [1] SEAL-O-RING  
  7X-4744 [1] SEAL-O-RING  
  106-9586 [1] SEAL-O-RING  
6. 121-7396 [1] VALVE GP-RELIEF (TORQUE CONVERTER INLET)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
7. 8C-5748 M [7] BOLT (M8X1.25X55-MM)  
8. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
9. 192-0845 [1] CASE-FRONT TRANSMISSION  
10. 156-9275 [1] CASE-REAR TRANSMISSION  
11. 9S-4191 [10] PLUG (9/16-18-THD)  
12. 3J-1907 [11] SEAL-O-RING  
13. 6V-8335 M [14] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
14. 7T-3022 [2] SLEEVE  
15. 123-8906 [3] CUP-TAPERED ROLLER  
16. 123-8905 [3] CONE-BEARING  
17. 9U-8886 [4] RING-SEAL  
18. 7T-3021 [2] SYNCHRONIZER GP  
19. 161-3249 [1] RING-RETAINING  
20. 121-0630 [1] RETAINER  
21. 121-0697 [1] WASHER-THRUST (45X65X5-MM THK)  
22. 172-6050 [2] BEARING-SPECIAL  
23. 095-0927 [1] RING-RETAINING  
24. 121-0714 [1] PISTON  
25. 178-9566 [1] SPRING-PISTON  
26. 121-0885 [1] RETAINER  
27. 6T-9196 [1] SEAL  
28. 6T-9194 [9] PLATE  
29. 6Y-7957 [8] DISC-FRICTION  
30. 190-9767 [1] SHAFT AS (OUTPUT)  
31. 121-0904 [1] GEAR AS (36-TEETH)  
32. 123-8912 [2] BEARING-ROLLER  
33. 122-1877 [1] WASHER-THRUST (40X65X4-MM THK)  
34. 211-6758 [1] GEAR (19-TEETH)  
35. 121-1251 [1] GEAR (28-TEETH)  
36. 117-4650 [1] GEAR (37-TEETH)  
37. 6T-9160 [1] GEAR (43-TEETH)  
38. 121-1253 [1] GEAR (37-TEETH)  
39. 6V-8500 [2] BEARING  
40. 7T-3017 [1] SPACER (52.5X59X9.6-MM THK)  
41. 7T-3018 [1] SLEEVE  
42. 6Y-2326 [1] RING  
43. 122-1878 [1] RING-SEAL  
44. 122-1879 [1] SPACER (58X67.5X2-MM THK)  
  104-3288 B [1] SHIM (0.05-MM THK)  
  121-2059 B [1] SHIM (0.08-MM THK)  
  121-2060 B [1] SHIM (0.18-MM THK)  
  121-2061 B [1] SHIM (0.6-MM THK)  
45. 6V-7731 M [2] BOLT (M10X1.5X70-MM)  
46. 6Y-2035 [1] GASKET  
47. 7T-3119 [1] HOUSING  
48. 122-6785 [1] PLUG AS  
49. 121-2062 [1] WASHER-THRUST (35X55X4-MM THK)  
50. 7T-3034 [1] SPACER (56.9X64.5X1.98-MM)  
  6T-9144 B [1] SHIM (0.051-MM THK)  
  6T-9147 B [1] SHIM (0.076-MM THK)  
  6T-9146 B [1] SHIM (0.127-MM THK)  
  6T-9145 B [1] SHIM (0.178-MM THK)  
  6T-9143 B [1] SHIM (0.381-MM THK)  
  6T-9142 B [1] SHIM (0.508-MM THK)  
51. 1H-9721 [1] PLUG-EXPANSION  
52. 6K-0806 [1] STRAP-CABLE  
53. 7T-3111 [1] COVER  
54. 120-9762 [4] SEAL-O-RING  
55. 121-7391 [1] LEVER  
56. 7T-3251 [1] BREATHER  
57. 005-0469 [2] CUP-BEARING  
58. 005-0471 [2] CONE-BEARING  
59. 211-6759 [1] SHAFT (OUTPUT)(REAR)  
60. 123-8910 [1] CUP-TAPERED ROLLER  
61. 123-8909 [1] CONE-BEARING  
62. 7T-2646 [2] SPACER (66X79.5X2.02-MM THK)  
  6T-9166 B [2] SHIM (0.051-MM THK)  
  6T-9165 B [2] SHIM (0.076-MM THK)  
  6T-9164 B [2] SHIM (0.178-MM THK)  
  6T-9163 B [2] SHIM (0.599-MM THK)  
63. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
64. 106-9861 [1] PLATE AS-COVER  
65. 9W-5460 [1] RING  
66. 4F-7952 [1] SEAL-O-RING  
67. 7T-3051 [1] PLUG  
68. 8T-1580 [1] CUP-BEARING  
69. 8T-1581 [1] BEARING-TAPERED ROLLER  
70. 6Y-2737 [1] CUP-BEARING  
71. 6Y-2736 [1] CONE-BEARING  
72. 121-2500 [3] WASHER-THRUST (50X70X4-MM THK)  
73. 121-2511 [1] SHAFT  
74. 121-2537 [1] SHAFT-REVERSE  
75. 121-2545 [1] SHAFT AS-INPUT  
  123-0714 [1] BEARING  
  123-2920 [3] PLUG  
76. 121-2603 [1] GEAR (24-TEETH)  
77. 121-2604 [1] GEAR (27-TEETH)  
78. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
79. 122-1882 [2] PLATE-END  
80. 122-1881 [12] PLATE-CLUTCH  
81. 122-1880 [12] DISC  
82. 6V-8757 [3] RING-RETAINING  
83. 121-2801 [2] RETAINER  
84. 121-2802 [2] SPRING  
85. 121-2803 [2] PISTON  
86. 122-1875 [2] SEAL  
87. 122-1874 [2] SEAL-O-RING  
88. 122-6783 [2] RING-SEAL  
89. 6V-4368 [2] SEAL-O-RING  
90. 121-9875 M [4] BOLT (M10X1.5X55-MM)  
91. 122-6787 [2] YOKE AS  
    (EACH INCLUDES)
  [1] GUARD  
92. 122-1883 [1] SPACER (38X45X5-MM THK)  
93. 122-1885 [2] SPACER (51X55X4-MM THK)  
94. 123-8913 [4] BEARING-ROLLER  
95. 172-5317 [2] BEARING-SPECIAL  
96. 122-3649 [2] RING-RETAINING  
97. 7T-3195 [2] WASHER (12.3X47X6.35-MM THK)  
98. 123-2920 [1] PLUG  
99. 6V-8097 M [2] BOLT (M12X1.75X30-MM)  
100. 5P-8066 [2] SEAL-O-RING  
101. 122-1884 [1] SPACER (45X49X8-MM THK)  
102. 121-7385 [1] PUMP GP-TRANSMISSION  
  124-6612 [1] SEAL-LIP TYPE  
103. 7X-4741 [1] SEAL  
104. 122-1886 [1] RING-SEAL  
105. 014-5645 [3] BALL  
106. 6Y-1341 [2] SPRING  
107. 121-7403 [1] FORK-SHIFT  
108. 121-7389 [1] ROD AS-GEARSHIFT (FIRST, SECOND)  
109. 121-7390 [1] ROD AS-GEARSHIFT  
110. 7T-3249 [2] SCREW (3/8-24X0.75-IN)  
111. 123-8907 [2] CONE-BEARING  
112. 123-8908 [2] CUP-TAPERED ROLLER  
113. 7T-3109 [1] PIN  
114. 121-7404 [1] FORK-SHIFT  
115. 127-3017 [1] SEAT AS  
116. 6V-5100 [1] SEAL-O-RING  
117. 3S-2093 [1] STRAP-CABLE  
118. 7T-2651 [1] STRAINER-SUCTION  
119. 123-2919 M [2] NUT (M11X1-THD)  
120. 122-1876 [1] TUBE  
121. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
122. 123-2918 [2] SLEEVE  
123. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
  121-7399 B [1] SHIM (0.05-MM THK)  
  121-7400 B [1] SHIM (0.08-MM THK)  
  121-7401 B [1] SHIM (0.18-MM THK)  
  121-7402 B [1] SHIM (0.6-MM THK)  
124. 8T-2193 [2] SEAL-LIP TYPE  
125. 7T-3253 [2] DOWEL  
126. 3G-6927 [1] ADAPTER  
127. 142-1468 Y [1] VALVE GP-SOLENOID (DIRECTION)  
128. 121-4036 Y [1] VALVE GP-SOLENOID (ALL WHEEL DRIVE)  
129. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
   
    1U8846 SEALANT IS REQUIRED
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28860298
 

147-0200: TRANSMISSION GP-POWER SHIFT

147-0200 TRANSMISSION GP-POWER SHIFT
S/N 4ZN16044-20487
PART OF 142-4436 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT
i00735904 SEBP2886
1470200 TRANSMISSION GP-POWER SHIFT Parts scheme 1470200 TRANSMISSION GP-POWER SHIFT Parts scheme 1470200 TRANSMISSION GP-POWER SHIFT Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
7. 147-0245 [1] CASE AS-FRONT  
  9W-0717 [4] PLUG  
  147-0268 [4] PLUG  
8. 147-0218 [1] TUBE AS  
9. 148-8988 Y [2] VALVE GP-SOLENOID (FORWARD HIGH)  
10. 8C-8545 M [2] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
11. 120-9762 [5] SEAL-O-RING  
12. 148-8986 Y [1] VALVE GP-SOLENOID (REVERSE)  
13. 147-0253 [1] CASE AS-REAR  
  9W-0717 [11] PLUG  
14. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
15. 121-7402 B [1] SHIM (0.6-MM THK)  
16. 121-7401 B [1] SHIM (0.18-MM THK)  
17. 121-7400 B [1] SHIM (0.08-MM THK)  
18. 121-7399 B [1] SHIM (0.05-MM THK)  
19. 7T-2646 B [2] SPACER (66X79.5X2.02-MM THK)  
20. 6T-9166 B [2] SHIM (0.051-MM THK)  
21. 6T-9165 B [2] SHIM (0.076-MM THK)  
22. 6T-9164 B [2] SHIM (0.178-MM THK)  
23. 1U-8846 B [1] SEALANT-GASKET  
24. 147-0221 [1] PLUG-VALVE  
25. 7W-3556 [8] WASHER (14.27X20.57X1.5-MM THK)  
26. 147-0234 [4] BOLT (9/16-18X0.83-IN)  
27. 147-0239 [1] PLUG-CUP  
28. 5P-8066 [1] SEAL-O-RING  
29. 6V-8097 M [1] BOLT (M12X1.75X30-MM)  
30. 7T-3195 [1] WASHER (12.3X47X6.35-MM THK)  
31. 122-6787 [1] YOKE AS  
  [1] GUARD  
32. 8T-2193 [1] SEAL-LIP TYPE  
33. 121-7385 [1] PUMP GP-TRANSMISSION  
  124-6612 [1] SEAL-LIP TYPE  
34. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
35. 8C-5748 M [4] BOLT (M8X1.25X55-MM)  
36. 7X-4741 [1] SEAL  
37. 9S-4185 [3] PLUG (3/4-16-THD)  
38. 3K-0360 [3] SEAL-O-RING  
39. 123-8906 [3] CUP-TAPERED ROLLER  
40. 123-8905 [3] CONE-BEARING  
41. 121-0694 [2] WASHER-THRUST (40X70X4-MM THK)  
42. 172-5317 [6] BEARING-SPECIAL  
43. 123-8913 [2] BEARING-ROLLER  
44. 147-0224 [1] GEAR (45/32-TEETH)  
45. 8E-5707 [6] PLATE-END  
46. 6V-8757 [5] RING-RETAINING  
47. 6T-9194 [37] PLATE  
48. 6Y-7929 [37] DISC-FRICTION  
49. 9U-8875 [6] RING-RETAINING  
50. 121-2500 [4] WASHER-THRUST (50X70X4-MM THK)  
51. 147-0202 [2] GEAR (45/24-TEETH)  
52. 147-0257 [1] SHAFT AS-INPUT  
  123-2920 [3] PLUG  
53. 9U-8886 [4] RING-SEAL  
54. 123-8910 [1] CUP-TAPERED ROLLER  
55. 123-8909 [1] CONE-BEARING  
56. 7T-6655 [4] BEARING  
57. 147-0259 [2] SPACER (51.1X54.9X18.7-MM THK)  
58. 147-0238 [4] SPRING AS  
59. 6V-5100 [4] SEAL-O-RING  
60. 147-0228 [4] PISTON-CLUTCH  
61. 6T-9196 [6] SEAL  
62. 122-1886 [1] RING-SEAL  
63. 123-8907 [3] CONE-BEARING  
64. 123-8908 [3] CUP-TAPERED ROLLER  
65. 147-0212 [1] GEAR (42-TEETH)  
66. 147-0216 [1] GEAR (38-TEETH)  
67. 147-0203 [2] WASHER-THRUST (45.3X65X5-MM THK)  
68. 147-0258 [1] SPACER (46X50X16-MM THK)  
69. 147-0215 [1] GEAR (45/19-TEETH)  
70. 178-9566 [2] SPRING-PISTON  
71. 122-1877 [2] WASHER-THRUST (40X65X4-MM THK)  
72. 6Y-1192 [7] RING-SEAL  
73. 123-8912 [4] BEARING-ROLLER  
74. 9S-4191 [14] PLUG (9/16-18-THD)  
75. 147-0264 [1] GEAR (45/28-TEETH)  
76. 147-0260 [1] RETAINER-SPRING  
77. 095-0928 [1] RING-RETAINING  
78. 147-0205 [2] WASHER (55X78X5-MM THK)  
79. 147-0248 [1] SPACER (56.2X60X15.8-MM THK)  
80. 157-2090 [1] GEAR (38-TEETH)  
81. 173-0332 [1] SHAFT AS (COUNTERSHAFT)  
  163-9091 [1] PLUG  
82. 147-0242 [1] GEAR (48-TEETH)  
83. 150-3757 [2] BEARING  
84. 009-2062 [2] SEAL-O-RING  
85. 157-2088 [2] PISTON AS  
86. 147-0261 [1] SHAFT AS-OUTPUT (REAR)  
  9W-0717 [2] PLUG  
87. 095-0927 [1] RING-RETAINING  
88. 122-1879 [1] SPACER (58X67.5X2-MM THK)  
89. 104-3288 B [1] SHIM (0.05-MM THK)  
90. 121-2059 B [1] SHIM (0.08-MM THK)  
91. 121-2060 B [1] SHIM (0.18-MM THK)  
92. 121-2061 B [1] SHIM (0.6-MM THK)  
93. 147-0211 [1] ELBOW AS  
  3G-6927 [1] ADAPTER  
94. 6V-8335 M [16] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
95. 147-0262 [4] WASHER (19.1X24.1X1.5-MM THK)  
96. 147-0266 [2] BOLT (3/4-16X1.417-IN)  
97. 6V-2455 [1] SENSOR GP-SPEED  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 J [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E SLEEVE  
98. 1V-6341 [1] SEAL  
99. 3J-1907 [14] SEAL-O-RING  
100. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
101. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
102. 147-0232 [4] PLUG  
103. 9X-6615 M [12] BOLT (M5X0.8X30-MM)  
104. 7T-3253 [2] DOWEL  
105. 7T-3251 [1] BREATHER  
106. 7X-4744 [1] SEAL-O-RING  
107. 147-0255 [1] HOUSING-SPRING  
108. 147-0206 [1] SPRING  
109. 2H-3698 [1] BALL  
110. 147-0256 [1] SHAFT AS-REVERSE  
  9W-0717 [1] PLUG  
  147-0270 [1] ORIFICE  
111. 147-0226 [1] TUBE AS  
112. 147-0236 [1] TUBE AS  
113. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
114. 106-9861 [1] PLATE AS-COVER  
115. 121-4036 Y [1] VALVE GP-SOLENOID (TORQUE CONVERTER INLET)  
116. 6T-9202 [2] PLUG  
117. 121-7396 [1] VALVE GP-RELIEF (CLUTCH 2 SOLENOID)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
118. 147-0209 Y [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
119. 9W-5460 [1] RING  
120. 7T-2651 [1] STRAINER-SUCTION  
121. 4F-7952 [1] SEAL-O-RING  
122. 8T-1580 [1] CUP-BEARING  
123. 8T-0271 M [2] BOLT-SOCKET HEAD (M10X1.5X35-MM)  
124. 150-7732 [2] SEAL-O-RING  
125. 8T-1581 [1] BEARING-TAPERED ROLLER  
126. 6T-9163 B [2] SHIM (0.599-MM THK)  
127. 119-4740 [1] FILTER-OIL (STANDARD EFFICIENCY)  
128. 172-6050 [4] BEARING-SPECIAL  
129. 172-6743 [2] BEARING-SPECIAL  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   INCLUDED IN KIT-RECEPTACL
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28860299
 

147-0200: TRANSMISSION GP-POWER SHIFT

147-0200 TRANSMISSION GP-POWER SHIFT
S/N 4ZN20488-20524
PART OF 142-4436 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT
i01346318 SEBP2886
1470200 TRANSMISSION GP-POWER SHIFT Parts scheme 1470200 TRANSMISSION GP-POWER SHIFT Parts scheme 1470200 TRANSMISSION GP-POWER SHIFT Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
7. 147-0245 [1] CASE AS-FRONT  
  9W-0717 [4] PLUG  
  147-0268 [4] PLUG  
8. 147-0218 [1] TUBE AS  
9. 148-8988 Y [2] VALVE GP-SOLENOID (FORWARD HIGH)  
10. 8C-8545 M [2] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
11. 120-9762 [5] SEAL-O-RING  
12. 148-8986 Y [1] VALVE GP-SOLENOID (REVERSE)  
13. 147-0253 [1] CASE AS-REAR  
  9W-0717 [11] PLUG  
14. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
15. 121-7402 B [1] SHIM (0.6-MM THK)  
16. 121-7401 B [1] SHIM (0.18-MM THK)  
17. 121-7400 B [1] SHIM (0.08-MM THK)  
18. 121-7399 B [1] SHIM (0.05-MM THK)  
19. 7T-2646 B [2] SPACER (66X79.5X2.02-MM THK)  
20. 6T-9166 B [2] SHIM (0.051-MM THK)  
21. 6T-9165 B [2] SHIM (0.076-MM THK)  
22. 6T-9164 B [2] SHIM (0.178-MM THK)  
23. 1U-8846 B [1] SEALANT-GASKET  
24. 147-0221 [1] PLUG-VALVE  
25. 7W-3556 [8] WASHER (14.27X20.57X1.5-MM THK)  
26. 147-0234 [4] BOLT (9/16-18X0.83-IN)  
27. 147-0239 [1] PLUG-CUP  
28. 5P-8066 [1] SEAL-O-RING  
29. 6V-8097 M [1] BOLT (M12X1.75X30-MM)  
30. 7T-3195 [1] WASHER (12.3X47X6.35-MM THK)  
31. 122-6787 [1] YOKE AS  
  [1] GUARD  
32. 8T-2193 [1] SEAL-LIP TYPE  
33. 121-7385 [1] PUMP GP-TRANSMISSION  
  124-6612 [1] SEAL-LIP TYPE  
34. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
35. 8C-5748 M [4] BOLT (M8X1.25X55-MM)  
36. 7X-4741 [1] SEAL  
37. 9S-4185 [3] PLUG (3/4-16-THD)  
38. 3K-0360 [3] SEAL-O-RING  
39. 123-8906 [3] CUP-TAPERED ROLLER  
40. 123-8905 [3] CONE-BEARING  
41. 121-0694 [2] WASHER-THRUST (40X70X4-MM THK)  
42. 172-5317 [6] BEARING-SPECIAL  
43. 123-8913 [2] BEARING-ROLLER  
44. 147-0224 [1] GEAR (45/32-TEETH)  
45. 8E-5707 [6] PLATE-END  
46. 6V-8757 [5] RING-RETAINING  
47. 6T-9194 [37] PLATE  
48. 6Y-7929 [37] DISC-FRICTION  
49. 9U-8875 [6] RING-RETAINING  
50. 121-2500 [4] WASHER-THRUST (50X70X4-MM THK)  
51. 147-0202 [2] GEAR (45/24-TEETH)  
52. 147-0257 [1] SHAFT AS-INPUT  
  123-2920 [3] PLUG  
53. 9U-8886 [4] RING-SEAL  
54. 123-8910 [1] CUP-TAPERED ROLLER  
55. 123-8909 [1] CONE-BEARING  
56. 7T-6655 [4] BEARING  
57. 147-0259 [2] SPACER (51.1X54.9X18.7-MM THK)  
58. 147-0238 [4] SPRING AS  
59. 6V-5100 [4] SEAL-O-RING  
60. 147-0228 [4] PISTON-CLUTCH  
61. 6T-9196 [6] SEAL  
62. 122-1886 [1] RING-SEAL  
63. 123-8907 [3] CONE-BEARING  
64. 123-8908 [3] CUP-TAPERED ROLLER  
65. 147-0212 [1] GEAR (42-TEETH)  
66. 147-0216 [1] GEAR (38-TEETH)  
67. 147-0203 [2] WASHER-THRUST (45.3X65X5-MM THK)  
68. 147-0258 [1] SPACER (46X50X16-MM THK)  
69. 147-0215 [1] GEAR (45/19-TEETH)  
70. 178-9566 [2] SPRING-PISTON  
71. 122-1877 [2] WASHER-THRUST (40X65X4-MM THK)  
72. 6Y-1192 [7] RING-SEAL  
73. 123-8912 [4] BEARING-ROLLER  
74. 9S-4191 [14] PLUG (9/16-18-THD)  
75. 147-0264 [1] GEAR (45/28-TEETH)  
76. 147-0260 [1] RETAINER-SPRING  
77. 095-0928 [1] RING-RETAINING  
78. 147-0205 [2] WASHER (55X78X5-MM THK)  
79. 147-0248 [1] SPACER (56.2X60X15.8-MM THK)  
80. 157-2090 [1] GEAR (38-TEETH)  
81. 173-0332 [1] SHAFT AS (COUNTERSHAFT)  
  163-9091 [1] PLUG  
82. 147-0242 [1] GEAR (48-TEETH)  
83. 150-3757 [2] BEARING  
84. 009-2062 [2] SEAL-O-RING  
85. 157-2088 [2] PISTON AS  
86. 147-0261 [1] SHAFT AS-OUTPUT (REAR)  
  9W-0717 [2] PLUG  
87. 095-0927 [1] RING-RETAINING  
88. 122-1879 [1] SPACER (58X67.5X2-MM THK)  
89. 104-3288 B [1] SHIM (0.05-MM THK)  
90. 121-2059 B [1] SHIM (0.08-MM THK)  
91. 121-2060 B [1] SHIM (0.18-MM THK)  
92. 121-2061 B [1] SHIM (0.6-MM THK)  
93. 147-0211 [1] ELBOW AS  
  3G-6927 [1] ADAPTER  
94. 6V-8335 M [16] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
95. 147-0262 [4] WASHER (19.1X24.1X1.5-MM THK)  
96. 147-0266 [2] BOLT (3/4-16X1.417-IN)  
97. 6V-2455 [1] SENSOR GP-SPEED  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 J [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 BE SLEEVE  
98. 1V-6341 [1] SEAL  
99. 3J-1907 [14] SEAL-O-RING  
100. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
101. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
102. 147-0232 [4] PLUG  
103. 9X-6615 M [12] BOLT (M5X0.8X30-MM)  
104. 7T-3253 [2] DOWEL  
105. 7T-3251 [1] BREATHER  
106. 7X-4744 [1] SEAL-O-RING  
107. 147-0255 [1] HOUSING-SPRING  
108. 147-0206 [1] SPRING  
109. 2H-3698 [1] BALL  
110. 147-0256 [1] SHAFT AS-REVERSE  
  9W-0717 [1] PLUG  
  147-0270 [1] ORIFICE  
111. 147-0226 [1] TUBE AS  
112. 147-0236 [1] TUBE AS  
113. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
114. 106-9861 [1] PLATE AS-COVER  
115. 121-4036 Y [1] VALVE GP-SOLENOID (TORQUE CONVERTER INLET)  
116. 6T-9202 [2] PLUG  
117. 121-7396 [1] VALVE GP-RELIEF (CLUTCH 2 SOLENOID)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
118. 147-0209 Y [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
119. 9W-5460 [1] RING  
120. 7T-2651 [1] STRAINER-SUCTION  
121. 4F-7952 [1] SEAL-O-RING  
122. 8T-1580 [1] CUP-BEARING  
123. 8T-0271 M [2] BOLT-SOCKET HEAD (M10X1.5X35-MM)  
124. 150-7732 [2] SEAL-O-RING  
125. 8T-1581 [1] BEARING-TAPERED ROLLER  
126. 6T-9163 B [2] SHIM (0.599-MM THK)  
127. 1R-0772 [1] FILTER ELEMENT AS-OIL (HYDRAULIC)  
128. 172-6050 [4] BEARING-SPECIAL  
129. 172-6743 [2] BEARING-SPECIAL  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   INCLUDED IN KIT-RECEPTACL
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Fifth Gear Lockout Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Transmission Magnetic Screen - Clean
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Transmission Oil - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Transmission Oil Level - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Technical Information Bulletin
Transmission May Remain In Neutral Following Operation Of The Neutralizer Push Button Switch
Transmission May Remain In Neutral Following Operation Of The Neutralizer Push Button Switch
Bearing Part Number Listed Incorrectly For Transmissions
Bearing Part Number Listed Incorrectly For Transmissions
Direct Drive Transmission Front Output (All Wheel Dirve) Shaft Failures
Direct Drive Transmission Front Output (All Wheel Dirve) Shaft Failures
Transmission Controls (Shift Lever) May Fail
Transmission Controls (Shift Lever) May Fail
Specifications
Torque Converter<BR> 111-7808
416C, 426C, 428C, 436C & 438C BACKHOE LOADERS TRANSMISSION
Transmission
416C, 426C, 428C, 436C & 438C BACKHOE LOADERS TRANSMISSION
Introduction
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT
Transmission
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Systems Operation
Systems Operation
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Testing and Adjusting
Testing And Adjusting
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT
Bench Test Procedures
Bench Test Procedure For A 416C, 416D, 420D, 424D, 426C, 428D, 430D, 432D, 436C, 438D, and 442D Backhoe Loader Transmission (Standard Shift) {3030, 3174}
Bench Test Procedure For A 416C, 416D, 420D, 424D, 426C, 428D, 430D, 432D, 436C, 438D, and 442D Backhoe Loader Transmission (Standard Shift) {3030, 3174}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Engine, Torque Converter, Transmission &amp; Implement Pump
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC
Engine &amp; Transmission
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC
Solenoid Valve (Transmission)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Transmission (Direct Drive) (If Equipped)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Transmission (Direct Drive) (If Equipped)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Transmission (Powershift) (If Equipped)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Transmission (Powershift) (If Equipped)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Engine, Torque Converter &amp; Transmission
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Engine &amp; Transmission
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Service Magazine
C-Series Backhoe Loaders Are Being Updated {1000,0685,0720,1001,1013,1350,3030,7950}
1998/01/26
Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08
Use 152-7055 Spring Compressor For Disassembly And Assembly Of Transmission Clutch Shaft Assemblies {3150}
1998/10/05
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Assembling The Transmission Thrust Bearings For Backhoe Loaders {3030}
1999/06/28
Seals for the Relief Valves on the Transmission {5117}
2001/06/04
New Lip Seals Are Used in the Transmission {3030, 3066}
2003/09/08
A New Shaft Assembly Is Now Used {3030}
2003/10/20
A New Torque Converter Is Now Used {3101}
2004/06/28
An Improved Gear Is Now Used in Transmissions {3030}
2004/07/05
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog 416C :

TRANSMISSION GP-DIRECT DRIVE
111-7814 TRANSMISSION GP-DIRECT DRIVE
142-4437 TRANSMISSION AR-POWER SHIFT
142-4436 TRANSMISSION AR-POWER SHIFT
107-3762 TRANSMISSION AR-DIRECT DRIVE
107-3761 TRANSMISSION AR-DIRECT DRIVE
TRANSMISSION & MOUNTING GP
202-7432 TRANSMISSION & MOUNTING GP
TRANSMISSION & MOUNTING GP
202-7431 TRANSMISSION & MOUNTING GP
TRANSMISSION & MOUNTING GP
202-7430 TRANSMISSION & MOUNTING GP
TRANSMISSION GP-DIRECT DRIVE
111-7814 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7814 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7815 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7815 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7815 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
192-0842 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
192-0844 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-POWER SHIFT
147-0200 TRANSMISSION GP-POWER SHIFT

Truck sale:

Caterpillar 416C
 
Caterpillar 416C
- backhoe loader
FOLEY, INC.
Caterpillar 416C, bucket, Construction
4,063 
Caterpillar 416C, bucket, Construction
- bucket
FINNING CANADA
 
37,100 
Caterpillar 416C, backhoe loader, Construction


 
26,000 
Caterpillar 416C, backhoe loader, Construction


 
34,000 
Caterpillar 416C, backhoe loader, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.