152-1796 CYLINDER GP-STABILIZER -RH S/N 4ZN16044-50156 101.6-MM (4-IN) BORE X 541-MM (21.3-IN) STROKE PART OF 154-5437 HYDRAULIC AR 416C

HYDRAULIC SYSTEM

CYLINDER GP

0. 152-1796 CYLINDER G
1. 152-1806 CYLINDER G
2. 173-1926 CYLINDER G
3. 173-1927 CYLINDER G
4. 169-2967 CYLINDER G
5. 184-3709 CYLINDER G
6. 169-9529 CYLINDER G
7. 107-0625 CYLINDER G

FUEL SYSTEM

DRAIN GP-FUEL

8. 120-9641 DRAIN GP-E

HYDRAULIC SYSTEM

DRIVE GP

9. 112-1826 DRIVE & MT
0. INFORMATION

BACKHOE LOADER 416C BACKHOE LOADER 4ZN
416C Backhoe Loader Center Pivot, Single Tilt 4ZN16044-50156 (MACHINE) POWERED BY 3054 Engine SEBP2886 416C 4ZN (1996)

HYDRAULIC SYSTEM

CYLINDER GP

185-1839 CYLINDER GP-MULTIPURPOSE BUKT

9T-4006 CYLINDER GP-MULTIPURPOSE BUKT

152-1796 CYLINDER GP-STABILIZER

152-1806 CYLINDER GP-STABILIZER

173-1926 CYLINDER GP-STABILIZER

173-1927 CYLINDER GP-STABILIZER

#SEBP28860390

152-1796: CYLINDER GP-STABILIZER

CYLINDER GP-STABILIZER

152-1796 CYLINDER GP-STABILIZER -RH
S/N 4ZN16044-50156
101.6-MM (4-IN) BORE X 541-MM (21.3-IN) STROKE
PART OF 154-5437 HYDRAULIC AR

i00976435 SEBP2886

1521796 CYLINDER GP-STABILIZER Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	131-1851	[1]	CYLINDER AS
2.	7F-6112	[1]	BOLT (1-1/4-12X3-IN)
3.	4K-0684	[1]	WASHER-HARD (34X55X6-MM THK)
4.	6J-2797	[1]	RING-WEAR
5.	5J-5402	[1]	SEAL AS
6.	4T-7354	[1]	PISTON
7.	9X-4611	[1]	SEAL-O-RING
8.	168-2271	[1]	RING-BACKUP
9.	152-1863	[1]	HEAD
10.	131-1856	[1]	ROD AS
	9R-0321	[2]	BUSHING
11.	4T-6128	[1]	RING
12.	150-6744	[1]	SEAL-BUFFER (26-PIN)
13.	4T-6126	[1]	SEAL-U-CUP
14.	150-6745	[1]	SEAL-LIP TYPE
15.	6V-6718 M	[1]	SCREW-SELF-TAPPING (8-32X0.25-IN)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP28860391

152-1806: CYLINDER GP-STABILIZER

CYLINDER GP-STABILIZER

152-1806 CYLINDER GP-STABILIZER -LH
S/N 4ZN16044-17823
101.6-MM (4-IN) BORE X 541-MM (21.3-IN) STROKE
PART OF 154-5437 HYDRAULIC AR

i00975674 SEBP2886

1521806 CYLINDER GP-STABILIZER Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	131-1850	[1]	CYLINDER AS
2.	7F-6112	[1]	BOLT (1-1/4-12X3-IN)
3.	4K-0684	[1]	WASHER-HARD (34X55X6-MM THK)
4.	6J-2797	[1]	RING-WEAR
5.	5J-5402	[1]	SEAL AS
6.	4T-7354	[1]	PISTON
7.	9X-4611	[1]	SEAL-O-RING
8.	2K-6830	[1]	RING-BACKUP
9.	152-1863	[1]	HEAD
10.	131-1856	[1]	ROD AS
	9R-0321	[2]	BUSHING
11.	4T-6128	[1]	RING
12.	150-6744	[1]	SEAL-BUFFER (26-PIN)
13.	4T-6126	[1]	SEAL-U-CUP
14.	150-6745	[1]	SEAL-LIP TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP28860392

173-1926: CYLINDER GP-STABILIZER

CYLINDER GP-STABILIZER

173-1926 CYLINDER GP-STABILIZER -RH
S/N 4ZN16044-50156
101.6-MM (4-IN) BORE X 541-MM (21.3-IN) STROKE
PART OF 154-5437 HYDRAULIC AR

i01164716 SEBP2886

1731926 CYLINDER GP-STABILIZER Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	172-2347	[1]	CYLINDER AS
	9R-0321	[2]	BUSHING
	7J-9903	[1]	BOSS
2.	7F-6112	[1]	BOLT (1-1/4-12X3-IN)
3.	4K-0684	[1]	WASHER-HARD (34X55X6-MM THK)
4.	6J-2797	[1]	RING-WEAR
5.	5J-5402	[1]	SEAL AS
6.	172-2353	[1]	PISTON
7.	175-7900	[1]	SEAL-O-RING
8.	168-2271	[1]	RING-BACKUP
9.	152-1863	[1]	HEAD
10.	172-2354	[1]	ROD AS
	9R-0321	[2]	BUSHING
11.	4T-6128	[1]	RING
12.	167-2197	[1]	SEAL AS-BUFFER
13.	167-2305	[1]	SEAL-U-CUP
14.	167-2458	[1]	SEAL-WIPER
15.	6V-6718 M	[1]	SCREW-SELF-TAPPING (8-32X0.25-IN)
	M		METRIC PART

#SEBP28860393

173-1927: CYLINDER GP-STABILIZER

CYLINDER GP-STABILIZER

173-1927 CYLINDER GP-STABILIZER -LH
S/N 4ZN16044-50156
101.6-MM (4-IN) BORE X 541-MM (21.3-IN) STROKE
PART OF 154-5437 HYDRAULIC AR

i01164735 SEBP2886

1731927 CYLINDER GP-STABILIZER Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	172-2349	[1]	CYLINDER AS (LH)
	7J-9903	[1]	BOSS
	9R-0321	[2]	BUSHING
2.	7F-6112	[1]	BOLT (1-1/4-12X3-IN)
3.	4K-0684	[1]	WASHER-HARD (34X55X6-MM THK)
4.	6J-2797	[1]	RING-WEAR
5.	5J-5402	[1]	SEAL AS
6.	172-2353	[1]	PISTON
7.	175-7900	[1]	SEAL-O-RING
8.	168-2271	[1]	RING-BACKUP
9.	152-1863	[1]	HEAD
10.	172-2354	[1]	ROD AS
	9R-0321	[2]	BUSHING
11.	4T-6128	[1]	RING
12.	167-2197	[1]	SEAL AS-BUFFER
13.	167-2305	[1]	SEAL-U-CUP
14.	167-2458	[1]	SEAL-WIPER
15.	6V-6718 M	[1]	SCREW-SELF-TAPPING (8-32X0.25-IN)
	M		METRIC PART

#SEBP28860394

169-2967: CYLINDER GP-STICK

CYLINDER GP-STICK

169-2967 CYLINDER GP-STICK
S/N 4ZN16044-50156
114.3MM (4.5IN) BORE X 695MM (27.28IN) STROKE
PART OF 154-5437 HYDRAULIC AR

i01128934 SEBP2886

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	169-2968	[1]	CYLINDER AS
	9R-0139	[2]	BUSHING
	6E-1497	[1]	BOSS
2.	8F-5535	[1]	BOLT (1-1/2-12X4-IN)
3.	3S-6162	[1]	WASHER-HARD (40.5X67X6-MM THK)
4.	169-2969	[1]	PISTON
5.	175-7902	[1]	SEAL-O-RING
6.	1K-7095	[1]	RING-BACKUP
7.	174-7432	[1]	HEAD
8.	134-2659	[1]	ROD AS
	9R-0139	[2]	BUSHING
9.	9X-7269	[1]	SEAL AS
10.	4J-3745	[1]	RING-WEAR
11.	225-3281	[1]	SEAL-WIPER
12.	167-2312	[1]	SEAL-U-CUP
13.	167-2201	[1]	SEAL AS-BUFFER
14.	8T-0785	[1]	RING-WEAR
15.	6V-6718 M	[1]	SCREW-SELF-TAPPING (8-32X0.25-IN)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP28860395

184-3709: CYLINDER GP-STICK

CYLINDER GP-STICK

184-3709 CYLINDER GP-STICK
S/N 4ZN16044-50156
114.3MM BORE X 695MM STROKE
PART OF 154-5437 HYDRAULIC AR

i01368708 SEBP2886

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	134-2659	[1]	ROD AS
	9R-0139	[2]	BUSHING
2.	169-2969	[1]	PISTON
3.	235-9832	[1]	HEAD
4.	184-6808	[1]	CYLINDER AS
	9R-0139	[2]	BUSHING
	6E-1497	[1]	BOSS
5.	167-2201	[1]	SEAL AS-BUFFER
6.	167-2312	[1]	SEAL-U-CUP
7.	225-3281	[1]	SEAL-WIPER
8.	175-7902	[1]	SEAL-O-RING
9.	3S-6162	[1]	WASHER-HARD (40.5X67X6-MM THK)
10.	4J-3745	[1]	RING-WEAR
11.	4J-9220	[1]	RING-BACKUP
12.	4M-0189	[1]	SEAL-O-RING
13.	8F-5535	[1]	BOLT (1-1/2-12X4-IN)
14.	8T-0785	[1]	RING-WEAR
15.	9X-7269	[1]	SEAL AS
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP28860396

169-9529: CYLINDER GP-SWING

CYLINDER GP-SWING

169-9529 CYLINDER GP-SWING
S/N 4ZN16044-50156
101.6-MM (4-IN) BORE X 249-MM (9.8-IN) STROKE
PART OF 154-5437 HYDRAULIC AR

i01104121 SEBP2886

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	116-6857	[1]	CYLINDER AS
1A.	9T-2883	[2]	BEARING
2.	169-6947	[1]	NUT (1-1/2-12-THD)
3.	6J-2797 J	[1]	RING-WEAR
4.	8C-9160 J	[1]	SEAL AS
5.	112-1773	[1]	PISTON
6.	175-7900 J	[1]	SEAL-O-RING
7.	168-2271 J	[1]	RING-BACKUP
8.	6E-5649	[1]	WASHER (1.25-MM THK)
9.	6E-5651	[1]	HEAD
10.	4T-5613 J	[1]	RING-WEAR
11.	308-1845 J	[1]	SEAL-WIPER
12.	421-4023 J	[1]	SEAL-U-CUP
13.	289-2935 J	[1]	SEAL AS-BUFFER
14.	125-7894	[1]	ROD AS
14A.	102-3582	[1]	WASHER (11X19.5X2.5-MM THK)
14B.	2Y-5821	[1]	RING
14C.	3N-5739	[1]	SPRING
14D.	6E-1478	[1]	PLUNGER
14E.	9R-9505	[2]	BUSHING

			AVAILABLE REPAIR KIT(S):
	380-9482 J	[1]	KIT-HYD CYLINDER SEAL
	J		KIT MARKED J SERVICES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP28860397

107-0625: CYLINDER GP-TILT

CYLINDER GP-TILT

107-0625 CYLINDER GP-TILT
S/N 4ZN16044-50156
82.55MM (3.25 IN) BORE X 642.1MM (25.28 IN) STROKE
PART OF 154-5437 HYDRAULIC AR

i00735880 SEBP2886

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9T-5490	[1]	CYLINDER AS
2.	7J-9903	[1]	BOSS
3.	8T-3851 M	[1]	BOSS-WELD (M10X1.5X17.5-MM)
4.	8J-6371	[1]	RING-WEAR
5.	6J-0793	[1]	SEAL AS
	6J-0789	[1]	RING-EXPANDER
	6J-0790	[1]	SEAL
6.	4T-7010	[1]	PISTON
7.	4T-7014	[1]	HEAD
8.	167-2302	[1]	SEAL-U-CUP
9.	175-7897	[1]	SEAL-O-RING
10.	6J-1381	[1]	RING-BACKUP
11.	9T-3948	[1]	ROD AS
12.	9R-0320	[2]	BUSHING
13.	167-2192	[1]	SEAL AS-BUFFER
14.	4T-6779	[1]	RING
15.	7J-5639	[1]	BOLT-LOCKING (1-14X2.5-IN)
16.	5P-8250	[1]	WASHER (28X49X5-MM THK)
17.	167-2455	[1]	SEAL-WIPER
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP28860398

120-9641: DRAIN GP-ECOLOGY

DRAIN GP-ECOLOGY

120-9641 DRAIN GP-ECOLOGY
S/N 4ZN16044-50156
AN ATTACHMENT

i00200938 SEBP2886

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2M-9780	[1]	SEAL-O-RING
2.	133-6337	[1]	PLUG-DRAIN
3.	134-8474	[1]	TUBE AS-DRAIN

#SEBP28860399

112-1826: DRIVE & MTG GP-PUMP

DRIVE & MTG GP-PUMP

112-1826 DRIVE & MTG GP-PUMP
S/N 4ZN16044-50156
PART OF 154-5437 HYDRAULIC AR

i00200867 SEBP2886

1121826 DRIVE & MTG GP-PUMP Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-9405 M	[4]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
2.	9U-8886	[1]	RING-SEAL
3.	115-1918	[1]	PLATE
4.	117-3534	[1]	ADAPTER
5.	274-4555	[1]	HUB
6.	128-5596 Y	[1]	SHAFT GP-PUMP DRIVE
7.	175-7904	[1]	SEAL-O-RING
8.	8T-4122	[2]	WASHER-HARD (17X32X3.5-MM THK)
9.	8T-7338 M	[2]	BOLT (M16X2X45-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Operation and Maintenance Manual

Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Swing Frame and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Special Instruction

Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}
Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Service Letter-NACD

Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders

Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING CYLINDER ON CERTAIN 416C AND 416D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING CYLINDER ON CERTAIN 416C AND 416D BACKHOE LOADERS

Technical Information Bulletin

Tilt Cylinders May Form A Void During Some Applications
Tilt Cylinders May Form A Void During Some Applications

Interference Between The Lower E-Stick Pad Retaining Bolt And The Rod End Tube Assembly
Interference Between The Lower E-Stick Pad Retaining Bolt And The Rod End Tube Assembly

Improved Routing Of E-Stick Extension Cylinder Lines
Improved Routing Of E-Stick Extension Cylinder Lines

THE HEAD OF THE STICK CYLINDER MAY LOOSEN
THE HEAD OF THE STICK CYLINDER MAY LOOSEN

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Specifications

Boom Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Bucket Cylinder (Backhoe)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Bucket Cylinder (Extendable Stick)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stick Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Swing Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Pin Coupler Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Multipurpose Bucket Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Lift Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Tilt Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Information Release Memo

PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS

Service Letter-APD

Bench Test Procedures

Disassembly and Assembly

Bucket Tilt Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Bucket Tilt Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Loader Lift Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Multi-purpose Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Swing Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stabilizer Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Boom Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Sideshift Assembly
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stabilizer Cylinders (428B)
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stick, Extendible Stick, Extendible Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Extendible Stick Cylinder & Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Service Magazine

Correction To Backhoe Loader C-Series Parts Manuals{7222,7567}
1997/07/28

Torque Increased For Piston Retaining Nut In Swing Cylinder Groups{5105,7562}
1997/08/25

New Stabilizer Pads Are Wider{7222}
1998/03/09

Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08

Lubrication Of The Stabilizer Pad Pin On Backhoe Loaders {7528,7222,7581}
1999/01/25

Splined Pins For Backhoe Loaders {6506,6502}
1999/06/28

Special Instruction For Rebuilding The Backhoe Loader Pin Bores Is Now Available {6101,6104,6119,6501,6502,6503,6506,6508,6515,6518,6533,7054,7222}
1999/09/20

New Cylinders Use Piston To Stop Instead Of Piston Bolt {5106,5223,5458,5468,5457,5486}
1999/10/04

New Lock Valves for the Stabilizers Keep the Cylinder Head Tight {5057, 5067, 5468}
2000/06/05

The Check Valve Has Been Relocated {5057, 5067, 5104}
2001/04/16

Correction to Disassembly and Assembly, SENR1209 for the Boom and Stick Cylinder {5456, 5458}
2001/05/07

Correction to Specifications Manual SENR1207-03 {5104}
2001/05/14

New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30

Correction to Testing and Adjusting, SENR1272 for the Loader Cycle Times {5457}
2001/07/02

Correction to Specifications, SENR1207 , "Stick Cylinder" {5458}
2001/10/01

Correction to Specifications, SENR1207 , "Stabilizer Cylinder" {5468}
2001/10/01

New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08

Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30

New Stabilizer Pads Make Stabilizer Operation Quieter {5468, 7150, 7222}
2001/10/08

Correction to Service Manual, SENR1272 , "Operational Checks" {5102, 5104, 5105, 5456, 5457, 5486}
2001/11/05

Correction to Specifications , "Tilt Cylinder" {5104}
2002/04/08

Special Instruction, REHS1356, "Field Installation of the Caterpillar Cushion Swing System Is Available" {5057, 5105, 5454}
2002/11/25

Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09

New Swing Cylinders Improve Service Life {5105}
2005/03/21

Grease the Swing Frame and Maintain the Gap Between the Spacers and the Swing Frame {5105, 6506}
2005/04/25

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 416C :

9T-4006 CYLINDER GP-MULTIPURPOSE BUKT

185-1839 CYLINDER GP-MULTIPURPOSE BUKT

107-0624 CYLINDER GP-LIFT

164-7174 CYLINDER GP-EXTENDABLE STICK

155-6586 CYLINDER GP-EXTENDABLE STICK

152-9148 CYLINDER GP-BOOM

6E-1964 CYLINDER GP-BACKHOE BUCKET

126-8308 CYLINDER GP-BACKHOE BUCKET

152-1806 CYLINDER GP-STABILIZER

173-1926 CYLINDER GP-STABILIZER

173-1927 CYLINDER GP-STABILIZER

169-2967 CYLINDER GP-STICK

184-3709 CYLINDER GP-STICK

169-9529 CYLINDER GP-SWING

107-0625 CYLINDER GP-TILT

120-9641 DRAIN GP-ECOLOGY

Truck sale:

Caterpillar 416C
- backhoe loader
FOLEY, INC.

4,063

Caterpillar 416C, bucket, Construction
- bucket
FINNING CANADA

37,100

Caterpillar 416C, backhoe loader, Construction

26,000

Caterpillar 416C, backhoe loader, Construction

34,000

Caterpillar 416C, backhoe loader, Construction