AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9R-9939 CONTROL GP-HYDRAULIC HAND S/N 4ZN16044-50156 PART OF 154-5483 CHASSIS AR 416C BACKHOE LOADER


OPERATOR STATION
CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC
CONTROL GP-STEERING

BACKHOE LOADER 416C BACKHOE LOADER 4ZN
 416C Backhoe Loader Center Pivot, Single Tilt 4ZN16044-50156 (MACHINE) POWERED BY 3054 Engine SEBP2886 416C 4ZN   (1996)

OPERATOR STATION

CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC HAND
112-1842 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
9R-9705 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
9R-9939 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC PEDAL
106-6373 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-HYDRAULIC PEDAL
113-0720 CONTROL GP-HYDRAULIC PEDAL
KIT-HYDRAULIC HAND CONTROL
166-6017 KIT-HYDRAULIC HAND CONTROL
 

#SEBP28860690
 

9R-9939: CONTROL GP-HYDRAULIC HAND

9R-9939 CONTROL GP-HYDRAULIC HAND
S/N 4ZN16044-50156
PART OF 154-5483 CHASSIS AR
i00729774 SEBP2886
9R9939 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 BC [6] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [3] RING-RETAINING  
3. 5H-3193 [1] PIN-SPRING  
4. 8T-4766 [1] ROD END  
5. 8T-4773 [1] BALL JOINT  
6. 8T-4815 [2] ROD END  
7. 8T-9501 [2] SCREW (10-16X0.75-IN)  
8. 9R-1765 [1] COVER-TOP (TOP)  
9. 9R-1766 [1] COVER-BOTTOM (BOTTOM)  
10. 9R-1767 [1] BOOT  
11. 9R-4917 [2] ROD-CONTROL  
12. 9R-8165 [4] BEARING  
13. 9R-9901 [4] FASTENER (CLIP)  
14. 9R-9941 [1] BRACKET AS  
  6V-4248 M [4] BOLT (M10X1.5X25-MM)  
15. 9R-9946 [1] JOINT AS  
16. 9X-2065 M [2] NUT (M10X1.5-THD, LH)  
17. 104-1970 [1] ROD AS  
18. 104-9488 [1] PLATE  
19. 107-5591 [1] NUT-JAM (3/4-16-THD)  
20. 110-8884 [1] PLATE  
21. 115-4343 [1] LEVER AS  
22. 134-0453 M [2] TURNBUCKLE (M10X1.5X50-MM)  
23. 138-6108 [2] SPACER (8.7X20X45-MM THK)  
24. 140-6021 [1] PLATE  
25. 145-4458 C [1] PIN  
26. 200-1790 [1] DAMPER AS  
  095-9230 [1] PIN-SPRING  
27. 3S-2093 [1] STRAP-CABLE  
28. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
29. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4133 M [10] NUT (M10X1.5-THD)  
31. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
32. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
33. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 8T-9515 M [3] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
35. 9R-2806 [1] PIN  
36. 9R-2807 [2] CLIP (RETAINER)  
37. 9R-3067 [1] PIN  
38. 117-5671 A [1] BOOT  
    (PART OF 106-6261, 119-8172 & 119-8173 HYDRAULIC AR)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP28860691
 

106-2404: CONTROL GP-HYDRAULIC LOCKOUT

106-2404 CONTROL GP-HYDRAULIC LOCKOUT
S/N 4ZN16044-50156
AN ATTACHMENT
i00200824 SEBP2886
1062404 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-2405 [1] PLATE AS  
2. 106-2409 [1] PIN  
3. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
4. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP28860692
 

106-6373: CONTROL GP-HYDRAULIC PEDAL

106-6373 CONTROL GP-HYDRAULIC PEDAL
S/N 4ZN16044-50156
PART OF 106-6253, 154-5431, 154-5433 HYDRAULIC AR
AN ATTACHMENT
i00200838 SEBP2886
1066373 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-0593 [1] PEDAL AS  
2. 133-8916 [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
3. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
4. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4133 M [4] NUT (M10X1.5-THD)  
6. 9R-2806 [1] PIN  
7. 9R-2807 [1] CLIP (RETAINER)  
8. 128-7341 [1] SHAFT AS  
9. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
10. 109-0533 [1] SEAL  
11. 155-6011 [1] ROD  
12. 106-6374 [1] SUPPORT AS  
13. 9R-2614 [2] BEARING  
14. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
15. 8T-4773 [1] BALL JOINT  
16. 8T-4815 [1] ROD END  
17. 195-6550 [1] WASHER-WAVE  
  M   METRIC PART
 

#SEBP28860693
 

113-0720: CONTROL GP-HYDRAULIC PEDAL

113-0720 CONTROL GP-HYDRAULIC PEDAL
S/N 4ZN16044-50156
LEFT FT FACTORY
PART OF 119-4006, 154-5433 HYDRAULIC AR
AN ATTACHMENT
i00200884 SEBP2886
1130720 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-0592 [1] PEDAL AS  
2. 106-6374 [1] SUPPORT AS  
3. 9R-2614 [2] BEARING  
4. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4133 M [4] NUT (M10X1.5-THD)  
6. 9R-2806 [1] PIN  
7. 9R-2807 [1] CLIP (RETAINER)  
8. 128-7341 [1] SHAFT AS  
9. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
10. 109-0533 [1] SEAL  
11. 155-6011 [1] ROD  
12. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
13. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
14. 8T-4773 [1] BALL JOINT  
15. 8T-4815 [1] ROD END  
16. 195-6550 [1] WASHER-WAVE  
  M   METRIC PART
 

#SEBP28860694
 

159-4922: CONTROL GP-STEERING & XMSN

159-4922 CONTROL GP-STEERING & XMSN
S/N 4ZN16044-50156
SHUTTLE/TILT
AN ATTACHMENT
i00967882 SEBP2886
1594922 CONTROL GP-STEERING & XMSN Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8894 M [3] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
2. 117-7038 [1] STEERING COLUMN  
2A. 149-0777 [1] KNOB  
2B. 149-0782 [1] KIT-TILT LEVER  
2C. 149-0783 [1] KIT-SHAFT  
2D. 149-0784 [1] KIT-HOUSING  
2E. 149-0780 [1] KIT-GAS SPRING  
3. 166-7501 [1] CONTROL GP-TRANSMISSION  
4. 8Y-7199 [1] PLATE  
5. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
8. 7X-6324 [1] CLAMP-COLUMN  
9. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
10. 6V-8227 M [1] NUT (M18X1.5-THD)  
11. 135-4566 [4] SHIM (0.5-MM THK)  
12. 153-9580 Y [1] STEERING WHEEL GP  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28860695
 

159-4923: CONTROL GP-STEERING & XMSN

159-4923 CONTROL GP-STEERING & XMSN
S/N 4ZN16044-50156
POWER SHIFT, TILT
Type 1
AN ATTACHMENT
i00968333 SEBP2886
1594923 CONTROL GP-STEERING & XMSN Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8894 M [3] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
2. 117-7038 [1] STEERING COLUMN  
2A. 149-0777 [1] KNOB  
2B. 149-0782 [1] KIT-TILT LEVER  
2C. 149-0783 [1] KIT-SHAFT  
2D. 149-0784 [1] KIT-HOUSING  
2E. 149-0785 [1] KIT-GAS SPRING  
3. 158-6209 [1] CONTROL GP-TRANSMISSION  
4. 8Y-7199 [1] PLATE  
5. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
8. 7X-6324 [1] CLAMP-COLUMN  
9. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
10. 6V-8227 M [1] NUT (M18X1.5-THD)  
11. 135-4566 [4] SHIM (0.5-MM THK)  
12. 153-9580 CY [1] STEERING WHEEL GP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28860696
 

159-4923: CONTROL GP-STEERING & XMSN

159-4923 CONTROL GP-STEERING & XMSN
S/N 4ZN16044-50156
POWER SHIFT, TILT
Type 2
AN ATTACHMENT
i01108004 SEBP2886
1594923 CONTROL GP-STEERING & XMSN Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8894 M [3] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
2. 117-7038 [1] STEERING COLUMN  
  149-0777 [1] KNOB  
  149-0782 [1] KIT-TILT LEVER  
  149-0783 [1] KIT-SHAFT  
  149-0784 [1] KIT-HOUSING  
  149-0785 [1] KIT-GAS SPRING  
3. 174-6649 C [1] CONTROL GP-TRANSMISSION  
4. 8Y-7199 [1] PLATE  
5. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
8. 7X-6324 [1] CLAMP-COLUMN  
9. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
10. 6V-8227 M [1] NUT (M18X1.5-THD)  
11. 135-4566 B [4] SHIM (0.5-MM THK)  
12. 153-9580 Y [1] STEERING WHEEL GP  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28860697
 

159-4924: CONTROL GP-STEERING & XMSN

159-4924 CONTROL GP-STEERING & XMSN
S/N 4ZN16044-50156
STATIONARY
Type 1
AN ATTACHMENT
i00968658 SEBP2886
1594924 CONTROL GP-STEERING & XMSN Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8894 M [3] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
2. 101-2902 [1] STEERING COLUMN AS  
  6V-8227 M [1] NUT (M18X1.5-THD)  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
  8T-8874 M [1] NUT-WELD (M5X0.8-THD)  
  9D-6621 [2] NUT-WELD (10-24-THD)  
3. 137-8899 [1] CONTROL GP-TRANSMISSION  
4. 8Y-7199 [1] PLATE  
5. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
8. 7X-6325 [1] CLAMP-COLUMN  
9. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
10. 153-9580 Y [1] STEERING WHEEL GP  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28860698
 

159-4924: CONTROL GP-STEERING & XMSN

159-4924 CONTROL GP-STEERING & XMSN
S/N 4ZN16044-50156
STATIONARY
Type 2
AN ATTACHMENT
i01164908 SEBP2886
1594924 CONTROL GP-STEERING & XMSN Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8894 M [3] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
2. 101-2902 [1] STEERING COLUMN AS  
  6V-8227 M [1] NUT (M18X1.5-THD)  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
  8T-8874 M [1] NUT-WELD (M5X0.8-THD)  
  9D-6621 [2] NUT-WELD (10-24-THD)  
3. 166-7501 C [1] CONTROL GP-TRANSMISSION  
4. 8Y-7199 [1] PLATE  
5. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
8. 7X-6325 [1] CLAMP-COLUMN  
9. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
10. 153-9580 Y [1] STEERING WHEEL GP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28860699
 

159-4925: CONTROL GP-STEERING & XMSN

159-4925 CONTROL GP-STEERING & XMSN
S/N 4ZN16044-17047
POWER SHIFT, STATIONARY
AN ATTACHMENT
i00985543 SEBP2886
1594925 CONTROL GP-STEERING & XMSN Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8894 M [3] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
2. 101-2902 [1] STEERING COLUMN AS  
  6V-8227 M [1] NUT (M18X1.5-THD)  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
  8T-8874 M [1] NUT-WELD (M5X0.8-THD)  
  9D-6621 [2] NUT-WELD (10-24-THD)  
3. 158-6209 [1] CONTROL GP-TRANSMISSION  
4. 8Y-7199 [1] PLATE  
5. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
8. 7X-6325 [1] CLAMP-COLUMN  
9. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
10. 153-9580 Y [1] STEERING WHEEL GP  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Backhoe Extendable Stick Control (Foot Operated)
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Four Lever Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Three Lever with Foot Swing Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Two Lever Control (Backhoe)(Standard Pattern) - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Two Lever Control (Backhoe)(Excavator Pattern)
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Three Lever with Auxiliary Lever Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Auxiliary Control (Foot Operated) - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Multipurpose Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Field Installation Of 151-2595 Kit Controls, Four Lever Ford Style{5063}
Field Installation Of 151-2595 Kit Controls, Four Lever Ford Style{5063}
Field Installation of the 126-5004 Valve Control Group , Excavator Style Controls{5063}
Field Installation of the 126-5004 Valve Control Group , Excavator Style Controls{5063}
Bracket Modification for Improved Control Groups{5063}
Bracket Modification for Improved Control Groups{5063}
Service Letter-NACD
Product Support Program For Replacing The Loader Control Bracket On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Loader Control Bracket On Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-Americas
Technical Information Bulletin
E-Stick Pedal Linkage Change
E-Stick Pedal Linkage Change
Identifying Backhoe Loaders with Foot-Operated Boom Swing Controls that are Referenced in Service Letter SEBE8639
Identifying Backhoe Loaders with Foot-Operated Boom Swing Controls that are Referenced in Service Letter SEBE8639
Specifications
Hydraulic Hand Control (Loader)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bank Valve (Loader Control)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Hydraulic Hand Control (Backhoe and Stabilizer)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bank Valve (Loader Control)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Service Magazine
New End Cover For Control Valve Group Can Be Used With Or Without Additional Hydraulic Circuits (Power Beyond) {5051}
1997/11/17
Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08
Improved Tilt Stem Smoothes Out Bucket Movement{5051}
1999/07/26
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22
An Improved Bucket Lever Will Increase Service Life {5063}
2001/10/15
The Revised Special Instruction, REHS0325 , "Bracket Modification for Improved Control Groups" Can Be Ordered {5063}
2003/05/12

Caterpillar Parts SIS Catalog 416C :

CONTROL GP-HYDRAULIC HAND
9R-9705 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1842 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1837 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1835 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1834 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
104-1966 CONTROL GP-HYDRAULIC HAND
CONSOLE GP-SIDE
104-3919 CONSOLE GP-SIDE
CONSOLE GP-REAR
104-3921 CONSOLE GP-REAR
CONTROL GP-HYDRAULIC LOCKOUT
106-2404 CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC PEDAL
106-6373 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-HYDRAULIC PEDAL
113-0720 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-STEERING & XMSN
159-4922 CONTROL GP-STEERING & XMSN
CONTROL GP-STEERING & XMSN
159-4923 CONTROL GP-STEERING & XMSN
CONTROL GP-STEERING & XMSN
159-4923 CONTROL GP-STEERING & XMSN
CONTROL GP-STEERING & XMSN
159-4924 CONTROL GP-STEERING & XMSN
CONTROL GP-STEERING & XMSN
159-4924 CONTROL GP-STEERING & XMSN

Truck sale:

Caterpillar 416C
 
Caterpillar 416C
- backhoe loader
FOLEY, INC.
Caterpillar 416C, bucket, Construction
4,063 
Caterpillar 416C, bucket, Construction
- bucket
FINNING CANADA
 
37,100 
Caterpillar 416C, backhoe loader, Construction


 
26,000 
Caterpillar 416C, backhoe loader, Construction


 
34,000 
Caterpillar 416C, backhoe loader, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.