169-9529 CYLINDER GP-SWING S/N 1WR8116-10736 101.6-MM (4-IN) BORE X 249-MM (9.8-IN) STROKE PART OF 154-5438 HYDRAULIC AR 416C

HYDRAULIC SYSTEM

CYLINDER GP

0. 169-9529 CYLINDER G
1. 123-5091 CYLINDER G
2. 183-5158 CYLINDER G

FUEL SYSTEM

DRAIN GP-FUEL

3. 120-9641 DRAIN GP-E

HYDRAULIC SYSTEM

DRIVE GP

4. 112-1826 DRIVE & MT

FILTER GP

5. 152-8308 FILTER GP-

FITTING GP

6. 132-8769 FITTING GP
7. 196-4191 FITTING GP

HYDRAULIC GP

8. 106-6253 HYDRAULIC
9. 112-1848 HYDRAULIC
0. INFORMATION

BACKHOE LOADER 416C BACKHOE LOADER 1WR
416C Backhoe Loader 1WR08116-10736 (MACHINE) POWERED BY 3054 Engine SEBP2888 416C 1WR (1996)

HYDRAULIC SYSTEM

CYLINDER GP

184-3709 CYLINDER GP-STICK

116-6861 CYLINDER GP-SWING

169-9529 CYLINDER GP-SWING

123-5091 CYLINDER GP-TILT

183-5158 CYLINDER GP-TILT

148-2301 LINES GP-COUPLER

#SEBP28880410

169-9529: CYLINDER GP-SWING

CYLINDER GP-SWING

169-9529 CYLINDER GP-SWING
S/N 1WR8116-10736
101.6-MM (4-IN) BORE X 249-MM (9.8-IN) STROKE
PART OF 154-5438 HYDRAULIC AR

i01104121 SEBP2888

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	116-6857	[1]	CYLINDER AS
1A.	9T-2883	[2]	BEARING
2.	169-6947	[1]	NUT (1-1/2-12-THD)
3.	6J-2797 J	[1]	RING-WEAR
4.	8C-9160 J	[1]	SEAL AS
5.	112-1773	[1]	PISTON
6.	175-7900 J	[1]	SEAL-O-RING
7.	168-2271 J	[1]	RING-BACKUP
8.	6E-5649	[1]	WASHER (1.25-MM THK)
9.	6E-5651	[1]	HEAD
10.	4T-5613 J	[1]	RING-WEAR
11.	308-1845 J	[1]	SEAL-WIPER
12.	421-4023 J	[1]	SEAL-U-CUP
13.	289-2935 J	[1]	SEAL AS-BUFFER
14.	125-7894	[1]	ROD AS
14A.	102-3582	[1]	WASHER (11X19.5X2.5-MM THK)
14B.	2Y-5821	[1]	RING
14C.	3N-5739	[1]	SPRING
14D.	6E-1478	[1]	PLUNGER
14E.	9R-9505	[2]	BUSHING

			AVAILABLE REPAIR KIT(S):
	380-9482 J	[1]	KIT-HYD CYLINDER SEAL
	J		KIT MARKED J SERVICES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP28880411

123-5091: CYLINDER GP-TILT

CYLINDER GP-TILT

123-5091 CYLINDER GP-TILT
S/N 1WR8116-10736
PART OF 154-5438 HYDRAULIC AR

i00202152 SEBP2888

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	183-5159	[1]	CYLINDER AS
1A.	9R-0153	[2]	BUSHING
2.	173-9779 M	[1]	BOLT (M24X3X80-MM)
3.	6V-8237	[1]	WASHER (26X44X4-MM THK)
4.	9T-2547	[1]	PISTON
5.	6J-1972 J	[1]	SEAL AS
6.	6J-5733 J	[1]	RING-WEAR
7.	1H-7339	[1]	SEAL-O-RING
8.	6J-5731 J	[1]	RING-BACKUP
9.	148-2593	[1]	HEAD
10.	114-2229	[1]	ROD AS
10A.	9R-0321	[2]	BUSHING
11.	4T-5613 J	[1]	RING-WEAR
12.	308-1845 J	[1]	SEAL-WIPER
13.	289-2946 J	[1]	SEAL-U-CUP
14.	289-2935 J	[1]	SEAL AS-BUFFER

			AVAILABLE REPAIR KIT(S):
	238-4462 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP28880412

183-5158: CYLINDER GP-TILT

CYLINDER GP-TILT

183-5158 CYLINDER GP-TILT
S/N 1WR9975-10736
76MM (2.99IN) BORE X 885MM (34.84IN) STROKE
PART OF 154-5438 HYDRAULIC AR

i01239549 SEBP2888

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	183-5159	[1]	CYLINDER AS
1A.	9R-0153	[2]	BUSHING
2.	173-9779 M	[1]	BOLT (M24X3X80-MM)
3.	6V-8237	[1]	WASHER (26X44X4-MM THK)
4.	9T-2547	[1]	PISTON
5.	6J-1972 J	[1]	SEAL AS
6.	6J-5733 J	[1]	RING-WEAR
7.	175-7896 J	[1]	SEAL-O-RING
8.	6J-5731 J	[1]	RING-BACKUP
9.	148-2593	[1]	HEAD
10.	114-2229	[1]	ROD AS
10A.	9R-0321	[2]	BUSHING
11.	308-1845 J	[1]	SEAL-WIPER
12.	289-2946 J	[1]	SEAL-U-CUP
13.	289-2935 J	[1]	SEAL AS-BUFFER
14.	4T-5613 J	[1]	RING-WEAR

			AVAILABLE REPAIR KIT(S):
	238-4462 J	[1]	KIT-SEAL (HYDRAULIC CYLINDER)
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP28880413

120-9641: DRAIN GP-ECOLOGY

DRAIN GP-ECOLOGY

120-9641 DRAIN GP-ECOLOGY
S/N 1WR8116-10736
AN ATTACHMENT

i00200938 SEBP2888

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2M-9780	[1]	SEAL-O-RING
2.	133-6337	[1]	PLUG-DRAIN
3.	134-8474	[1]	TUBE AS-DRAIN

#SEBP28880414

112-1826: DRIVE & MTG GP-PUMP

DRIVE & MTG GP-PUMP

112-1826 DRIVE & MTG GP-PUMP
S/N 1WR8116-10736
PART OF 154-5438 HYDRAULIC AR

i00200867 SEBP2888

1121826 DRIVE & MTG GP-PUMP Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-9405 M	[4]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
2.	9U-8886	[1]	RING-SEAL
3.	115-1918	[1]	PLATE
4.	117-3534	[1]	ADAPTER
5.	274-4555	[1]	HUB
6.	128-5596 Y	[1]	SHAFT GP-PUMP DRIVE
7.	175-7904	[1]	SEAL-O-RING
8.	8T-4122	[2]	WASHER-HARD (17X32X3.5-MM THK)
9.	8T-7338 M	[2]	BOLT (M16X2X45-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP28880415

152-8308: FILTER GP-OIL

FILTER GP-OIL

152-8308 FILTER GP-OIL
S/N 1WR8116-10736
PART OF 154-5438 HYDRAULIC AR
OPTIONAL FIELD REPLACEMENT ORDER 1-134-3014 FILTER AS-OIL

i00671460 SEBP2888

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	126-1817	[1]	FILTER-OIL (ULTRA HIGH EFFICIENCY)

#SEBP28880416

132-8769: FITTING GP-HYDRAULIC

FITTING GP-HYDRAULIC

132-8769 FITTING GP-HYDRAULIC -QUICK DISCONNECT
S/N 1WR8116-10736
AN ATTACHMENT

i00201053 SEBP2888

1328769 FITTING GP-HYDRAULIC Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	106-0406	[1]	FITTING (QUICK DISCONNECT, MALE)
2.	106-0401	[1]	FITTING (QUICK DISCONNECT, FEMALE)

#SEBP28880417

196-4191: FITTING GP-HYDRAULIC

FITTING GP-HYDRAULIC

196-4191 FITTING GP-HYDRAULIC -QUICK DISCONNECT
S/N 1WR8116-10736
AN ATTACHMENT

i01499956 SEBP2888

1964191 FITTING GP-HYDRAULIC Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3D-2824	[2]	SEAL-O-RING
2.	6V-0408	[2]	SEAL-BONDED
3.	195-6525	[1]	FITTING AS (QUICK DISCONNECT, FEMALE)
4.	195-6527	[1]	FITTING AS (QUICK DISCONNECT, MALE)
5.	196-4196	[2]	ADAPTER

	152-5717 F	[1]	CAP-DUST
	152-5718 F	[1]	CAP-DUST
	F		NOT SHOWN

#SEBP28880418

106-6253: HYDRAULIC AR

HYDRAULIC AR

106-6253 HYDRAULIC AR
S/N 1WR8116-10736
AN ATTACHMENT

i00990905 SEBP2888

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
6V-9830	[2]	CAP (ORFS)
106-6373 Y	[1]	CONTROL GP-HYDRAULIC PEDAL
119-4003 Y	[1]	CONVERSION GP-CONTROL VALVE
CY	[1]	LINES GP-HYDRAULIC
6V-8398	[2]	SEAL-O-RING
C		CHANGE FROM PREVIOUS TYPE
Y		SEPARATE ILLUSTRATION

#SEBP28880419

112-1848: HYDRAULIC AR

HYDRAULIC AR

112-1848 HYDRAULIC AR
S/N 1WR8116-10736
FIELD INSTALLATION, 3 BANK, PARALLEL LIFT
AN ATTACHMENT

i00202109 SEBP2888

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
134-4407 Y	[1]	CONTROL GP-HYDRAULIC HAND
112-1849 Y	[1]	CONVERSION GP-CONTROL VALVE
112-6403 Y	[1]	LINES GP-LOADER AUXILIARY
117-5671	[1]	BOOT
Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Operation and Maintenance Manual

Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Swing Frame and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Special Instruction

Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}
Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Service Letter-NACD

Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders

Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING CYLINDER ON CERTAIN 416C AND 416D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING CYLINDER ON CERTAIN 416C AND 416D BACKHOE LOADERS

Technical Information Bulletin

Tilt Cylinders May Form A Void During Some Applications
Tilt Cylinders May Form A Void During Some Applications

Interference Between The Lower E-Stick Pad Retaining Bolt And The Rod End Tube Assembly
Interference Between The Lower E-Stick Pad Retaining Bolt And The Rod End Tube Assembly

Improved Routing Of E-Stick Extension Cylinder Lines
Improved Routing Of E-Stick Extension Cylinder Lines

THE HEAD OF THE STICK CYLINDER MAY LOOSEN
THE HEAD OF THE STICK CYLINDER MAY LOOSEN

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Specifications

Boom Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Bucket Cylinder (Backhoe)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Bucket Cylinder (Extendable Stick)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stick Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Swing Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Pin Coupler Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Multipurpose Bucket Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Lift Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Tilt Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Information Release Memo

PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS

Service Letter-APD

Bench Test Procedures

Disassembly and Assembly

Bucket Tilt Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Bucket Tilt Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Loader Lift Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Multi-purpose Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Swing Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stabilizer Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Boom Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Sideshift Assembly
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stabilizer Cylinders (428B)
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Stick, Extendible Stick, Extendible Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Extendible Stick Cylinder & Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Service Magazine

Correction To Backhoe Loader C-Series Parts Manuals{7222,7567}
1997/07/28

Torque Increased For Piston Retaining Nut In Swing Cylinder Groups{5105,7562}
1997/08/25

Improvements To The Tubes (Lift Cylinder) Provides More Clearance For The Front Tires {5057}
1998/01/26

New Stabilizer Pads Are Wider{7222}
1998/03/09

Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08

Lubrication Of The Stabilizer Pad Pin On Backhoe Loaders {7528,7222,7581}
1999/01/25

Splined Pins For Backhoe Loaders {6506,6502}
1999/06/28

Special Instruction For Rebuilding The Backhoe Loader Pin Bores Is Now Available {6101,6104,6119,6501,6502,6503,6506,6508,6515,6518,6533,7054,7222}
1999/09/20

New Cylinders Use Piston To Stop Instead Of Piston Bolt {5106,5223,5458,5468,5457,5486}
1999/10/04

New Lock Valves for the Stabilizers Keep the Cylinder Head Tight {5057, 5067, 5468}
2000/06/05

A New Check Valve Reduces Voiding {5067, 5104}
2000/08/28

The Check Valve Has Been Relocated {5057, 5067, 5104}
2001/04/16

Correction to Disassembly and Assembly, SENR1209 for the Boom and Stick Cylinder {5456, 5458}
2001/05/07

Correction to Specifications Manual SENR1207-03 {5104}
2001/05/14

New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30

Correction to Testing and Adjusting, SENR1272 for the Loader Cycle Times {5457}
2001/07/02

Correction to Specifications, SENR1207 , "Stick Cylinder" {5458}
2001/10/01

Correction to Specifications, SENR1207 , "Stabilizer Cylinder" {5468}
2001/10/01

New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/07/30

Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30

New Stabilizer Pads Make Stabilizer Operation Quieter {5468, 7150, 7222}
2001/10/08

Correction to Service Manual, SENR1272 , "Operational Checks" {5102, 5104, 5105, 5456, 5457, 5486}
2001/11/05

Correction to Specifications , "Tilt Cylinder" {5104}
2002/04/08

New Hydraulic Tubes Are Used in the Quick Coupler Lines Gp {5057, 5133, 6129}
2003/05/12

Special Instruction, REHS1356, "Field Installation of the Caterpillar Cushion Swing System Is Available" {5057, 5105, 5454}
2002/11/25

Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09

New Swing Cylinders Improve Service Life {5105}
2005/03/21

Grease the Swing Frame and Maintain the Gap Between the Spacers and the Swing Frame {5105, 6506}
2005/04/25

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24

Caterpillar Parts SIS Catalog 416C :

116-6861 CYLINDER GP-SWING

184-3709 CYLINDER GP-STICK

169-2967 CYLINDER GP-STICK

109-7020 CYLINDER GP-STICK

173-1927 CYLINDER GP-STABILIZER

173-1926 CYLINDER GP-STABILIZER

152-1806 CYLINDER GP-STABILIZER

152-1796 CYLINDER GP-STABILIZER

123-5091 CYLINDER GP-TILT

183-5158 CYLINDER GP-TILT

120-9641 DRAIN GP-ECOLOGY

112-1826 DRIVE & MTG GP-PUMP

152-8308 FILTER GP-OIL

132-8769 FITTING GP-HYDRAULIC

196-4191 FITTING GP-HYDRAULIC

106-6253 HYDRAULIC AR

Truck sale:

Caterpillar 416C
- backhoe loader
FOLEY, INC.

4,063

Caterpillar 416C, bucket, Construction
- bucket
FINNING CANADA

37,100

Caterpillar 416C, backhoe loader, Construction

26,000

Caterpillar 416C, backhoe loader, Construction

34,000

Caterpillar 416C, backhoe loader, Construction