AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

130-4648 PLUG GP-CYLINDER BLOCK S/N 7BJ1-UP; 5HK81000-99999 PART OF 122-8805 ENGINE AR-PRIMARY 426C BACKHOE LOADER


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP
CYLINDER BLOCK GP
PULLEY GP
VALVE MECHANISM GP
LUBRICATION SYSTEM
FILLER GP-ENGINE OIL
PUMP GP-ENGINE OIL
COOLING SYSTEM
LINES GP-WATER

BACKHOE LOADER 426C BACKHOE LOADER 1ER
 426C Backhoe Loader Center Pivot, Single Tilt 1ER00864-00899 (MACHINE) POWERED BY 3054 Engine SEBP2891 426C 1ER   (1996)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
145-6685 CYLINDER BLOCK GP
CYLINDER BLOCK GP
145-6685 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-2884 CYLINDER BLOCK GP
CYLINDER BLOCK GP
209-5562 CYLINDER BLOCK GP
CYLINDER BLOCK GP
209-5562 CYLINDER BLOCK GP
CYLINDER BLOCK GP
209-5562 CYLINDER BLOCK GP
CYLINDER BLOCK GP
209-6725 CYLINDER BLOCK GP
130-4648 PLUG GP-CYLINDER BLOCK
141-0728 PLUG GP-ENGINE
PLUG GP-ENGINE
148-9686 PLUG GP-ENGINE
 

#SEBP28910070
 

130-4648: PLUG GP-CYLINDER BLOCK

130-4648 PLUG GP-CYLINDER BLOCK
S/N 7BJ1-UP; 5HK81000-99999
PART OF 122-8805 ENGINE AR-PRIMARY
i00501902 SEBP2891
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  069-1124 [2] PLUG  
 

#SEBP28910071
 

130-4647: PLUG GP-CYLINDER HEAD

130-4647 PLUG GP-CYLINDER HEAD
S/N 7BJ1-74537; 5HK81000-99999
PART OF 122-8805 ENGINE AR-PRIMARY
i00501901 SEBP2891
1304647 PLUG GP-CYLINDER HEAD Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 067-6044 [1] PLUG  
2. 067-6045 [1] WASHER (16.25X21.03X1.62-MM THK)  
 

#SEBP28910072
 

130-4647: PLUG GP-CYLINDER HEAD

130-4647 PLUG GP-CYLINDER HEAD
S/N 7BJ9039-UP
PART OF 122-8805 ENGINE AR-PRIMARY
i02216750 SEBP2891
1304647 PLUG GP-CYLINDER HEAD Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 067-6044 [1] PLUG  
2. 247-4928 C [1] WASHER (16.5X20.5X1.6-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP28910073
 

141-0728: PLUG GP-ENGINE

141-0728 PLUG GP-ENGINE
S/N 7BJ1-UP; 5HK81000-99999
PART OF 122-8805 ENGINE AR-PRIMARY
i01025823 SEBP2891
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2B-0858 [2] PLUG-PIPE  
    (ONE IS LOCATED IN THERMOSTAT HOUSING & THE OTHER IS LOCATED IN REAR FACE OF TIMING CASE)
 

#SEBP28910074
 

148-9686: PLUG GP-ENGINE

148-9686 PLUG GP-ENGINE
S/N 7BJ1-41218; 5HK81000-99999
PART OF 122-8805 ENGINE AR-PRIMARY
i01021857 SEBP2891
1489686 PLUG GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-8470 [4] PLUG  
2. 101-2987 [6] PLUG  
3. 126-8191 [8] STUD  
 

#SEBP28910075
 

6I-0500: PULLEY GP-CRANKSHAFT

6I-0500 PULLEY GP-CRANKSHAFT
S/N 7BJ1-UP; 5HK81000-99999
PART OF 122-8805 ENGINE AR-PRIMARY
i00389950 SEBP2891
6I0500 PULLEY GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0501 [1] BLOCK  
2. 6I-0502 [1] PULLEY  
3. 7W-4634 [3] BOLT (7/16-20X1.5-IN)  
 

#SEBP28910076
 

145-8471: VALVE MECHANISM GP

145-8471 VALVE MECHANISM GP
S/N 7BJ1-UP; 5HK81000-99999
PART OF 122-8805 ENGINE AR-PRIMARY
i01026132 SEBP2891
1458471 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 140-7392 [1] ROCKER ARM AS  
2. 006-8606 [2] RING-RETAINING  
3. 140-7391 [1] SHAFT AS-ROCKER ARM  
4. 067-6083 [2] PLUG-SHAFT END  
5. 209-0091 [4] LEVER AS (LH)  
    (EACH INCLUDES)
6. 209-0093 [1] BUSHING  
7. 209-0092 [4] LEVER AS (RH)  
    (EACH INCLUDES)
8. 209-0093 [1] BUSHING  
9. 6I-3717 [1] BOLT (10X0.5-IN)  
10. 6I-3718 [1] CONNECTION-FEED  
11. 6V-8183 [8] NUT-FULL (3/8-24-THD)  
12. 138-2054 [2] WASHER  
13. 067-6087 [2] SPRING-SHAFT  
14. 067-6088 [2] SPRING-SHAFT  
15. 185-1546 [8] SCREW  
16. 6I-1206 [4] BRACKET-SHAFT  
17. 195-7004 B [2] SHIM  
18. 129-3493 [1] FERRULE  
19. 464-6253 [8] LIFTER-VALVE  
20. 184-0983 M [3] NUT-HEX FLANGE (M12X1.75-THD)  
21. 6I-0234 [3] STUD  
22. 6I-0235 [1] BOLT (M12X1.75X50-MM)  
23. 067-6095 [8] ROD  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP28910077
 

120-8469: GAUGE GP-OIL LEVEL & FILLER

120-8469 GAUGE GP-OIL LEVEL & FILLER -WITH FILTER
S/N 7WN939-1099; 1ER864-899
PART OF 143-1311, 154-5384 INSTALLATION AR-ENGINE
ALSO AN ATTACHMENT
i00555209 SEBP2891
1208469 GAUGE GP-OIL LEVEL & FILLER Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-1289 [1] TUBE AS  
2. 121-1288 [1] GAUGE-OIL LEVEL (DIPSTICK)  
3. 136-3608 [1] CAP AS (ENGINE OIL FILLER)  
  124-0506 [1] SEAL  
4. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
5. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
6. 130-6001 [1] BODY AS  
  133-5512 [1] NUT  
7. 9M-0164 [2] CLAMP-HOSE  
8. 120-8717 [1] HOSE  
9. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
10. 120-8718 [1] BRACKET  
11. 7W-2326 [1] FILTER AS-ENGINE OIL  
12. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
13. 6I-1497 [1] SEAL  
14. 8T-4138 M [4] BOLT (M6X1X20-MM)  
15. 134-3987 [2] CLIP (LOOP)  
  M   METRIC PART
 

#SEBP28910078
 

145-8636: PUMP GP-ENGINE OIL

145-8636 PUMP GP-ENGINE OIL
S/N 7BJ1-UP; 5HK81000-99999
PART OF 122-8805 ENGINE AR-PRIMARY
i01026141 SEBP2891
1458636 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0254 M [3] BOLT (M8X1.25X30-MM)  
2. 6I-0255 [1] GEAR AS (20-TEETH)  
3. 067-6927 [1] BUSHING-TERMINAL  
4. 6I-0256 [1] WASHER  
5. 6I-0257 [1] PIPE  
6. 6I-0258 [2] SEAL  
7. 6I-0259 [1] FLANGE  
8. 6I-0260 M [2] BOLT (M8X1.25X25-MM)  
9. 6I-0912 [1] PUMP AS-ENGINE OIL  
10. 067-6928 [1] CLIP  
11. 127-3294 [1] SHAFT  
12. 8N-7998 [1] DOWEL  
13. 189-6350 [1] HOUSING AS  
14. 173-0126 [1] SPRING  
15. 7W-4648 [1] SEAT-SPRING  
16. 6I-0787 [1] RING-RETAINING  
17. 7W-4782 [1] PLUNGER  
18. 101-3415 [3] BOLT  
19. 6I-0650 M [1] BOLT (M10X1.5X65-MM)  
  M   METRIC PART
 

#SEBP28910079
 

146-0001: CONNECTION GP-WATER

146-0001 CONNECTION GP-WATER
S/N 7BJ1-UP; 5HK81000-99999
PART OF 122-8805 ENGINE AR-PRIMARY
i01026156 SEBP2891
1460001 CONNECTION GP-WATER Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-9897 [1] CONNECTION AS  
2. 140-7515 [1] SEAL-O-RING (REGULATOR)  
3. 141-6188 [1] SEAL (HOUSING, REGULATOR)  
4. 162-0236 [1] RING  
5. 220-2748 [1] REGULATOR-WATER TEMPERATURE  
6. 6I-0260 M [4] BOLT (M8X1.25X25-MM)  
  M   METRIC PART
 

Information:

Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
3054 Engine
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3054 Engine
Cylinder Liner Projection - Inspect
3054 Engine
Cylinder Block - Inspect
3054 Engine
Disassembly and Assembly
Bearing Clearance - Check
3054 Engine for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3054 Engine for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3054 Engine for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3054 Engine for Caterpillar Built Machines
Cylinder Liner - Remove
3054 Engine for Caterpillar Built Machines
Cylinder Liner - Install
3054 Engine for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3054 Engine for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 426C :

PISTON & ROD GP
145-6690 PISTON & ROD GP
PAN GP-OIL
140-8175 PAN GP-OIL
PAN GP-OIL
140-8175 PAN GP-OIL
PAN GP-OIL
140-8175 PAN GP-OIL
PAN GP-OIL
140-8175 PAN GP-OIL
PAN GP-OIL
140-8175 PAN GP-OIL
PAN GP-OIL
140-8175 PAN GP-OIL
MOUNTING GP-STARTING MOTOR
130-4654 MOUNTING GP-STARTING MOTOR
PLUG GP-CYLINDER HEAD
130-4647 PLUG GP-CYLINDER HEAD
PLUG GP-CYLINDER HEAD
130-4647 PLUG GP-CYLINDER HEAD
141-0728 PLUG GP-ENGINE
PLUG GP-ENGINE
148-9686 PLUG GP-ENGINE
PULLEY GP-CRANKSHAFT
6I-0500 PULLEY GP-CRANKSHAFT
VALVE MECHANISM GP
145-8471 VALVE MECHANISM GP
GAUGE GP-OIL LEVEL & FILLER
120-8469 GAUGE GP-OIL LEVEL & FILLER
PUMP GP-ENGINE OIL
145-8636 PUMP GP-ENGINE OIL

Truck sale:

Caterpillar 426C
 
Caterpillar 426C
- backhoe loader
TRACTOR & EQUIPMENT CO.
 
35.900 
Caterpillar 426C, baggerlader, Bau-Und Bergbauausrüstung


Caterpillar 426C, Construction
22,500 
Caterpillar 426C, Construction
- backhoe loader
GREGORY POOLE EQUIPMENT CO.
 
On Request 
Caterpillar 426C, Construction
- backhoe loader
WESTERN STATES EQUIPMENT
Caterpillar 426C, Construction
28,000 
Caterpillar 426C, Construction
- backhoe loader
BLANCHARD MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.