AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

178-3713 CYLINDER GP-COUPLER S/N 1MR956-1179; 1YR1517-2191 50.8-MM (2-IN) BORE X 80.5-MM (3.17-IN) STROKE PART OF 122-6404 CYLINDER & MTG GP-COUPLER AN ATTACHMENT 426C


HYDRAULIC SYSTEM
CYLINDER GP

BACKHOE LOADER 426C BACKHOE LOADER 1MR
 426C Backhoe Loader Center Pivot, Parallel Lift 1MR00956-01179 (MACHINE) POWERED BY 3054 Engine SEBP2892 426C 1MR   (1996)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BACKHOE BUCKET
6E-3692 CYLINDER GP-BACKHOE BUCKET
CYLINDER GP-BOOM
153-5737 CYLINDER GP-BOOM
CYLINDER GP-COUPLER
178-3713 CYLINDER GP-COUPLER
CYLINDER GP-COUPLER
9T-8823 CYLINDER GP-COUPLER
159-8167 CYLINDER GP-EXTENDABLE STICK
CYLINDER GP-EXTENDABLE STICK
164-7178 CYLINDER GP-EXTENDABLE STICK
 

#SEBP28920330
 

178-3713: CYLINDER GP-COUPLER

178-3713 CYLINDER GP-COUPLER
S/N 1MR956-1179; 1YR1517-2191
50.8-MM (2-IN) BORE X 80.5-MM (3.17-IN) STROKE
PART OF 122-6404 CYLINDER & MTG GP-COUPLER
AN ATTACHMENT
i01438120 SEBP2892
1783713 CYLINDER GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-3893 [2] ROD  
   
    AVAILABLE REPAIR KIT(S):
  180-9872 [1] KIT-SEAL (COUPLER CYLINDER)  
    (INCLUDES LOCKNUTS, TEFLON PISTON SEALS, PISTON O-RINGS, O-RING SEALS, BACKUP RINGS,
    SQUARE WIRE RETAINERS, WIPER SEAL, INSTALLATION RING & U-CUP SEALS)
 

#SEBP28920331
 

9T-8823: CYLINDER GP-COUPLER

9T-8823 CYLINDER GP-COUPLER
S/N 1MR956-1179; 1YR1517-2191
51-MM (2-IN) BORE X 158-MM (6-IN) STROKE
PART OF 122-6404 CYLINDER & MTG GP-COUPLER
AN ATTACHMENT
i00195633 SEBP2892
9T8823 CYLINDER GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-5394 [2] ROD-PISTON  
   
    AVAILABLE REPAIR KIT(S):
  9T-0418 [1] KIT-SEAL  
    (INCLUDES LOCK RINGS, O-RINGS, WIPERS, BACKUP WASHERS, LOCKNUTS, SLOTTED NUTS, SPRING PINS & U-CUPS)
 

#SEBP28920332
 

159-8167: CYLINDER GP-EXTENDABLE STICK

159-8167 CYLINDER GP-EXTENDABLE STICK
S/N 1MR956-1179; 1YR1517-2191
PART OF 159-5032 STICK GP-EXTENDABLE
AN ATTACHMENT
i01103005 SEBP2892
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  164-7178 Y [1] CYLINDER GP-EXTENDABLE STICK  
  162-2352 Y [1] LINES GP-EXTENDABLE STICK  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28920333
 

164-7178: CYLINDER GP-EXTENDABLE STICK

164-7178 CYLINDER GP-EXTENDABLE STICK
S/N 1MR956-1179; 1YR1517-2191
76.2-MM (3-IN) BORE X 1219-MM (48-IN) STROKE
PART OF 159-8167 CYLINDER GP-EXTENDABLE STICK
AN ATTACHMENT
i01005975 SEBP2892
1647178 CYLINDER GP-EXTENDABLE STICK Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-7179 [1] CYLINDER AS  
  9T-2969 [1] BOSS  
2. 173-9779 M [1] BOLT (M24X3X80-MM)  
3. 6V-8237 [1] WASHER (26X44X4-MM THK)  
4. 9T-2212 [1] PISTON  
5. 175-7896 [1] SEAL-O-RING  
6. 6J-5731 [1] RING-BACKUP  
7. 6E-0122 [1] HEAD  
8. 165-5180 [1] ROD AS  
9. 9X-7337 [1] SEAL AS  
10. 6J-5733 [1] RING-WEAR  
11. 167-2186 [1] SEAL AS-BUFFER  
12. 167-2294 [1] SEAL-U-CUP  
13. 167-2450 [1] SEAL-WIPER  
14. 4T-6780 [1] RING-WEAR  
  M   METRIC PART
 

#SEBP28920334
 

123-5087: CYLINDER GP-LIFT

123-5087 CYLINDER GP-LIFT
S/N 1MR956-1179; 1YR1517-2191
PART OF 154-5440 HYDRAULIC AR
i00202150 SEBP2892
1235087 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-2108 [1] CYLINDER AS  
  7J-9903 [1] BOSS  
  9R-0153 [2] BUSHING  
2. 173-9683 M [1] BOLT (M30X3.5X90-MM)  
3. 3S-7023 [1] WASHER (34X57X6-MM THK)  
4. 4T-8054 J [1] SEAL AS  
5. 7J-9885 J [1] RING-WEAR  
6. 9T-9040 [1] PISTON  
7. 175-7898 J [1] SEAL-O-RING  
8. 4J-9224 J [1] RING-BACKUP  
9. 6E-4974 [1] HEAD  
10. 119-2110 [1] ROD AS  
  9R-0321 [2] BUSHING  
11. 308-1845 J [1] SEAL-WIPER  
12. 356-8331 J [1] SEAL-U-CUP  
13. 289-2935 J [1] SEAL AS-BUFFER  
14. 4T-5613 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  376-9011 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP28920335
 

185-1839: CYLINDER GP-MULTIPURPOSE BUKT

185-1839 CYLINDER GP-MULTIPURPOSE BUKT
S/N 1MR956-1179; 1YR1517-2191
76.2-MM (3-IN) BORE X 260-MM (10.24-IN) STROKE
PART OF 124-0486, 124-0487, 124-0488, 124-0489, 185-6705, 185-6706 BUCKET AR-MULTIPURPOSE
FIELD REPLACEMENT FOR @@@@@ 9T-4006@@@@@
AN ATTACHMENT
i01422255 SEBP2892
1851839 CYLINDER GP-MULTIPURPOSE BUKT Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-0122 [1] HEAD  
2. 9T-2212 [1] PISTON  
3. 9T-4008 [1] ROD AS  
3A. 9T-4007 [2] BEARING  
4. 9T-4009 [1] CYLINDER AS  
5. 167-2186 J [1] SEAL AS-BUFFER  
6. 167-2294 J [1] SEAL-U-CUP  
7. 1H-7339 J [1] SEAL-O-RING  
8. 226-8202 J [1] SEAL-WIPER  
9. 4T-6780 J [1] RING-WEAR  
10. 5P-8250 [1] WASHER (28X49X5-MM THK)  
11. 6F-7037 [1] BOLT (1-14X3.25-IN)  
12. 6J-1972 J [1] SEAL AS  
13. 6J-5733 J [1] RING-WEAR  
14. 8J-2574 J [1] RING-BACKUP  
   
    AVAILABLE REPAIR KIT(S):
  235-0354 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP28920336
 

9T-4006: CYLINDER GP-MULTIPURPOSE BUKT

9T-4006 CYLINDER GP-MULTIPURPOSE BUKT
S/N 1MR956-1179; 1YR1517-2191
76.2-MM (3-IN) BORE X 260-MM (10.24-IN) STROKE
PART OF 124-0486, 124-0487, 124-0488, 124-0489 BUCKET AR-MULTIPURPOSE
FIELD REPLACEMENT ORDER @@@@@185-1839@@@@@
AN ATTACHMENT
i00200457 SEBP2892
9T4006 CYLINDER GP-MULTIPURPOSE BUKT Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-4008 [1] ROD AS  
2. 9T-4007 [2] BEARING  
3. 167-2450 J [1] SEAL-WIPER  
4. 167-2294 J [1] SEAL-U-CUP  
5. 167-2186 J [1] SEAL AS-BUFFER  
6. 4T-6780 J [1] RING-WEAR  
7. 9T-2074 [1] HEAD  
8. 8J-2574 J [1] RING-BACKUP  
9. 1H-7339 [1] SEAL-O-RING  
10. 9T-4009 [1] CYLINDER AS  
11. 6J-1972 J [1] SEAL AS  
12. 5P-8250 [1] WASHER (28X49X5-MM THK)  
13. 6F-7037 [1] BOLT (1-14X3.25-IN)  
14. 9T-2212 [1] PISTON  
15. 6J-5733 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  185-6583 J [1] KIT-SEAL  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP28920337
 

131-1846: CYLINDER GP-STABILIZER

131-1846 CYLINDER GP-STABILIZER
S/N 1MR957-959; 1YR1522-1556
101.6-MM (4-IN) BORE X 541-MM (21.3-IN) STROKE
PART OF 154-5440 HYDRAULIC AR
i00201042 SEBP2892
1311846 CYLINDER GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-1850 [1] CYLINDER AS  
  7J-9903 [1] BOSS  
2. 9R-0321 [2] BUSHING  
3. 4K-0684 [1] WASHER-HARD (34X55X6-MM THK)  
4. 6J-2797 [1] RING-WEAR  
5. 5J-5402 [1] SEAL AS  
6. 4T-7354 [1] PISTON  
7. 9X-4611 [1] SEAL-O-RING  
8. 2K-6830 [1] RING-BACKUP  
9. 9T-6388 [1] HEAD  
10. 131-1856 [1] ROD AS  
11. 9R-0321 [2] BUSHING  
12. 9X-3568 [1] SEAL AS  
13. 4T-6126 [1] SEAL-U-CUP  
14. 9X-3567 [1] SEAL-LIP TYPE  
15. 8D-4069 [1] RING  
16. 7F-6112 [1] BOLT (1-1/4-12X3-IN)  
17. 4T-6128 [1] RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP28920338
 

131-1847: CYLINDER GP-STABILIZER

131-1847 CYLINDER GP-STABILIZER
S/N 1MR957-959; 1YR1522-1556
101.6-MM (4-IN) BORE X 541-MM (21.3-IN) STROKE
PART OF 154-5440 HYDRAULIC AR
i00201043 SEBP2892
1311847 CYLINDER GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-1851 [1] CYLINDER AS  
2. 9R-0321 [2] BUSHING  
  7J-9903 [1] BOSS  
3. 4K-0684 [1] WASHER-HARD (34X55X6-MM THK)  
4. 6J-2797 [1] RING-WEAR  
5. 5J-5402 [1] SEAL AS  
6. 4T-7354 [1] PISTON  
7. 9X-4611 [1] SEAL-O-RING  
8. 2K-6830 [1] RING-BACKUP  
9. 9T-6388 [1] HEAD  
10. 131-1856 [1] ROD AS  
11. 9R-0321 [2] BUSHING  
12. 9X-3568 [1] SEAL AS  
13. 4T-6126 [1] SEAL-U-CUP  
14. 9X-3567 [1] SEAL-LIP TYPE  
15. 8D-4069 [1] RING  
16. 7F-6112 [1] BOLT (1-1/4-12X3-IN)  
17. 4T-6128 [1] RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP28920339
 

152-1796: CYLINDER GP-STABILIZER

152-1796 CYLINDER GP-STABILIZER -RH
S/N 1MR956-1179; 1YR1517-2191
101.6-MM (4-IN) BORE X 541-MM (21.3-IN) STROKE
PART OF 154-5440 HYDRAULIC AR
i00976435 SEBP2892
1521796 CYLINDER GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your 426C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-1851 [1] CYLINDER AS  
2. 7F-6112 [1] BOLT (1-1/4-12X3-IN)  
3. 4K-0684 [1] WASHER-HARD (34X55X6-MM THK)  
4. 6J-2797 [1] RING-WEAR  
5. 5J-5402 [1] SEAL AS  
6. 4T-7354 [1] PISTON  
7. 9X-4611 [1] SEAL-O-RING  
8. 168-2271 [1] RING-BACKUP  
9. 152-1863 [1] HEAD  
10. 131-1856 [1] ROD AS  
  9R-0321 [2] BUSHING  
11. 4T-6128 [1] RING  
12. 150-6744 [1] SEAL-BUFFER (26-PIN)  
13. 4T-6126 [1] SEAL-U-CUP  
14. 150-6745 [1] SEAL-LIP TYPE  
15. 6V-6718 M [1] SCREW-SELF-TAPPING (8-32X0.25-IN)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Operation and Maintenance Manual
Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Swing Frame and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}
Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Field Installation of the Caterpillar Cushion Swing System{5057, 5105, 5454}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-Australia
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-CFEL
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-CSARL
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-Americas
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Technical Information Bulletin
Tilt Cylinders May Form A Void During Some Applications
Tilt Cylinders May Form A Void During Some Applications
Interference Between The Lower E-Stick Pad Retaining Bolt And The Rod End Tube Assembly
Interference Between The Lower E-Stick Pad Retaining Bolt And The Rod End Tube Assembly
Improved Routing Of E-Stick Extension Cylinder Lines
Improved Routing Of E-Stick Extension Cylinder Lines
THE HEAD OF THE STICK CYLINDER MAY LOOSEN
THE HEAD OF THE STICK CYLINDER MAY LOOSEN
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Boom Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bucket Cylinder (Backhoe)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bucket Cylinder (Extendable Stick)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stick Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Swing Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Pin Coupler Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Multipurpose Bucket Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Lift Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Tilt Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-Asia
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
Service Letter-APD
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing Failed Stabilizer Cylinders On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Piston Retaining Nut On The Swing Cylinders Of Certain 416C, 426C And 436C Backhoe Loaders
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Tilt Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Bucket Tilt Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Loader Lift Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Multi-purpose Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Swing Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stabilizer Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Boom Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Sideshift Assembly
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stabilizer Cylinders (428B)
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stick, Extendible Stick, Extendible Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Extendible Stick Cylinder &amp; Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Service Magazine
New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11
Correction To Backhoe Loader C-Series Parts Manuals{7222,7567}
1997/07/28
Torque Increased For Piston Retaining Nut In Swing Cylinder Groups{5105,7562}
1997/08/25
New Stabilizer Pads Are Wider{7222}
1998/03/09
Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08
Lubrication Of The Stabilizer Pad Pin On Backhoe Loaders {7528,7222,7581}
1999/01/25
Splined Pins For Backhoe Loaders {6506,6502}
1999/06/28
Special Instruction For Rebuilding The Backhoe Loader Pin Bores Is Now Available {6101,6104,6119,6501,6502,6503,6506,6508,6515,6518,6533,7054,7222}
1999/09/20
New Cylinders Use Piston To Stop Instead Of Piston Bolt {5106,5223,5458,5468,5457,5486}
1999/10/04
New Lock Valves for the Stabilizers Keep the Cylinder Head Tight {5057, 5067, 5468}
2000/06/05
A New Check Valve Reduces Voiding {5067, 5104}
2000/08/28
The Check Valve Has Been Relocated {5057, 5067, 5104}
2001/04/16
Correction to Disassembly and Assembly, SENR1209 for the Boom and Stick Cylinder {5456, 5458}
2001/05/07
Correction to Specifications Manual SENR1207-03 {5104}
2001/05/14
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30
Correction to Testing and Adjusting, SENR1272 for the Loader Cycle Times {5457}
2001/07/02
Correction to Specifications, SENR1207 , "Stick Cylinder" {5458}
2001/10/01
Correction to Specifications, SENR1207 , "Stabilizer Cylinder" {5468}
2001/10/01
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/07/30
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
New Stabilizer Pads Make Stabilizer Operation Quieter {5468, 7150, 7222}
2001/10/08
Correction to Service Manual, SENR1272 , "Operational Checks" {5102, 5104, 5105, 5456, 5457, 5486}
2001/11/05
Correction to Specifications , "Tilt Cylinder" {5104}
2002/04/08
New Hydraulic Tubes Are Used in the Quick Coupler Lines Gp {5057, 5133, 6129}
2003/05/12
Special Instruction, REHS1356, "Field Installation of the Caterpillar Cushion Swing System Is Available" {5057, 5105, 5454}
2002/11/25
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
New Swing Cylinders Improve Service Life {5105}
2004/11/08
Grease the Swing Frame and Maintain the Gap Between the Spacers and the Swing Frame {5105, 6506}
2005/04/25
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24

Caterpillar Parts SIS Catalog 426C :

CYLINDER GP-BOOM
153-5737 CYLINDER GP-BOOM
CYLINDER GP-BACKHOE BUCKET
6E-3692 CYLINDER GP-BACKHOE BUCKET
CYLINDER GP-BACKHOE BUCKET
126-8316 CYLINDER GP-BACKHOE BUCKET
CYLINDER & MTG GP-COUPLER
122-6404 CYLINDER & MTG GP-COUPLER
CYLINDER & MTG GP-COUPLER
122-6404 CYLINDER & MTG GP-COUPLER
163-9205 CONVERSION GP-LOAD CONTROL
CONVERSION GP-CONTROL VALVE
119-4004 CONVERSION GP-CONTROL VALVE
CONVERSION GP-CONTROL VALVE
119-4003 CONVERSION GP-CONTROL VALVE
CYLINDER GP-COUPLER
9T-8823 CYLINDER GP-COUPLER
159-8167 CYLINDER GP-EXTENDABLE STICK
CYLINDER GP-EXTENDABLE STICK
164-7178 CYLINDER GP-EXTENDABLE STICK
CYLINDER GP-LIFT
123-5087 CYLINDER GP-LIFT
CYLINDER GP-MULTIPURPOSE BUKT
185-1839 CYLINDER GP-MULTIPURPOSE BUKT
CYLINDER GP-MULTIPURPOSE BUKT
9T-4006 CYLINDER GP-MULTIPURPOSE BUKT
CYLINDER GP-STABILIZER
131-1846 CYLINDER GP-STABILIZER
CYLINDER GP-STABILIZER
131-1847 CYLINDER GP-STABILIZER

Truck sale:

Caterpillar 426C
 
Caterpillar 426C
- backhoe loader
TRACTOR & EQUIPMENT CO.
 
35.900 
Caterpillar 426C, baggerlader, Bau-Und Bergbauausrüstung


Caterpillar 426C, Construction
22,500 
Caterpillar 426C, Construction
- backhoe loader
GREGORY POOLE EQUIPMENT CO.
 
On Request 
Caterpillar 426C, Construction
- backhoe loader
WESTERN STATES EQUIPMENT
Caterpillar 426C, Construction
28,000 
Caterpillar 426C, Construction
- backhoe loader
BLANCHARD MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.