AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

160-9795 PUMP GP-FUEL INJECTION S/N 7BJ1-UP; 5HK81000-99999 PART OF 160-9796 PUMP GP-FUEL INJECTION 436C


FUEL SYSTEM
PUMP GP-FUEL INJECTION
SEPARATOR GP-WATER
TANK GP-FUEL
BASIC ENGINE
PULLEY GP

BACKHOE LOADER 436C BACKHOE LOADER 1FR
 436C Backhoe Loader Center Pivot, Single Tilt 1FR01416-01421 (MACHINE) POWERED BY 3054 Engine SEBP2894 436C 1FR   (1996)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
160-9795 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
160-9796 PUMP GP-FUEL INJECTION
 

#SEBP28940100
 

160-9795: PUMP GP-FUEL INJECTION

160-9795 PUMP GP-FUEL INJECTION
S/N 7BJ1-UP; 5HK81000-99999
PART OF 160-9796 PUMP GP-FUEL INJECTION
i02335471 SEBP2894
1609795 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 161-2161 [1] SEAL-O-RING  
2. 137-6396 [1] LOCKNUT  
3. 192-9155 [1] CONTROL AS-FUEL RATIO  
3A. 8D-5294 A [2] RING  
3B. 116-8645 A [1] NUT  
   
    AVAILABLE REPAIR KIT(S):
  101-3897 [1] KIT-SOLENOID (SHUTOFF)  
  A   NOT PART OF THIS GROUP
 

#SEBP28940101
 

160-9796: PUMP GP-FUEL INJECTION

160-9796 PUMP GP-FUEL INJECTION
S/N 7BJ1-UP; 5HK81000-99999
PART OF 122-8806 ENGINE AR-PRIMARY
i01039745 SEBP2894
1609796 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
2. 124-3714 [3] BOLT  
3. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
4. 102-9908 [1] BRACKET  
6. 107-2348 [2] CLIP  
7. 140-8713 [2] CLIP  
8. 140-8714 [1] CLIP  
9. 124-3713 [1] CONNECTION  
10. 033-7625 [1] ELBOW  
11. 067-6265 [1] FITTING-BRASS  
12. 067-6264 [1] FITTING-FLARED  
13. 154-6016 [1] GEAR-PUMP (56-TEETH)  
15. 154-8055 [1] HOSE  
16. 148-7108 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
17. 148-7110 [1] HOLDER  
18. 148-7111 [1] NOZZLE  
20. 140-8719 [1] LINE-LEAKOFF  
21. 5P-6627 D LOCKWIRE (1-M)  
22. 6I-0291 M [3] NUT (M8X1.25-THD)  
23. 6I-0594 M [1] NUT (M10X1.5-THD)  
24. 160-9795 Y [1] PUMP GP-FUEL INJECTION  
25. 067-7006 [1] SEAL  
27. 114-2573 [1] SLEEVE  
28. 101-3877 [3] STUD (M8X1.25X37-MM)  
29. 102-9909 [1] STUD (M10X1.5X25-MM)  
30. 169-5326 [1] SWITCH-TEMPERATURE  
31. 186-5002 [1] TUBE AS  
33. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
34. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
35. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
36. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
37. 204-7853 [8] WASHER  
38. 140-8718 [4] WASHER  
   
  161-2161 F [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  101-3897 [1] KIT-SOLENOID (SHUTOFF)  
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP28940102
 

7E-4636: SEPARATOR GP-WATER

7E-4636 SEPARATOR GP-WATER
S/N 8TN925-1315; 1FR1416-1421
PART OF 143-1311, 154-5384 INSTALLATION AR-ENGINE
ALSO AN ATTACHMENT
i00683882 SEBP2894
7E4636 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7092 Y [1] FILTER GP-WATER SEP & FUEL  
2. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
3. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
4. 130-7964 [1] TUBE AS  
5. 127-8167 [2] CLIP  
6. 9R-2603 [1] TUBE AS  
7. 4H-2494 [3] SLEEVE-FITTING  
8. 033-7849 [2] PLUG  
9. 032-8100 [2] WASHER (0.531X0.718X0.064-IN THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28940103
 

106-1379: TANK GP-FUEL

106-1379 TANK GP-FUEL
S/N 8TN925-1315; 1FR1416-1421
PART OF 154-5489, 154-5490 CHASSIS AR
i00679094 SEBP2894
1061379 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6442 BE HOSE (157CM)  
2. 159-1878 [1] TANK AS  
  7X-2644 F [1] CAP  
2A. 106-8020 [1] GASKET  
2B. 118-6848 [1] PLATE  
2C. 123-4950 M [8] SCREW-PAN HEAD (M6X1X16-MM)  
3. 1P-4278 [4] CLAMP-HOSE  
4. 9R-7240 [1] GASKET  
5. 116-4808 [1] TUBE  
6. 118-6846 [1] TREAD  
7. 118-6847 [1] STEP AS  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
8. 123-4950 M [2] SCREW-PAN HEAD (M6X1X16-MM)  
9. 128-2875 [1] SENDER AS-FUEL LEVEL  
  9X-8491 [2] NUT (10-32-THD)  
  9X-8862 [2] LOCKWASHER  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  187-8936 [1] SENDER AS-FUEL LEVEL  
10. 149-7678 [1] TUBE AS  
11. 149-7679 [1] TUBE AS  
12. 149-7681 [1] PLATE AS  
  8T-3612 M [3] NUT-WELD (M8X1.25-THD)  
13. 2B-2404 [2] CLIP  
14. 5P-4116 [7] WASHER-HARD (8.8X20.5X2-MM THK)  
15. 6K-5967 [1] CLIP  
16. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
18. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
19. 8T-4189 M [7] BOLT (M8X1.25X20-MM)  
20. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
21. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
22. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP28940104
 

106-1379: TANK GP-FUEL

106-1379 TANK GP-FUEL
S/N 8TN1231-1315; 1FR1416-1421
PART OF 154-5489, 154-5490 CHASSIS AR
i01156213 SEBP2894
1061379 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6442 E HOSE (59-CM)  
2. 1P-4278 [4] CLAMP-HOSE  
3. 9R-7240 [1] GASKET  
4. 116-4808 [1] TUBE  
5. 118-6846 [1] TREAD  
6. 128-2875 [1] SENDER AS-FUEL LEVEL  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  187-8936 [1] SENDER AS-FUEL LEVEL  
  9X-8491 [2] NUT (10-32-THD)  
  9X-8862 [2] LOCKWASHER  
7. 149-7678 [1] TUBE AS  
8. 149-7679 [1] TUBE AS  
9. 149-7681 [1] PLATE AS  
  8T-3612 M [3] NUT-WELD (M8X1.25-THD)  
10. 164-3876 C [1] STEP AS  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
11. 195-5642 Y [1] TANK GP-FUEL  
12. 123-4950 M [2] SCREW-PAN HEAD (M6X1X16-MM)  
13. 2B-2404 [2] CLIP  
14. 5P-4116 [7] WASHER-HARD (8.8X20.5X2-MM THK)  
15. 6K-5967 [1] CLIP  
16. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
18. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
19. 8T-4189 M [7] BOLT (M8X1.25X20-MM)  
20. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
21. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
22. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
24. 5P-6442 E HOSE (98-CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28940105
 

195-5642: TANK GP-FUEL

195-5642 TANK GP-FUEL
S/N 8TN1231-1315; 1FR1416-1421
PART OF 106-1379 TANK GP-FUEL
i01459414 SEBP2894
1955642 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 159-1878 [1] TANK AS  
1A. 7T-1099 [2] LINK  
1B. 7X-2644 [1] CAP  
1C. 106-8020 [1] GASKET  
1D. 118-6848 [1] PLATE  
1E. 118-6855 [1] PIPE AS-FUEL  
1F. 123-4950 M [8] SCREW-PAN HEAD (M6X1X16-MM)  
2. 148-8316 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8647 [1] CONNECTOR  
3. 148-8407 [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
  M   METRIC PART
 

#SEBP28940106
 

105-2812: ALTERNATOR GP-CHARGING

105-2812 ALTERNATOR GP-CHARGING
S/N 8TN925-1315; 1FR1416-1421
12 VOLT, 55 AMP
PART OF 121-5830, 137-3507 ALTERNATOR GP-CHARGING
AN ATTACHMENT
i00200492 SEBP2894
1052812 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [1] NUT (M6X1-THD)  
2. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 1H-3244 [1] LOCKWASHER  
4. 114-2863 [1] PULLEY-ALTERNATOR  
5. 114-2865 [1] FRAME AS-ALTERNATOR  
6. 114-2866 [1] ROTOR AS-ALTERNATOR  
7. 114-2867 [1] FRAME-ALTERNATOR  
8. 114-2868 [1] REGULATOR AS-ALTERNATOR  
9. 114-2869 [1] RECTIFIER AS-ALTERNATOR  
10. 114-2870 [1] HOLDER AS  
11. 114-2871 [1] COVER-ALTERNATOR  
12. 114-2872 [1] BUSHING-ALTERNATOR  
   
    AVAILABLE REPAIR KIT(S):
  114-2873 [1] KIT-ALTERNATOR BEARING  
    (INCLUDES BEARINGS, COVERS, PLATE, SCREW, & WASHER)
  114-2874 [1] KIT-ALTERNATOR HARDWARE  
    (INCLUDES NUTS & BOLTS)
  114-2875 [1] KIT-ALTERNATOR HARDWARE  
    (INCLUDES SCREWS)
  M   METRIC PART
 

#SEBP28940107
 

105-2813: ALTERNATOR GP-CHARGING

105-2813 ALTERNATOR GP-CHARGING
S/N 8TN925-1315; 1FR1416-1421
12 VOLT, 90 AMPERES
PART OF 121-5831, 121-5832 ALTERNATOR GP-CHARGING
AN ATTACHMENT
i00200493 SEBP2894
1052813 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-4457 [1] PULLEY-ALTERNATOR  
2. 113-4459 [1] FRAME AS-ALTERNATOR (TOP)  
3. 113-4460 [1] ROTOR AS-ALTERNATOR  
4. 113-4461 [1] FRAME AS-ALTERNATOR (BOTTOM)  
5. 113-4462 [1] REGULATOR AS-ALTERNATOR  
6. 113-4463 [1] RECTIFIER AS-ALTERNATOR  
7. 113-4464 [1] COVER-ALTERNATOR  
8. 113-4469 [4] BUSHING-ALTERNATOR  
9. 113-4470 [1] BUSHING-ALTERNATOR  
10. 5C-2890 M [1] NUT (M6X1-THD)  
11. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 1H-3244 [1] LOCKWASHER  
   
    AVAILABLE REPAIR KIT(S):
  113-4465 [1] KIT-ALTERNATOR BEARING  
    (INCLUDES COVERS, BEARINGS, WASHER, PLATE & SCREWS)
  113-4466 [1] KIT-REPAIR (ALTERNATOR BRUSHES)  
    (INCLUDES SEALS & HOLDER ASSEMBLY)
  113-4467 [1] KIT-ALTERNATOR TERMINAL  
    (INCLUDES NUTS, PLATE & SCREW)
  113-4468 [1] KIT-ALTERNATOR HARDWARE  
    (INCLUDES SCREWS)
  M   METRIC PART
 

#SEBP28940108
 

121-5830: ALTERNATOR GP-CHARGING

121-5830 ALTERNATOR GP-CHARGING
S/N 8TN925-1315; 1FR1416-1421
AN ATTACHMENT
i00200941 SEBP2894
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  105-2812 Y [1] ALTERNATOR GP-CHARGING  
   
  7W-3896 [1] V-BELT SET (INCLUDES 2-BELTS)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP28940109
 

121-5831: ALTERNATOR GP-CHARGING

121-5831 ALTERNATOR GP-CHARGING
S/N 8TN925-1315; 1FR1416-1421
AN ATTACHMENT
i00200942 SEBP2894
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  105-2813 Y [1] ALTERNATOR GP-CHARGING  
  7W-3896 [1] V-BELT SET (INCLUDES 2-BELTS)(INCLUDES 2 BELTS)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Operation and Maintenance Manual
Engine Valve Lash - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
O-Ring Seal Between Drive End Of Fuel Injection Pump And Back Side Of Front Housing
O-Ring Seal Between Drive End Of Fuel Injection Pump And Back Side Of Front Housing
Specifications
Fuel Injection Pump
3054 Engine
Fuel Injection Nozzles
3054 Engine
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Testing and Adjusting
Fuel Injection Nozzle - Test
3054 Engine
Disassembly and Assembly
Fuel Injection Nozzles - Remove - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Remove
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Install - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Install
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Remove - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Install - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Remove - Type 2 Engines and 7BJ Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Install - Type 2 Engines and 7BJ Engines
3054 Engine for Caterpillar Built Machines
Service Magazine
Proper Procedure For Servicing And Cleaning The Fuel Injection Pump{1251}
1996/10/21
Correct Service Interval For Water Separator{1251,1280}
1998/03/16
Use 136-3113 Timing Gauge To Time Engines With Bosch Pump {1251}
1998/08/17
Fuel Injection Pump Usage With Emissions Certified 3054 Engines In C-Series Backhoe Loaders {1251}
1998/09/07
O-Ring Seal For Fuel Injection Pump Groups Is Now Serviced{1251}
1998/10/26
Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
1998/11/09
Use 157-3719 Spanner For Removing And Installing Bosch Fuel Pumps {1251}
1999/03/08
Cold Start Advance Solenoid Available {1272,1250}
1999/05/17
Cold Start Advance Solenoid Available {1272,1250}
1999/08/02
Remanufactured Stanadyne Fuel Injection Pumps are now available for 3054 and 3056 Engines {1251}
2000/10/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Support for Fuel Injection Pumps {1251}
2008/07/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 436C :

FITTING GP-FUEL LINES
130-4646 FITTING GP-FUEL LINES
FILTER GP-WATER SEP & FUEL
130-7092 FILTER GP-WATER SEP & FUEL
FILTER GP-FUEL
138-3096 FILTER GP-FUEL
FILTER & LINES GP-FUEL
160-0148 FILTER & LINES GP-FUEL
FILTER & LINES GP-FUEL
160-0148 FILTER & LINES GP-FUEL
CONTROL GP-GOVERNOR
145-6847 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
104-2119 CONTROL GP-GOVERNOR
TURBOCHARGER GP
196-5477 TURBOCHARGER GP
PUMP GP-FUEL INJECTION
160-9796 PUMP GP-FUEL INJECTION
SEPARATOR GP-WATER
7E-4636 SEPARATOR GP-WATER
TANK GP-FUEL
106-1379 TANK GP-FUEL
TANK GP-FUEL
106-1379 TANK GP-FUEL
TANK GP-FUEL
195-5642 TANK GP-FUEL
ALTERNATOR GP-CHARGING
105-2812 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
105-2813 ALTERNATOR GP-CHARGING
121-5830 ALTERNATOR GP-CHARGING

Truck sale:

CATERPILLAR 436C 2000
 
CATERPILLAR 436C 2000
- BACKHOE LOADERS
WAGNER EQUIPMENT CO
United States
1999 CAT 436C
Call 
1999 CAT 436C

WORKING MACHINES S.A. DE C.V.
San Juan De Los Lagos, Jalisco, Mexico
2000 CAT 436C
USD $23,800 
2000 CAT 436C

Iron2sell.com
1992 CAT 436C
Call 
1992 CAT 436C

JERSEY RENTS INC
Bayville, New Jersey
1999 CAT 436C
USD $29,000 
1999 CAT 436C

Equipment Pros
Baltimore, Maryland
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.