192-0849 TRANSMISSION GP-POWER SHIFT -ALL WHEEL DRIVE S/N 8TN925-1315; 1FR1416-1421 PART OF 202-7432 TRANSMISSION & MOUNTING GP AN ATTACHMENT 436C

POWER TRAIN

TRANSMISSION GP

0. 192-0849 TRANSMISSI
1. 192-0849 TRANSMISSI

VALVE GP-RELIEF

2. 147-0209 VALVE GP-R

ELECTRICAL AND STARTING SYSTEM

VALVE GP

3. 121-4036 VALVE GP-S
4. 142-1468 VALVE GP-S
5. 142-1468 VALVE GP-S
6. 148-8986 VALVE GP-S
7. 148-8988 VALVE GP-S
8. 238-1966 VALVE GP-S
9. 238-1967 VALVE GP-S
0. INFORMATION

BACKHOE LOADER 436C BACKHOE LOADER 1FR
436C Backhoe Loader Center Pivot, Single Tilt 1FR01416-01421 (MACHINE) POWERED BY 3054 Engine SEBP2894 436C 1FR (1996)

POWER TRAIN

TRANSMISSION GP

147-0204 TRANSMISSION GP-POWER SHIFT

192-0849 TRANSMISSION GP-POWER SHIFT

#SEBP28940220

192-0849: TRANSMISSION GP-POWER SHIFT

TRANSMISSION GP-POWER SHIFT

192-0849 TRANSMISSION GP-POWER SHIFT -ALL WHEEL DRIVE
S/N 8TN925-1315; 1FR1416-1421
PART OF 202-7432 TRANSMISSION & MOUNTING GP
AN ATTACHMENT

i01395809 SEBP2894

1920849 TRANSMISSION GP-POWER SHIFT Parts scheme

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	178-9566	[2]	SPRING-PISTON
2.	8C-5748 M	[4]	BOLT (M8X1.25X55-MM)
3.	161-3249	[1]	RING-RETAINING
4.	8T-1581	[1]	BEARING-TAPERED ROLLER
5.	150-7732	[2]	SEAL-O-RING
6.	8T-0271 M	[2]	BOLT-SOCKET HEAD (M10X1.5X35-MM)
7.	8T-1580	[1]	CUP-BEARING
8.	4F-7952	[1]	SEAL-O-RING
9.	147-0218	[1]	TUBE AS
10.	148-8988 Y	[2]	VALVE GP-SOLENOID (FORWARD LOW)
11.	8C-8545 M	[2]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
12.	120-9762	[5]	SEAL-O-RING
13.	148-8986 Y	[1]	VALVE GP-SOLENOID (REVERSE)
14.	147-0253	[1]	CASE AS-REAR
	9W-0717	[11]	PLUG
15.	121-7398	[1]	SPACER (70X79.5X2-MM THK)
	121-7402 B	[1]	SHIM (0.6-MM THK)
	121-7401 B	[1]	SHIM (0.18-MM THK)
	121-7400 B	[1]	SHIM (0.08-MM THK)
	121-7399 B	[1]	SHIM (0.05-MM THK)
16.	7T-2651	[1]	STRAINER-SUCTION
17.	9W-5460	[1]	RING
18.	147-0209 Y	[1]	VALVE GP-RELIEF (FORWARD HIGH)
19.	121-7396	[1]	VALVE GP-RELIEF (CLUTCH 2 SOLENOID)
	6V-4589	[1]	SEAL-O-RING
	8L-2746	[1]	SEAL-O-RING
20.	7T-2646	[2]	SPACER (66X79.5X2.02-MM THK)
	6T-9166 B	[2]	SHIM (0.051-MM THK)
	6T-9165 B	[2]	SHIM (0.076-MM THK)
	6T-9164 B	[2]	SHIM (0.178-MM THK)
	6T-9163	[2]	SHIM (0.599-MM THK)
21.	6T-9202	[2]	PLUG
22.	121-4036 Y	[2]	VALVE GP-SOLENOID (TORQUE CONVERTER INLET)
23.	106-9861	[1]	PLATE AS-COVER
24.	122-1878	[1]	RING-SEAL
25.	147-0201	[1]	TUBE AS
26.	7W-3556	[12]	WASHER (14.27X20.57X1.5-MM THK)
27.	147-0234	[6]	BOLT (9/16-18X0.83-IN)
28.	1U-8846 B		SEALANT-GASKET
29.	5P-8066	[2]	SEAL-O-RING
30.	6V-8097 M	[3]	BOLT (M12X1.75X30-MM)
31.	7T-3195	[3]	WASHER (12.3X47X6.35-MM THK)
32.	122-6787	[2]	YOKE AS
		[1]	GUARD
33.	8T-2193	[2]	SEAL-LIP TYPE
34.	121-7385	[1]	PUMP GP-TRANSMISSION
	124-6612	[1]	SEAL-LIP TYPE
35.	9P-9150	[4]	WASHER (8.25X18X0.84-MM THK)
36.	173-0332	[1]	SHAFT AS (COUNTERSHAFT)
	163-9091	[1]	PLUG
37.	7X-4741	[1]	SEAL
38.	9S-4185	[3]	PLUG (3/4-16-THD)
39.	3K-0360	[3]	SEAL-O-RING
40.	123-8906	[5]	CUP-TAPERED ROLLER
41.	123-8905	[5]	CONE-BEARING
42.	121-0694	[2]	WASHER-THRUST (40X70X4-MM THK)
43.	172-5317	[6]	BEARING-SPECIAL
44.	123-8913	[2]	BEARING-ROLLER
45.	147-0224	[1]	GEAR (45/32-TEETH)
46.	8E-5707	[7]	PLATE-END
47.	6V-8757	[6]	RING-RETAINING
48.	6T-9194	[45]	PLATE
49.	6Y-7929	[37]	DISC-FRICTION
50.	9U-8875	[6]	RING-RETAINING
51.	121-2500	[4]	WASHER-THRUST (50X70X4-MM THK)
52.	147-0202	[2]	GEAR (45/24-TEETH)
53.	147-0257	[1]	SHAFT AS-INPUT
	123-2920	[3]	PLUG
54.	9U-8886	[4]	RING-SEAL
55.	123-8910	[1]	CUP-TAPERED ROLLER
56.	123-8909	[1]	CONE-BEARING
57.	7T-6655	[4]	BEARING
58.	147-0259	[2]	SPACER (51.1X54.9X18.7-MM THK)
59.	147-0238	[5]	SPRING AS
60.	6V-5100	[5]	SEAL-O-RING
61.	147-0228	[4]	PISTON-CLUTCH
62.	6T-9196	[7]	SEAL
63.	122-1886	[1]	RING-SEAL
64.	123-8907	[3]	CONE-BEARING
65.	123-8908	[3]	CUP-TAPERED ROLLER
66.	147-0212	[1]	GEAR (42-TEETH)
67.	147-0216	[1]	GEAR (38-TEETH)
68.	147-0203	[3]	WASHER-THRUST (45.3X65X5-MM THK)
69.	147-0258	[1]	SPACER (46X50X16-MM THK)
70.	147-0215	[1]	GEAR (45/19-TEETH)
71.	172-6050	[6]	BEARING-SPECIAL
72.	122-1877	[3]	WASHER-THRUST (40X65X4-MM THK)
73.	6Y-1192	[7]	RING-SEAL
74.	123-8912	[6]	BEARING-ROLLER
75.	9S-4191	[14]	PLUG (9/16-18-THD)
76.	147-0264	[1]	GEAR (45/28-TEETH)
77.	147-0260	[1]	RETAINER-SPRING
78.	095-0928	[1]	RING-RETAINING
79.	147-0205	[2]	WASHER (55X78X5-MM THK)
80.	147-0248	[1]	SPACER (56.2X60X15.8-MM THK)
81.	157-2090	[1]	GEAR (38-TEETH)
82.	172-6743	[2]	BEARING-SPECIAL
83.	147-0242	[1]	GEAR (48-TEETH)
84.	150-3757	[2]	BEARING
85.	009-2062	[2]	SEAL-O-RING
86.	157-2088	[2]	PISTON AS
87.	147-0261	[1]	SHAFT AS-OUTPUT (REAR)
	9W-0717	[2]	PLUG
88.	095-0927	[1]	RING-RETAINING
89.	122-1884	[1]	SPACER (45X49X8-MM THK)
90.	147-0210	[1]	GEAR (45/36-TEETH)
91.	147-0207	[1]	SHAFT AS-OUTPUT (FRONT)
92.	122-1879	[2]	SPACER (58X67.5X2-MM THK)
	104-3288 B	[2]	SHIM (0.05-MM THK)
	121-2059 B	[2]	SHIM (0.08-MM THK)
	121-2060 B	[2]	SHIM (0.18-MM THK)
	121-2061 B	[2]	SHIM (0.6-MM THK)
93.	6V-8210 M	[2]	BOLT (M8X1.25X16-MM)
94.	147-0236	[1]	TUBE AS
95.	147-0226	[1]	TUBE AS
96.	147-0256	[1]	SHAFT AS-REVERSE
	9W-0717	[1]	PLUG
	147-0270	[1]	ORIFICE
97.	147-0211	[1]	ELBOW AS
	3G-6927	[1]	ADAPTER
98.	6Y-7957	[8]	DISC-FRICTION
99.	147-0227	[1]	PISTON-CLUTCH
100.	6V-8335 M	[16]	BOLT-SELF-LOCKING (M10X1.5X40-MM)
101.	147-0262	[4]	WASHER (19.1X24.1X1.5-MM THK)
102.	147-0266	[2]	BOLT (3/4-16X1.417-IN)
103.	189-5746 Y	[1]	SENSOR GP-SPEED
104.	1V-6341	[1]	SEAL
105.	3J-1907	[14]	SEAL-O-RING
106.	8T-0643 M	[1]	BOLT (M10X1.5X80-MM)
107.	6Y-1896	[1]	PLUG AS-DRAIN
	5P-6718	[1]	SEAL-O-RING
108.	205-9244	[4]	PLUG
109.	9X-6615 M	[12]	BOLT (M5X0.8X30-MM)
110.	7T-3253	[2]	DOWEL
111.	7T-3251	[1]	BREATHER
112.	192-0850	[1]	CASE AS
	9W-0717	[4]	PLUG
	147-0268	[4]	PLUG
113.	122-1883	[1]	SPACER (38X45X5-MM THK)
114.	121-0885	[1]	RETAINER
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP28940221

192-0849: TRANSMISSION GP-POWER SHIFT

TRANSMISSION GP-POWER SHIFT

192-0849 TRANSMISSION GP-POWER SHIFT -ALL WHEEL DRIVE
S/N 1FR1416-1421
PART OF 202-7432 TRANSMISSION & MOUNTING GP
AN ATTACHMENT

i01797325 SEBP2894

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	178-9566	[2]	SPRING-PISTON
2.	8C-5748 M	[4]	BOLT (M8X1.25X55-MM)
3.	161-3249	[1]	RING-RETAINING
4.	8T-1581	[1]	BEARING-TAPERED ROLLER
5.	150-7732	[2]	SEAL-O-RING
6.	8T-0271 M	[2]	BOLT-SOCKET HEAD (M10X1.5X35-MM)
7.	8T-1580	[1]	CUP-BEARING
8.	4F-7952	[1]	SEAL-O-RING
9.	147-0218	[1]	TUBE AS
10.	238-1967 Y	[1]	VALVE GP-SOLENOID (FORWARD)
11.	8C-8545 M	[2]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
12.	120-9762	[5]	SEAL-O-RING
13.	238-1966 Y	[1]	VALVE GP-SOLENOID (REVERSE)
14.	147-0253	[1]	CASE AS-REAR
	334-4979	[11]	PLUG
	371-8635	[1]	CASE-REAR
15.	121-7398	[1]	SPACER (70X79.5X2-MM THK)
16.	121-7402 B	[1]	SHIM (0.6-MM THK)
	121-7401 B	[1]	SHIM (0.18-MM THK)
	121-7400 B	[1]	SHIM (0.08-MM THK)
	121-7399 B	[1]	SHIM (0.05-MM THK)
17.	9W-5460	[1]	RING
18.	147-0209 Y	[1]	VALVE GP-RELIEF (FORWARD HIGH)
19.	121-7396	[1]	VALVE GP-RELIEF (CLUTCH 2 SOLENOID)
	6V-4589	[1]	SEAL-O-RING
	8L-2746	[1]	SEAL-O-RING
20.	7T-2646	[2]	SPACER (66X79.5X2.02-MM THK)
21.	6T-9166 B	[2]	SHIM (0.051-MM THK)
	6T-9165 B	[2]	SHIM (0.076-MM THK)
	6T-9164 B	[2]	SHIM (0.178-MM THK)
	6T-9163 B	[2]	SHIM (0.599-MM THK)
22.	121-4036 Y	[2]	VALVE GP-SOLENOID (TORQUE CONVERTER INLET)
23.	106-9861	[1]	PLATE AS-COVER
24.	122-1878	[1]	RING-SEAL
25.	147-0201	[1]	TUBE AS
26.	7W-3556	[12]	WASHER (14.27X20.57X1.5-MM THK)
27.	147-0234	[6]	BOLT (9/16-18X0.83-IN)
29.	5P-8066	[2]	SEAL-O-RING
30.	6V-8097 M	[3]	BOLT (M12X1.75X30-MM)
31.	7T-3195	[3]	WASHER (12.3X47X6.35-MM THK)
32.	122-6787	[2]	YOKE AS
			(EACH INCLUDES)
		[1]	GUARD
33.	302-8432	[2]	SEAL-LIP TYPE
34.	121-7385 Y	[1]	PUMP GP-TRANSMISSION
35.	9P-9150	[4]	WASHER (8.25X18X0.84-MM THK)
36.	173-0332	[1]	SHAFT AS (COUNTERSHAFT)
	334-4979	[1]	PLUG
37.	7X-4741	[1]	SEAL
38.	9S-4185	[3]	PLUG (3/4-16-THD)
39.	3K-0360	[3]	SEAL-O-RING
40.	123-8906	[5]	CUP-TAPERED ROLLER
41.	123-8905	[5]	CONE-BEARING
42.	121-0694	[2]	WASHER-THRUST (40X70X4-MM THK)
43.	172-5317	[6]	BEARING-SPECIAL
44.	123-8913	[2]	BEARING-ROLLER
45.	147-0224	[1]	GEAR (45/32-TEETH)
46.	8E-5707	[7]	PLATE-END
47.	6V-8757	[6]	RING-RETAINING
48.	274-4553	[45]	DISC-CLUTCH
49.	6Y-7929	[37]	DISC-FRICTION
50.	274-8638	[6]	RING-RETAINING
51.	121-2500	[4]	WASHER-THRUST (50X70X4-MM THK)
52.	147-0202	[2]	GEAR (45/24-TEETH)
53.	147-0257	[1]	SHAFT AS-INPUT
53A.	123-0714	[1]	BEARING
	123-2920	[3]	PLUG
54.	9U-8886	[4]	RING-SEAL
55.	123-8910	[1]	CUP-TAPERED ROLLER
56.	123-8909	[1]	CONE-BEARING
57.	7T-6655	[4]	BEARING
58.	147-0259	[2]	SPACER (51.1X54.9X18.7-MM THK)
59.	147-0238	[5]	SPRING AS
60.	6V-5100	[5]	SEAL-O-RING
61.	147-0228	[4]	PISTON-CLUTCH
62.	6T-9196	[7]	SEAL
63.	122-1886	[1]	RING-SEAL
64.	123-8907	[3]	CONE-BEARING
65.	123-8908	[3]	CUP-TAPERED ROLLER
66.	147-0212	[1]	GEAR (42-TEETH)
67.	147-0216	[1]	GEAR (38-TEETH)
68.	147-0203	[3]	WASHER-THRUST (45.3X65X5-MM THK)
69.	147-0258	[1]	SPACER (46X50X16-MM THK)
70.	147-0215	[1]	GEAR (45/19-TEETH)
71.	172-6050	[6]	BEARING-SPECIAL
72.	122-1877	[3]	WASHER-THRUST (40X65X4-MM THK)
73.	6Y-1192	[7]	RING-SEAL
74.	123-8912	[6]	BEARING-ROLLER
75.	9S-4191	[14]	PLUG (9/16-18-THD)
76.	147-0264	[1]	GEAR (45/28-TEETH)
77.	147-0260	[1]	RETAINER-SPRING
78.	095-0928	[1]	RING-RETAINING
79.	147-0205	[2]	WASHER (55X78X5-MM THK)
80.	147-0248	[1]	SPACER (56.2X60X15.8-MM THK)
81.	157-2090	[1]	GEAR (38-TEETH)
82.	172-6743	[2]	BEARING-SPECIAL
83.	147-0242	[1]	GEAR (48-TEETH)
84.	150-3757	[2]	BEARING
85.	009-2062	[2]	SEAL-O-RING
86.	157-2088	[2]	PISTON AS
87.	147-0261	[1]	SHAFT AS-OUTPUT (REAR)
	334-4979	[2]	PLUG
88.	095-0927	[1]	RING-RETAINING
89.	122-1884	[1]	SPACER (45X49X8-MM THK)
90.	147-0210	[1]	GEAR (45/36-TEETH)
91.	147-0207	[1]	SHAFT AS-OUTPUT (FRONT)
92.	122-1879	[2]	SPACER (58X67.5X2-MM THK)
93.	104-3288 B	[2]	SHIM (0.05-MM THK)
	121-2059 B	[2]	SHIM (0.08-MM THK)
	121-2060 B	[2]	SHIM (0.18-MM THK)
	121-2061 B	[2]	SHIM (0.6-MM THK)
94.	147-0236	[1]	TUBE AS
95.	147-0226	[1]	TUBE AS
96.	147-0256	[1]	SHAFT AS-REVERSE
	334-4979	[1]	PLUG
	147-0270	[1]	ORIFICE
97.	147-0211	[1]	ELBOW AS
	3G-6927	[1]	ADAPTER
	342-3830	[1]	ADAPTER
98.	6Y-7957	[8]	DISC-FRICTION
99.	147-0227	[1]	PISTON-CLUTCH
100.	6V-8335 M	[16]	BOLT-SELF-LOCKING (M10X1.5X40-MM)
101.	147-0262	[4]	WASHER (19.1X24.1X1.5-MM THK)
102.	147-0266	[2]	BOLT (3/4-16X1.417-IN)
103.	189-5746 Y	[1]	SENSOR GP-SPEED (MAGNETIC, LOW OUTPUT)
104.	1V-6341	[1]	SEAL
105.	3J-1907	[14]	SEAL-O-RING
106.	8T-0643 M	[1]	BOLT (M10X1.5X80-MM)
107.	6Y-1896	[1]	PLUG AS-DRAIN
	5P-6718	[1]	SEAL-O-RING
108.	205-9244	[4]	PLUG
109.	9X-6615 M	[12]	BOLT (M5X0.8X30-MM)
110.	7T-3253	[2]	DOWEL
111.	7T-3251	[1]	BREATHER (TRANSMISSION)
112.	192-0850	[1]	CASE AS
	334-4963	[4]	PLUG
	334-4979	[4]	PLUG
	370-7751	[1]	CASE-FRONT
113.	122-1883	[1]	SPACER (38X45X5-MM THK)
114.	121-0885	[1]	RETAINER
115.	238-1968 Y	[1]	VALVE GP-SOLENOID
116.	7T-2651	[1]	STRAINER-SUCTION (SUCTION)
117.	6T-9202	[2]	PLUG
118.	6V-8210 M	[2]	BOLT (M8X1.25X16-MM)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP28940222

147-0209: VALVE GP-RELIEF

VALVE GP-RELIEF

147-0209 VALVE GP-RELIEF
S/N 8TN925-1315; 1FR1416-1421
PART OF 147-0200, 147-0204, 192-0849 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT

i00700237 SEBP2894

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7X-4744	[1]	SEAL-O-RING
2.	6V-9178	[1]	SEAL-O-RING
3.	106-9586	[1]	SEAL-O-RING

#SEBP28940223

121-4036: VALVE GP-SOLENOID

VALVE GP-SOLENOID

121-4036 VALVE GP-SOLENOID
S/N 8TN925-1315; 1FR1416-1421
12-VOLT,TORQUE CONVERTER INLET
PART OF 111-7814, 192-0844 TRANSMISSION GP-DIRECT DRIVE, 147-0200, 147-0204, 192-0849 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT

i00200939 SEBP2894

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3J-9196	[1]	NUT-JAM (1/2-20-THD)
2.	122-1672	[1]	CARTRIDGE AS
3.	130-0013	[1]	COIL AS
4.	1S-9593	[2]	STRAP-CABLE
5.	3E-3362	[1]	WEDGE-PLUG LOCK (2-PIN)
6.	186-3736	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
7.	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)

			AVAILABLE REPAIR KIT(S):
	122-1135	[1]	KIT-SEAL
			(INCLUDES RINGS & SEALS)

#SEBP28940224

142-1468: VALVE GP-SOLENOID

VALVE GP-SOLENOID

142-1468 VALVE GP-SOLENOID
S/N 8TN925-1315; 1FR1416-1421
12 VOLT DIRECT CURRENT
PART OF 111-7814, 111-7815 TRANSMISSION GP-DIRECT DRIVE
Type 1
AN ATTACHMENT

i00629557 SEBP2894

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	117-2911	[1]	COIL AS (12-VOLT)(FORWARD)
	1S-9593	[2]	STRAP-CABLE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
2.	130-0912	[1]	COIL AS (12-VOLT)(REVERSE)
	1S-9593	[2]	STRAP-CABLE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
3.	061-8639	[2]	SEAL-O-RING
4.	8L-2779	[4]	SEAL-O-RING
5.	143-4988	[2]	LOCKNUT
6.	143-6227	[1]	PLUG-ORIFICE
7.	143-4655	[2]	WASHER (18.3X24.8X0.8-MM THK)

#SEBP28940225

142-1468: VALVE GP-SOLENOID

VALVE GP-SOLENOID

142-1468 VALVE GP-SOLENOID
S/N 8TN925-1315; 1FR1416-1421
12 VOLT DIRECT CURRENT
PART OF 111-7814, 111-7815, 192-0842, 192-0844 TRANSMISSION GP-DIRECT DRIVE
Type 2
AN ATTACHMENT

i01532725 SEBP2894

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	117-2911	[1]	COIL AS (12-VOLT)(FORWARD)
	1S-9593	[2]	STRAP-CABLE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
2.	130-0912	[1]	COIL AS (12-VOLT)(REVERSE)
	1S-9593	[2]	STRAP-CABLE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
3.	061-8639	[2]	SEAL-O-RING
4.	8L-2779	[4]	SEAL-O-RING
5.	202-0040	[2]	LOCKNUT (11/16-27-THD)
6.	143-6227	[1]	PLUG-ORIFICE
7.	143-4655	[2]	WASHER (18.3X24.8X0.8-MM THK)

#SEBP28940226

148-8986: VALVE GP-SOLENOID

VALVE GP-SOLENOID

148-8986 VALVE GP-SOLENOID
S/N 8TN925-1315; 1FR1416-1421
PART OF 147-0200, 147-0204, 192-0849 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT

i00700246 SEBP2894

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	117-2911	[1]	COIL AS (12-VOLT)
	1S-9593	[2]	STRAP-CABLE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
2.	061-8639	[2]	SEAL-O-RING
3.	8L-2779	[4]	SEAL-O-RING
4.	202-0040	[1]	LOCKNUT (11/16-27-THD)
5.	150-4932	[1]	PLUG-ORIFICE
6.	143-4655	[1]	WASHER (18.3X24.8X0.8-MM THK)

#SEBP28940227

148-8988: VALVE GP-SOLENOID

VALVE GP-SOLENOID

148-8988 VALVE GP-SOLENOID
S/N 8TN925-1315; 1FR1416-1421
PART OF 147-0200, 147-0204, 192-0849 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT

i00700250 SEBP2894

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	117-2911	[1]	COIL AS (12-VOLT)(FORWARD)
	1S-9593	[2]	STRAP-CABLE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
2.	130-0912	[1]	COIL AS (12-VOLT)(REVERSE)
	1S-9593	[2]	STRAP-CABLE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
3.	061-8639	[2]	SEAL-O-RING
4.	8L-2779	[4]	SEAL-O-RING
5.	202-0040	[1]	LOCKNUT (11/16-27-THD)
6.	150-4932	[1]	PLUG-ORIFICE
7.	143-4655	[2]	WASHER (18.3X24.8X0.8-MM THK)

#SEBP28940228

238-1966: VALVE GP-SOLENOID

VALVE GP-SOLENOID

238-1966 VALVE GP-SOLENOID
S/N 8TN1221-1315; 1FR1416-1421
12-VOLT
PART OF 147-0200, 147-0204, 192-0849 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT

i01934883 SEBP2894

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	117-2911	[1]	COIL AS (12-VOLT)
	1S-9593	[2]	STRAP-CABLE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
2.	061-8639	[2]	SEAL-O-RING
3.	8L-2779	[4]	SEAL-O-RING
4.	202-0040	[1]	LOCKNUT (11/16-27-THD)
5.	150-4932	[1]	PLUG-ORIFICE
6.	143-4655	[1]	WASHER (18.3X24.8X0.8-MM THK)

#SEBP28940229

238-1967: VALVE GP-SOLENOID

VALVE GP-SOLENOID

238-1967 VALVE GP-SOLENOID
S/N 8TN1221-1315; 1FR1416-1421
12-VOLT
PART OF 147-0200, 192-0849 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT

i01935400 SEBP2894

For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8L-2779	[4]	SEAL-O-RING
2.	061-8639	[2]	SEAL-O-RING
3.	117-2911	[1]	COIL AS (12-VOLT)
3A.	1S-9593	[2]	STRAP-CABLE
3B.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
3C.	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
3D.	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
4.	130-0912	[1]	COIL AS (12-VOLT)
4A.	1S-9593	[2]	STRAP-CABLE
4B.	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
4C.	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
4D.	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
4E.	8T-8737	[1]	PLUG-SEAL
5.	143-4655	[2]	WASHER (18.3X24.8X0.8-MM THK)
6.	150-4932	[1]	PLUG-ORIFICE
7.	202-0040	[2]	LOCKNUT (11/16-27-THD)

Information:

POWER TRAIN

TRANSMISSION GP

Operation and Maintenance Manual

Fifth Gear Lockout Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Transmission Magnetic Screen - Clean
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Transmission Oil - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Transmission Oil Level - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Special Instruction

Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Transmission May Remain In Neutral Following Operation Of The Neutralizer Push Button Switch
Transmission May Remain In Neutral Following Operation Of The Neutralizer Push Button Switch

Bearing Part Number Listed Incorrectly For Transmissions
Bearing Part Number Listed Incorrectly For Transmissions

Direct Drive Transmission Front Output (All Wheel Dirve) Shaft Failures
Direct Drive Transmission Front Output (All Wheel Dirve) Shaft Failures

Transmission Controls (Shift Lever) May Fail
Transmission Controls (Shift Lever) May Fail

Specifications

Torque Converter<BR> 111-7808
416C, 426C, 428C, 436C & 438C BACKHOE LOADERS TRANSMISSION

Transmission
416C, 426C, 428C, 436C & 438C BACKHOE LOADERS TRANSMISSION

Introduction
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT

Transmission
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT

Tool Operating Manual

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Service Letter-China

Service Letter-Asia

Systems Operation

Systems Operation
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT

Reuse And Salvage Guidelines

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}

Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}

Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}

Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}

Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}

Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}

Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}

Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}

Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}

Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Service Letter-APD

Testing and Adjusting

Testing And Adjusting
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT

Bench Test Procedures

Bench Test Procedure For A 416C, 416D, 420D, 424D, 426C, 428D, 430D, 432D, 436C, 438D, and 442D Backhoe Loader Transmission (Standard Shift) {3030, 3174}
Bench Test Procedure For A 416C, 416D, 420D, 424D, 426C, 428D, 430D, 432D, 436C, 438D, and 442D Backhoe Loader Transmission (Standard Shift) {3030, 3174}

Disassembly and Assembly

Engine, Torque Converter, Transmission & Implement Pump
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC

Engine & Transmission
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC

Solenoid Valve (Transmission)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Transmission (Direct Drive) (If Equipped)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Transmission (Powershift) (If Equipped)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Engine, Torque Converter & Transmission
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Engine & Transmission
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Service Magazine

C-Series Backhoe Loaders Are Being Updated {1000,0685,0720,1001,1013,1350,3030,7950}
1998/01/26

Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08

Use 152-7055 Spring Compressor For Disassembly And Assembly Of Transmission Clutch Shaft Assemblies {3150}
1998/10/05

Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16

Assembling The Transmission Thrust Bearings For Backhoe Loaders {3030}
1999/06/28

Seals for the Relief Valves on the Transmission {5117}
2001/06/04

New Lip Seals Are Used in the Transmission {3030, 3066}
2003/09/08

A New Shaft Assembly Is Now Used {3030}
2003/10/20

A New Torque Converter Is Now Used {3101}
2004/06/28

An Improved Gear Is Now Used in Transmissions {3030}
2004/07/05

Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog 436C :

147-0204 TRANSMISSION GP-POWER SHIFT

147-0200 TRANSMISSION GP-POWER SHIFT

192-0844 TRANSMISSION GP-DIRECT DRIVE

192-0842 TRANSMISSION GP-DIRECT DRIVE

192-0849 TRANSMISSION GP-POWER SHIFT

147-0209 VALVE GP-RELIEF

121-4036 VALVE GP-SOLENOID

142-1468 VALVE GP-SOLENOID

148-8986 VALVE GP-SOLENOID

148-8988 VALVE GP-SOLENOID

238-1966 VALVE GP-SOLENOID

Truck sale:

CATERPILLAR 436C 2000
- BACKHOE LOADERS
WAGNER EQUIPMENT CO
United States

Call

1999 CAT 436C

WORKING MACHINES S.A. DE C.V.
San Juan De Los Lagos, Jalisco, Mexico

USD $23,800

2000 CAT 436C

Iron2sell.com

Call

1992 CAT 436C

JERSEY RENTS INC
Bayville, New Jersey

USD $29,000

1999 CAT 436C

Equipment Pros
Baltimore, Maryland