AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

104-9478 AIR CONDITIONER GP S/N 9JN884-1049 PART OF 144-2221, 145-7168 AIR CONDITIONER AR AN ATTACHMENT 436C


OPERATOR STATION
AIR CONDITIONER GP
CAB GP

BACKHOE LOADER 436C BACKHOE LOADER 9JN
 436C Backhoe Loader Center Pivot, Single Tilt 9JN00884-01049 (MACHINE) POWERED BY 3054 Engine SEBP2895 436C 9JN   (1996)

OPERATOR STATION

AIR CONDITIONER GP
144-2221 AIR CONDITIONER AR
145-7168 AIR CONDITIONER AR
AIR CONDITIONER GP
104-9478 AIR CONDITIONER GP
AIR CONDITIONER GP
142-9660 AIR CONDITIONER GP
COMPRESSOR & MTG GP-REFRIG
137-7140 COMPRESSOR & MTG GP-REFRIG
COMPRESSOR & MTG GP-REFRIG
7E-4641 COMPRESSOR & MTG GP-REFRIG
 

#SEBP28950570
 

104-9478: AIR CONDITIONER GP

104-9478 AIR CONDITIONER GP
S/N 9JN884-1049
PART OF 144-2221, 145-7168 AIR CONDITIONER AR
AN ATTACHMENT
i00720741 SEBP2895
1049478 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-0099 [2] KNOB-CONTROL  
2. 3S-2093 [2] STRAP-CABLE  
3. 7K-3262 [2] SCREW (THUMB)  
4. 7T-9793 [2] VALVE-CHECK  
5. 8Y-6388 [6] LOUVER AS-VENT  
6. 9R-9901 [2] FASTENER (CLIP)  
7. 084-4277 [1] LAMP GP-DOME (12-VOLT)  
  6R-7490 [1] LAMP (12-VOLT, 10-WATT)  
8. 104-2091 [12] SCREW-FLAT HEAD (6-20X0.5-IN)  
9. 104-9481 [1] FILTER ELEMENT-ENCLOSURE AIR  
10. 104-9485 [1] BRACKET AS  
11. 104-9486 [1] COVER-POST  
12. 123-0253 [1] BRACKET AS  
13. 124-0256 [1] PLATE  
14. 131-5492 [2] RETAINER-CAPTIVE  
15. 131-8158 [2] PLATE  
16. 133-7655 [1] FILM-CONTROL  
17. 134-1224 [2] GRILL  
18. 134-2558 [1] COVER  
19. 142-9660 Y [1] AIR CONDITIONER GP  
20. 144-9973 [6] CLAMP  
21. 146-6919 [1] LINER-CAB  
22. 149-1507 [1] LINER AS-CAB  
  131-9253 [1] DUCT  
  131-9254 [1] DUCT  
  133-4964 [8] NUT-JACK  
23. 151-1264 [2] ELBOW  
24. 158-5064 [1] DUCT  
25. 158-5065 [1] DUCT  
26. 5P-4115 [3] WASHER-HARD (7.2X19X2-MM THK)  
27. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
28. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4137 M [9] BOLT (M10X1.5X20-MM)  
30. 8T-4138 M [3] BOLT (M6X1X20-MM)  
31. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
32. 8Y-7446 [4] SCREW-PAN HEAD  
33. 5P-6129 D TUBE (6-M)  
34. 129-1854 E FASTENER-LOOP  
35. 129-1855 E FASTENER-HOOK  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28950571
 

142-9660: AIR CONDITIONER GP

142-9660 AIR CONDITIONER GP
S/N 9JN884-1049
PART OF 104-9478 AIR CONDITIONER GP, 148-9152 KIT-AIR CONDITIONER
AN ATTACHMENT AND FIELD INSTALLATION
i00720861 SEBP2895
1429660 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-8715 [1] GROMMET  
2. 2P-4339 [4] NUT-JAM (7/16-28-THD)  
3. 2S-3745 [4] SCREW-TAPPING (10-16X0.5-IN)  
4. 174-1490 [1] MOTOR AS-ELECTRIC  
  7T-0093 [2] PIN-CONNECTOR (12-GA TO 14-GA)  
  177-9645 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  177-9643 [1] LOCK  
  177-9644 [1] SEAL-RECEPTACLE  
5. 6P-3236 [1] SWITCH AS-ROTARY  
  6V-8362 [5] SCREW-MACHINE (8-32X0.31-IN)  
  9B-7233 [5] LOCKWASHER  
6. 7X-2049 [1] TUBE AS  
7. 8C-3756 [1] FILM-IDENTIFICATION (AIR CONDITIONER)  
8. 8C-4586 [2] CLAMP  
9. 8C-7581 M [1] SCREW-MACHINE (M4X0.7X8-MM)  
10. 100-3426 [2] WHEEL AS-BLOWER  
11. 124-7141 [2] WASHER-SPECIAL  
12. 129-1274 [4] FASTENER AS-AIR CONDITIONER  
13. 133-9012 [1] FUSE (15-AMPERE)  
14. 134-2885 [1] RESISTOR  
15. 141-9784 M [1] BOLT (M6X1X190-MM)  
16. 147-1481 [1] COVER  
17. 147-1482 [1] PLATE AS  
18. 147-1483 [1] BLOWER AS  
19. 147-1484 [1] PLATE AS  
20. 147-1486 [1] COIL AS-EVAPORATOR  
21. 147-1487 [1] GASKET  
22. 148-1319 [1] GASKET  
23. 148-1903 [1] GASKET  
24. 148-5557 [1] INSULATION  
25. 148-6737 [1] SWITCH AS-TEMPERATURE  
26. 148-6751 [1] HARNESS AS-HEATER & AIR COND  
  7K-4474 [1] CONNECTOR AS  
  6K-7361 [1] CONNECTOR-BULLET  
  6T-6505 [7] HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8L-8413 [5] STRAP-CABLE (WHITE)  
  2L-8069 [1] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  8T-9850 [5] TERMINAL-BLADE (10-GA TO 12-GA)  
  6T-6506 [2] TERMINAL-BLADE (14-GA TO 18-GA)  
  5P-1477 [4] TERMINAL-FORK (10-GA TO 12-GA, NO. 8 SCREW)  
  5P-1475 [1] TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)  
27. 151-8373 [1] GASKET  
28. 151-8376 [1] PLATE-ORIFICE  
29. 151-8377 [1] PLATE-ORIFICE  
30. 154-5630 [1] GASKET  
31. 154-5631 [1] GASKET  
32. 129-3178 M [19] LOCKNUT (M6X1-THD)  
33. 3S-2093 [2] STRAP-CABLE  
34. 6V-1668 [2] WASHER (6.5X29.1X3-MM THK)  
35. 6V-7728 M [1] BOLT (M6X1X45-MM)  
36. 8M-2771 [1] CLIP  
37. 8T-4171 M [4] BOLT (M6X1X12-MM)  
38. 8T-4205 [25] WASHER-HARD (7.2X14.5X2-MM THK)  
39. 152-6609 E SEAL-BULK (86-CM)  
40. 5P-6410 D SEAL (0.5-M)  
41. 4K-2089 [4] RIVET-POP  
42. 5P-5637 [2] SEAL  
43. 147-1485 [2] GASKET-DUCT  
44. 6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP28950572
 

154-5473: CAB AR-ENCLOSED ROPS

154-5473 CAB AR-ENCLOSED ROPS
S/N 9JN884-1049
AN ATTACHMENT
i01120661 SEBP2895
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  104-3450 Y [1] CAB GP-ENCLOSED ROPS  
    -OR-
  154-5476 Y [1] CAB GP  
  104-6044 Y [1] CONSOLE GP-FRONT  
  3E-8211 E FILM-STRIPE (400CM)  
  110-0037 [1] FILM (CATERPILLAR, SUN VISOR)  
  104-6045 Y [1] FLOORPLATE GP  
  104-6038 Y [1] HEATER GP-CAB  
  104-6043 Y [1] LINES GP-HEATER  
  131-2747 [1] MAT-PROTECTIVE  
  9R-9758 Y [1] MIRROR GP-REAR VIEW  
  Y [1] WIPER GP-WINDOW  
  154-5413 Y [1] WIRING GP-CAB  
  105-5158 Y [1] WIRING GP-CAB  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP28950573
 

154-5474: CAB AR-ENCLOSED ROPS

154-5474 CAB AR-ENCLOSED ROPS
S/N 9JN884-1049
CENTER PIVOT
AN ATTACHMENT
i01120679 SEBP2895
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  135-3414 Y [1] CAB GP-ENCLOSED ROPS  
    -OR-
  154-5477 Y [1] CAB GP  
  104-6044 Y [1] CONSOLE GP-FRONT  
  3E-8211 E FILM-STRIPE (400CM)  
  110-0037 [1] FILM (CATERPILLAR, SUN VISOR)  
  104-6045 Y [1] FLOORPLATE GP  
  104-6038 Y [1] HEATER GP-CAB  
  104-6043 Y [1] LINES GP-HEATER  
  131-2747 [1] MAT-PROTECTIVE  
  104-6031 Y [1] WASHER GP-WINDOW  
  Y [1] WIPER GP-WINDOW  
  105-5155 Y [1] WIRING GP-CAB  
  154-5414 Y [1] WIRING GP-ENGINE  
  104-5969 Y [1] WIRING GP-POWER RECEPTACLE  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP28950574
 

154-5476: CAB GP

154-5476 CAB GP
S/N 9JN884-1049
PART OF 154-5473 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
i01032271 SEBP2895
1545476 CAB GP Parts scheme 1545476 CAB GP Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-3449 Y [1] CAB GP-ENCLOSED ROPS  
2. 168-9234 [1] HARNESS AS-PLATFORM  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  155-2265 [3] KIT-CONNECTING PLUG (8-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INETRFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  9G-2264 [1] CLIP-CONNECTOR  
  5P-3176 [1] CONNECTOR AS  
  7N-9738 HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  8T-8729 [49] PIN-CONNECTOR (16-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  3E-3377 [2] WEDGE-RECEPTACLE LOCK (4-PIN)  
  3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
  3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
  8T-8730 [38] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  128-4170 [2] TERMINAL AS  
  2L-8069 [2] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  5P-4571 [1] TERMINAL-BLADE (14-GA TO 16-GA)  
  8T-8737 [6] PLUG-SEAL  
3. 3S-2093 [25] STRAP-CABLE  
4. 8Y-7252 [1] GLASS (FRONT)  
5. 8Y-7253 [1] GLASS-CAB (RH)  
6. 8Y-7254 [1] GLASS-CAB (LH)  
7. 9R-9865 [1] FENDER (LH)  
8. 9R-9864 [1] FENDER (RH)  
9. 131-3986 M [2] SCREW (M4X0.7X12-MM)  
10. 5P-4116 [31] WASHER-HARD (8.8X20.5X2-MM THK)  
11. 8T-4908 M [18] BOLT (M8X1.25X25-MM)  
12. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
13. 5C-7261 M [5] NUT (M8X1.25-THD)  
14. 6V-1392 D SEAL (0.6-M)  
15. 8T-4222 [2] WASHER-PLATED (11X32X2.5-MM THK)  
16. 104-3918 [2] PLATE  
17. 106-1742 B [6] PLATE  
18. 128-7772 [1] PLATE (LH)  
19. 128-7773 [1] PLATE (RH)  
20. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
21. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
22. 8Y-7255 Y [1] WINDOW GP-CAB (REAR)  
23. 131-3987 M [13] SCREW (M4X0.7X12-MM)  
24. 147-1982 [1] CHANNEL (LH)  
25. 147-1980 [1] CHANNEL AS (RH)  
  140-9921 [2] INSERT-THREADED  
26. 159-4945 [2] KEEPER (LH)  
27. 159-4946 [2] KEEPER  
28. 8Y-7274 [1] GLASS (LH)  
29. 8Y-7272 [1] GLASS (RH)  
30. 134-3061 [1] PLATE (LH)  
31. 134-3060 [1] PLATE (RH)  
32. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
33. 154-5426 Y [1] WINDOW GP-CAB (RH)  
34. 154-5425 Y [1] WINDOW GP-CAB (LH)  
35. Y [1] DOOR GP-CAB (RH)  
36. Y [1] DOOR GP-CAB (LH)  
37. 129-5257 [8] BUSHING  
38. 129-5256 [12] BUSHING  
39. 8Y-7444 [2] PIN  
40. 8S-7803 [8] RING-RETAINING  
41. 117-7414 [2] PIN  
42. 9R-5616 [2] PLUG  
43. 108-4311 [2] SCREW-MACHINE (3/8-16X0.75-IN)  
44. 134-3062 [2] STRIKER  
45. 134-3503 [1] GUARD-STRIKER (LH)  
46. 134-3059 [1] GUARD (RH)  
47. 144-0195 E HOSE (410-CM EACH)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28950575
 

154-5477: CAB GP

154-5477 CAB GP
S/N 9JN884-1049
PART OF 154-5474 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
i01018413 SEBP2895
1545477 CAB GP Parts scheme 1545477 CAB GP Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-3449 Y [1] CAB GP-ENCLOSED ROPS  
2. 104-5961 [1] HARNESS AS-PLATFORM (COSA)  
  9G-2264 [1] CLIP-CONNECTOR  
  6K-7360 [1] CONNECTOR-BULLET  
  6K-7361 [2] CONNECTOR-BULLET  
  5P-3176 [1] CONNECTOR AS  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  8T-8729 [55] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2265 [2] KIT-CONNECTING PLUG (8-PIN)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [5] PLUG-SEAL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8806 [2] KIT-RECEPTACLE (8-PIN)  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  8T-8730 [68] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  128-4170 [2] TERMINAL AS  
  2L-8069 [2] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  2L-8079 [3] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
3. 3S-2093 [25] STRAP-CABLE  
4. 8Y-7252 [1] GLASS  
5. 8Y-7253 [1] GLASS-CAB  
6. 8Y-7254 [1] GLASS-CAB  
7. 9R-9865 [1] FENDER (LH)  
8. 9R-9864 [1] FENDER (RH)  
9. 131-3986 M [2] SCREW (M4X0.7X12-MM)  
10. 5P-4116 [31] WASHER-HARD (8.8X20.5X2-MM THK)  
11. 8T-4908 M [18] BOLT (M8X1.25X25-MM)  
12. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
13. 5C-7261 M [5] NUT (M8X1.25-THD)  
14. 6V-1392 D SEAL (0.6-M)  
15. 8T-4222 [2] WASHER-PLATED (11X32X2.5-MM THK)  
16. 104-3918 [2] PLATE  
17. 106-1742 [6] PLATE  
18. 128-7772 [1] PLATE (LH)  
19. 128-7773 [1] PLATE (RH)  
20. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
21. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
22. 8Y-7255 Y [1] WINDOW GP-CAB (REAR)  
23. 131-3987 M [13] SCREW (M4X0.7X12-MM)  
24. 147-1982 [1] CHANNEL  
25. 147-1980 [1] CHANNEL AS  
26. 159-4945 [2] KEEPER (LH)  
27. 159-4946 [2] KEEPER  
28. 8Y-7274 [1] GLASS  
29. 8Y-7272 [1] GLASS  
30. 134-3061 [1] PLATE  
31. 134-3060 [1] PLATE  
32. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
33. 154-5426 Y [1] WINDOW GP-CAB (RH)  
34. 154-5425 Y [1] WINDOW GP-CAB (LH)  
35. Y [1] DOOR GP-CAB (RH)  
36. Y [1] DOOR GP-CAB (LH)  
37. 129-5257 [8] BUSHING  
38. 129-5256 [12] BUSHING  
39. 8Y-7444 [2] PIN  
40. 8S-7803 [8] RING-RETAINING  
41. 117-7414 [2] PIN  
42. 144-0195 E HOSE (410CM EACH)  
43. 108-4311 [2] SCREW-MACHINE (3/8-16X0.75-IN)  
44. 134-3062 [2] STRIKER  
45. 134-3503 [1] GUARD-STRIKER (LH)  
46. 134-3059 [1] GUARD (RH)  
47. 4P-7581 [1] CLIP (LADDER)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28950576
 

104-3449: CAB GP-ENCLOSED ROPS

104-3449 CAB GP-ENCLOSED ROPS
S/N 9JN884-1049
PART OF 154-5476, 154-5477 CAB GP, 104-3450, 135-3414 CAB GP-ENCLOSED ROPS
AN ATTACHMENT
i00473057 SEBP2895
1043449 CAB GP-ENCLOSED ROPS Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-3490 M [9] NUT-WELD (M10X1.5-THD)  
2. 8Y-7311 [2] HINGE  
3. 7T-1099 [15] LINK  
4. 113-5973 [6] HINGE  
5. [1] CANOPY AS  
6. 140-2959 [1] HANDHOLD  
7. 8Y-7292 [1] HANDHOLD  
8. 6V-9632 M [5] NUT-WELD (M6X1-THD)  
9. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
  M   METRIC PART
 

#SEBP28950577
 

104-3450: CAB GP-ENCLOSED ROPS

104-3450 CAB GP-ENCLOSED ROPS
S/N 9JN884-1049
PART OF 154-5473 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
i00473061 SEBP2895
1043450 CAB GP-ENCLOSED ROPS Parts scheme 1043450 CAB GP-ENCLOSED ROPS Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-3449 Y [1] CAB GP-ENCLOSED ROPS  
2. 168-9234 [2] HARNESS AS-PLATFORM  
    (EACH INCLUDES)
  9G-2264 [1] CLIP-CONNECTOR  
  6K-7360 [1] CONNECTOR-BULLET  
  6K-7361 [2] CONNECTOR-BULLET  
  5P-3176 [1] CONNECTOR AS  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  8T-8729 [49] PIN-CONNECTOR (16-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  155-2265 [2] KIT-CONNECTING PLUG (8-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTEFACE SEAL)
  8T-8737 [6] PLUG-SEAL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8730 [38] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  128-4170 [1] TERMINAL AS  
  2L-8069 [2] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  5P-4571 [1] TERMINAL-BLADE (14-GA TO 16-GA)  
3. 3S-2093 [21] STRAP-CABLE  
4. 8Y-7252 [1] GLASS  
5. 8Y-7254 [1] GLASS-CAB  
6. 8Y-7253 [1] GLASS-CAB  
7. 9R-9865 [1] FENDER (LH)  
8. 9R-9864 [1] FENDER (RH)  
9. 9R-5616 [2] PLUG  
10. 5P-4116 [31] WASHER-HARD (8.8X20.5X2-MM THK)  
11. 8T-4908 M [18] BOLT (M8X1.25X25-MM)  
12. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
13. 5C-7261 M [5] NUT (M8X1.25-THD)  
14. 6V-1392 D SEAL (0.6-M)  
15. 8T-4222 [2] WASHER-PLATED (11X32X2.5-MM THK)  
16. 104-3918 [2] PLATE  
17. 106-1742 [6] PLATE  
18. 128-7772 [1] PLATE (LH)  
19. 128-7773 [1] PLATE (RH)  
20. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
21. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
22. 8Y-7255 Y [1] WINDOW GP-CAB (REAR)  
23. 131-3987 M [5] SCREW (M4X0.7X12-MM)  
24. 8Y-7270 [1] CHANNEL (LH)  
25. 8Y-7267 [1] CHANNEL (RH)  
26. 9X-2044 M [8] SCREW-TRUSS HEAD (M6X1X16-MM)  
27. 104-9475 [4] PLATE AS  
28. 8Y-7274 [1] GLASS  
29. 8Y-7272 [1] GLASS  
30. 134-3061 [1] PLATE  
31. 134-3060 [1] PLATE  
32. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
33. 130-3492 Y [1] DOOR GP-CAB  
34. 104-7011 Y [1] DOOR GP-CAB  
35. 129-8842 Y [1] WINDOW GP-CAB (LH)  
36. 129-8841 Y [1] WINDOW GP-CAB (RH)  
37. 129-5257 [8] BUSHING  
38. 129-5256 [12] BUSHING  
39. 8Y-7444 [2] PIN (HINGE)  
40. 8S-7803 [8] RING-RETAINING  
41. 117-7414 [2] PIN  
42. 131-3986 M [2] SCREW (M4X0.7X12-MM)  
43. 108-4311 [2] SCREW-MACHINE (3/8-16X0.75-IN)  
44. 134-3062 [2] STRIKER  
45. 134-3503 [1] GUARD-STRIKER  
46. 134-3059 [1] GUARD  
47. 4P-7581 [1] CLIP (LADDER)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28950578
 

135-3414: CAB GP-ENCLOSED ROPS

135-3414 CAB GP-ENCLOSED ROPS
S/N 9JN884-1049
PART OF 154-5474 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
i00496332 SEBP2895
1353414 CAB GP-ENCLOSED ROPS Parts scheme 1353414 CAB GP-ENCLOSED ROPS Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-3449 Y [1] CAB GP-ENCLOSED ROPS  
2. 104-5961 [1] HARNESS AS-PLATFORM (COSA)  
  9G-2264 [1] CLIP-CONNECTOR  
  6K-7360 [1] CONNECTOR-BULLET  
  6K-7361 [2] CONNECTOR-BULLET  
  5P-3176 [1] CONNECTOR AS  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  8T-8729 [55] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2265 [2] KIT-CONNECTING PLUG (8-PIN)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [5] PLUG-SEAL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8806 [2] KIT-RECEPTACLE (8-PIN)  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  8T-8730 [68] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  128-4170 [2] TERMINAL AS  
  2L-8069 [2] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  2L-8079 [3] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
3. 3S-2093 [25] STRAP-CABLE  
4. 8Y-7252 [1] GLASS  
5. 8Y-7253 [1] GLASS-CAB  
6. 8Y-7254 [1] GLASS-CAB  
7. 9R-9865 [1] FENDER (LH)  
8. 9R-9864 [1] FENDER (RH)  
9. 5P-5992 BD HOSE (8.2M)  
10. 5P-4116 [31] WASHER-HARD (8.8X20.5X2-MM THK)  
11. 8T-4908 M [18] BOLT (M8X1.25X25-MM)  
12. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
13. 5C-7261 M [5] NUT (M8X1.25-THD)  
14. 6V-1392 BD SEAL (0.6M)  
15. 8T-4222 [2] WASHER-PLATED (11X32X2.5-MM THK)  
16. 104-3918 [2] PLATE  
17. 106-1742 [6] PLATE  
18. 128-7772 [1] PLATE (LH)  
19. 128-7773 [1] PLATE (RH)  
20. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
21. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
22. 8Y-7255 Y [1] WINDOW GP-CAB (REAR)  
23. 131-3987 M [5] SCREW (M4X0.7X12-MM)  
24. 8Y-7270 [1] CHANNEL (LH)  
25. 8Y-7267 [1] CHANNEL (RH)  
26. 9X-2044 M [8] SCREW-TRUSS HEAD (M6X1X16-MM)  
27. 104-9475 [4] PLATE AS  
28. 8Y-7274 [1] GLASS  
29. 8Y-7272 [1] GLASS  
30. 134-3061 [1] PLATE  
31. 134-3060 [1] PLATE  
32. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
33. 130-3492 Y [1] DOOR GP-CAB  
34. 104-7011 Y [1] DOOR GP-CAB  
35. 129-8842 Y [1] WINDOW GP-CAB (LH)  
36. 129-8841 Y [1] WINDOW GP-CAB (RH)  
37. 129-5257 [8] BUSHING  
38. 129-5256 [12] BUSHING  
39. 8Y-7444 [2] PIN (HINGE)  
40. 8S-7803 [8] RING-RETAINING  
41. 117-7414 [2] PIN  
42. 131-3986 M [2] SCREW (M4X0.7X12-MM)  
43. 108-4311 [2] SCREW-MACHINE (3/8-16X0.75-IN)  
44. 134-3062 [2] STRIKER  
45. 134-3503 [1] GUARD-STRIKER  
46. 134-3059 [1] GUARD  
47. 4P-7581 [1] CLIP (LADDER)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28950579
 

163-9192: CANOPY AR-OPEN ROPS

163-9192 CANOPY AR-OPEN ROPS
S/N 9JN884-1049
FOR USE WITH @@@@@120-9638@@@@@, @@@@@120-9585@@@@@, MACHINES WHERE DIP BEAMS ARE REQUIRED ON ROADING LIGHTS
AN ATTACHMENT
i01021561 SEBP2895
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  144-6480 Y [1] CANOPY GP-OPEN ROPS  
  104-3923 Y [1] CONSOLE GP-FRONT  
  132-5981 Y [1] COVER GP-HOOD  
  104-3913 Y [1] FLOORPLATE GP  
  131-3404 Y [1] WIRING GP-CANOPY  
  154-5414 Y [1] WIRING GP-ENGINE  
  104-5969 Y [1] WIRING GP-POWER RECEPTACLE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Service Magazine
New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342}
2003/05/05
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320}
2004/05/17
An Air Conditioner Kit for Use When Servicing the Air Conditioning System Is Now Available {7320, 7320}
2012/08/24
Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17

Caterpillar Parts SIS Catalog 436C :

145-7168 AIR CONDITIONER AR
144-2221 AIR CONDITIONER AR
TOOTH GP-UNI
9W-1880 TOOTH GP-UNI
TOOTH GP-UNI
9R-5866 TOOTH GP-UNI
9W-8209 TIP-PENETRATION
9W-8208 TIP-PENETRATION
1U-3209 TIP-PENETRATION
4T-2203 TIP-ABRASION
AIR CONDITIONER GP
142-9660 AIR CONDITIONER GP
154-5473 CAB AR-ENCLOSED ROPS
154-5474 CAB AR-ENCLOSED ROPS
CAB GP
154-5476 CAB GP
CAB GP
154-5477 CAB GP
CAB GP-ENCLOSED ROPS
104-3449 CAB GP-ENCLOSED ROPS
CAB GP-ENCLOSED ROPS
104-3450 CAB GP-ENCLOSED ROPS
CAB GP-ENCLOSED ROPS
135-3414 CAB GP-ENCLOSED ROPS

Truck sale:

CATERPILLAR 436C 2000
 
CATERPILLAR 436C 2000
- BACKHOE LOADERS
WAGNER EQUIPMENT CO
United States
1999 CAT 436C
Call 
1999 CAT 436C

WORKING MACHINES S.A. DE C.V.
San Juan De Los Lagos, Jalisco, Mexico
2000 CAT 436C
USD $23,800 
2000 CAT 436C

Iron2sell.com
1992 CAT 436C
Call 
1992 CAT 436C

JERSEY RENTS INC
Bayville, New Jersey
1999 CAT 436C
USD $29,000 
1999 CAT 436C

Equipment Pros
Baltimore, Maryland
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.