AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

147-0200 TRANSMISSION GP-POWER SHIFT S/N 2AR1850-1850 PART OF 142-4436 TRANSMISSION AR-POWER SHIFT AN ATTACHMENT 436C


POWER TRAIN
TRANSMISSION GP
VALVE GP-RELIEF
ELECTRICAL AND STARTING SYSTEM
VALVE GP

BACKHOE LOADER 436C BACKHOE LOADER 1PR
 436C Backhoe Loader Center Pivot, Parallel Lift 1PR01599-01815 (MACHINE) POWERED BY 3054 Engine SEBP2896 436C 1PR   (1996)

POWER TRAIN

TRANSMISSION GP
TRANSMISSION GP-DIRECT DRIVE
111-7815 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-POWER SHIFT
147-0200 TRANSMISSION GP-POWER SHIFT
TRANSMISSION GP-POWER SHIFT
147-0200 TRANSMISSION GP-POWER SHIFT
TRANSMISSION GP-POWER SHIFT
147-0200 TRANSMISSION GP-POWER SHIFT
TRANSMISSION GP-POWER SHIFT
147-0204 TRANSMISSION GP-POWER SHIFT
TRANSMISSION GP-POWER SHIFT
147-0204 TRANSMISSION GP-POWER SHIFT
 

#SEBP28960210
 

147-0200: TRANSMISSION GP-POWER SHIFT

147-0200 TRANSMISSION GP-POWER SHIFT
S/N 2AR1850-1850
PART OF 142-4436 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT
i01346318 SEBP2896
1470200 TRANSMISSION GP-POWER SHIFT Parts scheme 1470200 TRANSMISSION GP-POWER SHIFT Parts scheme 1470200 TRANSMISSION GP-POWER SHIFT Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
7. 147-0245 [1] CASE AS-FRONT  
  9W-0717 [4] PLUG  
  147-0268 [4] PLUG  
8. 147-0218 [1] TUBE AS  
9. 148-8988 Y [2] VALVE GP-SOLENOID (FORWARD HIGH)  
10. 8C-8545 M [2] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
11. 120-9762 [5] SEAL-O-RING  
12. 148-8986 Y [1] VALVE GP-SOLENOID (REVERSE)  
13. 147-0253 [1] CASE AS-REAR  
  9W-0717 [11] PLUG  
14. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
15. 121-7402 B [1] SHIM (0.6-MM THK)  
16. 121-7401 B [1] SHIM (0.18-MM THK)  
17. 121-7400 B [1] SHIM (0.08-MM THK)  
18. 121-7399 B [1] SHIM (0.05-MM THK)  
19. 7T-2646 B [2] SPACER (66X79.5X2.02-MM THK)  
20. 6T-9166 B [2] SHIM (0.051-MM THK)  
21. 6T-9165 B [2] SHIM (0.076-MM THK)  
22. 6T-9164 B [2] SHIM (0.178-MM THK)  
23. 1U-8846 B [1] SEALANT-GASKET  
24. 147-0221 [1] PLUG-VALVE  
25. 7W-3556 [8] WASHER (14.27X20.57X1.5-MM THK)  
26. 147-0234 [4] BOLT (9/16-18X0.83-IN)  
27. 147-0239 [1] PLUG-CUP  
28. 5P-8066 [1] SEAL-O-RING  
29. 6V-8097 M [1] BOLT (M12X1.75X30-MM)  
30. 7T-3195 [1] WASHER (12.3X47X6.35-MM THK)  
31. 122-6787 [1] YOKE AS  
  [1] GUARD  
32. 8T-2193 [1] SEAL-LIP TYPE  
33. 121-7385 [1] PUMP GP-TRANSMISSION  
  124-6612 [1] SEAL-LIP TYPE  
34. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
35. 8C-5748 M [4] BOLT (M8X1.25X55-MM)  
36. 7X-4741 [1] SEAL  
37. 9S-4185 [3] PLUG (3/4-16-THD)  
38. 3K-0360 [3] SEAL-O-RING  
39. 123-8906 [3] CUP-TAPERED ROLLER  
40. 123-8905 [3] CONE-BEARING  
41. 121-0694 [2] WASHER-THRUST (40X70X4-MM THK)  
42. 172-5317 [6] BEARING-SPECIAL  
43. 123-8913 [2] BEARING-ROLLER  
44. 147-0224 [1] GEAR (45/32-TEETH)  
45. 8E-5707 [6] PLATE-END  
46. 6V-8757 [5] RING-RETAINING  
47. 6T-9194 [37] PLATE  
48. 6Y-7929 [37] DISC-FRICTION  
49. 9U-8875 [6] RING-RETAINING  
50. 121-2500 [4] WASHER-THRUST (50X70X4-MM THK)  
51. 147-0202 [2] GEAR (45/24-TEETH)  
52. 147-0257 [1] SHAFT AS-INPUT  
  123-2920 [3] PLUG  
53. 9U-8886 [4] RING-SEAL  
54. 123-8910 [1] CUP-TAPERED ROLLER  
55. 123-8909 [1] CONE-BEARING  
56. 7T-6655 [4] BEARING  
57. 147-0259 [2] SPACER (51.1X54.9X18.7-MM THK)  
58. 147-0238 [4] SPRING AS  
59. 6V-5100 [4] SEAL-O-RING  
60. 147-0228 [4] PISTON-CLUTCH  
61. 6T-9196 [6] SEAL  
62. 122-1886 [1] RING-SEAL  
63. 123-8907 [3] CONE-BEARING  
64. 123-8908 [3] CUP-TAPERED ROLLER  
65. 147-0212 [1] GEAR (42-TEETH)  
66. 147-0216 [1] GEAR (38-TEETH)  
67. 147-0203 [2] WASHER-THRUST (45.3X65X5-MM THK)  
68. 147-0258 [1] SPACER (46X50X16-MM THK)  
69. 147-0215 [1] GEAR (45/19-TEETH)  
70. 178-9566 [2] SPRING-PISTON  
71. 122-1877 [2] WASHER-THRUST (40X65X4-MM THK)  
72. 6Y-1192 [7] RING-SEAL  
73. 123-8912 [4] BEARING-ROLLER  
74. 9S-4191 [14] PLUG (9/16-18-THD)  
75. 147-0264 [1] GEAR (45/28-TEETH)  
76. 147-0260 [1] RETAINER-SPRING  
77. 095-0928 [1] RING-RETAINING  
78. 147-0205 [2] WASHER (55X78X5-MM THK)  
79. 147-0248 [1] SPACER (56.2X60X15.8-MM THK)  
80. 157-2090 [1] GEAR (38-TEETH)  
81. 173-0332 [1] SHAFT AS (COUNTERSHAFT)  
  163-9091 [1] PLUG  
82. 147-0242 [1] GEAR (48-TEETH)  
83. 150-3757 [2] BEARING  
84. 009-2062 [2] SEAL-O-RING  
85. 157-2088 [2] PISTON AS  
86. 147-0261 [1] SHAFT AS-OUTPUT (REAR)  
  9W-0717 [2] PLUG  
87. 095-0927 [1] RING-RETAINING  
88. 122-1879 [1] SPACER (58X67.5X2-MM THK)  
89. 104-3288 B [1] SHIM (0.05-MM THK)  
90. 121-2059 B [1] SHIM (0.08-MM THK)  
91. 121-2060 B [1] SHIM (0.18-MM THK)  
92. 121-2061 B [1] SHIM (0.6-MM THK)  
93. 147-0211 [1] ELBOW AS  
  3G-6927 [1] ADAPTER  
94. 6V-8335 M [16] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
95. 147-0262 [4] WASHER (19.1X24.1X1.5-MM THK)  
96. 147-0266 [2] BOLT (3/4-16X1.417-IN)  
97. 6V-2455 [1] SENSOR GP-SPEED  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 J [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 BE SLEEVE  
98. 1V-6341 [1] SEAL  
99. 3J-1907 [14] SEAL-O-RING  
100. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
101. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
102. 147-0232 [4] PLUG  
103. 9X-6615 M [12] BOLT (M5X0.8X30-MM)  
104. 7T-3253 [2] DOWEL  
105. 7T-3251 [1] BREATHER  
106. 7X-4744 [1] SEAL-O-RING  
107. 147-0255 [1] HOUSING-SPRING  
108. 147-0206 [1] SPRING  
109. 2H-3698 [1] BALL  
110. 147-0256 [1] SHAFT AS-REVERSE  
  9W-0717 [1] PLUG  
  147-0270 [1] ORIFICE  
111. 147-0226 [1] TUBE AS  
112. 147-0236 [1] TUBE AS  
113. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
114. 106-9861 [1] PLATE AS-COVER  
115. 121-4036 Y [1] VALVE GP-SOLENOID (TORQUE CONVERTER INLET)  
116. 6T-9202 [2] PLUG  
117. 121-7396 [1] VALVE GP-RELIEF (CLUTCH 2 SOLENOID)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
118. 147-0209 Y [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
119. 9W-5460 [1] RING  
120. 7T-2651 [1] STRAINER-SUCTION  
121. 4F-7952 [1] SEAL-O-RING  
122. 8T-1580 [1] CUP-BEARING  
123. 8T-0271 M [2] BOLT-SOCKET HEAD (M10X1.5X35-MM)  
124. 150-7732 [2] SEAL-O-RING  
125. 8T-1581 [1] BEARING-TAPERED ROLLER  
126. 6T-9163 B [2] SHIM (0.599-MM THK)  
127. 1R-0772 [1] FILTER ELEMENT AS-OIL (HYDRAULIC)  
128. 172-6050 [4] BEARING-SPECIAL  
129. 172-6743 [2] BEARING-SPECIAL  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   INCLUDED IN KIT-RECEPTACL
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28960211
 

147-0200: TRANSMISSION GP-POWER SHIFT

147-0200 TRANSMISSION GP-POWER SHIFT
S/N 2AR1851-1874
PART OF 142-4436 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT
i01346335 SEBP2896
1470200 TRANSMISSION GP-POWER SHIFT Parts scheme 1470200 TRANSMISSION GP-POWER SHIFT Parts scheme 1470200 TRANSMISSION GP-POWER SHIFT Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-0885 [1] RETAINER  
2. 172-6743 [2] BEARING-SPECIAL  
3. 172-6050 [4] BEARING-SPECIAL  
4. 119-4740 [1] FILTER-OIL (STANDARD EFFICIENCY)  
5. 8T-0271 M [2] BOLT-SOCKET HEAD (M10X1.5X35-MM)  
6. 8T-1581 [1] BEARING-TAPERED ROLLER  
7. 150-7732 [2] SEAL-O-RING  
8. 147-0245 [1] CASE AS-FRONT  
  9W-0717 [4] PLUG  
  147-0268 [4] PLUG  
9. 147-0218 [1] TUBE AS  
10. 238-1967 Y [2] VALVE GP-SOLENOID (FORWARD)  
11. 8C-8545 M [2] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
12. 120-9762 [5] SEAL-O-RING  
13. 238-1966 Y [1] VALVE GP-SOLENOID (REVERSE)  
14. 147-0253 [1] CASE AS-REAR  
  9W-0717 [11] PLUG  
15. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
  121-7402 B [1] SHIM (0.6-MM THK)  
  121-7401 B [1] SHIM (0.18-MM THK)  
  121-7400 B [1] SHIM (0.08-MM THK)  
  121-7399 B [1] SHIM (0.05-MM THK)  
16. 8T-1580 [1] CUP-BEARING  
17. 4F-7952 [1] SEAL-O-RING  
18. 7T-2651 [1] STRAINER-SUCTION  
19. 9W-5460 [1] RING  
20. 7T-2646 [2] SPACER (66X79.5X2.02-MM THK)  
  6T-9166 B [2] SHIM (0.051-MM THK)  
  6T-9165 B [2] SHIM (0.076-MM THK)  
  6T-9163 B [2] SHIM (0.599-MM THK)  
  6T-9164 B [2] SHIM (0.178-MM THK)  
21. 147-0209 Y [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
22. 121-7396 [1] VALVE GP-RELIEF (CLUTCH 2 SOLENOID)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
23. 6T-9202 [2] PLUG  
24. 1U-8846 [1] SEALANT-GASKET  
25. 147-0221 [1] PLUG-VALVE  
26. 7W-3556 [8] WASHER (14.27X20.57X1.5-MM THK)  
27. 147-0234 [4] BOLT (9/16-18X0.83-IN)  
28. 147-0239 [1] PLUG-CUP  
29. 5P-8066 [1] SEAL-O-RING  
30. 6V-8097 M [2] BOLT (M12X1.75X30-MM)  
31. 7T-3195 [2] WASHER (12.3X47X6.35-MM THK)  
32. 122-6787 [1] YOKE AS  
  [1] GUARD  
33. 216-2267 [1] SEAL-LIP TYPE  
34. 121-7385 [1] PUMP GP-TRANSMISSION  
  124-6612 [1] SEAL-LIP TYPE  
35. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
36. 8C-5748 M [4] BOLT (M8X1.25X55-MM)  
37. 7X-4741 [1] SEAL  
38. 9S-4185 [3] PLUG (3/4-16-THD)  
39. 3K-0360 [3] SEAL-O-RING  
40. 123-8906 [3] CUP-TAPERED ROLLER  
41. 123-8905 [3] CONE-BEARING  
42. 121-0694 [2] WASHER-THRUST (40X70X4-MM THK)  
43. 172-5317 [6] BEARING-SPECIAL  
44. 123-8913 [2] BEARING-ROLLER  
45. 147-0224 [1] GEAR (45/32-TEETH)  
46. 8E-5707 [6] PLATE-END  
47. 6V-8757 [5] RING-RETAINING  
48. 274-4553 [37] DISC-CLUTCH  
49. 6Y-7929 [37] DISC-FRICTION  
50. 274-8638 [6] RING-RETAINING  
51. 121-2500 [4] WASHER-THRUST (50X70X4-MM THK)  
52. 147-0202 [2] GEAR (45/24-TEETH)  
53. 147-0257 [1] SHAFT AS-INPUT  
  123-2920 [3] PLUG  
54. 9U-8886 [4] RING-SEAL  
55. 123-8910 [1] CUP-TAPERED ROLLER  
56. 123-8909 [1] CONE-BEARING  
57. 7T-6655 [4] BEARING  
58. 147-0259 [2] SPACER (51.1X54.9X18.7-MM THK)  
59. 147-0238 [4] SPRING AS  
60. 6V-5100 [4] SEAL-O-RING  
61. 147-0228 [4] PISTON-CLUTCH  
62. 6T-9196 [6] SEAL  
63. 122-1886 [1] RING-SEAL  
64. 123-8907 [3] CONE-BEARING  
65. 123-8908 [3] CUP-TAPERED ROLLER  
66. 147-0212 [1] GEAR (42-TEETH)  
67. 147-0216 [1] GEAR (38-TEETH)  
68. 147-0203 [2] WASHER-THRUST (45.3X65X5-MM THK)  
69. 147-0258 [1] SPACER (46X50X16-MM THK)  
70. 147-0215 [1] GEAR (45/19-TEETH)  
71. 178-9566 [2] SPRING-PISTON  
72. 122-1877 [2] WASHER-THRUST (40X65X4-MM THK)  
73. 6Y-1192 [7] RING-SEAL  
74. 123-8912 [4] BEARING-ROLLER  
75. 9S-4191 [14] PLUG (9/16-18-THD)  
76. 147-0264 [1] GEAR (45/28-TEETH)  
77. 147-0260 [1] RETAINER-SPRING  
78. 095-0928 [1] RING-RETAINING  
79. 147-0205 [2] WASHER (55X78X5-MM THK)  
80. 147-0248 [1] SPACER (56.2X60X15.8-MM THK)  
81. 157-2090 [1] GEAR (38-TEETH)  
82. 173-0332 [1] SHAFT AS (COUNTERSHAFT)  
  163-9091 [1] PLUG  
83. 147-0242 [1] GEAR (48-TEETH)  
84. 150-3757 [2] BEARING  
85. 009-2062 [2] SEAL-O-RING  
86. 157-2088 [2] PISTON AS  
87. 147-0261 [1] SHAFT AS-OUTPUT (REAR)  
  9W-0717 [2] PLUG  
88. 095-0927 [1] RING-RETAINING  
89. 122-1879 [1] SPACER (58X67.5X2-MM THK)  
  104-3288 B [1] SHIM (0.05-MM THK)  
  121-2059 B [1] SHIM (0.08-MM THK)  
  121-2060 B [1] SHIM (0.18-MM THK)  
  121-2061 B [1] SHIM (0.6-MM THK)  
90. 121-4036 Y [1] VALVE GP-SOLENOID (TORQUE CONVERTER INLET)  
91. 106-9861 [1] PLATE AS-COVER  
92. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
93. 147-0236 [1] TUBE AS  
94. 147-0211 [1] ELBOW AS  
  3G-6927 [1] ADAPTER  
95. 6V-8335 M [16] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
96. 147-0262 [4] WASHER (19.1X24.1X1.5-MM THK)  
97. 147-0266 [2] BOLT (3/4-16X1.417-IN)  
98. 189-5746 Y [1] SENSOR GP-SPEED (MAGNETIC, LOW OUTPUT)  
99. 1V-6341 [1] SEAL  
100. 3J-1907 [14] SEAL-O-RING  
101. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
102. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
103. 205-9244 [4] PLUG  
104. 9X-6615 M [12] BOLT (M5X0.8X30-MM)  
105. 7T-3253 [2] DOWEL  
106. 7T-3251 [1] BREATHER  
107. 7X-4744 [1] SEAL-O-RING  
108. 147-0255 [1] HOUSING-SPRING  
109. 147-0206 [1] SPRING  
110. 2H-3698 [1] BALL  
111. 147-0256 [1] SHAFT AS-REVERSE  
  9W-0717 [1] PLUG  
  147-0270 [1] ORIFICE  
112. 147-0226 [1] TUBE AS  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28960212
 

147-0204: TRANSMISSION GP-POWER SHIFT

147-0204 TRANSMISSION GP-POWER SHIFT
S/N 1PR1599-1815; 2AR1604-1849
PART OF 142-4437 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT
i00735906 SEBP2896
1470204 TRANSMISSION GP-POWER SHIFT Parts scheme 1470204 TRANSMISSION GP-POWER SHIFT Parts scheme 1470204 TRANSMISSION GP-POWER SHIFT Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
7. 147-0218 [1] TUBE AS  
8. 148-8988 Y [2] VALVE GP-SOLENOID (FORWARD HIGH)  
9. 8C-8545 M [2] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
10. 120-9762 [5] SEAL-O-RING  
11. 148-8986 Y [1] VALVE GP-SOLENOID (REVERSE)  
12. 147-0253 [1] CASE AS-REAR  
  9W-0717 [11] PLUG  
13. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
14. 121-7402 B [1] SHIM (0.6-MM THK)  
15. 121-7401 B [1] SHIM (0.18-MM THK)  
16. 121-7400 B [1] SHIM (0.08-MM THK)  
17. 121-7399 B [1] SHIM (0.05-MM THK)  
18. 7T-2646 [2] SPACER (66X79.5X2.02-MM THK)  
19. 6T-9166 B [2] SHIM (0.051-MM THK)  
20. 6T-9165 B [2] SHIM (0.076-MM THK)  
21. 6T-9164 B [2] SHIM (0.178-MM THK)  
22. 122-1878 [1] RING-SEAL  
23. 147-0201 [1] TUBE AS  
24. 7W-3556 [12] WASHER (14.27X20.57X1.5-MM THK)  
25. 147-0234 [6] BOLT (9/16-18X0.83-IN)  
26. 1U-8846 B [1] SEALANT-GASKET  
27. 5P-8066 [2] SEAL-O-RING  
28. 6V-8097 M [3] BOLT (M12X1.75X30-MM)  
29. 7T-3195 [3] WASHER (12.3X47X6.35-MM THK)  
30. 122-6787 [2] YOKE AS  
    (EACH AS INCLUDES)
  [1] GUARD  
31. 8T-2193 [2] SEAL-LIP TYPE  
32. 121-7385 [1] PUMP GP-TRANSMISSION  
  124-6612 [1] SEAL-LIP TYPE  
33. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
34. 173-0332 [1] SHAFT AS (COUNTERSHAFT)  
  163-9091 [1] PLUG  
35. 7X-4741 [1] SEAL  
36. 9S-4185 [3] PLUG (3/4-16-THD)  
37. 3K-0360 [3] SEAL-O-RING  
38. 123-8906 [5] CUP-TAPERED ROLLER  
39. 123-8905 [5] CONE-BEARING  
40. 121-0694 [2] WASHER-THRUST (40X70X4-MM THK)  
41. 172-5317 [6] BEARING-SPECIAL  
42. 123-8913 [2] BEARING-ROLLER  
43. 147-0224 [1] GEAR (45/32-TEETH)  
44. 8E-5707 [7] PLATE-END  
45. 6V-8757 [6] RING-RETAINING  
46. 6T-9194 [45] PLATE  
47. 6Y-7929 [37] DISC-FRICTION  
48. 9U-8875 [6] RING-RETAINING  
49. 121-2500 [4] WASHER-THRUST (50X70X4-MM THK)  
50. 147-0202 [2] GEAR (45/24-TEETH)  
51. 147-0257 [1] SHAFT AS-INPUT  
  123-2920 [3] PLUG  
52. 9U-8886 [4] RING-SEAL  
53. 123-8910 [1] CUP-TAPERED ROLLER  
54. 123-8909 [1] CONE-BEARING  
55. 7T-6655 [4] BEARING  
56. 147-0259 [2] SPACER (51.1X54.9X18.7-MM THK)  
57. 147-0238 [5] SPRING AS  
58. 6V-5100 [5] SEAL-O-RING  
59. 147-0228 [4] PISTON-CLUTCH  
60. 6T-9196 [7] SEAL  
61. 122-1886 [1] RING-SEAL  
62. 123-8907 [3] CONE-BEARING  
63. 123-8908 [3] CUP-TAPERED ROLLER  
64. 147-0212 [1] GEAR (42-TEETH)  
65. 147-0216 [1] GEAR (38-TEETH)  
66. 147-0203 [3] WASHER-THRUST (45.3X65X5-MM THK)  
67. 147-0258 [1] SPACER (46X50X16-MM THK)  
68. 147-0215 [1] GEAR (45/19-TEETH)  
69. 172-6050 [6] BEARING-SPECIAL  
70. 122-1877 [3] WASHER-THRUST (40X65X4-MM THK)  
71. 6Y-1192 [7] RING-SEAL  
72. 123-8912 [6] BEARING-ROLLER  
73. 9S-4191 [14] PLUG (9/16-18-THD)  
74. 147-0264 [1] GEAR (45/28-TEETH)  
75. 147-0260 [1] RETAINER-SPRING (16.36MM ID)  
76. 095-0928 [1] RING-RETAINING  
77. 147-0205 [2] WASHER (55X78X5-MM THK)  
78. 147-0248 [1] SPACER (56.2X60X15.8-MM THK)  
79. 157-2090 [1] GEAR (38-TEETH)  
80. 172-6743 [2] BEARING-SPECIAL  
81. 147-0242 [1] GEAR (48-TEETH)  
82. 150-3757 [2] BEARING  
83. 009-2062 [2] SEAL-O-RING  
84. 157-2088 [2] PISTON AS  
85. 147-0261 [1] SHAFT AS-OUTPUT (REAR)  
  9W-0717 [2] PLUG  
86. 095-0927 [1] RING-RETAINING  
87. 122-1884 [1] SPACER (45X49X8-MM THK)  
88. 147-0210 [1] GEAR (45/36-TEETH)  
89. 147-0207 [1] SHAFT AS-OUTPUT (FRONT)  
90. 122-1879 [2] SPACER (58X67.5X2-MM THK)  
91. 104-3288 B [2] SHIM (0.05-MM THK)  
92. 121-2059 B [2] SHIM (0.08-MM THK)  
93. 121-2060 B [2] SHIM (0.18-MM THK)  
94. 121-2061 B [2] SHIM (0.6-MM THK)  
95. 147-0211 [1] ELBOW AS  
  3G-6927 [1] ADAPTER  
96. 6Y-7957 [8] DISC-FRICTION  
97. 147-0227 [1] PISTON-CLUTCH  
98. 6V-8335 M [16] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
99. 147-0262 [4] WASHER (19.1X24.1X1.5-MM THK)  
100. 147-0266 [2] BOLT (3/4-16X1.417-IN)  
101. 6V-2455 [1] SENSOR GP-SPEED  
  102-8802 J [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 J [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 BE SLEEVE  
102. 1V-6341 [1] SEAL  
103. 3J-1907 [14] SEAL-O-RING  
104. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
105. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
106. 147-0232 [4] PLUG  
107. 9X-6615 M [12] BOLT (M5X0.8X30-MM)  
108. 7T-3253 [2] DOWEL  
109. 7T-3251 [1] BREATHER  
110. 7X-4744 [1] SEAL-O-RING  
111. 147-0255 [1] HOUSING-SPRING  
112. 147-0206 [1] SPRING  
113. 2H-3698 [1] BALL  
114. 147-0256 [1] SHAFT AS-REVERSE  
  9W-0717 [1] PLUG  
  147-0270 [1] ORIFICE  
115. 147-0226 [1] TUBE AS  
116. 147-0236 [1] TUBE AS  
117. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
118. 106-9861 [1] PLATE AS-COVER  
119. 121-4036 Y [2] VALVE GP-SOLENOID (TORQUE CONVERTER INLET)  
120. 6T-9202 [2] PLUG  
121. 121-7396 [1] VALVE GP-RELIEF (CLUTCH 2 SOLENOID)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
122. 147-0209 Y [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
123. 9W-5460 [1] RING  
124. 7T-2651 [1] STRAINER-SUCTION  
125. 4F-7952 [1] SEAL-O-RING  
126. 8T-1580 [1] CUP-BEARING  
127. 8T-0271 M [2] BOLT-SOCKET HEAD (M10X1.5X35-MM)  
128. 150-7732 [2] SEAL-O-RING  
129. 8T-1581 [1] BEARING-TAPERED ROLLER  
130. 6T-9163 B [2] SHIM (0.599-MM THK)  
131. 119-4740 [1] FILTER-OIL (STANDARD EFFICIENCY)  
132. 147-0245 [1] CASE AS-FRONT  
  9W-0717 [4] PLUG  
  147-0268 [4] PLUG  
133. 161-3249 [1] RING-RETAINING  
134. 8C-5748 M [4] BOLT (M8X1.25X55-MM)  
135. 178-9566 [2] SPRING-PISTON  
136. 122-1883 [1] SPACER (38X45X5-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28960213
 

147-0204: TRANSMISSION GP-POWER SHIFT

147-0204 TRANSMISSION GP-POWER SHIFT
S/N 1PR1599-1815; 2AR1850-1850
PART OF 142-4437 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT
i01346339 SEBP2896
1470204 TRANSMISSION GP-POWER SHIFT Parts scheme 1470204 TRANSMISSION GP-POWER SHIFT Parts scheme 1470204 TRANSMISSION GP-POWER SHIFT Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
7. 147-0218 [1] TUBE AS  
8. 148-8988 Y [2] VALVE GP-SOLENOID (FORWARD HIGH)  
9. 8C-8545 M [2] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
10. 120-9762 [5] SEAL-O-RING  
11. 148-8986 Y [1] VALVE GP-SOLENOID (REVERSE)  
12. 147-0253 [1] CASE AS-REAR  
  9W-0717 [11] PLUG  
13. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
14. 121-7402 B [1] SHIM (0.6-MM THK)  
15. 121-7401 B [1] SHIM (0.18-MM THK)  
16. 121-7400 B [1] SHIM (0.08-MM THK)  
17. 121-7399 B [1] SHIM (0.05-MM THK)  
18. 7T-2646 [2] SPACER (66X79.5X2.02-MM THK)  
19. 6T-9166 B [2] SHIM (0.051-MM THK)  
20. 6T-9165 B [2] SHIM (0.076-MM THK)  
21. 6T-9164 B [2] SHIM (0.178-MM THK)  
22. 122-1878 [1] RING-SEAL  
23. 147-0201 [1] TUBE AS  
24. 7W-3556 [12] WASHER (14.27X20.57X1.5-MM THK)  
25. 147-0234 [6] BOLT (9/16-18X0.83-IN)  
26. 1U-8846 B [1] SEALANT-GASKET  
27. 5P-8066 [2] SEAL-O-RING  
28. 6V-8097 M [3] BOLT (M12X1.75X30-MM)  
29. 7T-3195 [3] WASHER (12.3X47X6.35-MM THK)  
30. 122-6787 [2] YOKE AS  
    (EACH AS INCLUDES)
  [1] GUARD  
31. 8T-2193 [2] SEAL-LIP TYPE  
32. 121-7385 [1] PUMP GP-TRANSMISSION  
  124-6612 [1] SEAL-LIP TYPE  
33. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
34. 173-0332 [1] SHAFT AS (COUNTERSHAFT)  
  163-9091 [1] PLUG  
35. 7X-4741 [1] SEAL  
36. 9S-4185 [3] PLUG (3/4-16-THD)  
37. 3K-0360 [3] SEAL-O-RING  
38. 123-8906 [5] CUP-TAPERED ROLLER  
39. 123-8905 [5] CONE-BEARING  
40. 121-0694 [2] WASHER-THRUST (40X70X4-MM THK)  
41. 172-5317 [6] BEARING-SPECIAL  
42. 123-8913 [2] BEARING-ROLLER  
43. 147-0224 [1] GEAR (45/32-TEETH)  
44. 8E-5707 [7] PLATE-END  
45. 6V-8757 [6] RING-RETAINING  
46. 6T-9194 [45] PLATE  
47. 6Y-7929 [37] DISC-FRICTION  
48. 9U-8875 [6] RING-RETAINING  
49. 121-2500 [4] WASHER-THRUST (50X70X4-MM THK)  
50. 147-0202 [2] GEAR (45/24-TEETH)  
51. 147-0257 [1] SHAFT AS-INPUT  
  123-2920 [3] PLUG  
52. 9U-8886 [4] RING-SEAL  
53. 123-8910 [1] CUP-TAPERED ROLLER  
54. 123-8909 [1] CONE-BEARING  
55. 7T-6655 [4] BEARING  
56. 147-0259 [2] SPACER (51.1X54.9X18.7-MM THK)  
57. 147-0238 [5] SPRING AS  
58. 6V-5100 [5] SEAL-O-RING  
59. 147-0228 [4] PISTON-CLUTCH  
60. 6T-9196 [7] SEAL  
61. 122-1886 [1] RING-SEAL  
62. 123-8907 [3] CONE-BEARING  
63. 123-8908 [3] CUP-TAPERED ROLLER  
64. 147-0212 [1] GEAR (42-TEETH)  
65. 147-0216 [1] GEAR (38-TEETH)  
66. 147-0203 [3] WASHER-THRUST (45.3X65X5-MM THK)  
67. 147-0258 [1] SPACER (46X50X16-MM THK)  
68. 147-0215 [1] GEAR (45/19-TEETH)  
69. 172-6050 [6] BEARING-SPECIAL  
70. 122-1877 [3] WASHER-THRUST (40X65X4-MM THK)  
71. 6Y-1192 [7] RING-SEAL  
72. 123-8912 [6] BEARING-ROLLER  
73. 9S-4191 [14] PLUG (9/16-18-THD)  
74. 147-0264 [1] GEAR (45/28-TEETH)  
75. 147-0260 [1] RETAINER-SPRING (16.36MM ID)  
76. 095-0928 [1] RING-RETAINING  
77. 147-0205 [2] WASHER (55X78X5-MM THK)  
78. 147-0248 [1] SPACER (56.2X60X15.8-MM THK)  
79. 157-2090 [1] GEAR (38-TEETH)  
80. 172-6743 [2] BEARING-SPECIAL  
81. 147-0242 [1] GEAR (48-TEETH)  
82. 150-3757 [2] BEARING  
83. 009-2062 [2] SEAL-O-RING  
84. 157-2088 [2] PISTON AS  
85. 147-0261 [1] SHAFT AS-OUTPUT (REAR)  
  9W-0717 [2] PLUG  
86. 095-0927 [1] RING-RETAINING  
87. 122-1884 [1] SPACER (45X49X8-MM THK)  
88. 147-0210 [1] GEAR (45/36-TEETH)  
89. 147-0207 [1] SHAFT AS-OUTPUT (FRONT)  
90. 122-1879 [2] SPACER (58X67.5X2-MM THK)  
91. 104-3288 B [2] SHIM (0.05-MM THK)  
92. 121-2059 B [2] SHIM (0.08-MM THK)  
93. 121-2060 B [2] SHIM (0.18-MM THK)  
94. 121-2061 B [2] SHIM (0.6-MM THK)  
95. 147-0211 [1] ELBOW AS  
  3G-6927 [1] ADAPTER  
96. 6Y-7957 [8] DISC-FRICTION  
97. 147-0227 [1] PISTON-CLUTCH  
98. 6V-8335 M [16] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
99. 147-0262 [4] WASHER (19.1X24.1X1.5-MM THK)  
100. 147-0266 [2] BOLT (3/4-16X1.417-IN)  
101. 6V-2455 [1] SENSOR GP-SPEED  
  102-8802 J [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 J [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 BE SLEEVE  
102. 1V-6341 [1] SEAL  
103. 3J-1907 [14] SEAL-O-RING  
104. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
105. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
106. 147-0232 [4] PLUG  
107. 9X-6615 M [12] BOLT (M5X0.8X30-MM)  
108. 7T-3253 [2] DOWEL  
109. 7T-3251 [1] BREATHER  
110. 7X-4744 [1] SEAL-O-RING  
111. 147-0255 [1] HOUSING-SPRING  
112. 147-0206 [1] SPRING  
113. 2H-3698 [1] BALL  
114. 147-0256 [1] SHAFT AS-REVERSE  
  9W-0717 [1] PLUG  
  147-0270 [1] ORIFICE  
115. 147-0226 [1] TUBE AS  
116. 147-0236 [1] TUBE AS  
117. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
118. 106-9861 [1] PLATE AS-COVER  
119. 121-4036 Y [2] VALVE GP-SOLENOID (TORQUE CONVERTER INLET)  
120. 6T-9202 [2] PLUG  
121. 121-7396 [1] VALVE GP-RELIEF (CLUTCH 2 SOLENOID)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
122. 147-0209 Y [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
123. 9W-5460 [1] RING  
124. 7T-2651 [1] STRAINER-SUCTION  
125. 4F-7952 [1] SEAL-O-RING  
126. 8T-1580 [1] CUP-BEARING  
127. 8T-0271 M [2] BOLT-SOCKET HEAD (M10X1.5X35-MM)  
128. 150-7732 [2] SEAL-O-RING  
129. 8T-1581 [1] BEARING-TAPERED ROLLER  
130. 6T-9163 B [2] SHIM (0.599-MM THK)  
131. 1R-0772 [1] FILTER ELEMENT AS-OIL (HYDRAULIC)  
132. 147-0245 [1] CASE AS-FRONT  
  9W-0717 [4] PLUG  
  147-0268 [4] PLUG  
133. 161-3249 [1] RING-RETAINING  
134. 8C-5748 M [4] BOLT (M8X1.25X55-MM)  
135. 178-9566 [2] SPRING-PISTON  
136. 122-1883 [1] SPACER (38X45X5-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28960214
 

147-0204: TRANSMISSION GP-POWER SHIFT

147-0204 TRANSMISSION GP-POWER SHIFT
S/N 1PR1599-1815; 2AR1851-1874
PART OF 142-4437 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT
i01346350 SEBP2896
1470204 TRANSMISSION GP-POWER SHIFT Parts scheme 1470204 TRANSMISSION GP-POWER SHIFT Parts scheme 1470204 TRANSMISSION GP-POWER SHIFT Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
7. 147-0218 [1] TUBE AS  
8. 148-8988 Y [2] VALVE GP-SOLENOID (FORWARD HIGH)  
9. 8C-8545 M [2] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
10. 120-9762 [5] SEAL-O-RING  
11. 238-1966 Y [1] VALVE GP-SOLENOID (REVERSE)  
12. 147-0253 [1] CASE AS-REAR  
  9W-0717 [11] PLUG  
13. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
14. 121-7402 B [1] SHIM (0.6-MM THK)  
15. 121-7401 B [1] SHIM (0.18-MM THK)  
16. 121-7400 B [1] SHIM (0.08-MM THK)  
17. 121-7399 B [1] SHIM (0.05-MM THK)  
18. 7T-2646 [2] SPACER (66X79.5X2.02-MM THK)  
19. 6T-9166 B [2] SHIM (0.051-MM THK)  
20. 6T-9165 B [2] SHIM (0.076-MM THK)  
21. 6T-9164 B [2] SHIM (0.178-MM THK)  
22. 122-1878 [1] RING-SEAL  
23. 147-0201 [1] TUBE AS  
24. 7W-3556 [12] WASHER (14.27X20.57X1.5-MM THK)  
25. 147-0234 [6] BOLT (9/16-18X0.83-IN)  
26. 1U-8846 B [1] SEALANT-GASKET  
27. 5P-8066 [2] SEAL-O-RING  
28. 6V-8097 M [3] BOLT (M12X1.75X30-MM)  
29. 7T-3195 [3] WASHER (12.3X47X6.35-MM THK)  
30. 122-6787 [2] YOKE AS  
    (EACH AS INCLUDES)
  [1] GUARD  
31. 216-2267 [2] SEAL-LIP TYPE  
32. 121-7385 [1] PUMP GP-TRANSMISSION  
  124-6612 [1] SEAL-LIP TYPE  
33. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
34. 173-0332 [1] SHAFT AS (COUNTERSHAFT)  
  163-9091 [1] PLUG  
35. 7X-4741 [1] SEAL  
36. 9S-4185 [3] PLUG (3/4-16-THD)  
37. 3K-0360 [3] SEAL-O-RING  
38. 123-8906 [5] CUP-TAPERED ROLLER  
39. 123-8905 [5] CONE-BEARING  
40. 121-0694 [2] WASHER-THRUST (40X70X4-MM THK)  
41. 172-5317 [6] BEARING-SPECIAL  
42. 123-8913 [2] BEARING-ROLLER  
43. 147-0224 [1] GEAR (45/32-TEETH)  
44. 8E-5707 [7] PLATE-END  
45. 6V-8757 [6] RING-RETAINING  
46. 6T-9194 [45] PLATE  
47. 6Y-7929 [37] DISC-FRICTION  
48. 274-8638 [6] RING-RETAINING  
49. 121-2500 [4] WASHER-THRUST (50X70X4-MM THK)  
50. 147-0202 [2] GEAR (45/24-TEETH)  
51. 147-0257 [1] SHAFT AS-INPUT  
  123-2920 [3] PLUG  
52. 9U-8886 [4] RING-SEAL  
53. 123-8910 [1] CUP-TAPERED ROLLER  
54. 123-8909 [1] CONE-BEARING  
55. 7T-6655 [4] BEARING  
56. 147-0259 [2] SPACER (51.1X54.9X18.7-MM THK)  
57. 147-0238 [5] SPRING AS  
58. 6V-5100 [5] SEAL-O-RING  
59. 147-0228 [4] PISTON-CLUTCH  
60. 6T-9196 [7] SEAL  
61. 122-1886 [1] RING-SEAL  
62. 123-8907 [3] CONE-BEARING  
63. 123-8908 [3] CUP-TAPERED ROLLER  
64. 147-0212 [1] GEAR (42-TEETH)  
65. 147-0216 [1] GEAR (38-TEETH)  
66. 147-0203 [3] WASHER-THRUST (45.3X65X5-MM THK)  
67. 147-0258 [1] SPACER (46X50X16-MM THK)  
68. 147-0215 [1] GEAR (45/19-TEETH)  
69. 172-6050 [6] BEARING-SPECIAL  
70. 122-1877 [3] WASHER-THRUST (40X65X4-MM THK)  
71. 6Y-1192 [7] RING-SEAL  
72. 123-8912 [6] BEARING-ROLLER  
73. 9S-4191 [14] PLUG (9/16-18-THD)  
74. 147-0264 [1] GEAR (45/28-TEETH)  
75. 147-0260 [1] RETAINER-SPRING (16.36MM ID)  
76. 095-0928 [1] RING-RETAINING  
77. 147-0205 [2] WASHER (55X78X5-MM THK)  
78. 147-0248 [1] SPACER (56.2X60X15.8-MM THK)  
79. 157-2090 [1] GEAR (38-TEETH)  
80. 172-6743 [2] BEARING-SPECIAL  
81. 147-0242 [1] GEAR (48-TEETH)  
82. 150-3757 [2] BEARING  
83. 009-2062 [2] SEAL-O-RING  
84. 157-2088 [2] PISTON AS  
85. 147-0261 [1] SHAFT AS-OUTPUT (REAR)  
  9W-0717 [2] PLUG  
86. 095-0927 [1] RING-RETAINING  
87. 122-1884 [1] SPACER (45X49X8-MM THK)  
88. 147-0210 [1] GEAR (45/36-TEETH)  
89. 147-0207 [1] SHAFT AS-OUTPUT (FRONT)  
90. 122-1879 [2] SPACER (58X67.5X2-MM THK)  
91. 104-3288 B [2] SHIM (0.05-MM THK)  
92. 121-2059 B [2] SHIM (0.08-MM THK)  
93. 121-2060 B [2] SHIM (0.18-MM THK)  
94. 121-2061 B [2] SHIM (0.6-MM THK)  
95. 147-0211 [1] ELBOW AS  
  3G-6927 [1] ADAPTER  
96. 6Y-7957 [8] DISC-FRICTION  
97. 147-0227 [1] PISTON-CLUTCH  
98. 6V-8335 M [16] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
99. 147-0262 [4] WASHER (19.1X24.1X1.5-MM THK)  
100. 147-0266 [2] BOLT (3/4-16X1.417-IN)  
101. 189-5746 Y [1] SENSOR GP-SPEED (TRANSMISSION OUTPUT)  
102. 1V-6341 [1] SEAL  
103. 3J-1907 [14] SEAL-O-RING  
104. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
105. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
106. 205-9244 [4] PLUG  
107. 9X-6615 M [12] BOLT (M5X0.8X30-MM)  
108. 7T-3253 [2] DOWEL  
109. 7T-3251 [1] BREATHER  
110. 7X-4744 [1] SEAL-O-RING  
111. 147-0255 [1] HOUSING-SPRING  
112. 147-0206 [1] SPRING  
113. 2H-3698 [1] BALL  
114. 147-0256 [1] SHAFT AS-REVERSE  
  9W-0717 [1] PLUG  
  147-0270 [1] ORIFICE  
115. 147-0226 [1] TUBE AS  
116. 147-0236 [1] TUBE AS  
117. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
118. 106-9861 [1] PLATE AS-COVER  
119. 121-4036 Y [2] VALVE GP-SOLENOID (TORQUE CONVERTER INLET)  
120. 6T-9202 [2] PLUG  
121. 121-7396 [1] VALVE GP-RELIEF (CLUTCH 2 SOLENOID)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
122. 147-0209 Y [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
123. 9W-5460 [1] RING  
124. 7T-2651 [1] STRAINER-SUCTION  
125. 4F-7952 [1] SEAL-O-RING  
126. 8T-1580 [1] CUP-BEARING  
127. 8T-0271 M [2] BOLT-SOCKET HEAD (M10X1.5X35-MM)  
128. 150-7732 [2] SEAL-O-RING  
129. 8T-1581 [1] BEARING-TAPERED ROLLER  
130. 6T-9163 B [2] SHIM (0.599-MM THK)  
131. 119-4740 [1] FILTER-OIL (STANDARD EFFICIENCY)  
132. 147-0245 [1] CASE AS-FRONT  
  9W-0717 [4] PLUG  
  147-0268 [4] PLUG  
133. 161-3249 [1] RING-RETAINING  
134. 8C-5748 M [4] BOLT (M8X1.25X55-MM)  
135. 178-9566 [2] SPRING-PISTON  
136. 121-0885 [1] RETAINER  
137. 122-1883 [1] SPACER (38X45X5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28960215
 

147-0209: VALVE GP-RELIEF

147-0209 VALVE GP-RELIEF
S/N 1PR1599-1815; 2AR1604-1874
PART OF 147-0200, 147-0204 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT
i00700237 SEBP2896
1470209 VALVE GP-RELIEF Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-4744 [1] SEAL-O-RING  
2. 6V-9178 [1] SEAL-O-RING  
3. 106-9586 [1] SEAL-O-RING  
 

#SEBP28960216
 

121-4036: VALVE GP-SOLENOID

121-4036 VALVE GP-SOLENOID
S/N 1PR1599-1815; 2AR1604-1874
12-VOLT,TORQUE CONVERTER INLET
PART OF 111-7814 TRANSMISSION GP-DIRECT DRIVE, 147-0200, 147-0204 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT
i00200939 SEBP2896
1214036 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-9196 [1] NUT-JAM (1/2-20-THD)  
2. 122-1672 [1] CARTRIDGE AS  
3. 130-0013 [1] COIL AS  
4. 1S-9593 [2] STRAP-CABLE  
5. 3E-3362 [1] WEDGE-PLUG LOCK (2-PIN)  
6. 186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
7. 155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
   
    AVAILABLE REPAIR KIT(S):
  122-1135 [1] KIT-SEAL  
    (INCLUDES RINGS & SEALS)
 

#SEBP28960217
 

142-1468: VALVE GP-SOLENOID

142-1468 VALVE GP-SOLENOID
S/N 1PR1599-1815; 2AR1604-1874
12 VOLT DIRECT CURRENT
PART OF 111-7814, 111-7815 TRANSMISSION GP-DIRECT DRIVE
Type 1
AN ATTACHMENT
i00629557 SEBP2896
1421468 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-2911 [1] COIL AS (12-VOLT)(FORWARD)  
  1S-9593 [2] STRAP-CABLE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 130-0912 [1] COIL AS (12-VOLT)(REVERSE)  
  1S-9593 [2] STRAP-CABLE  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
3. 061-8639 [2] SEAL-O-RING  
4. 8L-2779 [4] SEAL-O-RING  
5. 143-4988 [2] LOCKNUT  
6. 143-6227 [1] PLUG-ORIFICE  
7. 143-4655 [2] WASHER (18.3X24.8X0.8-MM THK)  
 

#SEBP28960218
 

142-1468: VALVE GP-SOLENOID

142-1468 VALVE GP-SOLENOID
S/N 1PR1599-1815; 2AR1604-1874
12 VOLT DIRECT CURRENT
PART OF 111-7814, 111-7815 TRANSMISSION GP-DIRECT DRIVE
Type 2
AN ATTACHMENT
i01532725 SEBP2896
1421468 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-2911 [1] COIL AS (12-VOLT)(FORWARD)  
  1S-9593 [2] STRAP-CABLE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 130-0912 [1] COIL AS (12-VOLT)(REVERSE)  
  1S-9593 [2] STRAP-CABLE  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
3. 061-8639 [2] SEAL-O-RING  
4. 8L-2779 [4] SEAL-O-RING  
5. 202-0040 [2] LOCKNUT (11/16-27-THD)  
6. 143-6227 [1] PLUG-ORIFICE  
7. 143-4655 [2] WASHER (18.3X24.8X0.8-MM THK)  
 

#SEBP28960219
 

148-8986: VALVE GP-SOLENOID

148-8986 VALVE GP-SOLENOID
S/N 1PR1599-1815; 2AR1604-1874
PART OF 147-0200, 147-0204 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT
i00700246 SEBP2896
1488986 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 436C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-2911 [1] COIL AS (12-VOLT)  
  1S-9593 [2] STRAP-CABLE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 061-8639 [2] SEAL-O-RING  
3. 8L-2779 [4] SEAL-O-RING  
4. 202-0040 [1] LOCKNUT (11/16-27-THD)  
5. 150-4932 [1] PLUG-ORIFICE  
6. 143-4655 [1] WASHER (18.3X24.8X0.8-MM THK)  
 

Information:

Operation and Maintenance Manual
Fifth Gear Lockout Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Transmission Magnetic Screen - Clean
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Transmission Oil - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Transmission Oil Level - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Bench Test Procedure for a 416C, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, and 442D Backhoe Loader Powershift Transmission {3030, 3174}
Bench Test Procedure for a 416C, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, and 442D Backhoe Loader Powershift Transmission {3030, 3174}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Technical Information Bulletin
Transmission May Remain In Neutral Following Operation Of The Neutralizer Push Button Switch
Transmission May Remain In Neutral Following Operation Of The Neutralizer Push Button Switch
Bearing Part Number Listed Incorrectly For Transmissions
Bearing Part Number Listed Incorrectly For Transmissions
Direct Drive Transmission Front Output (All Wheel Dirve) Shaft Failures
Direct Drive Transmission Front Output (All Wheel Dirve) Shaft Failures
Transmission Controls (Shift Lever) May Fail
Transmission Controls (Shift Lever) May Fail
Specifications
Torque Converter<BR> 111-7808
416C, 426C, 428C, 436C & 438C BACKHOE LOADERS TRANSMISSION
Transmission
416C, 426C, 428C, 436C & 438C BACKHOE LOADERS TRANSMISSION
Introduction
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT
Transmission
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Systems Operation
Systems Operation
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Testing and Adjusting
Testing And Adjusting
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT
Bench Test Procedures
Bench Test Procedure for a 416C, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, and 442D Backhoe Loader Powershift Transmission {3030, 3174}
Bench Test Procedure for a 416C, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, and 442D Backhoe Loader Powershift Transmission {3030, 3174}
Bench Test Procedure For A 416C, 416D, 420D, 424D, 426C, 428D, 430D, 432D, 436C, 438D, and 442D Backhoe Loader Transmission (Standard Shift) {3030, 3174}
Bench Test Procedure For A 416C, 416D, 420D, 424D, 426C, 428D, 430D, 432D, 436C, 438D, and 442D Backhoe Loader Transmission (Standard Shift) {3030, 3174}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Engine, Torque Converter, Transmission &amp; Implement Pump
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC
Engine &amp; Transmission
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC
Solenoid Valve (Transmission)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Transmission (Direct Drive) (If Equipped)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Transmission (Direct Drive) (If Equipped)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Transmission (Powershift) (If Equipped)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Transmission (Powershift) (If Equipped)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Engine, Torque Converter &amp; Transmission
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Engine &amp; Transmission
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Service Magazine
C-Series Backhoe Loaders Are Being Updated {1000,0685,0720,1001,1013,1350,3030,7950}
1998/01/26
Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08
Use 152-7055 Spring Compressor For Disassembly And Assembly Of Transmission Clutch Shaft Assemblies {3150}
1998/10/05
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Assembling The Transmission Thrust Bearings For Backhoe Loaders {3030}
1999/06/28
Seals for the Relief Valves on the Transmission {5117}
2001/06/04
New Lip Seals Are Used in the Transmission {3030, 3066}
2003/09/08
A New Shaft Assembly Is Now Used {3030}
2003/10/20
A New Torque Converter Is Now Used {3101}
2004/06/28
An Improved Gear Is Now Used in Transmissions {3030}
2004/07/05
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog 436C :

TRANSMISSION GP-POWER SHIFT
147-0200 TRANSMISSION GP-POWER SHIFT
TRANSMISSION GP-DIRECT DRIVE
111-7815 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7815 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7815 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7814 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7814 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7814 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7814 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-POWER SHIFT
147-0200 TRANSMISSION GP-POWER SHIFT
TRANSMISSION GP-POWER SHIFT
147-0204 TRANSMISSION GP-POWER SHIFT
TRANSMISSION GP-POWER SHIFT
147-0204 TRANSMISSION GP-POWER SHIFT
TRANSMISSION GP-POWER SHIFT
147-0204 TRANSMISSION GP-POWER SHIFT
VALVE GP-RELIEF
147-0209 VALVE GP-RELIEF
VALVE GP-SOLENOID
121-4036 VALVE GP-SOLENOID
VALVE GP-SOLENOID
142-1468 VALVE GP-SOLENOID
VALVE GP-SOLENOID
142-1468 VALVE GP-SOLENOID

Truck sale:

CATERPILLAR 436C 2000
 
CATERPILLAR 436C 2000
- BACKHOE LOADERS
WAGNER EQUIPMENT CO
United States
1999 CAT 436C
Call 
1999 CAT 436C

WORKING MACHINES S.A. DE C.V.
San Juan De Los Lagos, Jalisco, Mexico
2000 CAT 436C
USD $23,800 
2000 CAT 436C

Iron2sell.com
1992 CAT 436C
Call 
1992 CAT 436C

JERSEY RENTS INC
Bayville, New Jersey
1999 CAT 436C
USD $29,000 
1999 CAT 436C

Equipment Pros
Baltimore, Maryland
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.