BASIC ENGINE
PISTON & ROD GPCYLINDER BLOCK GP
PULLEY GP
VALVE MECHANISM GP
CRANKSHAFT GP
LUBRICATION SYSTEM
BREATHER GPCOOLING SYSTEM
COOLER GPLUBRICATION SYSTEM
FUMES DISPOSAL GPGAUGE GP-OIL LEVEL (DIPSTICK)
BASIC ENGINE
PISTON & ROD GP#SEBP28980040
147-9592: PISTON & ROD GP
147-9592 PISTON & ROD GP
S/N 6JK1933-UP
17:1 RATIO
PART OF 149-1156 ENGINE AR-CORE
Type 2
S/N 6JK1933-UP
17:1 RATIO
PART OF 149-1156 ENGINE AR-CORE
Type 2
Parts for your 580 WHEEL HARVESTER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 133-4983 | [1] | CROWN AS-PISTON | |
| 2. | 132-5246 | [1] | RING-PISTON (TOP) | |
| 3. | 197-9277 | [1] | RING-PISTON (INTERMEDIATE) | |
| 4. | 107-7566 | [1] | RING-PISTON (OIL CONTROL) | |
| 5. | 7C-0111 | [2] | RETAINER-PIN | |
| 6. | 168-7226 | [1] | PIN-PISTON | |
| 7. | 213-3193 | [1] | ROD AS-CONNECTING (NON-DRILLED) | |
| 7A. | 2W-0027 | [1] | BEARING (EYE END) | |
| 7B. | 195-0321 | [2] | BOLT | |
| 8. | 7W-9415 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 7C-6976 A | [1] | BEARING-CONNECTING ROD (.25MM US) | ||
| 7C-6977 A | [1] | BEARING-CONNECTING ROD (.5MM US) | ||
| 9. | 187-1513 | [1] | SKIRT-PISTON | |
| 10. | 135-5970 | [1] | TUBE AS-PISTON COOLING JET | |
| 11. | 6V-3940 M | [1] | BOLT (M8X1.25X25MM) | |
| A | NOT PART OF THIS GROUP | |||
| M | METRIC PART | |||
| R | REMFG PART MAY BE AVAILABLE | |||
#SEBP28980041
156-0228: PLUG GP-CYLINDER BLOCK
Parts for your 580 WHEEL HARVESTER:
CATERPILLAR SIS#SEBP28980042
4W-5429: PULLEY GP-CRANKSHAFT
Parts for your 580 WHEEL HARVESTER:
CATERPILLAR SIS#SEBP28980043
153-3979: PULLEY GP-FAN
Parts for your 580 WHEEL HARVESTER:
CATERPILLAR SIS#SEBP28980044
107-7722: ROCKER ARM GP
Parts for your 580 WHEEL HARVESTER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9Y-4832 M | [2] | SCREW-VALVE ADJUSTMENT (M10X1.5X38MM) | |
| 2. | 2Y-5829 M | [2] | NUT (M10X1.5 THD) | |
| 3. | 4P-7790 | [1] | SHAFT AS-ARM | |
| 3A. | 2D-6642 | [1] | BALL | |
| 3B. | 7M-5130 | [1] | PIN-SPRING | |
| 3C. | 7W-4137 | [1] | SHAFT AS | |
| 3D. | 0L-1026 | [1] | PLUG-CUP | |
| 4. | 9Y-8534 | [1] | SUPPORT-SHAFT | |
| 5. | 105-1776 | [1] | ARM AS-UNIT INJECTOR | |
| 6. | 7W-4117 M | [1] | NUT | |
| 7. | 9Y-4973 | [1] | SCREW-INJECTION ADJUSTMENT | |
| 8. | 7W-3983 | [1] | RING-RETAINING | |
| 9. | 9Y-1582 | [1] | BUTTON-ARM | |
| 10. | 6I-0924 | [2] | ROCKER ARM AS | |
| (EACH INCLUDES) | ||||
| 10A. | [1] | SEAT-WEAR | ||
| M | METRIC PART | |||
| R | REMFG PART MAY BE AVAILABLE | |||
#SEBP28980045
115-4203: SEAL GP-CRANKSHAFT
Parts for your 580 WHEEL HARVESTER:
CATERPILLAR SIS#SEBP28980046
139-3527: BREATHER GP
Parts for your 580 WHEEL HARVESTER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2W-9162 | [1] | BREATHER AS (ENGINE) | |
| 2. | 4L-9564 | [1] | SEAL-O-RING (81.92MM ID) | |
| 3. | 6V-3821 M | [1] | BOLT (M8X1.25X110MM) | |
| 4. | 9N-0869 | [1] | WASHER (2MM THK) | |
| 5. | 6V-5218 M | [2] | BOLT (M8X1.25X35MM) | |
| 6. | 9M-1974 | [2] | WASHER-HARD (2MM THK) | |
| 7. | 4P-9936 | [1] | BASE | |
| 8. | 7C-1159 | [1] | GASKET | |
| M | METRIC PART | |||
#SEBP28980047
4P-8183: FILTER GP-ENGINE OIL
Parts for your 580 WHEEL HARVESTER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1R-0739 | [1] | FILTER AS-ENGINE OIL | |
| 2. | 8T-0276 BM | [5] | BOLT (M8X1.25X45MM)(MARKED X) | |
| 3. | 9M-1974 B | [15] | WASHER-HARD (2MM THK) | |
| 4. | 6V-2317 M | [10] | BOLT (M8X1.25X30MM) | |
| 5. | 7C-1493 | [2] | VALVE-BYPASS | |
| 6. | 9L-9188 | [2] | SPRING-VALVE | |
| 7. | 2M-9780 | [2] | SEAL-O-RING (19.18MM ID) | |
| 8. | 5P-8196 | [2] | PLUG-O-RING | |
| 9. | 4P-8182 | [1] | BASE AS-OIL FILTER | |
| 2P-2537 | [1] | STUD-HOLLOW | ||
| 10. | 179-9360 | [1] | GASKET | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP28980048
4P-1556: FUMES DISPOSAL GP
#SEBP28980049
153-0453: GAUGE GP-OIL LEVEL (DIPSTICK)
153-0453 GAUGE GP-OIL LEVEL (DIPSTICK)
S/N 6JK1933-UP
PART OF 149-1155 ENGINE AR
S/N 6JK1933-UP
PART OF 149-1155 ENGINE AR
Parts for your 580 WHEEL HARVESTER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9Y-8236 | [1] | TUBE AS-GUIDE | |
| 2. | 112-9100 | [1] | GAUGE-OIL LEVEL (DIPSTICK) | |
| 3. | 5P-7970 M | [1] | NUT (M8X1.25 THD) | |
| 4. | 6V-8212 M | [1] | BOLT (M10X1.50X16MM) | |
| 5. | 6V-5839 | [1] | WASHER (2.5MM THK) | |
| 6. | 9M-1974 | [2] | WASHER-HARD (2MM THK) | |
| 7. | 6V-5215 M | [1] | BOLT (M8X1.25X16MM) | |
| 8. | 6V-3265 | [1] | CLIP (9.52MM ID) | |
| 9. | 1S-2563 | [3] | PLUG | |
| 10. | 133-5654 | [1] | BRACKET | |
| M | METRIC PART | |||
Information:
BASIC ENGINE
PISTON & ROD GP
Special Instruction
Installation Instructions for Piston Packs{1225, 1239}
Installation Instructions for Piston Packs{1225, 1239}
Installation Instructions for Piston Packs{1225, 1239}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Disassembly and Assembly
Piston Cooling Jets - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
