AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

166-4946 PUMP GP-VACUUM S/N 7CN1-UP PART OF 163-2981 HYDRAULIC AR Type 1 580 WHEEL HARVESTER


HYDRAULIC SYSTEM
PUMP GP
TANK GP
LINES GP-HYDRAULIC
VALVE GP-CONTROL
VALVE GP-COMBINATION

WHEEL HARVESTER 580 WHEEL HARVESTER 7CN
 580 Wheel Harvester 7CN00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2898 580 7CN   (1998)

HYDRAULIC SYSTEM

PUMP GP
PUMP GP-METERING
162-5696 PUMP GP-METERING
PUMP GP-PISTON
155-9907 PUMP GP-PISTON
PUMP GP-VACUUM
166-4946 PUMP GP-VACUUM
PUMP GP-VACUUM
166-4946 PUMP GP-VACUUM
ROTATING GP-PUMP
178-4007 ROTATING GP-PUMP
VALVE GP-FLOW COMPENSATOR
178-4011 VALVE GP-FLOW COMPENSATOR
 

#SEBP28980310
 

166-4946: PUMP GP-VACUUM

166-4946 PUMP GP-VACUUM
S/N 7CN1-UP
PART OF 163-2981 HYDRAULIC AR
Type 1
i00992072 SEBP2898
1664946 PUMP GP-VACUUM Parts scheme
  For full view, you need register

Parts for your 580 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 185-6684 [1] BREATHER AS  
2. 161-5020 [1] PUMP & MOTOR-VACUUM  
3. 160-6134 I [1] HOSE AS  
4. 8C-6870 [1] ADAPTER  
5. 6V-8397 [1] SEAL-O-RING  
6. 6V-8934 [1] REDUCER AS  
7. 4J-5477 [2] SEAL-O-RING  
8. 8M-2773 [1] CLIP  
9. 9X-8256 [1] WASHER (6.6X12X2MM THK)  
10. 7X-2444 [1] TEE-SWIVEL  
11. 161-5541 [1] VALVE-VACUUM  
12. 3J-1907 [1] SEAL-O-RING  
13. 8C-6866 [1] CONNECTOR  
14. 8D-2676 [1] SWITCH GP-TOGGLE (SINGLE POLE)(VACUUM PUMP)  
  3L-8187 [2] LOCKWASHER (3.7X7.24X.48MM THK)  
  6T-3631 [2] NUT-HEX (15/32-32 THD)  
  6T-3632 [1] LOCKWASHER (11.96X15X.53MM THK)  
  6T-3633 [1] RING-LOCKING (12.3X18.26X.79MM THK)  
  6V-8374 [2] SCREW-MACHINE (6-32X0.25 IN)  
  I   SEE HOSE FABRICATION GUIDE
 

#SEBP28980311
 

166-4946: PUMP GP-VACUUM

166-4946 PUMP GP-VACUUM
S/N 7CN1-UP
PART OF 163-2981 HYDRAULIC AR
Type 2
i01899334 SEBP2898
1664946 PUMP GP-VACUUM Parts scheme
  For full view, you need register

Parts for your 580 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-3501 C [1] ADAPTER  
2. 7X-2444 [1] TEE-SWIVEL  
3. 160-6134 I [1] HOSE AS  
4. 161-5541 [1] VALVE-VACUUM  
5. 231-9331 C [1] PUMP  
6. 3J-1907 [1] SEAL-O-RING  
7. 4J-5477 [2] SEAL-O-RING  
8. 5C-2890 CM [2] NUT (M6X1 THD)  
9. 5C-9553 CM [2] BOLT (M6X1X16MM)  
10. 6V-8397 [1] SEAL-O-RING  
11. 6V-8934 [1] REDUCER AS  
12. 8C-6865 C [1] CONNECTOR  
13. 8C-6870 [1] ADAPTER  
14. 8D-2676 [1] SWITCH GP-TOGGLE (SINGLE POLE)(VACUUM PUMP)  
  3L-8187 [2] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32 THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [2] SCREW-MACHINE (6-32X0.25 IN)  
15. 8M-2773 [1] CLIP  
16. 8T-4171 CM [1] BOLT (M6X1X12MM)  
17. 9X-8256 C [5] WASHER (6.6X12X2MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#SEBP28980312
 

178-4007: ROTATING GP-PUMP

178-4007 ROTATING GP-PUMP
S/N 7CN1-UP
PART OF 155-9907 PUMP GP-PISTON
i01199911 SEBP2898
1784007 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 580 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-9913 [1] SEAL-SHAFT  
2. 137-1348 [1] COVER  
3. 145-3776 [1] CAGE  
4. 145-3773 [4] ROLLER  
5. 145-3771 [1] CRADLE  
6. 179-6907 [1] SHAFT  
7. 145-3774 [1] LINER-BEARING  
8. 145-3775 [2] RETAINER  
9. 179-6910 [9] PISTON AS  
10. 179-6911 [1] BARREL AS  
11. 179-6912 [1] PLATE  
12. 179-6913 [1] RETAINER  
13. 179-6914 B [2] SHIM  
14. 179-6915 B [2] SHIM  
15. 179-6916 [20] SPRING  
16. 095-0927 [1] RING-RETAINING  
17. 3E-4334 [1] RING-RETAINING  
18. 2J-8163 [1] SEAL-O-RING  
19. 5I-4275 [1] BEARING-ROLLER  
20. 6E-3840 [4] ROD  
21. 8T-8442 M [4] BOLT-SOCKET HEAD (M6X1X30MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP28980313
 

159-3669: TANK & MTG GP-HYDRAULIC

159-3669 TANK & MTG GP-HYDRAULIC
S/N 7CN1-UP
PART OF 163-2981 HYDRAULIC AR
i01011030 SEBP2898
1593669 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 580 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-6287 [1] COUPLING AS  
2. 6E-6550 [1] GAUGE AS-LIQUID LEVEL  
  8F-3469 [4] SEAL-O-RING  
  121-7958 [2] BOLT-MOUNTING  
3. 6V-0407 [1] SEAL-BONDED  
4. 6V-0467 [1] CONNECTOR  
5. 8C-6870 [2] ADAPTER  
6. 8T-3298 [1] SEAL-RECTANGULAR  
7. 8T-7913 [1] ADAPTER  
8. 156-1243 [1] FITTING  
9. 223-4218 [1] BREATHER  
10. 126-2075 Y [2] FILTER GP-OIL  
    (IMP CASE DRAIN/POWER TRAIN CASE DRAIN)
11. 129-0987 [1] DRAIN AS  
  6J-2419 [1] SEAL-O-RING  
  8F-0212 [1] SEAL-O-RING  
  129-0988 [1] PLUG  
12. 161-5033 [1] SENSOR-OIL LEVEL  
14. 159-5601 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1 THD)  
  7T-1099 [5] LINK  
15. 6V-9850 [1] ELBOW (SWIVEL)  
16. 161-5543 [1] FITTING  
17. 162-1811 [1] BRACKET  
20. 163-4018 [1] BRACKET  
21. 163-4032 [2] FILTER ELEMENT-HYDRAULIC (IMP RETURN/POWER TRAIN RETURN)  
22. 163-4033 Y [2] FILTER GP-OIL (HYD RETURN/IMP RETURN)  
24. 164-0104 [1] SENSOR-PRESSURE (FILTER RETURN)  
25. 164-0152 [1] VALVE  
27. 3J-1907 [1] SEAL-O-RING  
28. 3K-0360 [7] SEAL-O-RING  
29. 5C-9553 M [2] BOLT (M6X1X16MM)  
30. 6V-8397 [3] SEAL-O-RING  
31. 7M-8485 [5] SEAL-O-RING  
33. 8T-4137 M [2] BOLT (M10X1.5X20MM)  
34. 8T-4121 [17] WASHER-HARD (11X21X2.5MM THK)  
35. 8T-4133 M [3] NUT (M10X1.5 THD)  
36. 8T-4136 M [11] BOLT (M10X1.5X25MM)  
37. 8T-4186 M [1] BOLT (M10X1.5X40MM)  
38. 8T-4200 M [6] BOLT (M8X1.25X16MM)  
39. 8T-4224 [6] WASHER-HARD (8.8X16X2MM THK)  
40. 9S-4181 [5] PLUG  
41. 9S-4185 [5] PLUG  
42. 9X-8256 [2] WASHER (6.6X12X2MM THK)  
43. 6V-8934 [1] REDUCER AS  
44. 169-4663 Y [1] TANK GP-HYDRAULIC  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28980314
 

159-5586: TANK GP-HYDRAULIC

159-5586 TANK GP-HYDRAULIC
S/N 7CN1-UP
RETURN MANIFOLD
PART OF 169-4663 TANK GP-HYDRAULIC
i01012249 SEBP2898
1595586 TANK GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 580 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] TANK AS  
  2Y-9286 M [1] NUT  
  4J-5050 [5] BOSS  
  7J-5544 [5] FITTING (3/4X16 THD)  
  8T-4196 M [8] BOLT (M10X1.50X35MM)  
2. 159-5583 [2] COVER  
3. 7J-8956 [2] SEAL-O-RING (151.77MM ID)  
4. 8T-4121 [8] WASHER (2.5MM THK)  
5. 8T-4133 M [8] NUT (M10X1.50 THD)  
  M   METRIC PART
 

#SEBP28980315
 

169-4663: TANK GP-HYDRAULIC

169-4663 TANK GP-HYDRAULIC
S/N 7CN1-UP
PART OF 159-3669 TANK & MTG GP-HYDRAULIC
i01017422 SEBP2898
1694663 TANK GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 580 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 156-9091 [1] TANK AS  
2. 159-5586 Y [1] TANK GP-HYDRAULIC  
3. 163-4041 [2] SEAL  
4. 8T-4121 [8] WASHER (2.5MM THK)  
5. 8T-4136 M [8] BOLT (M10X1.50X25MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28980316
 

159-3696: VALVE & LINES GP-IMPLEMENT

159-3696 VALVE & LINES GP-IMPLEMENT
S/N 7CN1-UP
220KNM
PART OF 164-3531 BOOM & STICK AR
i01011248 SEBP2898
1593696 VALVE & LINES GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your 580 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 176-0295 Y [1] VALVE GP-BANK 6  
2. 8T-4138 M [6] BOLT (M6X1X20MM)  
3. 8T-4121 [6] WASHER-HARD (11X21X2.5MM THK)  
4. 170-2165 Y [1] FILTER GP-OIL (PILOT)  
5. 164-7492 [1] BRACKET  
6. 6V-9840 C [1] TEE-SWIVEL  
7. 8T-1674 [1] TEE  
8. 6V-9854 [1] ELBOW-SWIVEL  
9. 6V-8635 [1] CONNECTOR  
10. 6V-8944 [1] REDUCER-O-RING  
11. 6V-8557 [1] NUT-FACE SEAL  
12. 9S-4181 [1] PLUG  
13. 9S-4191 [1] PLUG  
14. 7X-2444 [2] TEE-SWIVEL  
15. 6V-3965 [2] FITTING AS  
16. 6V-0852 [2] CAP-DUST  
17. 155-0577 [1] VALVE GP-CHECK  
18. 6V-9836 [1] TEE-SWIVEL  
19. 6V-8721 C [1] ELBOW  
20. 6V-8935 C [2] REDUCER-O-RING  
21. 6V-8554 C [2] NUT (13/16-16 THD)  
22. 160-6075 I [1] HOSE AS  
23. 160-6076 I [1] HOSE AS  
24. 160-6070 I [1] HOSE AS  
25. 160-6083 I [1] HOSE AS  
26. 160-6124 I [1] HOSE AS  
27. 160-6117 I [1] HOSE AS  
28. 162-5549 [1] VALVE GP-SHUTTLE  
29. 3J-1907 C [14] SEAL-O-RING  
30. 7M-8485 [5] SEAL-O-RING  
31. 2M-9780 [2] SEAL-O-RING  
32. 5K-9090 C [8] SEAL-O-RING  
33. 6V-8398 C [2] SEAL-O-RING  
34. 6V-8636 [1] CONNECTOR  
35. 6V-8397 [4] SEAL-O-RING  
36. 4J-5477 [11] SEAL-O-RING  
37. 6V-9835 [1] TEE  
38. 6V-9008 [2] ELBOW  
39. 8T-4189 M [2] BOLT (M8X1.25X20MM)  
40. 8T-4224 [2] WASHER-HARD (8.8X16X2MM THK)  
41. 5P-9617 C [1] ADAPTER  
42. 8T-3311 C [1] TEE  
43. 6V-9847 [1] TEE-SWIVEL  
44. 8C-8451 M [2] BOLT (M6X1X40MM)  
45. 9X-8256 [2] WASHER (6.6X12X2MM THK)  
46. 160-6056 I [1] HOSE AS  
47. 180-5906 [1] BRACKET  
48. 6V-8641 [7] CONNECTOR  
49. 6V-9849 [2] ELBOW-SWIVEL  
50. 5P-1404 C [1] ADAPTER-O-RING (STRAIGHT THREAD)  
51. 3J-7354 C [1] SEAL-O-RING  
52. 8C-3451 C [1] CAP-DUST  
53. 8C-3446 C [1] VALVE GP-FLUID SAMPLING  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28980317
 

159-3697: VALVE & LINES GP-PENDULUM CONT

159-3697 VALVE & LINES GP-PENDULUM CONT
S/N 7CN1-UP
PART OF 163-2981 HYDRAULIC AR
i01034047 SEBP2898
1593697 VALVE & LINES GP-PENDULUM CONT Parts scheme
  For full view, you need register

Parts for your 580 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-9979 I [2] HOSE AS  
2. 160-6032 I [2] HOSE AS  
3. 160-6034 I [2] HOSE AS  
4. 160-6036 I [1] HOSE AS  
5. 160-6037 I [1] HOSE AS  
6. 160-6038 I [1] HOSE AS  
7. 160-6054 I [5] HOSE AS  
8. 202-3229 I [1] HOSE AS  
9. 160-6056 I [1] HOSE AS  
10. 160-6060 I [1] HOSE AS  
11. 160-6066 I [1] HOSE AS  
12. 172-9980 I [4] HOSE AS  
13. 202-3230 I [2] HOSE AS  
14. 160-6091 I [1] HOSE AS  
15. 160-6092 I [1] HOSE AS  
16. 160-6104 I [1] HOSE AS  
17. 161-2205 [2] MANIFOLD  
18. 162-5548 Y [1] VALVE GP-DIVERTER (PENDULUM ARM LOCK)  
19. 166-4083 [4] TUBE AS  
20. 2M-9780 [3] SEAL-O-RING  
21. 2P-8421 [2] ADAPTER-O-RING  
22. 3D-2824 [26] SEAL-O-RING  
23. 152-8340 Y [1] VALVE GP-SOLENOID (24 VOLT)(SIGNAL CUTOFF)  
24. 7T-9745 [1] MANIFOLD-VALVE  
25. 6V-0484 [1] ADAPTER-O-RING  
26. 6V-3965 [5] FITTING AS (QUICK DISCONNECT)  
27. 6V-0852 [5] CAP-DUST  
28. 6V-8556 [4] NUT (1 3/16-12 THD)  
29. 6V-8554 [2] NUT (13/16-16 THD)  
30. 6V-8627 [2] ELBOW  
31. 6V-8633 [2] CONNECTOR  
32. 6V-8637 [16] CONNECTOR-SEAL  
33. 6V-8638 [1] CONNECTOR-SEAL  
34. 6V-8639 [9] CONNECTOR  
35. 6V-8641 [2] CONNECTOR  
36. 6V-8647 [1] CONNECTOR  
37. 6V-8721 [2] ELBOW  
38. 6V-8733 [4] UNION-FACE SEAL  
39. 6V-8935 [2] REDUCER-O-RING  
40. 6V-8942 [4] REDUCER-O-RING (FACE)  
41. 161-5103 BD GUARD  
42. 6V-9839 [3] TEE-SWIVEL  
43. 6V-9842 [2] TEE-SWIVEL  
44. 6V-9844 [1] TEE-SWIVEL  
45. 6V-9851 [3] ELBOW  
46. 7X-0871 [3] TEE  
47. 6V-8791 [1] TEE-FACE SEAL  
48. 162-1812 [1] BRACKET AS  
  6V-9632 M [4] NUT-WELD (M6X1 THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5 THD)  
49. 8T-6876 [1] ELBOW  
50. 9S-4191 [1] PLUG (9/16-18 THD)  
51. 9S-4185 [6] PLUG  
52. 160-6065 I [1] HOSE AS  
53. 160-6067 I [1] HOSE AS  
54. 157-2403 Y [1] VALVE GP-CONTROL (PENDULUM ARM, 6 BANK)  
55. 159-5602 [1] BRACKET AS  
  7T-1099 [1] LINK  
  8T-3490 M [8] NUT-WELD (M10X1.5 THD)  
56. 8T-4137 M [8] BOLT (M10X1.5X20MM)  
57. 8T-6466 M [2] BOLT (M10X1.50X60MM)  
58. 8T-2397 M [4] BOLT (M6X1X90MM)  
59. 8T-4136 M [4] BOLT (M10X1.5X25MM)  
60. 8T-4186 M [3] BOLT (M10X1.5X40MM)  
61. 8T-4172 M [6] BOLT (M10X1.50X80MM)  
62. 8T-4121 [24] WASHER-HARD (11X21X2.5MM THK)  
63. 3J-7354 [1] SEAL-O-RING  
64. 3K-0360 [15] SEAL-O-RING  
65. 3J-1907 [6] SEAL-O-RING  
66. 6V-9746 [30] SEAL-O-RING  
67. 4J-5477 [15] SEAL-O-RING  
68. 6V-8398 [29] SEAL-O-RING  
69. 161-5112 [4] CLAMP  
70. 170-7536 [4] CLAMP  
71. 9S-8008 [2] PLUG  
72. 8T-6451 [4] ELBOW  
73. 172-1716 [2] SUPPORT  
74. 7M-8485 [1] SEAL-O-RING  
75. 6V-9835 [1] TEE  
76. 5P-5777 [1] ADAPTER-O-RING  
77. 2G-8111 [1] ACCUMULATOR (PILOT)(DEAD ENGINE LOWER)  
  8C-3178 [1] CONNECTOR  
78. 160-6131 I [1] HOSE AS  
80. 3P-9847 [1] CLIP  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP28980318
 

176-0295: VALVE GP-BANK 6

176-0295 VALVE GP-BANK 6
S/N 7CN1-UP
220 KNM. IMPLEMENT
PART OF 159-3696 VALVE & LINES GP-IMPLEMENT
i01186214 SEBP2898
1760295 VALVE GP-BANK 6 Parts scheme
  For full view, you need register

Parts for your 580 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 176-0296 Y [1] VALVE GP-CONTROL (INLET)  
2. 169-0848 Y [1] VALVE GP-CONTROL (STEERING CYLINDER)  
3. 178-9088 Y [1] VALVE GP-CONTROL (SWING MOTOR)  
4. 169-0842 Y [1] VALVE GP-CONTROL (BOOM CYLINDER)  
5. 169-0843 Y [1] VALVE GP-CONTROL (STICK CYLINDER)  
6. 169-0854 Y [1] VALVE GP-CONTROL (HEAD ROTATOR)  
7. 169-0845 Y [1] VALVE GP-CONTROL (STICK EXTENSION CYLINDER)  
8. 169-0846 Y [1] COVER GP-VALVE END (END)  
9. 171-1583 [1] KIT-BRACKET  
10. 171-1584 [1] KIT-TIE ROD  
11. 171-1585 [7] KIT-SEAL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP28980319
 

162-5701: VALVE GP-COMBINATION

162-5701 VALVE GP-COMBINATION
S/N 7CN1-UP
SWING MOTOR BRAKE CONTROL
PART OF 159-3711 LINES GP-SWING MOTOR
i01110077 SEBP2898
1625701 VALVE GP-COMBINATION Parts scheme
  For full view, you need register

Parts for your 580 WHEEL HARVESTER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-7271 [1] VALVE GP-SOLENOID (SWING BRAKE)  
  224-3961 [1] NUT  
  173-0077 [2] COIL  
  198-8917 [1] KIT-SEAL  
    (INCLUDES SEALS)
2. 165-7272 [1] VALVE-PRESSURE REDUCING (SWING BRAKE)  
3. 9X-2536 M [4] BOLT-SOCKET HEAD (M5X.08X70MM)  
4. 161-6154 [8] SEAL-O-RING  
  M   METRIC PART
 

Information:

Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Magazine
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog 580 :

PUMP GP-PISTON
155-9907 PUMP GP-PISTON
PUMP GP-METERING
162-5696 PUMP GP-METERING
PUMP GP-HYDRAULIC TANK FILL
166-2541 PUMP GP-HYDRAULIC TANK FILL
PUMP & MTG GP-HYDRAULIC
159-2131 PUMP & MTG GP-HYDRAULIC
MOUNTING GP-CYLINDER
163-3004 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
163-3003 MOUNTING GP-CYLINDER
MOTOR GP-PISTON
155-9911 MOTOR GP-PISTON
MOTOR GP-PISTON
155-9910 MOTOR GP-PISTON
PUMP GP-VACUUM
166-4946 PUMP GP-VACUUM
ROTATING GP-PUMP
178-4007 ROTATING GP-PUMP
TANK & MTG GP-HYDRAULIC
159-3669 TANK & MTG GP-HYDRAULIC
TANK GP-HYDRAULIC
159-5586 TANK GP-HYDRAULIC
TANK GP-HYDRAULIC
169-4663 TANK GP-HYDRAULIC
VALVE & LINES GP-IMPLEMENT
159-3696 VALVE & LINES GP-IMPLEMENT
VALVE & LINES GP-PENDULUM CONT
159-3697 VALVE & LINES GP-PENDULUM CONT
VALVE GP-BANK 6
176-0295 VALVE GP-BANK 6

Truck sale:

Caterpillar 580, Harvesters, Forestry equipment
115,000 
Caterpillar 580, Harvesters, Forestry equipment
- Harvesters
MILTON CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.