BASIC ENGINE
PISTON & ROD GPCYLINDER BLOCK GP
PULLEY GP
VALVE MECHANISM GP
CRANKSHAFT GP
LUBRICATION SYSTEM
BREATHER GPCOOLING SYSTEM
COOLER GPLUBRICATION SYSTEM
FUMES DISPOSAL GPBASIC ENGINE
PISTON & ROD GP#SEBP29000040
147-9592: PISTON & ROD GP
147-9592 PISTON & ROD GP
S/N 6JK1922-UP
17:1 RATIO
PART OF 149-1154 ENGINE AR-CORE
Type 1
S/N 6JK1922-UP
17:1 RATIO
PART OF 149-1154 ENGINE AR-CORE
Type 1
Parts for your 574 FORWARDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 133-4983 | [1] | CROWN AS-PISTON | |
| 2. | 132-5246 | [1] | RING-PISTON (TOP) | |
| 3. | 197-9277 | [1] | RING-PISTON (INTERMEDIATE) | |
| 4. | 107-7566 | [1] | RING-PISTON (OIL CONTROL) | |
| 5. | 7C-0111 | [2] | RETAINER-PIN | |
| 6. | 168-7226 | [1] | PIN-PISTON | |
| 7. | 2W-9128 | [1] | ROD AS-CONNECTING | |
| 8. | 2W-0027 | [1] | BEARING (EYE END) | |
| 9. | 9N-3832 | [2] | BOLT-CONNECTING ROD | |
| 10. | 9L-7669 | [2] | NUT-CONNECTING ROD (7/16-20-THD) | |
| 11. | 7W-9415 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 7C-6976 A | [1] | BEARING-CONNECTING ROD (0.25-MM US) | ||
| 7C-6977 A | [1] | BEARING-CONNECTING ROD (0.5-MM US) | ||
| 12. | 187-1513 | [1] | SKIRT-PISTON | |
| 13. | 135-5970 | [1] | TUBE AS | |
| 14. | 6V-3940 M | [1] | BOLT (M8X1.25X25-MM) | |
| A | NOT PART OF THIS GROUP | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP29000041
147-9592: PISTON & ROD GP
147-9592 PISTON & ROD GP
S/N 6JK1922-UP
17:1 RATIO
PART OF 149-1154 ENGINE AR-CORE
Type 2
S/N 6JK1922-UP
17:1 RATIO
PART OF 149-1154 ENGINE AR-CORE
Type 2
Parts for your 574 FORWARDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 393-8986 | [1] | CROWN AS-PISTON | |
| 2. | 197-9386 | [1] | RING-PISTON (TOP) | |
| 3. | 197-9277 | [1] | RING-PISTON (INTERMEDIATE) | |
| 4. | 197-9354 | [1] | RING-PISTON (OIL CONTROL) | |
| 5. | 7C-0111 | [2] | RETAINER-PIN | |
| 6. | 525-0480 | [1] | PIN-PISTON | |
| 7. | 213-3193 | [1] | ROD AS-CONNECTING (NON-DRILLED) | |
| 7A. | 2W-0027 | [1] | BEARING (EYE END) | |
| 7B. | 229-6266 | [2] | BOLT | |
| 8. | 224-6638 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 7C-6976 AB | BEARING-CONNECTING ROD (0.25-MM US) | |||
| 7C-6977 AB | BEARING-CONNECTING ROD (0.5-MM US) | |||
| 9. | 238-2726 | [1] | SKIRT-PISTON | |
| 10. | 135-5970 | [1] | TUBE AS (OIL JET) | |
| 11. | 6V-3940 M | [1] | BOLT (M8X1.25X25-MM) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP29000042
156-0228: PLUG GP-CYLINDER BLOCK
156-0228 PLUG GP-CYLINDER BLOCK
S/N 6JK1922-UP
PART OF 149-1153, 172-5639 ENGINE AR
S/N 6JK1922-UP
PART OF 149-1153, 172-5639 ENGINE AR
Parts for your 574 FORWARDER:
CATERPILLAR SIS#SEBP29000043
4W-5429: PULLEY GP-CRANKSHAFT
4W-5429 PULLEY GP-CRANKSHAFT
S/N 6JK1922-UP
PART OF 149-1153, 172-5639 ENGINE AR
S/N 6JK1922-UP
PART OF 149-1153, 172-5639 ENGINE AR
Parts for your 574 FORWARDER:
CATERPILLAR SIS#SEBP29000044
153-3979: PULLEY GP-FAN
Parts for your 574 FORWARDER:
CATERPILLAR SIS#SEBP29000045
107-7722: ROCKER ARM GP
Parts for your 574 FORWARDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 260-7524 M | [2] | SCREW-VALVE ADJUSTMENT (M10X1.5-THD) | |
| 2. | 2Y-5829 M | [2] | NUT (M10X1.5-THD) | |
| 3. | 4P-7790 | [1] | SHAFT AS-ARM | |
| 3A. | 2D-6642 | [1] | BALL | |
| 3B. | 7M-5130 | [1] | PIN-SPRING | |
| 3C. | 7W-4137 | [1] | SHAFT AS | |
| 3D. | 0L-1026 | [1] | PLUG-CUP | |
| 4. | 9Y-8534 | [1] | SUPPORT-SHAFT | |
| 5. | 105-1776 | [1] | ROCKER ARM AS (UNIT INJECTOR) | |
| 6. | 7W-4117 M | [1] | NUT (M12X1.25-THD) | |
| 7. | 9Y-4973 | [1] | SCREW-INJECTION ADJUSTMENT | |
| 8. | 7W-3983 | [1] | RING-RETAINING | |
| 9. | 9Y-1582 | [1] | BUTTON-ARM | |
| 10. | 6I-0924 | [2] | ROCKER ARM AS | |
| (EACH INCLUDES) | ||||
| 10A. | 100-6291 | [1] | SEAT-WEAR | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP29000046
115-4203: SEAL GP-CRANKSHAFT
Parts for your 574 FORWARDER:
CATERPILLAR SIS#SEBP29000047
139-3527: BREATHER GP
Parts for your 574 FORWARDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2W-9162 | [1] | BREATHER AS (CRANKCASE) | |
| 2. | 8H-2046 | [1] | SEAL-O-RING | |
| 3. | 6V-3821 M | [1] | BOLT (M8X1.25X110-MM) | |
| 4. | 5N-4185 | [1] | WASHER-SPECIAL | |
| 5. | 6V-5218 M | [2] | BOLT (M8X1.25X35-MM) | |
| 6. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 4P-9936 | [1] | BASE | |
| 8. | 7C-1159 | [1] | GASKET | |
| M | METRIC PART | |||
#SEBP29000048
4P-8183: FILTER GP-ENGINE OIL
4P-8183 FILTER GP-ENGINE OIL
S/N 6JK1922-UP
PART OF 149-1153, 172-5639 ENGINE AR
S/N 6JK1922-UP
PART OF 149-1153, 172-5639 ENGINE AR
Parts for your 574 FORWARDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1R-1807 | [1] | FILTER AS-ENGINE OIL (ADVANCED EFFICIENCY) | |
| 2. | 8T-0276 M | [4] | BOLT (M8X1.25X45-MM)(MARKED X) | |
| 3. | 9M-1974 | [14] | WASHER-HARD (8.8X16X2-MM THK) | |
| 4. | 6V-2317 M | [10] | BOLT (M8X1.25X30-MM) | |
| 5. | 7C-1493 | [2] | VALVE AS-BYPASS (ENGINE OIL FILTER) | |
| 6. | 242-3864 | [2] | SPRING | |
| 7. | 377-9593 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9N-6152 | [1] | PLUG | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 8. | 9M-1974 B | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 392-5358 | [1] | BASE AS-OIL FILTER | |
| 2P-2537 | [1] | STUD-HOLLOW | ||
| 10. | 300-7933 | [1] | GASKET | |
| 11. | 8T-0276 BM | [1] | BOLT (M8X1.25X45-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP29000049
190-0108: FUMES DISPOSAL GP
Information:
BASIC ENGINE
PISTON & ROD GP
Special Instruction
Installation Instructions for Piston Packs{1225, 1239}
Installation Instructions for Piston Packs{1225, 1239}
Installation Instructions for Piston Packs{1225, 1239}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Top Piston Ring Changed On Gosselies Built Vehicle Applicaiton Engines
Top Piston Ring Changed On Gosselies Built Vehicle Applicaiton Engines
Top Piston Ring Changed On Gosselies Built Vehicle Applicaiton Engines
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
Testing and Adjusting
Disassembly and Assembly
Piston Cooling Jets - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Caterpillar Parts SIS Catalog 574 :
Truck sale:
CATERPILLAR 574 2013
- FORESTRY - FORWARDER
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
- FORESTRY - FORWARDER
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;



