BASIC ENGINE
MOUNTING GP-STARTING MOTORPAN GP-OIL
PISTON & ROD GP
BELT TIGHTENER GP
VALVE MECHANISM GP
LUBRICATION SYSTEM
BREATHER GPFILTER GP-ENGINE OIL
BASIC ENGINE
MOUNTING GP-STARTING MOTOR
#SEBP29010030
125-2963: MOUNTING GP-STARTING MOTOR
125-2963 MOUNTING GP-STARTING MOTOR
S/N 7JK1-UP
PART OF 162-6351, 205-6731 ENGINE AR
S/N 7JK1-UP
PART OF 162-6351, 205-6731 ENGINE AR
For full view, you need register
#SEBP29010031
178-6575: PAN GP-OIL
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | ||
| 8T-7547 M | [38] | BOLT (M8X1.25X30-MM) | ||
| 5I-8015 | [1] | VALVE AS-FLUID SAMPLING | ||
| 5I-8067 | [1] | WASHER-SEALING | ||
| 176-4979 | [1] | VALVE | ||
| 5I-7666 | [1] | GASKET | ||
| 135-2402 | [1] | GAUGE (DIPSTICK) | ||
| 178-6542 | [1] | GUIDE (DIPSTICK) | ||
| 183-8262 | [1] | PAN (OIL) | ||
| 5I-4993 | [1] | SEAL | ||
| 125-2968 | [1] | SEAL | ||
| 170-9376 | [1] | SWITCH AS-LIQUID LEVEL (OIL LEVEL) | ||
| 3E-3364 | [1] | RECEPTACLE (2-PIN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 144-1636 | [2] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 9X-3401 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1767 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 095-8638 | [39] | WASHER-SPRING | ||
| M | METRIC PART | |||
#SEBP29010032
212-8649: PAN GP-OIL
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 183-8262 | [1] | PAN (OIL) | |
| 2. | 5I-8015 | [1] | VALVE AS-FLUID SAMPLING (OIL SAMPLING) | |
| 2A. | 5I-8067 | [1] | WASHER-SEALING | |
| 2B. | 176-4979 | [1] | VALVE (OIL SAMPLING) | |
| 3. | 5I-5607 | [1] | PLUG-DRAIN (ENGINE OIL PAN)(DRAIN-OIL PAN) | |
| 4. | 213-0677 | [1] | SWITCH AS-LIQUID LEVEL | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5. | 135-2402 | [1] | GAUGE (DIPSTICK) | |
| 6. | 178-6542 | [1] | GUIDE (DIPSTICK) | |
| 7. | 5I-4993 | [1] | SEAL | |
| 8. | 8T-7547 M | [38] | BOLT (M8X1.25X30-MM) | |
| 9. | 5I-7666 | [1] | GASKET | |
| 10. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 11. | 3B-4505 | [39] | LOCKWASHER | |
| 12. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 125-2968 | [1] | SEAL | |
| 14. | 095-2040 | [1] | WASHER | |
| M | METRIC PART | |||
#SEBP29010033
178-6517: PISTON & ROD GP
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-6543 J | [6] | SET-PISTON RING (STANDARD) | |
| 178-6544 AJ | [6] | SET-PISTON RING (0.25-MM OS) | ||
| 178-6545 AJ | [6] | SET-PISTON RING (0.5-MM OS) | ||
| 2. | 297-7753 | [6] | PISTON (STANDARD) | |
| 297-7760 A | [6] | PISTON (0.25-MM OS) | ||
| 297-7761 A | [6] | PISTON (0.5-MM OS) | ||
| 3. | 094-7134 | [6] | PIN | |
| 4. | 5I-7667 | [12] | RING | |
| 5. | 5I-7668 | [6] | ROD AS | |
| (EACH INCLUDES) | ||||
| 6. | 5I-7539 | [1] | BUSHING | |
| 7. | 094-7154 | [2] | BOLT (M12X1.25X85-MM) | |
| 8. | 094-7516 | [2] | NUT (M12X1.25-THD) | |
| 9. | 5I-7637 | [12] | BEARING | |
| 5I-7794 A | [12] | BEARING (0.25-MM US) | ||
| 5I-7795 A | [12] | BEARING (0.5-MM US) | ||
| 5I-7796 A | [12] | BEARING (0.75-MM US) | ||
| A | NOT PART OF THIS GROUP | |||
| J | INCLUDES A COMPLETE SET OF RINGS FOR ONE PISTON | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP29010034
212-8548: PISTON & ROD GP
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-6543 BJ | [6] | SET-PISTON RING (STANDARD) | |
| 178-6544 BJ | [6] | SET-PISTON RING (0.25-MM OS) | ||
| 178-6545 BJ | [6] | SET-PISTON RING (0.5-MM OS) | ||
| 2. | 297-7750 B | [6] | PISTON (STANDARD) | |
| 297-7754 B | [6] | PISTON (0.25MM OS) | ||
| 297-7755 B | [6] | PISTON (0.50MM OS) | ||
| 3. | 094-7134 | [6] | PIN | |
| 4. | 5I-7667 | [12] | RING | |
| 5. | 5I-7668 | [6] | ROD AS | |
| (EACH INCLUDES) | ||||
| 6. | 5I-7539 | [1] | BUSHING | |
| 7. | 094-7154 | [2] | BOLT (M12X1.25X85-MM) | |
| 8. | 094-7516 | [2] | NUT (M12X1.25-THD) | |
| 9. | 5I-7637 | [12] | BEARING | |
| 5I-7794 B | [12] | BEARING (0.25-MM US) | ||
| 5I-7795 B | [12] | BEARING (0.5-MM US) | ||
| 5I-7796 B | [12] | BEARING (0.75-MM US) | ||
| B | USE AS REQUIRED | |||
| J | INCLUDES A COMPLETE SET OF RINGS FOR ONE PISTON | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP29010035
154-0491: PULLEY GP-IDLER
154-0491 PULLEY GP-IDLER
S/N BEA1-UP; BDE1-UP; BBL1-UP; BCN1-UP
PART OF 162-6189 COMPRESSOR GP-REFRIGERANT
ALSO AN ATTACHMENT
S/N BEA1-UP; BDE1-UP; BBL1-UP; BCN1-UP
PART OF 162-6189 COMPRESSOR GP-REFRIGERANT
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 184-3825 | [1] | NUT | |
| 2. | 239-6626 | [1] | PULLEY-IDLER | |
| 3. | 239-6627 M | [1] | BOLT (M8X1.25X110-MM) | |
| 4. | 3B-4505 | [1] | LOCKWASHER | |
| 5. | 239-6628 | [1] | SHAFT | |
| 6. | 239-6629 | [1] | WASHER | |
| 7. | 239-6630 | [1] | COLLAR | |
| 8. | 239-6631 | [1] | BEARING AS-BALL | |
| 9. | 239-6632 | [1] | RING-SNAP | |
| 10. | 239-6633 | [1] | WASHER | |
| M | METRIC PART | |||
#SEBP29010036
178-6509: VALVE MECHANISM GP
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5I-4921 | [2] | BOLT (M12X1.25X21-MM) | |
| 2. | 5I-7720 | [2] | PIPE | |
| 3. | 5I-7622 | [4] | RING | |
| 4. | 2W-6047 | [4] | WASHER (22.05X31.75X0.89-MM THK) | |
| 5. | 5I-7590 B | [6] | ROCKER AS | |
| 178-6532 B | [6] | ROCKER AS | ||
| (EACH ROCKER AS INCLUDES) | ||||
| 6. | 5I-7631 | [1] | BUSHING | |
| 7. | 094-9525 | [1] | SCREW | |
| 8. | 091-3474 M | [1] | NUT (M8X1.25-THD) | |
| 9. | 5I-7722 | [6] | BRACKET | |
| 10. | 3B-4505 | [12] | LOCKWASHER | |
| 11. | 5I-7730 | [6] | BOLT (M8X1.25X103-MM) | |
| 12. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 13. | 5I-7721 | [4] | SPRING | |
| 14. | 5I-7731 | [2] | SHAFT AS-ROCKER ARM | |
| (EACH INCLUDES) | ||||
| 15. | 094-4696 | [1] | PLUG | |
| 16. | 5I-7630 | [12] | CAP | |
| 17. | 5I-7719 | [24] | RETAINER | |
| 18. | 5I-7625 | [12] | RETAINER | |
| 19. | 5I-7624 | [12] | SEAL | |
| 20. | 5I-7740 | [12] | SPRING | |
| 21. | 5I-7739 | [6] | VALVE (EXHAUST) | |
| 22. | 5I-7738 | [6] | VALVE (INLET) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP29010037
212-8544: VALVE MECHANISM GP
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5I-4921 | [2] | BOLT (M12X1.25X21-MM) | |
| 2. | 5I-7720 | [2] | PIPE | |
| 3. | 5I-7622 | [4] | RING | |
| 4. | 2W-6047 | [4] | WASHER (22.05X31.75X0.89-MM THK) | |
| 5. | 5I-7590 B | [6] | ROCKER AS | |
| 5I-7590 B | [6] | ROCKER AS | ||
| (EACH ROCKER AS INCLUDES) | ||||
| 6. | 5I-7631 | [1] | BUSHING | |
| 7. | 091-3474 M | [1] | NUT (M8X1.25-THD) | |
| 8. | 094-9525 | [1] | SCREW | |
| 9. | 5I-7722 | [6] | BRACKET | |
| 10. | 3B-4505 | [12] | LOCKWASHER | |
| 11. | 5I-7730 | [6] | BOLT (M8X1.25X103-MM) | |
| 12. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 13. | 5I-7721 | [4] | SPRING | |
| 14. | 5I-7731 | [2] | SHAFT AS-ROCKER ARM | |
| (EACH INCLUDES) | ||||
| 15. | 094-4696 | [1] | PLUG | |
| 16. | 5I-7630 | [12] | CAP | |
| 17. | 5I-7719 | [24] | RETAINER | |
| 18. | 5I-7625 | [12] | RETAINER | |
| 19. | 5I-7624 | [12] | SEAL | |
| 20. | 5I-7740 | [12] | SPRING | |
| 21. | 5I-7739 | [6] | VALVE (EXHAUST) | |
| 22. | 212-8477 | [6] | VALVE (INLET) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP29010038
178-6540: BREATHER GP
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5I-7725 | [1] | BREATHER (CRANKCASE) | |
| 2. | 094-9672 | [1] | SEAL-O-RING | |
| 3. | 2S-3440 | [3] | CLAMP-HOSE | |
| 4. | 183-8263 | [1] | TUBE (LOWER FUMES DISPOSAL) | |
| 5. | 178-6534 | [1] | SUPPORT | |
| 6. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 7. | 7X-0796 | [2] | LOCKWASHER | |
| 8. | 5I-7645 | [1] | PIPE (CRANKASE BREATHER ELBOW) | |
| 9. | 5I-4940 | [1] | TUBE (FUMES DISPOSAL)(UPPER) | |
| 10. | 5I-7726 | [1] | STAY | |
| M | METRIC PART | |||
#SEBP29010039
196-8225: FILTER GP-ENGINE OIL
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 183-8179 | [1] | BASE AS | ||
| 096-3321 | [2] | PLUG | ||
| 8T-4136 M | [10] | BOLT (M10X1.5X25-MM) | ||
| 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | ||
| 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | ||
| 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | ||
| 8T-7329 M | [1] | BOLT (M8X1.25X55-MM) | ||
| 178-6576 M | [1] | BOLT (M8X1.25X75-MM) | ||
| 178-6577 M | [2] | BOLT (M8X1.25X100-MM) | ||
| 196-8192 | [1] | BOLT (M16X1.5X53-MM) | ||
| 196-8191 | [1] | BRACKET AS | ||
| 8C-3445 | [1] | CAP-DUST | ||
| 196-8227 | [1] | CLAMP | ||
| 168-0582 | [1] | COVER | ||
| 1R-0739 | [1] | FILTER AS-ENGINE OIL (STANDARD EFFICIENCY) | ||
| 5B-5947 | [2] | GASKET | ||
| 125-2972 | [1] | GASKET | ||
| 125-2979 | [1] | GASKET | ||
| 178-6571 | [1] | GASKET | ||
| 196-8228 | [1] | HOSE | ||
| 7X-0796 | [12] | LOCKWASHER | ||
| 178-6566 M | [1] | NUT (M16X1.5-THD) | ||
| 5I-7505 | [1] | PLUG | ||
| 178-6569 | [1] | PLUG | ||
| 4I-9404 | [2] | SEAL-O-RING | ||
| 178-6567 | [1] | SEAL-O-RING | ||
| 5I-8026 | [1] | VALVE AS | ||
| 5I-8066 | [1] | VALVE AS-RELIEF | ||
| 8C-3446 | [1] | VALVE-SAMPLING | ||
| 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 095-8638 | [6] | WASHER-SPRING | ||
| M | METRIC PART | |||
Information:
Caterpillar Parts SIS Catalog 320C :
Truck sale:
288,000
287,325
287,325