AIR INLET AND EXHAUST SYSTEM
MUFFLER GPTURBOCHARGER GP
FUEL SYSTEM
CONTROL GP-GOVERNORFILTER GP-FUEL
AIR INLET AND EXHAUST SYSTEM
MUFFLER GP
#SEBP29010070
253-4468: MUFFLER & CONVERTER
253-4468 MUFFLER & CONVERTER
S/N BEA1-UP; BDE1-UP; BCN1-UP
660 X 646 X 384-MM, 26 X 25 X 15-IN. PROVIDE AN OPTIONAL AFTERTREATMENT CATALYST MUFFLER FOR THE 320C EXCAVATOR
FIELD INSTALLATION
S/N BEA1-UP; BDE1-UP; BCN1-UP
660 X 646 X 384-MM, 26 X 25 X 15-IN. PROVIDE AN OPTIONAL AFTERTREATMENT CATALYST MUFFLER FOR THE 320C EXCAVATOR
FIELD INSTALLATION
For full view, you need register
Parts for your 320C EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP29010071
178-6523: MUFFLER GP
For full view, you need register
Parts for your 320C EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 266-6252 | [1] | MUFFLER | |
| 2. | 178-6559 B | [1] | BRACKET | |
| 3. | 178-6562 B | [1] | BRACKET | |
| 4. | 178-6560 | [2] | U-BOLT (M10X1.25-THD) | |
| 5. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 6. | 6V-8231 M | [8] | NUT (M10X1.25-THD) | |
| 7. | 5I-8040 | [1] | PIPE | |
| 8. | 5I-7679 | [1] | GASKET | |
| 9. | 178-6554 M | [3] | STUD (M10X1.5X15-MM, M10X1.25X20-MM) | |
| 10. | 5I-7633 | [6] | NUT (M10X1.25-THD) | |
| 11. | 094-7583 | [1] | CLAMP AS | |
| 12. | 7X-0796 | [4] | LOCKWASHER | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP29010072
5I-8018: TURBOCHARGER GP
For full view, you need register
#SEBP29010073
319-4234: CABLE GP-GOVERNOR CONTROL
319-4234 CABLE GP-GOVERNOR CONTROL
S/N BEA1-UP; BDE1-UP; BBL1-UP; BCN1-UP
FOR FIELD REPAIR OF GOVERNOR MOTOR CABLES
PART OF 157-3169 CONTROL GP-GOVERNOR
ALSO FIELD INSTALLATION
S/N BEA1-UP; BDE1-UP; BBL1-UP; BCN1-UP
FOR FIELD REPAIR OF GOVERNOR MOTOR CABLES
PART OF 157-3169 CONTROL GP-GOVERNOR
ALSO FIELD INSTALLATION
For full view, you need register
Parts for your 320C EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 248-4754 | [1] | HARNESS AS-ENGINE (GOVERNOR BREAKOUT) | ||
| 188-8589 | [1] | HARNESS AS-WIRING (GOVERNOR ACTUATOR, TEST) | ||
| 3S-2093 | [8] | STRAP-CABLE | ||
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9Y-7207 | [1] | STRIP-TERMINAL | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 2L-8074 | [8] | TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 4Y-4079 | [3] | WIRE AS | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 309-5861 | [1] | KIT-MOTOR REPAIR | ||
| (INCLUDES CABLE,2 SEALS & PACKING) | ||||
#SEBP29010074
157-3169: CONTROL GP-GOVERNOR
157-3169 CONTROL GP-GOVERNOR
S/N BEA1-UP; BDE1-UP; BBL1-UP; BCN1-UP
PART OF 137-0961, 137-0962, 137-0963, 190-5317 CHASSIS AR
S/N BEA1-UP; BDE1-UP; BBL1-UP; BCN1-UP
PART OF 137-0961, 137-0962, 137-0963, 190-5317 CHASSIS AR
For full view, you need register
Parts for your 320C EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 247-5213 | [1] | ACTUATOR AS-GOVERNOR | |
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9X-3401 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 157-3160 | [2] | JOINT | ||
| 2. | 171-2635 | [1] | BRACKET AS | |
| 3. | 4K-6177 | [1] | CLIP | |
| 4. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 5. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 6. | 119-0627 | [1] | BRACKET AS | |
| 7. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 8. | 7X-2537 M | [2] | BOLT (M8X1.25X35-MM) | |
| 9. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 11. | 8C-8451 M | [2] | BOLT (M6X1X40-MM) | |
| 12. | 119-0629 | [1] | LEVER AS | |
| 13. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 319-4234 AFY | [1] | CABLE GP-GOVERNOR CONTROL | ||
| (REFER TO REHS2358 FIELD REPAIR OF GOVERNOR MOTOR CABLES) | ||||
| A | NOT PART OF THIS GROUP | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29010075
178-6530: FILTER GP-FUEL
For full view, you need register
Parts for your 320C EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-6586 | [1] | FILTER AS-FUEL | |
| 1R-0751 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY) | ||
| 2. | 094-9725 | [1] | PLUG | |
| 3. | 095-2038 | [1] | WASHER (7.8X13.5X2-MM THK) | |
| 4. | 094-9726 | [2] | BOLT (M14X1.5X26-MM) | |
| 5. | 095-2040 | [4] | WASHER | |
| 6. | 178-6588 | [1] | BRACKET | |
| 7. | 178-6589 | [1] | HOSE | |
| 8. | 5I-7829 | [1] | PIPE | |
| 9. | 178-6591 | [1] | HOSE | |
| 10. | 099-5041 | [2] | BOLT (M14X1.5X27-MM) | |
| 11. | 095-2040 | [4] | WASHER | |
| 12. | 105-2508 | [1] | PUMP AS-FUEL PRIMING | |
| 12A. | 229-3218 | [2] | VALVE AS | |
| 12B. | 7L-9061 | [1] | SEAL-O-RING | |
| 13. | 1P-0436 | [1] | GASKET (FUEL PRIMING PUMP) | |
| 14. | 178-6594 | [1] | BASE | |
| 15. | 178-6595 M | [1] | BOLT (M6X1X30-MM) | |
| 16. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| 17. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 18. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 19. | 096-2500 | [1] | LOCKWASHER | |
| 20. | 3B-4505 | [1] | LOCKWASHER | |
| 21. | 7X-0796 | [8] | LOCKWASHER | |
| 22. | 5I-7647 | [1] | BRACKET | |
| 23. | 178-6596 | [1] | BRACKET | |
| 24. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| M | METRIC PART | |||
#SEBP29010076
178-6530: FILTER GP-FUEL
For full view, you need register
Parts for your 320C EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-6586 | [1] | FILTER AS-FUEL | |
| 1R-0751 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY) | ||
| 2. | 094-9725 | [1] | PLUG | |
| 3. | 095-2038 | [1] | WASHER (7.8X13.5X2-MM THK) | |
| 4. | 094-9726 | [2] | BOLT (M14X1.5X26-MM) | |
| 5. | 095-2040 | [4] | WASHER | |
| 6. | 178-6588 | [1] | BRACKET | |
| 7. | 178-6589 | [1] | HOSE | |
| 8. | 117-6430 | [1] | HOSE | |
| 9. | 178-6591 | [1] | HOSE | |
| 10. | 099-5041 | [2] | BOLT (M14X1.5X27-MM) | |
| 11. | 095-2040 | [4] | WASHER | |
| 12. | 137-5541 | [1] | PUMP GP-FUEL PRIMING | |
| 12A. | 7E-2985 | [2] | VALVE AS | |
| 12B. | 1H-8171 | [1] | SEAL-O-RING | |
| 12C. | 6V-1903 | [1] | SEAL-O-RING | |
| 13. | 1P-0436 | [1] | GASKET (FUEL PRIMING PUMP) | |
| 14. | 178-6594 | [1] | BASE | |
| 15. | 178-6595 M | [1] | BOLT (M6X1X30-MM) | |
| 16. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| 17. | 183-8224 | [1] | TUBE | |
| 18. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 19. | 096-2500 | [1] | LOCKWASHER | |
| 20. | 3B-4505 | [1] | LOCKWASHER | |
| 21. | 7X-0796 | [8] | LOCKWASHER | |
| 22. | 5I-7647 | [1] | BRACKET | |
| 23. | 183-8225 | [1] | BRACKET | |
| 24. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 25. | 183-8223 | [1] | TUBE | |
| M | METRIC PART | |||
#SEBP29010077
178-6530: FILTER GP-FUEL
For full view, you need register
Parts for your 320C EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-6586 | [1] | FILTER AS-FUEL | |
| 1R-0751 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY) | ||
| 2. | 094-9725 | [1] | PLUG | |
| 3. | 095-2038 | [1] | WASHER (7.8X13.5X2-MM THK) | |
| 4. | 094-9726 | [2] | BOLT (M14X1.5X26-MM) | |
| 5. | 095-2040 | [4] | WASHER | |
| 6. | 178-6588 | [1] | BRACKET | |
| 7. | 190-5829 | [1] | HOSE | |
| 8. | 117-6430 | [1] | HOSE | |
| 9. | 190-5828 | [1] | HOSE | |
| 10. | 099-5041 | [2] | BOLT (M14X1.5X27-MM) | |
| 11. | 095-2040 | [4] | WASHER | |
| 12. | 137-5541 | [1] | PUMP GP-FUEL PRIMING | |
| 12A. | 7E-2985 | [2] | VALVE AS | |
| 12B. | 1H-8171 | [1] | SEAL-O-RING | |
| 12C. | 6V-1903 | [1] | SEAL-O-RING | |
| 13. | 1P-0436 | [1] | GASKET (FUEL PRIMING PUMP) | |
| 14. | 178-6594 | [1] | BASE | |
| 15. | 178-6595 M | [1] | BOLT (M6X1X30-MM) | |
| 16. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| 17. | 183-8224 | [1] | TUBE | |
| 18. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 19. | 096-2500 | [1] | LOCKWASHER | |
| 20. | 3B-4505 | [1] | LOCKWASHER | |
| 21. | 7X-0796 | [8] | LOCKWASHER | |
| 22. | 5I-7647 | [1] | BRACKET | |
| 23. | 183-8225 | [1] | BRACKET | |
| 24. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 25. | 183-8223 | [1] | TUBE | |
| 26. | 190-5830 | [1] | TUBE | |
| M | METRIC PART | |||
#SEBP29010078
178-6530: FILTER GP-FUEL
For full view, you need register
Parts for your 320C EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 196-8219 | [1] | FILTER AS-FUEL | |
| 1R-0751 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY) | ||
| 2. | 094-9725 | [1] | PLUG | |
| 3. | 095-2038 | [1] | WASHER (7.8X13.5X2-MM THK) | |
| 4. | 094-9726 | [2] | BOLT (M14X1.5X26-MM) | |
| 5. | 095-2040 | [4] | WASHER | |
| 6. | 196-8220 | [1] | BRACKET | |
| 7. | 190-5829 | [1] | HOSE | |
| 8. | 117-6430 | [1] | HOSE | |
| 9. | 190-5828 | [1] | HOSE | |
| 10. | 099-5041 | [2] | BOLT (M14X1.5X27-MM) | |
| 11. | 095-2040 | [4] | WASHER | |
| 12. | 137-5541 | [1] | PUMP GP-FUEL PRIMING | |
| 12A. | 7E-2985 | [2] | VALVE AS | |
| 12B. | 1H-8171 | [1] | SEAL-O-RING | |
| 12C. | 6V-1903 | [1] | SEAL-O-RING | |
| 13. | 1P-0436 | [1] | GASKET (FUEL PRIMING PUMP) | |
| 14. | 178-6594 | [1] | BASE | |
| 15. | 178-6595 M | [1] | BOLT (M6X1X30-MM) | |
| 16. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| 17. | 183-8224 | [1] | TUBE | |
| 18. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| 19. | 096-2500 | [1] | LOCKWASHER | |
| 20. | 3B-4505 | [1] | LOCKWASHER | |
| 21. | 7X-0796 | [8] | LOCKWASHER | |
| 22. | 5I-7647 | [1] | BRACKET | |
| 23. | 183-8225 | [1] | BRACKET | |
| 24. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 25. | 183-8223 | [1] | TUBE | |
| 26. | 190-5830 | [1] | TUBE | |
| M | METRIC PART | |||
#SEBP29010079
212-8657: FILTER GP-FUEL
For full view, you need register
Parts for your 320C EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 196-8219 | [1] | FILTER AS-FUEL | |
| 1A. | 1R-0751 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY) | |
| 1B. | 094-9725 | [1] | PLUG | |
| 1C. | 094-9726 | [2] | BOLT (M14X1.5X26-MM) | |
| 1D. | 095-2038 | [1] | WASHER (7.8X13.5X2-MM THK) | |
| 1E. | 095-2040 | [4] | WASHER | |
| 1F. | 196-8220 | [1] | BRACKET | |
| 2. | 217-5430 | [1] | BRACKET | |
| 3. | 212-8612 | [1] | BRACKET | |
| 4. | 8T-4196 M | [4] | BOLT (M10X1.5X35-MM) | |
| 5. | 190-5830 | [1] | TUBE | |
| 6. | 183-8224 | [2] | TUBE | |
| 7. | 7X-0796 | [8] | LOCKWASHER | |
| 8. | 190-5828 | [1] | HOSE | |
| 9. | 190-5829 | [1] | HOSE | |
| 10. | 094-9022 | [1] | HOSE AS | |
| 11. | 099-5041 | [2] | BOLT (M14X1.5X27-MM) | |
| 12. | 095-2040 | [4] | WASHER | |
| 13. | 137-5541 | [1] | PUMP GP-FUEL PRIMING | |
| 13A. | 1H-8171 | [1] | SEAL-O-RING | |
| 13B. | 6V-1903 | [1] | SEAL-O-RING | |
| 13C. | 7E-2985 | [2] | VALVE AS | |
| 14. | 1P-0436 | [1] | GASKET (FUEL PRIMING PUMP) | |
| 15. | 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | |
| 16. | 178-6595 M | [1] | BOLT (M6X1X30-MM) | |
| 17. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| 18. | 212-8611 | [2] | BOLT | |
| 19. | 096-2500 | [1] | LOCKWASHER | |
| 20. | 3B-4505 | [1] | LOCKWASHER | |
| M | METRIC PART | |||
Information:
AIR INLET AND EXHAUST SYSTEM
MUFFLER GP
Special Instruction
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Caterpillar Parts SIS Catalog 320C :
Truck sale:
288,000
287,325
287,325