235-8317 WIRING GP-CAB S/N BEA1-UP; BDE1-UP; BBL1-UP; BCN1-UP PART OF 235-8329 CAB GP AN ATTACHMENT 320C



ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 320C EXCAVATOR BBL
 320C, 320C L, 320C LN, 320C S Excavators BBL00001-UP (MACHINE) POWERED BY 3066 Engine SEBP2901 320C BBL   (1999)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CAB
184-7622 WIRING GP-CAB
WIRING GP-CAB
211-7989 WIRING GP-CAB
WIRING GP-CAB
235-8317 WIRING GP-CAB
WIRING GP-CHASSIS
198-0858 WIRING GP-CHASSIS
170-6908 WIRING GP-CONSOLE
WIRING GP-CONSOLE
170-6909 WIRING GP-CONSOLE
 

#SEBP29010160
 

235-8317: WIRING GP-CAB

235-8317 WIRING GP-CAB
S/N BEA1-UP; BDE1-UP; BBL1-UP; BCN1-UP
PART OF 235-8329 CAB GP
AN ATTACHMENT
i02174976 SEBP2901
2358317 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 161-3932 [1] METER GP-SERVICE  
2. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
3. 4I-3064 E GUARD (10CM)  
4. 163-6795 [13] STRAP-CABLE  
5. 233-1036 [1] HARNESS AS-CAB  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8806 [3] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2272 [1] PLUG AS-CONNECTOR (4-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2265 [4] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 8T-6693 M [2] SCREW-MACHINE (M5X0.8X16-MM)  
7. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
9. 7Y-5226 M [2] NUT (M5X0.8-THD)  
10. 095-0736 M [2] SCREW-MACHINE (M5X0.8X10-MM)  
11. 096-5962 [2] WASHER-HARD (3.4X7X0.8-MM THK)  
12. 163-6701 [1] PANEL AS-CONTROL  
13. 132-1829 Y [1] ALARM GP (24-VOLT)(FAULT)  
14. 8T-4171 M [1] BOLT (M6X1X12-MM)  
15. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
16. 7K-1181 B [1] STRAP-CABLE  
17. 6V-9669 M [2] SCREW-MACHINE (M3X0.5X8-MM)  
18. 3C-6969 M [2] NUT (M3X0.5-THD)  
19. 3E-9872 M [1] SCREW AS (M4X0.7X12-MM)  
20. 111-4846 [1] CABLE  
21. 6C-3431 [1] ANTENNA  
22. 6C-9077 [1] WASHER  
23. 188-7681 [1] CONTROL GP-WIPER  
24. 5C-2874 M [2] NUT (M5X0.8-THD)  
25. 6C-9081 [2] LOCKWASHER  
26. 176-1919 [1] HARNESS AS-PANEL  
27. 157-3210 [1] PANEL AS-CONTROL  
28. 8T-0286 M [2] BOLT (M5X0.8X8-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29010161
 

198-0858: WIRING GP-CHASSIS

198-0858 WIRING GP-CHASSIS
S/N BEA1-UP; BDE1-UP; BCN1-UP
PART OF 158-8246 VALVE AR-CHECK & RELIEF
FOR USE WITH SMART BOOM
AN ATTACHMENT
i02113740 SEBP2901
1980858 WIRING GP-CHASSIS Parts scheme 1980858 WIRING GP-CHASSIS Parts scheme 1980858 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. [1] HARNESS AS-WIRING (SMARTBOOM)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
2. 201-0631 [1] HARNESS AS-CHASSIS (JUNCTION BOX)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3. 7K-1181 [15] STRAP-CABLE  
4. 3S-2093 [12] STRAP-CABLE  
6. 111-4836 [1] CLIP  
7. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
9. 149-5050 [2] RELAY (24-VOLT)  
12. 161-3128 [1] RELAY (24-VOLT)  
13. 186-4639 [1] SWITCH AS-ROCKER (SMARTBOOM)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  167-3543 [5] TERMINAL (MALE)  
  M   METRIC PART
 

#SEBP29010162
 

170-6908: WIRING GP-CONSOLE

170-6908 WIRING GP-CONSOLE
S/N BEA1-UP; BDE1-UP; BBL1-UP; BCN1-UP
PART OF 171-7371, 188-7305 OPERATOR AR
ALSO AN ATTACHMENT
i01239322 SEBP2901
  For full view, you need register

Parts for your 320C EXCAVATOR:

Pos. Part No Qty Parts name Comments
  170-6909 Y [1] WIRING GP-CONSOLE (LH)  
  170-6910 Y [1] WIRING GP-CONSOLE (RH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP29010163
 

170-6909: WIRING GP-CONSOLE

170-6909 WIRING GP-CONSOLE -LH
S/N BEA1-UP; BDE1-UP; BBL1-UP; BCN1-UP
PART OF 170-6908 WIRING GP-CONSOLE
ALSO AN ATTACHMENT
i01240043 SEBP2901
1706909 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 170-6959 [1] HARNESS AS-OPERATOR CONTROLS (CONSOLE)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8805 [2] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [5] STRAP-CABLE  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
2. 7K-1181 [1] STRAP-CABLE  
3. 163-6795 [1] STRAP-CABLE  
4. 3S-2093 [1] STRAP-CABLE  
 

#SEBP29010164
 

170-6910: WIRING GP-CONSOLE

170-6910 WIRING GP-CONSOLE -RH
S/N BEA1-UP; BDE1-UP; BBL1-UP; BCN1-UP
PART OF 170-6908 WIRING GP-CONSOLE
ALSO AN ATTACHMENT
i01240086 SEBP2901
1706910 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 163-6795 [1] STRAP-CABLE  
2. 6V-5738 D TRIM-EDGE (.2M)  
3. 163-6710 [1] SWITCH AS-TOGGLE (AEC AUTO/MANUAL)  
4. 163-6711 [1] SWITCH AS-TOGGLE (BACK-UP THROTTLE)  
5. 224-5035 [1] HARNESS AS  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
6. 9G-7641 Y [1] SWITCH GP-START (ENGINE, KEY)  
7. 163-6702 [1] PANEL AS  
  170-9324 [1] LAMP AS-INDICATOR (24-VOLT, 3-WATT)(CONSOLE)  
8. 185-9208 [1] KNOB AS (ENGINE SPEED)  
9. 106-0107 [1] SWITCH GP-ROTARY (ENGINE SPEED)  
  3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  7Y-5464 [1] WASHER (12.2X15.4X0.5-MM THK)  
  8T-8737 [1] PLUG-SEAL  
  106-0210 [1] SEAL  
10. 170-6828 [1] HARNESS AS-SWITCH (ENGINE START)  
11. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN)  
12. 3S-2093 [3] STRAP-CABLE  
13. 7K-1181 [2] STRAP-CABLE  
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
 

#SEBP29010165
 

170-6910: WIRING GP-CONSOLE

170-6910 WIRING GP-CONSOLE -RH
S/N BEA1-UP; BDE1-UP; BBL1-UP; BCN1-UP
PART OF 170-6908 WIRING GP-CONSOLE
AN ATTACHMENT
i02253456 SEBP2901
1706910 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 163-6795 [1] STRAP-CABLE  
2. 6V-5738 B TRIM-EDGE  
3. 283-3074 [1] SWITCH AS-TOGGLE (BACK-UP EPR VALVE)  
4. 163-6711 [1] SWITCH AS-TOGGLE (BACK-UP THROTTLE)  
5. 231-5804 [1] HARNESS AS-CONSOLE (RH)  
  204-1856 [1] CONDUIT  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  3S-2093 [15] STRAP-CABLE  
  7K-1181 [1] STRAP-CABLE  
6. 9G-7641 Y [1] SWITCH GP-START (ENGINE, KEY)  
7. 200-2555 [1] PANEL  
8. 200-2556 [1] PLATE (THROTTLE POSITION)  
9. 106-0107 Y [1] SWITCH GP-ROTARY (ENGINE SPEED)  
10. 170-6828 [1] HARNESS AS-SWITCH (ENGINE START)  
11. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN)  
12. 3S-2093 [2] STRAP-CABLE  
13. 7K-1181 [2] STRAP-CABLE  
14. 185-9208 [1] KNOB AS  
15. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 097-5812 [1] SPACER (26X32X2-MM THK)  
17. 220-5815 [6] SCREW-PAN HEAD  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP29010166
 

163-6638: WIRING GP-FINE SWING

163-6638 WIRING GP-FINE SWING
S/N BEA1-UP; BDE1-UP; BBL1-UP; BCN1-UP
PART OF 137-0961, 137-0962, 137-0963, 190-5317 CHASSIS AR, 158-9003 VALVE AR-SWING
ALSO AN ATTACHMENT
i01267970 SEBP2901
1636638 WIRING GP-FINE SWING Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 7Y-8109 [1] BRACKET AS  
2. 213-0715 [1] HARNESS AS-SOLENOID (FINE SWING)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
4. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
5. 111-4837 [2] CLIP  
6. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
7. 163-6722 [1] SWITCH AS-ROCKER (FINE SWING CONTROL)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  167-3543 [5] TERMINAL (MALE)  
  M   METRIC PART
 

#SEBP29010167
 

211-7505: WIRING GP-QUICK COUPLER

211-7505 WIRING GP-QUICK COUPLER
S/N BEA1-UP; BDE1-UP; BBL1-UP; BCN1-UP
PART OF 187-5090 CONTROL AR-COUPLER
AN ATTACHMENT
i01605213 SEBP2901
2117505 WIRING GP-QUICK COUPLER Parts scheme 2117505 WIRING GP-QUICK COUPLER Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

Pos. Part No Qty Parts name Comments
2. 7X-2619 M [4] BOLT (M6X1X10-MM)  
3. 155-2715 [1] SWITCH AS-ROTARY (QUICK COUPLER)  
  3E-3377 [1] WEDGE-RECEPTACLE LOCK (4-PIN)  
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
4. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
5. 207-4765 [1] BRACKET AS  
6. 161-3128 [4] RELAY (24-VOLT)  
7. 6V-8369 [1] NUT (7/16-28-THD)  
8. 2H-3920 [1] LOCKWASHER  
9. 158-4212 [1] FILM-INSTRUCTION (QUICK COUPLER)  
10. 134-0394 [1] KNOB-CONTROL  
11. 113-4683 [1] ALARM AS  
12. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
13. 8T-0325 M [1] BOLT (M5X0.8X14-MM)  
14. 155-4572 [1] HARNESS AS-WIRING (QUICK COUPLER ALARM)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
15. 3S-2093 [2] STRAP-CABLE  
16. 185-8636 [1] COVER  
17. 206-7599 [1] HARNESS AS-WIRING (QUICK COUPLER LOCKOUT)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  M   METRIC PART
 

#SEBP29010168
 

163-6640: WIRING GP-REFUELING PUMP

163-6640 WIRING GP-REFUELING PUMP
S/N BEA1-UP; BDE1-UP; BBL1-UP; BCN1-UP
PART OF 163-7736 PUMP AR-REFUELING
AN ATTACHMENT
i01245804 SEBP2901
1636640 WIRING GP-REFUELING PUMP Parts scheme 1636640 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
2. 3S-2093 [12] STRAP-CABLE  
3. 132-1827 [1] WIRE AS  
4. 116-0095 [1] SWITCH AS (REFUELING START)  
  116-0096 [1] HARNESS AS-WIRING (REFUELING PUMP, START)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
5. 116-0097 [1] SWITCH AS (REFUELING STOP)  
  116-0098 [1] HARNESS AS-WIRING (REFUELING PUMP, STOP)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUGE AS, WEDGE & INTERFACE SEAL)
6. 204-1686 [1] HARNESS AS-SWITCH (REFUELING PUMP RELAY)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUGE AS, WEDGE & INTERFACE SEAL)
7. 9X-3495 [1] CLIP AS  
8. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
9. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
10A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
11. 7X-2619 M [4] BOLT (M6X1X10-MM)  
12. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
13. 165-4026 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
  4F-2294 [2] NUT-JAM (5/16-24-THD)  
  6V-8186 [2] NUT-FULL (5/16-24-THD)  
  6V-8378 [2] NUT (10-32-THD)  
  M   METRIC PART
 

#SEBP29010169
 

114-1488: DRIVE GP-FINAL

114-1488 DRIVE GP-FINAL
S/N BEA1-UP; BDE1-UP; BCN1-UP
WITHOUT MOTOR
PART OF 135-6214 DRIVE GP-FINAL
i01026561 SEBP2901
1141488 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
2. 096-1773 B [1] SHIM (0.15-MM THK)  
  096-1774 B [1] SHIM (0.3-MM THK)  
  096-1775 B [1] SHIM (0.4-MM THK)  
  096-1776 B [1] SHIM (0.5-MM THK)  
  096-1777 B [1] SHIM (0.6-MM THK)  
  096-1778 B [1] SHIM (0.7-MM THK)  
  096-1779 B [1] SHIM (0.8-MM THK)  
  096-1780 B [1] SHIM (1-MM THK)  
  096-1781 B [1] SHIM (1.6-MM THK)  
3. 191-3236 [1] HOUSING  
4. 114-1497 [1] SEAL GP-DUO-CONE  
5. 168-8451 [2] BALL BEARING  
6. 191-3235 [1] HOUSING  
7. 114-1539 [6] PIN-DOWEL  
8. 148-4715 [1] GEAR-COUPLING (55-TEETH)  
9. 6D-0692 [1] SEAL-O-RING  
10. 7Y-1433 [1] CARRIER  
11. 6V-3303 M [14] BOLT (M16X2X60-MM)  
12. 7Y-0223 [3] SHAFT-PLANETARY  
13. 094-1542 [6] BEARING-ROLLER  
14. 7Y-1431 [3] GEAR-PLANETARY (30-TEETH)  
15. 094-1528 M [6] WASHER (53X84X1-MM THK)  
16. 095-0891 [6] PIN-SPRING  
17. 6I-6585 [3] GEAR-PLANETARY (44-TEETH)  
18. 094-0616 [3] BEARING AS-ROLLER  
19. 3E-2338 [2] PLUG-PIPE  
20. 7M-8485 [2] SEAL-O-RING  
21. 7Y-1426 [1] COVER  
22. 7Y-0225 [3] SHAFT-PLANETARY  
23. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
24. 094-0580 [1] PLATE (10-MM THK)  
25. 6I-6583 [1] GEAR-SUN (13-TEETH)  
26. 7Y-1430 [1] GEAR-SUN (17-TEETH)  
27. 7Y-1558 [1] SPACER (90X119.6X7.5-MM THK)  
28. 7Y-1432 [1] CARRIER  
29. 7X-2568 M [16] BOLT (M20X2.5X180-MM)  
30. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
31. 1U-8846 B SEALANT-GASKET  
32. 095-1270 M [2] SETSCREW-SOCKET (M12X1.75X30-MM)  
33. 102-6454 [1] GEAR-RING (104-TEETH)  
34. 102-6456 [1] GEAR-RING (79-TEETH)  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 320C :

WIRING GP-CAB
211-7989 WIRING GP-CAB
WIRING GP-CAB
184-7622 WIRING GP-CAB
WIRING GP-BOOM FLOAT
186-4638 WIRING GP-BOOM FLOAT
WIRING GP-BOOM
224-1113 WIRING GP-BOOM
WIRING GP-BOOM
214-5104 WIRING GP-BOOM
WIRING GP-AUXILIARY CONTROL
204-1662 WIRING GP-AUXILIARY CONTROL
WIRING GP-AUXILIARY CONTROL
204-1662 WIRING GP-AUXILIARY CONTROL
WIRING GP-AUXILIARY CONTROL
204-1662 WIRING GP-AUXILIARY CONTROL
WIRING GP-CHASSIS
198-0858 WIRING GP-CHASSIS
170-6908 WIRING GP-CONSOLE
WIRING GP-CONSOLE
170-6909 WIRING GP-CONSOLE
WIRING GP-CONSOLE
170-6910 WIRING GP-CONSOLE
WIRING GP-CONSOLE
170-6910 WIRING GP-CONSOLE
WIRING GP-FINE SWING
163-6638 WIRING GP-FINE SWING
WIRING GP-QUICK COUPLER
211-7505 WIRING GP-QUICK COUPLER
WIRING GP-REFUELING PUMP
163-6640 WIRING GP-REFUELING PUMP

Truck sale:

 
 
Caterpillar 320C
- Crawler Excavators
WESTERN STATES EQUIPMENT
 
288,000 
Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Caterpillar 320C, Crawler Excavators, Construction
45,597 
Caterpillar 320C, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA
 
287,325 
Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
 
287,325 
Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.