AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

122-6492 WIRING GP-PLATFORM S/N 7SR752-2267 PART OF 122-6441, 122-6471 CAB AR-ENCLOSED ROPS, 153-5360 PLATFORM AR AN ATTACHMENT 928G


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
AXLE GP

WHEEL LOADER 928G WHEEL LOADER 7SR
 928G Wheel Loader 7SR00001-02267 (MACHINE) POWERED BY 3116 Engine SEBP2904 928G 7SR   (1996)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-PLATFORM
122-6492 WIRING GP-PLATFORM
WIRING GP-PLATFORM
122-6492 WIRING GP-PLATFORM
WIRING GP-PLATFORM
122-6492 WIRING GP-PLATFORM
WIRING GP-PLATFORM
122-6497 WIRING GP-PLATFORM
WIRING GP-PLATFORM
171-6176 WIRING GP-PLATFORM
WIRING GP-POWER TRAIN
113-3650 WIRING GP-POWER TRAIN
 

#SEBP29040250
 

122-6492: WIRING GP-PLATFORM

122-6492 WIRING GP-PLATFORM
S/N 7SR752-2267
PART OF 122-6441, 122-6471 CAB AR-ENCLOSED ROPS, 153-5360 PLATFORM AR
AN ATTACHMENT
i00963212 SEBP2904
1226492 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 928G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3920 [1] LOCKWASHER  
2. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(AIR SEAT)  
  9B-7233 [2] LOCKWASHER  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
3. 154-5629 [1] ASHTRAY AS  
4. 6G-4195 [1] SWITCH AS-LIMIT (SERVICE BRAKE)  
5. 6V-8369 [1] NUT (7/16-28-THD)  
6. 9C-9785 [1] BUMPER  
7. 068-4209 [2] SCREW (8-32X0.75-IN)  
8. 103-2543 E SEAL (3CM)  
9. 106-8704 [1] SUPPRESSOR AS-ARC  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
10. 107-6013 [1] SEAL  
11. 107-6021 [1] HOUSING AS  
12. 107-6031 [1] SWITCH AS-ROCKER (KICKOUT)(BUCKET)  
  111-7899 [1] GASKET  
13. 107-6072 [1] PLATE  
14. 109-2356 C [6] PLUG  
15. 110-0553 B [1] WIRE AS  
16. 110-6109 [1] KNOB-CONTROL (TEMPERATURE)  
16A. 110-6109 [1] KNOB-CONTROL (FAN SPEED)  
17. 110-7890 [1] SWITCH AS-ROTARY (24-VOLT)(FAN SPEED)  
  3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
  8T-8737 [1] PLUG-SEAL  
  9W-0852 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
18. 111-7899 C [6] GASKET  
19. 114-3951 [1] PLATE  
20. 115-1748 [1] LAMP (24-VOLT, 3-WATT)(TEMPERATRE CONTROL)  
20A. 115-1748 [1] LAMP (24-VOLT, 3-WATT)(FAN SPEED CONTROL)  
21. 116-7471 [1] PULLER-MINIFUSE  
22. 117-3274 [1] PLUG AS-CONNECTOR (6-PIN, JUMPER)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
  3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
  5P-5677 WIRE (18-GA, BLACK)(0.3M)  
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [2] PLUG-SEAL  
23. 117-3787 [4] KNOB  
24. 117-3788 [4] RECEPTACLE  
25. 117-3789 [4] RETAINER  
26. 118-7362 [1] GROMMET-SPLIT  
27. 134-4096 C [1] PLATE AS  
28. 143-9674 C [1] FILM-CONTROLS (CONSOLE, RH)(RH CONSOLE)  
29. 148-5689 [1] GROMMET-SPLIT  
30. 155-0638 [1] FILM-IDENTIFICATION (FUSE/RELAY)  
31. 158-5089 [4] RELAY AS (24-VOLT)  
32. 167-0138 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(MAIN POWER RELAY)  
33. 170-7064 [1] BRACKET AS  
34. 171-8745 [1] HARNESS AS (INSTRUMENT PANEL)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [6] KIT-CONNECTING PLUG (6-PIN)  
  155-2265 [5] KIT-CONNECTING PLUG (8-PIN)  
  155-2255 [5] KIT-CONNECTING PLUG (12-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8803 [3] KIT-RECEPTACLE (3-PIN)  
  102-8804 [3] KIT-RECEPTACLE (4-PIN)  
  102-8805 [4] KIT-RECEPTACLE (6-PIN)  
  102-8806 [2] KIT-RECEPTACLE (8-PIN)  
  102-8801 [3] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  8T-9834 [1] PLUG AS-CONNECTOR (40-PIN)  
  112-9609 [1] BLOCK-MICRORELAY  
  112-9610 [2] LOCK-MICRORELAY  
  113-8490 [14] FUSE (10-AMPERE)  
  113-8491 [6] FUSE (15-AMPERE)  
  113-8492 [2] FUSE (20-AMPERE)  
  116-4157 [1] BLOCK-RELAY & FUSE  
  116-4158 [1] LOCK-RELAY & FUSE  
  124-9636 [1] BLOCK-MINIFUSE  
  124-9637 [1] LOCK-MINIFUSE  
35. 171-8746 [1] HARNESS AS-SWITCH (SERVICE BRAKE, STOP LIGHT)(BRAKE SWITCH)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
36. 173-7518 [1] FILM-PANEL (SUPPORT PLATE COVER)(BLACK COVER)  
37. 2G-5298 B [2] WIRE AS  
38. 2N-3477 [2] SCREW-MACHINE (6-32X1.25-IN)  
39. 4B-5324 [2] WASHER (3.9X9.6X1.2-MM THK)  
40. 4P-7581 [1] CLIP (LADDER)  
41. 4P-8134 [4] CLIP (LADDER)  
42. 6V-8837 M [1] BOLT (M6X1X16-MM)  
43. 6Y-6584 [1] STRAP AS-GROUND  
44. 7D-6922 [2] LOCKNUT (6-32-THD)  
45. 7K-1181 [45] STRAP-CABLE  
46. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
47. 8T-4133 M [2] NUT (M10X1.5-THD)  
48. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
49. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
50. 8T-4205 [7] WASHER-HARD (7.2X14.5X2-MM THK)  
51. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
52. 9X-1046 M [4] SCREW (M4X0.7X18-MM)  
53. 9X-2042 M [8] SCREW-TRUSS HEAD (M6X1X12-MM)  
54. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29040251
 

122-6497: WIRING GP-PLATFORM

122-6497 WIRING GP-PLATFORM
S/N 7SR1-2267
PART OF 122-6314 CANOPY AR, 118-1124 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i00520963 SEBP2904
1226497 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 928G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8805 [2] KIT-RECEPTACLE (6-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
2. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
3. 154-5629 [1] ASHTRAY AS  
4. 6G-4195 [1] SWITCH AS-LIMIT  
  3L-8187 [3] LOCKWASHER  
  6V-8373 [3] SCREW-MACHINE (6-32X0.187-IN)  
5. 8T-8737 [12] PLUG-SEAL  
6. 9C-9785 [1] BUMPER  
7. 068-4209 [2] SCREW (8-32X0.75-IN)  
8. 103-2543 E SEAL (3CM)  
9. 106-8704 [1] SUPPRESSOR AS-ARC  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
10. 107-6013 [1] SEAL  
11. 107-6021 [1] HOUSING AS  
12. 107-6031 [1] SWITCH AS-ROCKER (KICKOUT)(SELECTOR)  
  111-7899 [1] GASKET  
13. 107-6072 [1] PLATE  
14. 109-2356 B [4] PLUG  
15. 110-0553 B [1] WIRE AS  
16. 111-7899 B [4] GASKET  
17. 116-7471 [1] PULLER-MINIFUSE  
18. 117-3787 [4] KNOB  
19. 117-3788 [4] RECEPTACLE  
20. 117-3789 [4] RETAINER  
21. 118-7362 [1] GROMMET-SPLIT  
22. 126-8472 E SEAL (14CM)  
23. 134-4096 [1] PLATE AS  
24. 143-9675 [1] FILM-CONTROLS (CONSOLE, RH)  
25. 148-5689 [1] GROMMET-SPLIT  
26. 155-0638 [1] FILM-IDENTIFICATION  
27. 158-5089 [4] RELAY AS (24-VOLT)  
28. 160-6520 [1] PLATE  
29. 167-0138 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(SOLENOID)  
30. 170-7064 [2] BRACKET AS  
31. 171-8745 [1] HARNESS AS  
32. 171-8746 [1] HARNESS AS-SWITCH (SERVICE BRAKE, STOP LIGHT)  
33. 173-7518 [1] FILM-PANEL (SUPPORT PLATE COVER)  
34. 2G-5298 B [2] WIRE AS  
35. 2N-3477 [2] SCREW-MACHINE (6-32X1.25-IN)  
36. 4B-5324 [2] WASHER (3.9X9.6X1.2-MM THK)  
37. 4P-7581 [1] CLIP (LADDER)  
38. 4P-8134 [4] CLIP (LADDER)  
39. 6V-8837 M [1] BOLT (M6X1X16-MM)  
40. 6Y-6584 [1] STRAP AS-GROUND  
41. 7D-6922 [2] LOCKNUT (6-32-THD)  
42. 7K-1181 [44] STRAP-CABLE  
43. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
44. 8T-4133 M [2] NUT (M10X1.5-THD)  
45. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
46. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
47. 8T-4205 [7] WASHER-HARD (7.2X14.5X2-MM THK)  
48. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
49. 9X-1046 M [4] SCREW (M4X0.7X18-MM)  
50. 9X-2042 M [8] SCREW-TRUSS HEAD (M6X1X12-MM)  
51. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29040252
 

171-6176: WIRING GP-PLATFORM

171-6176 WIRING GP-PLATFORM
S/N 7SR1-2267
PLATFORM
PART OF 122-6314 CANOPY AR
AN ATTACHMENT
i01117708 SEBP2904
1716176 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 928G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-2659 M [4] LOCKNUT (M4X0.7-THD)  
2. 8T-8737 B [26] PLUG-SEAL  
3. 108-3320 [1] SWITCH AS-ROTARY (24-VOLT, 5-POSITION)  
  3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
  9W-0852 [8] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
4. 109-2356 B [4] PLUG  
5. 110-6109 [1] KNOB-CONTROL  
6. 111-7899 B [4] GASKET  
7. 115-1748 [2] LAMP (24-VOLT, 3-WATT)  
8. 118-7238 [1] SWITCH AS-NEUTRALIZER (XMSN OVERRIDE CONTROL)  
  111-7899 [1] GASKET  
9. 148-0641 Y [1] MODULE GP-WARNING INDICATOR (WITH ALARM)  
10. 148-0642 Y [1] MODULE GP-WARNING INDICATOR (WITHOUT ALARM)  
11. 156-7183 [1] PLATE AS (LH)  
12. 156-7184 [1] PLATE AS (RH)  
13. [1] FILM-CONTROLS (DASH, LH)  
14. 157-1997 [4] SPACER (4.34X15.88X6.34-MM THK)  
15. 172-6557 [1] FILM-IDENTIFICATION (DASH, RH)  
16. 202-1129 M [8] SCREW-TRUSS HEAD (M4X0.7X18-MM)  
17. 193-8110 [1] HARNESS AS-PANEL  
  155-2265 [4] KIT-CONNECTING PLUG (8-PIN)  
    (KIT INCLUDES PLUG AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (KIT INCLUDES PLUG AS & WEDGE)
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (KIT INCLUDES PLUG AS & WEDGE)
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (KIT INCLUDES PLUG AS & WEDGE)
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
    (KIT INCLUDES PLUG AS & WEDGE)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
18. 1P-7326 [4] WASHER (4.32X9.52X1.52-MM THK)  
19. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
20. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
21. 102-8806 [2] KIT-RECEPTACLE (8-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
22. 4P-7581 [1] CLIP (LADDER)  
23. 4P-8134 [2] CLIP (LADDER)  
24. 7K-1181 [8] STRAP-CABLE  
25. 8T-4199 M [3] BOLT (M8X1.25X12-MM)  
26. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
27. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29040253
 

113-3650: WIRING GP-POWER TRAIN

113-3650 WIRING GP-POWER TRAIN
S/N 7SR1-664
PART OF 122-6451 CHASSIS AR
i00474402 SEBP2904
1133650 WIRING GP-POWER TRAIN Parts scheme 1133650 WIRING GP-POWER TRAIN Parts scheme
  For full view, you need register

Parts for your 928G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-7693 [1] SWITCH AS-PRESSURE (BRAKE)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 3J-1907 [2] SEAL-O-RING  
3. 3K-0360 [2] SEAL-O-RING  
4. 3Y-2888 [1] CONNECTOR  
5. 4B-2048 [2] NUT (10-32-THD)  
6. 5H-6565 [1] CIRCUIT BREAKER AS (30-AMPERE)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
7. 5L-4507 [6] SCREW-MACHINE (10-32X0.875-IN)  
8. 6V-2455 [1] SENSOR GP-SPEED (ENGINE)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E SLEEVE  
9. 7K-1181 [26] STRAP-CABLE  
10. 7W-1238 [1] SWITCH AS-PRESSURE (ENGINE OIL)(ENGINE)  
11. 9S-0174 [2] CIRCUIT BREAKER AS (60-AMPERE)  
    (EACH INCLUDES)
  1H-3244 [2] LOCKWASHER  
  6V-8365 [2] SCREW-MACHINE (1/4-28X0.5-IN)  
12. 104-3007 [1] SENDER AS-TEMPERATURE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
13. 113-3893 [1] HARNESS AS  
14. 113-3894 [1] HARNESS AS-TRANSMISSION  
15. 118-3534 [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  5C-2890 M [2] NUT (M6X1-THD)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E SLEEVE  
  5C-2890 M [2] NUT (M6X1-THD)  
16. 118-5144 [1] SENDER AS-TEMPERATURE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
17. 122-6375 [1] PLATE AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
18. 4B-4274 [6] WASHER (5.5X13X1.2-MM THK)  
19. 4P-7581 [5] CLIP (LADDER)  
20. 4P-8134 [12] CLIP (LADDER)  
21. 5C-2890 M [2] NUT (M6X1-THD)  
22. 7V-5628 [1] PLATE (TOP)  
23. 6D-4244 [1] CLIP (LOOP)  
24. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
25. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
26. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
27. 8T-4138 M [2] BOLT (M6X1X20-MM)  
28. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
29. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
30. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
31. 7V-6089 [2] CLAMP  
32. 7X-2534 M [2] BOLT (M6X1X50-MM)  
33. 122-6493 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
34. 135-3327 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
35. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
36. 7X-2552 M [1] BOLT (M16X2X30-MM)  
37. 8M-2770 [1] CLIP (LOOP)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP29040254
 

113-3650: WIRING GP-POWER TRAIN

113-3650 WIRING GP-POWER TRAIN
S/N 7SR665-1199
PART OF 165-7639 ALTERNATOR GP-CHARGING, 122-6451 CHASSIS AR, 113-3613 LIGHTING AR-ROADING
ALSO AN ATTACHMENT
i00940984 SEBP2904
1133650 WIRING GP-POWER TRAIN Parts scheme
  For full view, you need register

Parts for your 928G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-7693 [1] SWITCH AS-PRESSURE (BRAKE)  
  102-8803 H [1] KIT-RECEPTACLE (3-PIN)  
  3E-3371 H [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 H [3] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 3J-1907 [1] SEAL-O-RING  
3. 3K-0360 [2] SEAL-O-RING  
4. 3Y-2888 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
6. 147-1773 C [1] CIRCUIT BREAKER AS (30-AMPERE)  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
  6V-8378 [2] NUT (10-32-THD)  
  8F-1434 [2] LOCKWASHER  
7. 5L-4507 [4] SCREW-MACHINE (10-32X0.875-IN)  
8. 6V-2455 [1] SENSOR GP-SPEED (ENGINE)  
  102-8802 J [1] KIT-RECEPTACLE (2-PIN)  
  8T-8729 J [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 BE SLEEVE  
  3E-3365 J [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
9. 7K-1181 [27] STRAP-CABLE  
10. 7W-1238 [1] SWITCH AS-PRESSURE (ENGINE OIL)  
11. 9S-0174 [2] CIRCUIT BREAKER AS (60-AMPERE)  
    (EACH INCLUDES)
  1H-3244 [2] LOCKWASHER  
  6V-8365 [2] SCREW-MACHINE (1/4-28X0.5-IN)  
12. 104-3007 [1] SENDER AS-TEMPERATURE  
  102-8802 J [1] KIT-RECEPTACLE (2-PIN)  
  8T-8729 J [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  3E-3365 J [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
13. 154-5206 C [1] HARNESS AS-ENGINE  
14. 113-3894 [1] HARNESS AS-TRANSMISSION  
15. 118-3534 [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
  102-8802 J [1] KIT-RECEPTACLE (2-PIN)  
  8T-8729 J [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  5C-2890 M [2] NUT (M6X1-THD)  
  9X-1386 BE SLEEVE  
  3E-3365 J [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
16. 118-5144 [1] SENDER AS-TEMPERATURE  
  102-8802 J [1] KIT-RECEPTACLE (2-PIN)  
  8T-8729 J [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  3E-3365 J [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
17. 150-3597 C [1] PLATE AS  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
18. 4B-4274 [6] WASHER (5.5X13X1.2-MM THK)  
19. 4P-7581 [5] CLIP (LADDER)  
20. 4P-8134 C [14] CLIP (LADDER)  
22. 7V-5628 [1] PLATE (TOP)  
23. 6D-4244 [1] CLIP (LOOP)  
24. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
25. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
26. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
27. 8T-4138 M [2] BOLT (M6X1X20-MM)  
28. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
29. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
30. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
31. 7V-6089 [2] CLAMP  
32. 7X-2534 M [2] BOLT (M6X1X50-MM)  
34. 135-3327 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
35. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
36. 7X-2552 M [1] BOLT (M16X2X30-MM)  
37. 8M-2770 C [1] CLIP (LOOP)  
38. 8T-8799 [5] BOOT (RED)  
39. 9W-1795 C [1] BOOT  
40. 9X-8486 C [2] SCREW-MACHINE (8-32X0.75-IN)  
41. 131-3201 C [2] BOOT  
   
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  H   KIT MARKED H INCLUDES PART(S) MARKED H
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  M   METRIC PART
 

#SEBP29040255
 

113-3650: WIRING GP-POWER TRAIN

113-3650 WIRING GP-POWER TRAIN
S/N 7SR1-2267
PART OF 165-7639 ALTERNATOR GP-CHARGING
AN ATTACHMENT
i01237593 SEBP2904
1133650 WIRING GP-POWER TRAIN Parts scheme 1133650 WIRING GP-POWER TRAIN Parts scheme
  For full view, you need register

Parts for your 928G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-1907 [1] SEAL-O-RING  
2. 3K-0360 [2] SEAL-O-RING  
3. 6V-2455 [1] SENSOR GP-SPEED (ENGINE)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 BE SLEEVE (14CM)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
4. 7K-1181 [27] STRAP-CABLE  
5. 7V-5628 [1] PLATE (TOP)  
6. 7V-6089 [2] CLAMP  
7. 7W-1238 [1] SWITCH AS-PRESSURE (ENGINE OIL)  
8. 8T-8799 [5] BOOT (RED)  
9. 9W-1795 [1] BOOT  
10. 104-3007 [1] SENDER AS-TEMPERATURE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
11. 118-3534 [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
12. 118-5144 [1] SENDER AS-TEMPERATURE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
13. 131-3201 [2] BOOT  
14. 135-3327 [1] PLATE AS  
15. 147-1773 [1] CIRCUIT BREAKER AS (30-AMPERE)  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
  6V-8378 [2] NUT (10-32-THD)  
  8F-1434 [2] LOCKWASHER  
16. 150-3597 [1] PLATE AS  
17. 154-5206 [1] HARNESS AS-ENGINE  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
18. 171-2208 [2] CIRCUIT BREAKER AS (60-AMPERE)  
    (EACH INCLUDES)
  1H-3244 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
19. 172-0329 [1] HARNESS AS-TRANSMISSION  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
20. 174-4312 C [1] SWITCH AS-PRESSURE (BRAKE)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
21. 148-8331 [1] CONNECTOR AS  
  3Y-2888 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
22. 4B-4274 [6] WASHER (5.5X13X1.2-MM THK)  
23. 4P-7581 [5] CLIP (LADDER)  
24. 4P-8134 [14] CLIP (LADDER)  
25. 5L-4507 [4] SCREW-MACHINE (10-32X0.875-IN)  
26. 6D-4244 [1] CLIP (LOOP)  
27. 7X-2534 M [2] BOLT (M6X1X50-MM)  
28. 7X-2552 M [1] BOLT (M16X2X30-MM)  
29. 8M-2773 [1] CLIP (LOOP)  
30. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
32. 8T-4136 CM [1] BOLT (M10X1.5X25-MM)  
33. 8T-4137 CM [5] BOLT (M10X1.5X20-MM)  
34. 8T-4138 M [2] BOLT (M6X1X20-MM)  
35. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
36. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
37. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
38. 9X-8486 [2] SCREW-MACHINE (8-32X0.75-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP29040256
 

113-3651: WIRING GP-REAR

113-3651 WIRING GP-REAR
S/N 7SR1-2267
PART OF 122-6451 CHASSIS AR
i00474411 SEBP2904
1133651 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 928G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-0360 [1] SEAL-O-RING  
2. 6K-0806 [15] STRAP-CABLE  
3. 8C-8457 M [5] SCREW-MACHINE (M5X0.8X14-MM)  
4. 8T-0328 [5] WASHER-HARD (5.5X10X1-MM THK)  
5. 9R-7240 [1] GASKET  
6. 104-3008 [1] SENDER AS-TEMPERATURE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT SERVICES RECEPTACLE AS. & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
7. 122-6469 [1] PLATE AS  
  8T-3490 M [5] NUT-WELD (M10X1.5-THD)  
  9G-9155 [2] CLIP  
8. 148-9263 [2] GROMMET-SPLIT  
9. 166-7446 [1] SENDER AS-FUEL LEVEL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT SERVICES RECEPTACLE AS. & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
10. 171-2316 [1] HARNESS AS-CHASSIS  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT SERVICES RECEPTACLE AS. & WEDGE)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (KIT SERVICES RECEPTACLE AS. & WEDGE)
  3S-2093 [5] STRAP-CABLE  
  8T-8737 [24] PLUG-SEAL  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (KIT SERVICES PLUG AS. & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (KIT SERVICES PLUG AS. & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (KIT SERVICES PLUG AS. & WEDGE)
11. 8M-2773 [1] CLIP (LOOP)  
12. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
  M   METRIC PART
 

#SEBP29040257
 

132-1328: WIRING GP-RIDE CONTROL

132-1328 WIRING GP-RIDE CONTROL
S/N 7SR1-2267
RIDE CONTROL
PART OF 128-0263 CONTROL AR-RIDE
AN ATTACHMENT
i00512009 SEBP2904
1321328 WIRING GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your 928G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [2] STRAP-CABLE  
2. 106-8704 [1] SUPPRESSOR AS-ARC  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 107-6030 [1] SWITCH AS (RIDE CONTROL)  
  111-7899 [1] GASKET  
4. 125-8232 [1] HARNESS AS-RIDE CONTROL  
5. 4P-7581 [1] CLIP (LADDER)  
6. 158-5089 [1] RELAY AS (24-VOLT)  
 

#SEBP29040258
 

113-3787: WIRING GP-SECONDARY STEERING

113-3787 WIRING GP-SECONDARY STEERING
S/N 7SR1-2267
PART OF 118-1100 STEERING AR, 134-3926 STEERING AR-SECONDARY
AN ATTACHMENT
i00474527 SEBP2904
1133787 WIRING GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your 928G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-4393 [1] LOCKWASHER  
2. 3E-0154 Y [1] SWITCH GP-MAGNETIC  
3. 3E-5184 Y [1] CONTROL GP-SECONDARY STEERING  
4. 135-3327 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
5. 7K-1181 [6] STRAP-CABLE  
6. 111-0161 [1] HOUSING  
7. 4E-3184 [1] CABLE AS  
  1M-6119 [2] BOLT (5/16-18X1.375-IN)  
  1M-6120 [2] NUT (5/16-18-THD)  
  5P-0746 CABLE (0-GA, BLACK)(30CM)  
  7N-5274 [1] COVER AS-TERMINAL (BLACK)  
  7X-1169 [1] TERMINAL AS-BATTERY (NEGATIVE)  
  8N-1725 [1] COVER AS-TERMINAL (RED)  
  8T-9758 [1] TERMINAL AS (POSITIVE)  
8. 114-3947 [1] PLATE  
9. 115-1560 [1] SWITCH AS-SECONDARY STEERING  
  111-7899 [1] GASKET  
10. 115-1748 [2] LAMP (24-VOLT, 3-WATT)  
11. 118-5597 [1] DIODE AS  
12. 138-6349 [1] CABLE AS  
  1S-7251 [2] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  5P-0747 CABLE (00-GA, BLACK)(80CM)  
13. 118-1098 [1] PLATE  
14. 128-8865 [1] HARNESS AS-CHASSIS (SECONDARY STEERING)  
15. 130-7935 [1] CABLE AS  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  5P-0761 CABLE (00-GA, RED)(75CM)  
  8C-5917 [1] TERMINAL AS-BATTERY (POSITIVE)  
  8N-0869 [1] COVER-TERMINAL (RED)  
  9G-0004 [1] COVER AS-TERMINAL (RED)  
16. 130-7936 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  5P-0761 CABLE (00-GA, RED)(175CM)  
  6V-2722 D TUBE-HEAT SHRINK (25.4-MM DIA)(0.1M)  
  8N-0869 [1] COVER-TERMINAL (RED)  
17. 130-7937 [1] CABLE AS  
  1S-7252 [2] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  5P-0761 CABLE (00-GA, RED)(65CM)  
  8N-0869 [2] COVER-TERMINAL (RED)  
18. 130-7938 [1] CABLE AS  
  1S-7252 [2] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  5P-0747 CABLE (00-GA, BLACK)(42CM)  
19. 3T-0050 [1] CLIP  
20. 4P-7581 [2] CLIP (LADDER)  
21. 4P-8134 [1] CLIP (LADDER)  
22. 5C-8312 M [1] NUT (M4X0.7-THD)  
23. 6D-3479 [9] CLIP (LOOP)  
24. 7X-2552 M [1] BOLT (M16X2X30-MM)  
25. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
27. 8T-4133 M [1] NUT (M10X1.5-THD)  
28. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
29. 8T-4138 M [2] BOLT (M6X1X20-MM)  
30. 8T-4171 M [4] BOLT (M6X1X12-MM)  
31. 8T-7963 M [3] LOCKNUT (M8X1.25-THD)  
32. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
33. 148-9263 [1] GROMMET-SPLIT  
34. 9G-9150 [1] CLIP  
35. 8R-0768 [3] ROD-RETAINING  
36. 5P-4116 [3] WASHER-HARD (8.8X20.5X2-MM THK)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29040259
 

117-8250: AXLE AR-FIXED

117-8250 AXLE AR-FIXED
S/N 7SR1-2267
AN ATTACHMENT
i00933527 SEBP2904
  For full view, you need register

Parts for your 928G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  117-1615 Y [2] BRAKE & PLANETARY GP  
  151-6142 CY [1] DIFFERENTIAL GP (STANDARD)  
    S/N 7SR592-2267
  8R-2657 Y [1] DIFFERENTIAL GP (STANDARD)  
    S/N 7SR1-591
  9U-3738 Y [1] GEAR GP-BEVEL  
  117-8255 Y [1] HOUSING GP-FIXED AXLE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3114, 3116, and 3126 Engines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 928G :

WIRING GP-PLATFORM
122-6492 WIRING GP-PLATFORM
WIRING GP-PLATFORM
122-6492 WIRING GP-PLATFORM
WIRING GP-PLATFORM
122-6492 WIRING GP-PLATFORM
WIRING GP-PLATFORM
113-3643 WIRING GP-PLATFORM
WIRING GP-OPEN ROPS
171-6171 WIRING GP-OPEN ROPS
WIRING GP-OPEN ROPS
113-3642 WIRING GP-OPEN ROPS
WIRING GP-FRONT
123-7333 WIRING GP-FRONT
WIRING GP-FAN
195-7598 WIRING GP-FAN
WIRING GP-PLATFORM
122-6497 WIRING GP-PLATFORM
WIRING GP-PLATFORM
171-6176 WIRING GP-PLATFORM
WIRING GP-POWER TRAIN
113-3650 WIRING GP-POWER TRAIN
WIRING GP-POWER TRAIN
113-3650 WIRING GP-POWER TRAIN
WIRING GP-POWER TRAIN
113-3650 WIRING GP-POWER TRAIN
WIRING GP-REAR
113-3651 WIRING GP-REAR
WIRING GP-RIDE CONTROL
132-1328 WIRING GP-RIDE CONTROL
WIRING GP-SECONDARY STEERING
113-3787 WIRING GP-SECONDARY STEERING

Truck sale:

Caterpillar 928G
 
Caterpillar 928G
- Wheel Loaders
N C MACHINERY CO.
Caterpillar 928G, Wheel Loaders, Construction
93,000 
Caterpillar 928G, Wheel Loaders, Construction
- Wheel Loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 928G, Wheel Loaders, Construction
39,000 
Caterpillar 928G, Wheel Loaders, Construction
- Wheel Loaders
RING POWER CORP.
Caterpillar 928G, Wheel Loaders, Construction
52,347 
Caterpillar 928G, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
Caterpillar 928G
 
Caterpillar 928G
- Wheel Loaders
FABICK CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.