WORK TOOLS
CHAIN GPDRIVE GP
FRAME AND BODY
FRAME GPWORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)WORK TOOLS
CHAIN GP
#SEBP29130020
208-2693: CHAIN GP-TRENCHER
208-2693 CHAIN GP-TRENCHER -48-IN, 8-IN CUT, ROCK
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your T9 TRENCHER:
CATERPILLAR SIS#SEBP29130021
208-2694: CHAIN GP-TRENCHER
208-2694 CHAIN GP-TRENCHER -48-IN, 8-IN CUT, HARD SOIL
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your T9 TRENCHER:
CATERPILLAR SIS#SEBP29130022
222-7742: CHAIN GP-TRENCHER
222-7742 CHAIN GP-TRENCHER -48-IN, 6-IN CUT, HARD SOIL
PART OF 222-8554, 222-8556 TRENCHER AR
PART OF 222-8554, 222-8556 TRENCHER AR
For full view, you need register
Parts for your T9 TRENCHER:
CATERPILLAR SIS#SEBP29130023
222-7743: CHAIN GP-TRENCHER
222-7743 CHAIN GP-TRENCHER -48-IN, 6-IN CUT, ROCK
PART OF 222-8559, 222-8561 TRENCHER AR
PART OF 222-8559, 222-8561 TRENCHER AR
For full view, you need register
Parts for your T9 TRENCHER:
CATERPILLAR SIS#SEBP29130024
222-7916: CHAIN GP-TRENCHER
222-7916 CHAIN GP-TRENCHER -48-IN, 8-IN CUT, STANDARD
PART OF 222-7909, 222-7910 TRENCHER AR
PART OF 222-7909, 222-7910 TRENCHER AR
For full view, you need register
Parts for your T9 TRENCHER:
CATERPILLAR SIS#SEBP29130025
179-6317: DRIVE GP-TRENCHER
179-6317 DRIVE GP-TRENCHER
PART OF 222-8616, 222-8618 TRENCHER AR
PART OF 222-8616, 222-8618 TRENCHER AR
For full view, you need register
Parts for your T9 TRENCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2P-8119 | [2] | CONE-BEARING | |
| 2. | 8B-7206 | [1] | LOCKNUT | |
| 3. | 8B-7207 | [1] | NUT | |
| 4. | 002-1212 | [2] | CUP-BEARING | |
| 5. | 166-0798 | [1] | HUB | |
| 6. | 166-0803 | [1] | AUGER | |
| 7. | 179-6323 | [1] | SPROCKET (15-TEETH)(15 TEETH) | |
| 8. | 179-6333 | [1] | SHAFT AS | |
| 9. | 188-8834 | [1] | COUPLING | |
| 10. | 189-0407 | [1] | KEY | |
| 11. | 192-7880 | [1] | HUB | |
| 12. | 192-7881 | [2] | PLATE | |
| 13. | 192-7882 | [1] | PLATE | |
| 14. | 3B-8489 | [1] | FITTING-GREASE | |
| 15. | 8T-0707 | [1] | RING-RETAINING (INTERNAL) | |
| 16. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 18. | 8T-4176 M | [1] | BOLT (M12X1.75X90-MM) | |
| 19. | 8T-4182 M | [6] | BOLT (M10X1.5X45-MM) | |
| 20. | 8T-4199 M | [4] | BOLT (M8X1.25X12-MM) | |
| 21. | 8T-4223 | [22] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 22. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 23. | 8T-4244 M | [11] | NUT (M12X1.75-THD) | |
| 24. | 8T-4648 M | [4] | BOLT (M12X1.75X70-MM) | |
| 25. | 8T-6868 M | [6] | BOLT (M12X1.75X80-MM) | |
| 26. | 194-1476 B | [1] | SPACER (7.5MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP29130026
179-6320: IDLER GP-CHAIN
179-6320 IDLER GP-CHAIN
PART OF 222-8616, 222-8618 TRENCHER AR
PART OF 222-8616, 222-8618 TRENCHER AR
For full view, you need register
Parts for your T9 TRENCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-3867 | [2] | BALL BEARING | |
| 2. | 027-1287 | [1] | FITTING-GREASE | |
| 3. | 110-0848 M | [1] | NUT (M30X1.5-THD) | |
| 4. | 166-0792 B | [2] | SPACER (BEARING)(10.41MM THK) | |
| 5. | 166-0793 | [2] | SEAL | |
| 6. | 166-0794 | [1] | PIN AS | |
| 7. | 179-6328 | [1] | IDLER | |
| 8. | 9S-4190 | [1] | PLUG-O RING | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP29130027
166-0821: TOOTH GP-TRENCHER
166-0821 TOOTH GP-TRENCHER -6-IN STANDARD , 48-IN CHAIN
PART OF 189-5956 CHAIN GP-TRENCHER
PART OF 189-5956 CHAIN GP-TRENCHER
For full view, you need register
Parts for your T9 TRENCHER:
CATERPILLAR SIS#SEBP29130028
194-4681: TOOTH GP-TRENCHER
194-4681 TOOTH GP-TRENCHER -8-IN STANDARD, 48-IN CHAIN
PART OF 222-7916 CHAIN GP-TRENCHER
ALSO AN ATTACHMENT
PART OF 222-7916 CHAIN GP-TRENCHER
ALSO AN ATTACHMENT
For full view, you need register
Parts for your T9 TRENCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 166-0825 | [25] | TOOTH (LH) | |
| 2. | 166-0826 | [25] | TOOTH (RH) | |
| 3. | 193-5723 | [7] | BRACKET (8-IN CUT) | |
| 4. | 193-5726 | [14] | BRACKET (6.5-IN CUT) | |
| 5. | 6V-7687 M | [100] | LOCKNUT (M12X1.75-THD) | |
| 6. | 8T-4192 M | [44] | BOLT (M12X1.75X25-MM) | |
| 7. | 8T-4910 M | [28] | BOLT (M12X1.75X60-MM) | |
| 8. | 8T-4956 M | [28] | BOLT (M12X1.75X35-MM) | |
| M | METRIC PART | |||
#SEBP29130029
194-4682: TOOTH GP-TRENCHER
194-4682 TOOTH GP-TRENCHER -10-IN STANDARD, 48-IN CHAIN
PART OF 208-2678 CHAIN GP-TRENCHER
AN ATTACHMENT
PART OF 208-2678 CHAIN GP-TRENCHER
AN ATTACHMENT
For full view, you need register
Parts for your T9 TRENCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 166-0825 | [27] | TOOTH (LH) | |
| 2. | 166-0826 | [27] | TOOTH (RH) | |
| 3. | 193-5723 | [6] | BRACKET (8-IN CUT) | |
| 4. | 193-5724 | [6] | BRACKET (10-IN CUT) | |
| 5. | 193-5726 | [12] | BRACKET (6.5-IN CUT) | |
| 6. | 6V-7687 M | [108] | LOCKNUT (M12X1.75-THD) | |
| 7. | 8T-4192 M | [36] | BOLT (M12X1.75X25-MM) | |
| 8. | 8T-4910 M | [24] | BOLT (M12X1.75X60-MM) | |
| 9. | 8T-4956 M | [24] | BOLT (M12X1.75X35-MM) | |
| 10. | 8T-6868 M | [24] | BOLT (M12X1.75X80-MM) | |
| M | METRIC PART | |||
Information:
WORK TOOLS
CHAIN GP
Operation and Maintenance Manual
Technical Information Bulletin
STANDARD NUT WILL NOT HOLD THE RECOMMENDED TORQUE FOR TRENCHER TEETH
STANDARD NUT WILL NOT HOLD THE RECOMMENDED TORQUE FOR TRENCHER TEETH
STANDARD NUT WILL NOT HOLD THE RECOMMENDED TORQUE FOR TRENCHER TEETH
Disassembly and Assembly
Service Magazine
