171-7623 LINK AS-TRACK PART OF 171-7625, 172-8210 TRACK GP AN ATTACHMENT 307B MINI HYD EXCAVATOR



UNDERCARRIAGE
TRACK GP
ROLLER GP
SLACK ADJUSTER GP
TRACK ADJUSTER & RECOIL GP
TRACK GP

MINI HYD EXCAVATOR 307B MINI HYD EXCAVATOR AFB
 307B Excavator AFB00001-UP (MACHINE) POWERED BY 4M40 Engine SEBP2925 307B AFB   (1999)

UNDERCARRIAGE

TRACK GP
LINK AS-TRACK
168-6753 LINK AS-TRACK
LINK AS-TRACK
171-7623 LINK AS-TRACK
LINK AS-TRACK
172-3290 LINK AS-TRACK
TRACK AR-RUBBER
134-7668 TRACK AR-RUBBER
TRACK GP
168-6751 TRACK GP
TRACK GP
171-7625 TRACK GP
TRACK GP
172-3287 TRACK GP
TRACK GP
172-8207 TRACK GP
TRACK GP
172-8208 TRACK GP
TRACK GP
172-8210 TRACK GP
 

#SEBP29250150
 

171-7623: LINK AS-TRACK

171-7623 LINK AS-TRACK
PART OF 171-7625, 172-8210 TRACK GP
AN ATTACHMENT
i01084260 SEBP2925
1717623 LINK AS-TRACK Parts scheme
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 3A-9615 [41] LINK-RH  
2. 096-7033 [1] COTTER  
3. 3A-9617 [1] LINK-MASTER-RH  
4. 117-8881 [1] BUSHING-TRACK  
5. 3A-9616 [1] LINK-MASTER-LH  
6. 117-8883 [1] PIN-TRACK MASTER  
7. 117-8884 [2] SPACER  
8. 3A-9614 [41] LINK-LH  
9. 117-8882 [41] PIN  
10. 171-7624 [41] BUSHING  
11. 145-2953 [164] WASHER  
 

#SEBP29250151
 

172-3290: LINK AS-TRACK

172-3290 LINK AS-TRACK
PART OF 172-3287, 172-8207, 172-8208 TRACK GP
ALSO AN ATTACHMENT
i01084265 SEBP2925
1723290 LINK AS-TRACK Parts scheme
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 3A-9614 [41] LINK-LH  
2. 3A-9615 [41] LINK-RH  
3. 3A-9616 [1] LINK-MASTER-LH  
4. 3A-9617 [1] LINK-MASTER-RH  
5. 117-8881 [1] BUSHING-TRACK  
6. 117-8882 [41] PIN  
7. 117-8883 [1] PIN-TRACK MASTER  
8. 171-6766 [2] SEAL-TRACK  
9. 171-6767 [82] SEAL-TRACK  
10. 172-3288 [41] BUSHING  
11. 096-7033 [1] COTTER  
 

#SEBP29250152
 

6I-6522: ROLLER AR-TRACK & CARRIER

6I-6522 ROLLER AR-TRACK & CARRIER
PART OF 165-8998 FRAME AR-UNDERCARRIAGE
i00565521 SEBP2925
6I6522 ROLLER AR-TRACK & CARRIER Parts scheme
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 095-1277 M [2] SETSCREW-SOCKET  
2. 102-8076 Y [2] ROLLER GP-TRACK CARRIER  
3. 127-3806 Y [12] ROLLER GP-TRACK-SINGLE FLANGE  
4. 8T-4648 M [48] BOLT (M12X1.75X70-MM)  
5. 8T-4223 [48] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29250153
 

102-8076: ROLLER GP-TRACK CARRIER

102-8076 ROLLER GP-TRACK CARRIER
PART OF 6I-6522 ROLLER AR-TRACK & CARRIER
i00466926 SEBP2925
1028076 ROLLER GP-TRACK CARRIER Parts scheme
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 6I-6575 [1] SHAFT AS-TRACK ROLLER  
2. 099-6463 [1] SEAL GP  
3. 7H-3171 [1] PLUG-PIPE  
4. 099-6462 [1] RETAINER  
5. 095-1541 [1] SEAL-O-RING  
6. 6V-8202 M [5] BOLT-SOCKET HEAD (M8X1.25X16-MM)  
7. 102-8079 [1] COVER  
8. 6I-6571 [2] ROLLER & BEARING AS  
9. 099-6461 [2] BEARING-CARRIER ROLLER  
  M   METRIC PART
 

#SEBP29250154
 

127-3807: ROLLER GP-TRACK-CENTER FLANGE

127-3807 ROLLER GP-TRACK-CENTER FLANGE
PART OF 134-7668 TRACK AR-RUBBER
AN ATTACHMENT
i00597672 SEBP2925
1273807 ROLLER GP-TRACK-CENTER FLANGE Parts scheme
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 127-3804 [1] COLLAR-TRACK ROLLER  
2. 102-8115 [1] SHAFT-TRACK ROLLER  
3. 6I-6528 [1] ROLLER & BEARING AS  
4. 5I-6274 [2] BEARING-IDLER  
5. 136-0296 [2] SEAL GP  
  136-0297 [2] RING  
6. 095-1659 [2] SEAL-O-RING  
7. 127-3805 [1] COLLAR-TRACK ROLLER  
8. 102-8116 [2] DOWEL  
9. 3D-4603 [1] PLUG-PIPE  
 

#SEBP29250155
 

127-3806: ROLLER GP-TRACK-SINGLE FLANGE

127-3806 ROLLER GP-TRACK-SINGLE FLANGE
PART OF 6I-6522 ROLLER AR-TRACK & CARRIER
i00599316 SEBP2925
1273806 ROLLER GP-TRACK-SINGLE FLANGE Parts scheme
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 424-4194 [1] COLLAR-TRACK ROLLER  
2. 6I-6525 [1] ROLLER & BEARING AS  
2A. 5I-6274 [2] BEARING-IDLER  
3. 136-0296 [2] SEAL GP  
    (EACH INCLUDES)
  136-0297 [2] RING  
4. 095-1659 [2] SEAL-O-RING  
5. 102-8115 [1] SHAFT-TRACK ROLLER  
6. 424-4197 [1] COLLAR-TRACK ROLLER  
7. 102-8116 [2] DOWEL  
8. 3D-4603 [1] PLUG-PIPE  
 

#SEBP29250156
 

118-6744: SLACK ADJUSTER GP

118-6744 SLACK ADJUSTER GP
PART OF 6I-6486, 7I-7768 IDLER GP-FRONT
ALSO AN ATTACHMENT
i00486249 SEBP2925
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

Pos. Part No Qty Parts name Comments
  6I-6578 Y [2] ADJUSTMENT GP-HYDRAULIC TRACK  
  8T-4183 M [4] BOLT (M12X1.75X40-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29250157
 

102-8091: SPRING GP-RECOIL

102-8091 SPRING GP-RECOIL
PART OF 118-7180 IDLER GP-FRONT
i00466929 SEBP2925
1028091 SPRING GP-RECOIL Parts scheme
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 102-8092 [1] SUPPORT AS  
2. 5I-4533 [1] SPRING  
3. 8T-4167 [1] WASHER (4.0MM THK)  
4. 8T-4001 M [1] NUT (M24X3.00 THD)  
5. 5I-9277 [1] SUPPORT  
6. 8T-4199 M [1] BOLT (M8X1.25X12MM)  
7. 102-8093 [1] PLATE  
8. 102-8113 [1] ROD  
  M   METRIC PART
 

#SEBP29250158
 

102-8141: SPRING GP-RECOIL

102-8141 SPRING GP-RECOIL
PART OF 118-7179 IDLER GP-FRONT
AN ATTACHMENT
i00466995 SEBP2925
1028141 SPRING GP-RECOIL Parts scheme
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 102-8092 [1] SUPPORT AS  
2. 5I-4533 [1] SPRING  
3. 102-8113 [1] ROD  
4. 8T-4167 [1] WASHER (4.0MM THK)  
5. 8T-4001 M [1] NUT (M24X3.00 THD)  
6. 5I-9277 [1] SUPPORT  
7. 102-8093 [1] PLATE  
8. 8T-4199 M [1] BOLT (M8X1.25X12MM)  
9. 5I-9280 [1] SPACER  
  M   METRIC PART
 

#SEBP29250159
 

134-7668: TRACK AR-RUBBER

134-7668 TRACK AR-RUBBER
FOR USE WITH UNDERCARRIAGE WITH BLADE MOUNTING
AN ATTACHMENT
i00676946 SEBP2925
1347668 TRACK AR-RUBBER Parts scheme
  For full view, you need register

Parts for your 307B MINI HYD EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 7I-7768 Y [1] IDLER GP-FRONT  
2. 218-7097 [1] FRAME AS-UNDERCARRIAGE  
  102-8071 [2] BRACKET  
3. 134-7697 [2] TRACK  
4. 127-3807 Y [4] ROLLER GP-TRACK-CENTER FLANGE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Track Adjustment - Adjust
307B Excavator
Track (Rubber) - Check/Adjust
307B Excavator
Track Information
307B Excavator
Special Instruction
Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}
Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}
Technical Information Bulletin
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
Undercarriage Reconditioning Bulletin
Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175}
Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175}
Track Data Charts {0372, 0374, 4170}
Track Data Charts {0372, 0374, 4170}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Procedure for Servicing Master Joints for (320 through 336) Hydraulic Excavators. {4169, 4171}
Procedure for Servicing Master Joints for (320 through 336) Hydraulic Excavators. {4169, 4171}
Reuse And Salvage Guidelines
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Service Magazine
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
The placement of a Bar Code Sticker on Track Shoes After Heat Treatment is Now Utilized to Verify Heat Treatment. {4172}
2006/12/18
Improved Control of the Heat Treat Process Prevents Track Shoes from Cracking {4170}
2007/02/19
Track Shoe Ice Lug Requirements {4170}
Track Shoe Ice Lug Requirements {4170}

Caterpillar Parts SIS Catalog 307B :

LINK AS-TRACK
168-6753 LINK AS-TRACK
IDLER GP-FRONT
118-7180 IDLER GP-FRONT
IDLER GP-FRONT
118-7179 IDLER GP-FRONT
IDLER GP-FRONT
7I-7768 IDLER GP-FRONT
IDLER GP-FRONT
6I-6488 IDLER GP-FRONT
IDLER GP-FRONT
6I-6486 IDLER GP-FRONT
GUARD GP-TRAVEL MOTOR
102-3129 GUARD GP-TRAVEL MOTOR
GUARD GP-TRACK GUIDE
121-8250 GUARD GP-TRACK GUIDE
LINK AS-TRACK
172-3290 LINK AS-TRACK
ROLLER AR-TRACK & CARRIER
6I-6522 ROLLER AR-TRACK & CARRIER
ROLLER GP-TRACK CARRIER
102-8076 ROLLER GP-TRACK CARRIER
ROLLER GP-TRACK-CENTER FLANGE
127-3807 ROLLER GP-TRACK-CENTER FLANGE
ROLLER GP-TRACK-SINGLE FLANGE
127-3806 ROLLER GP-TRACK-SINGLE FLANGE
118-6744 SLACK ADJUSTER GP
SPRING GP-RECOIL
102-8091 SPRING GP-RECOIL
SPRING GP-RECOIL
102-8141 SPRING GP-RECOIL

Truck sale:

Caterpillar 307B, Construction
22,000 USD 
Caterpillar 307B, Construction
- Crawler Excavators
ZIEGLER CAT
CATERPILLAR 307B 2000
 
CATERPILLAR 307B 2000
- TRACK EXCAVATORS
ZIEGLER INC
United States
 
 
CATERPILLAR 307B 2000
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
CATERPILLAR 307B 2000
$23,197 USD 
CATERPILLAR 307B 2000
- TRACK EXCAVATORS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
2000 CAT 307B
USD $23,957 
2000 CAT 307B

Finning Canada
Edmonton, Alberta, Canada T5P4C3