AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4P-1365 DRIVE GP-GOVERNOR & FUEL PUMP S/N 4JK99-99999 3406B GEN SET ENGINE


FUEL SYSTEM
GOVERNOR GP
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
GOVERNOR GP

GEN SET ENGINE 3406B GEN SET ENGINE 4JK
 3406C Generator Set 4JK00099-UP SEBP2933 3406B 4JK   (1991)

FUEL SYSTEM

GOVERNOR GP
ACTUATOR AS-GOVERNOR
111-4421 ACTUATOR AS-GOVERNOR
DRIVE GP-GOVERNOR & FUEL PUMP
110-1282 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
4P-1365 DRIVE GP-GOVERNOR & FUEL PUMP
GOVERNOR GP
116-2832 GOVERNOR GP
GOVERNOR GP
2W-8576 GOVERNOR GP
GOVERNOR GP
7C-4797 GOVERNOR GP
 

#SEBP29330140
 

4P-1365: DRIVE GP-GOVERNOR & FUEL PUMP

4P-1365 DRIVE GP-GOVERNOR & FUEL PUMP
S/N 4JK99-99999
i00373348 SEBP2933
4P1365 DRIVE GP-GOVERNOR & FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6H-3958 [4] BOLT-SOCKET HEAD (1/4-20X2.5-IN)  
2. 9X-7715 [1] SEAL-QUAD RING  
3. 1W-5438 [1] SPOOL  
4. 4W-0435 [1] SEAL-QUAD RING  
5. 4W-4617 [1] PLUG  
6. 4P-1369 [1] BODY-VALVE  
7. 4P-1368 [1] CARRIER-DRIVE  
8. 7W-3218 [1] RING-GUIDE  
9. 5H-0793 [1] RING-LOCK  
10. 6V-7543 [4] BOLT-12 POINT HEAD (3/8-16X3.25-IN)  
11. 009-3101 [1] RING-RETAINING  
12. 8T-7893 [4] BOLT (1/4-20X0.87-IN)  
13. 1W-5427 [1] SPRING  
14. 3K-3467 [1] NUT (7/8-20-THD)  
15. 7W-7663 [1] SCREW-ADJUSTMENT  
16. 3E-4301 [1] SETSCREW-SOCKET  
17. 8L-5832 [1] NUT-HEX (10-32-THD)  
18. 4P-1358 [1] SPRING  
19. 7N-7264 [4] WEIGHT-GOVERNOR  
20. 1S-5440 [4] DOWEL  
21. 1W-5434 [1] CARRIER-WEIGHT  
22. 1W-5441 [1] RETAINER AS-SPRING  
23. 5P-3383 [4] NUT-WELD  
24. 1W-5431 [1] RING-DRIVE  
25. 7W-0993 [1] GEAR-PUMP DRIVE (64-TEETH)  
26. 4N-2927 [1] RACE-THRUST BEARING  
27. 4W-4616 [1] SEAL-QUAD RING  
 

#SEBP29330141
 

1W-7376: FASTENER GP-FUEL INJ PUMP

1W-7376 FASTENER GP-FUEL INJ PUMP -ENGINE
S/N 4JK99-99999
i00121991 SEBP2933
1W7376 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
2. 5P-0076 [1] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
3. 034-4288 [2] BOLT-12 POINT HEAD (3/8-16X1.125-IN)  
4. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
5. 6V-3319 [1] SEAL-O-RING  
6. 5P-5846 [1] SEAL-O-RING  
7. 2N-3350 [1] SEAL-O-RING  
8. 1C-2251 [1] BOLT (3/8-16X1.87-IN)  
 

#SEBP29330142
 

9Y-1234: FASTENER GP-FUEL INJ PUMP

9Y-1234 FASTENER GP-FUEL INJ PUMP -GOVERNOR
S/N 4JK99-99999
PART OF 2W-9103 PUMP GP-GOV & FUEL INJ
i00169901 SEBP2933
9Y1234 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7040 [2] BOLT (1/4-20X1-IN)  
2. 8S-4710 [4] BOLT (1/4-20X4-IN)  
3. 7B-2742 [2] BOLT (1/4-20X1.25-IN)  
4. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
5. 7X-0869 [1] BOLT-LOCKING (1/4-20X2-IN)  
6. 6V-5894 [2] BOLT (1/4-20X3.75-IN)  
7. 4F-7957 [2] BOLT (1/4-20X0.875-IN)  
8. 1B-2716 [2] BOLT (1/4-20X5-IN)  
 

#SEBP29330143
 

9Y-4913: FASTENER GP-FUEL INJ PUMP

9Y-4913 FASTENER GP-FUEL INJ PUMP -GOVERNOR
S/N 4JK218-99999
PART OF 130-5186, 131-3533, 135-0737 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
i00122914 SEBP2933
9Y4913 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5894 [4] BOLT (1/4-20X3.75-IN)  
2. 7B-2742 [2] BOLT (1/4-20X1.25-IN)  
3. 8S-4710 [4] BOLT (1/4-20X4-IN)  
4. 1B-2716 [2] BOLT (1/4-20X5-IN)  
5. 4F-7957 [2] BOLT (1/4-20X0.875-IN)  
6. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
7. 7X-0869 [1] BOLT-LOCKING (1/4-20X2-IN)  
8. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
 

#SEBP29330144
 

155-0681: FILTER GP-FUEL

155-0681 FILTER GP-FUEL
S/N 4JK409-99999
ALSO AN ATTACHMENT
i00907025 SEBP2933
1550681 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-5671 Y [1] FILTER GP-WATER SEP & FUEL  
2. 1A-2029 [4] BOLT (3/8-16X1.125-IN)  
3. 9X-6458 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
4. 2T-0961 I [1] HOSE AS  
5. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 155-5665 [1] PLATE  
7. 3F-1783 [1] ELBOW-REDUCING  
8. 8L-8413 [3] STRAP-CABLE (WHITE)  
9. 4V-4375 I [1] HOSE AS  
10. 005-4362 [2] ELBOW  
11. 9S-4185 [2] PLUG (3/4-16-THD)  
12. 8L-2786 [4] SEAL-O-RING  
14. 7D-5363 [2] CONNECTOR (9/16-18-THD)  
15. 5N-2368 I [1] HOSE AS  
16. 8B-2664 [1] BUSHING-REDUCER  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP29330145
 

4N-1981: FILTER GP-FUEL

4N-1981 FILTER GP-FUEL -ENGINE
S/N 4JK99-99999
i00107917 SEBP2933
4N1981 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3789 C [1] BASE AS-FILTER (FUEL)  
2. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
3. 1R-0749 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP29330146
 

8H-7204: FILTER GP-FUEL

8H-7204 FILTER GP-FUEL
S/N 4JK99-99999
PRIMARY
i00108873 SEBP2933
8H7204 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3583 C [1] BASE-FUEL FILTER  
2. 7N-1628 C [1] NUT (3/8-24-THD)  
3. 2J-0157 C [1] SEAL-O-RING  
4. 1L-3769 [1] RING-RETAINING  
5. 7H-9678 [1] RETAINER-ELEMENT  
6. 2H-3429 [1] RING-RETAINING  
7. 7S-9323 [1] SPRING  
8. 8H-7202 [1] CASE AS-FUEL FILTER  
9. 9M-2342 [1] FILTER ELEMENT-FUEL (PRIMARY)  
10. 8H-2778 [1] SEAL-RING (FUEL FILTER BASE)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP29330147
 

133-5671: FILTER GP-WATER SEP & FUEL

133-5671 FILTER GP-WATER SEP & FUEL
S/N 4JK409-99999
PART OF 155-0681 FILTER GP-FUEL
ALSO AN ATTACHMENT
i00503128 SEBP2933
1335671 FILTER GP-WATER SEP & FUEL Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 137-4367 [1] BASE AS  
2. 513-4490 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)  
3. 129-0375 [1] BOWL AS-WATER COLLECTION (FUEL FILTER, WATER SEPARATOR)  
    -OR-
  155-2629 A [1] BOWL AS-WATER COLLECTION (12-VOLT HEATER)  
    -OR-
  157-1206 A [1] BOWL AS-WATER COLLECTION (24-VOLT HEATER)  
   
  141-0284 [1] KIT-SEAL  
    (INCLUDES SEAL & GASKET)
  A   NOT PART OF THIS GROUP
 

#SEBP29330148
 

116-2832: GOVERNOR GP

116-2832 GOVERNOR GP
S/N 4JK816-99999
PART OF 131-3533 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
i00481385 SEBP2933
1162832 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5735 [1] LEVER AS-PIVOT  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
  115-1249 [1] SETSCREW-SOCKET  
2. 2W-2216 [1] SPRING-LINK  
3. 1N-3800 [1] SLEEVE-RACK CONTROL  
4. 2M-7819 [3] RING-RETAINING  
5. 1N-3802 [1] SEAT-SPRING  
6. 8N-9678 [1] PISTON GP-GOVERNOR SERVO  
  5P-9757 [1] SEAL-O-RING  
  7C-0790 [1] CYLINDER AS  
  7W-0250 [1] SLEEVE  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
7. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
8. 7M-7219 [1] BEARING-THRUST  
9. 4N-2953 [1] RING-LOCK  
10. 133-8890 [2] RACE-NEEDLE BEARING  
11. 4W-6868 [1] RISER-GOVERNOR  
12. 8N-9680 [1] HOUSING AS-GOVERNOR  
  4F-6024 [2] PIN  
  8S-6814 [4] PIN  
13. 0S-1347 [2] BOLT (1/4-20X0.75-IN)  
14. 7N-7269 [1] ACTUATOR AS-GOVERNOR  
  4N-6408 [1] PISTON AS  
  4N-6404 [1] RING-RETAINING  
  4N-6406 [1] RING-SPACER  
15. 4N-0432 [1] BALL BEARING  
16. 6N-3504 [1] SEAT-GOVERNOR SPRING  
17. 7N-7270 [2] SLEEVE-SPRING  
18. 144-0478 [1] GASKET  
19. 7E-3986 [1] CARRIER-WEIGHT  
20. 119-8699 [4] WEIGHT-GOVERNOR  
21. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
22. 4N-9019 [1] DOWEL  
23. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
24. 1S-5440 [4] DOWEL  
25. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
26. 8L-5832 [2] NUT-HEX (10-32-THD)  
27. 1W-4243 [1] SPRING-BUMPER  
28. 8N-3256 [1] COLLAR-LOAD STOP  
29. 7W-5836 [1] BOLT AS-SPECIAL (STOP)  
30. 8N-3956 [1] BLOCK AS-STOP  
  8N-3303 [1] DOWEL  
31. 6D-3897 [1] BOLT (8-32X0.5-IN)  
32. 6L-5551 [2] BOLT-SOCKET HEAD (1/4-20X2.25-IN)  
33. 7N-8821 [2] RING-RETAINING  
34. 3K-5733 [1] SPRING  
35. 2W-6102 [1] LEVER-SPRING SEAT  
36. 2W-8638 [1] SPACER (18X25X1-MM THK)  
37. 2W-8645 [1] SHAFT  
38. 5H-2532 [1] KEY-WOODRUFF  
39. 1W-3961 [1] SPACER (6.75X14X13-MM THK)  
40. 2W-0801 [1] SHAFT  
41. 8S-7803 [1] RING-RETAINING  
42. 9Y-4701 [1] SETSCREW-SOCKET (10-32X1.38-IN)  
43. 2W-0800 [1] LEVER-SHUTOFF  
44. 4N-5621 [1] SHAFT-SHUTOFF  
45. 1W-3962 [1] SPACER (6.75X14X10-MM THK)  
46. 1J-9671 [1] SEAL-O-RING  
47. 9S-8003 [1] PLUG (1/2-20-THD)  
48. 030-9615 [4] SCREW-NYLOK  
49. 8N-3760 [1] COVER  
50. 8N-3761 [1] GASKET  
51. 4N-8445 [1] BOLT (1/4-20X1.25-IN)  
52. 1N-3935 [1] COVER  
53. 5B-3180 [1] NUT (5/16-18-THD)  
54. 144-0479 [1] GASKET-COVER (IDLE-SPEED ADJ)  
55. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
56. 1W-5342 [1] LEVER-SHUTOFF  
57. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
58. 9A-7377 [1] VALVE AS-NEEDLE (THROTTLE RESPONSE)  
58A. 4N-5485 [1] BODY-VALVE  
58B. 5F-9144 [1] SEAL-O-RING  
59. 4N-5484 [1] VALVE-NEEDLE (THROTTLE RESPONSE)  
59A. 6H-9691 [1] SEAL-O-RING  
62. 8N-3762 [1] COVER  
63. 3P-0009 [1] INSULATOR  
64. 7N-2594 [1] SETSCREW-SLOTTED  
65. 7W-4272 [1] NUT-SEALING (5/16-18-THD)  
66. 144-0480 [1] GASKET  
67. 6V-5029 [1] SEAL-LIP TYPE  
68. 1B-2713 [6] BOLT (1/4-20X1.75-IN)  
69. 7W-1749 [1] COVER AS  
  8S-6814 [2] PIN  
  138-9507 [1] SEAL-LIP TYPE  
70. 2B-2695 [1] BOLT (5/16-18X0.875-IN)  
71. 4K-9890 [1] WASHER (8.6X17.3X1.6-MM THK)  
72. 8N-3776 [1] GASKET-COVER (GOVERNOR DETENT)  
73. 7W-4247 [1] HOUSING GP-GOVERNOR  
  8N-3945 [1] BUSHING-TERMINAL  
74. 3D-8317 [1] RING-RETAINING  
75. 4J-7533 [1] SEAL-O-RING  
76. 4N-0260 [1] SEAL-LIP TYPE  
77. 9S-4180 [1] PLUG  
78. 8N-2499 [1] SPRING-GUIDE  
79. 8H-9204 [1] WASHER-FELT (19/32X7/8X5/16-IN THK)  
 

#SEBP29330149
 

2W-8576: GOVERNOR GP

2W-8576 GOVERNOR GP
S/N 4JK99-99999
PART OF 135-0737, 2W-9103 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
i00540131 SEBP2933
2W8576 GOVERNOR GP Parts scheme 2W8576 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5735 C [1] LEVER AS-PIVOT  
  8L-5832 [1] NUT-HEX (10-32-THD)  
  115-1249 [1] SETSCREW-SOCKET  
  4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
2. 2W-2216 [1] SPRING-LINK  
3. 1N-3800 [1] SLEEVE-RACK CONTROL  
4. 2M-7819 [3] RING-RETAINING  
5. 1N-3802 [1] SEAT-SPRING  
6. 8N-9678 [1] PISTON GP-GOVERNOR SERVO  
  7C-0790 [1] CYLINDER AS  
  1W-4098 [1] PISTON-GOVERNOR SERVO  
  7W-0250 [1] SLEEVE  
  5P-9757 [1] SEAL-O-RING  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
7. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
8. 7M-7219 [1] BEARING-THRUST  
9. 4N-2953 [1] RING-LOCK  
10. 133-8890 [2] RACE-NEEDLE BEARING  
11. 4W-6868 C [1] RISER-GOVERNOR  
12. 8N-9680 [1] HOUSING AS-GOVERNOR  
  4F-6024 [2] PIN  
  8S-6814 [4] PIN  
13. 8H-9204 [1] WASHER-FELT (19/32X7/8X5/16-IN THK)  
14. 7N-7269 [1] ACTUATOR AS-GOVERNOR  
  1N-3861 [1] SHIELD-GOVERNOR SPRING  
  7N-7268 [1] SEAT-SPRING  
  4N-6408 [1] PISTON AS  
  4N-6404 [1] RING-RETAINING  
  4N-6406 [1] RING-SPACER  
  4N-6407 [1] SPOOL-DASHPOT  
15. 4N-0432 [1] BALL BEARING  
16. 6N-3504 [1] SEAT-GOVERNOR SPRING  
17. 7N-7270 [2] SLEEVE-SPRING  
18. 9Y-4701 [1] SETSCREW-SOCKET (10-32X1.38-IN)  
19. 7E-3986 [1] CARRIER-WEIGHT  
20. 119-8699 [4] WEIGHT-GOVERNOR  
21. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
22. 4N-9019 [1] DOWEL  
23. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
24. 1S-5440 [4] DOWEL  
25. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
26. 8L-5832 [2] NUT-HEX (10-32-THD)  
27. 1W-4243 [1] SPRING-BUMPER  
28. 8N-3256 [1] COLLAR-LOAD STOP  
29. 7W-5836 C [1] BOLT AS-SPECIAL (STOP)  
  7W-5835 [1] COLLAR  
30. 8N-3956 [1] BLOCK AS-STOP  
  8N-3303 [1] DOWEL  
31. 6D-3897 [1] BOLT (8-32X0.5-IN)  
32. 6L-5551 [2] BOLT-SOCKET HEAD (1/4-20X2.25-IN)  
33. 7N-8821 [2] RING-RETAINING  
34. 3K-5733 [1] SPRING  
35. 2W-6102 [1] LEVER-SPRING SEAT  
36. 2W-8638 [1] SPACER (18X25X1-MM THK)  
37. 2W-8645 [1] SHAFT  
38. 5H-2532 [1] KEY-WOODRUFF  
39. 1W-3961 [1] SPACER (6.75X14X13-MM THK)  
40. 2W-0801 [1] SHAFT  
41. 8S-7803 [1] RING-RETAINING  
42. 2W-0799 [1] SPRING-SHUTOFF  
43. 2W-0800 [1] LEVER-SHUTOFF  
44. 4N-5621 [1] SHAFT-SHUTOFF  
45. 1W-3962 [1] SPACER (6.75X14X10-MM THK)  
46. 1J-9671 [1] SEAL-O-RING  
47. 9S-8003 [1] PLUG (1/2-20-THD)  
48. 8C-8564 [4] SCREW-LOCK  
49. 8N-3760 [1] COVER  
50. 8N-3761 [1] GASKET  
51. 4N-8445 [1] BOLT (1/4-20X1.25-IN)  
52. 1N-3935 [1] COVER  
53. 5B-3180 C [1] NUT (5/16-18-THD)  
54. 144-0479 [1] GASKET-COVER (IDLE-SPEED ADJ)  
55. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
56. 1W-5342 [1] LEVER-SHUTOFF  
57. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
58. 0S-1347 [2] BOLT (1/4-20X0.75-IN)  
59. 144-0478 [1] GASKET  
60. 9A-7377 [1] VALVE AS-NEEDLE  
  4N-5484 [1] VALVE-NEEDLE  
  5N-5485 [1] RISER-BUS  
  5F-9144 [1] SEAL-O-RING  
  6H-9691 [1] SEAL-O-RING  
61. 8N-3762 [1] COVER  
62. 7W-4247 [1] HOUSING GP-GOVERNOR  
  3D-8317 [1] RING-RETAINING  
  4N-0260 [1] SEAL-LIP TYPE  
  8J-8343 [1] SEAL-O-RING  
  8M-8515 [1] SEAL-O-RING  
  8N-2499 [1] SPRING-GUIDE  
63. 3P-0009 [1] INSULATOR  
64. 371-6684 [1] SETSCREW (5/16-18X2-IN)  
65. 7W-4272 C [1] NUT-SEALING (5/16-18-THD)  
66. 144-0480 [1] GASKET  
67. 6V-5029 [1] SEAL-LIP TYPE  
68. 1B-2713 [6] BOLT (1/4-20X1.75-IN)  
69. 7W-1749 C [1] COVER AS  
  8S-6814 [2] PIN  
  138-9507 [1] SEAL-LIP TYPE  
70. 2B-2695 [1] BOLT (5/16-18X0.875-IN)  
71. 4K-9890 [1] WASHER (8.6X17.3X1.6-MM THK)  
72. 8N-3776 [1] GASKET-COVER (GOVERNOR DETENT)  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly
1992/09/01
Improved Fuel Pump Bonnet Seals Have Better Heat Resistance {1251}
1994/09/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/03/01
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Troubleshooting Tips Will Help Maintain Steady Engine RPM{1264, 1280}
Troubleshooting Tips Will Help Maintain Steady Engine RPM{1264, 1280}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Governor Linkage (Woodward PSG) (3406B)
3406 & 3406B GENERATOR SET ENGINE
Governor (New Scroll Fuel System) (3406B)
3406 & 3406B GENERATOR SET ENGINE
Governor and Fuel Pump Drive Group (3406B)
3406 & 3406B GENERATOR SET ENGINE
Governor Dashpot (3% Regulation) (3406)
3406 & 3406B GENERATOR SET ENGINE
Governor Linkage (Woodward PSG) (3406)
3406 & 3406B GENERATOR SET ENGINE
Governor and Fuel Pump Drive Gear (3406)
3406 & 3406B GENERATOR SET ENGINE
Fuel Transfer Pump And Tachometer Drive (3406)
3406 & 3406B GENERATOR SET ENGINE
Woodward PSG Governor
3406 & 3406B GENERATOR SET ENGINE
Governor Controls
3400 GENERATOR SET ENGINE ATTACHMENTS
Governor Linkage - 3406<BR> (Woodward EG-3P)
3400 GENERATOR SET ENGINE ATTACHMENTS
Governor Linkage-3406B<BR> (Woodward EG-3P Actuator)
3400 GENERATOR SET ENGINE ATTACHMENTS
Governor Linkage - 3408 &amp; 3412<BR> (Woodward EG-3P)
3400 GENERATOR SET ENGINE ATTACHMENTS
Disassembly and Assembly
Fuel Transfer Pump
3406B DIESEL ENGINE FOR GENERATOR SETS
Fuel Injection Pump Housing And Governor
3406B DIESEL ENGINE FOR GENERATOR SETS
Governor
3406B DIESEL ENGINE FOR GENERATOR SETS
Fuel Injection Pumps
3406B DIESEL ENGINE FOR GENERATOR SETS
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
Fuel Injection Pump Improvements{1251}
1994/02/07

Caterpillar Parts SIS Catalog 3406B :

DRIVE GP-GOVERNOR & FUEL PUMP
110-1282 DRIVE GP-GOVERNOR & FUEL PUMP
COVER GP-FUEL TRANSFER
4W-1727 COVER GP-FUEL TRANSFER
CONTROL GP-GOVERNOR
4N-3829 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
1W-7411 CONTROL GP-GOVERNOR
CONTROL GP-FUEL RATIO
128-4110 CONTROL GP-FUEL RATIO
7E-8396 CONTROL GP-FUEL
CONTROL AS-GOVERNOR
131-5455 CONTROL AS-GOVERNOR
ACTUATOR AS-GOVERNOR
111-4421 ACTUATOR AS-GOVERNOR
FASTENER GP-FUEL INJ PUMP
1W-7376 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
9Y-1234 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
9Y-4913 FASTENER GP-FUEL INJ PUMP
FILTER GP-FUEL
155-0681 FILTER GP-FUEL
FILTER GP-FUEL
4N-1981 FILTER GP-FUEL
FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
FILTER GP-WATER SEP & FUEL
133-5671 FILTER GP-WATER SEP & FUEL
GOVERNOR GP
116-2832 GOVERNOR GP

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.