AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

164-3270 LINES GP-PUMP S/N AFG530-UP CLUTCH BRAKE PART OF 163-5425 HYDRAULIC AR D7R II TRACK-TYPE TRACTOR


HYDRAULIC SYSTEM
LINES GP-PUMP
LINES GP-RIPPER
LINES GP-CYLINDER
LINES GP-WINCH
MANIFOLD GP

TRACK-TYPE TRACTOR D7R II TRACK-TYPE TRACTOR AFG
 D7R Track-Type Tractor AFG00001-UP (MACHINE) POWERED BY 3176C Engine SEBP2948 D7R II AFG   (2001)

HYDRAULIC SYSTEM

LINES GP-PUMP
LINES GP-PUMP
164-3270 LINES GP-PUMP
LINES GP-PUMP
164-3270 LINES GP-PUMP
 

#SEBP29480480
 

164-3270: LINES GP-PUMP

164-3270 LINES GP-PUMP
S/N AFG530-UP
CLUTCH BRAKE
PART OF 163-5425 HYDRAULIC AR
i02182759 SEBP2948
1643270 LINES GP-PUMP Parts scheme 1643270 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-5439 [1] VALVE-BREAKER RELIEF (HYDRAULIC TANK)  
2. 3W-3808 [1] PLATE AS  
3. 6V-0852 [1] CAP-DUST  
4. 7T-9538 [1] MANIFOLD  
5. 5P-1295 E HOSE (21-CM)  
6. 8J-9990 [1] PLUG-ORIFICE  
7. 144-0367 [4] CLAMP-HOSE  
8. 124-7000 [1] PLATE AS  
9. 126-0814 [2] FITTING AS (SWIVEL)  
    (EACH INCLUDES)
  6V-0852 [1] CAP-DUST (HYDRAULIC RETURN)  
10. 150-3058 [1] TEE AS  
  8C-8431 [1] TEE  
  3J-1907 [1] SEAL-O-RING  
11. 165-8331 I [1] HOSE AS  
12. 165-8332 I [1] HOSE AS  
13. 165-8339 [1] BRACKET AS  
14. 166-3513 I [1] HOSE AS  
15. 166-3514 I [1] HOSE AS  
16. 166-7688 I [1] HOSE AS  
17. 166-8782 [1] TUBE AS  
18. 173-3333 I [1] HOSE AS  
19. 175-3164 [1] SPACER  
20. 175-3514 [1] SPACER  
21. 180-9278 [1] BRACKET AS  
22. 193-7703 [1] TUBE AS  
23. 204-7385 I [1] HOSE AS  
24. 204-7386 I [1] HOSE AS  
25. 245-4331 I [1] HOSE AS  
26. 148-8326 [1] CONNECTOR AS  
  6V-9872 [1] CONNECTOR  
  3J-7354 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
27. 148-8339 [1] CONNECTOR AS  
  6V-8716 [1] CONNECTOR (STRAIGHT)  
  6V-9746 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
28. 148-8353 [1] ELBOW AS  
  6V-9001 [1] ELBOW  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
29. 148-8365 [1] ELBOW AS  
  8T-6876 [1] ELBOW  
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
30. 148-8377 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8980 [1] ELBOW  
  6V-8397 [2] SEAL-O-RING  
31. 148-8378 [1] ELBOW AS  
  6V-8724 [1] ELBOW  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
32. 148-8388 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8629 [1] ELBOW  
  2M-9780 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
33. 148-8407 [1] PLUG AS  
  9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
34. 148-8417 [1] REDUCER AS  
  6V-8941 [1] REDUCER  
  6V-8397 [1] SEAL-O-RING  
35. 150-4043 [1] CONNECTOR AS  
  6V-9873 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
36. 150-4047 [2] ADAPTER AS  
    (EACH INCLUDES)
  8T-2353 [1] ADAPTER  
  3J-7354 [1] SEAL-O-RING  
37. 1P-3704 [1] SEAL-RECTANGULAR  
38. 1P-3705 [1] SEAL-RECTANGULAR  
39. 1P-4577 [2] FLANGE-HALF  
40. 1P-4578 [2] FLANGE-HALF  
41. 1P-4584 [4] FLANGE-HALF  
42. 3D-2824 [1] SEAL-O-RING  
43. 3J-1907 [2] SEAL-O-RING  
44. 4J-0520 [3] SEAL-O-RING  
45. 4J-0522 [2] SEAL-O-RING  
46. 4L-6454 [9] BOLT (3/8-16X1-IN)  
47. 5F-3106 [1] SEAL-O-RING  
48. 5P-1075 [10] WASHER-HARD (10.2X22.5X3-MM THK)  
49. 5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
50. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
51. 5P-6863 [1] CLIP (TAB)  
52. 5P-6864 [1] CLIP (SLOT)  
53. 5P-7464 [1] CLIP (SLOT)  
54. 5P-7465 [1] CLIP (TAB)  
55. 5P-7468 [1] CLIP (SLOT)  
56. 5P-7469 [1] CLIP (TAB)  
57. 5P-7470 [1] CLIP (SLOT)  
58. 5P-7471 [1] CLIP (TAB)  
59. 5P-8444 [1] GROMMET (37-MM ID)  
60. 6J-2680 [3] SEAL-O-RING  
61. 6V-1249 [1] GROMMET (22-MM ID)  
62. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
63. 6V-8188 [1] NUT (1/2-13-THD)  
64. 6V-8556 [1] NUT (1-3/16-12-THD)  
65. 6V-8801 [1] NUT (3/8-16-THD)  
66. 6V-9168 [2] NUT (11/16-16-THD)  
67. 7X-0311 [4] BOLT (7/16-14X2.25-IN)  
68. 7X-0314 [4] BOLT (7/16-14X3-IN)  
69. 7X-0325 [2] BOLT (1/2-13X2.5-IN)  
70. 7X-0346 [3] BOLT (5/8-11X2-IN)  
71. 7X-2553 M [2] BOLT (M16X2X40-MM)  
72. 8S-0023 [1] CLIP (SLOT)  
73. 8S-0024 [1] CLIP (TAB)  
74. 8T-1887 C [1] CLIP (SLOT)  
75. 8T-1888 C [1] CLIP (TAB)  
76. 8T-1895 [4] CLIP (SLOT)  
77. 8T-1896 [4] CLIP (TAB)  
78. 8T-4122 [3] WASHER-HARD (17X32X3.5-MM THK)  
79. 8T-4223 [14] WASHER-HARD (13.5X25.5X3-MM THK)  
80. 8T-4835 [4] BOLT (1/2-13X2-IN)  
81. 8T-4896 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
82. 8T-5360 [8] WASHER (12X22.5X2.5-MM THK)  
83. 8T-8919 [5] BOLT (1/2-13X1.75-IN)  
84. 8T-9101 [4] BOLT (3/8-16X2.75-IN)  
85. 8T-9391 [2] BOLT (1/2-13X3.75-IN)  
86. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
87. 9P-2749 [1] CLIP (TAB)  
88. 9P-2750 [1] CLIP (SLOT)  
89. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
90. 9X-8268 [4] WASHER (17.5X30X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP29480481
 

164-3267: LINES GP-RIPPER

164-3267 LINES GP-RIPPER
S/N AFG1-UP
PART OF 166-2158 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i01082829 SEBP2948
1643267 LINES GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7G-5984 [2] CLIP (TAB)  
2. 7G-5985 [2] CLIP (SLOT)  
3. 133-8269 [1] MANIFOLD  
4. 167-1509 I [2] HOSE AS  
5. 167-1510 I [2] HOSE AS  
6. 167-7932 [1] PLATE AS  
  1F-0748 [6] NUT-WELD (1/2-13-THD)  
7. 1P-4577 [8] FLANGE-HALF  
8. 4J-0520 [16] SEAL-O-RING  
9. 5H-4019 [8] COVER  
10. 5S-7382 [16] BOLT (3/8-16X1.375-IN)  
11. 7G-5986 [2] GROMMET  
12. 8C-3206 [16] FLANGE-HALF  
13. 8T-4121 [32] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4196 M [32] BOLT (M10X1.5X35-MM)  
15. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 8T-4896 [20] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 8T-8917 [4] BOLT (1/2-13X1.25-IN)  
18. 8T-8919 [2] BOLT (1/2-13X1.75-IN)  
19. 9B-7237 [4] BOLT (3/8-16X1.25-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP29480482
 

135-8282: LINES GP-TILT CYLINDER

135-8282 LINES GP-TILT CYLINDER
S/N 5SP1-UP
PART OF 135-6583 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i00499610 SEBP2948
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1U-1325 [1] BLOCK  
  8T-8917 [7] BOLT (1/2-13X1.25-IN)  
  8T-9398 [4] BOLT (3/4-10X1.75-IN)  
  7X-0274 [4] BOLT (5/16-18X2.75-IN)  
  5C-6565 [2] BOLT (1/2-13X1.125-IN)  
  5M-3062 [2] BOLT (3/8-16X0.75-IN)  
  9B-7237 [8] BOLT (3/8-16X1.25-IN)  
  1L-4684 [4] CLAMP-HOSE  
  1P-4576 [4] FLANGE-HALF  
  136-6526 [1] GUARD  
  4T-6484 [1] GUARD  
  136-6525 [1] GUARD AS  
  136-6527 I [2] HOSE AS  
  6V-8801 [2] NUT (3/8-16-THD)  
  4T-6443 [1] PLATE  
  4J-5267 [4] SEAL-O-RING  
  4J-5140 [1] SEAL-O-RING  
  8T-4994 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
  8T-4223 [7] WASHER-HARD (13.5X25.5X3-MM THK)  
  8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP29480483
 

145-6914: LINES GP-TILT CYLINDER

145-6914 LINES GP-TILT CYLINDER -DUAL
S/N 5SP1-UP
PART OF 145-6915 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i00874271 SEBP2948
1456914 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-7468 [6] CLAMP  
2. 1U-1325 [2] BLOCK  
3. 4T-3981 [6] CLIP  
4. 4T-6443 [2] PLATE  
5. 4T-6484 [2] GUARD  
6. 8E-1866 [1] PLATE AS  
7. 8E-1867 [1] PLATE AS  
8. 8E-9422 [2] TUBE AS  
9. 8E-9423 [2] TUBE AS  
10. 8E-9433 [1] GUARD AS  
11. 8E-9438 [1] GUARD AS  
  8L-5771 [3] SPACER (2X3X0.88-IN THK)  
12. 9U-9267 [2] TUBE AS  
13. 9U-9268 [2] TUBE AS  
14. 9W-2877 [2] CLAMP  
15. 146-9645 I [1] HOSE AS  
16. 146-9646 I [1] HOSE AS  
17. 146-9647 I [1] HOSE AS  
18. 146-9648 I [1] HOSE AS  
19. 146-9649 I [1] HOSE AS  
20. 146-9650 I [4] HOSE AS  
21. 146-9653 I [1] HOSE AS  
22. 1P-3703 [2] SEAL-RECTANGULAR  
23. 1P-4576 [28] FLANGE-HALF  
24. 1P-5760 [4] FLANGE-HALF  
25. 4J-5140 [2] SEAL-O-RING  
26. 4J-5267 [20] SEAL-O-RING  
27. 4L-6454 [12] BOLT (3/8-16X1-IN)  
28. 5C-6565 [4] BOLT (1/2-13X1.125-IN)  
29. 5P-1076 [14] WASHER-HARD (13.5X30X4-MM THK)  
30. 5S-7382 [48] BOLT (3/8-16X1.375-IN)  
31. 5S-7383 [14] BOLT (3/8-16X1.75-IN)  
32. 7X-0274 [8] BOLT (5/16-18X2.75-IN)  
33. 7X-0515 [3] WASHER-HARD (17X35X5-MM THK)  
34. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
35. 8T-4896 [84] WASHER-HARD (10.2X18.5X2.5-MM THK)  
36. 8T-4994 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
37. 8T-8917 [14] BOLT (1/2-13X1.25-IN)  
38. 8T-9393 [3] BOLT (5/8-11X1.5-IN)  
39. 8T-9398 [8] BOLT (3/4-10X1.75-IN)  
40. 9B-7237 [10] BOLT (3/8-16X1.25-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP29480484
 

164-3272: LINES GP-TILT CYLINDER

164-3272 LINES GP-TILT CYLINDER
S/N AFG1-UP
PART OF 163-5425 HYDRAULIC AR
i01073109 SEBP2948
1643272 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1L-4684 [1] CLAMP-HOSE  
2. 8E-8916 [1] MANIFOLD  
3. 115-1871 I [2] HOSE AS  
4. 194-3126 [1] BRACKET AS  
5. 119-3301 [1] BRACKET AS  
6. 194-3422 [1] BRACKET AS  
7. 141-7081 [1] BRACKET AS  
8. 1P-4576 [8] FLANGE-HALF  
9. 1P-4577 [4] FLANGE-HALF  
10. 4J-0520 [2] SEAL-O-RING  
11. 4J-5267 [4] SEAL-O-RING  
12. 4L-6454 [2] BOLT (3/8-16X1-IN)  
13. 5H-4018 [2] COVER  
14. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
15. 5P-2228 [4] BOLT (1/2-13X1-IN)  
16. 5S-7379 [3] BOLT (3/8-16X0.875-IN)  
17. 5S-7382 [24] BOLT (3/8-16X1.375-IN)  
18. 7G-3832 [5] GROMMET  
19. 7G-3833 [5] CLIP (TAB)  
20. 7G-3834 [5] CLIP (SLOT)  
21. 8T-4223 [14] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 8T-4896 [27] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 8T-8917 [10] BOLT (1/2-13X1.25-IN)  
24. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP29480485
 

214-2423: LINES GP-TILT CYLINDER

214-2423 LINES GP-TILT CYLINDER
S/N J4L1-UP
PART OF 212-7418, 212-7419 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i01770588 SEBP2948
2142423 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-1325 [1] BLOCK  
2. 1U-1344 [2] CLAMP  
3. 4T-6439 [1] GUARD AS  
  3J-5169 [2] NUT-WELD (5/8-11-THD)  
4. 4T-6443 [1] PLATE  
5. 4T-6483 [1] GUARD AS  
6. 4T-6484 [1] GUARD  
7. 9U-8545 I [1] HOSE AS  
8. 9U-8545 I [1] HOSE AS  
9. 1P-4576 [4] FLANGE-HALF  
10. 4J-5140 [1] SEAL-O-RING  
11. 4J-5267 [4] SEAL-O-RING  
12. 5C-6565 [2] BOLT (1/2-13X1.125-IN)  
13. 5P-8112 [2] GROMMET  
14. 7G-3832 [1] GROMMET  
15. 7G-3833 [1] CLIP (TAB)  
16. 7G-3834 [1] CLIP (SLOT)  
17. 7X-0274 [4] BOLT (5/16-18X2.75-IN)  
18. 7X-0344 [2] BOLT (5/8-11X1.375-IN)  
19. 7X-0365 [2] BOLT (3/4-10X1.5-IN)  
20. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
21. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
22. 8T-4133 M [2] NUT (M10X1.5-THD)  
23. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
24. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
25. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
26. 8T-4994 [9] WASHER-HARD (20X36.5X3.5-MM THK)  
27. 8T-9398 [7] BOLT (3/4-10X1.75-IN)  
28. 9B-7237 [8] BOLT (3/8-16X1.25-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP29480486
 

9U-8548: LINES GP-TILT CYLINDER

9U-8548 LINES GP-TILT CYLINDER
S/N 8RH1-99999
PART OF 9U-8549, 9U-8604 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i01360625 SEBP2948
9U8548 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4576 [4] FLANGE-HALF  
2. 4T-6484 [1] GUARD  
3. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 9U-8545 I [2] HOSE AS  
5. 4J-5267 [4] SEAL-O-RING  
6. 4T-6439 [1] GUARD AS  
  3J-5169 [2] NUT-WELD (5/8-11-THD)  
7. 7X-0365 [2] BOLT (3/4-10X1.5-IN)  
8. 8T-4994 [9] WASHER-HARD (20X36.5X3.5-MM THK)  
9. 4T-6483 [1] GUARD AS  
10. 8T-9398 [7] BOLT (3/4-10X1.75-IN)  
11. 7X-0344 [2] BOLT (5/8-11X1.375-IN)  
  8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
12. 9B-7237 [8] BOLT (3/8-16X1.25-IN)  
13. 4T-6443 [1] PLATE  
  5C-6565 [2] BOLT (1/2-13X1.125-IN)  
14. 7G-3832 C [1] GROMMET  
15. 7G-3833 C [1] CLIP (TAB)  
16. 7X-0274 [4] BOLT (5/16-18X2.75-IN)  
  8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
17. 1U-1325 [1] BLOCK  
18. 4J-5140 [1] SEAL-O-RING  
19. 1U-1344 [2] CLAMP  
20. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
21. 7G-3834 C [1] CLIP (SLOT)  
22. 8T-4133 CM [2] NUT (M10X1.5-THD)  
23. 8T-4137 CM [2] BOLT (M10X1.5X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP29480487
 

164-3262: LINES GP-WINCH

164-3262 LINES GP-WINCH
S/N AFG1-UP
PART OF 166-2140 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i01082705 SEBP2948
1643262 LINES GP-WINCH Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-8407 [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
2. 148-8411 [1] PLUG AS  
  3K-0360 [1] SEAL-O-RING  
  9S-4185 [1] PLUG (3/4-16-THD)  
3. 155-3624 [1] PLUG AS  
  3J-7354 [1] SEAL-O-RING  
  9S-4182 [1] PLUG (7/16-20-THD)  
4. 161-8893 Y [1] MANIFOLD GP-HYDRAULIC  
5. 169-6501 I [1] HOSE AS  
6. 169-6502 I [1] HOSE AS  
7. 170-4891 [1] HARNESS AS-SOLENOID (WINCH, REAR)(WINCH - REAR)  
8. 194-0530 I [1] HOSE AS  
9. 148-8336 [1] CONNECTOR AS  
  6V-8636 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
10. 148-8353 [1] ELBOW AS  
  6V-9001 [1] ELBOW  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
11. 148-8354 [1] ELBOW AS  
  6V-9002 [1] ELBOW  
  6V-9002 [1] ELBOW  
  6V-8398 [1] SEAL-O-RING  
12. 148-8372 [1] ELBOW AS  
  6V-8721 [1] ELBOW  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
13. 1P-3703 [2] SEAL-RECTANGULAR  
14. 1P-4577 [4] FLANGE-HALF  
15. 1P-5766 [4] FLANGE-HALF  
16. 4J-0520 [4] SEAL-O-RING  
17. 5P-0047 [2] COVER  
18. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
19. 8C-6877 [8] BOLT (7/16-14X1.75-IN)  
20. 8S-0948 [1] CLIP  
21. 8T-4896 [13] WASHER-HARD (10.2X18.5X2.5-MM THK)  
22. 8T-5360 [8] WASHER (12X22.5X2.5-MM THK)  
23. 8T-9371 [1] BOLT (3/8-16X0.5-IN)  
24. 9B-7237 [4] BOLT (3/8-16X1.25-IN)  
25. 193-3973 [2] STRAP-CABLE  
26. 200-6345 [1] SADDLE-MOUNTING (DUAL SWIVEL)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP29480488
 

161-8893: MANIFOLD GP-HYDRAULIC

161-8893 MANIFOLD GP-HYDRAULIC
S/N AFG1-UP
PART OF 164-3262 LINES GP-WINCH
AN ATTACHMENT
i01038385 SEBP2948
1618893 MANIFOLD GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8167 [1] BOLT (3/8-16X0.625-IN)  
2. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 4P-7581 [1] CLIP (LADDER)  
4. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
 

#SEBP29480489
 

164-8912: MANIFOLD GP-VALVE

164-8912 MANIFOLD GP-VALVE -IMPLEMENTS-IMPLEMENT INLET MANIFOLD
S/N AFG1-UP
PART OF 165-6080 VALVE GP-BANK 3, 162-8307, 162-8308 VALVE GP-CONTROL
ALSO AN ATTACHMENT
i01073226 SEBP2948
1648912 MANIFOLD GP-VALVE Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-6815 [1] PLUG-ORIFICE  
2. 104-7574 Y [1] VALVE GP-RELIEF (IMPLEMENT INLET MANIFOLD)  
3. 168-0299 Y [1] VALVE GP-RELIEF (IMPLEMENT INLET MANIFOLD)  
4. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 148-8407 [2] PLUG AS  
    (EACH INCLUDES)
  9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
6. 155-3624 [1] PLUG AS  
  9S-4182 [1] PLUG (7/16-20-THD)  
  3J-7354 [1] SEAL-O-RING  
7. 1P-4577 [2] FLANGE-HALF  
8. 4T-5896 Y [1] VALVE GP-CHECK (IMPLEMENT INLET MANIFOLD)  
9. 5S-7382 [4] BOLT (3/8-16X1.375-IN)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D7R II :

LINES GP-PUMP
164-3270 LINES GP-PUMP
LINES GP-PILOT
167-7463 LINES GP-PILOT
LINES GP-PILOT
167-7462 LINES GP-PILOT
LINES GP-PILOT
164-4575 LINES GP-PILOT
LINES GP-HYDRAULIC OIL COOLER
164-3264 LINES GP-HYDRAULIC OIL COOLER
LINES GP-BULLDOZER
164-3265 LINES GP-BULLDOZER
163-5425 HYDRAULIC AR
FILTER GP-OIL
9T-1786 FILTER GP-OIL
LINES GP-RIPPER
164-3267 LINES GP-RIPPER
135-8282 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
145-6914 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
164-3272 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
214-2423 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
9U-8548 LINES GP-TILT CYLINDER
LINES GP-WINCH
164-3262 LINES GP-WINCH
MANIFOLD GP-HYDRAULIC
161-8893 MANIFOLD GP-HYDRAULIC

Truck sale:

Caterpillar D7RII, Construction
238,939 
Caterpillar D7RII, Construction
- Dozers
WESTRAC PTY. LTD. (NSW)
Australia
 
260,337 
Caterpillar D7RII, Construction
- Dozers
WESTRAC PTY. LTD. (NSW)
Australia
Caterpillar D7RIILGP, Construction
220,000 
Caterpillar D7RIILGP, Construction
- Dozers
ZIEGLER CAT
Caterpillar D7RIILGP, Construction
179,000 
Caterpillar D7RIILGP, Construction
- Dozers
FOLEY, INC.
Caterpillar D7RIILGP, Construction
244,500 
Caterpillar D7RIILGP, Construction
- Dozers
YANCEY BROS. CO.
GA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.