BASIC ENGINE
GEAR GPCYLINDER HEAD GP
ENGINE ARRANGEMENT
CONVERSION GP-ENGINEENGINE AR
BASIC ENGINE
GEAR GP
#SEBP29590160
7W-1530: HOUSING GP-FRONT
7W-1530 HOUSING GP-FRONT
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-3049 | [1] | GASKET | |
| 2. | 101-0832 | [1] | HOUSING-FRONT DRIVE | |
| 3. | 0S-1587 | [4] | BOLT (1/2-13X1.75-IN) | |
| 4. | 1D-4593 | [10] | BOLT (5/8-11X5.5-IN) | |
| 5. | 8T-6758 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 6. | 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | |
| 7. | 9H-8260 | [4] | BOLT (1/2-13X6.25-IN) | |
| 8. | 9X-8879 | [2] | BOLT (1/2-13X5.5-IN) | |
| 9. | 8T-6765 B | [1] | PLUG-PIPE (1/4-18-THD) | |
| B | USE AS REQUIRED | |||
#SEBP29590161
7W-3724: HOUSING GP-FRONT
7W-3724 HOUSING GP-FRONT -ACCESSORY DRIVE
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-3049 | [1] | GASKET | |
| 2. | 8T-6765 | [5] | PLUG-PIPE (1/4-18-THD) | |
| 3. | 102-8634 | [1] | HOUSING-ACCESSORY DRIVE | |
| 4. | 8T-6758 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 5. | 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | |
| 6. | 9H-8260 | [4] | BOLT (1/2-13X6.25-IN) | |
| 8. | 0S-1587 | [4] | BOLT (1/2-13X1.75-IN) | |
| 9. | 1D-4593 | [10] | BOLT (5/8-11X5.5-IN) | |
| 11. | 8T-6765 B | [1] | PLUG-PIPE (1/4-18-THD) | |
| 13. | 8T-6765 B | [1] | PLUG-PIPE (1/4-18-THD) | |
| B | USE AS REQUIRED | |||
#SEBP29590162
355-0767: KIT-CYLINDER HEAD
355-0767 KIT-CYLINDER HEAD
KIT PROVIDES A STANDARDIZED 3500 SINGLE CYLINDER HEAD KIT FOR MUI APPLICATIONS WITH WATER-COOLED EXHAUST. KIT DOES NOT. CONTAIN INJECTOR SEALS, BREATHER SEALS, VALVE STEM SEALS, OR ROCKER ARM BUTTON SEALS. ORDER AS NEEDED
FOR USE WITH @@@@@ 2W-8862@@@@@, @@@@@ 8N-5802@@@@@, E259- ENGINE S/N 96Y 1-UP, E259- ENGINE S/N 96Y 1-UP, E259- ENGINE S/N 96Y 1-UP, E262- ENGINE S/N 50Y 1-UP, E262- ENGINE S/N 50Y 1-UP, E262- ENGINE S/N 50Y 1-UP, E273- ENGINE S/N 23Z 1-UP, E274- ENGINE S/N 24Z 1-UP, E302- ENGINE S/N 69Z 1-UP, E302- ENGINE S/N 69Z 1-UP, E302- ENGINE S/N 69Z 1-UP, E303 ENGINE S/N 70Z 1-UP, E305- ENGINE S/N 66Z 1-UP, E305- ENGINE S/N 66Z 1-UP, E306- ENGINE S/N 67Z 1-UP
FIELD INSTALLATION
KIT PROVIDES A STANDARDIZED 3500 SINGLE CYLINDER HEAD KIT FOR MUI APPLICATIONS WITH WATER-COOLED EXHAUST. KIT DOES NOT. CONTAIN INJECTOR SEALS, BREATHER SEALS, VALVE STEM SEALS, OR ROCKER ARM BUTTON SEALS. ORDER AS NEEDED
FOR USE WITH @@@@@ 2W-8862@@@@@, @@@@@ 8N-5802@@@@@, E259- ENGINE S/N 96Y 1-UP, E259- ENGINE S/N 96Y 1-UP, E259- ENGINE S/N 96Y 1-UP, E262- ENGINE S/N 50Y 1-UP, E262- ENGINE S/N 50Y 1-UP, E262- ENGINE S/N 50Y 1-UP, E273- ENGINE S/N 23Z 1-UP, E274- ENGINE S/N 24Z 1-UP, E302- ENGINE S/N 69Z 1-UP, E302- ENGINE S/N 69Z 1-UP, E302- ENGINE S/N 69Z 1-UP, E303 ENGINE S/N 70Z 1-UP, E305- ENGINE S/N 66Z 1-UP, E305- ENGINE S/N 66Z 1-UP, E306- ENGINE S/N 67Z 1-UP
FIELD INSTALLATION
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2W-0752 | [1] | GASKET | ||
| 7E-3772 | [1] | GASKET | ||
| 7E-4127 | [1] | GASKET | ||
| 7N-5089 | [1] | GASKET | ||
| 110-6991 | [1] | GASKET-CYLINDER HEAD | ||
| 7N-5080 | [1] | GASKET-MANIFOLD | ||
| 144-5692 | [1] | GASKET-PLATE | ||
| 272-0758 | [1] | SEAL | ||
| 420-0653 | [4] | SEAL AS-WATER | ||
| 420-0652 | [4] | SEAL AS-WATER | ||
| 127-2176 | [1] | SEAL-INTEGRAL | ||
| 2J-0157 | [2] | SEAL-O-RING | ||
| 2M-4453 | [4] | SEAL-O-RING | ||
| 3J-7354 | [4] | SEAL-O-RING | ||
| 5P-0840 | [2] | SEAL-O-RING | ||
| 6V-5101 | [1] | SEAL-O-RING | ||
| 6V-9769 | [2] | SEAL-O-RING | ||
| 214-7568 | [2] | SEAL-O-RING | ||
| 7N-6806 | [2] | SEAL-RECTANGULAR | ||
| 272-0757 | [1] | SEAL-VALVE COVER | ||
| FOR A LIST OF RELATED PARTS REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP29590163
452-9918: KIT-CYLINDER HEAD
452-9918 KIT-CYLINDER HEAD -SINGLE CYLINDER HEAD
FOR USE WITH @@@@@335-6218@@@@@, @@@@@317-2440@@@@@
FIELD INSTALLATION
FOR USE WITH @@@@@335-6218@@@@@, @@@@@317-2440@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 133-9306 | [2] | GUIDE-VALVE (STANDARD)(INLET) | ||
| 149-1982 AB | GUIDE-VALVE (0.508-MM OS) | |||
| 273-3553 AB | GUIDE-VALVE (0.127-MM OS) | |||
| 273-3554 AB | GUIDE-VALVE (0.25-MM OS) | |||
| 301-9248 AB | GUIDE-VALVE (0.38-MM THK) | |||
| 197-6995 | [2] | GUIDE-VALVE (STANDARD) | ||
| 276-3875 AB | GUIDE-VALVE (0.127-MM OS) | |||
| 276-3876 AB | GUIDE-VALVE (0.25-MM OS) | |||
| 320-7710 AB | GUIDE-VALVE (0.381-MM OS, EXHAUST) | |||
| 320-7711 AB | GUIDE-VALVE (0.508-MM OS, EXHAUST) | |||
| 183-8809 | [2] | INSERT-VALVE SEAT (INTAKE)(STANDARD) | ||
| 149-1981 AB | INSERT-VALVE SEAT (0.51-MM OS) | |||
| 289-9745 | [2] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | ||
| 166-5945 AB | INSERT-VALVE SEAT (0.508-MM OS) | |||
| 2A-4429 | [4] | LOCK-RETAINER | ||
| 197-7055 | [4] | LOCK-RETAINER | ||
| 3B-0623 | [5] | PLUG-CUP | ||
| 3B-0645 | [5] | PLUG-CUP | ||
| 9S-8002 | [4] | PLUG (7/16-20-THD) | ||
| 316-5978 | [2] | ROTOCOIL AS (INLET) | ||
| 316-5979 | [2] | ROTOCOIL AS (EXHAUST) | ||
| 214-7566 | [4] | SEAL-O-RING | ||
| 316-5980 | [2] | SEAL-VALVE STEM | ||
| 316-5976 | [4] | SPRING (OUTER) | ||
| 316-5977 | [4] | SPRING (INNER) | ||
| 468-8825 | [2] | VALVE-EXHAUST | ||
| 468-8824 | [2] | VALVE-INLET | ||
| 316-5981 | [2] | WASHER (17.8X44.5X3-MM THK) | ||
| FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP29590164
553-4180: KIT-CYLINDER HEAD
553-4180 KIT-CYLINDER HEAD
SINGLE CYLINDER HEAD OVERHAUL KIT
FOR USE WITH @@@@@335-6218@@@@@, @@@@@317-2440@@@@@
FIELD INSTALLATION
SINGLE CYLINDER HEAD OVERHAUL KIT
FOR USE WITH @@@@@335-6218@@@@@, @@@@@317-2440@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 133-9306 | [2] | GUIDE-VALVE (STANDARD) | ||
| 149-1982 AB | [2] | GUIDE-VALVE (0.508-MM OS) | ||
| 273-3553 AB | [1] | GUIDE-VALVE (0.127-MM OS) | ||
| 273-3554 AB | [1] | GUIDE-VALVE (0.25-MM OS) | ||
| 301-9248 AB | [1] | GUIDE-VALVE (0.38-MM THK) | ||
| 197-6995 | [2] | GUIDE-VALVE (STANDARD) | ||
| 276-3875 AB | [1] | GUIDE-VALVE (0.127-MM OS) | ||
| 276-3876 AB | [1] | GUIDE-VALVE (0.25-MM OS) | ||
| 320-7710 AB | [1] | GUIDE-VALVE (0.381-MM OS, EXHAUST) | ||
| 320-7711 AB | [1] | GUIDE-VALVE (0.508-MM OS, EXHAUST) | ||
| 183-8809 | [2] | INSERT-VALVE SEAT (INTAKE) | ||
| 289-9745 | [2] | INSERT-VALVE SEAT (EXHAUST) | ||
| 2A-4429 | [4] | LOCK-RETAINER | ||
| 197-7055 | [4] | LOCK-RETAINER | ||
| 9S-8002 | [4] | PLUG (7/16-20-THD) | ||
| 3B-0623 | [5] | PLUG-CUP | ||
| 3B-0645 | [5] | PLUG-CUP | ||
| 316-5978 | [2] | ROTOCOIL AS (INLET) | ||
| 316-5979 | [2] | ROTOCOIL AS (EXHAUST) | ||
| 214-7566 | [4] | SEAL-O-RING | ||
| 316-5980 | [2] | SEAL-VALVE STEM | ||
| 468-8825 | [2] | VALVE-EXHAUST | ||
| 468-8824 | [2] | VALVE-INLET | ||
| 316-5981 | [2] | WASHER (17.8X44.5X3-MM THK) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP29590165
350-2143: KIT-ENGINE CONVERSION
350-2143 KIT-ENGINE CONVERSION
RELEASED TO PROVIDE A CONVERSION KIT TO UPGRADE THE MUI 2W-8862 ENGINE ARRANGEMENT TO EUI 100-8317 ENGINE ARRANGEMENT.. THIS KIT INTENDED TO BE USED IN CONJUNCTION WITH AN ENGINE OVERHAUL. REHS4159
PART OF 376-3116 CONVERSION AR-ENGINE
FIELD INSTALLATION
RELEASED TO PROVIDE A CONVERSION KIT TO UPGRADE THE MUI 2W-8862 ENGINE ARRANGEMENT TO EUI 100-8317 ENGINE ARRANGEMENT.. THIS KIT INTENDED TO BE USED IN CONJUNCTION WITH AN ENGINE OVERHAUL. REHS4159
PART OF 376-3116 CONVERSION AR-ENGINE
FIELD INSTALLATION
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 247-8341 Y | [12] | BASE GP-VALVE COVER | ||
| 176-7503 Y | [2] | CONTROL GP-ENGINE ELECTRONIC | ||
| 335-6220 Y | [12] | CYLINDER HEAD GP | ||
| 132-6469 Y | [12] | HARNESS AS-WIRING (VALVE MECHANISM) | ||
| 216-6217 Y | [1] | HOUSING & REGULATOR GP (AFTERCOOLER) | ||
| 392-0206 Y | [12] | INJECTOR GP-FUEL | ||
| 424-3625 Y | [1] | PUMP GP-AUXILIARY WATER | ||
| 119-4890 Y | [2] | TURBOCHARGER GP | ||
| 0L-1143 | [9] | BOLT (3/8-16X2.5-IN) | ||
| 0L-1329 | [2] | BOLT (1/2-13X3-IN) | ||
| 0L-1351 | [10] | BOLT (3/8-16X0.875-IN) | ||
| 0L-2070 | [33] | BOLT (3/8-16X2.25-IN) | ||
| 0S-0509 | [35] | BOLT (3/8-16X0.75-IN) | ||
| 0S-1573 | [4] | BOLT (1/2-13X4-IN) | ||
| 0S-1588 | [8] | BOLT (3/8-16X1.25-IN) | ||
| 0S-1590 | [8] | BOLT (3/8-16X2-IN) | ||
| 0S-1594 | [43] | BOLT (3/8-16X1-IN) | ||
| 0S-1608 | [4] | BOLT (3/8-16X3.75-IN) | ||
| 0S-1615 | [12] | BOLT (1/4-20X0.75-IN) | ||
| 0S-1618 | [22] | BOLT (5/16-18X1-IN) | ||
| 0S-1619 | [2] | BOLT (3/8-16X3-IN) | ||
| 0T-0055 | [3] | BOLT (3/8-16X4.25-IN) | ||
| 0T-0065 | [3] | BOLT (3/8-16X3.5-IN) | ||
| 0T-0573 | [10] | BOLT (3/8-16X2.75-IN) | ||
| 1A-1460 | [4] | BOLT (1/2-13X2-IN) | ||
| 1A-2029 | [9] | BOLT (3/8-16X1.125-IN) | ||
| 1A-5822 | [2] | BOLT (1/2-13X2.75-IN) | ||
| 1A-5964 | [4] | BOLT (3/8-16X4.5-IN) | ||
| 1B-4218 | [6] | WASHER (0.39X0.625X0.064-IN THK) | ||
| 1B-7182 | [24] | BOLT (5/16-18X1.25-IN) | ||
| 1B-9575 | [8] | BOLT (5/16-18X1.56-IN) | ||
| 1C-2251 | [2] | BOLT (3/8-16X1.87-IN) | ||
| 1F-7958 | [8] | NUT-FULL (1/2-13-THD) | ||
| 1N-3872 | [1] | SUPPORT | ||
| 1N-4087 | [1] | ELBOW | ||
| 1T-0720 | [48] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | ||
| 1T-0765 | [1] | BOLT (3/8-16X1-IN) | ||
| 1W-8129 | [2] | SUPPORT | ||
| 2A-4639 | [26] | BOLT (3/8-16X1.625-IN) | ||
| 2A-5220 | [6] | PLUG | ||
| 2B-0947 | [8] | BOLT (1/2-13X2.25-IN) | ||
| 2B-2694 | [1] | BOLT (5/16-18X2-IN) | ||
| 2B-2695 | [1] | BOLT (5/16-18X0.875-IN) | ||
| 2M-0849 | [9] | WASHER-HARD (13.5X25.5X5-MM THK) | ||
| 2P-1297 | [1] | TEE (FLARED) | ||
| 2P-7636 | [2] | CONNECTOR (3/4-16 STR-THD) | ||
| 2V-4387 | [2] | SPACER (10.312X25.4X23.11-MM THK) | ||
| 2W-0752 | [1] | GASKET | ||
| 2W-1053 | [1] | PLUG | ||
| 2W-3146 | [12] | FLANGE | ||
| 2W-5225 | [2] | FLANGE | ||
| 3B-1915 | [6] | BOLT (3/8-16X1.375-IN) | ||
| 3E-4352 | [4] | WASHER-HARD (8.8X20.5X2.5-MM THK) | ||
| 3E-6916 | [96] | NUT-FULL (3/8-16-THD) | ||
| 3J-5389 | [2] | PLUG (EXTERNAL) | ||
| 3J-7354 | [2] | SEAL-O-RING | ||
| 3P-6061 | [1] | GASKET | ||
| 3S-1223 | [2] | SEAL-O-RING | ||
| 3V-3308 | [2] | WASHER-HARD (10.2X20.5X2.5-MM THK) | ||
| 4F-7387 | [1] | SEAL-O-RING | ||
| 4L-8149 | [2] | GASKET | ||
| 4N-1320 | [1] | GASKET (ADAPTER) | ||
| 4P-0692 | [6] | CLAMP AS | ||
| (EACH INCLUDES) | ||||
| 7C-2199 | [1] | CLAMP | ||
| 108-1434 | [1] | GROMMET | ||
| 4P-1491 | [2] | STRAP | ||
| 4P-1531 | [2] | FLANGE | ||
| 4P-2007 | [4] | SPACER (17X32X11.5-MM THK) | ||
| 4P-2163 | [1] | BRACKET | ||
| 4P-3563 | [8] | CLAMP AS | ||
| (EACH INCLUDES) | ||||
| 4P-0726 | [1] | CLAMP | ||
| 108-1434 | [1] | GROMMET | ||
| 4P-3897 | [2] | MANIFOLD (INTERMEDIATE) | ||
| 4P-4616 | [2] | COUPLING | ||
| 4P-4642 | [2] | RETAINER-EYE | ||
| 4P-5296 | [1] | TUBE AS | ||
| 4P-5297 | [1] | TUBE AS | ||
| 4P-7680 | [12] | SPACER (10.5X22.5X15-MM THK) | ||
| 4S-5898 | [12] | SEAL-O-RING | ||
| 4W-0530 | [6] | RING-RETAINING | ||
| 4W-0531 | [12] | RETAINER | ||
| 4W-5890 | [1] | PLUG | ||
| 5A-3604 M | [4] | BOLT-SOCKET HEAD (M8X1.25X25-MM) | ||
| 5B-0841 | [4] | BOLT (5/8-18X1.75-IN) | ||
| 5B-2638 | [2] | BOLT (3/8-16X5.25-IN) | ||
| 5B-4399 | [1] | SEAL-O-RING | ||
| 5J-5793 | [4] | BOLT-12 POINT HEAD (1/2-13X2-IN) | ||
| 5M-2894 | [208] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5N-1939 | [1] | COVER | ||
| 5N-1940 | [1] | GASKET | ||
| 5P-0537 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 5P-2645 | [1] | ELBOW | ||
| 5P-2755 | [4] | BOLT-HIGH TEMPERATURE (3/8-16X2.75-IN) | ||
| 5P-4295 | [1] | CLIP | ||
| 5P-4318 | [1] | ELBOW | ||
| 5P-7530 | [12] | SEAL-O-RING | ||
| 5P-7701 | [2] | SEAL-O-RING | ||
| 5P-7817 | [1] | SEAL-O-RING | ||
| 5P-8245 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 5P-8247 | [12] | WASHER-HARD (17X32X3.5-MM THK) | ||
| 6H-1717 | [1] | BOLT (1/2-13X1.125-IN) | ||
| 6H-6698 | [1] | COVER | ||
| 6I-1418 | [8] | SPACER (8.2X12.7X28.7-MM THK) | ||
| 6J-2245 | [12] | SEAL-O-RING | ||
| 6J-2680 | [6] | SEAL-O-RING | ||
| 6V-0301 | [2] | ADAPTER | ||
| 6V-1454 | [2] | SEAL-O-RING | ||
| 6V-1903 | [8] | SEAL-O-RING | ||
| 6V-3348 | [1] | SEAL-O-RING | ||
| 6V-4248 M | [8] | BOLT (M10X1.5X25-MM) | ||
| 6V-4589 | [3] | SEAL-O-RING | ||
| 6V-4605 | [8] | LOCKNUT (5/8-11-THD) | ||
| 6V-4606 | [4] | BOLT-HIGH TEMPERATURE (5/8-11X2.75-IN) | ||
| 6V-5048 | [2] | SEAL-O-RING | ||
| 6V-5050 | [3] | SEAL-O-RING | ||
| 6V-5054 | [2] | SEAL-O-RING | ||
| 6V-5066 | [1] | SEAL-O-RING | ||
| 6V-5101 | [12] | SEAL-O-RING | ||
| 6V-5103 | [8] | SEAL-O-RING | ||
| 6V-5134 | [4] | SEAL-O-RING | ||
| 6V-6228 | [36] | SEAL-O-RING | ||
| 6V-6609 | [2] | SEAL-O-RING | ||
| 6V-9027 | [2] | SEAL-O-RING | ||
| 7C-7909 | [10] | ELBOW (AIR INLET) | ||
| 7C-7910 | [2] | ELBOW (AIR INLET) | ||
| 7C-8199 | [12] | FLANGE | ||
| 7C-9597 | [4] | FLANGE | ||
| 7E-0015 | [2] | COVER | ||
| 7E-1078 | [1] | TUBE AS | ||
| 7E-1079 | [1] | TUBE AS | ||
| 7E-1456 | [2] | CONNECTOR | ||
| 7E-2326 | [2] | SEAL-RING | ||
| 7E-2580 | [12] | CLAMP-INJECTOR | ||
| 7E-2909 | [2] | ELBOW | ||
| 7E-2910 | [2] | BRACKET | ||
| 7E-6508 | [12] | CAP AS | ||
| 7E-7950 | [1] | PLATE | ||
| 7E-8973 | [1] | BRACKET | ||
| 7F-2060 | [1] | LOCKNUT (7/8-14-THD) | ||
| 7F-8698 | [12] | BOLT (7/16-14X3.5-IN) | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 7K-3377 | [1] | PIPE | ||
| 7L-6443 | [92] | BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN) | ||
| 7N-3297 | [1] | COVER | ||
| 7N-3368 | [1] | GASKET | ||
| 7N-4782 | [24] | SPRING-LIFTER GUIDE | ||
| 7N-5080 | [12] | GASKET-MANIFOLD | ||
| 7W-6492 | [1] | PLUG-PIPE (1/2-14-THD) | ||
| 7X-0457 M | [4] | BOLT (M8X1.25X130-MM) | ||
| 7X-7731 | [1] | PLUG-PIPE (3/4-14-THD) | ||
| 8C-3445 | [1] | CAP-DUST | ||
| 8C-3446 | [1] | VALVE-SAMPLING | ||
| 8C-8491 | [188] | WASHER-HARD (10.2X22X3-MM THK) | ||
| 8C-8581 M | [16] | BOLT-HIGH TEMPERATURE (M10X1.5X30-MM) | ||
| 8D-7942 | [24] | BOLT-12 POINT HEAD (5/8-11X6.5-IN) | ||
| 8L-5423 | [1] | SPACER (0.406X1X0.712-IN THK) | ||
| 8M-0547 | [2] | ELBOW-FLARED (SWIVEL) | ||
| 8M-0744 | [1] | NUT-FLARED (1-1/16-12-THD) | ||
| 8M-0745 | [1] | REDUCER-FLARED | ||
| 8M-9024 | [8] | WASHER-HARD (10.2X22.5X5-MM THK) | ||
| 8N-0386 | [1] | FLANGE | ||
| 8N-1989 | [1] | TUBE | ||
| 8N-1992 | [2] | RETAINER | ||
| 8N-7639 | [12] | ELBOW | ||
| 8N-9885 | [1] | GASKET-COVER | ||
| 8N-9993 | [1] | COVER-CAMSHAFT | ||
| 8S-4951 | [1] | CAP (FLARED) | ||
| 8T-1919 | [6] | SEAL-O-RING | ||
| 8T-6761 | [2] | PLUG-PIPE (1-11-1/2 NPT THD) | ||
| 8T-6762 | [11] | PLUG-PIPE (1/2-14-THD) | ||
| 8T-6764 | [2] | PLUG-PIPE (1/8-27-THD) | ||
| 8T-6765 | [3] | PLUG-PIPE (1/4-18-THD) | ||
| 8T-7934 | [16] | WASHER-HARD (11X21X5-MM THK) | ||
| 8T-9655 | [16] | MOUNT-ISOLATION | ||
| 8X-2041 | [1] | FLANGE | ||
| 9F-2773 | [10] | BOLT (3/8-16X8.5-IN) | ||
| 9F-7707 | [36] | RING-RETAINING | ||
| 9L-7373 | [48] | BOLT-HIGH TEMPERATURE (3/8-16X2-IN) | ||
| 9L-9132 | [22] | WASHER (10.2X25.5X2.5-MM THK) | ||
| 9M-1974 | [24] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9N-0869 | [10] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| 9S-4182 | [3] | PLUG (7/16-20-THD) | ||
| 9S-4185 | [2] | PLUG (3/4-16-THD) | ||
| 9S-4188 | [4] | PLUG | ||
| 9S-8752 | [27] | NUT-FULL (3/8-16-THD) | ||
| 9X-0352 | [12] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 9X-6458 | [16] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 9X-8285 | [4] | BOLT-HIGH TEMPERATURE (5/8-11X3.5-IN) | ||
| 9Y-0637 | [1] | BRACKET | ||
| 9Y-0860 | [1] | TUBE AS-SUPPLY | ||
| 9Y-6893 | [2] | GASKET | ||
| 9Y-7759 | [1] | TUBE-OIL DRAIN | ||
| 9Y-7760 | [1] | TUBE-OIL DRAIN | ||
| 9Y-8943 | [2] | ADAPTER-AIR CLEANER | ||
| 005-9702 | [1] | TEE-UNION | ||
| 008-8381 | [2] | ELBOW | ||
| 030-3978 | [1] | CONNECTOR | ||
| 030-7972 | [1] | ELBOW | ||
| 030-7982 | [1] | UNION-FLARED | ||
| 061-7738 | [1] | TEE-FLARED | ||
| 100-3145 | [1] | MANIFOLD-EXHAUST (FRONT, RH) | ||
| 100-3146 | [5] | MANIFOLD-EXHAUST (INTERMEDIATE, RH) | ||
| 100-3147 | [1] | MANIFOLD-EXHAUST (FRONT, LH) | ||
| 100-3148 | [4] | MANIFOLD-EXHAUST (INTERMEDIATE, LH) | ||
| 100-3149 | [1] | MANIFOLD-EXHAUST (REAR, LH) | ||
| 100-3877 | [12] | RETAINER-SPRING | ||
| 100-3878 | [12] | SPRING-INJECTOR | ||
| 100-3879 | [12] | PUSHROD-INJECTOR | ||
| 100-3880 | [24] | PUSHROD-VALVE | ||
| 101-1198 | [14] | BEARING-CAMSHAFT | ||
| 101-1364 | [2] | GEAR AS-IDLER (69-TEETH) | ||
| (EACH INCLUDES) | ||||
| 125-9751 | [1] | BUSHING | ||
| 101-1366 | [1] | SHAFT-GEAR (CLUSTER) | ||
| 101-1367 | [2] | SHAFT-IDLER | ||
| 101-1369 | [2] | GEAR-CAMSHAFT DRIVE (70-TEETH) | ||
| 101-1370 | [1] | GEAR-CRANKSHAFT (92-TEETH) | ||
| 101-4197 | [9] | COVER | ||
| 101-4199 | [3] | COVER AS | ||
| 107-3759 | [2] | SEAL | ||
| 107-6864 | [2] | BRACKET | ||
| 107-7954 | [4] | SPACER (10.2X22X8-MM THK) | ||
| 109-2332 | [1] | SEAL-O-RING | ||
| 109-7411 | [2] | SEAL-O-RING | ||
| 110-6995 | [1] | PLATE | ||
| 110-9538 | [1] | TUBE | ||
| 111-0349 | [1] | BRACKET-MODULE | ||
| 111-2077 | [1] | COVER | ||
| 111-2078 | [2] | STRAP | ||
| 111-3388 | [1] | TUBE AS | ||
| 111-3389 | [1] | TUBE AS | ||
| 111-3824 | [1] | TUBE AS | ||
| 111-3825 | [2] | TUBE AS | ||
| 111-5052 | [1] | BRACKET | ||
| 111-5056 | [1] | CONNECTOR | ||
| 111-8276 | [1] | MANIFOLD (REAR, LH) | ||
| 111-8277 | [1] | MANIFOLD (REAR, RH) | ||
| 111-9374 | [1] | HOUSING-REGULATOR | ||
| 114-2040 | [1] | ELBOW | ||
| 114-3372 | [1] | GEAR AS-CLUSTER (92/35-TEETH) | ||
| 101-1372 | [1] | BUSHING | ||
| 116-3249 | [1] | BRACKET | ||
| 117-0066 | [1] | BRACKET-MOUNTING | ||
| 119-0838 | [12] | SPACER (17.5X30.94X98-MM) | ||
| 119-0839 | [12] | SPACER (17.5X30.94X98-MM) | ||
| 119-7333 | [1] | HOUSING AS | ||
| 120-4344 | [1] | ADAPTER | ||
| 120-7425 | [1] | FLANGE | ||
| 121-2022 | [1] | TUBE | ||
| 121-2023 | [1] | TUBE | ||
| 122-3374 | [2] | ELBOW (AIR INLET) | ||
| 122-3375 | [1] | PIPE-AIR | ||
| 122-3376 | [1] | PIPE-AIR | ||
| 122-8856 | [2] | GASKET | ||
| 124-1961 | [2] | COUPLING-PERMANENT | ||
| 125-2784 | [2] | ELBOW | ||
| 126-2209 | [1] | ELBOW-EXHAUST (LH) | ||
| 128-9506 | [1] | ELBOW-EXHAUST (RH) | ||
| 129-3083 | [1] | ELBOW | ||
| 129-9528 | [1] | PLATE | ||
| 133-8382 | [12] | BRACKET | ||
| 135-6912 | [1] | ELBOW-EXHAUST | ||
| 135-6913 | [1] | SUPPORT | ||
| 141-9285 | [1] | ELBOW | ||
| 154-1616 | [1] | MANIFOLD (FRONT, LH) | ||
| 154-1617 | [1] | MANIFOLD (FRONT, RH) | ||
| 154-6389 | [36] | BUTTON | ||
| 155-0461 | [1] | PLATE AS | ||
| 165-3929 | [6] | BOLT (3/8-16X1.5-IN) | ||
| 174-7088 | [1] | HOSE AS | ||
| 187-4606 | [1] | HOSE AS | ||
| 193-3286 | [1] | RETAINER-EYE | ||
| 196-5052 | [5] | CLIP (SLOT) | ||
| 196-5053 | [5] | CLIP (TAB) | ||
| 207-1364 | [10] | BELLOWS AS | ||
| 210-2532 | [2] | BELLOWS AS | ||
| 214-0731 | [1] | BRACKET | ||
| 222-9921 | [1] | HOUSING-FLYWHEEL | ||
| 228-7097 | [1] | SEAL-O-RING | ||
| 229-5332 | [12] | SEAL | ||
| 229-5333 | [24] | SEAL | ||
| 230-1072 | [1] | GASKET | ||
| 230-2621 | [24] | ROCKER ARM AS | ||
| (EACH INCLUDES) | ||||
| 8N-7197 | [1] | SOCKET-ARM | ||
| 230-2620 | [1] | BUSHING | ||
| 230-2633 | [12] | SHAFT AS (ROCKER ARM) | ||
| (EACH INCLUDES) | ||||
| 155-4094 | [1] | PIN-SPRING | ||
| 235-3546 | [1] | SEAL-O-RING | ||
| 237-2712 | [1] | TUBE AS | ||
| 237-2713 | [1] | TUBE AS | ||
| 238-5080 | [2] | SEAL-O-RING | ||
| 240-7032 | [12] | SEAL | ||
| 241-5928 | [12] | GASKET | ||
| 243-2288 | [4] | GASKET | ||
| 252-8374 | [4] | GASKET | ||
| 272-0760 | [21] | SEAL-VALVE COVER | ||
| 281-6159 | [12] | ROCKER ARM AS | ||
| (EACH INCLUDES) | ||||
| 8N-7197 | [1] | SOCKET-ARM | ||
| 230-2620 | [1] | BUSHING | ||
| 282-7944 | [12] | LIFTER AS-INJECTOR | ||
| 282-8217 | [1] | CORE AS-AFTERCOOLER | ||
| 283-9599 | [1] | MANIFOLD (AIR INLET) | ||
| 284-1460 | [1] | SUPPORT AS | ||
| 299-5204 | [12] | PISTON AS | ||
| 317-1121 | [12] | NUT-JAM (5/8-18-THD) | ||
| 359-4122 | [1] | ELBOW | ||
| 380-4843 | [12] | SCREW-ADJUSTING (5/8-18X2.375-IN) | ||
| 416-8319 | [24] | LIFTER AS-VALVE | ||
| 452-2501 | [1] | CAMSHAFT AS (REAR, RH) | ||
| 4N-1650 | [1] | DOWEL | ||
| 452-2502 | [1] | CAMSHAFT AS (REAR, LH) | ||
| 5B-5821 | [1] | DOWEL | ||
| 452-2503 | [1] | CAMSHAFT AS (FRONT, LH) | ||
| 4N-1650 | [1] | DOWEL | ||
| 452-2504 | [1] | CAMSHAFT AS (FRONT, RH) | ||
| 5B-5821 | [1] | DOWEL | ||
| 457-0780 | [2] | FLANGE | ||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29590166
357-1809: KIT-ENGINE CONVERSION
357-1809 KIT-ENGINE CONVERSION
EMISSIONS UPGRADE GROUP RETROFIT THE 100-8317 EUI ENGINE ARRANGEMENT TO TIER II 320-0275 ENGINE ARRANGEMENT, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
FOR USE WITH 3512B, 1600 RPM
FIELD INSTALLATION
EMISSIONS UPGRADE GROUP RETROFIT THE 100-8317 EUI ENGINE ARRANGEMENT TO TIER II 320-0275 ENGINE ARRANGEMENT, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
FOR USE WITH 3512B, 1600 RPM
FIELD INSTALLATION
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 231-9999 Y | [1] | BOX GP-JUNCTION | ||
| 335-6220 Y | [12] | CYLINDER HEAD GP | ||
| 445-7603 Y | [1] | HARNESS AS-ENGINE (LH) | ||
| 445-7605 Y | [1] | HARNESS AS-ENGINE (RH) | ||
| 415-2430 Y | [2] | SENSOR GP-EXHAUST TEMPERATURE | ||
| 304-5666 Y | [4] | SENSOR GP-PRESSURE | ||
| 304-5667 Y | [1] | SENSOR GP-PRESSURE | ||
| 212-3426 Y | [2] | SENSOR GP-SPEED | ||
| 212-3423 Y | [2] | SENSOR GP-TEMPERATURE | ||
| 528-8390 Y | [2] | TURBOCHARGER GP | ||
| 9X-0262 | [1] | ADAPTER | ||
| 8T-2353 | [1] | ADAPTER | ||
| 135-9941 | [2] | ADAPTER | ||
| 264-3073 | [1] | ADAPTER | ||
| 282-4165 | [1] | ADAPTER | ||
| 359-4123 | [1] | ADAPTER | ||
| 365-4215 | [1] | ADAPTER | ||
| 307-5472 | [4] | BELLOWS | ||
| 311-3548 | [2] | BELLOWS AS | ||
| 9X-8874 | [2] | BOLT (1/2-13X3-IN) | ||
| 0S-0509 | [6] | BOLT (3/8-16X0.75-IN) | ||
| 0S-1588 | [12] | BOLT (3/8-16X1.25-IN) | ||
| 0L-2070 | [2] | BOLT (3/8-16X2.25-IN) | ||
| 1D-4533 | [2] | BOLT (1/4-20X2.25-IN) | ||
| 0L-1143 | [7] | BOLT (3/8-16X2.5-IN) | ||
| 0L-2070 | [5] | BOLT (3/8-16X2.25-IN) | ||
| 165-3931 | [6] | BOLT (3/8-16X1.75-IN) | ||
| 0S-1585 | [1] | BOLT (1/2-13X1.5-IN) | ||
| 0S-1587 | [2] | BOLT (1/2-13X1.75-IN) | ||
| 0S-1590 | [35] | BOLT (3/8-16X2-IN) | ||
| 165-3929 | [19] | BOLT (3/8-16X1.5-IN) | ||
| 0S-1594 | [16] | BOLT (3/8-16X1-IN) | ||
| 0S-1595 | [4] | BOLT (1/2-13X1.25-IN) | ||
| 0T-0055 | [2] | BOLT (3/8-16X4.25-IN) | ||
| 2A-4639 | [1] | BOLT (3/8-16X1.625-IN) | ||
| 0S-1588 | [9] | BOLT (3/8-16X1.25-IN) | ||
| 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | ||
| 1A-5183 | [2] | BOLT (3/8-16X4.75-IN) | ||
| 1A-5822 | [12] | BOLT (1/2-13X2.75-IN) | ||
| 1A-9579 | [8] | BOLT (5/16-18X1.5-IN) | ||
| 1D-4540 | [4] | BOLT (5/16-18X2.75-IN) | ||
| 2B-2695 | [1] | BOLT (5/16-18X0.875-IN) | ||
| 6V-1612 | [4] | BOLT (1/2-13X9.75-IN) | ||
| 8J-5985 | [10] | BOLT (3/8-16X12.375-IN) | ||
| 8S-9191 | [3] | BOLT (3/8-16X4-IN) | ||
| 9H-8260 | [8] | BOLT (1/2-13X6.25-IN) | ||
| 9L-2295 | [12] | BOLT-HIGH TEMPERATURE (3/8-16X1.5-IN) | ||
| 6W-2928 | [1] | BOSS | ||
| 345-7620 | [1] | BRACKET | ||
| 387-9473 | [1] | BRACKET | ||
| 388-0672 | [1] | BRACKET | ||
| 4P-9226 | [1] | BRACKET | ||
| 7E-6369 | [1] | BRACKET | ||
| 7N-4940 | [2] | BRACKET | ||
| 7W-2124 | [2] | BRACKET | ||
| 134-6275 | [2] | BRACKET | ||
| 231-7070 | [1] | BRACKET | ||
| 245-0522 | [1] | BRACKET | ||
| 245-0523 | [2] | BRACKET | ||
| 281-6008 | [1] | BRACKET | ||
| 281-6009 | [1] | BRACKET | ||
| 282-4209 | [1] | BRACKET | ||
| 253-6217 | [1] | BRACKET AS | ||
| 261-7296 | [1] | BRACKET AS | ||
| 284-1596 | [1] | BRACKET AS | ||
| 9G-5127 | [1] | BREATHER (ATMOSPHERIC)(ATMOSPHERIC) | ||
| 4W-3027 | [1] | BREATHER AS (CRANKCASE) | ||
| 118-1656 | [1] | BUSHING-REDUCER | ||
| 283-5732 | [1] | CAMSHAFT AS | ||
| 4N-1650 | [1] | DOWEL | ||
| 283-5738 | [1] | CAMSHAFT AS | ||
| 4N-1650 | [1] | DOWEL | ||
| 308-5353 | [1] | CAMSHAFT AS | ||
| 5B-5821 | [1] | DOWEL | ||
| 308-5355 | [1] | CAMSHAFT AS | ||
| 5B-5821 | [1] | DOWEL | ||
| 6V-9832 | [1] | CAP (ORFS) | ||
| 262-6104 | [1] | CAP AS-ENGINE OIL FILLER | ||
| 239-6808 | [4] | CLAMP (V-BAND) | ||
| 4P-0692 | [2] | CLAMP AS | ||
| (EACH INCLUDES) | ||||
| 108-1434 | [1] | GROMMET | ||
| 4P-3563 | [8] | CLAMP AS | ||
| (EACH INCLUDES) | ||||
| 108-1434 | [1] | GROMMET | ||
| 153-9481 | [4] | CLAMP AS | ||
| 374-8142 | [4] | CLAMP-BAND | ||
| 4W-3034 | [1] | CLAMP-HOSE | ||
| 5P-0597 | [1] | CLAMP-HOSE | ||
| 3A-3692 | [2] | CLIP | ||
| 4P-7581 | [4] | CLIP (LADDER) | ||
| 4P-8134 | [24] | CLIP (LADDER) | ||
| 139-1398 | [2] | CLIP (LOOP) | ||
| 6K-4934 | [1] | CLIP (SLOT) | ||
| 6K-4935 | [1] | CLIP (TAB) | ||
| 6V-1581 | [1] | CLIP (SLOT) | ||
| 6V-1582 | [1] | CLIP (TAB) | ||
| 6V-1867 | [3] | CLIP (SLOT) | ||
| 6V-1868 | [3] | CLIP (TAB) | ||
| 6V-6758 | [1] | CLIP | ||
| 6V-6759 | [1] | CLIP | ||
| 7G-5984 | [4] | CLIP (TAB) | ||
| 7G-5985 | [4] | CLIP (SLOT) | ||
| 001-9440 | [1] | CONNECTOR | ||
| 6V-8716 | [1] | CONNECTOR (STRAIGHT) | ||
| 6V-9874 | [2] | CONNECTOR (STRAIGHT) | ||
| 8T-7494 | [3] | CONNECTOR (STRAIGHT) | ||
| 348-2387 | [1] | CONTROL GP-ENGINE ELECTRONIC | ||
| 7X-6315 | [1] | STRAP AS-GROUND | ||
| 184-2472 | [1] | SCREW-PAN HEAD (8-32X0.375-IN) | ||
| 245-4622 | [1] | CORE AS-AFTERCOOLER | ||
| 285-8436 | [1] | COVER (AIR INLET) | ||
| 101-4199 | [2] | COVER AS | ||
| 133-6484 | [1] | COVER-BOX | ||
| 8N-9992 | [1] | COVER-CAMSHAFT | ||
| 179-1510 | [1] | COVER-SHIPPING | ||
| 5P-3426 | [1] | ELBOW | ||
| 6V-8626 | [1] | ELBOW | ||
| 6V-9007 | [1] | ELBOW | ||
| 6V-9853 | [1] | ELBOW | ||
| 137-8219 | [1] | ELBOW | ||
| 215-9090 | [1] | ELBOW (90-DEG) | ||
| 227-0056 | [2] | ELBOW | ||
| 282-4159 | [1] | ELBOW-EXHAUST | ||
| 230-1072 | [1] | GASKET | ||
| 1W-6356 | [1] | GASKET | ||
| 276-4666 | [2] | GASKET | ||
| 193-2120 | [3] | GROMMET | ||
| 278-6469 | [4] | GROMMET | ||
| 111-3684 | [1] | HOSE AS | ||
| 313-6221 | [1] | HOSE AS | ||
| 313-6222 | [1] | HOSE AS | ||
| 217-6692 | [1] | HOSE-TEE | ||
| 392-0220 | [12] | INJECTOR GP-FUEL | ||
| (EACH INCLUDES) | ||||
| 245-4907 | [1] | SEAL-O-RING | ||
| 245-4908 | [1] | SEAL-O-RING | ||
| 031-4155 | [1] | LOCKNUT (5/16-18-THD) | ||
| 415-5863 | [1] | MANIFOLD-EXHAUST | ||
| 415-5864 | [1] | MANIFOLD-EXHAUST | ||
| 4P-0870 | [4] | MOUNT-FLEXIBLE | ||
| 155-0576 | [8] | MOUNT-ISOLATION | ||
| 6V-9170 | [1] | NUT-BULKHEAD (1-14-THD) | ||
| 9S-8752 | [3] | NUT-FULL (3/8-16-THD) | ||
| 1F-7958 | [1] | NUT-FULL (1/2-13-THD) | ||
| 9S-8752 | [24] | NUT-FULL (3/8-16-THD) | ||
| 374-2082 | [12] | PISTON AS | ||
| 117-9308 | [2] | PLATE | ||
| 3J-5389 | [3] | PLUG (EXTERNAL) | ||
| 3K-8460 | [1] | PLUG (1/2-20-THD) | ||
| 8C-4423 | [4] | PLUG | ||
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 9S-4185 | [1] | PLUG (3/4-16-THD) | ||
| 9S-4182 | [2] | PLUG (7/16-20-THD) | ||
| 9S-4190 | [2] | PLUG-O-RING (7/8-14-THD) | ||
| 8T-6761 | [1] | PLUG-PIPE (1-11-1/2 NPT THD) | ||
| 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | ||
| 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | ||
| 8T-6767 | [1] | PLUG-PIPE (3/8-18-THD) | ||
| 153-9963 | [2] | RING | ||
| 6V-5048 | [5] | SEAL-O-RING | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 1J-9671 | [1] | SEAL-O-RING | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 3K-0360 | [2] | SEAL-O-RING | ||
| 5P-8210 | [1] | SEAL-O-RING | ||
| 136-7227 | [2] | SEAL-O-RING | ||
| 6V-5048 | [2] | SEAL-O-RING | ||
| 6V-9746 | [19] | SEAL-O-RING | ||
| 7M-8485 | [2] | SEAL-O-RING | ||
| 8C-3107 | [2] | SEAL-O-RING | ||
| 8T-7525 | [8] | SEAL-O-RING | ||
| 033-6031 | [1] | SEAL-O-RING | ||
| 214-7568 | [8] | SEAL-O-RING | ||
| 228-7091 | [6] | SEAL-O-RING | ||
| 228-7103 | [2] | SEAL-O-RING | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 272-0760 | [2] | SEAL-VALVE COVER | ||
| 2V-4387 | [8] | SPACER (10.312X25.4X23.11-MM THK) | ||
| 4S-5719 | [1] | SPACER (10.31X25X12.7-MM THK) | ||
| 6B-0933 | [4] | SPACER (10.31X19.05X6.35-MM THK) | ||
| 6B-6205 | [1] | SPACER (0.438X0.875X1.281-IN THK) | ||
| 9G-8140 | [4] | SPACER (10.5X25X15-MM THK) | ||
| 9R-5008 | [1] | SPACER (11X20X6-MM THK) | ||
| 9R-7882 | [8] | SPACER (14X25X7-MM THK) | ||
| 107-7954 | [8] | SPACER (10.2X22X8-MM THK) | ||
| 166-4116 | [2] | SPACER (10X16X20-MM THK) | ||
| 112-1567 | [2] | STRAP | ||
| 7K-1181 | [39] | STRAP-CABLE | ||
| 7N-6986 | [1] | SUPPORT | ||
| 316-2492 | [1] | SUPPORT | ||
| 310-1028 | [2] | TAG-INFORMATION | ||
| 8T-1685 | [1] | TEE | ||
| 6V-9350 | [1] | TEE-BULKHEAD | ||
| 6V-8791 | [2] | TEE-FACE SEAL | ||
| 1L-4031 | [1] | TEE-SERVICE | ||
| 6V-9839 | [1] | TEE-SWIVEL | ||
| 268-0028 | [1] | TUBE | ||
| 282-4144 | [1] | TUBE | ||
| 307-8310 | [1] | TUBE | ||
| 8N-6326 | [1] | TUBE AS | ||
| 210-2535 | [1] | TUBE AS | ||
| 282-4134 | [1] | TUBE AS | ||
| 282-4140 | [1] | TUBE AS | ||
| 282-4141 | [1] | TUBE AS | ||
| 282-4142 | [1] | TUBE AS | ||
| 282-4145 | [1] | TUBE AS | ||
| 282-4146 | [1] | TUBE AS | ||
| 289-3571 | [1] | TUBE AS | ||
| 308-6822 | [1] | TUBE AS | ||
| 313-7143 | [1] | TUBE AS | ||
| 338-7519 | [1] | TUBE-AIR (RH) | ||
| 338-7520 | [1] | TUBE-AIR (LH) | ||
| 9L-9132 | [3] | WASHER (10.2X25.5X2.5-MM THK) | ||
| 110-8314 | [160] | WASHER (10.3X18.3X2.66-MM THK) | ||
| 5M-2894 | [23] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-0537 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 3V-3308 | [6] | WASHER-HARD (10.2X20.5X2.5-MM THK) | ||
| 5M-2894 | [46] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-8245 | [22] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 9M-1974 | [9] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9N-0869 | [1] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| 9X-6458 | [29] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 128-5993 | [2] | WASHER-THRUST | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29590167
305-2664: KIT-ENGINE GASKET
305-2664 KIT-ENGINE GASKET -CENTRAL, LOWER STRUCTURE
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS
FOR USE WITH @@@@@ 2W-8862@@@@@, @@@@@ 8N-5802@@@@@
FIELD INSTALLATION
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS
FOR USE WITH @@@@@ 2W-8862@@@@@, @@@@@ 8N-5802@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6F-4868 | [2] | GASKET | ||
| 7N-4945 | [3] | GASKET | ||
| 9L-1480 | [3] | GASKET | ||
| 2W-0752 | [2] | GASKET | ||
| 230-1072 | [1] | GASKET | ||
| 7E-2630 | [1] | GASKET-OIL PAN | ||
| 272-0758 | [12] | SEAL | ||
| 272-0759 | [12] | SEAL | ||
| 5F-9657 | [4] | SEAL-O-RING | ||
| 447-7206 | [4] | SEAL-O-RING | ||
| 7X-4805 | [3] | SEAL-O-RING | ||
| 8T-2928 | [3] | SEAL-O-RING | ||
| 8T-2929 | [3] | SEAL-O-RING | ||
| 214-7568 | [6] | SEAL-O-RING | ||
| 259-4600 | [4] | SEAL-O-RING | ||
| 5P-7818 | [1] | SEAL-O-RING | ||
| 5P-8210 | [2] | SEAL-O-RING | ||
| 5P-8872 | [1] | SEAL-O-RING | ||
| 6V-4314 | [1] | SEAL-O-RING | ||
| 6V-5101 | [3] | SEAL-O-RING | ||
| 310-3954 | [2] | SEAL-O-RING | ||
| 259-4598 | [1] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP29590168
457-6719: KIT-ENGINE GASKET
457-6719 KIT-ENGINE GASKET -TURBOCHARGER
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE
PART OF 494-1221, 494-1279 KIT-ENGINE OVERHAUL
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE
PART OF 494-1221, 494-1279 KIT-ENGINE OVERHAUL
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2N-2765 | [4] | BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN) | ||
| 121-5736 | [1] | GASKET (TURBOCHARGER) | ||
| 252-8374 | [1] | GASKET | ||
| 1S-4810 | [1] | GASKET-OIL DRAIN | ||
| 1S-6595 | [1] | GASKET-OIL SUPPLY | ||
| 391-2167 | [4] | LOCKNUT-FLANGE (3/8X16-THD) | ||
| 112-3540 | [1] | SEAL-O-RING | ||
| 6V-3319 | [2] | SEAL-O-RING | ||
| 6V-3917 | [2] | SEAL-O-RING | ||
| 136-7227 | [1] | SEAL-O-RING | ||
| 6V-5167 | [2] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP29590169
457-9709: KIT-ENGINE GASKET
457-9709 KIT-ENGINE GASKET -FRONT COVER
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@ 2W-8862@@@@@, @@@@@ 8N-5802@@@@@
FIELD INSTALLATION
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@ 2W-8862@@@@@, @@@@@ 8N-5802@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 3512 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1S-5772 | [1] | GASKET | ||
| 2N-0931 | [4] | GASKET | ||
| 4N-1320 | [2] | GASKET (ADAPTER) | ||
| 7J-8114 | [1] | GASKET | ||
| 7N-3049 | [1] | GASKET | ||
| 7N-3368 | [1] | GASKET | ||
| 7N-4932 | [1] | GASKET | ||
| 8N-1996 | [1] | GASKET | ||
| 8N-9885 | [1] | GASKET-COVER | ||
| 436-1478 | [1] | SEAL-CRANKSHAFT (CLOCKWISE ROTATION) | ||
| 1H-9696 | [1] | SEAL-O-RING | ||
| 5F-9657 | [2] | SEAL-O-RING | ||
| 5H-6734 | [1] | SEAL-O-RING | ||
| 5P-0840 | [3] | SEAL-O-RING | ||
| 5P-4892 | [2] | SEAL-O-RING | ||
| 6V-1454 | [6] | SEAL-O-RING | ||
| 6V-3348 | [8] | SEAL-O-RING | ||
| 6V-5066 | [3] | SEAL-O-RING | ||
| 6V-6809 | [1] | SEAL-O-RING | ||
| 6V-8260 | [1] | SEAL-O-RING | ||
| 8T-2903 | [2] | SEAL-O-RING | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 235-3546 | [4] | SEAL-O-RING | ||
| 259-4598 | [6] | SEAL-O-RING | ||
| 298-6387 | [1] | SEAL-O-RING | ||
| 5R-7136 | [2] | WASHER-SEALING | ||
| 5R-7137 | [4] | WASHER-SEALING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
Information:
BASIC ENGINE
GEAR GP
Engine News
New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}
2010/01/18
2010/01/18
Special Instruction
Machining of Replacement Sleeve Bearings{1206, 1212, 1234}
Machining of Replacement Sleeve Bearings{1206, 1212, 1234}
Machining of Replacement Sleeve Bearings{1206, 1212, 1234}
Service Letter-NACD
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Specifications
Service Letter-China
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Service Letter-APD
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Disassembly and Assembly
Service Magazine
Caterpillar Parts SIS Catalog 3512 :
Truck sale:
230,416
230,416
238,453
178,974
178,974