AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

185-5863 CARTRIDGE GP-TURBOCHARGER S/N 50Y1305-1906 PART OF 289-0379 TURBOCHARGER GP 3512 MARINE ENGINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
LINES GP-EXHAUST

MARINE ENGINE 3512 MARINE ENGINE 50Y
 3512 Marine Engine 50Y01305-UP SEBP2959 3512 50Y   (1980)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
CARTRIDGE GP-TURBOCHARGER
180-3943 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
180-5445 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
185-5863 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
4W-1225 CARTRIDGE GP-TURBOCHARGER
509-1015 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
528-8391 CARTRIDGE GP-TURBOCHARGER
 

#SEBP29590460
 

185-5863: CARTRIDGE GP-TURBOCHARGER

185-5863 CARTRIDGE GP-TURBOCHARGER
S/N 50Y1305-1906
PART OF 289-0379 TURBOCHARGER GP
i07074614 SEBP2959
1855863 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 461-3707 [1] SEAL-RING  
2. 127-2378 [1] SEAL-RING  
3. 461-3784 [2] BEARING-JOURNAL  
  461-3758 AB BEARING-JOURNAL (0.25-MM US)  
  461-3763 AB BEARING-JOURNAL (0.25-MM OS, 0.25-MM US)  
  461-3768 AB BEARING-JOURNAL (0.25-MM OS)  
4. 190-0390 [1] BEARING-THRUST  
5. 461-3744 [1] COLLAR-THRUST  
6. 461-3716 [2] SEAL RING-PISTON  
7. 190-0387 [3] WASHER (WEAR)  
8. 461-3729 [3] RING-RETAINING  
9. 190-0392 [4] BOLT (3/8-16X1.2-IN)  
10. 203-9203 M [3] SCREW (M5X0.8-THD)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP29590461
 

4W-1225: CARTRIDGE GP-TURBOCHARGER

4W-1225 CARTRIDGE GP-TURBOCHARGER
PART OF 4W-1232 TURBOCHARGER GP
AN ATTACHMENT
i00378592 SEBP2959
4W1225 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3411 J [1] LOCKNUT-TURBOCHARGER (7/16-20-THD)  
2. 1N-3505 [1] SPACER-THRUST  
3. 9M-8919 J [2] RING-SEAL  
4. 1N-3383 [1] PLATE AS-BACKING  
5. 1N-3557 J [1] RING-SEAL  
6. 4W-1224 [1] HOUSING AS-BEARING  
  4M-6646 [2] PIN-GROOVED  
7. 4W-1222 J [1] RING-PISTON  
8. 4W-1329 [1] SHROUD  
9. 4W-1223 [1] SHAFT AS-TURBINE  
10. 5P-7234 J [3] RING-RETAINING  
11. 1N-3712 J [1] BEARING-THRUST  
12. 1N-3365 [1] COLLAR-THRUST  
13. 2J-3118 [4] BOLT-LOCKING (3/8-16X1.25-IN)  
14. 1N-3562 [1] WHEEL-COMPRESSOR  
   
    AVAILABLE REPAIR KIT(S):
  1N-3593 [1] KIT-BEARING (STANDARD)(STANDARD)  
  4W-4832 AB [1] KIT-BEARING (0.25-MM OS)  
  4W-4833 AB [1] KIT-BEARING (0.25-MM US)  
  4W-4834 AB [1] KIT-BEARING (0.25-MM OS, 0.25-MM US)  
  7W-4874 J [1] KIT-CARTRIDGE (TURBOCHARGER)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KIT MARKED J INCLUDES PART(S) MARKED J
 

#SEBP29590462
 

509-1015: CARTRIDGE GP-TURBOCHARGER

509-1015 CARTRIDGE GP-TURBOCHARGER
PART OF 509-1017 TURBOCHARGER GP
i07177312 SEBP2959
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  461-3783 [2] BEARING-JOURNAL  
  509-1011 [2] BEARING-JOURNAL (0.25-MM US)  
  509-1012 [2] BEARING-JOURNAL (0.25-MM OS)  
  509-1013 [2] BEARING-JOURNAL (0.25-MM OS, 0.25-MM US)  
  520-4152 [2] BEARING-JOURNAL (STANDARD)  
  520-4153 [2] BEARING-JOURNAL (0.51-MM OS)  
  520-4154 [2] BEARING-JOURNAL (0.25-MM US, 0.51-MM OS)  
  190-0390 [1] BEARING-THRUST  
  326-6485 [4] BOLT-FLANGE HEAD (3/8-16X1.25-IN)  
  461-3744 [1] COLLAR-THRUST  
  5P-7234 [3] RING-RETAINING  
  203-9203 M [3] SCREW (M5X0.8-THD)  
  461-3716 [1] SEAL RING-PISTON  
  127-2378 [1] SEAL-RING  
  461-3707 [1] SEAL-RING  
  190-0387 [2] WASHER (WEAR)  
  M   METRIC PART
 

#SEBP29590463
 

528-8391: CARTRIDGE GP-TURBOCHARGER

528-8391 CARTRIDGE GP-TURBOCHARGER
PART OF 528-8390 TURBOCHARGER GP
i07436302 SEBP2959
5288391 CARTRIDGE GP-TURBOCHARGER Parts scheme 5288391 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 519-5593 [1] BEARING-JOURNAL  
2. 481-8103 [1] PIN  
3. 190-0390 [1] BEARING-THRUST  
4. 326-6485 [4] BOLT-FLANGE HEAD (3/8-16X1.25-IN)  
5. 203-9203 M [3] SCREW (M5X0.8-THD)  
6. 332-8945 [1] PLUG (M10X1X8-MM)  
7. 332-8946 [1] WASHER (10.4X13.3X1.2-MM THK)  
8. 461-3707 [1] SEAL-RING  
9. 461-3716 [1] SEAL RING-PISTON  
10. 461-3724 [1] SEAL RING-PISTON  
11. 461-3744 [1] COLLAR-THRUST  
  M   METRIC PART
 

#SEBP29590464
 

528-9755: CARTRIDGE GP-TURBOCHARGER

528-9755 CARTRIDGE GP-TURBOCHARGER
PART OF 519-8019 TURBOCHARGER GP
i07191980 SEBP2959
5289755 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 519-5593 [1] BEARING-JOURNAL  
2. 481-8103 [1] PIN  
3. 190-0390 [1] BEARING-THRUST  
4. 326-6485 [4] BOLT-FLANGE HEAD (3/8-16X1.25-IN)  
5. 203-9203 M [3] SCREW (M5X0.8-THD)  
6. 332-8945 [1] PLUG  
7. 332-8946 [1] WASHER (10.4X13.3X1.2-MM THK)  
8. 461-3707 [1] SEAL-RING  
9. 461-3716 [1] SEAL RING-PISTON  
10. 461-3724 [1] SEAL RING-PISTON  
11. 461-3744 [1] COLLAR-THRUST  
  M   METRIC PART
 

#SEBP29590465
 

8N-8487: ELBOW GP-EXHAUST

8N-8487 ELBOW GP-EXHAUST
FOR USE WITH AIR STARTING MOTOR
AN ATTACHMENT
i00415396 SEBP2959
8N8487 ELBOW GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4566 [2] BOLT (1/2-13X3.5-IN)  
2. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 1D-4569 [2] BOLT (1/2-13X4.25-IN)  
4. 6N-4857 [1] FITTING  
5. 8N-8447 [1] ELBOW  
6. 8N-8452 [1] GASKET  
7. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
 

#SEBP29590466
 

5L-6954: ELBOW-EXHAUST

5L-6954 ELBOW-EXHAUST
12-IN
AN ATTACHMENT
i00925588 SEBP2959
5L6954 ELBOW-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP29590467
 

5N-2458: ELBOW-EXHAUST

5N-2458 ELBOW-EXHAUST
10-IN
AN ATTACHMENT
i00553561 SEBP2959
5N2458 ELBOW-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP29590468
 

1W-9487: FITTING GP-EXHAUST

1W-9487 FITTING GP-EXHAUST
355.6-MM
AN ATTACHMENT
i00354418 SEBP2959
1W9487 FITTING GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-7996 [1] ADAPTER  
2. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
3. 0S-1591 [12] BOLT (3/8-16X1.5-IN)  
4. 9S-8752 [12] NUT-FULL (3/8-16-THD)  
5. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 1W-6356 [1] GASKET  
 

#SEBP29590469
 

5N-2457: FITTING GP-EXHAUST

5N-2457 FITTING GP-EXHAUST -FLEXIBLE
203.2-MM
AN ATTACHMENT
i00384675 SEBP2959
5N2457 FITTING GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 214-6045 [1] BELLOWS AS  
2. 245-3512 [1] GASKET (EXHAUST)  
3. 3V-3308 [8] WASHER-HARD (10.2X20.5X2.5-MM THK)  
4. 0S-1588 BL [8] BOLT (3/8-16X1.25-IN)  
5. 0S-1571 BJ [8] BOLT (3/8-16X1.75-IN)  
6. 9S-8752 BJ [8] NUT-FULL (3/8-16-THD)  
  B   USE AS REQUIRED
  J   FOR USE WITH HOT EXHAUST
  L   FOR USE WITH WATER COOLED EXHAUST
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Dry Exhaust Elbow and Improved Turbocharger Exhaust Seal Help Prevent Exhaust Gas Leakage
1984/01/18
O-Ring Seal Not Needed On Turbochargers
1985/10/01
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Bellows-Type Exhaust Seals Used On Water Cooled Turbochargers
1988/09/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections
1989/12/01
New Bolt Improves Retention Of Backplate To Housing Assembly In Turbocharger Cartridge Groups
1991/04/01
"Off-Size" Bearing Kits Available
1991/10/01
New Exhaust Bellows Used In Turbocharger Group
1992/06/01
New Bellows Assemblies Used In Turbocharger Groups
1992/12/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
New Turbocharger Groups And New Turbocharger Cartridge Groups Have Improved Thrust Bearing And Turbine Ring Seal{1052,1053}
1994/02/01
Water Cooled Turbine Housings May Require Larger Core Plugs{1065,1050}
1994/11/01
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
Slip In Coupling Used Instead Of Bellows Assembly In Turbocharger Group To Improve Serviceability{1061,1065}
1996/02/16
New Adapters In Turbocharger Groups Provide Improved Sealing Between The Turbocharger And Exhaust Elbow{1061,1065}
1997/03/01
New Support Assembly (Turbocharger) Added {1059}
1998/01/20
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
New Gasket for the Turbocharger's Water Lines {1052, 1380}
2003/11/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
New Gasket for the Turbocharger Oil Line {1052, 1307}
2004/08/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30
Hole in the Turbine Housing of the Turbocharger {1052}
2006/06/26
Packaging the Turbocharger {1052}
2007/02/26
A New Torque Specification Is Used for the V-Band Clamp of Turbochargers on Certain 3500 and C175-16 Engines {1052, 7553}
2012/02/01
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
A New Dowel Is Now Used For The Turbocharger Drain On Certain 3512C Locomotive Engines {1052, 1053}
A New Dowel Is Now Used For The Turbocharger Drain On Certain 3512C Locomotive Engines {1052, 1053}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
7W4874 Turbocharger Cartridge Repair Kit{1053}
7W4874 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Modifying the Turbocharger Group on Certain 3500 Marine Engines and 797 and 797B Off-Highway Trucks{1052, 1053}
Modifying the Turbocharger Group on Certain 3500 Marine Engines and 797 and 797B Off-Highway Trucks{1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger Impeller Installation
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV72 &amp; TW72) (TV78 &amp; TW78)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (TV92 &amp; TW92)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbochargers<BR> (C153 &amp; W153)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Turbocharger
3500 Marine Engines
Turbocharger
3500 Marine Engines
Systems Operation
Turbocharger
3500 Marine Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Turbochargers (TW81, TW91)
3508, 3512 & 3516 MARINE ENGINES
Turbocharger (W153)
3508, 3512 & 3516 MARINE ENGINES
Turbochargers (TW81)
3508, 3512 & 3516 MARINE ENGINES
Turbochargers (TW91)
3508, 3512 & 3516 MARINE ENGINES
Turbochargers (W153)
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Dry Exhaust Elbow and Improved Turbocharger Exhaust Seal Help Prevent Exhaust Gas Leakage{1052,1061}
1983/12/12
Water Cooled Exhaust Elbow Groups Available{1052,1061}
1985/06/03
O-Ring Seal Not Needed On Turbochargers{1052}
1985/10/07
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Bellows-Type Exhaust Seals Used On Water Cooled Turbochargers{1059,1070}
1988/09/19
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections{1059,1070}
1989/11/27
New Bolt Improves Retention Of Backplate To Housing Assembly In Turbocharger Cartridge Groups{1052,1053,1056,7553}
1991/04/08
New Exhaust Bellows Used In Turbocharger Group{1052}
1992/06/15
New Bellows Assemblies Used In Turbocharger Groups{1052,1059}
1992/12/21
New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
New Turbocharger Groups And New Turbocharger Cartridge Groups Have Improved Thrust Bearing And Turbine Ring Seal{1052,1053}
1994/02/07
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3512 :

CARTRIDGE GP-TURBOCHARGER
180-5445 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
180-3943 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
125-2061 CARTRIDGE GP-TURBOCHARGER
100-4095 CARTRIDGE GP-TURBOCHARGER
AIR CLEANER GP
8N-9303 AIR CLEANER GP
AIR CLEANER GP
8N-3378 AIR CLEANER GP
AIR CLEANER GP
5N-7822 AIR CLEANER GP
199-5598 AIR CLEANER GP
CARTRIDGE GP-TURBOCHARGER
4W-1225 CARTRIDGE GP-TURBOCHARGER
509-1015 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
528-8391 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
528-9755 CARTRIDGE GP-TURBOCHARGER
ELBOW GP-EXHAUST
8N-8487 ELBOW GP-EXHAUST
ELBOW-EXHAUST
5L-6954 ELBOW-EXHAUST
ELBOW-EXHAUST
5N-2458 ELBOW-EXHAUST
FITTING GP-EXHAUST
1W-9487 FITTING GP-EXHAUST

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.