AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3516 Marine Engine 29Z01120-UP BASIC ENGINE Caterpillar SIS



MARINE ENGINE 3516 MARINE ENGINE 29Z
 3516 Marine Engine 29Z01120-UP SEBP2961 3516 29Z   (1982)

Parts group 3516:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
AIR COMPRESSOR GP
122-8966 AIR COMPRESSOR GP
122-8966 AIR COMPRESSOR GP
S/N 29Z1463-UP
PART OF 8N-8360 AIR COMPRESSOR GP
FIELD REPLACEMENT ORDER @@@@@126-6110@@@@@
AN ATTACHMENT
AIR COMPRESSOR GP
126-6110 AIR COMPRESSOR GP
126-6110 AIR COMPRESSOR GP
FIELD REPLACEMENT FOR @@@@@122-8966@@@@@
AN ATTACHMENT
AIR COMPRESSOR GP
144-0742 AIR COMPRESSOR GP
144-0742 AIR COMPRESSOR GP
S/N 29Z1120-1462
PART OF 8N-8360 AIR COMPRESSOR GP
AN ATTACHMENT
AIR COMPRESSOR GP
1W-8495 AIR COMPRESSOR GP
1W-8495 AIR COMPRESSOR GP
PART OF 8N-8360 AIR COMPRESSOR GP
AN ATTACHMENT
AIR COMPRESSOR GP
8N-8360 AIR COMPRESSOR GP
8N-8360 AIR COMPRESSOR GP
12 CU. FT./MIN. BELT DRIVEN
FOR USE WITH UPPER LH ACCESSORY DRIVE
FOR USAGE REFER TO CHART @@@@@ 8N-7500@@@@@
AN ATTACHMENT
AIR COMPRESSOR GP
8N-8360 AIR COMPRESSOR GP
8N-8360 AIR COMPRESSOR GP
S/N 29Z1120-1462
12 CU. FT./MIN. BELT DRIVEN
FOR USE WITH UPPER LH ACCESSORY DRIVE
FOR USAGE REFER TO CHART @@@@@ 8N-7500@@@@@
AN ATTACHMENT
AIR COMPRESSOR GP
8N-8360 AIR COMPRESSOR GP
8N-8360 AIR COMPRESSOR GP
S/N 29Z1463-UP
12 CU. FT./MIN. BELT DRIVEN
FOR USE WITH UPPER LH ACCESSORY DRIVE
FOR USAGE REFER TO CHART @@@@@ 8N-7500@@@@@
AN ATTACHMENT
BARRING GP
BARRING GP
253-2468 BARRING GP
253-2468 BARRING GP -RH
AN ATTACHMENT
BARRING GP
5R-7425 BARRING GP
5R-7425 BARRING GP -LH
AN ATTACHMENT
CAMSHAFT GP
CAMSHAFT GP
7W-1259 CAMSHAFT GP
7W-1259 CAMSHAFT GP
S/N 29Z1120-1171
CAMSHAFT GP
7W-1259 CAMSHAFT GP
7W-1259 CAMSHAFT GP
S/N 29Z1172-1354
CAMSHAFT GP
7W-1259 CAMSHAFT GP
7W-1259 CAMSHAFT GP
S/N 29Z1355-UP
COVER GP-CAMSHAFT
155-2564 COVER GP-CAMSHAFT
155-2564 COVER GP-CAMSHAFT
CHROME PLATED
AN ATTACHMENT
COVER GP-CAMSHAFT
155-2583 COVER GP-CAMSHAFT
155-2583 COVER GP-CAMSHAFT
CHROME PLATED
AN ATTACHMENT
CLUTCH GP
CLUTCH AS
3N-4128 CLUTCH AS
3N-4128 CLUTCH AS
PART OF 3N-4130 CLUTCH GP
AN ATTACHMENT
CLUTCH GP
3N-4130 CLUTCH GP
3N-4130 CLUTCH GP
PART OF 7W-0281, 7W-0282 POWER TAKE-OFF GP
AN ATTACHMENT
COUPLING GP
COUPLING GP-TORSIONAL
7C-8464 COUPLING GP-TORSIONAL
7C-8464 COUPLING GP-TORSIONAL
AN ATTACHMENT
COUPLING GP-TORSIONAL
9Y-2163 COUPLING GP-TORSIONAL
9Y-2163 COUPLING GP-TORSIONAL
AN ATTACHMENT
COUPLING GP-TORSIONAL
9Y-2164 COUPLING GP-TORSIONAL
9Y-2164 COUPLING GP-TORSIONAL
AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT AS
448-8940 CRANKSHAFT AS
448-8940 CRANKSHAFT AS
S/N 29Z1359-UP
PART OF 8N-0337 CRANKSHAFT GP
CRANKSHAFT GP
359-0939 CRANKSHAFT GP
359-0939 CRANKSHAFT GP
AN ATTACHMENT
CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
S/N 29Z1120-1358
CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
S/N 29Z1359-UP
SEAL GP-CRANKSHAFT
7W-3813 SEAL GP-CRANKSHAFT
7W-3813 SEAL GP-CRANKSHAFT
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
155-2563 COVER GP-CYLINDER BLOCK
155-2563 COVER GP-CYLINDER BLOCK -CRANKCASE
CHROME PLATED
AN ATTACHMENT
COVER GP-CYLINDER BLOCK
8N-0342 COVER GP-CYLINDER BLOCK
8N-0342 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK AS
101-1173 CYLINDER BLOCK AS
101-1173 CYLINDER BLOCK AS
S/N 29Z1120-1462
PART OF 115-5155, 115-5156, 240-6652 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@115-5160@@@@@
CYLINDER BLOCK AS
106-2780 CYLINDER BLOCK AS
106-2780 CYLINDER BLOCK AS
PART OF 115-5160 CYLINDER BLOCK GP
CYLINDER BLOCK AS
350-1393 CYLINDER BLOCK AS
350-1393 CYLINDER BLOCK AS
S/N 29Z1463-UP
PART OF 353-3971 CYLINDER BLOCK GP
CYLINDER BLOCK AS
350-1417 CYLINDER BLOCK AS
350-1417 CYLINDER BLOCK AS
S/N 29Z1463-UP
PART OF 240-6652 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@353-3971@@@@@, 48- 7N-2046 SEAL-O-RING, 16-211-7826 LINER-CYLINDER BLOCK, 16-352-6061 SEAL-LINER
CYLINDER BLOCK GP
115-5155 CYLINDER BLOCK GP
115-5155 CYLINDER BLOCK GP
CYLINDER BLOCK GP
115-5156 CYLINDER BLOCK GP
115-5156 CYLINDER BLOCK GP
S/N 29Z1219-1354
CYLINDER BLOCK GP
115-5156 CYLINDER BLOCK GP
115-5156 CYLINDER BLOCK GP
S/N 29Z1355-1388
CYLINDER BLOCK GP
115-5160 CYLINDER BLOCK GP
115-5160 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@101-1173@@@@@
CYLINDER BLOCK GP
240-6652 CYLINDER BLOCK GP
240-6652 CYLINDER BLOCK GP
S/N 29Z1389-1462
CYLINDER BLOCK GP
240-6652 CYLINDER BLOCK GP
240-6652 CYLINDER BLOCK GP
S/N 29Z1463-UP
CYLINDER BLOCK GP
353-3971 CYLINDER BLOCK GP
353-3971 CYLINDER BLOCK GP
S/N 29Z1463-UP
FIELD REPLACEMENT FOR @@@@@350-1417@@@@@
FOR USE WITH 339-4950 SEAL-LINER, 8N-4707 BAND-FILLER
LINER-CYLINDER BLOCK
123-8206 LINER-CYLINDER BLOCK
123-8206 LINER-CYLINDER BLOCK
FOR USE WITH CYLINDER BLOCKS WHEN A WEAR STEP EXISTS AND REDECKING IS NOT AN OPTION
FIELD INSTALLATION
SEAL AS-WATER
105-4656 SEAL AS-WATER
105-4656 SEAL AS-WATER
PROVIDES A POSITIVE WATER SEAL IN THE HEAD TO BLOCK JOINT
FIELD INSTALLATION
SEAL AS-WATER
105-4657 SEAL AS-WATER
105-4657 SEAL AS-WATER
PROVIDES A POSITIVE WATER SEAL IN THE HEAD TO BLOCK JOINT
FIELD INSTALLATION
VALVE GP-EXPLOSION RELIEF
155-2567 VALVE GP-EXPLOSION RELIEF
155-2567 VALVE GP-EXPLOSION RELIEF
CRANKCASE, CHROME
AN ATTACHMENT
VALVE GP-EXPLOSION RELIEF
155-2586 VALVE GP-EXPLOSION RELIEF
155-2586 VALVE GP-EXPLOSION RELIEF -CRANKCASE
CHROME PLATED
AN ATTACHMENT
VALVE GP-EXPLOSION RELIEF
8N-8510 VALVE GP-EXPLOSION RELIEF
8N-8510 VALVE GP-EXPLOSION RELIEF -CRANKCASE
AN ATTACHMENT
INSERT-LINER SEAT
7W-5949 INSERT-LINER SEAT
7W-5949 INSERT-LINER SEAT
FIELD INSTALLATION
CYLINDER HEAD GP
CYLINDER HEAD AS
131-0410 CYLINDER HEAD AS
131-0410 CYLINDER HEAD AS
S/N 29Z1212-UP
PART OF 131-0424, 156-9140 CYLINDER HEAD AS, 4W-9560 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@131-0424@@@@@, @@@@@156-9140@@@@@, @@@@@172-0839@@@@@
CYLINDER HEAD AS
131-0424 CYLINDER HEAD AS
131-0424 CYLINDER HEAD AS
FIELD REPLACEMENT FOR 131-0410 CYLINDER HEAD AS
CYLINDER HEAD AS
156-9140 CYLINDER HEAD AS
156-9140 CYLINDER HEAD AS
S/N 29Z1120-1341
FIELD REPLACEMENT FOR @@@@@131-0410@@@@@
CYLINDER HEAD AS
172-0834 CYLINDER HEAD AS
172-0834 CYLINDER HEAD AS
S/N 29Z1342-UP
PART OF 242-5327 CYLINDER HEAD AS, 172-0835, 239-0690, 335-6218 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@172-0839@@@@@, @@@@@242-5327@@@@@
CYLINDER HEAD AS
172-0839 CYLINDER HEAD AS
172-0839 CYLINDER HEAD AS
S/N 29Z1342-UP
FIELD REPLACEMENT FOR @@@@@131-0410@@@@@, @@@@@172-0834@@@@@
CYLINDER HEAD AS
242-5327 CYLINDER HEAD AS
242-5327 CYLINDER HEAD AS
S/N 29Z1342-UP
FIELD REPLACEMENT FOR @@@@@172-0834@@@@@
CYLINDER HEAD AS
290-1351 CYLINDER HEAD AS
290-1351 CYLINDER HEAD AS
PART OF 335-6220 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@299-3519@@@@@
CYLINDER HEAD AS
299-3519 CYLINDER HEAD AS
299-3519 CYLINDER HEAD AS
FIELD REPLACEMENT FOR @@@@@290-1351@@@@@
CYLINDER HEAD AS
7E-5859 CYLINDER HEAD AS
7E-5859 CYLINDER HEAD AS
FIELD REPLACEMENT FOR @@@@@ 7E-5861@@@@@
CYLINDER HEAD AS
7E-5861 CYLINDER HEAD AS
7E-5861 CYLINDER HEAD AS
S/N 29Z1120-1211
PART OF 4W-9560 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7E-5859@@@@@
CYLINDER HEAD GP
172-0835 CYLINDER HEAD GP
172-0835 CYLINDER HEAD GP
S/N 29Z1342-UP
PART OF 4W-0095 CYLINDER HEAD GP
CYLINDER HEAD GP
239-0690 CYLINDER HEAD GP
239-0690 CYLINDER HEAD GP
S/N 29Z1389-UP
PART OF 4W-0095 CYLINDER HEAD GP
CYLINDER HEAD GP
335-6218 CYLINDER HEAD GP
335-6218 CYLINDER HEAD GP
S/N 29Z1463-UP
PART OF 4W-0095 CYLINDER HEAD GP
FOR USE WITH @@@@@452-9918@@@@@
CYLINDER HEAD GP
335-6220 CYLINDER HEAD GP
335-6220 CYLINDER HEAD GP
PART OF 357-1810 KIT-ENGINE CONVERSION
CYLINDER HEAD GP
4W-0095 CYLINDER HEAD GP
4W-0095 CYLINDER HEAD GP
S/N 29Z1120-1174
CYLINDER HEAD GP
4W-0095 CYLINDER HEAD GP
4W-0095 CYLINDER HEAD GP
S/N 29Z1175-1341
CYLINDER HEAD GP
4W-0095 CYLINDER HEAD GP
4W-0095 CYLINDER HEAD GP
S/N 29Z1342-1388
CYLINDER HEAD GP
4W-0095 CYLINDER HEAD GP
4W-0095 CYLINDER HEAD GP
S/N 29Z1389-1462
CYLINDER HEAD GP
4W-0095 CYLINDER HEAD GP
4W-0095 CYLINDER HEAD GP
S/N 29Z1463-UP
CYLINDER HEAD GP
4W-9560 CYLINDER HEAD GP
4W-9560 CYLINDER HEAD GP
S/N 29Z1120-1211
PART OF 4W-0095 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-9560 CYLINDER HEAD GP
4W-9560 CYLINDER HEAD GP
S/N 29Z1212-UP
PART OF 4W-0095 CYLINDER HEAD GP
452-9918 KIT-CYLINDER HEAD
452-9918 KIT-CYLINDER HEAD -SINGLE CYLINDER HEAD
FOR USE WITH @@@@@335-6218@@@@@
FIELD INSTALLATION
553-4180 KIT-CYLINDER HEAD
553-4180 KIT-CYLINDER HEAD
SINGLE CYLINDER HEAD OVERHAUL KIT
FOR USE WITH @@@@@335-6218@@@@@
FIELD INSTALLATION
355-0769 KIT-CYLINDER HEAD GASKET
355-0769 KIT-CYLINDER HEAD GASKET
PROVIDE A STANDARDIZED 3500 SINGLE CYLINDER HEAD KIT FOR MUI APPLICATIONS WITH STANDARD EXHAUST 320-8974 GASKET, AND INTAKE AIR LINE GASKETS 7N-5089. THIS KIT DOES NOT CONTAIN INJECTOR SEALS, BREATHER SEALS, VALVE STEM SEALS, OR ROCKER ARM BUTTON SEALS. ORDER AS NEEDED
FOR USE WITH GS055- MACHINE S/N CAL1-UP, GS056- MACHINE S/N FDR1-UP, E258- ENGINE S/N 95Y1-UP, ENGINE ARRANGEMENTS: 143-5189, 4W-0280, 7N-8704, 8N-5810, E260- ENGINE S/N 97Y1-UP, E261- ENGINE S/N 49Y1-UP, ENGINE ARRANGEMENTS: 4W-0282, 8N-5805, E263- ENGINE S/N 51Y-UP, ENGINE ARRANGEMENTS: 2W-8863, 8N-5803, E264- ENGINE S/N 27Z1-UP, ENGINE ARRANGEMENTS: 8N-0461, 4W-0284, 135-4467, 135-4468, E265- ENGINE S/N 29Z1-UP, ENGINE ARRANGEMENTS: 2W-8864, 8N-0464, 8N-5813, E266- ENGINE S/N 28Z1-UP, ENGINE ARRANGEMENTS: 2W-8865, 8N-0465, E273- ENGINE S/N 23Z1-UP, ENGINE ARRANGEMENTS: 2W-8046, 7C-1299, 7C-4594, 7N-8701, E274- ENGINE S/N 24Z1-UP, ENGINE ARRANGEMENTS: 2W-8405, 7C-1300, 7C-5185, 8N-5806, E275- ENGINE S/N 25Z1-UP, ENGINE ARRANGEMENTS: 107-7346, 107-7350, 2W-8404, 4P-4444, 6I-2939, 7C-1301, 7C-5186, 8N-0462, 8N-0463, E301- ENGINE S/N 68Z1-UP, ENGINE ARRANGEMENTS: 1W-4210, 1W-4214, 4W-0281, E303- ENGINE S/N 70Z1-UP, ENGINE ARRANGEMENTS: 1W-4211, 2W-8867, E304- ENGINE S/N 65Z1-UP, ENGINE ARRANGEMENTS: 1W-4216, 4W-0283, E305- ENGINE S/N 71Z1-UP, E306- ENGINE S/N 67Z1-UP, E307- ENGINE S/N 71Z1-UP, E308- ENGINE S/N 72Z1-UP, ENGINE ARRANGEMENTS: 1W-4225, 1W-4227, 2W-8870, E309- ENGINE S/N 73Z1-UP, ENGINE ARRANGEMENTS: 1W-4223, 1W-4224, 2W-8871, E387- ENGINE S/N 2WK1-77, E390- ENGINE S/N 6TJ1-13, RM388- ENGINE S/N 99W1-UP, MACHINE S/N 6JC1-UP, RM389- ENGINE S/N 99W1-UP, MACHINE S/N 4YC1-UP, RM413- ENGINE S/N 96Z1-UP, MACHINE S/N 8GB1-UP, RM415- ENGINE S/N 54Z1-UP, MACHINE S/N 9ZC1-UP, T403- ENGINE S/N 99W1-UP, MACHINE S/N 74Z1-UP, T534- ENGINE S/N 54Z1-UP, MACHINE S/N 9YF1-UP
FIELD INSTALLATION
SEAL AS-WATER
105-4656 SEAL AS-WATER
105-4656 SEAL AS-WATER
PROVIDES A POSITIVE WATER SEAL IN THE HEAD TO BLOCK JOINT
FIELD INSTALLATION
SEAL AS-WATER
105-4657 SEAL AS-WATER
105-4657 SEAL AS-WATER
PROVIDES A POSITIVE WATER SEAL IN THE HEAD TO BLOCK JOINT
FIELD INSTALLATION
DAMPER GP
100-4324 DAMPER GP
100-4324 DAMPER GP
PART OF 108-1290, 8N-0339 DAMPER GP
AN ATTACHMENT
100-4325 DAMPER GP
100-4325 DAMPER GP
PART OF 7W-0284 MOUNTING GP-HYD PUMP DRIVE, 7W-0282 POWER TAKE-OFF GP
AN ATTACHMENT
DAMPER GP
108-1290 DAMPER GP
108-1290 DAMPER GP
FOR USE WITH FRONT TRUNNION
AN ATTACHMENT
DAMPER GP
146-3740 DAMPER GP
146-3740 DAMPER GP
S/N 29Z1359-UP
PART OF 8N-0339 DAMPER GP
ALSO AN ATTACHMENT
DAMPER GP
171-4571 DAMPER GP
171-4571 DAMPER GP
PART OF 7W-0284 MOUNTING GP-HYD PUMP DRIVE, 7W-0282 POWER TAKE-OFF GP
AN ATTACHMENT
DAMPER GP
4W-0278 DAMPER GP
4W-0278 DAMPER GP
AN ATTACHMENT
DAMPER GP
6I-3697 DAMPER GP
6I-3697 DAMPER GP
PART OF 100-4324 DAMPER GP
AN ATTACHMENT
DAMPER GP
6I-3699 DAMPER GP
6I-3699 DAMPER GP
PART OF 100-4325 DAMPER GP
FIELD REPLACEMENT ORDER @@@@@171-4571@@@@@
AN ATTACHMENT
DAMPER GP
7C-9639 DAMPER GP
7C-9639 DAMPER GP
PART OF 100-4325 DAMPER GP
FIELD REPLACEMENT ORDER @@@@@171-4571@@@@@
AN ATTACHMENT
DAMPER GP
7C-9641 DAMPER GP
7C-9641 DAMPER GP
PART OF 100-4324 DAMPER GP
AN ATTACHMENT
DAMPER GP
8N-0339 DAMPER GP
8N-0339 DAMPER GP
AN ATTACHMENT
DAMPER GP
8N-0339 DAMPER GP
8N-0339 DAMPER GP
S/N 29Z1359-UP
ALSO AN ATTACHMENT
DAMPER GP
8N-7182 DAMPER GP
8N-7182 DAMPER GP
S/N 29Z1120-1358
FASTENER GP-DAMPER
369-9244 FASTENER GP-DAMPER
369-9244 FASTENER GP-DAMPER
AN ATTACHMENT
GUARD GP-DAMPER
6I-3143 GUARD GP-DAMPER
6I-3143 GUARD GP-DAMPER
FOR USE WITH SINGLE SIDED FRONT HOUSING AND FRONT POWER TAKE-OFF
AN ATTACHMENT
GUARD GP-DAMPER
8N-9639 GUARD GP-DAMPER
8N-9639 GUARD GP-DAMPER
S/N 29Z1120-1462
FOR USE WITH FRONT ACCESSORY DRIVE HOUSING
AN ATTACHMENT
GUARD GP-DAMPER
8N-9639 GUARD GP-DAMPER
8N-9639 GUARD GP-DAMPER
S/N 29Z1463-UP
FOR USE WITH FRONT ACCESSORY DRIVE HOUSING
AN ATTACHMENT
DRIVE GP-ACCESSORY
COVER GP-ACCESSORY DRIVE
8N-4263 COVER GP-ACCESSORY DRIVE
8N-4263 COVER GP-ACCESSORY DRIVE -RH
PART OF 1W-5021, 2W-8583 GOVERNOR GP
AN ATTACHMENT
COVER GP-ACCESSORY DRIVE
8N-4266 COVER GP-ACCESSORY DRIVE
8N-4266 COVER GP-ACCESSORY DRIVE -RH
PART OF 7W-3333 GOVERNOR GP
AN ATTACHMENT
DRIVE GP-ACCESSORY
4W-6882 DRIVE GP-ACCESSORY
4W-6882 DRIVE GP-ACCESSORY
PART OF 7W-7325 SHUTOFF GP-ELECTRICAL
FOR USE WITH HIGH SPEED, HYDRAMECHANICAL SHUTOFF
FOR USAGE REFER TO CHART @@@@@ 7W-7326@@@@@
AN ATTACHMENT
DRIVE GP-ACCESSORY
7N-4871 DRIVE GP-ACCESSORY
7N-4871 DRIVE GP-ACCESSORY -UPPER, RH
FOR USE WITH 900-1800 RPM
CANNOT BE USED WITH RIGHT HAND GOVERNOR
ALSO AN ATTACHMENT
DRIVE GP-ACCESSORY
8N-5743 DRIVE GP-ACCESSORY
8N-5743 DRIVE GP-ACCESSORY -UPPER, LH
REVERSE ROTATION
Type 1
CANNOT BE USED WITH @@@@@ 7W-1530@@@@@
FOR USAGE REFER TO CHART @@@@@ 8N-7500@@@@@
AN ATTACHMENT
DRIVE GP-ACCESSORY
8N-5743 DRIVE GP-ACCESSORY
8N-5743 DRIVE GP-ACCESSORY -UPPER, LH
REVERSE ROTATION
Type 2
CANNOT BE USED WITH @@@@@ 7W-1530@@@@@
FOR USAGE REFER TO CHART @@@@@ 8N-7500@@@@@
AN ATTACHMENT
DRIVE GP-ACCESSORY
8N-5767 DRIVE GP-ACCESSORY
8N-5767 DRIVE GP-ACCESSORY -LOWER, LH
REVERSE ROTATION
FOR USE WITH @@@@@ 8N-5743@@@@@
CANNOT BE USED WITH @@@@@ 7W-1530@@@@@
FOR USAGE REFER TO CHART @@@@@ 8N-7500@@@@@
AN ATTACHMENT
DRIVE GP-ACCESSORY
8N-9166 DRIVE GP-ACCESSORY
8N-9166 DRIVE GP-ACCESSORY -UPPER, LH
STANDARD ROTATION
FOR USAGE REFER TO CHART @@@@@ 8N-7500@@@@@
AN ATTACHMENT
DRIVE GP-ACCESSORY
8N-9167 DRIVE GP-ACCESSORY
8N-9167 DRIVE GP-ACCESSORY -LOWER, LH
STANDARD ROTATION
Type 1
FOR USAGE REFER TO CHART @@@@@ 8N-7500@@@@@
AN ATTACHMENT
DRIVE GP-ACCESSORY
8N-9167 DRIVE GP-ACCESSORY
8N-9167 DRIVE GP-ACCESSORY -LOWER, LH
STANDARD ROTATION
Type 2
FOR USAGE REFER TO CHART @@@@@ 8N-7500@@@@@
AN ATTACHMENT
DRIVE GP-AUXILIARY
SHAFT GP-AUXILIARY DRIVE
209-3559 SHAFT GP-AUXILIARY DRIVE
209-3559 SHAFT GP-AUXILIARY DRIVE -UPPER FRONT, RH
AN ATTACHMENT
SHAFT GP-AUXILIARY DRIVE
209-3560 SHAFT GP-AUXILIARY DRIVE
209-3560 SHAFT GP-AUXILIARY DRIVE -UPPER REAR, LH
AN ATTACHMENT
SHAFT GP-AUXILIARY DRIVE
209-3561 SHAFT GP-AUXILIARY DRIVE
209-3561 SHAFT GP-AUXILIARY DRIVE -LOWER REAR, LH
AN ATTACHMENT
SHAFT GP-AUXILIARY DRIVE
209-3562 SHAFT GP-AUXILIARY DRIVE
209-3562 SHAFT GP-AUXILIARY DRIVE -UPPER FRONT, LH
AN ATTACHMENT
SHAFT GP-AUXILIARY DRIVE
7N-8042 SHAFT GP-AUXILIARY DRIVE
7N-8042 SHAFT GP-AUXILIARY DRIVE -LOWER FRONT, LH
FOR USAGE REFER TO CHART @@@@@ 8N-7500@@@@@
AN ATTACHMENT
CHART-AUXILIARY DRIVE
8N-7500 CHART-AUXILIARY DRIVE
8N-7500 CHART-AUXILIARY DRIVE
GEARS & INSTALLATION INFORMATION
AN ATTACHMENT
DRIVE GP-FAN
DRIVE GP-FAN
7N-7660 DRIVE GP-FAN
7N-7660 DRIVE GP-FAN
LOW KILOWATT
AN ATTACHMENT
DRIVE GP-PUMP
MOUNTING GP-HYD PUMP DRIVE
7W-0283 MOUNTING GP-HYD PUMP DRIVE
7W-0283 MOUNTING GP-HYD PUMP DRIVE
CANNOT BE USED WITH ATTACHMENT DAMPER GP
AN ATTACHMENT
MOUNTING GP-HYD PUMP DRIVE
7W-0284 MOUNTING GP-HYD PUMP DRIVE
7W-0284 MOUNTING GP-HYD PUMP DRIVE
Type 1
AN ATTACHMENT
MOUNTING GP-HYD PUMP DRIVE
7W-0284 MOUNTING GP-HYD PUMP DRIVE
7W-0284 MOUNTING GP-HYD PUMP DRIVE
Type 2
AN ATTACHMENT
FLYWHEEL GP
FLYWHEEL GP
7N-4851 FLYWHEEL GP
7N-4851 FLYWHEEL GP
S/N 29Z1120-1394
FLYWHEEL GP
7N-4851 FLYWHEEL GP
7N-4851 FLYWHEEL GP
S/N 29Z1395-UP
FLYWHEEL GP
8N-6038 FLYWHEEL GP
8N-6038 FLYWHEEL GP
PART OF 4W-1547 CONVERSION AR-ENGINE
FOR USE WITH SAE REVERSE ENGINE ROTATION
AN ATTACHMENT
GEAR GP-REAR
116-9856 GEAR GP-REAR
116-9856 GEAR GP-REAR
GEAR GP
GEAR GP-FRONT
8N-5768 GEAR GP-FRONT
8N-5768 GEAR GP-FRONT -RH
REVERSE ROTATION, HIGH SPEED
PART OF 4W-1547 CONVERSION AR-ENGINE
Type 1
AN ATTACHMENT
GEAR GP-FRONT
8N-5768 GEAR GP-FRONT
8N-5768 GEAR GP-FRONT -RH
REVERSE ROTATION, HIGH SPEED
PART OF 4W-1547 CONVERSION AR-ENGINE
Type 2
AN ATTACHMENT
GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
S/N 29Z1120-1234
GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
S/N 29Z1235-UP
GEAR GP-REAR
116-9856 GEAR GP-REAR
116-9856 GEAR GP-REAR
HOUSING GP-FRONT
7W-1530 HOUSING GP-FRONT
7W-1530 HOUSING GP-FRONT
AN ATTACHMENT
HOUSING GP-FRONT
7W-3724 HOUSING GP-FRONT
7W-3724 HOUSING GP-FRONT -ACCESSORY DRIVE
GUARD GP-BELT
GUARD GP-BELT
151-9228 GUARD GP-BELT
151-9228 GUARD GP-BELT -ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
271-9270 GUARD GP-BELT
271-9270 GUARD GP-BELT -ALTERNATOR
S/N 29Z1120-1466
AN ATTACHMENT
GUARD GP-BELT
271-9270 GUARD GP-BELT
271-9270 GUARD GP-BELT -ALTERNATOR
S/N 29Z1467-UP
AN ATTACHMENT
GUARD GP-BELT
7W-5780 GUARD GP-BELT
7W-5780 GUARD GP-BELT -ALTERNATOR
S/N 29Z1120-1466
AN ATTACHMENT
GUARD GP-BELT
7W-5780 GUARD GP-BELT
7W-5780 GUARD GP-BELT -ALTERNATOR
S/N 29Z1467-UP
AN ATTACHMENT
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
4W-1529 COVER GP-FLYWHEEL HOUSING
4W-1529 COVER GP-FLYWHEEL HOUSING
HOUSING GP-FLYWHEEL
7W-3722 HOUSING GP-FLYWHEEL
7W-3722 HOUSING GP-FLYWHEEL
S/N 29Z1120-1385
FOR USE WITH SAE 00 FLYWHEEL
HOUSING GP-FLYWHEEL
7W-3722 HOUSING GP-FLYWHEEL
7W-3722 HOUSING GP-FLYWHEEL
S/N 29Z1386-1387
FOR USE WITH SAE 00 FLYWHEEL
HOUSING GP-FLYWHEEL
7W-3722 HOUSING GP-FLYWHEEL
7W-3722 HOUSING GP-FLYWHEEL
S/N 29Z1388-UP
FOR USE WITH SAE 00 FLYWHEEL
PLUG GP-FLYWHEEL HOUSING
520-7434 PLUG GP-FLYWHEEL HOUSING
520-7434 PLUG GP-FLYWHEEL HOUSING
AN ATTACHMENT
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
7W-2378 COVER GP-FRONT HOUSING
7W-2378 COVER GP-FRONT HOUSING -LH
AN ATTACHMENT
COVER GP-FRONT HOUSING
8N-9642 COVER GP-FRONT HOUSING
8N-9642 COVER GP-FRONT HOUSING
GEAR GP-FRONT
8N-5768 GEAR GP-FRONT
8N-5768 GEAR GP-FRONT -RH
REVERSE ROTATION, HIGH SPEED
PART OF 4W-1547 CONVERSION AR-ENGINE
Type 1
AN ATTACHMENT
GEAR GP-FRONT
8N-5768 GEAR GP-FRONT
8N-5768 GEAR GP-FRONT -RH
REVERSE ROTATION, HIGH SPEED
PART OF 4W-1547 CONVERSION AR-ENGINE
Type 2
AN ATTACHMENT
GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
S/N 29Z1120-1234
GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
8N-7174 GEAR GP-FRONT
S/N 29Z1235-UP
HOUSING GP-FRONT
7W-1530 HOUSING GP-FRONT
7W-1530 HOUSING GP-FRONT
AN ATTACHMENT
HOUSING GP-FRONT
7W-3724 HOUSING GP-FRONT
7W-3724 HOUSING GP-FRONT -ACCESSORY DRIVE
LIFTING GP-ENGINE
LIFTING GP-ENGINE
8N-7734 LIFTING GP-ENGINE
8N-7734 LIFTING GP-ENGINE
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR
7E-4836 MOUNTING GP-ALTERNATOR
7E-4836 MOUNTING GP-ALTERNATOR
S/N 29Z1120-1449
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
7E-4836 MOUNTING GP-ALTERNATOR
7E-4836 MOUNTING GP-ALTERNATOR
S/N 29Z1450-1460
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
7E-4836 MOUNTING GP-ALTERNATOR
7E-4836 MOUNTING GP-ALTERNATOR
S/N 29Z1461-UP
AN ATTACHMENT
MOUNTING GP-ENGINE
KIT-DOWEL
423-0349 KIT-DOWEL
423-0349 KIT-DOWEL
FOR USE WITH GEN I FLYWHEELS TO FIT TO GEN II CRANKSHAFTS
FIELD INSTALLATION
KIT-DOWEL
423-0350 KIT-DOWEL
423-0350 KIT-DOWEL
FOR USE WITH GEN I GEARS TO FIT TO GEN II CRANKSHAFTS
FIELD INSTALLATION
MOUNTING GP-SOUND ISOLATION
2W-3037 MOUNTING GP-SOUND ISOLATION
2W-3037 MOUNTING GP-SOUND ISOLATION
FOR USE WITH MARINE ENGINES WITH ENGINE LENGTH RAILS
AN ATTACHMENT
MOUNTING GP-SOUND ISOLATION
5N-1900 MOUNTING GP-SOUND ISOLATION
5N-1900 MOUNTING GP-SOUND ISOLATION
PART OF 2W-3037 MOUNTING GP-SOUND ISOLATION
AN ATTACHMENT
TRUNNION GP-ENGINE
4P-3309 TRUNNION GP-ENGINE
4P-3309 TRUNNION GP-ENGINE
AN ATTACHMENT
TRUNNION GP-ENGINE
7N-1863 TRUNNION GP-ENGINE
7N-1863 TRUNNION GP-ENGINE
FOR USE WITH REMOTE MOUNTED TRANSMISSION WITH FLEXIBLE COUPLING BETWEEN FLYWHEEL & TRANSMISSION, AND 3-POINT MOUNTING SYSTEM
AN ATTACHMENT
PAN GP-OIL
COVER GP-OIL PAN
2W-5616 COVER GP-OIL PAN
2W-5616 COVER GP-OIL PAN
Type 1
AN ATTACHMENT
COVER GP-OIL PAN
2W-5616 COVER GP-OIL PAN
2W-5616 COVER GP-OIL PAN
Type 2
AN ATTACHMENT
DRAIN GP-ENGINE OIL
9Y-7876 DRAIN GP-ENGINE OIL
9Y-7876 DRAIN GP-ENGINE OIL -PAN
AN ATTACHMENT
PAN GP-OIL
7C-7178 PAN GP-OIL
7C-7178 PAN GP-OIL -DEEP SUMP
PAN GP-OIL
8N-7236 PAN GP-OIL
8N-7236 PAN GP-OIL -REAR SUMP
S/N 29Z1120-1460
AN ATTACHMENT
PAN GP-OIL
8N-7236 PAN GP-OIL
8N-7236 PAN GP-OIL -REAR SUMP
S/N 29Z1461-1466
AN ATTACHMENT
PAN GP-OIL
8N-7236 PAN GP-OIL
8N-7236 PAN GP-OIL -REAR SUMP
S/N 29Z1467-UP
AN ATTACHMENT
PAN GP-OIL
9Y-3085 PAN GP-OIL
9Y-3085 PAN GP-OIL -DEEP SUMP
S/N 29Z1120-1323
PART OF 7C-7178 PAN GP-OIL
Type 1
PAN GP-OIL
9Y-3085 PAN GP-OIL
9Y-3085 PAN GP-OIL -DEEP SUMP
S/N 29Z1120-1323
PART OF 7C-7178 PAN GP-OIL
Type 2
PAN GP-OIL
9Y-3085 PAN GP-OIL
9Y-3085 PAN GP-OIL -DEEP SUMP
S/N 29Z1324-UP
PART OF 7C-7178 PAN GP-OIL
Type 1
PAN GP-OIL
9Y-3085 PAN GP-OIL
9Y-3085 PAN GP-OIL -DEEP SUMP
S/N 29Z1324-UP
PART OF 7C-7178 PAN GP-OIL
Type 2
PISTON & ROD GP
CONNECTING ROD GP
377-9943 CONNECTING ROD GP
377-9943 CONNECTING ROD GP
FOR USE WITH ODD CYLINDER
AN ATTACHMENT
CONNECTING ROD GP
377-9944 CONNECTING ROD GP
377-9944 CONNECTING ROD GP
FOR USE WITH EVEN CYLINDER
AN ATTACHMENT
CONNECTING ROD GP
377-9945 CONNECTING ROD GP
377-9945 CONNECTING ROD GP -RH
AN ATTACHMENT
CONNECTING ROD GP
377-9946 CONNECTING ROD GP
377-9946 CONNECTING ROD GP -LH
AN ATTACHMENT
CONNECTING ROD GP
434-0486 CONNECTING ROD GP
434-0486 CONNECTING ROD GP
PART OF 434-0488, 434-0490 CONNECTING ROD GP
FIELD REPLACEMENT ORDER @@@@@434-0488@@@@@
FOR USE WITH EVEN CYLINDER
AN ATTACHMENT
CONNECTING ROD GP
434-0487 CONNECTING ROD GP
434-0487 CONNECTING ROD GP
PART OF 434-0489, 434-0491 CONNECTING ROD GP
FIELD REPLACEMENT ORDER @@@@@434-0489@@@@@
FOR USE WITH ODD CYLINDER
AN ATTACHMENT
CONNECTING ROD GP
434-0488 CONNECTING ROD GP
434-0488 CONNECTING ROD GP
FIELD REPLACEMENT FOR @@@@@434-0486@@@@@
FOR USE WITH EVEN CYLINDER
CONNECTING ROD GP
434-0489 CONNECTING ROD GP
434-0489 CONNECTING ROD GP
FIELD REPLACEMENT FOR @@@@@434-0487@@@@@
FOR USE WITH ODD CYLINDER
CONNECTING ROD GP
434-0490 CONNECTING ROD GP
434-0490 CONNECTING ROD GP -LH
FOR USE WITH EVEN CYLINDERS
AN ATTACHMENT
CONNECTING ROD GP
434-0491 CONNECTING ROD GP
434-0491 CONNECTING ROD GP -RH
FOR USE WITH ODD CYLINDERS
AN ATTACHMENT
PISTON & ROD GP
223-6362 PISTON & ROD GP
223-6362 PISTON & ROD GP
S/N 29Z1389-1456
PISTON & ROD GP
282-0645 PISTON & ROD GP
282-0645 PISTON & ROD GP
S/N 29Z1457-UP
PISTON & ROD GP
6I-2861 PISTON & ROD GP
6I-2861 PISTON & ROD GP
S/N 29Z1219-1388
PISTON & ROD GP
7W-1988 PISTON & ROD GP
7W-1988 PISTON & ROD GP
S/N 29Z1120-1323
PISTON & ROD GP
8N-6224 PISTON & ROD GP
8N-6224 PISTON & ROD GP
S/N 29Z1120-1218
RING GP-PISTON
1N-3967 RING GP-PISTON
1N-3967 RING GP-PISTON
REPLACEMENT
FIELD INSTALLATION
POWER TAKE-OFF GP
POWER TAKE-OFF GP
7W-0281 POWER TAKE-OFF GP
7W-0281 POWER TAKE-OFF GP
CLUTCH
CANNOT BE USED WITH ATTACHMENT DAMPER GP
AN ATTACHMENT
POWER TAKE-OFF GP
7W-0282 POWER TAKE-OFF GP
7W-0282 POWER TAKE-OFF GP
CLUTCH
Type 1
CANNOT BE USED WITH ATTACHMENT DAMPER GP, NON-CAT GENERATOR AND FRONT POWER TAKE-OFF AT RATED SPEEDS GREATER THAN 1650-RPM
AN ATTACHMENT
POWER TAKE-OFF GP
7W-0282 POWER TAKE-OFF GP
7W-0282 POWER TAKE-OFF GP
CLUTCH
Type 2
CANNOT BE USED WITH ATTACHMENT DAMPER GP, NON-CAT GENERATOR AND FRONT POWER TAKE-OFF AT RATED SPEEDS GREATER THAN 1650-RPM
AN ATTACHMENT
PULLEY GP
PULLEY AS-CRANKSHAFT
7N-4106 PULLEY AS-CRANKSHAFT
7N-4106 PULLEY AS-CRANKSHAFT
196.85-MM DIAMETER (7.75-IN)
FOR USE WITH LOW KW STUB SHAFT GP
AN ATTACHMENT
PULLEY AS-CRANKSHAFT
8N-6564 PULLEY AS-CRANKSHAFT
8N-6564 PULLEY AS-CRANKSHAFT
247.65-MM DIAMETER (9.75-IN)
FOR USE WITH LOW KW STUB SHAFT GP
AN ATTACHMENT
PULLEY GP-AUXILIARY DRIVE
210-8602 PULLEY GP-AUXILIARY DRIVE
210-8602 PULLEY GP-AUXILIARY DRIVE -UPPER REAR, LH
AN ATTACHMENT
PULLEY GP-AUXILIARY DRIVE
210-9214 PULLEY GP-AUXILIARY DRIVE
210-9214 PULLEY GP-AUXILIARY DRIVE -LOWER FRONT, LH
AN ATTACHMENT
PULLEY GP-AUXILIARY DRIVE
210-9215 PULLEY GP-AUXILIARY DRIVE
210-9215 PULLEY GP-AUXILIARY DRIVE -LOWER REAR, LH
AN ATTACHMENT
PULLEY GP-AUXILIARY DRIVE
7N-8041 PULLEY GP-AUXILIARY DRIVE
7N-8041 PULLEY GP-AUXILIARY DRIVE -UPPER FRONT, LH
FOR USAGE REFER TO CHART @@@@@ 8N-7500@@@@@
AN ATTACHMENT
PULLEY GP-AUXILIARY DRIVE
8N-8467 PULLEY GP-AUXILIARY DRIVE
8N-8467 PULLEY GP-AUXILIARY DRIVE -LOWER FRONT, LH
FOR USAGE REFER TO CHART @@@@@ 8N-7500@@@@@
AN ATTACHMENT
PULLEY GP-AUXILIARY DRIVE
8N-8468 PULLEY GP-AUXILIARY DRIVE
8N-8468 PULLEY GP-AUXILIARY DRIVE -UPPER REAR, RH
FOR USAGE REFER TO CHART @@@@@ 8N-7500@@@@@
AN ATTACHMENT
SHAFT GP-STUB
SHAFT GP-STUB
7W-3629 SHAFT GP-STUB
7W-3629 SHAFT GP-STUB -FRONT
AN ATTACHMENT
SHAFT GP-STUB
7W-3630 SHAFT GP-STUB
7W-3630 SHAFT GP-STUB -REAR
AN ATTACHMENT
SUPPRESSION GP-SOUND
MOUNTING GP-SOUND ISOLATION
2W-3037 MOUNTING GP-SOUND ISOLATION
2W-3037 MOUNTING GP-SOUND ISOLATION
FOR USE WITH MARINE ENGINES WITH ENGINE LENGTH RAILS
AN ATTACHMENT
MOUNTING GP-SOUND ISOLATION
5N-1900 MOUNTING GP-SOUND ISOLATION
5N-1900 MOUNTING GP-SOUND ISOLATION
PART OF 2W-3037 MOUNTING GP-SOUND ISOLATION
AN ATTACHMENT
SERPENTINE/V-BELTS
GUARD GP-BELT
151-9228 GUARD GP-BELT
151-9228 GUARD GP-BELT -ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
271-9270 GUARD GP-BELT
271-9270 GUARD GP-BELT -ALTERNATOR
S/N 29Z1120-1466
AN ATTACHMENT
GUARD GP-BELT
271-9270 GUARD GP-BELT
271-9270 GUARD GP-BELT -ALTERNATOR
S/N 29Z1467-UP
AN ATTACHMENT
GUARD GP-BELT
7W-5780 GUARD GP-BELT
7W-5780 GUARD GP-BELT -ALTERNATOR
S/N 29Z1120-1466
AN ATTACHMENT
GUARD GP-BELT
7W-5780 GUARD GP-BELT
7W-5780 GUARD GP-BELT -ALTERNATOR
S/N 29Z1467-UP
AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
155-2565 COVER GP-VALVE MECHANISM
155-2565 COVER GP-VALVE MECHANISM
CHROME PLATED
FOR USE WITH MUI ENGINE
AN ATTACHMENT
COVER GP-VALVE MECHANISM
155-2566 COVER GP-VALVE MECHANISM
155-2566 COVER GP-VALVE MECHANISM
CHROME PLATED
FOR USE WITH EUI ENGINE
AN ATTACHMENT
COVER GP-VALVE MECHANISM
265-8040 COVER GP-VALVE MECHANISM
265-8040 COVER GP-VALVE MECHANISM
AN ATTACHMENT
COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
FASTENER GP-VALVE MECHANISM
1W-8109 FASTENER GP-VALVE MECHANISM
1W-8109 FASTENER GP-VALVE MECHANISM -RH
OIL & FUEL FILTER DIFFERENTIAL LINES
FOR USAGE REFER TO CHART @@@@@ 4W-6500@@@@@
AN ATTACHMENT
VALVE MECHANISM GP
195-1926 VALVE MECHANISM GP
195-1926 VALVE MECHANISM GP
S/N 29Z1363-1388
VALVE MECHANISM GP
195-1926 VALVE MECHANISM GP
195-1926 VALVE MECHANISM GP
S/N 29Z1389-UP
VALVE MECHANISM GP
4W-1035 VALVE MECHANISM GP
4W-1035 VALVE MECHANISM GP
S/N 29Z1120-1362
ENGINE OVERHAUL KIT
494-1221 KIT-ENGINE OVERHAUL
494-1221 KIT-ENGINE OVERHAUL
FIELD INSTALLATION
494-1279 KIT-ENGINE OVERHAUL
494-1279 KIT-ENGINE OVERHAUL
FIELD INSTALLATION

Information:

(For parts list, see above)

Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
The Connecting Rod On The Air Compressor Is Now Serviceable {1803}
2002/05/01
Repair Guidelines for Air Compressors {1803}
2003/09/01
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Disassembly and Assembly
Front Balancer Group (3508)
3508, 3512 & 3516 MARINE ENGINES
Engine News
Improved V-Belts For Alternator
1986/10/01
New Design Alternator Belt Used
1989/09/01
Specifications
Belt Tension Chart
3500 Marine Engines
Service Magazine
Improved V-Belts For Alternator{1405}
1986/09/22
New Design Alternator Belt Used{1405,1406}
1989/09/18
New Spacer Used In Alternator Belt Guard Group{7168}
1989/10/23
New Alternator Drive Pulley Seal Used With New Drive Pulley; Poly-Vee Belt Can Be Installed {1425,1357}
1990/11/12
Engine News
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area
1984/01/18
New Camshafts Used In SAE Standard [CCW] Rotation Engines
1985/05/01
New Camshaft Installation Tools Available
1985/09/01
New 8T2998 Lubricant Available
1986/03/01
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment
1986/06/01
Piston And Camshaft Changes
1987/10/01
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes
1990/06/01
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area
1993/11/01
New Sleeve Bearing Used In Camshaft Idler Gear Assembly In Rear Gear Groups{1206}
1995/11/20
New Components In Camshaft Groups Provide Increased Lubrication To Thrust Washer Assembly{1210}
1996/05/09
New Lifters Improve Roller-To-Camshaft Contact And New Bridges Provide Commonality With 3500B Engines {1102,1121,1209}
1996/08/19
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
New Cover Seals are Available {1107, 1201, 1210}
2002/11/01
Quality of Remanufactured Camshafts {1210}
2003/07/01
Procedure for Installing the Camshaft Drive Gear {1212}
2005/12/12
Remanufactured Camshaft and Lifter Kits Are Available for Certain 3500B Engines {1209, 1210}
2013/09/20
Service Letter-NACD
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Camshafts
SUPPLEMENT FOR UPRATED 3500 ENGINES
Camshaft Bearing Position
3500 Marine Engines
Camshaft
3500 Marine Engines
Service Letter-China
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
Service Letter-Asia
Systems Operation
Camshaft
3500 Marine Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Service Letter-APD
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
Testing and Adjusting
Excessive Bearing Wear - Inspect
3500 Marine Engines
Camshaft Timing
3500 Marine Engines
Disassembly and Assembly
Rear Gear Group
3508, 3512 & 3516 MARINE ENGINES
Camshafts
3508, 3512 & 3516 MARINE ENGINES
Camshaft Bearings
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area{1209,1208,1210}
1983/12/05
New Camshafts Used In SAE Standard [CCW] Rotation Engines{1200,1210}
1985/04/22
New Camshaft Installation Tools Available{0600}
1985/08/19
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment{1100}
1986/05/26
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Piston And Camshaft Changes{1214,1210,1200}
1987/10/12
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes{1209}
1990/06/04
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area{1201}
1993/11/09
Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09
Specifications
Directional Clutch<BR> (4L4320)
7251 MARINE GEAR
Disassembly and Assembly
Ahead And Astern Clutches And Clutch Shafts
7251 MARINE GEAR
Reuse And Salvage Guidelines
Inspection of the Coupling Assembly for 3524 Engines {3279}
Inspection of the Coupling Assembly for 3524 Engines {3279}
Disassembly and Assembly
Coupling - Install
SR4B Generators
Coupling - Remove
SR4B Generators
Coupling - Remove
SR4 Generator with VR3 or VR4 Voltage Regulator
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Crankshaft Positions For Injector Timing And Valve Clearance Settings
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Flange-Type Bushing Kits Available For Later Crankshaft Pulleys
1986/01/01
Standard Diameter Crankshafts Meeting Marine Society Approval Requirements Are Available Through Caterpillar Remanufactured Products Program
1986/07/01
Caterpillar Crankshaft Heat Code Locations
1986/11/01
Use Of Crankshaft Seal Adapter Eliminated
1987/07/01
New Wear Sleeve Available For Alternator Drive Pulley
1988/02/01
New Crankshaft Seal Adapter O-Ring Seal Is Made Of Higher Temperature Material
1989/02/01
New Crankshaft Thrust Plate Made Of Brass
1989/05/01
Crankshaft Wear Sleeve Has Smaller Inside Diameter{1160,1161}
1991/03/01
New Cylinder Block And Crankshaft Used
1991/09/01
New Crankshafts With Induction Hardened Fillets
1993/07/01
Service Life of Crankshaft Gears Can Be Extended
1993/07/01
Improved Crankshaft Seal Groups Used
1993/10/01
Remanufactured Crankshaft Interchangeability; Remanufactured &quot;Upgrade To New&quot; (UTN) Availability {1202}
1994/10/01
New Crankshaft Damper Assembly Used {1205}
1995/04/01
Numbering The Crankshaft To Match Counterweights{1202,1231}
1995/10/01
New Counterweight Bolt Assembly Replaces Bolt And Washer {1231}
1998/07/01
Change In Location And Size Of Crankshaft Counterweight Sequence Number{1231,1202}
1998/12/01
Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Be Sure To Use The Correct Procedure To Remove The Rear Crankshaft Seal And Wear Sleeve{1161}
1999/09/01
Recommended Procedure For Lubricating And Tightening The Bolts That Fasten The Counterweights To The Crankshaft {1231}
2000/12/01
Recommended Procedure For Lubricating And Tightening The Bolts That Fasten The Counterweights To The Crankshaft {1231}
2001/03/01
Be Sure To Check The Counterweights On The Engine Crankshaft For Counterweight Sequence Numbers {1231}
2001/08/01
New Main Bearings Provide Improved Bearing Retention in the Cylinder Block {1203}
2001/09/01
Tightness of Bolted Joints with the Torque Turn Procedure {1101, 1202, 1203, 1218}
2005/04/18
Usability of Main Bearings and Camshaft Bearings {1202, 1203, 1218, 1219}
2008/11/24
Important Notice on Installation of Crankshaft Seals and Wear Sleeves {1160, 1161}
2009/02/23
New Crankshaft Seals Are Not Compatible with the Front Adapter on Certain 3500 Mechanical Unit Injection Engines {1160}
New Crankshaft Seals Are Not Compatible with the Front Adapter on Certain 3500 Mechanical Unit Injection Engines {1160}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
Special Instruction
Using 6V9433 Crankshaft Removal Group{1000, 1202}
Using 6V9433 Crankshaft Removal Group{1000, 1202}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Inspection of Crankshaft Main Bearings{1203}
Inspection of Crankshaft Main Bearings{1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-Australia
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-CFEL
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-CSARL
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-Americas
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-Brazil
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
Specifications
Crankshaft Wear Sleeves And Seals
SUPPLEMENT FOR UPRATED 3500 ENGINES
Crankshaft Wear Sleeves and Seals
3500 Marine Engines
Connecting Rod and Main Bearing Journals
3500 Marine Engines
Crankshaft
3500 Marine Engines
Crankshaft
3500 Marine Engines
Service Letter-China
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-Asia
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Systems Operation
Crankshaft
3500 Marine Engines
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Letter-APD
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Testing and Adjusting
Excessive Bearing Wear - Inspect
3500 Marine Engines
Main Bearings
3500 Marine Engines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3500 Marine Engines
Disassembly and Assembly
Crankshaft Vibration Damper (3508 And 3512)
3508, 3512 & 3516 MARINE ENGINES
Crankshaft Vibration Damper (3516)
3508, 3512 & 3516 MARINE ENGINES
Crankshaft Front Seal And Wear Sleeve
3508, 3512 & 3516 MARINE ENGINES
Crankshaft Rear Seal And Wear Sleeve
3508, 3512 & 3516 MARINE ENGINES
Crankshaft Main Bearings
3508, 3512 & 3516 MARINE ENGINES
Camshaft Bearings
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
6V3143 Distorter Adapter Available For Use With 5P7409 Wear Sleeve Distorter For Removal Of Crankshaft Wear Sleeves{0621,1202,1160,1161}
1980/09/08
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/11/21
Use Of Impact Wrench To Tighten Counterweight, Main Bearing Cap And Connecting Rod Bolts{1202,1203,1218,1219,1230}
1984/03/12
Different Thread Lubricant Can Be Used On Connecting Rod And Counterweight Bolts{1202,1218}
1984/05/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Correct Location And Rotation Of Front Timing Gears{1204,1206}
1985/08/05
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Bushing Kits Available For Crankshaft Pulleys{1205}
1985/12/16
Standard Diameter Crankshafts Meeting Marine Society Approval Requirements Are Available Through Caterpillar Remanufactured Products Program{1202}
1986/06/23
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Caterpillar Crankshaft Heat Code Locations{1202}
1986/10/20
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use Of Crankshaft Seal Adapter Eliminated {1150,1160,1161}
1987/06/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Wear Sleeve Available For Alternator Drive Pulley{1400,1405}
1988/02/15
New Alternator Drive Pulley Has Hardened Wear Sleeve; New Seal Used On Pulley{1425,1357}
1988/12/12
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Crankshaft Seal Adapter O-Ring Seal Is Made Of Higher Temperature Material{1160,1161}
1989/01/23
New Cylinder Blocks, Main Bearing Caps, And Main Bearing Cap Bolts Used{1201}
1989/04/03
New Crankshaft Thrust Plate Made Of Brass {1232}
1989/05/08
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06
Correct Torque Required For Bolts In Rear Gear Groups; Specification Omitted From Some Service Manuals{1204,1237,7568}
1990/04/02
Crankshaft Wear Sleeve Has Smaller Inside Diameter{1160,1161}
1991/02/25
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
New Cylinder Block And Crankshaft Used{1201,1202,1231}
1991/09/16
Service Life of Crankshaft Gears Can Be Extended{1204}
1993/07/26
New Crankshaft Seal Groups Prevent Oil Lip Damage {1160,1161}
1993/10/04
New Main Bearings Have Higher Fatigue Strength {1203,1200}
1993/10/04
Numbering The Crankshaft To Match Counterweights {1202,1231}
1995/10/02
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier
1981/07/15
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Use Of Impact Wrench To Tighten Counterweight, Main Bearing Cap And Connecting Rod Bolts
1984/04/11
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Check Height Of Locating Dowels Before Installing Cylinder Head
1985/10/01
Checking Or Adjusting Valve Clearances
1986/01/01
Cylinder Liner Seat Insert Available
1986/05/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
Wider Main Bearing Cap And Higher Torque On Cap Bolts
1988/08/01
New Piston Cooling Jets Used
1988/09/01
New Cylinder Blocks, Main Bearing Caps, And Main Bearing Cap Bolts Used
1989/04/01
New Viton Rubber Seals Used
1989/07/01
Stronger Spacer Plate Prevents Cracking
1989/08/01
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts
1989/11/01
New Video Tape, SEVN1962, Shows Correct Procedures To Counterbore Top Deck Of Cylinder Block And Install Liner Insert
1991/08/01
New Cylinder Block And Crankshaft Used
1991/09/01
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment
1992/11/01
New Main Bearings Have Higher Fatigue Strength
1993/09/01
New O-ring Seal Used On Cylinder Block Covers
1993/10/01
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area
1993/11/01
New Cylinder Liner, Spacer Plate, Spacer Plate Gasket, And Cylinder Head Gasket Used {1216,1221,1124}
1994/09/01
New Cylinder Blocks Made From Stronger Alloy{1201}
1994/12/01
&quot;Narrow Flange&quot; Cylinder Liner Available For Service Repair {1216,1201}
1995/03/01
Improved Spacer Plate Provides Visual Indication Of Use Of &quot;Wide Flange&quot; Cylinder Liners {1221}
1995/05/01
Information For Ordering Replacement Cylinder Block For Engine{1201}
1995/06/01
New Liner Seat Inserts Allow Cylinder Blocks With Deeper Liner Seat Cracks To Be Salvaged{1201,1217}
1995/07/01
5P-8665 Liner Puller Group Changed To Accommodate Cylinder Liner With Larger Diameter Top Flange{1216}
1995/09/01
Premachined Valve Seat Inserts And Precision Valve Guide Increase Valve Life {1103,1104}
1997/02/17
Improved Cylinder Liner Has Longer Service Life{1216}
1997/05/01
Recommended Lubrication And Torque Procedure For Main Bearing Cap Bolts {1203}
1998/09/01
New Spacer Plate Gasket Provides Improved Sealing {1221}
1998/09/01
New Spacer Plate Gasket Provides Improved Sealing{1221}
1998/10/01
Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
New Main Bearings Provide Improved Bearing Retention in the Cylinder Block {1203}
2001/09/01
New Cover Seals are Available {1107, 1201, 1210}
2002/11/01
New Cylinder Liner {1216}
2003/05/01
The Cylinder Block Has Changed {1201}
2003/10/01
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/16
New Liner Seals Are Used and Inserts Are Available for All 3500 Engines {1201}
2010/06/25
A New Top Liner Seal Is Used on 3500 Engines {1201, 7555}
2010/12/16
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {1201, 1216}
2013/08/21
A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
2013/08/21
Cat<SUP>&reg;</SUP> Reman Has Added New Cylinder Block Groups for Certain 3500 and G3500 Commercial Engines {1000, 1201}
2014/10/31
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Ordering &quot;Series B&quot; Replacement Cylinder Blocks for 3500 Series Engines{1201}
Ordering "Series B" Replacement Cylinder Blocks for 3500 Series Engines{1201}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Inspection of Crankshaft Main Bearings{1203}
Inspection of Crankshaft Main Bearings{1203}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Installation of the 422-9537 Repair Kit {1233}
Installation of the 422-9537 Repair Kit {1233}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Service Letter-NACD
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-Australia
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-CFEL
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-CSARL
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-Americas
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-Truck/Ag/Marine
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Specifications
Oil Cooler Bypass And Cooling Jet Sequence Valves
SUPPLEMENT FOR UPRATED 3500 ENGINES
Cylinder Liner
3500 Marine Engines
Connecting Rod
3500 Marine Engines
Piston and Rings - Two-Piece Piston
3500 Marine Engines
Cylinder Block
3500 Marine Engines
Piston and Rings
3500 Marine Engines
Piston and Rings - One-Piece Piston
3500 Marine Engines
Service Letter-China
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-Asia
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Systems Operation
Cylinder Block, Liners and Heads
3500 Marine Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Information Release Memo
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
Service Letter-APD
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Service Letter Supplement
Service Letter Supplement
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Testing and Adjusting
Excessive Bearing Wear - Inspect
3500 Marine Engines
Cylinder Block
3500 Marine Engines
Cylinder Liner Projection
3500 Marine Engines
Main Bearings
3500 Marine Engines
Disassembly and Assembly
Piston Cooling Jets
3508, 3512 & 3516 MARINE ENGINES
Spacer Plates
3508, 3512 & 3516 MARINE ENGINES
Crankshaft Main Bearings
3508, 3512 & 3516 MARINE ENGINES
Cylinder Liners
3508, 3512 & 3516 MARINE ENGINES
Camshaft Bearings
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Use Of Impact Wrench To Tighten Counterweight, Main Bearing Cap And Connecting Rod Bolts{1202,1203,1218,1219,1230}
1984/03/12
Improved Vibration Damper Guard Group Has Flexible Mounting{1205,1200}
1985/04/01
New Camshafts Used In SAE Standard [CCW] Rotation Engines{1200,1210}
1985/04/22
Correct Installation Of Oil Sequence Valves{1304}
1985/04/22
Check Height Of Locating Dowels Before Installing Cylinder Head{1201}
1985/10/07
Cylinder Liner Seat Insert Available{1217,1200}
1986/05/12
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Piston And Camshaft Changes{1214,1210,1200}
1987/10/12
Improvements To Prevent Oil Leakage At Cylinder Heads{1100,1221}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Large Engine Blowby Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1988/06/20
Wider Main Bearing Cap And Higher Torque On Cap Bolts{1201}
1988/08/15
New Piston Cooling Jets Used{1331,1200}
1988/09/05
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Cylinder Blocks, Main Bearing Caps, And Main Bearing Cap Bolts Used{1201}
1989/04/03
New Viton Rubber Seals Used{1302,1307,1312,1306,1317,1200}
1989/07/10
Stronger Spacer Plate Prevents Cracking{1221,1350}
1989/07/24
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
New Video Tape, SEVN1962, Shows Correct Procedures To Counterbore Top Deck Of Cylinder Block And Install Liner Insert {1201,0374,1216}
1991/07/22
New Cylinder Block And Crankshaft Used{1201,1202,1231}
1991/09/16
New Steel Plunger Used In Oil Filter Relief Valve Plunger; Use 2P4005 Oil Filters Instead Of 1R0716 Oil Filters{1315,1318}
1992/07/13
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment{1221}
1992/11/16
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New Main Bearings Have Higher Fatigue Strength {1203,1200}
1993/10/04
New O-ring Seal Used On Cylinder Block Covers {1200}
1993/10/11
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area{1201}
1993/11/09
Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/16
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
Crankshaft Positions For Injector Timing And Valve Clearance Settings
1983/11/30
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area
1984/01/18
Check Cylinder Heads For Water Passage Plugs
1984/04/11
Improved Valve Mechanism Cover Group Has A New Valve Cover And Seal
1985/01/16
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Stronger Push Rod Used
1985/08/01
Valve Mechanism Groups Use New Lifter Assemblies
1985/08/01
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure
1985/09/01
Check Height Of Locating Dowels Before Installing Cylinder Head
1985/10/01
Checking Or Adjusting Valve Clearances
1986/01/01
Stronger Cylinder Heads Used
1986/02/01
Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Check Oil Drain Hole In 0R2671 or 0R2621 Remanufactured Cylinder Heads If Head Used With Breather
1986/11/01
Improved Injector Clamp Eliminates Interference With Bridge
1987/03/01
Material Changed In Exhaust and Inlet Valves
1987/05/01
Improvements To Prevent Oil Leakage At Cylinder Heads
1987/12/01
Silicone Water Seals Reinstated In Cylinder Heads
1988/08/01
New Rocker Arm Shaft Assembly and Bolts Used
1988/09/01
Improved Valve Lifter Assemblies; Better Insert Retention
1989/02/01
New Inlet/Exhaust Valve With Improved Valve Seat Angle, New Valve Guide, and New Cylinder Head Assemblies Groups With New Inlet Valve Seats
1990/03/01
Valve Lifters Can Be Removed Without Removing Cylinder Heads
1990/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability
1990/11/01
Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/03/01
New Rotocoil Used In Cylinder Head Group; New Valve Stem Oil Shield Used In Locomotive Engine Cylinder Head Group{1109,1100}
1991/03/01
Taller Water Seals Used In Cylinder Head Groups
1992/08/01
Correct Identification Of Rocker Arm Assembly Components
1992/10/01
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment
1992/11/01
New Cylinder Head Bolt Tightening Procedure
1992/12/01
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt
1992/12/01
New Water Seals Used In Cylinder Head Groups; New Water Seal Assemblies And O-Ring Seals Used In Insert Kit
1993/02/01
Valve Seat Insert Removal Tools
1993/02/01
Use Molycoat Paste Lubricant On Cylinder Head Bolts
1993/07/01
New Cylinder Head Gasket Used
1993/09/01
Non-Counterbored Valve Guides Used{1104}
1994/03/01
Intake And Exhaust Valve Lash Increased{1105}
1994/07/01
New Cylinder Liner, Spacer Plate, Spacer Plate Gasket, And Cylinder Head Gasket Used {1216,1221,1124}
1994/09/01
New Exhaust Valve With Tapered Stem Used In Engine Cylinder Head Groups{1105}
1995/09/01
New Lifters Improve Roller-To-Camshaft Contact And New Bridges Provide Commonality With 3500B Engines {1102,1121,1209}
1996/08/19
Premachined Valve Seat Inserts And Precision Valve Guide Increase Valve Life {1103,1104}
1997/02/17
Improved Water Seal Reduces The Possibility Of Cylinder Head Joint Water Leaks {1100}
1998/01/20
New Valve Lash Adjusting Tool Group Released For All 3500 Engines {0600,1105,1121}
1998/09/01
Recommended Lubrication And Torque Procedure For Cylinder Head Bolts {1100}
1998/09/01
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01
Bolts, Washers, And Spacers Grouped Into Fastener Groups In Engine Cylinder Head Groups{1100}
1999/02/01
Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
The Oil Seals Have Been Removed From The Exhaust Valves {1100}
2000/12/01
New Water Seals Provide Increased Stability At Higher Temperatures {1100, 1124}
2002/12/01
New Maintenance Intervals for Valve Bridge and Valve Lash Adjustment {1102}
2003/01/01
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
2003/12/01
Oversized Valve Guides are Available {1104}
2005/01/31
Tightness of Bolted Joints with the Torque Turn Procedure {1101, 1202, 1203, 1218}
2005/04/18
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
An Improved Outer Valve Spring is Used {1100, 1108}
2006/01/02
A New Cylinder Head Gasket is Used {1124}
2006/07/24
Use the Correct Parts in the Valve Train {1100}
2007/01/22
Improved Valve Components Are Used {1100, 1108}
2008/12/22
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Remanufactured Cylinder Heads for 3500 and G3500 Engines {1100}
2015/07/10
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installation Of Service Cylinder Head Assembly{1101}
Installation Of Service Cylinder Head Assembly{1101}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Service Letter-Brazil
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Truck/Ag/Marine
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Technical Information Bulletin
Installation Of New Cylinder Port Thermocouples
Installation Of New Cylinder Port Thermocouples
Machining Premachined Valve Seat Inserts
Machining Premachined Valve Seat Inserts
Failure of Reused Rotocoils in 3500 Engines{1100}
Failure of Reused Rotocoils in 3500 Engines{1100}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Specifications
Valve Rocker Arms, Lifters, And Bridges
SUPPLEMENT FOR UPRATED 3500 ENGINES
Cylinder Head
3500 Marine Engines
Cylinder Head Valves
3500 Marine Engines
Cylinder Head
3500 Marine Engines
Cylinder Head Valves
3500 Marine Engines
Cylinder Head
3500 Marine Engines
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Systems Operation
Cylinder Block, Liners and Heads
3500 Marine Engines
Valve System Components
3500 Marine Engines
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Testing and Adjusting
Valve Lash and Valve Bridge Adjustment
3500 Marine Engines
Valve Lash Check
3500 Marine Engines
Cylinder Heads
3500 Marine Engines
Disassembly and Assembly
Cylinder Head Assemblies
3508, 3512 & 3516 MARINE ENGINES
Valves
3508, 3512 & 3516 MARINE ENGINES
Bridge Dowels
3508, 3512 & 3516 MARINE ENGINES
Valve Seat Inserts
3508, 3512 & 3516 MARINE ENGINES
Valve Guides
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/11/21
Check Cylinder Heads For Water Passage Plugs{1100,0374}
1984/03/12
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure {1100,1251}
1985/09/16
Check Height Of Locating Dowels Before Installing Cylinder Head{1201}
1985/10/07
Checking Or Adjusting Valve Clearances{1105,1208,1123}
1986/01/13
Stronger Cylinder Heads Used{1100}
1986/01/27
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment{1100}
1986/05/26
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Check Oil Drain Hole In OR2671 Or OR2621 Remanufactured Cylinder Heads If Head Used With Breather{1100,1300,1317}
1986/10/27
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Material Changed In Exhaust and Inlet Valves{1105}
1987/04/20
Improvements To Prevent Oil Leakage At Cylinder Heads{1100,1221}
1987/11/23
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
New Socket In Valve Rocker Arms Provides Lubrication For Inlet Valve Seats {1103,1105,1123}
1988/04/25
Silicone Water Seals Reinstated In Cylinder Heads{1115,1300}
1988/08/01
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Valve Lifter Assemblies; Better Insert Retention{1112}
1989/02/13
New Head Gasket Used {1124}
1989/05/15
New Inlet/Exhaust Valve With Improved Valve Seat Angle, New Valve Guide, New Cylinder Head Assemblies With New Inlet Valve Seats {1100,1103,1104,1105}
1990/02/26
Valve Lifters Can Be Removed Without Removing Cylinder Heads {1112}
1990/07/02
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability{1124}
1990/10/29
Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/01/28
New Rotocoil Used In Cylinder Head Group; New Valve Stem Oil Shield Used In Locomotive Engine Cylinder Head Group{1109,1100}
1991/03/11
Taller Water Seals Used In Cylinder Head Groups {1115}
1992/08/10
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment{1221}
1992/11/16
New Cylinder Head Bolt Tightening Procedure{1100}
1992/12/21
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt{1102}
1992/12/21
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New Water Seals Used In Cylinder Head Groups; New Water Seal Assemblies And O-Ring Seals Used In Insert Kit {1115}
1993/02/15
New Cylinder Head Gasket Used{1124}
1993/09/20
New Valve Cover Seals Are Used For Mechanical Unit Injector (MUI) And Electronic Unit Injector (EUI) Engines{1107}
1996/09/30
Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
Engine News
Improved Vibration Damper Guard Group Has Flexible Mounting
1985/04/01
Improved Damper Guard Used
1986/10/01
Damper Groups Improved To Help Prevent Leaks Of Viscous Fluids
1989/07/01
Add Bolt Dampers To Oil Pump Mounting Bolts To Prevent Bolt Failures
1990/10/01
New Damper Guard Group Used
1993/04/01
New Crankshaft Damper Assembly Used {1205}
1995/04/01
Specifications
Vibration Damper Groups
SUPPLEMENT FOR UPRATED 3500 ENGINES
Vibration Damper Guard
3500 Marine Engines
Vibration Damper
3500 Marine Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Information Release Memo
REMANUFACTURED DAMPERS FOR THE 3500 AND 3600 ENGINES
REMANUFACTURED DAMPERS FOR THE 3500 AND 3600 ENGINES
Testing and Adjusting
Vibration Damper
3500 Marine Engines
Disassembly and Assembly
Crankshaft Vibration Damper (3508 And 3512)
3508, 3512 & 3516 MARINE ENGINES
Crankshaft Vibration Damper (3516)
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Improved Vibration Damper Guard Group Has Flexible Mounting{1205,1200}
1985/04/01
Bushing Kits Available For Crankshaft Pulleys{1205}
1985/12/16
Improved Damper Guard Used{1205}
1986/09/29
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Damper Groups Improved To Help Prevent Leaks Of Viscous Fluids{1205}
1989/06/26
Add Bolt Dampers To Oil Pump Mounting Bolts to Prevent Bolt Failures{1304}
1990/09/24
New Damper Guard Group Used{7150}
1993/04/12
Engine News
New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives
1987/04/01
Front Idler And Accessory Drive Gears Improved
1989/05/01
New Drive Gear Used In Auxiliary Pump Group{1206}
1996/02/16
Improved Alternator Drive Assemblies, Auxiliary Drive Pulley Groups and Accessory Drive Groups {1151, 1207, 1425}
2003/10/01
Specifications
Accessory (Shutoff) Drive Group
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Accessory Drive (Upper Right Hand)
3500 Marine Engines
Accessory Drive (Lower Left Hand)
3500 Marine Engines
Accessory Drive (Lower Left Hand)
3500 Marine Engines
Accessory Drive (Upper Left Hand)
3500 Marine Engines
Disassembly and Assembly
Accessory Drive (Front)
3508, 3512 & 3516 MARINE ENGINES
Front Drive Housing
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives{1206,1207}
1987/04/06
Front Idler And Accessory Drive Gears Improved {1206,1361}
1989/05/15
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
Engine News
New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives
1987/04/01
Front Idler And Accessory Drive Gears Improved
1989/05/01
New Drive Gear Used In Auxiliary Pump Group{1206}
1996/02/16
Improved Alternator Drive Assemblies, Auxiliary Drive Pulley Groups and Accessory Drive Groups {1151, 1207, 1425}
2003/10/01
New Seal for the Front Housing {1151, 1207}
2004/06/01
Specifications
Accessory (Shutoff) Drive Group
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Disassembly and Assembly
Accessory Drive (Front)
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives{1206,1207}
1987/04/06
Front Idler And Accessory Drive Gears Improved {1206,1361}
1989/05/15
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
Engine News
Procedure for Tightening the Locknut for the Fan Drive on 3500 Engines {1359}
2003/04/01
Reuse And Salvage Guidelines
Specifications for Reusability of the <NOBR>251-7646</NOBR> Fan Drive Bracket Assembly on 3500 Machine Engines {1359}
Specifications for Reusability of the 251-7646 Fan Drive Bracket Assembly on 3500 Machine Engines {1359}
Special Instruction
Oil Seal Replacement For Jacket Water Pumps{1361}
Oil Seal Replacement For Jacket Water Pumps{1361}
Disassembly and Assembly
Oil And Water Pump Drive
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
New Water Pump Groups Have Improved Impellers And Shafts {1361,1364,1389}
1984/02/06
New Oil Seal For Water Pumps Has Hydrodynamic Grooves{1361,1389}
1988/11/21
Front Idler And Accessory Drive Gears Improved {1206,1361}
1989/05/15
Special Instruction
Oil Seal Replacement For Jacket Water Pumps{1361}
Oil Seal Replacement For Jacket Water Pumps{1361}
Technical Information Bulletin
Remanufactured Water Pump For 3500 Engine
Remanufactured Water Pump For 3500 Engine
Service Magazine
New Oil Seal For Water Pumps Has Hydrodynamic Grooves{1361,1389}
1988/11/21
Front Idler And Accessory Drive Gears Improved {1206,1361}
1989/05/15
Engine News
Proper Storage Procedures Are Available For Commercial Engines {1000}
Proper Storage Procedures Are Available For Commercial Engines {1000}
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Engine News
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Gasket Removed From Flywheel Housing Cover Groups
1987/04/01
New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives
1987/04/01
Front Idler And Accessory Drive Gears Improved
1989/05/01
Correct Torque Required For Bolts In Rear Gear Groups; Specification Omitted From Some Service Manuals
1990/04/01
Rear Gear (Cam Drive) Groups Improved
1991/05/01
Correct Installation of Front Gear Train Idler Shaft{1237}
1994/11/01
New Idler Gear Assembly Used In Rear Gear Groups{1206}
1995/06/01
New Flywheels Are Used {1156}
2003/08/01
Heavy Duty, Engine Turning Tool Released {0701, 1156, 1157}
2006/03/20
Service Letter-NACD
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Specifications
Rear Gear Group<BR> (3508)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Rear Gear Group<BR> (3512 &amp; 3516)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Flywheel
3500 Marine Engines
Service Letter-China
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Service Letter-APD
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Testing and Adjusting
Flywheel - Inspect
3500 Marine Engines
Disassembly and Assembly
Flywheel
3508, 3512 & 3516 MARINE ENGINES
Flywheel Housing
3508, 3512 & 3516 MARINE ENGINES
Rear Gear Group
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Location And Rotation Of Front Timing Gears{1204,1206}
1985/08/05
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Gasket Removed From Flywheel Housing Cover Groups{1157}
1987/03/23
New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives{1206,1207}
1987/04/06
Use Of Crankshaft Seal Adapter Eliminated {1150,1160,1161}
1987/06/15
Front Idler And Accessory Drive Gears Improved {1206,1361}
1989/05/15
Correct Torque Required For Bolts In Rear Gear Groups; Specification Omitted From Some Service Manuals{1204,1237,7568}
1990/04/02
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
Service Life of Crankshaft Gears Can Be Extended{1204}
1993/07/26
Engine News
Correct Location And Rotation Of Front Timing Gears
1985/08/01
Two Front Timing Gear Housings Available
1987/03/01
New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives
1987/04/01
Front Idler And Accessory Drive Gears Improved
1989/05/01
Correct Torque Required For Bolts In Rear Gear Groups; Specification Omitted From Some Service Manuals
1990/04/01
Rear Gear (Cam Drive) Groups Improved
1991/05/01
Service Life of Crankshaft Gears Can Be Extended
1993/07/01
Correct Installation of Front Gear Train Idler Shaft{1237}
1994/11/01
New Idler Gear Assembly Used In Rear Gear Groups{1206}
1995/06/01
New Sleeve Bearing Used In Camshaft Idler Gear Assembly In Rear Gear Groups{1206}
1995/11/20
New Drive Gear Used In Auxiliary Pump Group{1206}
1996/02/16
New Gear And New Shaft Assemblies Used In Scavenge Oil Pump Groups {1312}
1998/09/01
New Gear And New Shaft Assemblies Used In Scavenge Oil Pump Groups{1312}
1998/10/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Front Gear Group Changed To Help Keep Oil Pump Adapter Assembly Bolts Tight{1206,1304}
1999/09/01
Replace the Gear when the Sleeve Bearing is Replaced {1212, 1234}
2005/04/18
A New Oil Pump Adapter Assembly is Used {1206, 1313}
2005/10/31
Procedure for Installing the Camshaft Drive Gear {1212}
2005/12/12
Special Instruction
Machining of Replacement Sleeve Bearings{1206, 1212, 1234}
Machining of Replacement Sleeve Bearings{1206, 1212, 1234}
Service Letter-NACD
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Specifications
Rear Gear Group<BR> (3508)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Rear Gear Group<BR> (3512 &amp; 3516)
SUPPLEMENT FOR UPRATED 3500 ENGINES
Gear Group (Front)
3500 Marine Engines
Gear Group (Rear)
3500 Marine Engines
Service Letter-China
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Service Letter-APD
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Disassembly and Assembly
Crankshaft Front Seal And Wear Sleeve
3508, 3512 & 3516 MARINE ENGINES
Front Drive Housing
3508, 3512 & 3516 MARINE ENGINES
Rear Gear Group
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Correct Location And Rotation Of Front Timing Gears{1204,1206}
1985/08/05
Two Front Timing Gear Housings Available{1162,1150}
1987/02/23
New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives{1206,1207}
1987/04/06
Front Idler And Accessory Drive Gears Improved {1206,1361}
1989/05/15
Correct Torque Required For Bolts In Rear Gear Groups; Specification Omitted From Some Service Manuals{1204,1237,7568}
1990/04/02
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
Service Life of Crankshaft Gears Can Be Extended{1204}
1993/07/26
Engine News
New Alternator Guard Used In Belt Guard Groups
1993/03/01
New Alternator Guards are Used on Certain 3500 Engines {7174}
2013/03/01
Service Magazine
New Spacer Used In Alternator Belt Guard Group{7168}
1989/10/23
New Alternator Guard Used In Belt Guard Groups{7168}
1993/03/08
Engine News
Gasket Removed From Flywheel Housing Cover Groups
1987/04/01
New Flywheel Housing Assembly Available{1157}
1999/05/01
Be Sure To Use The Correct Procedure To Remove The Rear Crankshaft Seal And Wear Sleeve{1161}
1999/09/01
Heavy Duty, Engine Turning Tool Released {0701, 1156, 1157}
2006/03/20
Sealing and Installing the Flywheel Housing {1157, 7555}
2006/03/27
Specifications
Flywheel Housing
3500 Marine Engines
Testing and Adjusting
Flywheel Housing - Inspect
3500 Marine Engines
Disassembly and Assembly
Crankshaft Rear Seal And Wear Sleeve
3508, 3512 & 3516 MARINE ENGINES
Flywheel Housing
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Gasket Removed From Flywheel Housing Cover Groups{1157}
1987/03/23
Use Of Crankshaft Seal Adapter Eliminated {1150,1160,1161}
1987/06/15
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Engine News
Two Front Timing Gear Housings Available
1987/03/01
New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives
1987/04/01
Front Idler And Accessory Drive Gears Improved
1989/05/01
Correct Installation of Front Gear Train Idler Shaft{1237}
1994/11/01
New Drive Gear Used In Auxiliary Pump Group{1206}
1996/02/16
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Front Gear Group Changed To Help Keep Oil Pump Adapter Assembly Bolts Tight{1206,1304}
1999/09/01
New Seals for the Front Housing {1151, 1207}
2003/10/01
Improved Alternator Drive Assemblies, Auxiliary Drive Pulley Groups and Accessory Drive Groups {1151, 1207, 1425}
2003/10/01
New Seal for the Front Housing {1151}
2003/11/01
New Seal for the Front Housing {1151, 1207}
2004/06/01
Disassembly and Assembly
Crankshaft Front Seal And Wear Sleeve
3508, 3512 & 3516 MARINE ENGINES
Front Drive Housing
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Correct Location And Rotation Of Front Timing Gears{1204,1206}
1985/08/05
Two Front Timing Gear Housings Available{1162,1150}
1987/02/23
New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives{1206,1207}
1987/04/06
Front Idler And Accessory Drive Gears Improved {1206,1361}
1989/05/15
Correct Torque Required For Bolts In Rear Gear Groups; Specification Omitted From Some Service Manuals{1204,1237,7568}
1990/04/02
Engine News
New Stronger Engine Lifting Eye Bracket Used{1154}
1995/09/01
New Engine Lifting Eye Assembly {1122}
1998/12/01
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier
1981/07/15
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Check Height Of Locating Dowels Before Installing Cylinder Head
1985/10/01
Use Of Crankshaft Seal Adapter Eliminated
1987/07/01
Improvements To Prevent Oil Leakage At Cylinder Heads
1987/12/01
New Wear Sleeve Available For Alternator Drive Pulley
1988/02/01
New Rocker Arm Shaft Assembly and Bolts Used
1988/09/01
New Piston Cooling Jets Used
1988/09/01
New Crankshaft Seal Adapter O-Ring Seal Is Made Of Higher Temperature Material
1989/02/01
New Cylinder Blocks, Main Bearing Caps, And Main Bearing Cap Bolts Used
1989/04/01
Damper Groups Improved To Help Prevent Leaks Of Viscous Fluids
1989/07/01
Valve Lifters Can Be Removed Without Removing Cylinder Heads
1990/07/01
Crankshaft Wear Sleeve Has Smaller Inside Diameter{1160,1161}
1991/03/01
New Cylinder Block And Crankshaft Used
1991/09/01
New Damper Guard Group Used
1993/04/01
Improved Crankshaft Seal Groups Used
1993/10/01
Intake And Exhaust Valve Lash Increased{1105}
1994/07/01
New Oil Pan With Oil Level Sensor Mounting Hole{1302}
1995/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Oil Seal Replacement For Jacket Water Pumps{1361}
Oil Seal Replacement For Jacket Water Pumps{1361}
Service Letter-NACD
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Australia
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-CFEL
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-CSARL
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Americas
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Brazil
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Truck/Ag/Marine
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Specifications
Crankshaft Wear Sleeves And Seals
SUPPLEMENT FOR UPRATED 3500 ENGINES
Service Letter-China
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Asia
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-APD
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Piston Cooling Jet Retainer Bolts Need To Be Inspected For The Correct Torque On Certain 3508, 3512, And 3516 Engines; And 785 trucks
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Magazine
6V3143 Distorter Adapter Available For Use With 5P7409 Wear Sleeve Distorter For Removal Of Crankshaft Wear Sleeves{0621,1202,1160,1161}
1980/09/08
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Special Procedure Needed To Clean 3500 Series Engine Pistons{0374,1214}
1983/05/30
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/11/21
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area{1209,1208,1210}
1983/12/05
Check Cylinder Heads For Water Passage Plugs{1100,0374}
1984/03/12
Use Of Impact Wrench To Tighten Counterweight, Main Bearing Cap And Connecting Rod Bolts{1202,1203,1218,1219,1230}
1984/03/12
New Air Start And Override Valve Has Stronger Mounting{1451}
1984/06/11
Improved Oil Ring For Pistons Eliminates Expander Problems That Lead To Ring Breakage During Installation{1215}
1985/03/18
Improved Vibration Damper Guard Group Has Flexible Mounting{1205,1200}
1985/04/01
New Camshafts Used In SAE Standard [CCW] Rotation Engines{1200,1210}
1985/04/22
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Camshaft Installation Tools Available{0600}
1985/08/19
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Check Height Of Locating Dowels Before Installing Cylinder Head{1201}
1985/10/07
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Bushing Kits Available For Crankshaft Pulleys{1205}
1985/12/16
Checking Or Adjusting Valve Clearances{1105,1208,1123}
1986/01/13
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Cylinder Liner Seat Insert Available{1217,1200}
1986/05/12
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment{1100}
1986/05/26
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Improved V-Belts For Alternator{1405}
1986/09/22
Improved Damper Guard Used{1205}
1986/09/29
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Check Oil Drain Hole In OR2671 Or OR2621 Remanufactured Cylinder Heads If Head Used With Breather{1100,1300,1317}
1986/10/27
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Two Front Timing Gear Housings Available{1162,1150}
1987/02/23
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Gasket Removed From Flywheel Housing Cover Groups{1157}
1987/03/23
New Idler Shaft And Sealing Washers Used In Front Gears And Accessory Drives{1206,1207}
1987/04/06
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Piston And Camshaft Changes{1214,1210,1200}
1987/10/12
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
Improvements To Prevent Oil Leakage At Cylinder Heads{1100,1221}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Wear Sleeve Available For Alternator Drive Pulley{1400,1405}
1988/02/15
New Socket In Valve Rocker Arms Provides Lubrication For Inlet Valve Seats {1103,1105,1123}
1988/04/25
Large Engine Blowby Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1988/06/20
Wider Main Bearing Cap And Higher Torque On Cap Bolts{1201}
1988/08/15
New Rocker Arm Shaft Assembly and Bolts Used{1102}
1988/09/05
New Oil Seal For Water Pumps Has Hydrodynamic Grooves{1361,1389}
1988/11/21
New Alternator Drive Pulley Has Hardened Wear Sleeve; New Seal Used On Pulley{1425,1357}
1988/12/12
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Crankshaft Seal Adapter O-Ring Seal Is Made Of Higher Temperature Material{1160,1161}
1989/01/23
Improved Valve Lifter Assemblies; Better Insert Retention{1112}
1989/02/13
New Cylinder Blocks, Main Bearing Caps, And Main Bearing Cap Bolts Used{1201}
1989/04/03
Damper Groups Improved To Help Prevent Leaks Of Viscous Fluids{1205}
1989/06/26
New Viton Rubber Seals Used{1302,1307,1312,1306,1317,1200}
1989/07/10
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Lube System Screen Assembly Available For Use During Dynamometer Testing{1307}
1989/08/21
New Design Alternator Belt Used{1405,1406}
1989/09/18
New Spacer Used In Alternator Belt Guard Group{7168}
1989/10/23
Engine Coolant Can Be Recycled{1395}
1989/11/13
Modification Of 2W1054 Screen Assembly For Use During Dynamometer Testing{1307}
1989/12/11
New Inlet/Exhaust Valve With Improved Valve Seat Angle, New Valve Guide, New Cylinder Head Assemblies With New Inlet Valve Seats {1100,1103,1104,1105}
1990/02/26
Shorter Bolt Used To Hold Oil Pan Drain Cover{1302}
1990/03/12
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes{1209}
1990/06/04
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability{1124}
1990/10/29
New Alternator Drive Pulley Seal Used With New Drive Pulley; Poly-Vee Belt Can Be Installed {1425,1357}
1990/11/12

Truck sale:

 
719,892 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3516, mobile generator sets, Construction
298,989 
Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3516, Stationary Generator Sets, Construction
800,000 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.