124-3174 GOVERNOR GP PART OF 1W-5021, 7W-3333, 8N-6712 GOVERNOR GP ALSO AN ATTACHMENT 3516 MARINE ENGINE



FUEL SYSTEM
GOVERNOR GP
LINES GP-FUEL INJECTION

MARINE ENGINE 3516 MARINE ENGINE 72Z
 3516 Marine Engine 72Z00471-UP SEBP2962 3516 72Z   (1982)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR AS-ELECTRONIC
7E-1232 GOVERNOR AS-ELECTRONIC
GOVERNOR GP
124-3173 GOVERNOR GP
GOVERNOR GP
124-3174 GOVERNOR GP
1W-5021 GOVERNOR GP
2W-8583 GOVERNOR GP
GOVERNOR GP
6I-0664 GOVERNOR GP
 

#SEBP29620440
 

124-3174: GOVERNOR GP

124-3174 GOVERNOR GP
PART OF 1W-5021, 7W-3333, 8N-6712 GOVERNOR GP
ALSO AN ATTACHMENT
i00516766 SEBP2962
1243174 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 1W-9782 [1] GASKET-SHUTOFF  
2. 4P-6857 [2] GASKET-PLATE  
3. 101-8238 Y [1] CONTROL GP-FUEL RATIO  
4. 6I-3846 [1] BUSHING-GUIDE  
5. 6I-3844 [1] COVER AS-SETTING  
  6I-3847 [1] KIT-REPAIR (FUEL RATIO CONTROL)  
    (INCLUDES SEALS & BUSHINGS)
6. 6I-3842 Y [1] PUMP GP-GEROTOR (GOVERNOR)  
7. 2W-4606 [1] PLATE-ORIFICE  
8. 2W-0124 [1] GASKET  
9. 129-3096 [1] GAUGE-SIGHT (OIL LEVEL)(GOVERNOR OIL)  
10. 4P-6538 Y [1] CONTROL GP-GOVERNOR  
11. 131-4345 [1] GLASS-SIGHT  
12. 1W-9780 [1] GASKET  
13. 123-9693 [1] CAP-BREATHER (ATMOSPHERIC)  
14. 8L-2786 [2] SEAL-O-RING  
15. 9S-4185 [1] PLUG (3/4-16-THD)  
16. 135-6910 [1] BASE  
17. 032-2580 [26] SCREW-TAPPING (1/4-20X1-IN)  
18. 2W-1476 [1] SPRING  
19. 2W-4619 [1] SEAT  
20. 2W-4622 [1] ROD  
21. 5P-4672 [1] RING-RETAINING  
22. 7C-0077 [1] GUIDE AS-ROD  
23. 2W-0138 [3] SCREW-FORMING (1/4-20X1-IN)  
24. 8H-0707 [7] BOLT (1/4-20X1-IN)  
25. 7C-3900 [1] PLUG  
26. 5P-7812 [1] SEAL-O-RING  
27. 9X-5999 [1] BOLT (1/4-20X1-IN)  
28. 6V-5048 [2] SEAL-O-RING  
29. 030-7946 [2] ELBOW  
30. 8L-3161 [2] NUT-FLARED (7/16-20-THD)  
31. 8L-3162 [2] SLEEVE-FLARED  
32. 2W-4633 [1] TUBE  
33. 3L-6759 [1] WASHER  
34. 4P-6860 [1] BLOCK-CAM  
35. 2W-5975 [1] SCREW-BOLT (1/4-28X0.5-IN)  
36. 2W-1228 [1] NUT-SHUTDOWN ADJUSTMENT (1/4-28-THD)  
37. 4P-6859 [1] LEVER AS  
38. 4P-6861 [1] ROD AS  
39. 4P-6863 [1] LEVER AS  
40. 4P-6867 [1] ROD AS-SHUTOFF  
41. 2W-0776 [1] COVER-SHUTDOWN  
  Y   SEPARATE ILLUSTRATION
 

#SEBP29620441
 

1W-5021: GOVERNOR GP

1W-5021 GOVERNOR GP -LH
3161 WITH SMOKE LIMITER & HYDRAULIC/PNEUMATIC SPEED SETTING
FOR USE WITH STANDARD ENGINE ROTATION
AN ATTACHMENT
i00352175 SEBP2962
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
  8N-4263 Y [1] COVER GP-ACCESSORY DRIVE  
  1W-2135 Y [1] DRIVE GP-GOVERNOR  
  1W-6036 Y [1] FASTENER GP-FUEL INJ PUMP  
  7E-8948 [1] GOVERNOR GP  
    -OR-
  6I-0665 Y [1] GOVERNOR GP  
    -OR-
  124-3174 Y [1] GOVERNOR GP  
  1W-5171 Y [1] LINES GP-FUEL RATIO CONTROL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP29620442
 

2W-8583: GOVERNOR GP

2W-8583 GOVERNOR GP -LH
FOR USE WITH STANDARD ENGINE ROTATION
AN ATTACHMENT
i00360987 SEBP2962
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
  8N-4263 Y [1] COVER GP-ACCESSORY DRIVE  
  1W-2135 Y [1] DRIVE GP-GOVERNOR  
  1W-6036 Y [1] FASTENER GP-FUEL INJ PUMP  
  7E-8949 [1] GOVERNOR GP  
    -OR-
  6I-0664 Y [1] GOVERNOR GP  
    -OR-
  124-3173 Y [1] GOVERNOR GP  
  1W-5171 Y [1] LINES GP-FUEL RATIO CONTROL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP29620443
 

6I-0664: GOVERNOR GP

6I-0664 GOVERNOR GP
PART OF 2W-8583, 8N-6714 GOVERNOR GP
AN ATTACHMENT
i00390587 SEBP2962
6I0664 GOVERNOR GP Parts scheme 6I0664 GOVERNOR GP Parts scheme 6I0664 GOVERNOR GP Parts scheme 6I0664 GOVERNOR GP Parts scheme 6I0664 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 2W-4320 [1] COVER-STOP  
2. 9S-4182 [1] PLUG (7/16-20-THD)  
  6V-5048 [2] SEAL-O-RING  
3. 1W-9782 [1] GASKET-SHUTOFF  
4. 2W-4304 [1] SPRING-PIN  
5. 2W-0776 [1] COVER-SHUTDOWN  
6. 1W-9780 [1] GASKET  
7. 9L-9777 [1] SETSCREW  
8. 7E-3449 [1] STOP  
9. 8H-0707 [9] BOLT (1/4-20X1-IN)  
10. 2W-0243 [1] PLATE-IDENTIFICATION (LEVER & DROOP)  
11. 7E-0924 [1] SCREW AS-STOP  
12. 7E-5563 [2] BEARING-SHAFT  
13. 4P-6857 [2] GASKET-PLATE  
14. 032-2580 [30] SCREW-TAPPING (1/4-20X1-IN)  
15. 101-8238 Y [1] CONTROL GP-FUEL RATIO  
16. 7C-3985 [1] BASE  
17. 7C-9642 [2] PIN-COTTER  
18. 4W-3176 [2] PIN  
19. 2W-0138 [3] SCREW-FORMING (1/4-20X1-IN)  
20. 4P-4431 [1] BRACKET AS  
21. 2W-4606 [1] PLATE-ORIFICE  
22. 2W-4315 [1] VALVE-NEEDLE  
23. 2W-0224 [1] SEAL-O-RING  
24. 7E-5562 [1] BEARING-SHAFT  
25. 9X-5999 [1] BOLT (1/4-20X1-IN)  
26. 2W-4322 [1] RETAINER-PIN  
27. 5P-7812 [1] SEAL-O-RING  
28. 2W-0774 [1] PLUG AS  
29. 2W-0222 [1] SEAL-O-RING  
30. 2W-4624 [1] PLUG-DETENT ADJUSTMENT  
31. 2W-0221 [1] SEAL-O-RING  
32. 2K-3455 [1] PIN-SPRING  
33. 2W-4314 [1] PIN-ZEROING  
34. 032-2580 [2] SCREW-TAPPING (1/4-20X1-IN)  
35. 2W-0148 [1] SLIDER AS  
36. 2W-0282 [3] SEAL-OIL  
37. 2W-4310 [1] PIN  
38. 2F-3219 [1] NUT-ELASTIC STOP  
39. 4W-3178 [1] WASHER-WAVE (SPRING)  
40. 7E-0915 [1] SHAFT-SETTING (SPEED)  
41. 2W-0124 [1] GASKET  
42. 7C-4262 [2] SPRING-BUFFER  
43. 2W-4307 [1] PISTON  
44. 9S-4185 [1] PLUG (3/4-16-THD)  
  8L-2786 [1] SEAL-O-RING  
45. 5P-7812 [1] SEAL-O-RING  
46. 2W-0140 [1] SPRING-RETURN  
47. 2W-4316 [1] SEAT-LOADING  
48. 2W-4321 [1] LINK-LOADING  
49. 7C-3018 [1] ORIFICE-GOVERNOR  
50. 4P-6864 [1] LEVER AS-TERMINAL  
51. 4P-8144 [1] PLUG AS  
52. 2W-4995 [1] SETSCREW-SOCKET  
53. 2W-4305 [1] LINK-CONNECTING  
54. 2W-4318 [1] PISTON-SERVO  
55. 2W-6417 [1] PIN-PISTON LINK  
56. 7C-3900 [1] PLUG  
  5P-7812 [1] SEAL-O-RING  
57. 2F-3219 [1] NUT-ELASTIC STOP  
58. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
59. 7E-0907 [1] SCREW AS-DROOP  
60. 2W-1645 [1] SPRING  
61. 2W-4319 [1] PISTON  
62. 2H-3429 [1] RING-RETAINING  
63. 2W-0283 [1] SPRING-PLUNGER  
64. 4P-6927 [1] VALVE AS-PILOT  
65. 2W-4324 [1] SEAT-ACCUMULATOR  
66. 2W-0144 [2] SHAFT-TERMINAL  
67. 7C-0078 [1] SPRING  
68. 6I-3844 [1] COVER AS-SETTING  
69. 7C-3988 [1] COUPLING AS-DRIVE (SOLID)  
70. 6I-3842 Y [1] PUMP GP-GEROTOR (GOVERNOR)  
71. 2W-0447 [1] LEVER-SETTING  
72. 4P-6867 [1] ROD AS-SHUTOFF  
73. 4P-6860 [1] BLOCK-CAM  
74. 4P-6863 [1] LEVER AS  
75. 4P-6861 [1] ROD AS  
76. 2W-1228 [1] NUT-SHUTDOWN ADJUSTMENT (1/4-28-THD)  
77. 3L-6759 [1] WASHER  
78. 6I-3846 [1] BUSHING-GUIDE  
79. 4P-6859 [1] LEVER AS  
80. 2W-5975 [1] SCREW-BOLT (1/4-28X0.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP29620444
 

6I-0665: GOVERNOR GP

6I-0665 GOVERNOR GP
PART OF 1W-5021, 7W-3333, 8N-6712 GOVERNOR GP
ALSO AN ATTACHMENT
i00390601 SEBP2962
6I0665 GOVERNOR GP Parts scheme 6I0665 GOVERNOR GP Parts scheme 6I0665 GOVERNOR GP Parts scheme 6I0665 GOVERNOR GP Parts scheme 6I0665 GOVERNOR GP Parts scheme 6I0665 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 2W-4633 [1] TUBE  
2. 030-7946 [2] ELBOW  
  6V-5048 [2] SEAL-O-RING  
3. 1W-9782 [1] GASKET-SHUTOFF  
4. 4P-6538 Y [1] CONTROL GP-GOVERNOR  
5. 2W-0776 [1] COVER-SHUTDOWN  
6. 1W-9780 [1] GASKET  
7. 9L-9777 [1] SETSCREW  
8. 7E-3449 [1] STOP  
9. 8H-0707 [1] BOLT (1/4-20X1-IN)  
10. 2W-0243 [1] PLATE-IDENTIFICATION  
11. 7E-0924 [1] SCREW AS-STOP  
12. 7E-5563 [2] BEARING-SHAFT  
13. 4P-6857 [2] GASKET-PLATE  
14. 032-2580 [30] SCREW-TAPPING (1/4-20X1-IN)  
15. 101-8238 Y [1] CONTROL GP-FUEL RATIO  
16. 7C-3985 [1] BASE  
17. 7C-9642 [2] PIN-COTTER  
18. 4W-3176 [2] PIN  
19. 2W-0138 [4] SCREW-FORMING (1/4-20X1-IN)  
20. 4P-4431 [1] BRACKET AS  
21. 2W-4606 [1] PLATE-ORIFICE  
22. 2W-4315 [1] VALVE-NEEDLE  
23. 2W-0224 [1] SEAL-O-RING  
24. 7E-5562 [1] BEARING-SHAFT  
25. 9X-5999 [1] BOLT (1/4-20X1-IN)  
26. 2W-4322 [1] RETAINER-PIN  
27. 5P-7812 [1] SEAL-O-RING  
28. 2W-0774 [1] PLUG AS  
29. 2W-0222 [1] SEAL-O-RING  
30. 2W-4624 [1] PLUG-DETENT ADJUSTMENT  
31. 2W-0221 [1] SEAL-O-RING  
32. 2K-3455 [1] PIN-SPRING  
33. 2W-4314 [1] PIN-ZEROING  
34. 2W-4304 [1] SPRING-PIN  
35. 2W-4320 [1] COVER-STOP  
36. 8L-3161 [2] NUT-FLARED (7/16-20-THD)  
  8L-3162 [2] SLEEVE-FLARED  
37. 032-2580 [6] SCREW-TAPPING (1/4-20X1-IN)  
38. 2W-0148 [1] SLIDER AS  
39. 2W-0282 [3] SEAL-OIL  
40. 2W-4310 [1] PIN  
41. 2F-3219 [1] NUT-ELASTIC STOP  
42. 4W-3178 [1] WASHER-WAVE (SPRING)  
43. 7E-0915 [1] SHAFT-SETTING (SPEED)  
44. 2W-0124 [1] GASKET  
45. 7C-4262 [2] SPRING-BUFFER  
46. 2W-4307 [1] PISTON  
47. 9S-4185 [1] PLUG (3/4-16-THD)  
  8L-2786 [1] SEAL-O-RING  
48. 5P-7812 [1] SEAL-O-RING  
49. 2W-0140 [1] SPRING-RETURN  
50. 2W-4316 [1] SEAT-LOADING  
51. 2W-4321 [1] LINK-LOADING  
52. 7C-3018 [1] ORIFICE-GOVERNOR  
53. 4P-6864 [1] LEVER AS-TERMINAL  
54. 4P-8144 [1] PLUG AS  
55. 2W-4995 [1] SETSCREW-SOCKET  
56. 2W-4305 [1] LINK-CONNECTING  
57. 2W-4318 [1] PISTON-SERVO  
58. 2W-6417 [1] PIN-PISTON LINK  
59. 2F-3219 [1] NUT-ELASTIC STOP  
60. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
61. 7E-0907 [1] SCREW AS-DROOP  
62. 2W-1645 [1] SPRING  
63. 2W-4319 [1] PISTON  
64. 2H-3429 [1] RING-RETAINING  
65. 2W-0283 [1] SPRING-PLUNGER  
66. 4P-6927 [1] VALVE AS-PILOT  
67. 2W-4324 [1] SEAT-ACCUMULATOR  
68. 2W-0144 [2] SHAFT-TERMINAL  
69. 7C-0078 [1] SPRING  
70. 6I-3844 [1] COVER AS-SETTING  
71. 7C-3988 [1] COUPLING AS-DRIVE (SOLID)  
72. 6I-3842 Y [1] PUMP GP-GEROTOR (GOVERNOR)  
73. 2W-0447 [1] LEVER-SETTING  
74. 7C-3900 [1] PLUG  
  5P-7812 [1] SEAL-O-RING  
75. 2W-1476 [1] SPRING  
76. 2W-4619 [1] SEAT  
77. 2W-5916 [1] SCREW (1/4-28X4.5-IN)  
78. 7C-0077 [1] GUIDE AS-ROD  
79. 2W-4622 [1] ROD  
80. 5P-4672 [1] RING-RETAINING  
81. 8H-0707 [8] BOLT (1/4-20X1-IN)  
82. 032-2580 [2] SCREW-TAPPING (1/4-20X1-IN)  
83. 4P-6867 [1] ROD AS-SHUTOFF  
84. 4P-6860 [1] BLOCK-CAM  
85. 4P-6863 [1] LEVER AS  
86. 4P-6861 [1] ROD AS  
87. 2W-1228 [1] NUT-SHUTDOWN ADJUSTMENT (1/4-28-THD)  
88. 3L-6759 [1] WASHER  
89. 6I-3846 [1] BUSHING-GUIDE  
90. 4P-6859 [1] LEVER AS  
91. 2W-5975 [1] SCREW-BOLT (1/4-28X0.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP29620445
 

7W-3333: GOVERNOR GP

7W-3333 GOVERNOR GP -LH
3161-PNEUMATIC-EXTERNAL DROOP ADJUSTMENT
FOR USE WITH OPPOSITE ENGINE ROTATION
AN ATTACHMENT
i00432130 SEBP2962
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
  8N-4266 Y [1] COVER GP-ACCESSORY DRIVE  
  1W-2135 Y [1] DRIVE GP-GOVERNOR  
  1W-6036 Y [1] FASTENER GP-FUEL INJ PUMP  
  7E-8948 [1] GOVERNOR GP  
    -OR-
  6I-0665 Y [1] GOVERNOR GP  
    -OR-
  124-3174 Y [1] GOVERNOR GP  
  1W-5171 Y [1] LINES GP-FUEL RATIO CONTROL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP29620446
 

8N-6712: GOVERNOR GP

8N-6712 GOVERNOR GP
i00413309 SEBP2962
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
  1W-2135 Y [1] DRIVE GP-GOVERNOR  
  1W-6034 Y [1] FASTENER GP-FUEL INJ PUMP  
  7E-8948 [1] GOVERNOR GP  
    -OR-
  6I-0665 Y [1] GOVERNOR GP  
    -OR-
  124-3174 Y [1] GOVERNOR GP  
  1W-2136 Y [1] LINES GP-FUEL RATIO CONTROL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP29620447
 

8N-6714: GOVERNOR GP

8N-6714 GOVERNOR GP -RH
3161 WITH SMOKE LIMITER & HYDRAULIC/PNEUMATIC SHUT-OFF -HYDRAULIC CYLINDER
FOR USE WITH STANDARD & OPPOSITE ENGINE ROTATION
AN ATTACHMENT
i00678963 SEBP2962
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
  1W-2135 Y [1] DRIVE GP-GOVERNOR  
  1W-6034 Y [1] FASTENER GP-FUEL INJ PUMP  
  2W-8580 [1] GOVERNOR GP  
    -OR-
  7E-8949 [1] GOVERNOR GP  
    -OR-
  6I-0664 Y [1] GOVERNOR GP  
    -OR-
  124-3173 Y [1] GOVERNOR GP  
  1W-2136 Y [1] LINES GP-FUEL RATIO CONTROL  
  1W-4862 Y [1] SHUTOFF GP-REMOTE  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP29620448
 

138-6615: GOVERNOR GP-ELECTRONIC

138-6615 GOVERNOR GP-ELECTRONIC -LOAD SHARE
AN ATTACHMENT
i00511123 SEBP2962
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
  4W-8790 [1] BLOCK-FUSE  
  131-5454 [1] CONTROL AS-ELECTRONIC GOVERNOR  
  7T-0037 [1] FUSE (0.75-AMPERE)  
  126-3085 [1] HARNESS AS-ENGINE (GOVERNOR)(EMCP II)  
  126-3103 [1] HARNESS AS-PANEL (GOVERNOR)(EMCP II)  
  4W-5972 [1] KNOB  
  127-9068 [1] POTENTIOMETER (100-OHM, 2-WATT)(GOVERNOR)  
  7C-4550 [1] SEAL (ROTATING SHAFT)  
  5L-5840 [1] WASHER (9.25X16.92X1.83-MM THK)  
 

#SEBP29620449
 

121-2630: INJECTOR GP-FUEL

121-2630 INJECTOR GP-FUEL
PART OF 121-3563 PUMP GP-FUEL INJECTION
AN ATTACHMENT
i00480672 SEBP2962
1212630 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3516 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 194-9584 [2] SEAL-O-RING  
2. 5P-8065 [1] SEAL-O-RING  
 

Information:

Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Remove Plastic Plug From Fuel Transfer Pump
1983/04/27
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing
1984/04/11
Quadrants Improved In Governor Control Groups
1984/07/11
Low Oil Level In Governor Can Cause Erratic Engine RPM
1985/02/01
Adjusting Pneumatic Speed Control For Correct Operation
1985/09/01
Repair Kits Available For Air Actuator Used In Governor Control Groups
1985/09/01
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure
1985/09/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
How To Adjust Arming Pressure On Fuel Ratio Control On Caterpillar 3161 Governor
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Fuel Ratio Control Diaphragms On 3161 Governors
1987/02/01
Improved Fuel Transfer Pump Cover; Weep Hole Moved
1987/03/01
New Washer Used In Fuel Transfer Pump Group
1987/04/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Features And Servicing Of The Various Caterpillar 3161 Governors
1987/06/01
New 3161 Marine Governor Provides Better Low Idle Stability
1989/11/01
New "On Engine" Adjustment Procedure For 3161 Woodward Governor
1990/10/01
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group
1990/12/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
End Clearance Specification Changed For Front Shaft In Fuel Injection Control
1991/10/01
New 3161 Governor With Improved Fuel Limiter
1993/09/01
New Seals Extend Life of Fuel Transfer Pump{1256}
1994/11/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
New Basic Governor Groups (Woodward 3161) Have Self-Contained Oil Supply {1264}
1997/12/16
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
New Hydramechanical Shutoff Groups Reduce The Occurrence Of Improper Shutdowns {1289}
2000/07/01
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Installation of 2W8511 Cam Loading Spring{1264}
Installation of 2W8511 Cam Loading Spring{1264}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Spring Replacement for Type 2 Fuel Injectors{1250}
Spring Replacement for Type 2 Fuel Injectors{1250}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Schedules For The On-Fuel Injection Test Stand{0782, 1264}
Schedules For The On-Fuel Injection Test Stand{0782, 1264}
Testing And Adjusting Of The Woodward 3161 Governors On The Fuel Injection Test Bench{1264}
Testing And Adjusting Of The Woodward 3161 Governors On The Fuel Injection Test Bench{1264}
Service Letter-NACD
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Governor Linkage
3500 Marine Engines
Governor Drive
3500 Marine Engines
Service Letter-China
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Service Letter-Asia
Systems Operation
Systems Operation
CATERPILLAR 3161 GOVERNOR
Electronic Governors
3500 Marine Engines
Governor - 3161
3500 Marine Engines
Service Letter-APD
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Testing and Adjusting
Testing & Adjusting
CATERPILLAR 3161 GOVERNOR
Disassembly and Assembly
Fuel Transfer Pump
3500 MARINE ENGINES
Governor
3500 MARINE ENGINES
Governor Drive
3500 MARINE ENGINES
Fuel Injectors
3500 MARINE ENGINES
Fuel Injectors
3500 MARINE ENGINES
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed{1274,1254,1251}
1983/01/17
Remove Plastic Plug From Fuel Transfer Pump{1256}
1983/04/25
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Special Procedure Needed To Use The 6V3075 Dial Indicator For Fuel Settings{0653,1257}
1984/03/05
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing {1264,1287}
1984/04/02
Quadrants Improved In Governor Control Groups{1265,1264}
1984/05/21
Low Oil Level In Governor Can Cause Erratic Engine RPM{1287}
1985/01/28
Rough Handling Can Move Droop Lever Out Of Position{1264}
1985/08/05
Repair Kits Available For Air Actuator Used In Governor Control Groups{1250}
1985/09/02
Adjusting Pneumatic Speed Control For Correct Operation{1264}
1985/09/02
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure {1100,1251}
1985/09/16
List Of Mechanical Service Meters For Earlier 3500 Series Engines Using Mechanical Service Meters{1286}
1985/09/23
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
How To Adjust Arming (Cocking) Pressure On Fuel Ratio Control On Caterpillar 3161 Governors{1050,1278}
1986/05/26
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Fuel Ratio Control Diaphragms On 3161 Governors{1278}
1987/02/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Transfer Pump Cover; Weep Hole Moved{1255}
1987/03/23
Fuel Injector Trim Bolt {1257}
1987/06/01
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New 3161 Marine Governor Provides Better Low Idle Stability{1264}
1989/11/13
New "On Engine" Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group{1264}
1990/11/19
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New Speed Setting Clutch Group For 3161 Woodward Governors{1265}
1991/05/20
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
New 3161 Governor With Improved Fuel Limiter{1264}
1993/09/20

Caterpillar Parts SIS Catalog 3516 :

GOVERNOR GP
124-3173 GOVERNOR GP
GOVERNOR AS-ELECTRONIC
7E-1232 GOVERNOR AS-ELECTRONIC
GOVERNOR AS-ELECTRONIC
4W-9314 GOVERNOR AS-ELECTRONIC
GOVERNOR AS-ELECTRONIC
4W-9313 GOVERNOR AS-ELECTRONIC
GOVERNOR AS-ELECTRONIC
4P-2788 GOVERNOR AS-ELECTRONIC
FILTER GP-PRIMARY FUEL
8N-6435 FILTER GP-PRIMARY FUEL
FILTER GP-FUEL
7W-9743 FILTER GP-FUEL
FILTER GP-FUEL
7W-9743 FILTER GP-FUEL
1W-5021 GOVERNOR GP
2W-8583 GOVERNOR GP
GOVERNOR GP
6I-0664 GOVERNOR GP
GOVERNOR GP
6I-0665 GOVERNOR GP
7W-3333 GOVERNOR GP
8N-6712 GOVERNOR GP
8N-6714 GOVERNOR GP
138-6615 GOVERNOR GP-ELECTRONIC

Truck sale:

 
719,892 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3516, mobile generator sets, Construction
298,989 
Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3516, Stationary Generator Sets, Construction
800,000 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC