AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1W-2135 DRIVE GP-GOVERNOR PART OF 4W-1534 CONVERSION AR-ENGINE, 1W-5021, 2W-8583, 7W-3333, 8N-6712, 8N-6714 GOVERNOR GP ALSO AN ATTACHMENT 3512


FUEL SYSTEM
GOVERNOR GP
DRIVE GP-TACHOMETER
PUMP GP-FUEL INJECTION
LINES GP-FUEL

INDUSTRIAL ENGINE 3512 INDUSTRIAL ENGINE 65Z
 3512 Industrial Engine 65Z00887-UP SEBP2966 3512 65Z   (1982)

FUEL SYSTEM

GOVERNOR GP
CONTROL & HOUSING GP-GOVERNOR
4P-3783 CONTROL & HOUSING GP-GOVERNOR
7C-7504 CONVERSION GP-GOVERNOR
DRIVE GP-GOVERNOR
1W-2135 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
4W-3151 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
7C-7506 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
8N-0117 DRIVE GP-GOVERNOR
 

#SEBP29660560
 

1W-2135: DRIVE GP-GOVERNOR

1W-2135 DRIVE GP-GOVERNOR
PART OF 4W-1534 CONVERSION AR-ENGINE, 1W-5021, 2W-8583, 7W-3333, 8N-6712, 8N-6714 GOVERNOR GP
ALSO AN ATTACHMENT
i00109160 SEBP2966
1W2135 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-2695 [4] BOLT (5/16-18X0.875-IN)  
  9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 6J-2244 [1] SEAL-O-RING  
3. 7N-5700 [1] ADAPTER  
4. 1W-2133 [1] HOUSING AS-DRIVE  
  1W-9379 [1] BUSHING  
5. 1T-0550 [2] PIN-SPRING  
6. 8C-5197 [1] SEAL-O-RING  
7. 0L-2070 [4] BOLT (3/8-16X2.25-IN)  
8. 5M-2894 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 7N-5695 [1] GASKET  
10. 7N-5696 [1] COVER  
11. 0S-1594 [5] BOLT (3/8-16X1-IN)  
12. 1N-3409 [1] GEAR-BEVEL (42-TEETH)  
13. 8N-9392 [1] COUPLING-GOVERNOR DRIVE  
14. 7N-5701 [1] PINION-GOVERNOR DRIVE (24-TEETH)  
15. 061-9457 [1] SEAL-O-RING  
16. 6V-8260 [1] SEAL-O-RING  
17. 8T-6757 [3] PLUG-PIPE  
18. 7N-5694 B [1] SHIM (0.8-MM THK)  
19. 1A-7669 [2] BOLT (1/2-13X7-IN)  
20. 9S-4182 [2] PLUG (7/16-20-THD)  
  6V-5048 [2] SEAL-O-RING  
21. 6V-3348 [2] SEAL-O-RING  
22. 1D-4588 [2] BOLT (5/8-11X4.25-IN)  
23. 4H-8158 [1] RING-RETAINING  
24. 0S-1621 [2] BOLT (1/2-13X1-IN)  
25. 3P-0647 [4] SEAL-O-RING  
  B   USE AS REQUIRED
 

#SEBP29660561
 

4W-3151: DRIVE GP-GOVERNOR

4W-3151 DRIVE GP-GOVERNOR
PART OF 4W-3152 INSTALLATION GP-GOVERNOR
FOR USE WITH PGEV LOCOMOTIVE GOVERNOR
AN ATTACHMENT
i00378968 SEBP2966
4W3151 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8260 [1] SEAL-O-RING  
2. 061-9457 [1] SEAL-O-RING  
3. 8N-9392 [1] COUPLING-GOVERNOR DRIVE  
4. 4W-0216 [1] GEAR-BEVEL (45-TEETH)  
5. 4W-0215 [1] PINION-GOVERNOR DRIVE  
6. 7N-5700 [1] ADAPTER  
7. 2B-2695 [4] BOLT (5/16-18X0.875-IN)  
8. 6J-2244 [1] SEAL-O-RING  
9. 7N-5694 [1] SHIM (0.8-MM THK)  
10. 1W-3437 [1] HOUSING AS-DRIVE  
  1W-9379 [1] BUSHING  
  1T-0550 [1] PIN-SPRING  
11. 9F-2247 [4] PLUG-PIPE  
12. 9S-4182 [1] PLUG (7/16-20-THD)  
13. 1A-8651 [2] BOLT (5/8-11X4.5-IN)  
14. 0S-1595 [2] BOLT (1/2-13X1.25-IN)  
15. 6V-3348 [2] SEAL-O-RING  
16. 7N-5696 [1] COVER  
17. 7N-5695 [1] GASKET  
18. 0S-1594 [5] BOLT (3/8-16X1-IN)  
19. 5M-2894 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
21. 6L-3401 [1] GASKET-GOVERNOR HOUSING  
22. 9S-8002 [1] PLUG (7/16-20-THD)  
23. 6V-5048 [2] SEAL-O-RING  
24. 1A-0168 [2] BOLT (1/2-13X7.5-IN)  
25. 4H-8158 [1] RING-RETAINING  
26. 0S-1588 [4] BOLT (3/8-16X1.25-IN)  
27. 0S-1591 [6] BOLT (3/8-16X1.5-IN)  
28. 8M-5255 [1] SEAL-O-RING  
29. 4W-3148 [1] ADAPTER AS  
  7N-5244 [1] BUSHING  
30. 5P-0840 [1] SEAL-O-RING  
31. 4W-0162 [1] PLATE  
32. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
33. 0S-1585 [3] BOLT (1/2-13X1.5-IN)  
34. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
 

#SEBP29660562
 

7C-7506: DRIVE GP-GOVERNOR

7C-7506 DRIVE GP-GOVERNOR
PART OF 7C-7504 CONVERSION GP-GOVERNOR
AN ATTACHMENT
i00388492 SEBP2966
7C7506 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1460 [2] BOLT (1/2-13X2-IN)  
2. 1S-0004 [1] SEAL-O-RING  
3. 1N-5999 [3] PLUG-O-RING  
  7J-0204 [3] SEAL-O-RING  
4. 0S-1625 [2] BOLT (5/8-11X2.5-IN)  
5. 7C-7507 [1] HOUSING AS-MOUNTING  
  4K-8603 [2] PLUG-CUP  
6. 3K-8460 [1] PLUG (1/2-20-THD)  
  1J-9671 [1] SEAL-O-RING  
7. 7M-6637 [1] SEAL-O-RING  
8. 2W-7253 [1] COUPLING-DRIVE  
9. 5P-5598 [1] SEAL-O-RING  
 

#SEBP29660563
 

8N-0117: DRIVE GP-GOVERNOR

8N-0117 DRIVE GP-GOVERNOR
PART OF 155-2600 ACTUATOR GP-ELECTRONIC, 8N-0237 GOVERNOR GP-ELECTRIC
AN ATTACHMENT
i00427952 SEBP2966
8N0117 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-8736 [1] HOUSING AS-MOUNTING  
1A. 4K-8603 [2] PLUG-CUP  
2. 6V-8260 [1] SEAL-O-RING  
3. 6V-3348 [1] SEAL-O-RING  
4. 0S-1625 [2] BOLT (5/8-11X2.5-IN)  
5. 1A-1460 [2] BOLT (1/2-13X2-IN)  
6. 1N-5999 [3] PLUG-O-RING  
7. 7J-0204 [3] SEAL-O-RING  
8. 3K-8460 [1] PLUG (1/2-20-THD)  
9. 1J-9671 [1] SEAL-O-RING  
10. 2W-7253 [1] COUPLING-DRIVE  
 

#SEBP29660564
 

4W-5267: DRIVE GP-TACHOMETER

4W-5267 DRIVE GP-TACHOMETER
AN ATTACHMENT
i00379582 SEBP2966
4W5267 DRIVE GP-TACHOMETER Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-2493 [1] ADAPTER AS-DRIVE  
2. 7H-9899 [2] SEAL  
3. 4M-8303 [2] SEAL-O-RING  
4. 1N-3126 [1] COVER AS-CAMSHAFT DRIVE  
5. 1F-4622 [1] BEARING AS-NEEDLE  
6. 4S-7756 [1] SEAL-LIP TYPE  
7. 5M-4987 [2] DOWEL  
8. 1A-2029 [8] BOLT (3/8-16X1.125-IN)  
9. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
11. 7N-4320 [1] GASKET  
12. 4W-4589 [1] SHAFT-TACHOMETER DRIVE  
13. 4W-4587 [1] ADAPTER-TACHOMETER DRIVE  
14. 5P-8248 [1] WASHER-HARD (20X36.5X3.5-MM THK)  
15. 9X-8887 [1] BOLT (3/4-10X3-IN)  
16. 9S-0211 [4] CLAMP-METER  
17. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
18. 7N-4076 [1] COVER  
 

#SEBP29660565
 

1W-6034: FASTENER GP-FUEL INJ PUMP

1W-6034 FASTENER GP-FUEL INJ PUMP -RH
TORQUE CONTROL
PART OF 8N-6712, 8N-6714 GOVERNOR GP
ALSO AN ATTACHMENT
i00091484 SEBP2966
1W6034 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-0032 [1] LEVER-GOVERNOR  
2. 2A-4639 [2] BOLT (3/8-16X1.625-IN)  
3. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 8N-9885 [1] GASKET-COVER  
5. 0S-1594 [2] BOLT (3/8-16X1-IN)  
7. 1W-8434 [1] SUPPORT-GOVERNOR  
8. 7F-5634 [2] BOLT-SPECIAL  
9. 1A-2029 [5] BOLT (3/8-16X1.125-IN)  
12. 2W-9063 [1] WASHER  
13. 4H-1722 [1] SEAL-LIP TYPE  
14. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
15. 9L-9132 [4] WASHER (10.2X25.5X2.5-MM THK)  
16. 1W-6033 [1] COVER  
17. 2B-2694 [1] BOLT (5/16-18X2-IN)  
18. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
19. 1W-6035 [1] LEVER GP-CALIBRATION (GOVERNOR)  
  1W-6032 [1] CAM-CALIBRATION  
  1S-6097 [1] BOLT-LOCKING  
 

#SEBP29660566
 

1W-6036: FASTENER GP-FUEL INJ PUMP

1W-6036 FASTENER GP-FUEL INJ PUMP -LH
TORQUE CONTROL
PART OF 1W-5021, 2W-8583, 7W-3333 GOVERNOR GP
AN ATTACHMENT
i00352703 SEBP2966
1W6036 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
2. 9L-9132 [4] WASHER (10.2X25.5X2.5-MM THK)  
3. 1W-6033 [1] COVER  
4. 0S-1594 [2] BOLT (3/8-16X1-IN)  
6. 2W-9063 [1] WASHER  
7. 4H-1722 [1] SEAL-LIP TYPE  
8. 1W-6037 [1] LEVER GP-CALIBRATION  
  1S-6097 [1] BOLT-LOCKING  
  1W-6032 [1] CAM-CALIBRATION  
9. 2B-2694 [1] BOLT (5/16-18X2-IN)  
10. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
12. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 8N-9885 [1] GASKET-COVER  
15. 2A-4639 [2] BOLT (3/8-16X1.625-IN)  
16. 1W-8434 [1] SUPPORT-GOVERNOR  
17. 8N-0033 [1] LEVER-GOVERNOR  
18. 1A-2029 [5] BOLT (3/8-16X1.125-IN)  
19. 7F-5634 [2] BOLT-SPECIAL  
 

#SEBP29660567
 

4W-3153: FASTENER GP-FUEL INJ PUMP

4W-3153 FASTENER GP-FUEL INJ PUMP
PART OF 4W-3152 INSTALLATION GP-GOVERNOR
AN ATTACHMENT
i00378971 SEBP2966
4W3153 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5757 [1] LEVER AS  
  8N-8160 [1] PIN-RACK ACTUATOR  
2. 7N-9971 [1] BRACKET AS  
  8L-6376 [2] BUSHING  
3. 8N-9885 [1] GASKET-COVER  
4. 2A-4639 [2] BOLT (3/8-16X1.625-IN)  
5. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 5H-1190 [1] SEAL-LIP TYPE  
7. 4W-0968 [1] LEVER  
8. 4B-3388 [1] BOLT (5/16-18X1.125-IN)  
  9S-8752 [1] NUT-FULL (3/8-16-THD)  
9. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
10. 8L-8598 [1] ROD END  
11. 8L-4496 [1] NUT-JAM (5/16-24 LH-THD)  
12. 4W-3584 [1] ROD  
13. 1B-7182 [2] BOLT (5/16-18X1.25-IN)  
14. 2B-2694 [1] BOLT (5/16-18X2-IN)  
15. 5N-2258 [1] BLOCK-GOVERNOR LEVER  
16. 4W-6495 [1] BLOCK  
17. 6B-6684 [2] NUT-FULL (1/2-20-THD)  
18. 4W-6497 [1] ROD-CONTROL  
19. 6V-8186 [1] NUT-FULL (5/16-24-THD)  
20. 6V-8917 [1] ROD END  
21. 4F-2294 [1] NUT-JAM (5/16-24-THD)  
22. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
23. 1W-2458 [1] COVER  
24. 1A-2029 [7] BOLT (3/8-16X1.125-IN)  
25. 7F-5634 [2] BOLT-SPECIAL  
26. 8N-0033 [1] LEVER-GOVERNOR  
27. 0S-1594 [2] BOLT (3/8-16X1-IN)  
 

#SEBP29660568
 

4W-5030: FASTENER GP-FUEL INJ PUMP

4W-5030 FASTENER GP-FUEL INJ PUMP
PART OF 155-2600 ACTUATOR GP-ELECTRONIC, 8N-0237 GOVERNOR GP-ELECTRIC
AN ATTACHMENT
i00379528 SEBP2966
4W5030 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5029 [1] LEVER AS  
2. 8N-8160 [1] PIN-RACK ACTUATOR  
3. 7N-9971 [1] BRACKET AS  
4. 8L-6376 [2] BUSHING  
5. 1W-2458 [1] COVER  
6. 2B-2694 [1] BOLT (5/16-18X2-IN)  
7. 1A-2029 [7] BOLT (3/8-16X1.125-IN)  
8. 4W-5026 [1] LEVER-GOVERNOR  
9. 4B-3388 [1] BOLT (5/16-18X1.125-IN)  
10. 6V-8955 [1] ROD END  
11. 6V-8186 [1] NUT-FULL (5/16-24-THD)  
12. 102-8807 C [1] KIT-CONNECTING PLUG (2-PIN)  
    (INLCUDES PLUG AS & WEDGE)
  8T-8730 [1] SOCKET-CONNECTOR (16-GA TO 18-GA)  
13. 4P-7610 CY [1] SENSOR GP-SPEED (ENGINE)  
14. 0S-1618 [1] BOLT (5/16-18X1-IN)  
15. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
16. 4W-5062 [1] ROD AS  
17. 6V-8186 [1] NUT-FULL (5/16-24-THD)  
18. 6V-8955 [1] ROD END  
19. 5S-0003 [5] NUT (5/16-18-THD)  
20. 3J-1907 [1] SEAL-O-RING  
21. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
22. 4W-5027 [1] LEVER-GOVERNOR CONTROL  
23. 5L-3708 [4] STUD-TAPERLOCK (5/16-18X1.28-IN)  
24. 4W-5369 [1] GASKET  
25. 5H-1190 [1] SEAL-LIP TYPE  
26. 0S-1594 [2] BOLT (3/8-16X1-IN)  
27. 7F-5634 [2] BOLT-SPECIAL  
28. 8N-0032 [1] LEVER-GOVERNOR  
29. 9X-4276 [1] SWITCH AS-PRESSURE (ENGINE OIL)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7781 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
30. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
31. 8N-9885 [1] GASKET-COVER  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP29660569
 

383-8576: FASTENER GP-FUEL LINES

383-8576 FASTENER GP-FUEL LINES
S/N 65Z1596-UP
i04600813 SEBP2966
3838576 FASTENER GP-FUEL LINES Parts scheme
  For full view, you need register

Parts for your 3512 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-0692 [8] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [1] GROMMET  
 

Information:

Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Remove Plastic Plug From Fuel Transfer Pump
1983/04/27
Installation Procedure For Woodward 3161 and UG8 Governors
1983/07/06
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing
1984/04/11
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators
1984/05/16
Quadrants Improved In Governor Control Groups
1984/07/11
Low Oil Level In Governor Can Cause Erratic Engine RPM
1985/02/01
Tighten Bolts To Correct Torque In 3161 Governor
1985/02/01
Adjusting Pneumatic Speed Control For Correct Operation
1985/09/01
Repair Kits Available For Air Actuator Used In Governor Control Groups
1985/09/01
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure
1985/09/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
How To Adjust Arming Pressure On Fuel Ratio Control On Caterpillar 3161 Governor
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Fuel Ratio Control Diaphragms On 3161 Governors
1987/02/01
Improved Fuel Transfer Pump Cover; Weep Hole Moved
1987/03/01
New Washer Used In Fuel Transfer Pump Group
1987/04/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Features And Servicing Of The Various Caterpillar 3161 Governors
1987/06/01
New "On Engine" Adjustment Procedure For 3161 Woodward Governor
1990/10/01
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group
1990/12/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
End Clearance Specification Changed For Front Shaft In Fuel Injection Control
1991/10/01
New Seals Extend Life of Fuel Transfer Pump{1256}
1994/11/01
New Basic Governor Groups (Woodward 3161) Have Self-Contained Oil Supply {1264}
1997/12/16
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
New Hydramechanical Shutoff Groups Reduce The Occurrence Of Improper Shutdowns {1289}
2000/07/01
Operation and Maintenance Manual
Actuator Control Linkage - Lubricate
3500 Industrial and Generator Set Engines
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Installation of 2W8511 Cam Loading Spring{1264}
Installation of 2W8511 Cam Loading Spring{1264}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Spring Replacement for Type 2 Fuel Injectors{1250}
Spring Replacement for Type 2 Fuel Injectors{1250}
3508 and 3512 LOCOMOTIVE ENGINES{1264}
3508 and 3512 LOCOMOTIVE ENGINES{1264}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Schedules For The On-Fuel Injection Test Stand{0782, 1264}
Schedules For The On-Fuel Injection Test Stand{0782, 1264}
Testing And Adjusting Of The Woodward 3161 Governors On The Fuel Injection Test Bench{1264}
Testing And Adjusting Of The Woodward 3161 Governors On The Fuel Injection Test Bench{1264}
Service Letter-NACD
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Governor Linkage
3500 Industrial Engines
Governor Drive
3500 Industrial Engines
Service Letter-China
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Service Letter-Asia
Systems Operation
Systems Operation
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Systems Operation
CATERPILLAR 3161 GOVERNOR
Governor - 3161
3500 Industrial Engines
Service Letter-APD
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Testing and Adjusting
Testing and Adjusting
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Testing & Adjusting
CATERPILLAR 3161 GOVERNOR
Woodward UG8 Governor
3500 Industrial Engines
Troubleshooting
Introduction
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem Index
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 1: Fuel Linkage Has Limited Travel, Binds, Or Takes Excessive Force
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 2: Engine Will Not Start
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 3: Engine Will Not Carry Load (Low Power)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 4: Engine Will Not Decelerate. Engine Will Not Idle.
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 5: Engine Speed Not Constant
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 6: Engine Overspeeds
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 7: Engine Does Not Share Load (For Load Share Units Only)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 8: Engine Does Not Parallel
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Service Procedures
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Disassembly and Assembly
GOVERNOR
3500 INDUSTRIAL ENGINE
GOVERNOR DRIVE
3500 INDUSTRIAL ENGINE
HYDRAMECHANICAL SHUTOFF CONTROL
3500 INDUSTRIAL ENGINE
HYDRAMECHANICAL SHUTOFF DRIVE
3500 INDUSTRIAL ENGINE
Fuel Transfer Pump
3500 INDUSTRIAL ENGINE
Governor
3500 INDUSTRIAL ENGINE
Governor Drive
3500 INDUSTRIAL ENGINE
Fuel Injectors
3500 INDUSTRIAL ENGINE
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed{1274,1254,1251}
1983/01/17
Remove Plastic Plug From Fuel Transfer Pump{1256}
1983/04/25
Installation Procedure For Woodward 3161 and UG8 Governors{1264}
1983/05/30
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New Shafts Used In Fuel Injection Control Groups{1257}
1983/11/21
Special Procedure Needed To Use The 6V3075 Dial Indicator For Fuel Settings{0653,1257}
1984/03/05
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing {1264,1287}
1984/04/02
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23
Quadrants Improved In Governor Control Groups{1265,1264}
1984/05/21
Low Oil Level In Governor Can Cause Erratic Engine RPM{1287}
1985/01/28
Tighten Bolts To Correct Torque In 3161 Governor{1264}
1985/02/04
Rough Handling Can Move Droop Lever Out Of Position{1264}
1985/08/05
Repair Kits Available For Air Actuator Used In Governor Control Groups{1250}
1985/09/02
Adjusting Pneumatic Speed Control For Correct Operation{1264}
1985/09/02
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure {1100,1251}
1985/09/16
List Of Mechanical Service Meters For Earlier 3500 Series Engines Using Mechanical Service Meters{1286}
1985/09/23
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
How To Adjust Arming (Cocking) Pressure On Fuel Ratio Control On Caterpillar 3161 Governors{1050,1278}
1986/05/26
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Fuel Ratio Control Diaphragms On 3161 Governors{1278}
1987/02/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Transfer Pump Cover; Weep Hole Moved{1255}
1987/03/23
New Washer Used In Fuel Transfer Pump Group {1256}
1987/03/30
Fuel Injector Trim Bolt {1257}
1987/06/01
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
Digital Dial Indicator Simplifies Fuel Injection Timing Adjustment{0782,0760,1257,1290}
1988/11/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New "On Engine" Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group{1264}
1990/11/19
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New Speed Setting Clutch Group For 3161 Woodward Governors{1265}
1991/05/20
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

Caterpillar Parts SIS Catalog 3512 :

COOLER GP-FUEL
7E-8090 COOLER GP-FUEL
COOLER GP-FUEL
7E-6682 COOLER GP-FUEL
COOLER GP-FUEL
7E-6681 COOLER GP-FUEL
COOLER GP-FUEL
7E-6634 COOLER GP-FUEL
7C-7504 CONVERSION GP-GOVERNOR
CONTROL GP-GOVERNOR
4P-6538 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
2W-0688 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
2W-0543 CONTROL GP-GOVERNOR
DRIVE GP-GOVERNOR
4W-3151 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
7C-7506 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
8N-0117 DRIVE GP-GOVERNOR
DRIVE GP-TACHOMETER
4W-5267 DRIVE GP-TACHOMETER
FASTENER GP-FUEL INJ PUMP
1W-6034 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
1W-6036 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
4W-3153 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
4W-5030 FASTENER GP-FUEL INJ PUMP

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.