FUEL SYSTEM
FILTER GP-FUELSEPARATOR GP-WATER
TANK GP-FUEL
VALVE GP-CHECK
VALVE GP-SOLENOID
ELECTRICAL AND STARTING SYSTEM
ALARM GPALTERNATOR GP-CHARGING
FUEL SYSTEM
FILTER GP-FUEL
#SEBP29700130
177-0766: PUMP GP-FUEL PRM & PRIM FILTER
177-0766 PUMP GP-FUEL PRM & PRIM FILTER
S/N AKP321-UP
PART OF 156-8049 INSTALLATION AR-ENGINE
S/N AKP321-UP
PART OF 156-8049 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your IT62G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-4961 | [1] | CLAMP-HOSE | |
| 2. | 160-1067 I | [1] | HOSE AS | |
| 3. | 141-8275 | [1] | VALVE-DRAIN (FUEL) | |
| 4. | 152-5478 Y | [1] | PUMP GP-FUEL PRM & WATER SEP | |
| 5. | 3E-7410 | [1] | TEE | |
| 6. | 3J-1907 | [6] | SEAL-O-RING | |
| 7. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 8. | 6V-8397 | [2] | SEAL-O-RING | |
| 9. | 6V-8636 | [2] | CONNECTOR | |
| 10. | 7X-2537 M | [2] | BOLT (M8X1.25X35-MM) | |
| 11. | 9S-4191 | [2] | PLUG (9/16-18-THD) | |
| 12. | 103-2529 E | HOSE (55CM) | ||
| 13. | 3S-2093 | [1] | STRAP-CABLE | |
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29700131
152-5478: PUMP GP-FUEL PRM & WATER SEP
152-5478 PUMP GP-FUEL PRM & WATER SEP
S/N AKP321-UP
WITH BOWL & ELECTRIC PUMP
PART OF 177-0766 PUMP GP-FUEL PRM & PRIM FILTER
FIELD REPLACEMENT ORDER @@@@@149-2683@@@@@
S/N AKP321-UP
WITH BOWL & ELECTRIC PUMP
PART OF 177-0766 PUMP GP-FUEL PRM & PRIM FILTER
FIELD REPLACEMENT ORDER @@@@@149-2683@@@@@
For full view, you need register
Parts for your IT62G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 151-2409 | [1] | ELEMENT-WATER SEPARATOR (PRIMARY) | |
| 2. | 149-2684 | [1] | BASE AS | |
| 3. | 118-8118 | [1] | RING-RETAINING | |
| 4. | 112-9401 | [1] | BOWL AS-WATER COLLECTION | |
| 128-8614 | [1] | KIT-SEAL (WATER SEPARATOR) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 121-4480 | [1] | KIT-WATER BASE (WATER SEPARATOR) | ||
| (INCLUDES CAPS, SEALS, PLUGS & RING) | ||||
| 228-7144 | [1] | KIT-PUMP REPAIR | ||
| (INCLUDES SUB-ASSEMBLY-PLATE, SEAL-O-RING (LARGE), BRACKET-SWITCH MTG., & INSTRUCTIONS) | ||||
#SEBP29700132
149-2683: SEPARATOR GP-WATER
149-2683 SEPARATOR GP-WATER
S/N AKP1-320
PART OF 154-6056 PUMP GP-FUEL PRM & PRIM FILTER
FIELD REPLACEMENT FOR @@@@@152-5478@@@@@
S/N AKP1-320
PART OF 154-6056 PUMP GP-FUEL PRM & PRIM FILTER
FIELD REPLACEMENT FOR @@@@@152-5478@@@@@
For full view, you need register
Parts for your IT62G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 151-2409 | [1] | ELEMENT-WATER SEPARATOR (PRIMARY) | |
| 2. | 149-2684 | [1] | BASE AS | |
| 3. | 118-8118 | [1] | RING-RETAINING | |
| 4. | 118-8119 | [1] | NUT | |
| 5. | 112-9401 | [1] | BOWL AS-WATER COLLECTION | |
| 128-8614 | [1] | KIT-SEAL (WATER SEPARATOR) | ||
| 6. | 149-2685 | [1] | PUMP GP-FUEL PRIMING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 121-4480 | [1] | KIT-WATER BASE (WATER SEPARATOR) | ||
| (INCLUDES NUT-CAP, SEAL-CAP, CAP-HEADER, PLUG-VENT, SEAL-O-RING, RING-RETAINING, SEAL-DUST & PLUG-VOLUME) | ||||
#SEBP29700133
112-6978: TANK GP-FUEL
For full view, you need register
Parts for your IT62G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1H-8306 | [1] | SCREW-PURGE (1/2-20X1.625-IN) | |
| 3. | 7M-8485 | [1] | SEAL-O-RING | |
| 4. | 7X-7700 | [1] | CAP AS-FUEL (LOCKABLE, VENTED) | |
| 7D-7111 | [1] | SEAL-O-RING | ||
| 9X-2205 | [1] | KIT-CAP FILTER (FUEL TANK) | ||
| (INCLUDES FILTER AS, SCREW, GASKETS, & VALVE) | ||||
| 5. | 9P-7121 | [1] | STRAINER-FUEL (FUEL TANK) | |
| 6. | 9S-9334 | [1] | PLUG | |
| 7. | 157-8857 | [1] | SENDER AS-FUEL LEVEL | |
| 6C-3060 | [1] | GASKET | ||
| 138-0444 | [1] | KIT-REPAIR (FUEL LEVEL GAUGE) | ||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 152-2113 | [1] | TANK AS-FUEL | |
| 9. | 7X-2553 M | [5] | BOLT (M16X2X40-MM) | |
| 10. | 8T-4138 M | [6] | BOLT (M6X1X20-MM) | |
| 12. | 9X-8257 | [3] | WASHER (17.5X30X3.5-MM THK) | |
| 13. | 3E-9411 | [2] | WASHER-HARD (17.5X38X6-MM THK) | |
| 14. | 1U-8846 B | [2] | SEALANT-GASKET | |
| 15. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP29700134
129-1101: VALVE GP-CHECK
For full view, you need register
Parts for your IT62G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS#SEBP29700135
129-7707: VALVE GP-SOLENOID
For full view, you need register
Parts for your IT62G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | CARTRIDGE AS | ||
| 2. | 104-3947 | [1] | LOCKNUT (5/8-11-THD) | |
| 3. | 129-7705 | [1] | COIL AS | |
| 1S-9593 | [3] | STRAP-CABLE | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 7T-4515 | [1] | KIT-SEAL | ||
| (INCLUDES 3 SEALS) | ||||
#SEBP29700136
3E-6328: ALARM GP
For full view, you need register
Parts for your IT62G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS#SEBP29700137
107-7977: ALTERNATOR GP-CHARGING
107-7977 ALTERNATOR GP-CHARGING
S/N AKP1-320
24-VOLT, 70-AMPERE
PART OF 156-1820, 162-9490 ALTERNATOR GP-CHARGING
S/N AKP1-320
24-VOLT, 70-AMPERE
PART OF 156-1820, 162-9490 ALTERNATOR GP-CHARGING
For full view, you need register
Parts for your IT62G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1H-3244 | [2] | LOCKWASHER | |
| 2. | 6V-8187 | [1] | NUT (1/4-28-THD) | |
| 3. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 4. | 3T-6354 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 5. | 9L-6770 | [1] | CAP-DUST | |
| 6. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 8. | 4B-2047 | [1] | NUT (10-24-THD) | |
| 9. | 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | |
| 10. | 8F-1434 | [1] | LOCKWASHER | |
| 11. | 3E-5450 | [1] | COVER | |
| 12. | 4B-2043 | [4] | NUT (8-32-THD) | |
| 13. | 9B-7233 | [4] | LOCKWASHER | |
| 14. | 3E-5448 | [1] | CONNECTOR | |
| 15. | 3E-5446 | [1] | CONNECTOR | |
| 16. | 3E-5457 | [1] | DIODE AS | |
| 18. | 7N-9023 | [3] | SCREW AS (8-32X26.9-MM) | |
| 19. | 3E-5460 | [1] | HOLDER AS-BRUSH | |
| 20. | 3E-5459 | [2] | BRUSH AS-ALTERNATOR | |
| 21. | 3N-3718 | [2] | SCREW AS | |
| 22. | 3E-5458 | [1] | CAPACITOR AS-ALTERNATOR | |
| 23. | 4M-5281 | [1] | BOLT (1/4-20X0.75-IN) | |
| 24. | 3E-5454 | [1] | FAN-ALTERNATOR (11-BLADE) | |
| 25. | 3E-5455 | [1] | HOUSING | |
| 26. | 5P-7807 | [1] | BALL BEARING | |
| 27. | 3E-5447 | [1] | PLATE | |
| 28. | 030-9612 | [3] | SCREW-FORMING (10-24X0.5-IN) | |
| 29. | 132-1222 | [1] | ROTOR AS-ALTERNATOR (24-VOLT) | |
| 30. | 132-1223 | [1] | STATOR AS-ALTERNATOR (24-VOLT) | |
| 31. | 132-1224 | [1] | FRAME AS-ALTERNATOR | |
| 32. | 5P-6920 | [1] | BEARING-ROLLER | |
| 33. | 132-1228 | [1] | KIT-ALTERNATOR TERMINAL (BATTERY) | |
| (INCLUDES NUTS, TERMINAL, LOCKWASHER, INSULATOR & ADAPTER) | ||||
| 34. | 132-1230 | [1] | KIT-ALTERNATOR TERMINAL (RELAY) | |
| (INCLUDES INSULATOR, WASHER, NUT & TERMINAL) | ||||
#SEBP29700138
156-1820: ALTERNATOR GP-CHARGING
156-1820 ALTERNATOR GP-CHARGING
S/N AKP1-UP
24 VOLT, 70 AMPERE
PART OF 151-6291 COOLER & MTG AR-AXLE OIL
S/N AKP1-UP
24 VOLT, 70 AMPERE
PART OF 151-6291 COOLER & MTG AR-AXLE OIL
For full view, you need register
Parts for your IT62G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 107-7977 Y | [1] | ALTERNATOR GP-CHARGING | ||
| 7X-0338 | [1] | BOLT (1/2-13X6-IN) | ||
| 8C-4436 | [1] | BOLT (1/2-13X1.375-IN) | ||
| 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | ||
| 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | ||
| 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | ||
| 099-3649 M | [2] | BOLT (M8X1.25X40-MM) | ||
| 7C-1356 | [1] | BRACKET | ||
| 9S-1240 | [1] | BRACKET AS | ||
| 123-7700 | [1] | PLATE | ||
| 148-8860 | [1] | PULLEY-ALTERNATOR | ||
| 101-3120 | [1] | SPACER (10.5X25X20-MM THK) | ||
| 128-1000 | [1] | STRAP | ||
| 9L-1128 | [1] | V-BELT | ||
| 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 148-8298 | [1] | WIRE AS | ||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29700139
162-9490: ALTERNATOR GP-CHARGING
162-9490 ALTERNATOR GP-CHARGING
S/N AKP1-320
24 VOLT, 70 AMPERE
PART OF 156-8049 INSTALLATION AR-ENGINE
S/N AKP1-320
24 VOLT, 70 AMPERE
PART OF 156-8049 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your IT62G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-3872 | [2] | SLEEVE | |
| 2. | 9S-1240 | [1] | BRACKET AS | |
| 1F-0748 | [1] | NUT-WELD (1/2-13-THD) | ||
| 3. | 107-7977 Y | [1] | ALTERNATOR GP-CHARGING | |
| 4. | 123-7700 | [1] | PLATE | |
| 5. | 128-1000 | [1] | STRAP | |
| 6. | 148-8298 | [1] | WIRE AS | |
| 9G-4343 | [1] | TERMINAL-RING (4-GA, 1/4-IN SCREW) | ||
| 7. | [1] | BRACKET | ||
| 8. | 163-5382 | [1] | SPACER (10.5X25X20-MM THK) | |
| 9. | 099-3649 M | [2] | BOLT (M8X1.25X40-MM) | |
| 10. | 7X-0338 | [1] | BOLT (1/2-13X6-IN) | |
| 11. | 5P-2566 | [1] | BOLT (1/2-13X1.5-IN) | |
| 12. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 14. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 15. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
