AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

142-8656 WARNING GP-BACKUP S/N 4YZ1-3999; 5SZ1-3999; 6LZ1-999 Type 1 AN ATTACHMENT 236 SKID STEER LOADER


ELECTRICAL AND STARTING SYSTEM
WARNING GP
WIRING GP
SWITCH GP
WIRING GP

SKID STEER LOADER 236 SKID STEER LOADER 4YZ
 236, 246, 248 Skid Steer Loader 4YZ00001-03999 (MACHINE) POWERED BY 3034 Engine SEBP2972 236 4YZ   (1999)

ELECTRICAL AND STARTING SYSTEM

WARNING GP
WARNING GP-BACKUP
142-8656 WARNING GP-BACKUP
WARNING GP-BACKUP
142-8656 WARNING GP-BACKUP
 

#SEBP29720180
 

142-8656: WARNING GP-BACKUP

142-8656 WARNING GP-BACKUP
S/N 4YZ1-3999; 5SZ1-3999; 6LZ1-999
Type 1
AN ATTACHMENT
i01048991 SEBP2972
1428656 WARNING GP-BACKUP Parts scheme
  For full view, you need register

Parts for your 236 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 168-0295 [1] SWITCH GP-PRESSURE (BACKUP)  
  3E-3365 WEDGE-RECEPTACLE LOCK (2-PIN)  
2. 161-2539 [1] ALARM AS (BACKUP)  
3. 3J-1907 [1] SEAL-O-RING  
4. 6V-7357 M [2] BOLT (M6X1X25-MM)  
5. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 113-8490 [1] FUSE (10-AMPERE)  
  M   METRIC PART
 

#SEBP29720181
 

142-8656: WARNING GP-BACKUP

142-8656 WARNING GP-BACKUP
S/N 4YZ1-3999; 5SZ1-3999; 6LZ1-999
Type 2
AN ATTACHMENT
i01409430 SEBP2972
1428656 WARNING GP-BACKUP Parts scheme
  For full view, you need register

Parts for your 236 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-8490 [1] FUSE (10-AMPERE)  
2. 192-0836 C [1] SWITCH GP-PRESSURE (BACKUP ALARM)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPATCLE AS & WEDGE)
  3J-1907 [1] SEAL-O-RING  
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 161-2539 [1] ALARM AS (BACKUP)(BACKUP)  
4. 6V-7357 M [2] BOLT (M6X1X25-MM)  
5. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP29720182
 

142-9398: WIRING GP-CAB

142-9398 WIRING GP-CAB
S/N 4YZ1-3999; 5SZ1-3999; 6LZ1-999
PART OF 142-9002, 154-3999, 177-9564 CHASSIS AR
i01047876 SEBP2972
1429398 WIRING GP-CAB Parts scheme 1429398 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 236 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2092 E TRIM-EDGE (8CM)  
2. 3S-2093 [6] STRAP-CABLE  
3. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
4. 6I-1418 B [3] SPACER (8.2X12.7X28.7-MM THK)  
5. 7G-1060 [1] STRAP AS-GROUND  
6. 7K-1181 [3] STRAP-CABLE  
7. 8T-9655 [6] MOUNT-ISOLATION (POWER TRAIN)  
8. 9R-7941 [1] SOCKET AS  
  9R-7980 [1] COVER  
9. 113-8490 [8] FUSE (10-AMPERE)  
10. 113-8491 [2] FUSE (15-AMPERE)  
11. 114-4516 [1] BLOCK  
12. 142-8639 [1] HARNESS AS  
  116-4159 [1] BASE  
  112-9609 [1] BLOCK-MICRORELAY  
  124-9636 [1] BLOCK-MINIFUSE  
  112-9610 [1] LOCK-MICRORELAY  
  124-9637 [1] LOCK-MINIFUSE  
  144-1636 [3] PIN-CONNECTOR (14-GA TO 18-GA)  
  110-6845 [1] PLUG AS-CONNECTOR (40-PIN)  
  9X-4391 [1] PLUG AS-CONNECTOR (70-PIN)  
  150-6764 [1] PLUG AS-CONNECTOR (26-PIN)  
  9G-3695 [45] PLUG-SEAL  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INLCUDES RECEPTACLE AS & WEDGE)
  128-4170 [2] TERMINAL AS  
  2L-8069 [3] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  2L-8079 [2] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  5P-4571 [4] TERMINAL-BLADE (14-GA TO 16-GA)  
  112-9611 [4] TERMINAL-BLADE (18-GA TO 20-GA)  
  112-9612 [10] TERMINAL-BLADE  
  116-4160 [3] TERMINAL-BLADE (12-GA TO 14-GA)  
  116-4161 [17] TERMINAL-BLADE (16-GA TO 18-GA)  
  140-9689 [10] TERMINAL-BUS  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  3E-9171 [4] SWITCH-MAGNETIC  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(65-CM)  
  126-1766 [112] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  126-1768 [3] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  8L-8419 [39] DEFLECTOR  
13. 143-1974 [4] RECEPTACLE  
14. 146-4323 [3] RELAY AS (12-VOLT)  
15. 152-4885 [1] BRACKET AS  
16. 154-4233 Y [1] CONTROL GP-INTERLOCK  
17. Y [1] COVER GP-FUSE PANEL  
18. 111-4627 M [4] SCREW-MACHINE (M6X1X30-MM)  
19. 2D-2751 [1] GROMMET  
20. 102-8803 B [1] KIT-RECEPTACLE (3-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
21. 102-8806 B [1] KIT-RECEPTACLE (8-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
22. 4P-7581 [1] CLIP (LADDER)  
23. 4P-8134 [2] CLIP (LADDER)  
24. 5C-7261 M [3] NUT (M8X1.25-THD)  
25. 5C-8312 M [4] NUT (M4X0.7-THD)  
26. 5C-9553 M [6] BOLT (M6X1X16-MM)  
27. 6V-5698 M [2] SCREW-BUTTON HEAD (M4X0.7X10-MM)  
28. 6V-8801 [1] NUT (3/8-16-THD)  
29. 7X-0579 [1] WASHER-HARD (8.8X25.5X2-MM THK)  
30. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4133 M [2] NUT (M10X1.5-THD)  
32. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
33. 9X-1046 M [4] SCREW (M4X0.7X18-MM)  
34. 9X-2042 M [6] SCREW-TRUSS HEAD (M6X1X12-MM)  
35. 9G-3695 [11] PLUG-SEAL  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP29720183
 

142-9107: WIRING GP-ELECTRONIC CONTROL

142-9107 WIRING GP-ELECTRONIC CONTROL
S/N 4YZ1-3999; 5SZ1-3999; 6LZ1-999
PART OF 142-9007, 142-9010 HYDRAULIC AR
ALSO AN ATTACHMENT
i01518515 SEBP2972
1429107 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 236 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-1418 [3] SPACER (8.2X12.7X28.7-MM THK)  
2. 8T-9655 [6] MOUNT-ISOLATION  
3. 113-8490 [1] FUSE (10-AMPERE)  
4. 142-9105 [1] HARNESS AS  
  144-1636 [11] PIN-CONNECTOR (14-GA TO 18-GA)  
  150-6765 [1] PLUG AS-CONNECTOR (26-PIN)  
  159-9322 [1] SEAL-O-RING  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS, WEDGE & INTERFACE SEAL)
  8T-8737 [4] PLUG-SEAL  
  126-1766 [37] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  3S-2093 [1] STRAP-CABLE  
  125-7874 [1] TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  155-2258 [1] WEDGE-PLUG LOCK (12-PIN)  
5. 167-7801 [1] RESISTOR AS (390-OHM, 2-WATT)  
6. 178-2254 CY [1] ELECTRONICS GP-IMPLEMENT (AUXILIARY HYDRAULIC)  
7. 4P-8134 [1] CLIP (LADDER)  
8. 7X-0579 [3] WASHER-HARD (8.8X25.5X2-MM THK)  
9. 8T-4197 M [3] BOLT (M8X1.25X40-MM)  
  7K-1181 BF [3] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29720184
 

142-9396: WIRING GP-ENGINE

142-9396 WIRING GP-ENGINE
S/N 4YZ1-3999; 5SZ1-3999; 6LZ1-999
PART OF 142-9002, 154-3999, 177-9564 CHASSIS AR
i01047732 SEBP2972
1429396 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 236 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7G-1060 [1] STRAP AS-GROUND  
2. 115-1615 [2] RELAY AS (12-VOLT)  
3. 142-7517 [1] CABLE AS-GROUND  
4. 142-9112 [1] HARNESS AS-POWER  
  8T-8799 [3] BOOT (RED)  
  107-3134 [1] HOUSING-CONNECTOR  
  144-1636 [10] PIN-CONNECTOR (14-GA TO 18-GA)  
  9X-1054 [2] PLUG AS-CONNECTOR (4-PIN)  
  100-3320 [1] PLUG AS-CONNECTOR (2-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [2] PLUG-SEAL  
  107-3136 [3] PLUG-SEAL  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  126-1766 [3] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  305-5362 [2] TERMINAL AS (18-GA)  
  3S-2093 [9] STRAP-CABLE  
  1P-0810 [1] TAPE-ELECTRICAL  
  9G-4343 [1] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
  9G-4336 [1] TERMINAL-RING (4-GA, 3/8-IN SCREW)  
  2L-8066 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
  2L-8067 [1] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  128-4190 [2] TERMINAL AS  
  5P-4571 [1] TERMINAL-BLADE (14-GA TO 16-GA)  
  107-3135 [3] TERMINAL (16-GA TO 20-GA)  
  9X-1055 [2] TERMINAL-RECEPTACLE (12-GA)  
  9X-1056 [2] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  100-5041 [4] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  127-7874 E SHEET AS (10-CM)  
5. 115-3073 [1] CLIP AS-CONNECTING  
6. 4P-7581 [1] CLIP (LADDER)  
7. 5C-9553 M [2] BOLT (M6X1X16-MM)  
8. 7X-2621 M [1] BOLT (M10X1.5X12-MM)  
9. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4133 M [1] NUT (M10X1.5-THD)  
11. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 4P-8134 [2] CLIP (LADDER)  
13. 142-8833 [2] SPACER (11X14.3X9-MM THK)  
14. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
15. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
16. 3S-2093 B [6] STRAP-CABLE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP29720185
 

142-9397: WIRING GP-MACHINE

142-9397 WIRING GP-MACHINE
S/N 4YZ1-3999; 5SZ1-3999; 6LZ1-999
PART OF 142-9002, 154-3999, 177-9564 CHASSIS AR
i01047763 SEBP2972
1429397 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your 236 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [17] STRAP-CABLE  
2. 6K-0806 [12] STRAP-CABLE  
3. 7K-1181 [3] STRAP-CABLE  
4. 8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
5. 8M-4963 [1] STRAP AS-GROUND  
6. 115-1615 [1] RELAY AS (12-VOLT)  
7. 118-6365 [1] PLATE AS  
8. 142-7513 [1] CABLE AS-BATTERY (POSITIVE)  
9. 142-8640 [1] HARNESS AS-REAR LIGHTING (DOOR)  
  144-1636 [6] PIN-CONNECTOR (14-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  126-1766 [10] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  2L-8075 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
10. 142-8645 [1] HARNESS AS-PLATFORM  
  173-0702 [1] BOOT  
  159-9853 [1] GROMMET  
  159-5749 Y [1] CONTROL GP-HANDLE  
  158-3770 [1] KIT-PILOT VALVE (LEVER)  
    (INLCUDES NUT, LEVER & PIN SPRING)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9G-3695 [4] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  164-6378 [1] VALVE GP-PILOT  
11. 142-9120 [1] BRACKET AS  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
  7T-1099 [1] LINK  
12. 150-8538 [1] WIRE AS  
13. 150-8539 [1] WIRE AS  
14. 168-7908 Y [1] SWITCH GP-MAGNETIC (12-VOLT)(MAIN POWER RELAY)  
15. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  1H-3244 [2] LOCKWASHER  
16. 155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
17. 155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
18. 102-8802 B [3] KIT-RECEPTACLE (2-PIN)  
19. 102-8804 B [3] KIT-RECEPTACLE (4-PIN)  
20. 102-8805 B [2] KIT-RECEPTACLE (6-PIN)  
21. 102-8806 B [1] KIT-RECEPTACLE (8-PIN)  
22. 102-8801 B [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
23. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
24. 4P-8134 [2] CLIP (LADDER)  
25. 5C-9553 M [6] BOLT (M6X1X16-MM)  
26. 5L-4507 [2] SCREW-MACHINE (10-32X0.875-IN)  
27. 8C-8558 [4] SCREW-LOCK (4-40X0.25-IN)  
28. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4133 M [2] NUT (M10X1.5-THD)  
30. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
31. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
32. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
33. 9H-1958 [1] CIRCUIT BREAKER GP (20-AMPERE)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
34. 9X-1046 M [3] SCREW (M4X0.7X18-MM)  
35. 9G-3695 B [65] PLUG-SEAL  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29720186
 

212-6520: WIRING GP-QUICK COUPLER

212-6520 WIRING GP-QUICK COUPLER
S/N 5SZ1-3999
PART OF 212-4158 COUPLER AR-QUICK
AN ATTACHMENT
i01671003 SEBP2972
2126520 WIRING GP-QUICK COUPLER Parts scheme 2126520 WIRING GP-QUICK COUPLER Parts scheme
  For full view, you need register

Parts for your 236 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 212-6521 [1] SWITCH AS-ROCKER (QUICK COUPLER)  
  111-7899 [1] GASKET  
2. 212-6522 [1] HARNESS AS-WIRING (HYDRAULIC COUPLER)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [3] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  180-9340 [4] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  E   ORDER BY THE CENTIMETER
 

#SEBP29720187
 

159-5784: WIRING GP-WORK TOOL

159-5784 WIRING GP-WORK TOOL
S/N 4YZ1-3999; 5SZ1-3999; 6LZ1-863
PART OF 142-8959 CONTROL GP-PILOT OPERATED HYD
ALSO AN ATTACHMENT
i01065220 SEBP2972
1595784 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 236 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-3542 [1] DIODE GP  
2. 113-8491 [2] FUSE (15-AMPERE)  
3. 142-8633 [1] SWITCH AS-ROCKER (ELECTRIC POWER, WORK TOOL)  
  111-7899 [1] GASKET  
4. 142-9184 [1] BRACKET  
5. 142-9333 [1] HARNESS AS-WORK TOOL  
  156-1458 [1] COVER  
  7T-0093 [5] PIN-CONNECTOR (12-GA TO 14-GA)  
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  9G-3695 [3] PLUG-SEAL  
  156-1460 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  1S-9593 [1] STRAP-CABLE  
6. 146-4323 [2] RELAY AS (12-VOLT)  
7. 159-9495 [1] NUT (1-1/2-18-THD)  
8. 159-9496 [1] LOCKWASHER  
9. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
11. 3S-2093 B [4] STRAP-CABLE  
12. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
13. 3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
14. 9G-3695 [3] PLUG-SEAL  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP29720188
 

187-1258: WIRING GP-WORK TOOL

187-1258 WIRING GP-WORK TOOL
S/N 4YZ1-3999; 5SZ1-3999
FIELD INSTALLATION
i01409850 SEBP2972
1871258 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 236 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [4] STRAP-CABLE  
2. 8T-8737 [3] PLUG-SEAL  
3. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 105-3542 [1] DIODE GP (RECEPTACLE)  
5. 110-8760 [1] STRAP  
6. 113-8491 [2] FUSE (15-AMPERE)(WORK TOOL)  
7. 142-8633 [1] SWITCH AS-ROCKER (ELECTRIC POWER, WORK TOOL)  
  111-7899 [1] GASKET  
8. 142-9184 [1] BRACKET  
9. 142-9333 [1] HARNESS AS-WORK TOOL  
  156-1458 [1] COVER  
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  7T-0093 [5] PIN-CONNECTOR (12-GA TO 14-GA)  
  9G-3695 [3] PLUG-SEAL  
  156-1460 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  1S-9593 [1] STRAP-CABLE  
10. 146-4323 [2] RELAY AS (12-VOLT)(WORK TOOL)  
11. 159-9495 [1] NUT (1-1/2-18-THD)  
12. 159-9496 [1] LOCKWASHER  
13. 193-8339 [1] PLATE  
14. 204-1396 Y [1] CONTROL GP-HANDLE (LH)  
15. 5C-7261 M [2] NUT (M8X1.25-THD)  
16. 8T-0255 [1] PIN-SPRING  
17. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
19. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
20. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29720189
 

193-8353: WIRING GP-WORK TOOL

193-8353 WIRING GP-WORK TOOL
S/N 4YZ1-3999; 5SZ1-3999; 6LZ864-999
PART OF 142-8959, 191-2909, 191-9683 CONTROL GP-PILOT OPERATED HYD
ALSO AN ATTACHMENT
i01437007 SEBP2972
1938353 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 236 SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
2. 3S-2093 [5] STRAP-CABLE  
3. 8T-8737 [3] PLUG-SEAL  
4. 105-3542 [1] DIODE GP  
5. 113-8491 [2] FUSE (15-AMPERE)(WORK TOOL)  
6. 142-8633 [1] SWITCH AS-ROCKER (ELECTRIC POWER, WORK TOOL)  
  111-7899 [1] GASKET  
7. 142-9333 [1] HARNESS AS-WORK TOOL  
  156-1458 [1] COVER  
  7T-0093 [5] PIN-CONNECTOR (12-GA TO 14-GA)  
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  9G-3695 [3] PLUG-SEAL  
  156-1460 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  1S-9593 [1] STRAP-CABLE  
8. 146-4323 [2] RELAY AS (12-VOLT)(WORK TOOL)  
9. 159-9495 [1] NUT (1-1/2-18-THD)  
10. 159-9496 [1] LOCKWASHER  
11. 193-8339 [1] PLATE  
12. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
13. 5C-7261 M [2] NUT (M8X1.25-THD)  
14. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

Information:

Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}

Caterpillar Parts SIS Catalog 236 :

SWITCH GP-TEMPERATURE
164-8388 SWITCH GP-TEMPERATURE
SWITCH GP-PRESSURE
184-1564 SWITCH GP-PRESSURE
SWITCH GP-PRESSURE
171-4613 SWITCH GP-PRESSURE
SWITCH GP-MAGNETIC
168-7908 SWITCH GP-MAGNETIC
STARTING MOTOR GP-ELECTRIC
154-3995 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
144-9955 STARTING MOTOR GP-ELECTRIC
STARTING AID GP
152-4886 STARTING AID GP
SOLENOID GP-SHUTOFF
173-1338 SOLENOID GP-SHUTOFF
WARNING GP-BACKUP
142-8656 WARNING GP-BACKUP
WIRING GP-CAB
142-9398 WIRING GP-CAB
WIRING GP-ELECTRONIC CONTROL
142-9107 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ENGINE
142-9396 WIRING GP-ENGINE
WIRING GP-MACHINE
142-9397 WIRING GP-MACHINE
WIRING GP-QUICK COUPLER
212-6520 WIRING GP-QUICK COUPLER
WIRING GP-WORK TOOL
159-5784 WIRING GP-WORK TOOL
WIRING GP-WORK TOOL
187-1258 WIRING GP-WORK TOOL

Truck sale:

 
 
Caterpillar 236, Kompaktlader, Bau-Und Bergbauausrüstung
- Skid steer loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 236, Kompaktlader, Bau-Und Bergbauausrüstung
27.500 
Caterpillar 236, Kompaktlader, Bau-Und Bergbauausrüstung
- Skid steer loaders
MICHIGAN CAT
Caterpillar 236, Construction
23,200 
Caterpillar 236, Construction
- Skid Steer Loaders
ZIEGLER CAT
Caterpillar 236, Construction
8,500 
Caterpillar 236, Construction
- Skid Steer Loaders
ALTORFER INDUSTRIES
 
17,500 
Caterpillar 236, Construction
- Skid Steer Loaders
WESTERN STATES EQUIPMENT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.