AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

155-0727 PUMP GP-FUEL INJECTION S/N 2JW181-354 ALSO AN ATTACHMENT 3516B GEN SET ENGINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING

GEN SET ENGINE 3516B GEN SET ENGINE 2JW
 3516B High Displacement Generator Set Engine 2JW00001-UP SEBP2979 3516B 2JW   (1999)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
392-0208 INJECTOR GP-FUEL
PUMP GP-FUEL INJECTION
155-0727 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
155-0727 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
155-0727 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
155-0727 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
155-0727 PUMP GP-FUEL INJECTION
 

#SEBP29790370
 

155-0727: PUMP GP-FUEL INJECTION

155-0727 PUMP GP-FUEL INJECTION
S/N 2JW181-354
ALSO AN ATTACHMENT
i01155417 SEBP2979
1550727 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-2580 [1] CLAMP-INJECTOR  
2. 7N-5487 [1] WASHER (12X22X9.5-MM THK)  
3. 162-8810 C [1] INJECTOR GP-FUEL  
  194-9584 [1] SEAL-O-RING  
  9X-7735 [1] SEAL-O-RING  
4. 234-4182 [1] PLUG  
5. 7F-8698 [1] BOLT (7/16-14X3.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP29790371
 

155-0727: PUMP GP-FUEL INJECTION

155-0727 PUMP GP-FUEL INJECTION
S/N 2JW409-422
AN ATTACHMENT
i02044556 SEBP2979
1550727 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-2580 [1] CLAMP-INJECTOR  
2. 7N-5487 [1] WASHER (12X22X9.5-MM THK)  
3. 234-4182 [1] PLUG  
4. 250-1308 [1] INJECTOR GP-FUEL  
4A. 245-4907 [1] SEAL-O-RING  
4B. 245-4908 [1] SEAL-O-RING  
5. 7F-8698 [1] BOLT (7/16-14X3.5-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP29790372
 

155-0727: PUMP GP-FUEL INJECTION

155-0727 PUMP GP-FUEL INJECTION
S/N 2JW423-UP
Type 1
AN ATTACHMENT
i04763181 SEBP2979
1550727 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-2580 [1] CLAMP-INJECTOR  
2. 7N-5487 [1] WASHER (12X22X9.5-MM THK)  
3. 234-4182 [1] PLUG  
4. 386-1760 CY [1] INJECTOR GP-FUEL  
5. 7F-8698 [1] BOLT (7/16-14X3.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP29790373
 

155-0727: PUMP GP-FUEL INJECTION

155-0727 PUMP GP-FUEL INJECTION
S/N 2JW423-UP
Type 2
AN ATTACHMENT
i05205153 SEBP2979
1550727 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-2580 [1] CLAMP-INJECTOR  
2. 7N-5487 [1] WASHER (12X22X9.5-MM THK)  
3. 234-4182 [1] PLUG  
4. 392-0208 CY [1] INJECTOR GP-FUEL  
5. 7F-8698 [1] BOLT (7/16-14X3.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP29790374
 

159-8832: PUMP GP-FUEL INJECTION

159-8832 PUMP GP-FUEL INJECTION
AN ATTACHMENT
i01122370 SEBP2979
1598832 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-2580 [1] CLAMP-INJECTOR  
2. 7N-5487 [1] WASHER (12X22X9.5-MM THK)  
3. 172-4676 [1] INJECTOR GP-FUEL  
  194-9584 [1] SEAL-O-RING  
  9X-7735 [1] SEAL-O-RING  
4. 234-4182 [1] PLUG  
5. 7F-8698 [1] BOLT (7/16-14X3.5-IN)  
 

#SEBP29790375
 

159-8832: PUMP GP-FUEL INJECTION

159-8832 PUMP GP-FUEL INJECTION
S/N 2JW355-422
i02044554 SEBP2979
1598832 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-2580 [1] CLAMP-INJECTOR  
2. 7N-5487 [1] WASHER (12X22X9.5-MM THK)  
3. 234-4182 [1] PLUG  
4. 250-1302 [1] INJECTOR GP-FUEL  
4A. 245-4907 [1] SEAL-O-RING  
4B. 245-4908 [1] SEAL-O-RING  
5. 7F-8698 [1] BOLT (7/16-14X3.5-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP29790376
 

159-8832: PUMP GP-FUEL INJECTION

159-8832 PUMP GP-FUEL INJECTION
S/N 2JW423-423
i04763561 SEBP2979
1598832 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-2580 [1] CLAMP-INJECTOR  
2. 7N-5487 [1] WASHER (12X22X9.5-MM THK)  
3. 234-4182 [1] PLUG  
4. 386-1754 CY [1] INJECTOR GP-FUEL  
5. 7F-8698 [1] BOLT (7/16-14X3.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP29790377
 

159-8832: PUMP GP-FUEL INJECTION

159-8832 PUMP GP-FUEL INJECTION
S/N 2JW423-UP
i05155181 SEBP2979
1598832 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-2580 [1] CLAMP-INJECTOR  
2. 7N-5487 [1] WASHER (12X22X9.5-MM THK)  
3. 234-4182 [1] PLUG  
4. 392-0202 CY [1] INJECTOR GP-FUEL  
5. 7F-8698 [1] BOLT (7/16-14X3.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP29790378
 

115-1063: PUMP GP-FUEL PRIMING

115-1063 PUMP GP-FUEL PRIMING -RH
AN ATTACHMENT
i00489851 SEBP2979
1151063 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-0693 [10] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [2] GROMMET  
2. 7N-8599 Y [1] PUMP GP-FUEL PRIMING  
3. 9N-1752 [1] SPRING  
4. 237-2715 [1] TUBE AS  
5. 237-2716 [1] TUBE AS  
6. 250-1496 [1] ELBOW  
7. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
8. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
9. 1P-7625 [1] ELBOW  
10. 2H-9523 [1] GROMMET  
11. 3J-1907 [1] SEAL-O-RING  
12. 3K-0360 [1] SEAL-O-RING  
13. 4B-9782 [1] BALL  
14. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 6V-4362 [1] CONNECTOR  
16. 6V-5049 [1] SEAL-O-RING  
17. 8N-3480 [1] CLIP  
18. 9S-4191 [1] PLUG (9/16-18-THD)  
19. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP29790379
 

115-1065: PUMP GP-FUEL PRIMING

115-1065 PUMP GP-FUEL PRIMING -LH
AN ATTACHMENT
i00489857 SEBP2979
1151065 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-0692 [4] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [1] GROMMET  
2. 4P-0693 [10] CLAMP AS  
    (EACH INCLUDES)
  108-1434 [2] GROMMET  
3. 7N-8599 Y [1] PUMP GP-FUEL PRIMING (BASIC)  
4. 9N-1752 [1] SPRING  
5. 237-2716 [1] TUBE AS  
6. 237-2718 [1] TUBE AS  
7. 250-1496 [1] ELBOW  
8. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
9. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
10. 0T-0065 [2] BOLT (3/8-16X3.5-IN)  
11. 1P-7625 [1] ELBOW  
12. 2H-9523 [1] GROMMET  
13. 3J-1907 [1] SEAL-O-RING  
14. 3K-0360 [1] SEAL-O-RING  
15. 4B-9782 [1] BALL  
16. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 6V-4362 [1] CONNECTOR  
18. 6V-5049 [1] SEAL-O-RING  
19. 7K-3377 [2] PIPE  
20. 8N-3480 [1] CLIP  
21. 9S-4191 [1] PLUG (9/16-18-THD)  
22. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly{1408}
1999/09/01
Be Sure To Tighten The Locknut For The Adjusting Screw For The Fuel Injector Rocker Arm To The Correct Torque {1290}
2001/05/01
Addition to Specifications "Valve Mechanism" {1123}
2003/01/01
Correct Lash Setting for the Fuel Injector {1290}
2003/10/01
Improved Fuel Injectors {1251, 1254, 1290}
2004/09/01
New Injector Seals are Now Used {1290}
2005/01/31
Service Life of Unit Injectors {1251, 1290}
2007/01/01
New Fuel Injectors Are Used on Certain 3500 Engines {1251, 1290}
2012/06/08
New Sequence for Adjusting the Fuel Injectors in 3516, 3516B, and 3516C Engines {1290}
2013/01/03
Operation and Maintenance Manual
Fuel Injector - Inspect/Adjust
3500B High Displacement Generator Set Engines
Special Instruction
Performing a Multiple Cylinder Cutout Test {1290}
Performing a Multiple Cylinder Cutout Test {1290}
Worksheet for the Diagnosis of Fuel Injectors{1254, 1290}
Worksheet for the Diagnosis of Fuel Injectors{1254, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Technical Information Bulletin
Fuel Dilution Of The Oil In 3500B Engines
Fuel Dilution Of The Oil In 3500B Engines
Specifications
Fuel Injector Mechanism
3512B and 3516B Engines
Fuel Injector
3512B and 3516B Engines
Systems Operation
Fuel Injector
3500B High Displacement Engines
Information Release Memo
CAT REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN 3406 AND 3500 ELECTRONIC UNIT INJECTORS
CAT REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN 3406 AND 3500 ELECTRONIC UNIT INJECTORS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE TO CAT� REMAN ELECTRONIC INJECTORS
APPEARANCE CHANGE TO CAT� REMAN ELECTRONIC INJECTORS
Testing and Adjusting
Checking Engine Cylinders with an Electronic Service Tool
3500B High Displacement Engines
Fuel Injector Trim Code
3500B High Displacement Engines
Fuel Injector Adjustment
3500B High Displacement Engines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3500B High Displacement Engines
Checking Engine Cylinders
3500B High Displacement Engines
Troubleshooting
MID 036 - CID 0001 - FMI 05 Injector Cylinder 1 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0001 - FMI 06 Injector Cylinder 1 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0002 - FMI 05 Injector Cylinder 2 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0002 - FMI 06 Injector Cylinder 2 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0003 - FMI 05 Injector Cylinder 3 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0003 - FMI 06 Injector Cylinder 3 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0004 - FMI 05 Injector Cylinder 4 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0004 - FMI 06 Injector Cylinder 4 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0005 - FMI 05 Injector Cylinder 5 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0005 - FMI 06 Injector Cylinder 5 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0006 - FMI 05 Injector Cylinder 6 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0006 - FMI 06 Injector Cylinder 6 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0007 - FMI 05 Injector Cylinder 7 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0007 - FMI 06 Injector Cylinder 7 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0008 - FMI 05 Injector Cylinder 8 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0008 - FMI 06 Injector Cylinder 8 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0009 - FMI 06 Injector Cylinder 9 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0013 - FMI 05 Injector Cylinder 13 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0013 - FMI 06 Injector Cylinder 13 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0014 - FMI 05 Injector Cylinder 14 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0014 - FMI 06 Injector Cylinder 14 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0015 - FMI 06 Injector Cylinder 15 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0015 - FMI 05 Injector Cylinder 15 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0016 - FMI 06 Injector Cylinder 16 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0016 - FMI 05 Injector Cylinder 16 open circuit
3500B Engines and 3500 Engines with EUI Option
Injector Solenoids
3500B Engines and 3500 Engines with EUI Option
Noise Coming from Cylinder
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0009 - FMI 05 Injector Cylinder 9 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0010 - FMI 05 Injector Cylinder 10 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0010 - FMI 06 Injector Cylinder 10 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0011 - FMI 05 Injector Cylinder 11 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0011 - FMI 06 Injector Cylinder 11 short
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0012 - FMI 05 Injector Cylinder 12 open circuit
3500B Engines and 3500 Engines with EUI Option
MID 036 - CID 0012 - FMI 06 Injector Cylinder 12 short
3500B Engines and 3500 Engines with EUI Option
Disassembly and Assembly
Electronic Unit Injector - Install
3500B Engines
Electronic Unit Injector - Remove
3500B Engines
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog 3516B :

PUMP GP-FUEL INJECTION
155-0727 PUMP GP-FUEL INJECTION
MANIFOLD GP-FUEL
156-9756 MANIFOLD GP-FUEL
MANIFOLD GP-FUEL
156-9755 MANIFOLD GP-FUEL
LINES GP-FUEL INJECTION
101-1246 LINES GP-FUEL INJECTION
LINES GP-FLEXIBLE FUEL
5N-2438 LINES GP-FLEXIBLE FUEL
INJECTOR GP-FUEL
392-0208 INJECTOR GP-FUEL
INJECTOR GP-FUEL
392-0202 INJECTOR GP-FUEL
INJECTOR GP-FUEL
386-1760 INJECTOR GP-FUEL
PUMP GP-FUEL INJECTION
155-0727 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
155-0727 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
155-0727 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
159-8832 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
159-8832 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
159-8832 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
159-8832 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
115-1063 PUMP GP-FUEL PRIMING

Truck sale:

Caterpillar 3516B
 
Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.
 
500,000 
Caterpillar 3516B, Stationary Generator Sets, Construction
- Stationary Generator Sets
FINNING CHILE S.A.
 
350,000 
Caterpillar 3516B, Stationary Generator Sets, Construction


Caterpillar 3516B
 
Caterpillar 3516B
- Industrial engines
RING POWER CORP.
Caterpillar 3516B
 
Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.