POWER TRAIN
CONTROL GP-TRANSMISSION HYDCOOLER GP
COUPLING GP
DRIVE GP-FINAL
POWER TRAIN
CONTROL GP-TRANSMISSION HYD
#SEBP29840360
207-2373: CONTROL GP-TRANSMISSION HYD
207-2373 CONTROL GP-TRANSMISSION HYD
S/N LAC1-932; TAC1-994
PART OF 219-2620, 219-2623 TRANSMISSION AR
S/N LAC1-932; TAC1-994
PART OF 219-2620, 219-2623 TRANSMISSION AR
For full view, you need register
Parts for your D6R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5120 | [2] | STRIP | |
| 2. | 6P-4977 | [2] | SLEEVE | |
| 3. | 104-6729 | [1] | RETAINER | |
| 4. | 104-6730 | [1] | GASKET | |
| 5. | 144-7871 | [1] | HARNESS AS-SENSOR (TRANSMISSION SPEED) | |
| 144-7872 | [1] | HARNESS AS-SENSOR (TRANSMISSION SPEED) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 4P-7581 | [1] | CLIP (LADDER) | ||
| 6. | 204-6501 | [1] | ELBOW | |
| 7. | 205-0076 Y | [1] | VALVE GP-RELIEF (TRANSMISSION HYDRAULIC CONTROL) | |
| 8. | 205-4626 | [1] | HARNESS AS-SOLENOID (TRANSMISSION) | |
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 3S-2093 | [5] | STRAP-CABLE | ||
| 4P-7581 | [4] | CLIP (LADDER) | ||
| 9. | 205-7205 | [5] | SLEEVE | |
| 10. | 220-4324 Y | [5] | VALVE GP-MODULATING (TRANSMISSION CLUTCH) | |
| 11. | 031-0218 | [2] | BOLT-LOCKING (3/8-16X0.5-IN)(3/8-16X.5IN) | |
| 12. | 0L-1352 | [3] | BOLT (3/8-16X3.25-IN) | |
| 13. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 14. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 15. | 1D-4540 | [10] | BOLT (5/16-18X2.75-IN) | |
| 16. | 2H-3932 | [2] | SEAL-O-RING | |
| 17. | 5F-4899 | [4] | BOLT (3/8-16X5.5-IN) | |
| 18. | 5M-2894 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 19. | 8M-4432 | [4] | SEAL-O-RING | |
| 20. | 8M-8157 | [10] | SEAL-O-RING | |
| 21. | 9M-1974 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 22. | 125-5341 | [1] | NUT (1-1/4-18-THD) | |
| 23. | 6J-2419 | [1] | SEAL-O-RING | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29840361
241-8129: CONTROL GP-TRANSMISSION HYD
241-8129 CONTROL GP-TRANSMISSION HYD
S/N LAC933-UP; TAC995-UP
PART OF 219-2620, 219-2623 TRANSMISSION AR
S/N LAC933-UP; TAC995-UP
PART OF 219-2620, 219-2623 TRANSMISSION AR
For full view, you need register
Parts for your D6R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5120 | [2] | STRIP | |
| 2. | 6P-4977 | [2] | SLEEVE | |
| 3. | 104-6729 | [1] | RETAINER | |
| 4. | 104-6730 | [1] | GASKET | |
| 5. | 204-6501 | [1] | ELBOW | |
| 6. | 205-0076 Y | [1] | VALVE GP-RELIEF (TRANSMISSION HYDRAULIC CONTROL) | |
| 7. | 205-4626 | [1] | HARNESS AS-SOLENOID (TRANSMISSION) | |
| 3S-2093 | [5] | STRAP-CABLE | ||
| 4P-7581 | [4] | CLIP (LADDER) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6J-2419 | [1] | SEAL-O-RING | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(53-CM) | |||
| 186-3735 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 186-3736 | [10] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8. | 205-7205 | [5] | SLEEVE | |
| 9. | 220-4324 Y | [5] | VALVE GP-MODULATING (TRANSMISSION CLUTCH) | |
| 10. | 241-8424 | [1] | HARNESS AS-SENSOR (TRANSMISSION OUTPUT SPEED) | |
| 3S-2093 | [1] | STRAP-CABLE | ||
| 4P-7581 | [1] | CLIP (LADDER) | ||
| 186-3736 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 11. | 031-0218 | [2] | BOLT-LOCKING (3/8-16X0.5-IN) | |
| 12. | 0L-1352 | [3] | BOLT (3/8-16X3.25-IN) | |
| 13. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 14. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 15. | 1D-4540 | [10] | BOLT (5/16-18X2.75-IN) | |
| 16. | 2H-3932 | [2] | SEAL-O-RING | |
| 17. | 5F-4899 | [4] | BOLT (3/8-16X5.5-IN) | |
| 18. | 5M-2894 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 19. | 8M-4432 | [4] | SEAL-O-RING | |
| 20. | 8M-8157 | [10] | SEAL-O-RING | |
| 21. | 9M-1974 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 22. | 125-5341 | [1] | NUT (1-1/4-18-THD) | |
| 23. | 6J-2419 | [1] | SEAL-O-RING | |
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29840362
157-0133: COOLER GP-TRANSMISSION OIL
157-0133 COOLER GP-TRANSMISSION OIL
S/N 4ZF2708-UP
PART OF 166-0273, 169-3791, 176-5509, 176-9269 ENGINE AR
FOR USE WITH @@@@@ 4N-0730@@@@@
ALSO AN ATTACHMENT
S/N 4ZF2708-UP
PART OF 166-0273, 169-3791, 176-5509, 176-9269 ENGINE AR
FOR USE WITH @@@@@ 4N-0730@@@@@
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D6R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2S-0795 | [2] | GASKET | |
| 2. | 6F-7062 | [1] | WASHER (12.7X19.05X1.83-MM THK) | |
| 3. | 8M-9307 | [1] | PLUG | |
| 4. | 8S-4304 | [1] | BONNET-XMSN OIL COOLER | |
| 5. | 127-5537 | [1] | CORE AS | |
| 6. | 167-0160 | [1] | BRACKET | |
| 7. | 180-3907 | [1] | SEAL-INTEGRAL | |
| 8. | 180-8420 | [1] | BONNET | |
| 9. | 0S-1595 | [4] | BOLT (1/2-13X1.25-IN) | |
| 10. | 3J-1907 | [1] | SEAL-O-RING | |
| 11. | 3K-0360 | [1] | SEAL-O-RING | |
| 12. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 6V-1819 M | [1] | BOLT (M10X1.5X100-MM) | |
| 14. | 6V-3668 M | [2] | BOLT (M12X1.75X30-MM) | |
| 15. | 7M-8485 | [1] | SEAL-O-RING | |
| 16. | 8T-5030 M | [2] | BOLT (M10X1.5X120-MM) | |
| 17. | 8T-7950 M | [1] | BOLT (M10X1.5X180-MM) | |
| 18. | 9S-4181 | [1] | PLUG (1-5/16-12-THD) | |
| 19. | 9S-4185 | [1] | PLUG (3/4-16-THD) | |
| 20. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
| 21. | 9X-8873 | [2] | BOLT (1/2-13X2.25-IN) | |
| 22. | 9X-8877 | [6] | BOLT (1/2-13X5-IN) | |
| 23. | 198-3462 | [1] | DIVERTER | |
| 24. | 8T-6761 | [1] | PLUG-PIPE (1-11-1/2 NPT THD) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP29840363
157-0133: COOLER GP-TRANSMISSION OIL
157-0133 COOLER GP-TRANSMISSION OIL
S/N 4ZF2708-UP
PART OF 176-5509, 176-9269 ENGINE AR
FOR USE WITH @@@@@ 4N-0730@@@@@
AN ATTACHMENT
S/N 4ZF2708-UP
PART OF 176-5509, 176-9269 ENGINE AR
FOR USE WITH @@@@@ 4N-0730@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D6R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2S-0795 | [2] | GASKET | |
| 2. | 6F-7062 | [1] | WASHER (12.7X19.05X1.83-MM THK) | |
| 3. | 8M-9307 | [1] | PLUG | |
| 4. | 8S-4304 | [1] | BONNET-XMSN OIL COOLER | |
| 5. | 127-5537 | [1] | CORE AS | |
| 6. | 167-0160 | [1] | BRACKET | |
| 7. | 180-3907 | [1] | SEAL-INTEGRAL | |
| 8. | 180-8420 | [1] | BONNET | |
| 9. | 0S-1595 | [4] | BOLT (1/2-13X1.25-IN) | |
| 12. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 6V-1819 M | [1] | BOLT (M10X1.5X100-MM) | |
| 14. | 6V-3668 M | [2] | BOLT (M12X1.75X30-MM) | |
| 16. | 8T-5030 M | [2] | BOLT (M10X1.5X120-MM) | |
| 17. | 8T-7950 M | [1] | BOLT (M10X1.5X180-MM) | |
| 18. | 164-4180 C | [1] | PLUG AS | |
| 7M-8485 | [1] | SEAL-O-RING | ||
| 9S-4181 | [1] | PLUG (1-5/16-12-THD) | ||
| 19. | 148-8411 C | [1] | PLUG AS | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 9S-4185 | [1] | PLUG (3/4-16-THD) | ||
| 20. | 148-8407 C | [1] | PLUG AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 21. | 9X-8873 | [2] | BOLT (1/2-13X2.25-IN) | |
| 22. | 9X-8877 | [6] | BOLT (1/2-13X5-IN) | |
| 23. | 198-3462 | [1] | DIVERTER | |
| 24. | 8T-6761 | [1] | PLUG-PIPE (1-11-1/2 NPT THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP29840364
157-0133: COOLER GP-TRANSMISSION OIL
157-0133 COOLER GP-TRANSMISSION OIL
S/N 4ZF26127-UP; SAN1151-UP; 7AZ1-UP
PART OF 166-0273, 169-3791, 176-5509, 176-9269 ENGINE AR
FOR USE WITH @@@@@ 4N-0730@@@@@
ALSO AN ATTACHMENT
S/N 4ZF26127-UP; SAN1151-UP; 7AZ1-UP
PART OF 166-0273, 169-3791, 176-5509, 176-9269 ENGINE AR
FOR USE WITH @@@@@ 4N-0730@@@@@
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D6R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2S-0795 | [2] | GASKET | |
| 2. | 6F-7062 | [1] | WASHER (12.7X19.05X1.83-MM THK) | |
| 3. | 8M-9307 | [1] | PLUG | |
| 4. | 8S-4304 | [1] | BONNET-XMSN OIL COOLER | |
| 5. | 127-5537 | [1] | CORE AS | |
| 6. | 167-0160 | [1] | BRACKET | |
| 7. | 180-3907 | [1] | SEAL-INTEGRAL | |
| 8. | 180-8420 | [1] | BONNET | |
| 9. | 0S-1595 | [4] | BOLT (1/2-13X1.25-IN) | |
| 12. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 6V-1819 M | [1] | BOLT (M10X1.5X100-MM) | |
| 14. | 6V-3668 M | [2] | BOLT (M12X1.75X30-MM) | |
| 16. | 8T-5030 M | [2] | BOLT (M10X1.5X120-MM) | |
| 17. | 8T-7950 M | [1] | BOLT (M10X1.5X180-MM) | |
| 18. | 398-5614 C | [1] | PLUG AS | |
| 6V-5064 | [1] | SEAL-O-RING | ||
| 360-3684 | [1] | PLUG | ||
| 19. | 396-0405 C | [1] | PLUG AS | |
| 6V-6609 | [1] | SEAL-O-RING | ||
| 360-3680 | [1] | PLUG | ||
| 20. | 396-0403 C | [1] | PLUG AS | |
| 6V-3250 | [1] | SEAL-O-RING | ||
| 360-3679 | [1] | PLUG-CONNECTOR (9/16-18-THD) | ||
| 21. | 9X-8873 | [2] | BOLT (1/2-13X2.25-IN) | |
| 22. | 9X-8877 | [6] | BOLT (1/2-13X5-IN) | |
| 23. | 198-3462 | [1] | DIVERTER | |
| 24. | 8T-6761 | [1] | PLUG-PIPE (1-11-1/2 NPT THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP29840365
238-1116: COOLER GP-TRANSMISSION OIL
238-1116 COOLER GP-TRANSMISSION OIL
S/N 4ZF13078-UP; SAN1151-UP; 7AZ1-UP
PART OF 254-5750, 254-5751, 254-5752, 254-5753 ENGINE AR
ALSO AN ATTACHMENT
S/N 4ZF13078-UP; SAN1151-UP; 7AZ1-UP
PART OF 254-5750, 254-5751, 254-5752, 254-5753 ENGINE AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D6R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2S-0795 | [2] | GASKET | |
| 2. | 6F-7062 | [1] | WASHER (12.7X19.05X1.83-MM THK) | |
| 3. | 8M-9307 | [1] | PLUG (TRANSMISSION OIL COOLER) | |
| 4. | 8S-4304 | [1] | BONNET-XMSN OIL COOLER | |
| 5. | 180-3907 | [1] | SEAL-INTEGRAL | |
| 6. | 187-3523 | [1] | CORE AS-OIL COOLER (TRANSMISSION) | |
| 6A. | 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | |
| 7. | 198-3462 | [1] | DIVERTER | |
| 8. | 238-1117 | [1] | BONNET | |
| 9. | 392-0818 | [1] | PLUG AS | |
| 6V-6609 | [1] | SEAL-O-RING | ||
| 360-3693 | [1] | PLUG (3/4-16-THD) | ||
| 10. | 348-5792 | [1] | BRACKET | |
| 11. | 398-5599 | [1] | PLUG AS | |
| 6V-3250 | [1] | SEAL-O-RING | ||
| 360-3692 | [1] | PLUG | ||
| 12. | 398-5614 | [1] | PLUG AS | |
| 6V-5064 | [1] | SEAL-O-RING | ||
| 360-3684 | [1] | PLUG | ||
| 15. | 6V-3668 M | [4] | BOLT (M12X1.75X30-MM) | |
| 16. | 6V-3823 M | [2] | BOLT (M12X1.75X60-MM) | |
| 17. | 6V-5696 M | [6] | BOLT (M12X1.75X80-MM) | |
| 18. | 6V-8675 M | [1] | BOLT (M12X1.75X35-MM) | |
| 19. | 7D-1649 | [3] | WASHER-HARD (13.5X32X5-MM THK) | |
| 20. | 7X-2543 M | [2] | BOLT (M10X1.5X120-MM) | |
| 22. | 8T-6761 | [1] | PLUG-PIPE (1-11-1/2 NPT THD) | |
| 23. | 8T-6854 M | [4] | BOLT (M10X1.5X200-MM) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP29840366
198-1871: COUPLING & GUARD GP
198-1871 COUPLING & GUARD GP
S/N AEM1-UP; AGM1-UP
PART OF 164-4792, 164-4794 POWER TRAIN AR
S/N AEM1-UP; AGM1-UP
PART OF 164-4792, 164-4794 POWER TRAIN AR
For full view, you need register
Parts for your D6R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-4880 | [2] | COUPLING AS | |
| (EACH INCLUDES) | ||||
| 3E-4876 | [3] | BUSHING AS (THREADED) | ||
| 6Y-2130 | [3] | BUSHING AS (NON-THREADED) | ||
| 2. | 198-1883 | [1] | TUBE AS | |
| 3. | 3W-8370 | [1] | GUARD AS | |
| 1F-0750 | [2] | NUT-WELD (3/8-16-THD) | ||
| 4. | 174-5366 | [1] | GUARD AS | |
| 1F-0750 | [2] | NUT-WELD (3/8-16-THD) | ||
| 7T-1099 | [1] | LINK | ||
| 5. | 172-5239 | [1] | BRACKET AS | |
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 6. | 5S-7379 | [8] | BOLT (3/8-16X0.875-IN) | |
| 7. | 5S-7383 | [6] | BOLT (3/8-16X1.75-IN) | |
| 8. | 8T-2501 | [6] | BOLT (3/8-16X2-IN) | |
| 9. | 8T-4896 | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 10. | 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
#SEBP29840367
180-7902: DRIVE GP-FINAL
180-7902 DRIVE GP-FINAL
S/N AEM1-UP; AGM1-UP
PART OF 138-1849 GUARD AR-FINAL DRIVE
AN ATTACHMENT
S/N AEM1-UP; AGM1-UP
PART OF 138-1849 GUARD AR-FINAL DRIVE
AN ATTACHMENT
For full view, you need register
Parts for your D6R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 180-7910 | [1] | HUB AS | |
| 137-4488 | [1] | GUARD | ||
| 2. | 6V-0329 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 3. | 6V-0330 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 4. | 9G-9181 | [1] | RETAINER | |
| 5. | 8G-8844 | [1] | RING-LOCK | |
| 6. | 9G-8639 | [1] | GEAR-RING (94-TEETH) | |
| 7. | 8T-9399 | [33] | BOLT (3/4-10X2.25-IN) | |
| 8. | 8T-4994 | [33] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 9. | 9G-8638 | [3] | GEAR-PLANETARY (40-TEETH) | |
| 10. | 1B-3978 | [6] | CUP-BEARING (TAPERED ROLLER) | |
| 11. | 156-4593 | [6] | CONE-BEARING (TAPERED ROLLER) | |
| 12. | 9G-9183 | [3] | SHAFT | |
| 13. | 7X-0346 | [3] | BOLT (5/8-11X2-IN) | |
| 14. | 180-7907 | [1] | SPINDLE AS | |
| 137-4489 | [1] | GUARD | ||
| 15. | 2P-3696 | [3] | RETAINER | |
| 16. | 2B-0947 | [10] | BOLT (1/2-13X2.25-IN) | |
| 17. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 18. | 8T-4896 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 19. | 8G-8845 | [1] | COVER | |
| 20. | 2R-0098 | [1] | SEAL-O-RING | |
| 21. | 188-0908 CY | [1] | SEGMENT GP-SPROCKET | |
| 22. | 1P-9005 | [1] | SEAL-O-RING | |
| 23. | 2S-4078 | [1] | SEAL-O-RING | |
| 24. | 6V-0439 | [1] | PLUG-MAGNETIC (FINAL DRIVE, OIL FILL) | |
| 25. | 9G-9175 | [1] | CARRIER | |
| 26. | 9S-4185 | [1] | PLUG (3/4-16-THD)(FINAL DRIVE, OIL DRAIN) | |
| 27. | 3K-0360 | [1] | SEAL-O-RING | |
| 28. | 9H-3360 | [1] | SEAL-O-RING | |
| 29. | 8E-2748 | [1] | HUB-REACTION | |
| 30. | 9X-7671 | [1] | SEAL-LIP TYPE | |
| 31. | 6V-0327 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 32. | 6V-0328 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 33. | 6Y-0859 | [1] | SEAL GP-DUO-CONE | |
| 34. | 1D-4628 | [26] | BOLT (7/8-9X3.25-IN) | |
| 35. | 5P-8249 | [26] | WASHER-HARD (24X41.5X4-MM THK) | |
| 36. | 8T-8919 | [2] | BOLT (1/2-13X1.75-IN) | |
| 37. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 38. | 137-9810 | [2] | SEAL-PACKING | |
| 39. | 137-4490 | [2] | RETAINER | |
| 40. | 8C-6561 | [16] | BOLT (5/16-18X1.375-IN) | |
| 41. | 8T-4224 | [16] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP29840368
3W-6493: DRIVE GP-FINAL
3W-6493 DRIVE GP-FINAL
S/N AEM1-UP; AGM1-UP
DOES NOT INCLUDE MOUNTING HARDWARE AND SPROCKET SEGMENTS
FIELD REPLACEMENT FOR @@@@@ 7G-5532@@@@@
S/N AEM1-UP; AGM1-UP
DOES NOT INCLUDE MOUNTING HARDWARE AND SPROCKET SEGMENTS
FIELD REPLACEMENT FOR @@@@@ 7G-5532@@@@@
For full view, you need register
Parts for your D6R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9G-9180 | [1] | HUB-SPROCKET | |
| 2. | 6V-0329 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 3. | 6V-0330 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 4. | 9G-9181 | [1] | RETAINER | |
| 5. | 8G-8844 | [1] | RING-LOCK | |
| 6. | 9G-8639 | [1] | GEAR-RING (94-TEETH) | |
| 7. | 8T-9399 | [33] | BOLT (3/4-10X2.25-IN) | |
| 8. | 8T-4994 | [33] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 9. | 9G-8638 | [3] | GEAR-PLANETARY (40-TEETH) | |
| 10. | 1B-3978 | [6] | CUP-BEARING (TAPERED ROLLER) | |
| 11. | 156-4593 | [6] | CONE-BEARING (TAPERED ROLLER) | |
| 12. | 9G-9183 | [3] | SHAFT | |
| 13. | 7X-0346 | [3] | BOLT (5/8-11X2-IN) | |
| 14. | 9G-9178 | [1] | SPINDLE | |
| 15. | 2P-3696 | [3] | RETAINER | |
| 16. | 2B-0947 | [10] | BOLT (1/2-13X2.25-IN) | |
| 17. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 18. | 8T-4896 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 19. | 8G-8845 | [1] | COVER | |
| 20. | 1P-9005 | [1] | SEAL-O-RING | |
| 21. | 2S-4078 | [1] | SEAL-O-RING | |
| 22. | 6V-0439 | [1] | PLUG-MAGNETIC (FINAL DRIVE, OIL FILL) | |
| 23. | 9G-9175 | [1] | CARRIER | |
| 24. | 9S-4185 | [1] | PLUG (3/4-16-THD)(FINAL DRIVE, OIL DRAIN) | |
| 25. | 3K-0360 | [1] | SEAL-O-RING | |
| 26. | 9H-3360 | [1] | SEAL-O-RING | |
| 27. | 8E-2748 | [1] | HUB-REACTION | |
| 28. | 9X-7671 C | [1] | SEAL-LIP TYPE | |
| 29. | 6V-0327 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 30. | 6V-0328 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 31. | 6Y-0859 | [1] | SEAL GP-DUO-CONE | |
| 31A. | 1M-9011 | [2] | RING-TORIC | |
| 31B. | Z | [2] | SEAL-RING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Z | NOT SERVICED SEPARATELY | |||
#SEBP29840369
7G-5532: DRIVE GP-FINAL
7G-5532 DRIVE GP-FINAL -2 REQUIRED
S/N AEM1-UP; AGM1-UP
PART OF 164-4792, 164-4794 POWER TRAIN AR
FIELD REPLACEMENT ORDER @@@@@ 3W-6493@@@@@
S/N AEM1-UP; AGM1-UP
PART OF 164-4792, 164-4794 POWER TRAIN AR
FIELD REPLACEMENT ORDER @@@@@ 3W-6493@@@@@
For full view, you need register
Parts for your D6R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9G-9180 | [1] | HUB-SPROCKET | |
| 2. | 6V-0329 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 3. | 6V-0330 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 4. | 9G-9181 | [1] | RETAINER | |
| 5. | 8G-8844 | [1] | RING-LOCK | |
| 6. | 9G-8639 | [1] | GEAR-RING (94-TEETH) | |
| 7. | 8T-9399 | [33] | BOLT (3/4-10X2.25-IN) | |
| 8. | 8T-4994 | [33] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 9. | 9G-8638 | [3] | GEAR-PLANETARY (40-TEETH) | |
| 10. | 1B-3978 | [6] | CUP-BEARING (TAPERED ROLLER) | |
| 11. | 156-4593 | [6] | CONE-BEARING (TAPERED ROLLER) | |
| 12. | 9G-9183 | [3] | SHAFT | |
| 13. | 7X-0346 | [3] | BOLT (5/8-11X2-IN) | |
| 14. | 9G-9178 C | [1] | SPINDLE | |
| 15. | 2P-3696 | [3] | RETAINER | |
| 16. | 2B-0947 | [10] | BOLT (1/2-13X2.25-IN) | |
| 17. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 18. | 8T-4896 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 19. | 8G-8845 | [1] | COVER | |
| 20. | 2R-0098 | [1] | SEAL-O-RING | |
| 21. | 188-0908 YC | [1] | SEGMENT GP-SPROCKET | |
| 22. | 1P-9005 | [1] | SEAL-O-RING | |
| 23. | 2S-4078 | [1] | SEAL-O-RING | |
| 24. | 6V-0439 | [1] | PLUG-MAGNETIC (FINAL DRIVE, OIL FILL) | |
| 25. | 9G-9175 | [1] | CARRIER | |
| 26. | 9S-4185 | [1] | PLUG (3/4-16-THD)(FINAL DRIVE, OIL DRAIN) | |
| 27. | 3K-0360 | [1] | SEAL-O-RING | |
| 28. | 9H-3360 | [1] | SEAL-O-RING | |
| 29. | 8E-2748 C | [1] | HUB-REACTION | |
| 30. | 9X-7671 | [1] | SEAL-LIP TYPE | |
| 31. | 6V-0327 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 32. | 6V-0328 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 33. | 6Y-0859 | [1] | SEAL GP-DUO-CONE | |
| Z | [2] | SEAL-RING | ||
| 1M-9011 | [2] | RING-TORIC | ||
| 34. | 1D-4628 | [26] | BOLT (7/8-9X3.25-IN) | |
| 35. | 5P-8249 | [26] | WASHER-HARD (24X41.5X4-MM THK) | |
| 36. | 8T-8919 C | [2] | BOLT (1/2-13X1.75-IN) | |
| 37. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
| Z | NOT SERVICED SEPARATELY | |||
