AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

345B L Series II Excavators AGS00001-UP (MACHINE) POWERED BY 3176C Engine ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



EXCAVATOR 345B II EXCAVATOR AGS
 345B L Series II Excavators AGS00001-UP (MACHINE) POWERED BY 3176C Engine SEBP2985 345B II AGS   (1999)

Parts group 345B II:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
ALARM GP
ALARM GP-TRAVEL
128-8915 ALARM GP-TRAVEL
128-8915 ALARM GP-TRAVEL -BACK UP
S/N ALB1-UP; AGS1-UP
PART OF 173-0345, 173-1747 CHASSIS AR
Type 1
128-8915 ALARM GP-TRAVEL
128-8915 ALARM GP-TRAVEL -BACK UP
S/N ALB1-UP; AGS1-UP
PART OF 173-0345, 173-1747 CHASSIS AR
Type 2
ALTERNATOR GP-CHARGING
PULLEY GP-REF COMPRESSOR & ALT
141-6158 PULLEY GP-REF COMPRESSOR & ALT
141-6158 PULLEY GP-REF COMPRESSOR & ALT
S/N 7ZR3677-UP
PART OF 173-0355 ENGINE AR-COMPLETE
ALTERNATOR GP-CHARGING
141-6157 ALTERNATOR GP-CHARGING
141-6157 ALTERNATOR GP-CHARGING
S/N 7ZR3677-10433
PART OF 173-0355 ENGINE AR-COMPLETE
ALTERNATOR GP-CHARGING
141-6157 ALTERNATOR GP-CHARGING
141-6157 ALTERNATOR GP-CHARGING
S/N 7ZR10434-UP
PART OF 173-0355 ENGINE AR-COMPLETE
ALTERNATOR GP-CHARGING
177-9953 ALTERNATOR GP-CHARGING
177-9953 ALTERNATOR GP-CHARGING
S/N 7ZR10434-UP
24-VOLT, 80-AMPERE
PART OF 141-6157 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
3E-7577 ALTERNATOR GP-CHARGING
3E-7577 ALTERNATOR GP-CHARGING
S/N 7ZR3677-UP
24-VOLT, 75-AMPERE
PART OF 141-6157 ALTERNATOR GP-CHARGING
BATTERY GP
BATTERY & WIRING GP
125-4856 BATTERY & WIRING GP
125-4856 BATTERY & WIRING GP
S/N ALB1-UP; AGS1-UP
COLD WEATHER STARTING
AN ATTACHMENT
BATTERY & WIRING GP
167-3623 BATTERY & WIRING GP
167-3623 BATTERY & WIRING GP
S/N ALB1-UP; AGS1-UP
PART OF 173-0345, 173-1747 CHASSIS AR
ELECTRONICS GP-ENGINE
CONTROL & MTG GP-ENGINE ELEK
124-2673 CONTROL & MTG GP-ENGINE ELEK
124-2673 CONTROL & MTG GP-ENGINE ELEK
S/N 7ZR3677-UP
PART OF 173-0355 ENGINE AR-COMPLETE
CONTROL GP-ENGINE ELECTRONIC
115-3055 CONTROL GP-ENGINE ELECTRONIC
115-3055 CONTROL GP-ENGINE ELECTRONIC
S/N 7ZR3677-UP
PART OF 124-2673 CONTROL & MTG GP-ENGINE ELEK
ELECTRONICS GP-IMPLEMENT
CONTROL & MTG GP-IMPLEMENT
152-2133 CONTROL & MTG GP-IMPLEMENT
152-2133 CONTROL & MTG GP-IMPLEMENT
S/N ALB1-UP; AGS1-UP
PART OF 149-7567, 149-7568, 151-8351 CONTROL AR-AUXILIARY
Type 1
AN ATTACHMENT
CONTROL & MTG GP-IMPLEMENT
152-2133 CONTROL & MTG GP-IMPLEMENT
152-2133 CONTROL & MTG GP-IMPLEMENT
S/N ALB1-UP; AGS1-UP
PART OF 149-7567, 149-7568, 151-8351 CONTROL AR-AUXILIARY
Type 2
AN ATTACHMENT
ELECTRONICS GP-MACHINE
CONTROL & MTG GP-MACHINE
164-8254 CONTROL & MTG GP-MACHINE
164-8254 CONTROL & MTG GP-MACHINE
S/N ALB1-198; AGS1-587
PART OF 173-0345, 173-1747 CHASSIS AR
CONTROL & MTG GP-MACHINE
191-6919 CONTROL & MTG GP-MACHINE
191-6919 CONTROL & MTG GP-MACHINE
S/N ALB199-UP; AGS588-UP
PART OF 173-0345, 173-1747 CHASSIS AR
CONTROL GP-UNPROGRAMMED
CONTROL GP-UNPROGRAMMED
168-7314 CONTROL GP-UNPROGRAMMED
168-7314 CONTROL GP-UNPROGRAMMED -PRODUCT LINK 201
S/N ALB1-UP; AGS1-UP
PART OF 242-7205 CONTROL GP-COMMUNICATION
AN ATTACHMENT
LIGHTING GP
LAMP GP-DOME
162-7755 LAMP GP-DOME
162-7755 LAMP GP-DOME
S/N ALB1-UP; AGS1-UP
24-VOLT
PART OF 134-3868, 234-1899 WIRING GP-CAB
LAMP GP-FLOOD
126-7487 LAMP GP-FLOOD
126-7487 LAMP GP-FLOOD
S/N ALB1-UP; AGS1-UP
PART OF 134-3868, 234-1899 WIRING GP-CAB
LAMP GP-FLOOD
153-2521 LAMP GP-FLOOD
153-2521 LAMP GP-FLOOD
S/N ALB1-UP; AGS1-UP
24-VOLT
PART OF 125-4846 LIGHTING GP-BOOM
AN ATTACHMENT
LAMP GP-FLOOD
153-2523 LAMP GP-FLOOD
153-2523 LAMP GP-FLOOD
S/N ALB1-UP; AGS1-UP
24-VOLT
PART OF 4I-5409 LIGHTING GP-FLOOD
LAMP GP-FLOOD
5I-8250 LAMP GP-FLOOD
5I-8250 LAMP GP-FLOOD
S/N ALB1-UP; AGS1-UP
65 WATT/24 VOLT. VERTICAL
PART OF 125-4846 LIGHTING GP-BOOM
AN ATTACHMENT
LIGHTING GP-BOOM
125-4846 LIGHTING GP-BOOM
125-4846 LIGHTING GP-BOOM
S/N ALB1-UP; AGS1-UP
PART OF 176-0074, 176-0075 BOOM AR-AUXILIARY HYDRAULIC, 158-0056 BOOM AR-LONG REACH, 158-0058 BOOM AR-MASS, 158-0057 BOOM AR-REACH
AN ATTACHMENT
LIGHTING GP-FLOOD
130-3869 LIGHTING GP-FLOOD
130-3869 LIGHTING GP-FLOOD
S/N ALB1-UP; AGS1-UP
PART OF 130-5424 GUARD AR-OVERHEAD
AN ATTACHMENT
LIGHTING GP-FLOOD
4I-5409 LIGHTING GP-FLOOD
4I-5409 LIGHTING GP-FLOOD -CHASSIS
S/N ALB1-UP; AGS1-UP
PART OF 173-0345, 173-1747 CHASSIS AR
PANEL GP-CIRCUIT BREAKER
PANEL GP-CIRCUIT BREAKER
176-0971 PANEL GP-CIRCUIT BREAKER
176-0971 PANEL GP-CIRCUIT BREAKER
S/N ALB1-UP; AGS1-UP
PART OF 167-3623 BATTERY & WIRING GP
SENSOR GP
SENSOR GP-PRESSURE
161-9927 SENSOR GP-PRESSURE
161-9927 SENSOR GP-PRESSURE
S/N 7ZR3677-UP
PART OF 174-6824 WIRING GP-ELECTRONIC CONTROL
SENSOR GP-PRESSURE
161-9930 SENSOR GP-PRESSURE
161-9930 SENSOR GP-PRESSURE
S/N 7ZR3677-UP
PART OF 174-6824 WIRING GP-ELECTRONIC CONTROL
SENSOR GP-PRESSURE
194-6722 SENSOR GP-PRESSURE
194-6722 SENSOR GP-PRESSURE
S/N 7ZR3677-UP
PART OF 174-6824 WIRING GP-ELECTRONIC CONTROL
OPTIONAL FIELD REPLACEMENT ORDER @@@@@249-5293@@@@@, 274-6717 SENSOR-PRESSURE
SENSOR GP-SPEED
265-9033 SENSOR GP-SPEED
265-9033 SENSOR GP-SPEED
S/N 7ZR3677-UP
CAMSHAFT POSITION
PART OF 174-6824 WIRING GP-ELECTRONIC CONTROL
STARTING AID GP
STARTING AID GP-ETHER
171-9127 STARTING AID GP-ETHER
171-9127 STARTING AID GP-ETHER
S/N ALB1-342; AGS1-1748
AN ATTACHMENT
STARTING AID GP-ETHER
171-9127 STARTING AID GP-ETHER
171-9127 STARTING AID GP-ETHER
S/N ALB343-UP; AGS1749-UP
AN ATTACHMENT
STARTING MOTOR GP
STARTING MOTOR GP-ELECTRIC
102-5836 STARTING MOTOR GP-ELECTRIC
102-5836 STARTING MOTOR GP-ELECTRIC
S/N 7ZR3677-4147
24-VOLT. STARTING AID RECOMMENDED BELOW 0-DEG CELSIUS (32-DEG F)
PART OF 173-0355 ENGINE AR-COMPLETE
FOR USE WITH 24-VOLT SYSTEM AND LH STARTER MOUNT FLYWHEEL HOUSING, REQUIRES: SAE NO. 1 FLYWHEEL HOUSING
STARTING MOTOR GP-ELECTRIC
105-4729 STARTING MOTOR GP-ELECTRIC
105-4729 STARTING MOTOR GP-ELECTRIC
S/N 7ZR4148-8482
24-VOLT
PART OF 173-0355 ENGINE AR-COMPLETE
STARTING MOTOR GP-ELECTRIC
106-8554 STARTING MOTOR GP-ELECTRIC
106-8554 STARTING MOTOR GP-ELECTRIC
S/N 7ZR3677-4147
24-VOLT
PART OF 6V-5539 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
197-0986 STARTING MOTOR GP-ELECTRIC
197-0986 STARTING MOTOR GP-ELECTRIC
S/N 7ZR8483-UP
24-VOLT
PART OF 173-0355 ENGINE AR-COMPLETE
STARTING MOTOR GP-ELECTRIC
207-1556 STARTING MOTOR GP-ELECTRIC
207-1556 STARTING MOTOR GP-ELECTRIC
S/N 7ZR8483-UP
24-VOLT
PART OF 197-0986 STARTING MOTOR GP-ELECTRIC
OPTIONAL FIELD REPLACEMENT ORDER @@@@@237-1962@@@@@
FIELD REPLACEMENT FOR @@@@@ 6V-5539@@@@@, @@@@@ 6V-5582@@@@@
STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
S/N 7ZR3677-UP
24-VOLT
Type 1
FIELD REPLACEMENT FOR @@@@@207-1556@@@@@
STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
S/N 7ZR3677-UP
24-VOLT
Type 2
FIELD REPLACEMENT FOR @@@@@207-1556@@@@@
STARTING MOTOR GP-ELECTRIC
6V-0890 STARTING MOTOR GP-ELECTRIC
6V-0890 STARTING MOTOR GP-ELECTRIC
S/N 7ZR3677-8953
24-VOLT
PART OF 105-4729 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@237-1962@@@@@
6V-5539 STARTING MOTOR GP-ELECTRIC
6V-5539 STARTING MOTOR GP-ELECTRIC
S/N 7ZR3677-4147
24-VOLT
PART OF 102-5836 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@
FIELD REPLACEMENT FOR @@@@@ 6V-5540@@@@@
STARTING MOTOR GP-ELECTRIC
6V-5540 STARTING MOTOR GP-ELECTRIC
6V-5540 STARTING MOTOR GP-ELECTRIC
S/N 7ZR3677-4147
24-VOLT
PART OF 6V-5539 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 6V-5539@@@@@
STARTING MOTOR GP-ELECTRIC
6V-5582 STARTING MOTOR GP-ELECTRIC
6V-5582 STARTING MOTOR GP-ELECTRIC
S/N 7ZR3677-4147
24-VOLT
PART OF 6V-5539 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@
SWITCH GP
SWITCH GP-DISCONNECT
7N-0719 SWITCH GP-DISCONNECT
7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N ALB1-UP; AGS1-UP
PART OF 176-0971 PANEL GP-CIRCUIT BREAKER
SWITCH GP-PRESSURE
234-4678 SWITCH GP-PRESSURE
234-4678 SWITCH GP-PRESSURE
S/N ALB1-UP; AGS1-UP
PART OF 131-8931 LINES GP-HYD TANK AIR PRESS
SWITCH GP-START
9G-7641 SWITCH GP-START
9G-7641 SWITCH GP-START -ENGINE, KEY
S/N ALB1-UP; AGS1-UP
PART OF 125-4855 WIRING GP-CONSOLE
CONTROL GP-FOOT
138-4653 CONTROL GP-FOOT
138-4653 CONTROL GP-FOOT
S/N ALB1-UP; AGS1-UP
AN ATTACHMENT
WIRING GP
BATTERY & WIRING GP
125-4856 BATTERY & WIRING GP
125-4856 BATTERY & WIRING GP
S/N ALB1-UP; AGS1-UP
COLD WEATHER STARTING
AN ATTACHMENT
BATTERY & WIRING GP
167-3623 BATTERY & WIRING GP
167-3623 BATTERY & WIRING GP
S/N ALB1-UP; AGS1-UP
PART OF 173-0345, 173-1747 CHASSIS AR
CONNECTION GP-ELECTRICAL
124-2674 CONNECTION GP-ELECTRICAL
124-2674 CONNECTION GP-ELECTRICAL
S/N 7ZR3677-UP
M8X1.25X25MM GROUND STUD BELOW ECM
PART OF 173-0355 ENGINE AR-COMPLETE
WIRING GP-CAB
134-3868 WIRING GP-CAB
134-3868 WIRING GP-CAB -WITH UPPER WIPER
S/N ALB1-347; AGS1-1813
PART OF 127-6516 CAB GP
WIRING GP-CAB
234-1899 WIRING GP-CAB
234-1899 WIRING GP-CAB
S/N ALB348-UP; AGS1814-UP
PART OF 234-1898 CAB GP
WIRING GP-COMBINED FLOW
149-7784 WIRING GP-COMBINED FLOW
149-7784 WIRING GP-COMBINED FLOW
S/N ALB1-UP; AGS1-UP
PART OF 149-7567, 149-7568 CONTROL AR-AUXILIARY
AN ATTACHMENT
WIRING GP-CONSOLE
125-4854 WIRING GP-CONSOLE
125-4854 WIRING GP-CONSOLE
S/N ALB1-347; AGS1-1813
LH
PART OF 176-1167 WIRING GP-CONSOLE
WIRING GP-CONSOLE
125-4855 WIRING GP-CONSOLE
125-4855 WIRING GP-CONSOLE
S/N ALB1-UP; AGS1-UP
RH
PART OF 176-1167 WIRING GP-CONSOLE
176-1167 WIRING GP-CONSOLE
176-1167 WIRING GP-CONSOLE
S/N ALB1-UP; AGS1-UP
PART OF 173-0348 OPERATOR AR
WIRING GP-CONSOLE
234-1987 WIRING GP-CONSOLE
234-1987 WIRING GP-CONSOLE
S/N ALB348-UP; AGS1814-UP
PART OF 176-1167 WIRING GP-CONSOLE
WIRING GP-COUNTERWEIGHT
128-8911 WIRING GP-COUNTERWEIGHT
128-8911 WIRING GP-COUNTERWEIGHT
S/N ALB1-UP; AGS1-UP
PART OF 158-0072 COUNTERWEIGHT AR
AN ATTACHMENT
WIRING GP-ELECTRONIC CONTROL
174-6824 WIRING GP-ELECTRONIC CONTROL
174-6824 WIRING GP-ELECTRONIC CONTROL
S/N 7ZR3677-UP
PART OF 163-5639 ENGINE AR-CORE
WIRING GP-FINE SWING
125-4858 WIRING GP-FINE SWING
125-4858 WIRING GP-FINE SWING
S/N ALB1-UP; AGS1-UP
PART OF 126-2020 VALVE AR-SWING
AN ATTACHMENT
WIRING GP-UNIT INJECTOR
117-2760 WIRING GP-UNIT INJECTOR
117-2760 WIRING GP-UNIT INJECTOR
S/N 7ZR3677-UP
PART OF 163-5639 ENGINE AR-CORE
ELECTRONICS GP-COMMUNICATION
CONTROL GP-COMMUNICATION
242-7205 CONTROL GP-COMMUNICATION
242-7205 CONTROL GP-COMMUNICATION -PRODUCT LINK 201
S/N ALB1-UP; AGS1-UP
PART OF 241-2808 INSTALLATION GP-COMMUNICATION
FIELD REPLACEMENT ORDER @@@@@273-5723@@@@@, @@@@@273-5725@@@@@
AN ATTACHMENT
262-1421 ELECTRONICS GP-COMMUNICATION
262-1421 ELECTRONICS GP-COMMUNICATION -PRODUCT LINK 300
S/N ALB1-UP; AGS1-UP
PART OF 273-5723, 273-5725 INSTALLATION GP-COMMUNICATION
INSTALLATION GP-COMMUNICATION
241-2808 INSTALLATION GP-COMMUNICATION
241-2808 INSTALLATION GP-COMMUNICATION
S/N ALB1-UP; AGS1-UP
AN ATTACHMENT
273-5723 INSTALLATION GP-COMMUNICATION
273-5723 INSTALLATION GP-COMMUNICATION -PRODUCT LINK 321SR
S/N ALB1-UP; AGS1-UP
FIELD REPLACEMENT FOR @@@@@242-7205@@@@@
FOR USE WITH MACHINE PRODUCT LINK READY
273-5725 INSTALLATION GP-COMMUNICATION
273-5725 INSTALLATION GP-COMMUNICATION -PRODUCT LINK 300
S/N ALB1-UP; AGS1-UP
FIELD REPLACEMENT FOR @@@@@242-7205@@@@@
FOR USE WITH MACHINE NOT PRODUCT LINK READY
RADIO GP
336-3545 RADIO GP-COMMUNICATION
336-3545 RADIO GP-COMMUNICATION -PRODUCT LINK 121SR
S/N ALB1-UP; AGS1-UP
PART OF 273-5723 INSTALLATION GP-COMMUNICATION
HARNESS GP
249-5293 HARNESS AS-SENSOR
249-5293 HARNESS AS-SENSOR
S/N 7ZR3677-UP
PART OF 161-9930 SENSOR GP-PRESSURE

Information:

(For parts list, see above)

Special Instruction
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 262-6141 Alarm Gp {7406}
Installation of 262-6141 Alarm Gp {7406}
Troubleshooting
Alternator - Noisy Operation
3176C Engines for Caterpillar Built Machines
Alternator Problem - Charging Problem and/or Noisy Operation
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Disassembly and Assembly
Alternator - Remove and Install
3176C and 3196 Engines for Caterpillar Built Machines
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/01
Engine News
Technical Information Bulletin
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401}
Process for Communicating an Incident with a Battery{1401}
Troubleshooting
CID 0168 FMI 02 System Voltage intermittent/erratic
3176C Engines for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
3176C Engines for Caterpillar Built Machines
Electrical Power Supply - Test
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Service Magazine
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/01
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Service Magazine
New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat <SUP>&reg;</SUP> Products {7610, 7620}
2014/02/06
Truck Engine News
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/04/04
Engine News
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/04
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/03/28
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Technical Information Bulletin
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Troubleshooting
ECM Will Not Communicate with Other Systems or Display Modules
3176C Engines for Caterpillar Built Machines
Self-Diagnostics
3176C Engines for Caterpillar Built Machines
Flash Programming
3176C Engines for Caterpillar Built Machines
CID 0266 FMI 02 Incorrect Crank-without-inject inputs
3176C Engines for Caterpillar Built Machines
Electronic Service Tool Will Not Communicate with ECM
3176C Engines for Caterpillar Built Machines
System Configuration Parameters
3176C Engines for Caterpillar Built Machines
Programming Parameters
3176C Engines for Caterpillar Built Machines
CID 0247 FMI 09 J1939 Data Link communications
3176C Engines for Caterpillar Built Machines
Test ECM Mode
3176C Engines for Caterpillar Built Machines
CID 0268 FMI 02 Check Programmable Parameters
3176C Engines for Caterpillar Built Machines
CID 0253 FMI 02 Personality Module mismatch
3176C Engines for Caterpillar Built Machines
Diagnostic Codes
3176C Engines for Caterpillar Built Machines
Replacing the ECM
3176C Engines for Caterpillar Built Machines
ECM Will Not Accept Factory Passwords
3176C Engines for Caterpillar Built Machines
CAN Data Link Circuit - Test
3176C Engines for Caterpillar Built Machines
Crank Without Inject Circuit - Test
3176C Engines for Caterpillar Built Machines
User Defined Shutdown Input Circuit - Test
3176C Engines for Caterpillar Built Machines
Cat Data Link Circuit - Test
3176C Engines for Caterpillar Built Machines
System Overview
3176C Engines for Caterpillar Built Machines
Event Codes
3176C Engines for Caterpillar Built Machines
Programmable Parameters
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Symptom Troubleshooting
3176C Engine for the R1600G and the R1700G Load Haul Dumps
ECM Software - Install
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Engine Stalls at Low RPM
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Factory Passwords
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Pressure Sensor - Calibrate
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Diagnostic Trouble Code List
3176C Engine for the R1600G and the R1700G Load Haul Dumps
System Overview
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Diagnostic Capabilities
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Configuration Parameters
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Shutdown - Test
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Timing - Calibrate
3176C Engine for the R1600G and the R1700G Load Haul Dumps
ECM - Replace
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Electronic Service Tool Does Not Communicate
3176C Engine for the R1600G and the R1700G Load Haul Dumps
ECM Does Not Communicate with Other Modules
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Engine Shutdown Is Intermittent
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Cat Data Link - Test
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Disassembly and Assembly
Speed/Timing Sensor - Remove and Install
3176C and 3196 Engines for Caterpillar Built Machines
Electronic Control Module - Remove and Install
3176C and 3196 Engines for Caterpillar Built Machines
Service Magazine
Download Flash Files By Using The Caterpillar Service Information System (SIS) Or SIS Web {1901, 7620}
2000/01/10
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
New Factory Password System for Caterpillar Engines {1000, 1900}
2005/03/07
Intake Valves are Sticking in Cold Climates {1100, 1105, 7620}
2005/08/15
Update on the Factory Password System {1901, 7620}
2008/02/11
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Troubleshooting
CID 0296 FMI 09 Unable to communicate with Transmission ECM
3176C Engines for Caterpillar Built Machines
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
A New Version of Caterpillar Electronic Technician (ET) is Now Available {0785, 7600, 7610}
2008/05/19
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Troubleshooting
Engine Does Not Crank
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Engine Cranks but Does Not Start
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Troubleshooting
CID 0261 FMI 13 Engine Timing Calibration required
3176C Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
3176C Engines for Caterpillar Built Machines
CID 0174 FMI 04 Fuel Temperature short to ground
3176C Engines for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C Engines for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C Engines for Caterpillar Built Machines
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3176C Engines for Caterpillar Built Machines
CID 0041 FMI 04 8 Volt DC Supply short to ground
3176C Engines for Caterpillar Built Machines
CID 0264 FMI 08 Decel Throttle Position signal abnormal
3176C Engines for Caterpillar Built Machines
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3176C Engines for Caterpillar Built Machines
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines
Engine Speed/Timing Sensor - Calibrate
3176C Engines for Caterpillar Built Machines
CID 0190 FMI 02 Loss of Engine Speed Signal
3176C Engines for Caterpillar Built Machines
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3176C Engines for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
3176C Engines for Caterpillar Built Machines
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C Engines for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C Engines for Caterpillar Built Machines
CID 0174 FMI 03 Fuel Temperature open/short to +batt
3176C Engines for Caterpillar Built Machines
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3176C Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3176C Engines for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C Engines for Caterpillar Built Machines
Engine Temperature Sensor Open or Short Circuit - Test
3176C Engines for Caterpillar Built Machines
Decelerator Position Sensor Circuit - Test
3176C Engines for Caterpillar Built Machines
Engine Speed/Timing Sensor Circuit - Test
3176C Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
3176C Engines for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3176C Engines for Caterpillar Built Machines
Pressure Sensor - Calibrate
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Speed/Timing - Test
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Sensor Signal (Analog, Active) - Test
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Sensor Supply - Test
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Timing - Calibrate
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Speed Control (Remote Throttle) - Test
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Coolant Level - Test
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Disassembly and Assembly
Engine Oil Pressure Sensor - Remove and Install
3176C and 3196 Engines for Caterpillar Built Machines
Speed/Timing Sensor - Remove and Install
3176C and 3196 Engines for Caterpillar Built Machines
Coolant Temperature Sensor - Remove and Install
3176C and 3196 Engines for Caterpillar Built Machines
Service Magazine
Coolant Level Sensor Installation Service Notes {5574}
2008/07/14
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Troubleshooting
CID 1599 FMI 05 Engine Fan Pull Solenoid open circuit
3176C Engines for Caterpillar Built Machines
CID 1599 FMI 06 Engine Fan Pull Solenoid short to ground
3176C Engines for Caterpillar Built Machines
CID 1600 FMI 06 Engine Fan Push Solenoid short to ground
3176C Engines for Caterpillar Built Machines
CID 1600 FMI 05 Engine Fan Push Solenoid open circuit
3176C Engines for Caterpillar Built Machines
Injector Solenoid - Test
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Technical Information Bulletin
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Troubleshooting
Ether Injection System - Test
3176C Engines for Caterpillar Built Machines
CID 0545 FMI 06 Ether Start Relay short to ground
3176C Engines for Caterpillar Built Machines
CID 0545 FMI 05 Ether Start Relay open/short to +batt
3176C Engines for Caterpillar Built Machines
Service Magazine
A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
2013/09/19
Engine News
Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Technical Information Bulletin
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Disassembly and Assembly
Electric Starting Motor - Remove and Install
3176C and 3196 Engines for Caterpillar Built Machines
Service Magazine
Examine Failed Starting Motors to Understand the Reason for Failure {1453}
2002/10/28
Troubleshooting
CID 0091 FMI 02 Incorrect Throttle Switch inputs
3176C Engines for Caterpillar Built Machines
Throttle Switch Circuit - Test
3176C Engines for Caterpillar Built Machines
Speed Control (Switch) - Test
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Shutdown - Test
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Speed Control (Remote Throttle) - Test
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Coolant Level - Test
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Service Magazine
An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/01
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/04/04
Engine News
The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785}
2004/04/19
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/01
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Enhanced Voltmeter Leads Are Now Available {0785}
2006/02/13
Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785}
2006/10/16
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/04
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/03/28
Special Instruction
An Aid To Reading Multimeter Scales{0785}
An Aid To Reading Multimeter Scales{0785}
Tool Operating Manual
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the Communications Adapter 3{1900}
Using the Communications Adapter 3{1900}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
Electronic Service Tool Will Not Communicate with ECM
3176C Engines for Caterpillar Built Machines
Electronic Service Tools
3176C Engines for Caterpillar Built Machines
Factory Passwords
3176C Engines for Caterpillar Built Machines
ECM Will Not Accept Factory Passwords
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Factory Passwords
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Electronic Service Tools
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Electronic Service Tool Does Not Communicate
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Service Magazine
Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/11
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is Now Available {0785}
2002/08/19
USB Cable Connects PC with USB Ports to Communication Adapter or to DataView Tool Group {0785, 0788}
2004/03/15
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/01
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/01
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/12/04
New 271-8590 Analyzer Gp (24-Volt) Quickly Identifies Starting and Charging System Problems {0709, 1406}
2006/10/01
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15
Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
CID 0091 FMI 02 Incorrect Throttle Switch inputs
3176C Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
3176C Engines for Caterpillar Built Machines
CID 0174 FMI 04 Fuel Temperature short to ground
3176C Engines for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C Engines for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C Engines for Caterpillar Built Machines
CID 0264 FMI 08 Decel Throttle Position signal abnormal
3176C Engines for Caterpillar Built Machines
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3176C Engines for Caterpillar Built Machines
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines
CID 0190 FMI 02 Loss of Engine Speed Signal
3176C Engines for Caterpillar Built Machines
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3176C Engines for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
3176C Engines for Caterpillar Built Machines
Engine Wiring Information
3176C Engines for Caterpillar Built Machines
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C Engines for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C Engines for Caterpillar Built Machines
CID 0174 FMI 03 Fuel Temperature open/short to +batt
3176C Engines for Caterpillar Built Machines
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3176C Engines for Caterpillar Built Machines
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3176C Engines for Caterpillar Built Machines
Electrical Connectors - Inspect
3176C Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3176C Engines for Caterpillar Built Machines
Decelerator Position Sensor Circuit - Test
3176C Engines for Caterpillar Built Machines
Throttle Switch Circuit - Test
3176C Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
3176C Engines for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3176C Engines for Caterpillar Built Machines
CID 1599 FMI 05 Engine Fan Pull Solenoid open circuit
3176C Engines for Caterpillar Built Machines
CID 1599 FMI 06 Engine Fan Pull Solenoid short to ground
3176C Engines for Caterpillar Built Machines
CID 1600 FMI 06 Engine Fan Push Solenoid short to ground
3176C Engines for Caterpillar Built Machines
CID 1600 FMI 05 Engine Fan Push Solenoid open circuit
3176C Engines for Caterpillar Built Machines
CID 0545 FMI 06 Ether Start Relay short to ground
3176C Engines for Caterpillar Built Machines
CID 0545 FMI 05 Ether Start Relay open/short to +batt
3176C Engines for Caterpillar Built Machines
Wiring Information
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Electrical Connectors - Inspect
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Electrical Connectors
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Tool Operating Manual
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Troubleshooting
Electronic Display Module - If Equipped
3176C Engines for Caterpillar Built Machines
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Improved VisionLink<SUP>TM</SUP> Software Is Now Available for Certain Caterpillar Machines {7601}
2012/06/07
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link 522 Systems {7494, 7606, 7620}
2012/12/14
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/22
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
Technical Information Bulletin
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Technical Information Bulletin
Product Link Registration Problems{733T, 7606}
Product Link Registration Problems{733T, 7606}
Multiple Registration Messages Occur with Product Link{733T, 7606}
Multiple Registration Messages Occur with Product Link{733T, 7606}
Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat<SUP>&reg;</SUP> Machines Equipped With VIMS3G{7601, 7620}
Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat® Machines Equipped With VIMS3G{7601, 7620}
Improper Customer Access and Asset Merging Within VisionLink<SUP>TM</SUP> and PartStore<SUP>TM</SUP> Through UCID Consolidation{7567, 7606}
Improper Customer Access and Asset Merging Within VisionLinkTM and PartStoreTM Through UCID Consolidation{7567, 7606}
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
New Flash File Software Is Used for Product Link 151/201 {7606, 7620}
2002/07/15
New Flexible Antenna Whip Available for Product Link {7606}
2002/12/02
New Processes Improve Registration of Product Link {7338, 7606}
2008/04/14
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
New Software Is Now Available for Product Link (PL 121) {7602, 7610, 7620}
2011/12/15
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link 522 Systems {7494, 7606, 7620}
2012/12/14
Improved Process for Activating Product Link PL522 On Assets In China {7606}
2012/11/19
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2015/07/14
New Software Is Now Available For Product Link 522 Systems On All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2013/04/22
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04
Improved VisionLink<SUP>TM</SUP>Store is Now Available for all Caterpillar Products {7606}
2013/03/29
Device Transfers Are Now Supported In VisionLink<SUP>TM</SUP> Store {7606}
2013/03/29
Improved VisionLink<SUP>TM</SUP> Store for Minimizing Delay in Appearance of VisionLink Store - Modules is Now Available for All Caterpillar Products {7606}
2013/03/29
New Product Link Software for PL121 and PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7610, 7620}
2013/05/02
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link 522 System {7606}
2013/09/27
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2013/07/08
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15
New Software Is Now Available For All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2013/08/19
Procedure for Improving Antenna Communication on All Machines Equipped With Product Link {733B, 7606}
2013/09/16
Improvements for Products and Systems Connected to Product Link {7606}
2013/10/02
New Product Link Software for PL300 Is Now Available for All Cat <SUP>&reg;</SUP>Products {7606, 7620}
2013/10/21
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2014/12/10
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606}
2014/08/08
Loss of Daily Reports May Be an Indicator of End of Life for the Product Link<SUP>&reg;</SUP> ECM on PL321SR and PL321VSR Systems {7606}
2014/06/24
Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
2014/07/25
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/22
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Revision to "Reports and Messages Not Available" Troubleshooting Procedure for Cat<SUP>&reg;</SUP> Products with Cat<SUP>&reg;</SUP> Product Link 121/321 {7606}
2014/12/24
Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
2015/01/06
Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
2015/03/17
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/06/26
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/09/11
Special Instruction
Generic Installation of the WAVS Cleaning System{7348}
Generic Installation of the WAVS Cleaning System{7348}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/04/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
A New Antenna For The Product Link Is Available {7010, 733T}
2008/06/09
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Truck sale:

Caterpillar 345BIIL, Construction
85,215 
Caterpillar 345BIIL, Construction
- Crawler Excavators
AVESCO AG
Switzerland
Caterpillar 345BIIL, Construction
100,561 
Caterpillar 345BIIL, Construction
- Crawler Excavators
Parana Equipamentos S.A.
Brazil
Caterpillar 345BIIL, Construction
 
Caterpillar 345BIIL, Construction
- Crawler Excavators
BERGERAT MONNOYEUR SP. Z O.O.
Poland
Caterpillar 345BIIL, Construction
56,000 
Caterpillar 345BIIL, Construction
- Crawler Excavators
BUTLER MACHINERY COMPANY
CATERPILLAR 345BII 2003
 
CATERPILLAR 345BII 2003
- TRACK EXCAVATORS
WAGNER EQUIPMENT CO
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.