AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

169-5532 DRIVE GP-SWING S/N APB1-UP PART OF 169-5529 DRIVE GP-SWING 345B II MH EXCAVATOR


HYDRAULIC SYSTEM
DRIVE GP
GENERATOR GP-HYDRAULIC
FILTER GP

EXCAVATOR 345B II MH EXCAVATOR APB
 345B Series II Material Handler APB00001-UP (MACHINE) POWERED BY 3176C Engine SEBP2990 345B II MH APB   (1999)

HYDRAULIC SYSTEM

DRIVE GP
DRIVE GP-SWING
169-5529 DRIVE GP-SWING
DRIVE GP-SWING
169-5530 DRIVE GP-SWING
DRIVE GP-SWING
169-5532 DRIVE GP-SWING
DRIVE GP-SWING
227-6113 DRIVE GP-SWING
DRIVE GP-SWING
227-6114 DRIVE GP-SWING
DRIVE GP-SWING
227-6156 DRIVE GP-SWING
 

#SEBP29900330
 

169-5532: DRIVE GP-SWING

169-5532 DRIVE GP-SWING
S/N APB1-UP
PART OF 169-5529 DRIVE GP-SWING
i01143125 SEBP2990
1695532 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 345B II MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-1509 [4] SHAFT-PLANETARY  
2. 114-1401 [1] COVER-HOUSING  
3. 093-1731 [1] RING-RETAINING  
4. 093-1730 [2] RING-RETAINING  
5. 7Y-0595 [1] SPACER (58X79.6X6-MM THK)  
6. 169-5535 [1] GEAR-SUN (20-TEETH)  
7. 136-2802 [2] CONNECTOR  
8. 136-2804 [1] BOSS  
9. 114-8234 [1] BREATHER (SWING DRIVE)(SWING DRIVE)  
10. 136-2803 [2] CLIP  
11. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
12. 114-1399 [1] PIPE-GAUGE  
13. 7Y-1238 [1] CARRIER  
14. 8T-6385 M [16] BOLT (M16X2X180-MM)  
15. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
16. 1U-8846 B SEALANT-GASKET  
18. 110-7216 [1] GEAR-SUN (24-TEETH)  
19. 4I-7467 [1] GEAR-RING (72-TEETH)  
20. 7I-7728 [1] CARRIER-PLANETARY  
21. 096-2653 [1] RING-RETAINING  
22. 169-5534 [1] HOUSING  
23. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
24. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 7I-7729 [1] SHAFT-PINION  
26. 135-9044 [2] SEAL-LIP TYPE  
27. 114-1403 [1] CAGE  
28. 5P-2235 [1] SEAL-O-RING  
29. 095-1806 [1] BEARING-ROLLER  
30. 7Y-0597 [1] SPACER-SPECIAL  
31. 096-4339 [1] BEARING AS-ROLLER  
  4D-7956 [1] RACE-ROLLER BEARING  
  4L-0734 [1] RACE & ROLLER AS  
32. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
33. 114-1383 [4] SHAFT-PLANETARY  
34. 094-1528 [8] WASHER (53X84X1-MM THK)  
35. 7Y-0339 [8] BEARING AS-ROLLER  
36. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
37. 095-0891 [4] PIN-SPRING  
38. 095-0886 [4] PIN-SPRING  
39. 094-1516 [4] BEARING-ROLLER  
40. 4I-7464 [4] GEAR-PLANETARY (25-TEETH)  
41. 094-0584 [8] WASHER (40.3X72X1-MM THK)  
42. 4I-1422 I [1] HOSE AS  
43. 8T-4956 M [1] BOLT (M12X1.75X35-MM)  
44. 8T-4244 M [1] NUT (M12X1.75-THD)  
45. 6V-7238 [1] VALVE-SHUTOFF  
46. 3K-0360 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP29900331
 

227-6113: DRIVE GP-SWING

227-6113 DRIVE GP-SWING -WITHOUT MOTOR, LH
S/N APB233-UP
PART OF 227-6156 DRIVE GP-SWING
i02161086 SEBP2990
2276113 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 345B II MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-1422 I [1] HOSE AS  
2. 4I-7464 [4] GEAR-PLANETARY (25-TEETH)  
3. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
4. 4I-7467 [1] GEAR-RING (72-TEETH)  
5. 6V-7238 [1] VALVE-SHUTOFF (SWING DRIVE)  
6. 7I-7728 [1] CARRIER-PLANETARY  
7. 7Y-0597 [1] SPACER-SPECIAL  
8. 7Y-1238 [1] CARRIER  
9. 093-1730 [2] RING-RETAINING  
10. 094-1509 [4] SHAFT-PLANETARY  
11. 094-1528 [8] WASHER (53X84X1-MM THK)  
12. 095-1806 [1] BEARING-ROLLER  
13. 096-2653 [1] RING-RETAINING  
14. 096-4339 [1] BEARING AS-ROLLER  
  4D-7956 [1] RACE-ROLLER BEARING  
  4L-0734 [1] RACE & ROLLER AS  
15. 110-7216 [1] GEAR-SUN (24-TEETH)  
16. 114-1383 [4] SHAFT-PLANETARY  
17. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
18. 114-1399 [1] PIPE-GAUGE  
19. 114-1401 [1] COVER-HOUSING  
20. 114-1403 [1] CAGE  
21. 114-8234 [1] BREATHER (SWING DRIVE)(1/2-14-NPTF-THD)  
    -OR-
  4H-6112 [1] BREATHER (SWING DRIVE)  
    (1/4-18 NPTF-THD)
22. 136-2802 [2] CONNECTOR  
23. 136-2803 [2] CLIP  
24. 136-2804 [1] BOSS (1/2-14-NPTF-THD)  
    -OR-
  227-6215 [1] BOSS (1/4-18-THD)  
25. 169-5534 [1] HOUSING  
26. 169-5535 [1] GEAR-SUN (20-TEETH)  
27. 227-6108 [1] SHAFT-PINION  
28. 093-1731 [1] RING-RETAINING  
29. 094-0584 [8] WASHER (40.3X72X1-MM THK)  
30. 199-4582 [4] BEARING AS  
31. 095-0886 [4] PIN-SPRING  
32. 095-0891 [4] PIN-SPRING  
33. 135-9044 [2] SEAL-LIP TYPE  
34. 3K-0360 [1] SEAL-O-RING  
35. 5P-2235 [1] SEAL-O-RING  
36. 191-2513 [8] BEARING AS-ROLLER  
37. 7Y-0595 [1] SPACER (58X79.6X6-MM THK)  
38. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
39. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
40. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
41. 8T-4244 M [1] NUT (M12X1.75-THD)  
42. 8T-4956 M [1] BOLT (M12X1.75X35-MM)  
43. 8T-6385 M [16] BOLT (M16X2X180-MM)  
44. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
45. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP29900332
 

227-6114: DRIVE GP-SWING

227-6114 DRIVE GP-SWING -WITHOUT MOTOR, RH
S/N APB322-UP
PART OF 227-6157 DRIVE GP-SWING
i02161200 SEBP2990
2276114 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 345B II MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-1422 I [1] HOSE AS  
2. 4I-7464 [4] GEAR-PLANETARY (25-TEETH)  
3. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
4. 4I-7467 [1] GEAR-RING (72-TEETH)  
5. 6V-7238 [1] VALVE-SHUTOFF (SWING DRIVE)  
6. 7I-7728 [1] CARRIER-PLANETARY  
7. 7Y-0597 [1] SPACER-SPECIAL  
8. 7Y-1238 [1] CARRIER  
9. 093-1730 [2] RING-RETAINING  
10. 094-1509 [4] SHAFT-PLANETARY  
11. 094-1528 [8] WASHER (53X84X1-MM THK)  
12. 095-1806 [1] BEARING-ROLLER  
13. 096-2653 [1] RING-RETAINING  
14. 096-4339 [1] BEARING AS-ROLLER  
  4D-7956 [1] RACE-ROLLER BEARING  
  4L-0734 [1] RACE & ROLLER AS  
15. 110-7216 [1] GEAR-SUN (24-TEETH)  
16. 114-1383 [4] SHAFT-PLANETARY  
17. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
18. 114-1399 [1] PIPE-GAUGE  
19. 114-1401 [1] COVER-HOUSING  
20. 114-1403 [1] CAGE  
21. 114-8234 [1] BREATHER (SWING DRIVE)(1/2-14-NPTF-THD)  
    -OR-
  4H-6112 [1] BREATHER (SWING DRIVE)  
    (1.4-18 NPTF-THD)
22. 136-2802 [2] CONNECTOR  
23. 136-2803 [2] CLIP  
24. 136-2804 [1] BOSS (1/2-14-NPTF-THD)  
    -OR-
  227-6215 [1] BOSS (1/4-18-THD)  
25. 169-5534 [1] HOUSING  
26. 169-5535 [1] GEAR-SUN (20-TEETH)  
27. 227-6108 [1] SHAFT-PINION  
28. 093-1731 [1] RING-RETAINING  
29. 094-0584 [8] WASHER (40.3X72X1-MM THK)  
30. 199-4582 [4] BEARING AS  
31. 095-0886 [4] PIN-SPRING  
32. 095-0891 [4] PIN-SPRING  
33. 135-9044 [2] SEAL-LIP TYPE  
34. 3K-0360 [1] SEAL-O-RING  
35. 5P-2235 [1] SEAL-O-RING  
36. 191-2513 [8] BEARING AS-ROLLER  
37. 7Y-0595 [1] SPACER (58X79.6X6-MM THK)  
38. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
39. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
40. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
41. 8T-4244 M [1] NUT (M12X1.75-THD)  
42. 8T-4956 M [1] BOLT (M12X1.75X35-MM)  
43. 8T-6385 M [16] BOLT (M16X2X180-MM)  
44. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
45. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP29900333
 

227-6156: DRIVE GP-SWING

227-6156 DRIVE GP-SWING -LH
S/N APB322-UP
PART OF 169-5525 POWER TRAIN AR
i02305176 SEBP2990
2276156 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 345B II MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-9334 Y [1] MOTOR & MTG GP-SWING  
2. 227-6113 Y [1] DRIVE GP-SWING (WITHOUT MOTOR, LH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP29900334
 

227-6157: DRIVE GP-SWING

227-6157 DRIVE GP-SWING -RH
S/N APB322-UP
PART OF 169-5525 POWER TRAIN AR
i02305183 SEBP2990
2276157 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 345B II MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-9335 Y [1] MOTOR & MTG GP-SWING  
2. 227-6114 Y [1] DRIVE GP-SWING (WITHOUT MOTOR, RH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP29900335
 

169-5527: FASTENER GP-SWING & FINAL DR

169-5527 FASTENER GP-SWING & FINAL DR
S/N APB1-UP
PART OF 169-5525 POWER TRAIN AR
i01143054 SEBP2990
1695527 FASTENER GP-SWING & FINAL DR Parts scheme
  For full view, you need register

Parts for your 345B II MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-5878 M [40] BOLT (M24X3X80-MM)  
2. 8T-4167 [60] WASHER-HARD (26X44X4-MM THK)  
3. 7X-2576 M [20] BOLT (M24X3X70-MM)  
4. 096-4755 [4] PIN  
5. 1U-8846 B SEALANT-GASKET (60ML)  
7. 2B-7561 [4] CORK  
8. 5D-1026 [2] CLAMP-BAND  
9. 5P-0767 E HOSE (120CM)  
9A. 5P-0767 HOSE (137CM)  
10. 114-1374 [2] SUPPORT  
11. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
12. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP29900336
 

148-8196: FILTER & LINES GP-GEN MOTOR

148-8196 FILTER & LINES GP-GEN MOTOR
S/N APB1-UP
PART OF 150-7979, 191-5516, 243-0663 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
i00558400 SEBP2990
1488196 FILTER & LINES GP-GEN MOTOR Parts scheme
  For full view, you need register

Parts for your 345B II MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-1320 I [1] HOSE AS  
2. 6V-8398 [1] SEAL-O-RING  
3. 126-2075 Y [1] FILTER GP-OIL  
4. 8E-5502 I [1] HOSE AS  
5. 124-1027 [1] PLATE  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
8. 148-8370 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  6V-9851 [1] ELBOW  
9. 148-8328 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8633 [1] CONNECTOR  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29900337
 

126-2075: FILTER GP-OIL

126-2075 FILTER GP-OIL
S/N APB1-UP
PART OF 148-8196 FILTER & LINES GP-GEN MOTOR, 168-9367 TANK & FILTER GP-HYDRAULIC
ALSO AN ATTACHMENT
i00513844 SEBP2990
1262075 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 345B II MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-7521 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC)  
2. 126-2076 [1] BASE AS-OIL FILTER  
 

#SEBP29900338
 

126-2080: FILTER GP-OIL

126-2080 FILTER GP-OIL
S/N APB1-UP
PART OF 126-2112 FILTER GP-OIL
FIELD REPLACEMENT ORDER @@@@@173-3511@@@@@
i00090402 SEBP2990
1262080 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 345B II MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 137-3814 [2] PIN  
2. 126-2081 [1] FILTER ELEMENT AS-OIL (STANDARD EFFICIENCY)(HYDRAULIC, RETURN)  
3. 095-1681 J [1] SEAL-O-RING  
4. 169-8154 [1] RING-RETAINING  
5. 4J-7533 J [1] SEAL-O-RING  
6. 9S-4180 J [1] PLUG  
7. 137-3621 [1] HANDLE  
8. 137-3628 J [1] SHIM (0.1-MM THK)  
9. 137-3626 M [1] BOLT-SPECIAL (M6X1X23.25-MM)  
10. 6V-7658 J [2] SEAL-O-RING  
11. 137-3623 J [4] SEAL-O-RING  
12. 137-3624 JM [8] SCREW (M3X0.5X5-MM)  
13. 137-3625 J [2] PAD  
14. 137-3810 [1] FILM-INSTRUCTION (HYDRAULIC OIL RETURN FILTER)  
15. 199-7423 [1] PLATE-SLIDE  
16. 137-3818 [1] BASE  
17. 3E-4297 J [1] SEAL-O-RING  
18. 137-3813 JM [6] BOLT-FLANGE HEAD  
19. 095-1510 J [6] SEAL-O-RING  
   
    *ATTENTION* QUANTITIES SHOWN ARE THOSE REQUIRED FOR ONE FILTER GROUP
    VERIFY TOTAL NUMBER OF FILTER GROUPS ON MACHINE BEFORE ORDERING PARTS
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
   
    AVAILABLE REPAIR KIT(S):
  137-3635 J [1] KIT-SERVICE (HYDRAULIC FILTER)(RETURN)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP29900339
 

126-2112: FILTER GP-OIL

126-2112 FILTER GP-OIL
S/N APB1-UP
PART OF 168-9367 TANK & FILTER GP-HYDRAULIC
Type 1
i00513926 SEBP2990
1262112 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 345B II MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-8053 Y [1] BASE GP-OIL FILTER (HYDRAULIC)  
2. 116-3653 Y [2] HOUSING GP-FILTER  
3. 8T-4184 M [16] BOLT (M12X1.75X45-MM)  
4. 8T-4223 [32] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 123-2003 [4] SEAL-O-RING  
6. 8T-0289 M [8] BOLT (M5X0.8X20-MM)  
7. 8T-0328 [8] WASHER-HARD (5.5X10X1-MM THK)  
8. 6V-7609 [2] SEAL-O-RING  
9. 129-8055 [2] FLANGE  
10. 8T-4956 M [10] BOLT (M12X1.75X35-MM)  
11. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
12. 129-8056 [1] COVER  
13. 6J-2680 [4] SEAL-O-RING  
14. 143-8037 [2] INDICATOR AS  
15. 116-3682 [2] SEAL  
16. 116-3654 [2] COVER  
17. 126-2080 Y [2] FILTER GP-OIL  
18. 129-7815 [1] COVER  
19. 095-0759 M [2] SCREW-MACHINE (M6X1X3.4-MM)  
20. 9S-4182 [1] PLUG (7/16-20-THD)  
21. 3J-7354 [1] SEAL-O-RING  
22. 129-8034 [2] VALVE AS-BYPASS  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 345B II MH :

DRIVE GP-SWING
169-5530 DRIVE GP-SWING
DRIVE GP-SWING
169-5529 DRIVE GP-SWING
DRIVE GP-SWING
169-5528 DRIVE GP-SWING
DRIVE GP-AUXILIARY PUMP
216-0041 DRIVE GP-AUXILIARY PUMP
DRIVE GP-AUXILIARY PUMP
177-2543 DRIVE GP-AUXILIARY PUMP
CYLINDER GP-STICK
196-4120 CYLINDER GP-STICK
CYLINDER GP-STICK
150-4115 CYLINDER GP-STICK
CYLINDER GP-BUCKET
118-3935 CYLINDER GP-BUCKET
DRIVE GP-SWING
227-6113 DRIVE GP-SWING
DRIVE GP-SWING
227-6114 DRIVE GP-SWING
DRIVE GP-SWING
227-6156 DRIVE GP-SWING
DRIVE GP-SWING
227-6157 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
169-5527 FASTENER GP-SWING & FINAL DR
FILTER & LINES GP-GEN MOTOR
148-8196 FILTER & LINES GP-GEN MOTOR
FILTER GP-OIL
126-2075 FILTER GP-OIL
FILTER GP-OIL
126-2080 FILTER GP-OIL

Truck sale:

Caterpillar 345BIIMH, Construction
46,000 
Caterpillar 345BIIMH, Construction
- Crawler Excavators
MICHIGAN CAT
CATERPILLAR 345BIIMH 2005
 
CATERPILLAR 345BIIMH 2005
- TRACK EXCAVATORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR 345BIIMH 2005
 
CATERPILLAR 345BIIMH 2005
- LOG LOADERS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.