AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

130-6772 PUMP GP-FUEL INJECTION S/N 9RM1-UP PART OF 106-5001 ENGINE AR-PRIMARY AN ATTACHMENT 416C BACKHOE LOADER


FUEL SYSTEM
PUMP GP-FUEL INJECTION
SEPARATOR GP-WATER
TANK GP-FUEL
BASIC ENGINE
PULLEY GP

BACKHOE LOADER 416C BACKHOE LOADER 5YN
 416C Backhoe Loader Center Pivot, Single Tilt 5YN16590-UP (MACHINE) POWERED BY 3054 Engine SEBP2992 416C 5YN   (1996)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
130-1414 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
130-1416 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
130-6772 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
130-6774 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
148-7178 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
148-7179 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
148-7179 PUMP GP-FUEL INJECTION
 

#SEBP29920190
 

130-6772: PUMP GP-FUEL INJECTION

130-6772 PUMP GP-FUEL INJECTION
S/N 9RM1-UP
PART OF 106-5001 ENGINE AR-PRIMARY
AN ATTACHMENT
i00503299 SEBP2992
1306772 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-6774 Y [1] PUMP GP-FUEL INJECTION  
2. 067-7006 [1] SEAL  
3. 198-5804 [1] GASKET (FUEL PUMP)  
4. 101-3877 [3] STUD (M8X1.25X37-MM)  
5. 6I-0291 M [3] NUT (M8X1.25-THD)  
6. 101-3878 [1] GEAR (56-TEETH)  
7. 101-3888 [1] LINE AS (CYLINDER ONE)  
8. 101-3889 [1] LINE AS (CYLINDER TWO)  
9. 101-3890 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
10. 101-3891 [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
11. 6I-1174 [4] ATOMIZER AS-FUEL  
    (EACH INCLUDES)
  105-2003 [1] HOLDER  
12. 105-3433 [1] NOZZLE  
13. 295-1295 [4] SEAL  
14. 033-7873 [4] WASHER (10.01X20.85X2.03-MM THK)  
15. 101-3895 M [8] BOLT (M8X1.25X35-MM)  
16. 101-3896 [1] LINE-DRAIN  
17. 067-6980 [1] BOLT (M8X1.25-THD)  
18. 067-7011 [8] WASHER (0.323X0.439X0.031-IN THK)  
19. 067-6312 [3] BOLT  
20. 7C-9255 [4] CLAMP  
21. 101-3892 [2] CLIP  
22. 101-3893 [1] CLIP  
24. 111-3422 M [1] NUT (M14X1.5-THD)  
25. 111-3423 [1] WASHER  
26. 5P-6627 D LOCKWIRE (0.1-M)  
27. 7W-0186 [4] SPACER (21.6X26.8X3.2-MM THK)  
  D   ORDER BY THE METER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP29920191
 

130-6774: PUMP GP-FUEL INJECTION

130-6774 PUMP GP-FUEL INJECTION
S/N 9RM1-UP
PART OF 130-6772 PUMP GP-FUEL INJECTION
AN ATTACHMENT
i00503300 SEBP2992
1306774 PUMP GP-FUEL INJECTION Parts scheme 1306774 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-8558 [1] HOUSING  
2. 110-5365 [1] WASHER  
3. 110-5366 [1] WASHER  
4. 110-5367 [1] RING  
5. 118-8386 [1] SHAFT  
6. 116-8564 [1] KEY  
7. 116-7061 [2] SEAL  
8. 116-7062 [1] PLATE  
9. 116-7063 [2] BOLT  
10. 110-5375 [1] COVER  
11. 110-5374 [1] GASKET  
12. 116-8571 [2] BOLT  
13. 116-8569 [1] BOLT  
    -OR-
  149-2537 [1] BOLT  
    -OR-
  149-2538 [1] BOLT  
    -OR-
  149-2540 [1] BOLT  
    -OR-
  149-2542 [1] BOLT  
    -OR-
  149-2544 [1] BOLT  
14. 110-5370 [2] BOLT  
15. 116-8570 [1] BOLT  
16. 110-5397 [2] ROLLER  
17. 293-3719 [2] BOLT  
18. 116-7065 [1] SEAL  
19. 116-7066 [1] PLUG  
20. 110-5377 [1] BOLT  
21. 116-7067 [2] SEAL  
22. 117-1280 [1] COVER  
23. 116-7068 [1] GASKET  
24. 116-7086 [2] WASHER  
25. 116-7069 [2] LOCKNUT  
26. 116-7070 [2] TERMINAL  
27. 116-7071 [2] WASHER  
28. 116-7072 [2] WASHER  
29. 110-5380 [3] BOLT  
30. 135-5016 [1] CAP  
31. 110-5398 [2] RETAINER  
32. 132-7925 [1] CONNECTOR  
33. 116-7073 [1] SEAL  
34. 135-5017 [1] CAP  
35. 116-7074 [1] CAP  
36. 110-5400 [1] SCREEN (INJECTION PUMP)  
37. 110-5401 [1] PLUG  
38. 110-5402 [1] SPRING  
39. 110-5403 [1] PISTON  
40. 116-8575 [1] REGULATOR (FUEL FLOW)  
41. 110-5410 [1] PIN  
42. 116-7075 [1] SEAL  
43. 116-7076 [1] RING  
44. 110-5405 [1] BLADE  
45. 110-5406 [1] LINER  
46. 110-5409 [2] SPRING  
47. 110-5407 [1] RETAINER  
48. 116-7078 [1] SEAL  
49. 110-5386 [1] ROTOR  
50. 116-7079 [1] RING  
51. 116-8593 [1] RING  
52. 116-7085 [2] NUT  
53. 110-5396 [1] BOLT  
54. 117-1076 [1] VALVE  
55. 135-5033 [1] SPRING  
56. 116-7082 [1] STOP  
57. 116-7081 [1] BOLT  
58. 116-8594 [4] CONNECTOR  
59. 116-8596 [1] BOLT  
60. 116-7083 [1] SEAL  
61. 116-8595 [1] PLATE  
62. 116-8574 [2] WASHER  
63. 116-8625 [2] WASHER  
64. 110-5411 [1] WASHER  
65. 116-7088 [1] RETAINER AS  
66. 116-7090 [1] RING  
67. 135-5073 [1] WASHER  
68. 116-7092 [6] WEIGHT  
69. 116-7093 [1] SLEEVE  
70. 116-7094 [1] ARM  
71. 124-5590 [1] SPRING  
72. 116-8607 [1] RETAINER  
73. 116-7097 [1] SPRING  
74. 116-7098 [1] GUIDE  
75. 116-7099 [1] WASHER  
76. [1] STUD  
77. 116-7101 [1] NUT  
78. 132-7926 [1] SEAL  
79. 116-7103 [1] SHAFT  
80. 117-1278 [1] ARM  
80A. 116-8584 B [1] SHIM  
80B. 116-8585 [1] SPRING  
80C. 116-7107 [1] VALVE  
84. 135-5018 [1] SHAFT  
85. 117-1286 [2] BOLT  
86. 116-8618 [2] NUT  
87. 110-5415 [1] SPRING  
88. 116-7112 [2] SPACER  
89. 116-7947 [3] SEAL  
90. 116-7114 [2] LEVER  
91. 116-7115 [1] SPRING  
92. 116-7116 [1] RETAINER  
93. 116-7117 [1] BOLT  
94. 116-7118 [1] LEVER  
95. 117-1287 [1] CLIP  
96. 116-8620 [1] SHAFT  
97. 117-1091 [1] HOOK AS  
  116-7121 [1] HOOK  
97A. 116-7122 [1] BOLT  
99. 116-7123 [1] WASHER  
100. 116-7124 [1] SPRING  
101. 116-7125 [1] LINK  
102. 116-7126 [1] PLUG  
103. 110-5412 [1] RING  
104. 116-7127 [1] SEAL  
105. 135-5034 [1] PISTON  
106. 110-5413 [2] WASHER  
107. 116-7129 [1] PISTON  
108. 116-5414 [1] INJECTOR GP-FUEL  
109. 116-7135 [1] NUT  
110. 110-5416 [1] GUIDE  
111. 116-7130 [2] SEAL-O-RING  
112. 116-8630 [2] SEAL-O-RING  
113. 116-7132 [1] PLUG  
114. 116-7133 [1] BOLT  
   
    AVAILABLE REPAIR KIT(S):
  101-2986 [2] KIT-PUMP GASKET (FUEL INJECTION PUMP)  
  101-3897 [2] KIT-SOLENOID (SHUTOFF)  
  133-3760 [2] KIT-BUSHING (FUEL INJECTION PUMP)  
  133-3759 [2] KIT-BUSHING (FUEL INJECTION PUMP)  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP29920192
 

148-7178: PUMP GP-FUEL INJECTION

148-7178 PUMP GP-FUEL INJECTION
S/N 7BJ9039-UP; 5HK37889-99999
PART OF 122-8804 ENGINE AR-PRIMARY
AN ATTACHMENT
i01038440 SEBP2992
1487178 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6627 D LOCKWIRE (.1M)  
2. 6I-0291 M [3] NUT (M8X1.25-THD)  
3. 067-7006 [1] SEAL  
4. 101-3877 [3] STUD (M8X1.25X37-MM)  
6. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
7. 140-8713 [2] CLIP  
8. 140-8714 [1] CLIP  
9. 140-8718 [4] WASHER  
10. 140-8719 [1] LINE-LEAKOFF  
11. 235-1790 [1] SWITCH-TEMPERATURE  
12. 154-6016 [1] GEAR-PUMP (56-TEETH)  
13. 156-1719 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
13A. 148-7110 [1] HOLDER  
13B. 148-7111 [1] NOZZLE  
14. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
15. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
16. 162-7500 [1] PUMP GP-FUEL INJECTION  
16A. 174-8831 [1] SOLENOID (TIMING ADVANCE)  
16B. 137-6395 [1] COIL AS  
16C. 137-6396 [1] LOCKNUT  
16D. 161-2161 [1] SEAL-O-RING  
16E. 192-9155 [1] CONTROL AS-FUEL RATIO  
17. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
18. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
19. 241-4754 [8] WASHER (6.35X9.75X1.55-MM THK)  
20. 247-9844 [3] BOLT (M6X1X16-MM)  
21. 247-9855 [1] BOLT (M6X1X30-MM)  
   
  107-2348 F [1] CLIP  
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP29920193
 

148-7179: PUMP GP-FUEL INJECTION

148-7179 PUMP GP-FUEL INJECTION
S/N 7BJ9039-UP; 5HK37889-99999
PART OF 122-8803 ENGINE AR-PRIMARY
AN ATTACHMENT
i01043979 SEBP2992
1487179 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-7499 [1] PUMP GP-FUEL INJECTION  
1A. 137-6395 [1] COIL AS  
1B. 137-6396 [1] LOCKNUT  
1C. 174-8831 [1] SOLENOID (TIMING ADVANCE)  
2. 5P-6627 D LOCKWIRE (.1M)  
3. 6I-0291 M [3] NUT (M8X1.25-THD)  
4. 033-7625 [1] ELBOW  
5. 365-3308 [1] NUT-COMPRESSION  
6. 067-6265 [1] FITTING-BRASS  
7. 067-7006 [1] SEAL  
8. 101-3877 [3] STUD (M8X1.25X37-MM)  
9. 107-2348 [2] CLIP  
10. 107-2349 [1] HOSE  
11. 124-3713 [1] CONNECTION  
12. 124-3714 [3] BOLT  
13. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
14. 140-8718 [4] WASHER  
15. 140-8719 [1] LINE-LEAKOFF  
16. 140-8720 [8] WASHER  
17. 149-4910 [1] SWITCH (TIMING ADVANCE)  
18. 162-0807 [1] LEAD  
19. 154-6016 [1] GEAR-PUMP (56-TEETH)  
20. 173-6634 [1] TUBE AS  
21. 148-7108 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
21A. 148-7110 [1] HOLDER  
21B. 148-7111 [1] NOZZLE  
22. 140-8713 [2] CLIP  
23. 140-8714 [1] CLIP  
24. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
25. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
26. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
27. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
   
  121-4592 F [2] CLIP  
  121-4593 F [1] CLIP  
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP29920194
 

148-7179: PUMP GP-FUEL INJECTION

148-7179 PUMP GP-FUEL INJECTION
S/N 7BJ9039-UP
PART OF 122-8803 ENGINE AR-PRIMARY
AN ATTACHMENT
i01360254 SEBP2992
1487179 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-7499 [1] PUMP GP-FUEL INJECTION  
1A. 137-6396 [1] LOCKNUT  
2. 5P-6627 D LOCKWIRE (.1M)  
3. 6I-0291 M [3] NUT (M8X1.25-THD)  
4. 033-7625 [1] ELBOW  
5. 365-3308 [1] NUT-COMPRESSION  
6. 067-6265 [1] FITTING-BRASS  
7. 067-7006 [1] SEAL  
8. 101-3877 [3] STUD (M8X1.25X37-MM)  
9. 107-2348 [2] CLIP  
10. 107-2349 [1] HOSE  
11. 247-9855 [1] BOLT (M6X1X30-MM)  
12. 247-9844 [3] BOLT (M6X1X16-MM)  
13. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
14. 140-8718 [4] WASHER  
15. 140-8719 [1] LINE-LEAKOFF  
16. 241-4754 [8] WASHER (6.35X9.75X1.55-MM THK)  
17. 235-1790 [1] SWITCH-TEMPERATURE (TIMING ADVANCE)  
18. 162-0807 [1] LEAD  
19. 154-6016 [1] GEAR-PUMP (56-TEETH)  
20. 173-6634 [1] TUBE AS  
21. 156-1719 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
21A. 148-7110 [1] HOLDER  
21B. 148-7111 [1] NOZZLE  
22. 140-8713 [2] CLIP  
23. 140-8714 [1] CLIP  
24. 163-8673 [1] LINE AS-FUEL INJECTION (CYLINDER ONE)  
25. 163-8674 [1] LINE AS-FUEL INJECTION (CYLINDER TWO)  
26. 160-2336 [1] LINE AS-FUEL INJECTION (CYLINDER THREE)  
27. [1] LINE AS-FUEL INJECTION (CYLINDER FOUR)  
   
  121-4592 F [2] CLIP  
  121-4593 F [1] CLIP  
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP29920195
 

7E-4636: SEPARATOR GP-WATER

7E-4636 SEPARATOR GP-WATER
S/N 5YN16590-UP
PART OF 154-5384 INSTALLATION AR-ENGINE
i00405056 SEBP2992
7E4636 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7092 Y [1] FILTER GP-WATER SEP & FUEL  
2. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
3. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
4. 130-7964 [1] TUBE AS  
5. 127-8167 [2] CLIP  
6. 9R-2603 [1] TUBE AS  
7. 4H-2494 [3] SLEEVE-FITTING  
8. 033-7849 [2] PLUG  
9. 032-8100 [2] WASHER (0.531X0.718X0.064-IN THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29920196
 

106-1379: TANK GP-FUEL

106-1379 TANK GP-FUEL
S/N 5YN16590-UP
PART OF 154-5483 CHASSIS AR
i01152876 SEBP2992
1061379 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6442 E HOSE (59-CM)  
2. 1P-4278 [4] CLAMP-HOSE  
3. 9R-7240 [1] GASKET  
4. 116-4808 [1] TUBE  
5. 118-6846 [1] TREAD  
6. 128-2875 [1] SENDER AS-FUEL LEVEL  
  9X-8491 [2] NUT (10-32-THD)  
  9X-8862 [2] LOCKWASHER  
7. 149-7678 [1] TUBE AS  
8. 149-7679 [1] TUBE AS  
9. 149-7681 [1] PLATE AS  
10. 164-3876 C [1] STEP AS  
11. 195-5642 Y [1] TANK GP-FUEL  
12. 123-4950 M [2] SCREW-PAN HEAD (M6X1X16-MM)  
13. 2B-2404 [2] CLIP  
14. 5P-4116 [7] WASHER-HARD (8.8X20.5X2-MM THK)  
15. 6K-5967 [1] CLIP  
16. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
18. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
19. 8T-4189 M [7] BOLT (M8X1.25X20-MM)  
20. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
21. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
22. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
24. 5P-6442 E HOSE (98-CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29920197
 

195-5642: TANK GP-FUEL

195-5642 TANK GP-FUEL
S/N 5YN16590-UP
PART OF 106-1379 TANK GP-FUEL
i01459591 SEBP2992
1955642 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 159-1878 [1] TANK AS  
1A. 123-4950 M [8] SCREW-PAN HEAD (M6X1X16-MM)  
1B. 7X-2644 [1] CAP  
1C. 106-8020 [1] GASKET  
1D. 118-6848 [1] PLATE  
2. 148-8316 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8647 [1] CONNECTOR  
3. 148-8407 [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
  M   METRIC PART
 

#SEBP29920198
 

105-2812: ALTERNATOR GP-CHARGING

105-2812 ALTERNATOR GP-CHARGING
S/N 5YN16590-UP
12 VOLT, 55 AMP
PART OF 121-5830, 137-3507 ALTERNATOR GP-CHARGING
AN ATTACHMENT
i00479586 SEBP2992
1052812 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [1] NUT (M6X1-THD)  
2. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 1H-3244 [1] LOCKWASHER  
4. 114-2863 [1] PULLEY-ALTERNATOR  
5. 114-2865 [1] FRAME AS-ALTERNATOR  
6. 114-2866 [1] ROTOR AS-ALTERNATOR  
7. 114-2867 [1] FRAME-ALTERNATOR  
8. 114-2868 [1] REGULATOR AS-ALTERNATOR  
9. 114-2869 [1] RECTIFIER AS-ALTERNATOR  
10. 114-2870 [1] HOLDER AS  
11. 114-2871 [1] COVER-ALTERNATOR  
12. 114-2872 [1] BUSHING-ALTERNATOR  
   
    AVAILABLE REPAIR KIT(S):
  114-2873 [1] KIT-ALTERNATOR BEARING  
    (INCLUDES COVERS, BEARINGS, WASHER,PLATE & SCREW)
  114-2874 [1] KIT-ALTERNATOR HARDWARE  
    (INCLUDES NUTS & BOLTS)
  114-2875 [1] KIT-ALTERNATOR HARDWARE  
    (INCLUDES SCREWS)
  M   METRIC PART
 

#SEBP29920199
 

105-2813: ALTERNATOR GP-CHARGING

105-2813 ALTERNATOR GP-CHARGING
S/N 5YN16590-UP
12-VOLT. 90-AMP
PART OF 121-5831, 121-5832 ALTERNATOR GP-CHARGING
AN ATTACHMENT
i00798710 SEBP2992
1052813 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-4457 [1] PULLEY-ALTERNATOR  
2. 113-4459 [1] FRAME AS-ALTERNATOR  
3. 113-4460 [1] ROTOR AS-ALTERNATOR  
4. 113-4461 [1] FRAME AS-ALTERNATOR  
5. 113-4462 [1] REGULATOR AS-ALTERNATOR  
6. 113-4463 [1] RECTIFIER AS-ALTERNATOR  
7. 113-4464 [1] COVER-ALTERNATOR  
8. 113-4469 [4] BUSHING-ALTERNATOR  
9. 113-4470 [1] BUSHING-ALTERNATOR  
10. 5C-2890 M [1] NUT (M6X1-THD)  
11. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 1H-3244 [1] LOCKWASHER  
   
    AVAILABLE REPAIR KIT(S):
  113-4465 [1] KIT-ALTERNATOR BEARING  
    (INCLUDES COVERS, BEARINGS, WASHER, PLATE & SCREW)
  113-4466 [1] KIT-REPAIR (ALTERNATOR BRUSHES)  
    (INCLUDES SEALS & HOLDER AS)
  113-4467 [1] KIT-ALTERNATOR TERMINAL  
    (INCLUDES NUTS, PLATE & SCREW)
  113-4468 [1] KIT-ALTERNATOR HARDWARE  
    (INCLUDES SCREWS)
  M   METRIC PART
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Specifications
Fuel Injection Pump
3054 Engine
Fuel Injection Nozzles
3054 Engine
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Testing and Adjusting
Fuel Injection Nozzle - Test
3054 Engine
Disassembly and Assembly
Fuel Injection Nozzles - Remove - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Remove
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Install - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Install
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Remove - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Install - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Remove - Type 2 Engines and 7BJ Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Install - Type 2 Engines and 7BJ Engines
3054 Engine for Caterpillar Built Machines
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 416C :

PUMP GP-FUEL INJECTION
130-1416 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
130-1414 PUMP GP-FUEL INJECTION
166-0501 KIT-INJECTOR
FITTING GP-FUEL LINES
130-4646 FITTING GP-FUEL LINES
FILTER GP-WATER SEP & FUEL
130-7092 FILTER GP-WATER SEP & FUEL
FILTER GP-FUEL
138-3096 FILTER GP-FUEL
FILTER GP-FUEL
130-1419 FILTER GP-FUEL
FILTER GP-FUEL
130-1419 FILTER GP-FUEL
PUMP GP-FUEL INJECTION
130-6774 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
148-7178 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
148-7179 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
148-7179 PUMP GP-FUEL INJECTION
SEPARATOR GP-WATER
7E-4636 SEPARATOR GP-WATER
TANK GP-FUEL
106-1379 TANK GP-FUEL
TANK GP-FUEL
195-5642 TANK GP-FUEL
ALTERNATOR GP-CHARGING
105-2812 ALTERNATOR GP-CHARGING

Truck sale:

Caterpillar 416C
 
Caterpillar 416C
- backhoe loader
FOLEY, INC.
Caterpillar 416C, bucket, Construction
4,063 
Caterpillar 416C, bucket, Construction
- bucket
FINNING CANADA
 
37,100 
Caterpillar 416C, backhoe loader, Construction


 
26,000 
Caterpillar 416C, backhoe loader, Construction


 
34,000 
Caterpillar 416C, backhoe loader, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.