148-7178 PUMP GP-FUEL INJECTION S/N 7BJ1-UP PART OF 122-8804 ENGINE AR-PRIMARY AN ATTACHMENT 416C BACKHOE LOADER

FUEL SYSTEM

PUMP GP-FUEL INJECTION

0. 148-7178 PUMP GP-FU
1. 148-7179 PUMP GP-FU
2. 148-7179 PUMP GP-FU

SEPARATOR GP-WATER

3. 7E-4636 SEPARATOR

TANK GP-FUEL

4. 106-1379 TANK GP-FU
5. 195-5642 TANK GP-FU

BASIC ENGINE

PULLEY GP

6. 105-2812 ALTERNATOR
7. 105-2813 ALTERNATOR
8. 121-5830 ALTERNATOR
9. 121-5831 ALTERNATOR
0. INFORMATION

BACKHOE LOADER 416C BACKHOE LOADER 1XR
416C Backhoe Loader Center Pivot, Parallel Lift 1XR02250-02261 (MACHINE) POWERED BY 3054 Engine SEBP2993 416C 1XR (1996)

FUEL SYSTEM

PUMP GP-FUEL INJECTION

130-1414 PUMP GP-FUEL INJECTION

130-1416 PUMP GP-FUEL INJECTION

148-7178 PUMP GP-FUEL INJECTION

148-7179 PUMP GP-FUEL INJECTION

#SEBP29930160

148-7178: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

148-7178 PUMP GP-FUEL INJECTION
S/N 7BJ1-UP
PART OF 122-8804 ENGINE AR-PRIMARY
AN ATTACHMENT

i01038440 SEBP2993

1487178 PUMP GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-6627 D		LOCKWIRE (.1M)
2.	6I-0291 M	[3]	NUT (M8X1.25-THD)
3.	067-7006	[1]	SEAL
4.	101-3877	[3]	STUD (M8X1.25X37-MM)
6.	124-3815 M	[4]	BOLT (M8X1.25X16-MM)
7.	140-8713	[2]	CLIP
8.	140-8714	[1]	CLIP
9.	140-8718	[4]	WASHER
10.	140-8719	[1]	LINE-LEAKOFF
11.	235-1790	[1]	SWITCH-TEMPERATURE
12.	154-6016	[1]	GEAR-PUMP (56-TEETH)
13.	156-1719	[4]	INJECTOR AS-FUEL
			(EACH INCLUDES)
13A.	148-7110	[1]	HOLDER
13B.	148-7111	[1]	NOZZLE
14.	160-2336	[1]	LINE AS-FUEL INJECTION (CYLINDER THREE)
15.		[1]	LINE AS-FUEL INJECTION (CYLINDER FOUR)
16.	162-7500	[1]	PUMP GP-FUEL INJECTION
16A.	174-8831	[1]	SOLENOID (TIMING ADVANCE)
16B.	137-6395	[1]	COIL AS
16C.	137-6396	[1]	LOCKNUT
16D.	161-2161	[1]	SEAL-O-RING
16E.	192-9155	[1]	CONTROL AS-FUEL RATIO
17.	163-8673	[1]	LINE AS-FUEL INJECTION (CYLINDER ONE)
18.	163-8674	[1]	LINE AS-FUEL INJECTION (CYLINDER TWO)
19.	241-4754	[8]	WASHER (6.35X9.75X1.55-MM THK)
20.	247-9844	[3]	BOLT (M6X1X16-MM)
21.	247-9855	[1]	BOLT (M6X1X30-MM)

	107-2348 F	[1]	CLIP
	D		ORDER BY THE METER
	F		NOT SHOWN
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP29930161

148-7179: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

148-7179 PUMP GP-FUEL INJECTION
S/N 7BJ1-UP
PART OF 122-8803 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT

i01043979 SEBP2993

1487179 PUMP GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	162-7499	[1]	PUMP GP-FUEL INJECTION
1A.	137-6395	[1]	COIL AS
1B.	137-6396	[1]	LOCKNUT
1C.	174-8831	[1]	SOLENOID (TIMING ADVANCE)
2.	5P-6627 D		LOCKWIRE (.1M)
3.	6I-0291 M	[3]	NUT (M8X1.25-THD)
4.	033-7625	[1]	ELBOW
5.	365-3308	[1]	NUT-COMPRESSION
6.	067-6265	[1]	FITTING-BRASS
7.	067-7006	[1]	SEAL
8.	101-3877	[3]	STUD (M8X1.25X37-MM)
9.	107-2348	[2]	CLIP
10.	107-2349	[1]	HOSE
11.	124-3713	[1]	CONNECTION
12.	124-3714	[3]	BOLT
13.	124-3815 M	[4]	BOLT (M8X1.25X16-MM)
14.	140-8718	[4]	WASHER
15.	140-8719	[1]	LINE-LEAKOFF
16.	140-8720	[8]	WASHER
17.	149-4910	[1]	SWITCH (TIMING ADVANCE)
18.	162-0807	[1]	LEAD
19.	154-6016	[1]	GEAR-PUMP (56-TEETH)
20.	173-6634	[1]	TUBE AS
21.	148-7108	[4]	INJECTOR AS-FUEL
			(EACH INCLUDES)
21A.	148-7110	[1]	HOLDER
21B.	148-7111	[1]	NOZZLE
22.	140-8713	[2]	CLIP
23.	140-8714	[1]	CLIP
24.	163-8673	[1]	LINE AS-FUEL INJECTION (CYLINDER ONE)
25.	163-8674	[1]	LINE AS-FUEL INJECTION (CYLINDER TWO)
26.	160-2336	[1]	LINE AS-FUEL INJECTION (CYLINDER THREE)
27.		[1]	LINE AS-FUEL INJECTION (CYLINDER FOUR)

	121-4592 F	[2]	CLIP
	121-4593 F	[1]	CLIP
	D		ORDER BY THE METER
	F		NOT SHOWN
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP29930162

148-7179: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

148-7179 PUMP GP-FUEL INJECTION
S/N 7BJ1-UP
PART OF 122-8803 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT

i01360254 SEBP2993

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	162-7499	[1]	PUMP GP-FUEL INJECTION
1A.	137-6396	[1]	LOCKNUT
2.	5P-6627 D		LOCKWIRE (.1M)
3.	6I-0291 M	[3]	NUT (M8X1.25-THD)
4.	033-7625	[1]	ELBOW
5.	365-3308	[1]	NUT-COMPRESSION
6.	067-6265	[1]	FITTING-BRASS
7.	067-7006	[1]	SEAL
8.	101-3877	[3]	STUD (M8X1.25X37-MM)
9.	107-2348	[2]	CLIP
10.	107-2349	[1]	HOSE
11.	247-9855	[1]	BOLT (M6X1X30-MM)
12.	247-9844	[3]	BOLT (M6X1X16-MM)
13.	124-3815 M	[4]	BOLT (M8X1.25X16-MM)
14.	140-8718	[4]	WASHER
15.	140-8719	[1]	LINE-LEAKOFF
16.	241-4754	[8]	WASHER (6.35X9.75X1.55-MM THK)
17.	235-1790	[1]	SWITCH-TEMPERATURE (TIMING ADVANCE)
18.	162-0807	[1]	LEAD
19.	154-6016	[1]	GEAR-PUMP (56-TEETH)
20.	173-6634	[1]	TUBE AS
21.	156-1719	[4]	INJECTOR AS-FUEL
			(EACH INCLUDES)
21A.	148-7110	[1]	HOLDER
21B.	148-7111	[1]	NOZZLE
22.	140-8713	[2]	CLIP
23.	140-8714	[1]	CLIP
24.	163-8673	[1]	LINE AS-FUEL INJECTION (CYLINDER ONE)
25.	163-8674	[1]	LINE AS-FUEL INJECTION (CYLINDER TWO)
26.	160-2336	[1]	LINE AS-FUEL INJECTION (CYLINDER THREE)
27.		[1]	LINE AS-FUEL INJECTION (CYLINDER FOUR)

	121-4592 F	[2]	CLIP
	121-4593 F	[1]	CLIP
	D		ORDER BY THE METER
	F		NOT SHOWN
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP29930163

7E-4636: SEPARATOR GP-WATER

SEPARATOR GP-WATER

7E-4636 SEPARATOR GP-WATER
S/N 1XR2250-2261
PART OF 154-5384 INSTALLATION AR-ENGINE

i00405056 SEBP2993

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-7092 Y	[1]	FILTER GP-WATER SEP & FUEL
2.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
3.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
4.	130-7964	[1]	TUBE AS
5.	127-8167	[2]	CLIP
6.	9R-2603	[1]	TUBE AS
7.	4H-2494	[3]	SLEEVE-FITTING
8.	033-7849	[2]	PLUG
9.	032-8100	[2]	WASHER (0.531X0.718X0.064-IN THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP29930164

106-1379: TANK GP-FUEL

TANK GP-FUEL

106-1379 TANK GP-FUEL
S/N 1XR2250-2261
PART OF 154-5484 CHASSIS AR

i01152876 SEBP2993

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-6442 E		HOSE (59-CM)
2.	1P-4278	[4]	CLAMP-HOSE
3.	9R-7240	[1]	GASKET
4.	116-4808	[1]	TUBE
5.	118-6846	[1]	TREAD
6.	128-2875	[1]	SENDER AS-FUEL LEVEL
	9X-8491	[2]	NUT (10-32-THD)
	9X-8862	[2]	LOCKWASHER
7.	149-7678	[1]	TUBE AS
8.	149-7679	[1]	TUBE AS
9.	149-7681	[1]	PLATE AS
10.	164-3876 C	[1]	STEP AS
11.	195-5642 Y	[1]	TANK GP-FUEL
12.	123-4950 M	[2]	SCREW-PAN HEAD (M6X1X16-MM)
13.	2B-2404	[2]	CLIP
14.	5P-4116	[7]	WASHER-HARD (8.8X20.5X2-MM THK)
15.	6K-5967	[1]	CLIP
16.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4179 M	[1]	BOLT (M12X1.75X20-MM)
18.	8T-4183 M	[4]	BOLT (M12X1.75X40-MM)
19.	8T-4189 M	[7]	BOLT (M8X1.25X20-MM)
20.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
21.	8T-4200 M	[4]	BOLT (M8X1.25X16-MM)
22.	8T-4223	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
23.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
24.	5P-6442 E		HOSE (98-CM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP29930165

195-5642: TANK GP-FUEL

TANK GP-FUEL

195-5642 TANK GP-FUEL
S/N 1XR2250-2261
PART OF 106-1379 TANK GP-FUEL

i01459591 SEBP2993

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	159-1878	[1]	TANK AS
1A.	123-4950 M	[8]	SCREW-PAN HEAD (M6X1X16-MM)
1B.	7X-2644	[1]	CAP
1C.	106-8020	[1]	GASKET
1D.	118-6848	[1]	PLATE
2.	148-8316	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3J-7354	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	6V-8647	[1]	CONNECTOR
3.	148-8407	[1]	PLUG AS
	3J-1907	[1]	SEAL-O-RING
	9S-4191	[1]	PLUG (9/16-18-THD)
	M		METRIC PART

#SEBP29930166

105-2812: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

105-2812 ALTERNATOR GP-CHARGING
S/N 1XR2250-2261
12 VOLT, 55 AMP
PART OF 121-5830, 137-3507 ALTERNATOR GP-CHARGING
AN ATTACHMENT

i00479586 SEBP2993

1052812 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5C-2890 M	[1]	NUT (M6X1-THD)
2.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
3.	1H-3244	[1]	LOCKWASHER
4.	114-2863	[1]	PULLEY-ALTERNATOR
5.	114-2865	[1]	FRAME AS-ALTERNATOR
6.	114-2866	[1]	ROTOR AS-ALTERNATOR
7.	114-2867	[1]	FRAME-ALTERNATOR
8.	114-2868	[1]	REGULATOR AS-ALTERNATOR
9.	114-2869	[1]	RECTIFIER AS-ALTERNATOR
10.	114-2870	[1]	HOLDER AS
11.	114-2871	[1]	COVER-ALTERNATOR
12.	114-2872	[1]	BUSHING-ALTERNATOR

			AVAILABLE REPAIR KIT(S):
	114-2873	[1]	KIT-ALTERNATOR BEARING
			(INCLUDES COVERS, BEARINGS, WASHER,PLATE & SCREW)
	114-2874	[1]	KIT-ALTERNATOR HARDWARE
			(INCLUDES NUTS & BOLTS)
	114-2875	[1]	KIT-ALTERNATOR HARDWARE
			(INCLUDES SCREWS)
	M		METRIC PART

#SEBP29930167

105-2813: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

105-2813 ALTERNATOR GP-CHARGING
S/N 1XR2250-2261
12-VOLT. 90-AMP
PART OF 121-5831, 121-5832 ALTERNATOR GP-CHARGING
AN ATTACHMENT

i00798710 SEBP2993

1052813 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	113-4457	[1]	PULLEY-ALTERNATOR
2.	113-4459	[1]	FRAME AS-ALTERNATOR
3.	113-4460	[1]	ROTOR AS-ALTERNATOR
4.	113-4461	[1]	FRAME AS-ALTERNATOR
5.	113-4462	[1]	REGULATOR AS-ALTERNATOR
6.	113-4463	[1]	RECTIFIER AS-ALTERNATOR
7.	113-4464	[1]	COVER-ALTERNATOR
8.	113-4469	[4]	BUSHING-ALTERNATOR
9.	113-4470	[1]	BUSHING-ALTERNATOR
10.	5C-2890 M	[1]	NUT (M6X1-THD)
11.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
12.	1H-3244	[1]	LOCKWASHER

			AVAILABLE REPAIR KIT(S):
	113-4465	[1]	KIT-ALTERNATOR BEARING
			(INCLUDES COVERS, BEARINGS, WASHER, PLATE & SCREW)
	113-4466	[1]	KIT-REPAIR (ALTERNATOR BRUSHES)
			(INCLUDES SEALS & HOLDER AS)
	113-4467	[1]	KIT-ALTERNATOR TERMINAL
			(INCLUDES NUTS, PLATE & SCREW)
	113-4468	[1]	KIT-ALTERNATOR HARDWARE
			(INCLUDES SCREWS)
	M		METRIC PART

#SEBP29930168

121-5830: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

121-5830 ALTERNATOR GP-CHARGING
S/N 1XR2250-2261
FOR USE WITH NON AIR CONDITIONED MACHINES WITHOUT EXTRA WORK LIGHTS
AN ATTACHMENT

i00484152 SEBP2993

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
105-2812 Y	[1]	ALTERNATOR GP-CHARGING
7W-3896	[1]	V-BELT SET (INCLUDES 2-BELTS)
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP29930169

121-5831: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

121-5831 ALTERNATOR GP-CHARGING
S/N 1XR2250-2261
FOR USE WITH NON AIR CONDITIONED MACHINES WITH WORK LIGHTS
AN ATTACHMENT

i00484156 SEBP2993

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
105-2813 Y	[1]	ALTERNATOR GP-CHARGING
7W-3896	[1]	V-BELT SET (INCLUDES 2-BELTS)
		(INCLUDES 2 BELTS)
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

Information:

FUEL SYSTEM

PUMP GP-FUEL INJECTION

Truck Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01

Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Operation and Maintenance Manual

Engine Valve Lash - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Special Instruction

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Technical Information Bulletin

O-Ring Seal Between Drive End Of Fuel Injection Pump And Back Side Of Front Housing
O-Ring Seal Between Drive End Of Fuel Injection Pump And Back Side Of Front Housing

Specifications

Fuel Injection Pump
3054 Engine

Fuel Injection Nozzles
3054 Engine

Tool Operating Manual

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}

Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}

Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}

Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}

169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}

Reuse And Salvage Guidelines

Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Testing and Adjusting

Fuel Injection Nozzle - Test
3054 Engine

Disassembly and Assembly

Fuel Injection Nozzles - Remove - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines

Fuel Injection Nozzles - Remove
3054 Engine for Caterpillar Built Machines

Fuel Injection Nozzles - Install - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines

Fuel Injection Nozzles - Install
3054 Engine for Caterpillar Built Machines

Fuel Injection Pump - Remove - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines

Fuel Injection Pump - Install - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines

Fuel Injection Pump - Remove - Type 2 Engines and 7BJ Engines
3054 Engine for Caterpillar Built Machines

Fuel Injection Pump - Install - Type 2 Engines and 7BJ Engines
3054 Engine for Caterpillar Built Machines

Service Magazine

Proper Procedure For Servicing And Cleaning The Fuel Injection Pump{1251}
1996/10/21

Correct Service Interval For Water Separator{1251,1280}
1998/03/16

Use 136-3113 Timing Gauge To Time Engines With Bosch Pump {1251}
1998/08/17

Fuel Injection Pump Usage With Emissions Certified 3054 Engines In C-Series Backhoe Loaders {1251}
1998/09/07

O-Ring Seal For Fuel Injection Pump Groups Is Now Serviced{1251}
1998/10/26

Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
1998/11/09

Use 157-3719 Spanner For Removing And Installing Bosch Fuel Pumps {1251}
1999/03/08

Cold Start Advance Solenoid Available {1272,1250}
1999/05/17

Cold Start Advance Solenoid Available {1272,1250}
1999/08/02

Remanufactured Stanadyne Fuel Injection Pumps are now available for 3054 and 3056 Engines {1251}
2000/10/02

Corrections to Parts Manuals for Backhoe Loaders {1251}
2001/01/29

Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Support for Fuel Injection Pumps {1251}
2008/07/14

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 416C :

130-1416 PUMP GP-FUEL INJECTION

130-1414 PUMP GP-FUEL INJECTION

166-0501 KIT-INJECTOR

130-4646 FITTING GP-FUEL LINES

130-7092 FILTER GP-WATER SEP & FUEL

138-3096 FILTER GP-FUEL

130-1419 FILTER GP-FUEL

160-0148 FILTER & LINES GP-FUEL

148-7179 PUMP GP-FUEL INJECTION

7E-4636 SEPARATOR GP-WATER

106-1379 TANK GP-FUEL

195-5642 TANK GP-FUEL

105-2812 ALTERNATOR GP-CHARGING

105-2813 ALTERNATOR GP-CHARGING

121-5830 ALTERNATOR GP-CHARGING

Truck sale:

Caterpillar 416C
- backhoe loader
FOLEY, INC.

4,063

Caterpillar 416C, bucket, Construction
- bucket
FINNING CANADA

37,100

Caterpillar 416C, backhoe loader, Construction

26,000

Caterpillar 416C, backhoe loader, Construction

34,000

Caterpillar 416C, backhoe loader, Construction