166-9301 WIRING GP-RIDE CONTROL S/N 1XR2250-2261 PART OF 163-9209 KIT-RIDE CONTROL AN ATTACHMENT 416C

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 166-9301 WIRING GP-
1. 175-6771 WIRING GP-
2. 175-6775 WIRING GP-
3. 136-7436 WIRING GP-
4. 147-2732 WIRING GP-

POWER TRAIN

AXLE GP

5. 114-0165 AXLE & MTG

BRAKING SYSTEM

BRAKE GP

6. 154-5472 AXLE GP-DR
7. 174-5451 AXLE GP-DR
8. 156-2857 AXLE GP-RE

POWER TRAIN

WHEEL GP

9. 150-1281 CHART-WHEE
0. INFORMATION

BACKHOE LOADER 416C BACKHOE LOADER 1XR
416C Backhoe Loader Center Pivot, Parallel Lift 1XR02250-02261 (MACHINE) POWERED BY 3054 Engine SEBP2993 416C 1XR (1996)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

163-9228 WIRING GP-RIDE CONTROL

166-9300 WIRING GP-RIDE CONTROL

166-9301 WIRING GP-RIDE CONTROL

175-6771 WIRING GP-RIDE CONTROL

175-6775 WIRING GP-RIDE CONTROL

136-7436 WIRING GP-STABILIZER ALARM

#SEBP29930240

166-9301: WIRING GP-RIDE CONTROL

WIRING GP-RIDE CONTROL

166-9301 WIRING GP-RIDE CONTROL
S/N 1XR2250-2261
PART OF 163-9209 KIT-RIDE CONTROL
AN ATTACHMENT

i01085546 SEBP2993

1669301 WIRING GP-RIDE CONTROL Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	163-4535	[1]	SWITCH AS (RIDE CONTROL)
	111-7899	[1]	GASKET
2.	163-1391	[1]	HARNESS AS-RIDE CONTROL (FRONT INSTRUMENT PANEL)
	111-7898	[1]	CONNECTOR (8-PIN)
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[21]	STRAP-CABLE
	5P-4571	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	5P-5694	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	112-9611	[1]	TERMINAL-BLADE (18-GA TO 20-GA)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3.	163-4531	[1]	PLATE AS (LH)
4.	3E-7572	[1]	RELAY AS (12-VOLT)
5.	9W-0267	[1]	CLIP-RELAY
6.	106-8704	[1]	SUPPRESSOR AS-ARC
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
7.	163-3137	[1]	HARNESS AS-RIDE CONTROL (PLATFORM)
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[1]	STRAP-CABLE
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	197-3173	[1]	HARNESS AS-RIDE CONTROL (FRAME)
	8T-8729	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
9.	131-9203	[1]	SWITCH AS-PRESSURE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
10.	113-8491	[1]	FUSE (15-AMPERE)
11.	145-9986	[1]	HARNESS AS-PANEL (QUICK COUPLER SWITCHES, SOL)
	111-7898	[2]	CONNECTOR (8-PIN)
	8T-8737	[1]	PLUG-SEAL
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[14]	STRAP-CABLE
	5P-4571	[1]	TERMINAL-BLADE (14-GA TO 16-GA)
	5P-5694	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
	112-9611	[5]	TERMINAL-BLADE (18-GA TO 20-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
12.	163-4532	[1]	PLATE AS (RH)
13.	163-4533	[1]	PLATE (RH)
14.	4P-8134	[1]	CLIP (LADDER)
17.	3S-2093	[21]	STRAP-CABLE
19.	3J-1907	[1]	SEAL-O-RING
	D		ORDER BY THE METER

#SEBP29930241

175-6771: WIRING GP-RIDE CONTROL

WIRING GP-RIDE CONTROL

175-6771 WIRING GP-RIDE CONTROL
S/N 1XR2250-2261
PART OF 175-6773 CONTROL AR-RIDE
AN ATTACHMENT

i01168341 SEBP2993

1756771 WIRING GP-RIDE CONTROL Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	175-6769	[1]	SWITCH AS-ROCKER (RIDE CONTROL)
	111-7899	[1]	GASKET
2.	163-1390	[1]	HARNESS AS-RIDE CONTROL (FRONT CONSOLE)
	111-7898	[1]	CONNECTOR (8-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8730	[10]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[21]	STRAP-CABLE
	5P-4571	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	5P-5694	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	112-9611	[5]	TERMINAL-BLADE (18-GA TO 20-GA)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(2-DM)
3.	4P-8134	[1]	CLIP (LADDER)
4.	3E-7572	[1]	RELAY AS (12-VOLT)
5.	9W-0267	[1]	CLIP-RELAY
6.	189-3158	[1]	SUPPRESSOR-ARC
7.	163-3136	[1]	HARNESS AS-RIDE CONTROL (PLATFORM)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3389	[1]	WEDGE-RECEPTACLE LOCK (8-PIN)
	8T-8729	[8]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
8.	197-3174	[1]	HARNESS AS-RIDE CONTROL (CHASSIS)
	8T-8729	[11]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[2]	PLUG-SEAL
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	3E-3389	[1]	WEDGE-RECEPTACLE LOCK (8-PIN)
9.	131-9203	[1]	SWITCH AS-PRESSURE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
10.	113-8491	[1]	FUSE (15-AMPERE)
17.	3S-2093	[17]	STRAP-CABLE
19.	3J-1907	[1]	SEAL-O-RING
	D		ORDER BY THE METER

#SEBP29930242

175-6775: WIRING GP-RIDE CONTROL

WIRING GP-RIDE CONTROL

175-6775 WIRING GP-RIDE CONTROL
S/N 1XR2250-2261
PART OF 175-6777 KIT-RIDE CONTROL
AN ATTACHMENT

i01164866 SEBP2993

1756775 WIRING GP-RIDE CONTROL Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	175-6769	[1]	SWITCH AS-ROCKER (RIDE CONTROL)
	111-7899	[1]	GASKET
2.	163-1390	[1]	HARNESS AS-RIDE CONTROL (FRONT CONSOLE)
	111-7898	[1]	CONNECTOR (8-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8730	[10]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[21]	STRAP-CABLE
	5P-4571	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	5P-5694	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	112-9611	[5]	TERMINAL-BLADE (18-GA TO 20-GA)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)
3.	163-4531	[1]	PLATE AS (LH)
4.	3E-7572	[1]	RELAY AS (12-VOLT)
5.	9W-0267	[1]	CLIP-RELAY
6.	106-8704	[1]	SUPPRESSOR AS-ARC
7.	163-3136	[1]	HARNESS AS-RIDE CONTROL (PLATFORM)
	8T-8729	[8]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
8.	197-3174	[1]	HARNESS AS-RIDE CONTROL (CHASSIS)
	8T-8729	[11]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[2]	PLUG-SEAL
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
9.	131-9203	[1]	SWITCH AS-PRESSURE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
10.	113-8491	[1]	FUSE (15-AMPERE)
11.	4P-8134	[1]	CLIP (LADDER)
17.	3S-2093	[17]	STRAP-CABLE
19.	3J-1907	[1]	SEAL-O-RING
	D		ORDER BY THE METER

#SEBP29930243

136-7436: WIRING GP-STABILIZER ALARM

WIRING GP-STABILIZER ALARM

136-7436 WIRING GP-STABILIZER ALARM
S/N 1XR2250-2261
PART OF 139-1921 CONVERSION AR-CERTIFICATION
AN ATTACHMENT

i00644987 SEBP2993

1367436 WIRING GP-STABILIZER ALARM Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	136-6876	[1]	BRACKET
2.	155-6228	[2]	PLATE
3.	142-3340	[1]	SWITCH AS-LIMIT (STABILIZER LEG)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
4.	8T-3998 M	[2]	BOLT (M4X0.7X12-MM)
5.	136-7432	[1]	HARNESS AS-WIRING (STABILIZER)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[13]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
6.	136-7430	[1]	HARNESS AS-PANEL (STABILIZER)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	2L-8076	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	5P-4571	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	136-5185	[1]	ALARM-WARNING
8.	4B-4863	[4]	WASHER (4.7X11X1.2-MM THK)
9.	3S-2093	[20]	STRAP-CABLE
10.	136-7437	[1]	BRACKET AS
11.	5C-8312 M	[2]	NUT (M4X0.7-THD)
12.	4P-8134	[1]	CLIP (LADDER)
13.	9X-2043 M	[2]	SCREW-TRUSS HEAD (M6X1X14-MM)
14.	189-3158	[2]	SUPPRESSOR-ARC
	M		METRIC PART

#SEBP29930244

147-2732: WIRING GP-STABILIZER ALARM

WIRING GP-STABILIZER ALARM

147-2732 WIRING GP-STABILIZER ALARM
S/N 1XR2250-2261
SIDESHIFT
PART OF 147-3102 CONVERSION AR-CERTIFICATION
AN ATTACHMENT

i00672199 SEBP2993

1472732 WIRING GP-STABILIZER ALARM Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	136-6876	[1]	BRACKET
2.	155-6228	[2]	PLATE
3.	142-3340	[1]	SWITCH AS-LIMIT (STABILIZER LEG)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
4.	8T-3998 M	[2]	BOLT (M4X0.7X12-MM)
5.	3E-9362	[1]	RELAY AS (12-VOLT)(ALARM)
6.	147-2741	[1]	HARNESS AS-WIRING (STABILIZER)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	136-5185	[1]	ALARM-WARNING
8.	4B-4863	[4]	WASHER (4.7X11X1.2-MM THK)
9.	3S-2093	[10]	STRAP-CABLE
10.	136-7437	[1]	BRACKET AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
11.	5C-8312 M	[2]	NUT (M4X0.7-THD)
12.	4P-8134	[1]	CLIP (LADDER)
13.	9X-2043 M	[2]	SCREW-TRUSS HEAD (M6X1X14-MM)
14.	147-2740	[1]	HARNESS AS-PANEL (STABILIZER)
	111-6795	[1]	HOUSING-RELAY
	111-6816	[1]	LOCK
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[7]	STRAP-CABLE
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACK PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	5P-1476	[1]	TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)
	2L-8076	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	5P-4571	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
	112-9611	[4]	TERMINAL-BLADE (18-GA TO 20-GA)
	M		METRIC PART

#SEBP29930245

114-0165: AXLE & MTG GP-REAR

AXLE & MTG GP-REAR

114-0165 AXLE & MTG GP-REAR
S/N 1XR2250-2261
PART OF 154-5452, 154-5453, 174-5435, 174-5436 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT

i00784958 SEBP2993

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5F-5434	[1]	VALVE AS-VENT (FINAL DRIVE, AXLE)
2.	156-2857 CY	[1]	AXLE GP-REAR
3.	7X-2570 M	[8]	BOLT (M20X2.5X220-MM)
4.	8T-4131 M	[8]	NUT (M20X2.5-THD)
5.	8T-5439	[16]	WASHER-HARD (21.5X45X6-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP29930246

154-5472: AXLE GP-DRIVE & STEERING

AXLE GP-DRIVE & STEERING

154-5472 AXLE GP-DRIVE & STEERING -FRONT
S/N 1XR2250-2261
PART OF 174-5451 AXLE GP-DRIVE & STEERING
AN ATTACHMENT

i00985303 SEBP2993

1545472 AXLE GP-DRIVE & STEERING Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	174-5698	[1]	HOUSING (RH)
2.	119-7056	[1]	HOUSING (LH)
3.	9R-3175	[1]	PLUG
5.	130-7008 B	[2]	SHIM (0.2-MM THK)
	130-7009 B	[2]	SHIM (0.3-MM THK)
	130-7010 B	[2]	SHIM (0.4-MM THK)
	130-7011 B	[2]	SHIM (0.6-MM THK)
	130-7012 B	[2]	SHIM (0.8-MM THK)
	130-7013 B	[2]	SHIM (1-MM THK)
	130-7015 B	[2]	SHIM (1.6-MM THK)
	130-7017 B	[2]	SHIM (2-MM THK)
6.	9X-0796	[3]	SEAL-O-RING
7.	130-2998	[2]	BUSHING
8.	130-6877	[2]	SEAL
9.	154-5404	[2]	BEARING
10.	9R-3168 M	[4]	SCREW (M10X1.5X20-MM)
11.	119-7061	[2]	PLUG
12.	130-6878	[6]	RING
13.	169-4161	[6]	CONE-BEARING
14.	169-4162	[6]	CONE-BEARING
15.	169-4160	[6]	GEAR
16.	130-7027	[2]	CARRIER
17.	119-7042	[2]	SHAFT
18.	119-7040	[2]	GEAR-RING
19.	130-3007	[2]	NUT
20.	119-7060 M	[2]	SCREW-STOP (M14X1.5X50-MM)
21.	130-7047	[16]	STUD
22.	130-3008 M	[16]	BOLT (M10X1.5X45-MM)
23.	2S-0480	[4]	CUP-TAPERED ROLLER
24.	178-8608	[4]	CONE-TAPERED
25.	130-6879	[2]	SEAL
26.	9X-0640	[2]	SEAL-O-RING
27.	130-3014 Y	[1]	SHAFT GP-DRIVE (LH)
28.	130-3013 Y	[1]	SHAFT GP-DRIVE (RH)
29.	054-6589	[2]	CLIP
30.	119-7045	[2]	SEAL
31.	7X-5771	[2]	RING-RETAINING
32.	131-3816	[2]	RING
33.	119-7053	[2]	FLANGE
34.	5P-9439	[2]	BALL BEARING
35.	130-6677	[16]	BOLT (M12X1.75X30-MM)
36.	130-7026	[2]	PIN
37.	119-7038	[2]	PIN
38.	119-7047	[2]	SEAL
39.	119-7046	[2]	SEAL
40.	031-0426	[2]	CUP-BEARING
41.	077-3918	[2]	BEARING
42.	119-7057	[1]	HOUSING (RH)
43.	130-7031	[1]	HOUSING (LH)
44.	054-6459 B	[1]	SHIM (1-MM THK)
	054-6460 B	[1]	SHIM (1.05-MM THK)
	054-6461 B	[1]	SHIM (1.1-MM THK)
	054-6462 B	[1]	SHIM (1.15-MM THK)
	054-6463 B	[1]	SHIM (1.2-MM THK)
	054-6464 B	[1]	SHIM (1.25-MM THK)
	054-6465 B	[1]	SHIM (1.3-MM THK)
	054-6466 B	[1]	SHIM (1.35-MM THK)
	054-6467 B	[1]	SHIM (1.4-MM THK)
	054-6468 B	[1]	SHIM (1.45-MM THK)
	054-6469 B	[1]	SHIM (1.5-MM THK)
	054-6470 B	[1]	SHIM (1.55-MM THK)
	054-6471 B	[1]	SHIM (1.6-MM THK)
	054-6472 B	[1]	SHIM (0.95-MM THK)
	054-6473 B	[1]	SHIM (0.9-MM THK)
	054-6474 B	[1]	SHIM (0.65-MM THK)
	054-6475 B	[1]	SHIM (0.7-MM THK)
	054-6476 B	[1]	SHIM (0.75-MM THK)
	054-6477 B	[1]	SHIM (0.85-MM THK)
	130-3850 B	[1]	SHIM (0.8-MM THK)
45.	130-6689 B	[1]	RING (15.1-MM THK)
	130-6690 B	[1]	RING (15.2-MM THK)
	130-6691 B	[1]	RING (15.26-MM THK)
	130-6693 B	[1]	RING (15.3-MM THK)
	130-6694 B	[1]	RING (15.33-MM THK)
	130-6695 B	[1]	RING (15.36-MM THK)
	130-6696 B	[1]	RING (15.38-MM THK)
	130-6697 B	[1]	RING (15.4-MM THK)
	130-6698 B	[1]	RING (15.43-MM THK)
	130-6699 B	[1]	RING (15.46-MM THK)
	130-6701 B	[1]	RING (15.48-MM THK)
	130-6702 B	[1]	RING (15.5-MM THK)
	130-6703 B	[1]	RING (15.53-MM THK)
	130-6704 B	[1]	RING (15.56-MM THK)
	130-6705 B	[1]	RING (15.58-MM THK)
	130-6706 B	[1]	RING (15.6-MM THK)
	130-6707 B	[1]	RING (15.63-MM THK)
	130-6708 B	[1]	RING (15.66-MM THK)
	130-6709 B	[1]	RING (15.68-MM THK)
	130-6710 B	[1]	RING (15.7-MM THK)
	130-6711 B	[1]	RING (15.73-MM THK)
46.	130-6712 B	[1]	RING (15.8-MM THK)
	130-6713 B	[1]	RING (15.83-MM THK)
	130-6714 B	[1]	RING (15.86-MM THK)
	130-6715 B	[1]	RING (15.9-MM THK)
	130-6716 B	[1]	RING (15.93-MM THK)
	130-6718 B	[1]	RING (15.96-MM THK)
	130-6719 B	[1]	RING (16-MM THK)
	130-6720 B	[1]	RING (16.03-MM THK)
	130-6721 B	[1]	RING (16.06-MM THK)
	130-6722 B	[1]	RING (16.1-MM THK)
	130-6724 B	[1]	RING (16.13-MM THK)
	130-6725 B	[1]	RING (16.16-MM THK)
	130-6726 B	[1]	RING (16.2-MM THK)
	130-6727 B	[1]	RING (16.23-MM)
	130-6728 B	[1]	RING (16.26-MM THK)
	130-6729 B	[1]	RING (16.3-MM THK)
	130-6731 B	[1]	RING (16.4-MM THK)
	130-6732 B	[1]	RING (16.76-MM THK)
47.	130-6798 B	[2]	SHIM (1-MM THK)
	130-6799 B	[2]	WASHER (1.05-MM THK)
	130-6800 B	[2]	SHIM (1.1-MM THK)
	130-6801 B	[2]	WASHER (62.2X75X1.15-MM THK)
	130-6802 B	[2]	WASHER (62.2X75X1.2-MM THK)
	130-6803 B	[2]	WASHER (62.2X75X1.25-MM THK)
	130-6804 B	[2]	SHIM (1.3-MM THK)
	130-6805 B	[2]	SHIM (1.35-MM THK)
	130-6806 B	[2]	SHIM (1.4-MM THK)
	130-6807 B	[2]	WASHER (1.45-MM THK)
	130-6808 B	[2]	SHIM (1.5-MM THK)
	130-6809 B	[2]	SHIM (1.55-MM THK)
	130-6810 B	[2]	SHIM (1.6-MM THK)
	130-6811 B	[2]	SHIM (1.65-MM THK)
	130-6812 B	[2]	SHIM (1.7-MM THK)
	130-6813 B	[2]	SHIM (1.75-MM THK)
	130-6814 B	[2]	SHIM (1.8-MM THK)
	130-6815 B	[2]	SHIM (1.85-MM THK)
	130-6816 B	[2]	SHIM (1.9-MM THK)
	130-6817 B	[2]	WASHER (62.2X75X1.95-MM THK)
	130-6818 B	[2]	WASHER (62.2X75X2-MM THK)
	130-6819 B	[2]	WASHER (62.2X75X2.05-MM THK)
	130-6820 B	[2]	SHIM (2.1-MM THK)
48.	130-6673	[1]	PLUG
49.	3N-6408	[1]	CUP-BEARING (TAPERED ROLLER)
50.	6V-3303 M	[15]	BOLT (M16X2X60-MM)
51.	178-7190 Y	[1]	CYLINDER GP-STEERING
52.	6V-2200	[2]	CUP-BEARING
53.	003-7501	[2]	CONE-BEARING
54.	130-6675	[1]	PIN
55.	082-3077	[4]	PIN
56.	130-3010	[4]	PIN (13.5MM DIA)
57.	105-3484 M	[12]	BOLT-SOCKET HEAD (M10X1.5X25-MM)
58.	119-7036	[1]	PIN
59.	9R-6994	[2]	WASHER-THRUST
60.	128-7855	[2]	GEAR-PINION
61.	107-5608	[1]	GEAR SET-BEVEL
62.	130-3000 M	[2]	WASHER (53.2X71.9X1.9-MM THK)
63.	130-7048 B	[2]	RING (13.5-MM THK)
	130-7049 B	[2]	RING (13.6-MM THK)
	130-7050 B	[2]	RING (13.7-MM THK)
64.	130-7024	[1]	CASE
65.	130-3005 M	[1]	NUT (M24X2-THD)
66.	054-6480	[1]	DISC
67.	130-7028	[1]	PLATE
68.	130-7046	[1]	FLANGE
69.	055-1986	[1]	SEAL-LIP TYPE
70.	6S-3051	[3]	CUP-BEARING
71.	008-1902	[3]	CONE-BEARING
72.	119-7035	[2]	GEAR
73.	130-3809	[1]	TIE ROD AS (RH)
	130-5010 M	[1]	LOCKNUT (M22X1.5-THD)
	130-6674	[1]	CLAMP
	130-6880	[1]	BALL JOINT
	130-7043	[1]	JOINT
74.	130-3012	[1]	TIE ROD AS (LH)
	130-5010 M	[1]	LOCKNUT (M22X1.5-THD)
	130-6674	[1]	CLAMP
	130-6881	[1]	BALL JOINT
	130-7043	[1]	JOINT
75.	3N-4969	[1]	CONE-BEARING (TAPERED ROLLER)
76.	154-5405	[2]	SEAL-LIP TYPE
77.	054-6847	[1]	SEAL-O-RING
78.	054-6526	[15]	DISC
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP29930247

174-5451: AXLE GP-DRIVE & STEERING

AXLE GP-DRIVE & STEERING

174-5451 AXLE GP-DRIVE & STEERING
S/N 1XR2250-2261
PART OF 174-5435, 174-5436 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT

i01215599 SEBP2993

1745451 AXLE GP-DRIVE & STEERING Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1K-7082	[1]	WASHER (2.266X4X0.031-IN THK)
2.	9R-9702	[2]	WASHER (56X100X1.6-MM THK)
3.	112-9629	[1]	PIN
4.	154-5472 Y	[1]	AXLE GP-DRIVE & STEERING (FRONT)
5.	165-8996	[2]	WASHER-THRUST (55.5X100.5X5-MM THK)
6.	8T-5041 M	[1]	BOLT (M12X1.75X120-MM)
7.	8T-8549 M	[1]	LOCKNUT (M12X1.75-THD)
8.	173-5479	[1]	SWITCH AS-ROCKER (ALL WHEEL DRIVE, BRAKE)
	111-7899	[1]	GASKET
9.	113-8491	[1]	FUSE (15-AMPERE)
10.	3E-9362	[1]	RELAY AS (12-VOLT)
11.	106-8704	[2]	SUPPRESSOR AS-ARC
			(EACH INCLUDES)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP29930248

156-2857: AXLE GP-REAR

AXLE GP-REAR

156-2857 AXLE GP-REAR
S/N 1XR2250-2261
RATIO 18.5
PART OF 114-0165 AXLE & MTG GP-REAR
AN ATTACHMENT

i00783340 SEBP2993

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	118-5837	[2]	SHAFT AS
			(EACH INCLUDES)
1A.	9R-5219	[8]	BOLT-SPECIAL
2.	9R-2407	[1]	RETAINER AS
2A.	3N-6408	[1]	CUP-BEARING (TAPERED ROLLER)
2B.	4K-5843	[1]	CUP-BEARING (TAPERED ROLLER)
3.	156-1928	[1]	HOUSING AS (LH)
3A.	6Y-7652	[1]	CUP-BEARING (TAPERED ROLLER)
3B.	8S-9151	[1]	CUP-BEARING
3C.		[2]	STUD
3D.	156-1930	[1]	GEAR-RING (56-TEETH)
4.		[1]	HOUSING AS
4A.	6Y-7652	[1]	CUP-BEARING (TAPERED ROLLER)
4B.	8S-9151	[1]	CUP-BEARING
4C.		[2]	STUD
4D.	156-1930	[1]	GEAR-RING (56-TEETH)
5.	186-4117	[2]	CARRIER AS
			(EACH INCLUDES)
5A.	7T-6652	[1]	CONE-BEARING (TAPERED ROLLER)
5B.	9R-2417	[3]	WASHER (33.07X48.38X1.06-MM THK)
5C.	9R-2418	[6]	WASHER (32.94X57.21X0.78-MM THK)
5D.	9R-2419	[3]	KIT-BEARING
5E.	9R-2420	[1]	RETAINER
5F.	9R-2421	[3]	SHAFT
5G.	186-4118	[3]	GEAR-PLANETARY (20-TEETH)
6.	9F-2167	[2]	SCREW-PURGE (3/8-24X1.164-IN)
7.	9R-0883	[1]	PIN
8.	9R-0823	[1]	LEVER AS
9.	9R-2427 B	[1]	SHIM (0.965-MM THK)
	9R-2428 B	[1]	SHIM (1.118-MM THK)
	9R-2429 B	[1]	SHIM (1.27-MM THK)
	9R-2430 B	[1]	SHIM (1.422-MM THK)
	9R-2431 B	[1]	SHIM (1.575-MM THK)
	9R-2432 B	[1]	SHIM (1.727-MM THK)
	9R-2433 B	[1]	SHIM (1.88-MM THK)
	9R-2434 B	[1]	SHIM (2.032-MM THK)
10.	9R-2425	[2]	WASHER (23.088X69.6X9.52-MM THK)
11.	156-2572	[1]	HOUSING-REAR BRAKE (RH)
12.	9R-9410	[2]	SEAL-REAR BRAKE
13.	9R-9409	[2]	SEAL-REAR BRAKE
14.	9R-9408	[2]	PISTON-REAR BRAKE
15.	9R-2446 B	[1]	SPACER (45.86X50.98X31.858-MM THK)
	9R-2447 B	[1]	SPACER (45.86X50.98X31.908-MM THK)
	9R-2448 B	[1]	SPACER (45.86X50.98X31.959-MM THK)
	9R-2449 B	[1]	SPACER (45.86X50.98X32.01-MM THK)
	9R-2450 B	[1]	SPACER (45.86X50.98X32.061-MM THK)
	9R-2451 B	[1]	SPACER (45.86X50.98X32.112-MM THK)
	9R-2452 B	[1]	SPACER (45.86X50.98X32.162-MM THK)
	9R-2453 B	[1]	SPACER (45.86X50.98X32.213-MM THK)
	9R-2454 B	[1]	SPACER (45.86X50.98X32.264-MM THK)
	9R-2455 B	[1]	SPACER (45.86X50.98X32.315-MM THK)
	9R-2456 B	[1]	SPACER (45.86X50.98X32.366-MM THK)
	9R-2457 B	[1]	SPACER (45.86X50.98X32.416-MM THK)
	9R-2458 B	[1]	SPACER (45.86X50.98X32.467-MM THK)
	9R-2459 B	[1]	SPACER (45.86X50.98X32.518-MM THK)
	9R-2460 B	[1]	SPACER (45.86X50.98X32.569-MM THK)
16.	230-4017	[8]	DISC-BRAKE
17.	9R-2474	[2]	PIN
18.	9R-9401	[8]	PLATE
19.	8S-4740	[12]	BOLT (9/16-12X5-IN)
20.	9R-9398	[2]	MANIFOLD-BRAKE TUBE
21.	8H-1607	[2]	SEAL-O-RING
22.	9R-2424	[2]	GEAR (16-TEETH)
23.	8M-8157	[4]	SEAL-O-RING
24.	2A-4576	[1]	CUP-BEARING (TAPERED ROLLER)
25.	5L-9656	[1]	CONE-BEARING (TAPERED ROLLER)
26.	9X-8880	[25]	BOLT (5/8-11X2-IN)
27.	9R-2508	[1]	HOUSING
28.	113-1147	[1]	FLANGE
29.	9R-2497	[1]	SEAL
30.	9R-2501	[1]	WASHER (32.5X60.5X5.6-MM THK)
31.	9R-2502	[1]	NUT (1-1/4-18-THD)
32.	3B-5302	[1]	PIN-COTTER
33.	9R-2498	[1]	RETAINER
34.	3B-4509	[6]	LOCKWASHER
35.	3K-3379	[6]	BOLT (9/16-12X1-IN)
36.	9X-8883	[1]	BOLT (5/8-11X2.75-IN)
37.	5L-9018	[4]	BOLT-SOCKET HEAD (1/4-20X1.75-IN)
38.	8T-6760	[2]	PLUG-PIPE (1-1/2-11-1/2 NPT)
39.	9R-2499	[1]	SEAL AS
40.	9R-2496	[1]	SEAL
41.	7T-6653	[1]	CONE-BEARING (TAPERED ROLLER)
42.	118-5839	[2]	SEAL-REAR AXLE
43.	9R-2512	[1]	SEAL
44.	030-1957	[2]	CONE-BEARING (TAPERED ROLLER)
45.	7T-6654	[1]	CONE-BEARING (TAPERED ROLLER)
46.	9R-2505	[1]	SEAL
47.	9R-2504	[1]	SHAFT
48.	9R-2507 M	[1]	SCREW-SPECIAL
49.	7T-7621	[1]	BEARING AS
50.	9R-2494	[1]	RING
51.	9R-2480	[1]	CASE AS
52.	2S-0480	[1]	CUP-TAPERED ROLLER
53.	2S-0479	[1]	CONE-BEARING (TAPERED ROLLER)
54.	9R-2506	[1]	FORK
55.	9R-2492	[1]	WASHER (64.389X78.74X3.124-MM THK)
56.	9R-2493	[1]	RING
57.	9R-2488	[1]	GEAR (16-TEETH)
58.	9R-2482	[1]	COUPLING
59.	282-9821	[1]	HOUSING-BRAKE (LH)
60.	9R-2486	[1]	SPRING
61.	9R-2483	[1]	ADAPTER
62.	9R-2484	[2]	BUSHING-TERMINAL
63.	9R-2490	[2]	WASHER (76.2X101.6X1.524-MM THK)
64.	9R-2491	[1]	SPIDER
65.	9R-9403	[4]	PINION
66.	9R-2489	[4]	WASHER-SPRING
67.	9R-2485	[8]	BOLT (1/2-13X2.87-IN)
68.	9R-2495	[2]	SEAL
69.	118-9117	[1]	GEAR SET
70.	9R-6671 M	[12]	BOLT (1/2-20X1.62-IN)
71.	2M-2570	[12]	LOCKNUT (1/2-20-THD)
72.	9R-2503	[1]	BLOCK
73.	2L-6267	[1]	LOCKNUT (3/8-24-THD)
74.	0T-0318	[2]	BOLT (7/16-14X1-IN)
75.	9R-2487	[1]	GEAR (16-TEETH)
76.	9R-2435 B	[2]	SPACER (22.86X53.85X1.25-MM THK)
	9R-2436 B	[2]	SPACER (22.86X53.85X1.35-MM THK)
	9R-2437 B	[2]	SPACER (22.86X53.85X1.45-MM THK)
	9R-2438 B	[2]	SPACER (22.86X53.85X1.55-MM THK)
	9R-2439 B	[2]	SPACER (22.86X53.85X1.65-MM THK)
	9R-2440 B	[2]	SPACER (22.86X53.85X1.75-MM THK)
	9R-2441 B	[2]	SPACER (22.86X53.85X1.85-MM THK)
	9R-2442 B	[2]	SPACER (22.86X53.85X1.96-MM THK)
	9R-2443 B	[2]	SPACER (22.86X53.85X2.06-MM THK)
	9R-2444 B	[2]	SPACER (22.86X53.85X2.16-MM THK)
	9R-2445 B	[2]	SPACER (22.86X53.85X2.26-MM THK)
77.	9R-6602	[2]	PLUG-MAGNETIC
78.	5P-0540	[4]	NUT-HEX FULL (9/16-18-THD)
79.	282-9822	[1]	HOUSING-BRAKE (RH)
80.	156-1933	[1]	HOUSING-REAR BRAKE (LH)
81.	9R-2426	[2]	LOCK
82.	9R-2466 M	[2]	BOLT (7/8-14X2.2-IN)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP29930249

150-1281: CHART-WHEEL & TIRE

CHART-WHEEL & TIRE

150-1281 CHART-WHEEL & TIRE
S/N 1XR2250-2261
AN ATTACHMENT

i00810171 SEBP2993

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
			(FOR USAGE REFER TO CHART)
1.	9R-0315	[1]	WHEEL AS (FRONT)
2.	9R-1572	[1]	WHEEL AS
3.	9R-2937	[1]	WHEEL AS
4.	135-0770	[1]	WHEEL AS (FRONT)
5.	135-0786	[1]	WHEEL AS (FRONT)
6.	141-7221		NUT-HEX FLANGE (3/4-16-THD)
7.	6D-0337	[1]	VALVE GP-TIRE
	6D-0443	[1]	HOUSING AS-CORE
	2D-2628	[1]	CORE-VALVE
	2D-2633	[1]	CAP
	8D-2707	[2]	SPUD AS
	2D-2629	[1]	GROMMET
	2D-2630	[1]	WASHER
	2D-2631	[1]	NUT (0.482-26-THD)
			CONTACT LOCAL CATERPILLAR DEALERSHIP FOR TIRE REPLACEMENT

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery - Recycle
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Alert Indicators
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Quick Coupler Control (Loader) - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Battery Electrolyte Level - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Auxiliary Circuit Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Battery or Battery Cable - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Fuses - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Hydraulic Lock Control - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Alert Indicators
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Loader Quick Coupler Control - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Battery or Battery Cable - Inspect/Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

<B>Installing a Replacement Platform Harness As on Certain Backhoe Loaders</B> {1408}
Installing a Replacement Platform Harness As on Certain Backhoe Loaders {1408}

Service Letter-NACD

The Electrical Grounding Needs To Be Improved To Prevent Unintentional Starter Engagement On Certain 416C, 426C And 436C Backhoe Loaders
The Electrical Grounding Needs To Be Improved To Prevent Unintentional Starter Engagement On Certain 416C, 426C And 436C Backhoe Loaders

Product Support Program For Improving The Quick Coupler Harness On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
Product Support Program For Improving The Quick Coupler Harness On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Shortened Service Life Of The Air Ride Seat Relay
Shortened Service Life Of The Air Ride Seat Relay

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Service Letter-Asia

Systems Operation

General Information
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Transmission Electronic Control Module (ECM)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Switches
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Sensors
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Diagnostic Operation
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Relays
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Testing and Adjusting

General Information
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Electrical Components And Connector Locations
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Initial Troubleshooting Procedure
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Using the Diagnostic Indicator to Determine Diagnostic Codes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Using Electronic Control Analyzer Programmer (ECAP) to Determine Diagnostic Codes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Using Caterpillar Electronic Technician (ET) to Determine Diagnostic Codes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Power Supply for Electronic Control Module (Transmission) - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Diagnostic Indicator - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Fifth Gear Lockout Switch - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Switch (Neutralizer) - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Neutral Lock Switch - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Switch (Parking Brake) - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Electronic Control Module (ECM) - Configure
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Electronic Control Module (ECM) - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

System Schematic
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Glossary of Terms
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

CID 0520 FMI 02 Transmission Configuration Incorrect - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

CID 0650 FMI 02 Harness Code Incorrect - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

CID 0683 FMI 03 Relay (Parking Brake) Voltage Above Normal - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

CID 0683 FMI 05 Relay (Parking Brake) Current Below Normal - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

CID 0683 FMI 06 Relay (Parking Brake) Current Above Normal - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Troubleshooting Diagnostic Codes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

System Schematic
Machine Security System

Electric Starting System - Test
3054 Engine

Electrical Connector - Inspect
Machine Security System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
MSS3s Machine Security System

Troubleshooting

Electrical Component and Connector Locations
Machine Security System

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Cat Data Link - Test
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System

Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System

Connector Locations
MSS3s Machine Security System

Connector Contact Description
MSS3s Machine Security System

Electrical Connector - Inspect
MSS3s Machine Security System

Service Magazine

Parts Manuals May List Air Conditioning Compressors Incorrectly {1802,1809,7320}
1996/10/07

Improved All Wheel Drive (AWD) Switch Assembly Used In Production{1429}
1998/03/16

Correction To SENR1275 And SENR1276 Electrical Schematics {7490}
1998/06/29

Improved Cab Harness Accommodates Additional Relay {1408}
1999/05/03

New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29

A New Relay for the Air Conditioner Improves Machine Performance {1408, 7320}
2000/05/01

Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10

A New Receptacle Provides a Reliable Connection {1408, 1431, 5258, 7301}
2000/07/10

A New Harness Is Available for Brooms {1408}
2000/06/05

Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/10/23

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09

Improved Service Meter Used {7478}
2004/05/03

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 416C :

166-9300 WIRING GP-RIDE CONTROL

163-9228 WIRING GP-RIDE CONTROL

163-9227 WIRING GP-RIDE CONTROL

185-5788 WIRING GP-QUICK COUPLER

139-5128 WIRING GP-QUICK COUPLER

163-9198 WIRING GP-POWER SHIFT

104-9510 WIRING GP-POWER RECEPTACLE

104-5969 WIRING GP-POWER RECEPTACLE

175-6771 WIRING GP-RIDE CONTROL

175-6775 WIRING GP-RIDE CONTROL

136-7436 WIRING GP-STABILIZER ALARM

147-2732 WIRING GP-STABILIZER ALARM

114-0165 AXLE & MTG GP-REAR

154-5472 AXLE GP-DRIVE & STEERING

174-5451 AXLE GP-DRIVE & STEERING

156-2857 AXLE GP-REAR

Truck sale:

Caterpillar 416C
- backhoe loader
FOLEY, INC.

4,063

Caterpillar 416C, bucket, Construction
- bucket
FINNING CANADA

37,100

Caterpillar 416C, backhoe loader, Construction

26,000

Caterpillar 416C, backhoe loader, Construction

34,000

Caterpillar 416C, backhoe loader, Construction