AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

169-9529 CYLINDER GP-SWING S/N 2CR19310-UP 101.6-MM (4-IN) BORE X 249-MM (9.8-IN) STROKE PART OF 154-5442 HYDRAULIC AR 428C


HYDRAULIC SYSTEM
CYLINDER GP
FUEL SYSTEM
DRAIN GP-FUEL
HYDRAULIC SYSTEM
DRIVE GP
FILTER GP
FITTING GP
HYDRAULIC GP

BACKHOE LOADER 428C BACKHOE LOADER 2CR
 428C Backhoe Loader Side Shift, Parallel Lift 2CR19310-UP (MACHINE) POWERED BY 3054 Engine SEBP2999 428C 2CR   (1995)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-STICK
173-4015 CYLINDER GP-STICK
CYLINDER GP-STICK
213-0232 CYLINDER GP-STICK
CYLINDER GP-SWING
169-9529 CYLINDER GP-SWING
CYLINDER GP-SWING
169-9530 CYLINDER GP-SWING
CYLINDER GP-TILT
183-5158 CYLINDER GP-TILT
LINES GP-COUPLER
148-2301 LINES GP-COUPLER
 

#SEBP29990430
 

169-9529: CYLINDER GP-SWING

169-9529 CYLINDER GP-SWING
S/N 2CR19310-UP
101.6-MM (4-IN) BORE X 249-MM (9.8-IN) STROKE
PART OF 154-5442 HYDRAULIC AR
i01077492 SEBP2999
1699529 CYLINDER GP-SWING Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-6857 [1] CYLINDER AS  
  9T-2883 [2] BEARING  
2. 169-6947 [1] NUT (1-1/2-12-THD)  
3. 6J-2797 [1] RING-WEAR  
4. 8C-9160 [1] SEAL AS  
5. 112-1773 [1] PISTON  
6. 175-7900 [1] SEAL-O-RING  
7. 168-2271 [1] RING-BACKUP  
8. 6E-5649 [1] WASHER (1.25-MM THK)  
9. 6E-5651 [1] HEAD  
10. 4T-5613 [1] RING-WEAR  
11. 229-9382 [1] SEAL-WIPER  
12. 167-2304 [1] SEAL-U-CUP  
13. 167-2195 [1] SEAL AS-BUFFER  
14. 125-7894 [1] ROD AS  
15. 102-3582 [1] WASHER (11X19.5X2.5-MM THK)  
16. 2Y-5821 [1] RING  
17. 3N-5739 [1] SPRING  
18. 6E-1478 [1] PLUNGER  
19. 9R-9505 [2] BUSHING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP29990431
 

169-9530: CYLINDER GP-SWING

169-9530 CYLINDER GP-SWING
S/N 2CR19310-UP
101.6MM(4 IN) BORE X 249MM(10 IN) STROKE
PART OF 154-5442 HYDRAULIC AR
i01077489 SEBP2999
1699530 CYLINDER GP-SWING Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-6859 [1] CYLINDER AS (RH)  
  9T-2883 [2] BEARING  
2. 169-6947 [1] NUT (1-1/2-12-THD)  
3. 6J-2797 [1] RING-WEAR  
4. 8C-9160 [1] SEAL AS  
5. 112-1773 [1] PISTON  
6. 175-7900 [1] SEAL-O-RING  
7. 168-2271 [1] RING-BACKUP  
8. 6E-5649 [1] WASHER (1.25-MM THK)  
9. 6E-5651 [1] HEAD  
10. 4T-5613 [1] RING-WEAR  
11. 167-2457 [1] SEAL-WIPER  
12. 167-2304 [1] SEAL-U-CUP  
13. 167-2195 [1] SEAL AS-BUFFER  
14. 125-7894 [1] ROD AS  
15. 102-3582 [1] WASHER (11X19.5X2.5-MM THK)  
16. 2Y-5821 [1] RING  
17. 3N-5739 [1] SPRING  
18. 6E-1478 [1] PLUNGER  
19. 9R-9505 [2] BUSHING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP29990432
 

183-5158: CYLINDER GP-TILT

183-5158 CYLINDER GP-TILT
S/N 2CR19310-UP
76MM (2.99IN) BORE X 884MM (34.80IN) STROKE
PART OF 154-5442 HYDRAULIC AR
i01228312 SEBP2999
1835158 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-5159 [1] CYLINDER AS  
1A. 9R-0153 [2] BUSHING  
2. 173-9779 M [1] BOLT (M24X3X80-MM)  
3. 6V-8237 [1] WASHER (26X44X4-MM THK)  
4. 9T-2547 [1] PISTON  
5. 6J-1972 J [1] SEAL AS  
6. 6J-5733 J [1] RING-WEAR  
7. 175-7896 J [1] SEAL-O-RING  
8. 6J-5731 J [1] RING-BACKUP  
9. 148-2593 [1] HEAD  
10. 114-2229 [1] ROD AS  
10A. 9R-0321 [2] BUSHING  
11. 308-1845 J [1] SEAL-WIPER  
12. 289-2946 J [1] SEAL-U-CUP  
13. 289-2935 J [1] SEAL AS-BUFFER  
14. 4T-5613 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  238-4462 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP29990433
 

120-9641: DRAIN GP-ECOLOGY

120-9641 DRAIN GP-ECOLOGY
S/N 2CR19310-UP
AN ATTACHMENT
i00478107 SEBP2999
1209641 DRAIN GP-ECOLOGY Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-9780 [1] SEAL-O-RING  
2. 133-6337 [1] PLUG-DRAIN  
3. 134-8474 [1] TUBE AS-DRAIN  
 

#SEBP29990434
 

112-1826: DRIVE & MTG GP-PUMP

112-1826 DRIVE & MTG GP-PUMP
S/N 2CR19310-UP
PART OF 154-5442 HYDRAULIC AR
i00487466 SEBP2999
1121826 DRIVE & MTG GP-PUMP Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9405 M [4] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
2. 9U-8886 [1] RING-SEAL  
3. 115-1918 [1] PLATE  
4. 117-3534 [1] ADAPTER  
5. 274-4555 [1] HUB  
6. 128-5596 Y [1] SHAFT GP-PUMP DRIVE  
7. 175-7904 [1] SEAL-O-RING  
8. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
9. 8T-7338 M [2] BOLT (M16X2X45-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29990435
 

178-0094: FILTER GP-OIL

178-0094 FILTER GP-OIL -HYDRAULIC
S/N 2CR19310-UP
PART OF 154-5442 HYDRAULIC AR
i01361850 SEBP2999
1780094 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 126-1817 [1] FILTER-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC)  
2. 164-6709 [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  5F-9144 [1] SEAL-O-RING  
 

#SEBP29990436
 

132-8769: FITTING GP-HYDRAULIC

132-8769 FITTING GP-HYDRAULIC -QUICK DISCONNECT
S/N 2CR19310-UP
FOR USE WITH HYDRAULIC ATTACHMENTS
AN ATTACHMENT
i00498765 SEBP2999
1328769 FITTING GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-0406 [1] FITTING (QUICK DISCONNECT, MALE)  
2. 106-0401 [1] FITTING (QUICK DISCONNECT, FEMALE)  
 

#SEBP29990437
 

112-1848: HYDRAULIC AR

112-1848 HYDRAULIC AR
S/N 2CR19310-UP
PARALLEL LIFT, THREE BANK
AN ATTACHMENT
i00487551 SEBP2999
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  117-5671 [1] BOOT  
  134-4407 Y [1] CONTROL GP-HYDRAULIC HAND  
  112-1849 Y [1] CONVERSION GP-CONTROL VALVE  
  112-6403 Y [1] LINES GP-LOADER AUXILIARY  
  Y   SEPARATE ILLUSTRATION
 

#SEBP29990438
 

119-3641: HYDRAULIC AR

119-3641 HYDRAULIC AR
S/N 2CR19310-UP
AN ATTACHMENT
i00519953 SEBP2999
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  112-1838 Y [1] CONTROL GP-HYDRAULIC PEDAL  
  119-3360 Y [1] LINES GP-BACKHOE AUXILIARY  
  112-1841 Y [1] VALVE GP-BANK 1  
   
  [2] PLUG AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  9S-4183 [1] PLUG (1-1/16-12-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP29990439
 

154-5442: HYDRAULIC AR

154-5442 HYDRAULIC AR
S/N 2CR19310-UP
PART OF 154-5291 COMMON AR
i01228287 SEBP2999
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  152-9148 Y [1] CYLINDER GP-BOOM  
  123-5087 Y [2] CYLINDER GP-LIFT  
  183-5158 Y [2] CYLINDER GP-TILT  
  173-4565 Y [2] CYLINDER GP-STABILIZER  
  173-4015 Y [1] CYLINDER GP-STICK  
  169-9530 Y [1] CYLINDER GP-SWING  
    S/N 2CR19310-UP
  169-9529 Y [1] CYLINDER GP-SWING  
    S/N 2CR19310-UP
  185-3160 Y [1] LINES GP-LIFT CYLINDER  
  106-0517 Y [1] LINES GP-STABILIZER  
  106-0516 Y [1] LINES GP-SWING  
  122-9137 Y [1] MOUNTING GP-BANK VALVE (BACKHOE)  
  112-1826 Y [1] DRIVE & MTG GP-PUMP  
  161-6634 Y [1] PUMP GP-PISTON  
  106-6252 Y [1] TANK & MTG GP-HYDRAULIC  
  178-0094 Y [1] FILTER GP-OIL (HYDRAULIC)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Swing Frame and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}
Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
Service Letter-CFEL
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
Service Letter-CSARL
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
Technical Information Bulletin
New Stabilizer Foot
New Stabilizer Foot
Tilt Cylinders May Form A Void During Some Applications
Tilt Cylinders May Form A Void During Some Applications
THE HEAD OF THE STICK CYLINDER MAY LOOSEN
THE HEAD OF THE STICK CYLINDER MAY LOOSEN
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Boom Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bucket Cylinder (Backhoe)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bucket Cylinder (Extendable Stick)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stick Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Swing Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Pin Coupler Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Multipurpose Bucket Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Lift Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Tilt Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
Service Letter-Asia
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
Service Letter-APD
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Tilt Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Bucket Tilt Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Loader Lift Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Multi-purpose Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Swing Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stabilizer Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Boom Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Sideshift Assembly
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stabilizer Cylinders (428B)
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stick, Extendible Stick, Extendible Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Extendible Stick Cylinder &amp; Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Service Magazine
Smaller Diameter O-Ring Seal Used On Head For Threaded Gland Cylinder Groups {4303,5101,5102,5104,5452,7562}
1996/08/12
Torque Increased For Piston Retaining Nut In Swing Cylinder Groups{5105,7562}
1997/08/25
Improvements To The Tubes (Lift Cylinder) Provides More Clearance For The Front Tires {5057}
1998/01/26
Improvements Made To Eliminate Noise And Seal Wear On Lines Groups{5057,5102}
1998/03/09
Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08
Splined Pins For Backhoe Loaders {6506,6502}
1999/06/28
Special Instruction For Rebuilding The Backhoe Loader Pin Bores Is Now Available {6101,6104,6119,6501,6502,6503,6506,6508,6515,6518,6533,7054,7222}
1999/09/20
New Lock Valves for the Stabilizers Keep the Cylinder Head Tight {5057, 5067, 5468}
2000/06/05
A New Check Valve Reduces Voiding {5067, 5104}
2000/08/28
The Check Valve Has Been Relocated {5057, 5067, 5104}
2001/04/16
Correction to Disassembly and Assembly, SENR1209 for the Boom and Stick Cylinder {5456, 5458}
2001/05/07
Correction to Specifications Manual SENR1207-03 {5104}
2001/05/14
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30
Correction to Testing and Adjusting, SENR1272 for the Loader Cycle Times {5457}
2001/07/02
Correction to Specifications, SENR1207 , "Stick Cylinder" {5458}
2001/10/01
Correction to Specifications, SENR1207 , "Stabilizer Cylinder" {5468}
2001/10/01
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Correction to Service Manual, SENR1272 , "Operational Checks" {5102, 5104, 5105, 5456, 5457, 5486}
2001/11/05
Correction to Specifications , "Tilt Cylinder" {5104}
2002/04/08
New Hydraulic Tubes Are Used in the Quick Coupler Lines Gp {5057, 5133, 6129}
2003/05/12
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
New Swing Cylinders Improve Service Life {5105}
2004/11/08
Grease the Swing Frame and Maintain the Gap Between the Spacers and the Swing Frame {5105, 6506}
2005/04/25
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24

Caterpillar Parts SIS Catalog 428C :

CYLINDER GP-STICK
213-0232 CYLINDER GP-STICK
CYLINDER GP-STICK
173-4015 CYLINDER GP-STICK
CYLINDER GP-STABILIZER
173-4565 CYLINDER GP-STABILIZER
CYLINDER GP-MULTIPURPOSE BUKT
9T-4006 CYLINDER GP-MULTIPURPOSE BUKT
CYLINDER GP-MULTIPURPOSE BUKT
185-1839 CYLINDER GP-MULTIPURPOSE BUKT
CYLINDER GP-LIFT
123-5089 CYLINDER GP-LIFT
123-5087 CYLINDER GP-LIFT
CYLINDER GP-LIFT
111-0888 CYLINDER GP-LIFT
CYLINDER GP-SWING
169-9530 CYLINDER GP-SWING
CYLINDER GP-TILT
183-5158 CYLINDER GP-TILT
DRAIN GP-ECOLOGY
120-9641 DRAIN GP-ECOLOGY
DRIVE & MTG GP-PUMP
112-1826 DRIVE & MTG GP-PUMP
FILTER GP-OIL
178-0094 FILTER GP-OIL
FITTING GP-HYDRAULIC
132-8769 FITTING GP-HYDRAULIC
112-1848 HYDRAULIC AR
119-3641 HYDRAULIC AR

Truck sale:

Caterpillar 428C, Construction
53,468 
Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar 428C, Construction
53,468 
Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
 
$25,882 USD 
CATERPILLAR 428C 2000
- BACKHOE LOADERS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
CATERPILLAR 428C 2000
 
CATERPILLAR 428C 2000
- BACKHOE LOADERS
CAVILL POWER PRODUCTS PTY. LTD.
315 Main North Road ENFIELD - ADELAIDE -
CATERPILLAR 428C 1998
 
CATERPILLAR 428C 1998
- BACKHOE LOADERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.