AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1U-3209 TIP-PENETRATION S/N 2CR19310-UP FIELD INSTALLATION 428C BACKHOE LOADER


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
OPERATOR STATION
AIR CONDITIONER GP
CAB GP

BACKHOE LOADER 428C BACKHOE LOADER 2CR
 428C Backhoe Loader Side Shift, Parallel Lift 2CR19310-UP (MACHINE) POWERED BY 3054 Engine SEBP2999 428C 2CR   (1995)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
132-1009 ADAPTER GP-TIP
EDGE GP-CUTTING
9R-5320 EDGE GP-CUTTING
EDGE GP-CUTTING
9R-5321 EDGE GP-CUTTING
GUARD GP-BUCKET
101-4408 GUARD GP-BUCKET
GUARD GP-BUCKET
101-4409 GUARD GP-BUCKET
4T-2203 TIP-ABRASION
1U-3209 TIP-PENETRATION
9W-8208 TIP-PENETRATION
9W-8209 TIP-PENETRATION
TOOTH GP-UNI
9R-5866 TOOTH GP-UNI
 

#SEBP29990860
 

1U-3209: TIP-PENETRATION

1U-3209 TIP-PENETRATION
S/N 2CR19310-UP
FIELD INSTALLATION
i00523770 SEBP2999
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  [1] TIP-PENETRATION  
    -OR-
  [1] TIP-PENETRATION  
 

#SEBP29990861
 

9W-8208: TIP-PENETRATION

9W-8208 TIP-PENETRATION
S/N 2CR19310-UP
SHARP CORNER
FIELD INSTALLATION
i00524107 SEBP2999
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9W-8457 [1] TIP-PENETRATION  
    -OR-
  9W-8458 [1] TIP-PENETRATION  
 

#SEBP29990862
 

9W-8209: TIP-PENETRATION

9W-8209 TIP-PENETRATION
S/N 2CR19310-UP
SHARP CENTER
FIELD INSTALLATION
i00524108 SEBP2999
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9W-8460 [1] TIP-PENETRATION  
    -OR-
  9W-8461 [1] TIP-PENETRATION  
 

#SEBP29990863
 

9R-5866: TOOTH GP-UNI

9R-5866 TOOTH GP-UNI
S/N 2CR19310-UP
PART OF 190-1068, 190-1069, 190-1075 BUCKET AR-MULTIPURPOSE, 190-1064, 190-1072 BUCKET GP-GENERAL PURPOSE
FOR USE WITH LOADER BUCKETS
CANNOT BE USED WITH @@@@@ 9R-5321@@@@@, @@@@@ 9R-5320@@@@@
AN ATTACHMENT
i00445184 SEBP2999
9R5866 TOOTH GP-UNI Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8203 [8] TOOTH  
2. 4F-3657 [16] BOLT-PLOW (5/8-11X2.75-IN)  
3. 4K-0367 [16] NUT-FULL (5/8-11-THD)  
 

#SEBP29990864
 

144-2221: AIR CONDITIONER AR

144-2221 AIR CONDITIONER AR
S/N 2CR19310-UP
EMISSIONS ENGINE
AN ATTACHMENT
i00661114 SEBP2999
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  104-9478 Y [1] AIR CONDITIONER GP  
  137-7140 Y [1] COMPRESSOR & MTG GP-REFRIG  
  144-2222 Y [1] CONDENSER & MTG GP-REFRIGERANT  
  145-7179 Y [1] LINES GP-AIR CONDITIONER  
  121-9752 Y [1] MOUNTING GP-RADIO  
  104-9499 Y [1] WIRING GP-AIR CONDITIONER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP29990865
 

145-7168: AIR CONDITIONER AR

145-7168 AIR CONDITIONER AR
S/N 2CR19310-UP
NON-EMISSIONS
AN ATTACHMENT
i00672253 SEBP2999
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  104-9478 Y [1] AIR CONDITIONER GP  
  7E-4641 Y [1] COMPRESSOR & MTG GP-REFRIG  
  144-2222 Y [1] CONDENSER & MTG GP-REFRIGERANT  
  145-7179 Y [1] LINES GP-AIR CONDITIONER  
  121-9752 Y [1] MOUNTING GP-RADIO  
  104-9499 Y [1] WIRING GP-AIR CONDITIONER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP29990866
 

104-9478: AIR CONDITIONER GP

104-9478 AIR CONDITIONER GP
S/N 2CR19310-UP
PART OF 144-2221, 145-7168 AIR CONDITIONER AR
AN ATTACHMENT
i00720741 SEBP2999
1049478 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-0099 [2] KNOB-CONTROL  
2. 3S-2093 [2] STRAP-CABLE  
3. 7K-3262 [2] SCREW (THUMB)  
4. 7T-9793 [2] VALVE-CHECK  
5. 8Y-6388 [6] LOUVER AS-VENT  
6. 9R-9901 [2] FASTENER (CLIP)  
7. 084-4277 [1] LAMP GP-DOME (12-VOLT)  
  6R-7490 [1] LAMP (12-VOLT, 10-WATT)  
8. 104-2091 [12] SCREW-FLAT HEAD (6-20X0.5-IN)  
9. 104-9481 [1] FILTER ELEMENT-ENCLOSURE AIR  
10. 104-9485 [1] BRACKET AS  
11. 104-9486 [1] COVER-POST  
12. 123-0253 [1] BRACKET AS  
13. 124-0256 [1] PLATE  
14. 131-5492 [2] RETAINER-CAPTIVE  
15. 131-8158 [2] PLATE  
16. 133-7655 [1] FILM-CONTROL  
17. 134-1224 [2] GRILL  
18. 134-2558 [1] COVER  
19. 142-9660 Y [1] AIR CONDITIONER GP  
20. 144-9973 [6] CLAMP  
21. 146-6919 [1] LINER-CAB  
22. 149-1507 [1] LINER AS-CAB  
  131-9253 [1] DUCT  
  131-9254 [1] DUCT  
  133-4964 [8] NUT-JACK  
23. 151-1264 [2] ELBOW  
24. 158-5064 [1] DUCT  
25. 158-5065 [1] DUCT  
26. 5P-4115 [3] WASHER-HARD (7.2X19X2-MM THK)  
27. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
28. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4137 M [9] BOLT (M10X1.5X20-MM)  
30. 8T-4138 M [3] BOLT (M6X1X20-MM)  
31. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
32. 8Y-7446 [4] SCREW-PAN HEAD  
33. 5P-6129 D TUBE (6-M)  
34. 129-1854 E FASTENER-LOOP  
35. 129-1855 E FASTENER-HOOK  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP29990867
 

142-9660: AIR CONDITIONER GP

142-9660 AIR CONDITIONER GP
S/N 2CR19310-UP
PART OF 104-9478 AIR CONDITIONER GP, 148-9152 KIT-AIR CONDITIONER
AN ATTACHMENT AND FIELD INSTALLATION
i00720861 SEBP2999
1429660 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-8715 [1] GROMMET  
2. 2P-4339 [4] NUT-JAM (7/16-28-THD)  
3. 2S-3745 [4] SCREW-TAPPING (10-16X0.5-IN)  
4. 174-1490 [1] MOTOR AS-ELECTRIC  
  7T-0093 [2] PIN-CONNECTOR (12-GA TO 14-GA)  
  177-9645 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  177-9643 [1] LOCK  
  177-9644 [1] SEAL-RECEPTACLE  
5. 6P-3236 [1] SWITCH AS-ROTARY  
  6V-8362 [5] SCREW-MACHINE (8-32X0.31-IN)  
  9B-7233 [5] LOCKWASHER  
6. 7X-2049 [1] TUBE AS  
7. 8C-3756 [1] FILM-IDENTIFICATION (AIR CONDITIONER)  
8. 8C-4586 [2] CLAMP  
9. 8C-7581 M [1] SCREW-MACHINE (M4X0.7X8-MM)  
10. 100-3426 [2] WHEEL AS-BLOWER  
11. 124-7141 [2] WASHER-SPECIAL  
12. 129-1274 [4] FASTENER AS-AIR CONDITIONER  
13. 133-9012 [1] FUSE (15-AMPERE)  
14. 134-2885 [1] RESISTOR  
15. 141-9784 M [1] BOLT (M6X1X190-MM)  
16. 147-1481 [1] COVER  
17. 147-1482 [1] PLATE AS  
18. 147-1483 [1] BLOWER AS  
19. 147-1484 [1] PLATE AS  
20. 147-1486 [1] COIL AS-EVAPORATOR  
21. 147-1487 [1] GASKET  
22. 148-1319 [1] GASKET  
23. 148-1903 [1] GASKET  
24. 148-5557 [1] INSULATION  
25. 148-6737 [1] SWITCH AS-TEMPERATURE  
26. 148-6751 [1] HARNESS AS-HEATER & AIR COND  
  7K-4474 [1] CONNECTOR AS  
  6K-7361 [1] CONNECTOR-BULLET  
  6T-6505 [7] HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8L-8413 [5] STRAP-CABLE (WHITE)  
  2L-8069 [1] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  8T-9850 [5] TERMINAL-BLADE (10-GA TO 12-GA)  
  6T-6506 [2] TERMINAL-BLADE (14-GA TO 18-GA)  
  5P-1477 [4] TERMINAL-FORK (10-GA TO 12-GA, NO. 8 SCREW)  
  5P-1475 [1] TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)  
27. 151-8373 [1] GASKET  
28. 151-8376 [1] PLATE-ORIFICE  
29. 151-8377 [1] PLATE-ORIFICE  
30. 154-5630 [1] GASKET  
31. 154-5631 [1] GASKET  
32. 129-3178 M [19] LOCKNUT (M6X1-THD)  
33. 3S-2093 [2] STRAP-CABLE  
34. 6V-1668 [2] WASHER (6.5X29.1X3-MM THK)  
35. 6V-7728 M [1] BOLT (M6X1X45-MM)  
36. 8M-2771 [1] CLIP  
37. 8T-4171 M [4] BOLT (M6X1X12-MM)  
38. 8T-4205 [25] WASHER-HARD (7.2X14.5X2-MM THK)  
39. 152-6609 E SEAL-BULK (86-CM)  
40. 5P-6410 D SEAL (0.5-M)  
41. 4K-2089 [4] RIVET-POP  
42. 5P-5637 [2] SEAL  
43. 147-1485 [2] GASKET-DUCT  
44. 6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP29990868
 

154-5475: CAB AR-ENCLOSED ROPS

154-5475 CAB AR-ENCLOSED ROPS
S/N 2CR19310-UP
AN ATTACHMENT
i01216156 SEBP2999
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  167-8343 Y [1] CAB GP  
  104-6044 Y [1] CONSOLE GP-FRONT  
  104-6045 Y [1] FLOORPLATE GP  
  104-6038 Y [1] HEATER GP-CAB  
  104-6043 Y [1] LINES GP-HEATER  
  104-6031 Y [1] WASHER GP-WINDOW  
  Y [1] WIPER GP-WINDOW  
  105-5155 Y [1] WIRING GP-CAB  
  154-5414 Y [1] WIRING GP-ENGINE  
  104-5969 Y [1] WIRING GP-POWER RECEPTACLE  
  3E-8211 E FILM-STRIPE (400CM)  
  110-0037 [1] FILM (CATERPILLAR, SUN VISOR)  
  131-2747 [1] MAT-PROTECTIVE  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP29990869
 

167-8343: CAB GP

167-8343 CAB GP
S/N 2CR19310-UP
PART OF 154-5475 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
i01216176 SEBP2999
1678343 CAB GP Parts scheme 1678343 CAB GP Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-3449 Y [1] CAB GP-ENCLOSED ROPS  
2. 174-5454 [1] HARNESS AS-PLATFORM (COSA)  
  3E-3360 [5] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (KIT SERVICES CONNECTOR AS. & WEDGE)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT SERVICES RECEPTACLE AS. & WEDGE)
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
    (KIT SERVICES CONNECTOR AS. & WEDGE)
  3E-3372 [2] PLUG AS-CONNECTOR (4-PIN)  
    (EACH INCLUDES)
  102-8809 [1] KIT-CONNECTING PLUG (4-PIN)  
    (KIT SERVICES CONNECTOR AS. & WEDGE)
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
    (KIT SERVICES RECEPTACLE AS. & WEDGE)
  155-2265 [2] KIT-CONNECTING PLUG (8-PIN)  
    (KIT SERVICES CONNECTOR AS. & WEDGE)
  102-8806 [2] KIT-RECEPTACLE (8-PIN)  
    (KIT SERVICES RECEPTACLE AS. & WEDGE)
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
    (KIT SERVICES CONNECTOR AS. & WEDGE)
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
    (KIT SERVICES RECEPTACLE AS. & WEDGE)
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  8T-8737 [7] PLUG-SEAL  
3. 3S-2093 [25] STRAP-CABLE  
4. 8Y-7252 [1] GLASS  
5. 8Y-7253 [1] GLASS-CAB  
6. 8Y-7254 [1] GLASS-CAB  
7. 100-7053 [1] FENDER  
8. 100-7052 [1] FENDER  
9. 144-0195 E HOSE (820CM)  
10. 5P-4116 [31] WASHER-HARD (8.8X20.5X2-MM THK)  
11. 8T-4908 M [18] BOLT (M8X1.25X25-MM)  
12. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
13. 5C-7261 M [5] NUT (M8X1.25-THD)  
14. 6V-1392 D SEAL (0.6M)  
15. 8T-4222 [2] WASHER-PLATED (11X32X2.5-MM THK)  
16. 104-3918 [2] PLATE  
17. 106-1742 B [6] PLATE  
18. 128-7772 [1] PLATE (LH)  
19. 128-7773 [1] PLATE (RH)  
20. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
21. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
22. 8Y-7256 Y [1] WINDOW GP-CAB (REAR)  
23. 131-3987 M [13] SCREW (M4X0.7X12-MM)  
24. 147-1982 [1] CHANNEL  
25. 147-1980 [1] CHANNEL AS  
  140-9921 [1] INSERT-THREADED  
26. 159-4945 [2] KEEPER (LH)  
27. 159-4946 [2] KEEPER  
28. 8Y-7274 [1] GLASS  
29. 8Y-7272 [1] GLASS  
30. 134-3061 [1] PLATE  
31. 134-3060 [1] PLATE  
32. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
33. 154-5426 Y [1] WINDOW GP-CAB (RH)  
34. 154-5425 Y [1] WINDOW GP-CAB (LH)  
35. Y [1] DOOR GP-CAB (LH)  
36. Y [1] DOOR GP-CAB (RH)  
37. 129-5257 [8] BUSHING  
38. 129-5256 [12] BUSHING  
39. 8Y-7444 [2] PIN  
40. 8S-7803 [8] RING-RETAINING  
41. 117-7414 [2] PIN  
42. 131-3986 M [2] SCREW (M4X0.7X12-MM)  
43. 108-4311 [2] SCREW-MACHINE (3/8-16X0.75-IN)  
44. 134-3062 [2] STRIKER  
45. 134-3503 [1] GUARD-STRIKER  
46. 134-3059 [1] GUARD  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Bucket Tips - Inspect/Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Bucket Cutting Edges - Inspect/Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Bucket Tips - Inspect/Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}

Caterpillar Parts SIS Catalog 428C :

4T-2203 TIP-ABRASION
STOP GP-BUCKET
177-4904 STOP GP-BUCKET
STOP GP-BUCKET
177-4903 STOP GP-BUCKET
PLATE GP-SIDE
101-4419 PLATE GP-SIDE
MOUNTING GP-FORK
9R-5430 MOUNTING GP-FORK
MOUNTING GP-FORK
108-1587 MOUNTING GP-FORK
MOUNTING GP-BUCKET
223-1882 MOUNTING GP-BUCKET
178-3593 MOUNTING GP-BUCKET
9W-8208 TIP-PENETRATION
9W-8209 TIP-PENETRATION
TOOTH GP-UNI
9R-5866 TOOTH GP-UNI
144-2221 AIR CONDITIONER AR
145-7168 AIR CONDITIONER AR
AIR CONDITIONER GP
104-9478 AIR CONDITIONER GP
AIR CONDITIONER GP
142-9660 AIR CONDITIONER GP
154-5475 CAB AR-ENCLOSED ROPS

Truck sale:

Caterpillar 428C, Construction
53,468 
Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar 428C, Construction
53,468 
Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
 
$25,882 USD 
CATERPILLAR 428C 2000
- BACKHOE LOADERS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
CATERPILLAR 428C 2000
 
CATERPILLAR 428C 2000
- BACKHOE LOADERS
CAVILL POWER PRODUCTS PTY. LTD.
315 Main North Road ENFIELD - ADELAIDE -
CATERPILLAR 428C 1998
 
CATERPILLAR 428C 1998
- BACKHOE LOADERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.