163-9228 WIRING GP-RIDE CONTROL S/N 9KN1200-1418; 1JR1150-1155 PART OF 154-5418 CONTROL AR-RIDE AN ATTACHMENT 438C

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 163-9228 WIRING GP-
1. 166-9300 WIRING GP-
2. 166-9301 WIRING GP-
3. 175-6771 WIRING GP-
4. 175-6775 WIRING GP-
5. 136-7436 WIRING GP-
6. 147-2732 WIRING GP-
7. 163-9226 WIRING GP-

POWER TRAIN

AXLE GP

8. 119-8191 AXLE & MTG
9. 114-0165 AXLE & MTG
0. INFORMATION

BACKHOE LOADER 438C BACKHOE LOADER 1JR
438C Backhoe Loader Center Pivot, Single Tilt 1JR01150-01155 (MACHINE) POWERED BY 3054 Engine SEBP3000 438C 1JR (1996)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

163-9198 WIRING GP-POWER SHIFT

163-9227 WIRING GP-RIDE CONTROL

163-9228 WIRING GP-RIDE CONTROL

166-9300 WIRING GP-RIDE CONTROL

166-9301 WIRING GP-RIDE CONTROL

175-6771 WIRING GP-RIDE CONTROL

#SEBP30000190

163-9228: WIRING GP-RIDE CONTROL

WIRING GP-RIDE CONTROL

163-9228 WIRING GP-RIDE CONTROL
S/N 9KN1200-1418; 1JR1150-1155
PART OF 154-5418 CONTROL AR-RIDE
AN ATTACHMENT

i00987112 SEBP3000

1639228 WIRING GP-RIDE CONTROL Parts scheme

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	163-4535	[1]	SWITCH AS (RIDE CONTROL)
2.	163-1391	[1]	HARNESS AS-RIDE CONTROL (FRONT INSTRUMENT PANEL)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
	8T-8729	[8]	PIN-CONNECTOR (16-GA TO 18-GA)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)
	5P-4571	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	5P-5694	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	3S-2093	[21]	STRAP-CABLE
	111-7898	[1]	CONNECTOR (8-PIN)
	112-9611	[1]	TERMINAL-BLADE (18-GA TO 20-GA)
3.	197-3173	[1]	HARNESS AS-RIDE CONTROL (FRAME)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
4.	3E-7572	[1]	RELAY AS (12-VOLT)
5.	9W-0267	[1]	CLIP-RELAY
6.	106-8704	[1]	SUPPRESSOR AS-ARC
7.	163-3137	[1]	HARNESS AS-RIDE CONTROL (PLATFORM)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[1]	STRAP-CABLE
8.	4P-8134	[1]	CLIP (LADDER)(SLOT)
9.	131-9203	[1]	SWITCH AS-PRESSURE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
10.	113-8491	[1]	FUSE (15-AMPERE)
17.	3S-2093	[16]	STRAP-CABLE
19.	3J-1907	[1]	SEAL-O-RING
	D		ORDER BY THE METER

#SEBP30000191

166-9300: WIRING GP-RIDE CONTROL

WIRING GP-RIDE CONTROL

166-9300 WIRING GP-RIDE CONTROL
S/N 9KN1200-1418; 1JR1150-1155
PART OF 163-9210 KIT-RIDE CONTROL
AN ATTACHMENT

i01093156 SEBP3000

1669300 WIRING GP-RIDE CONTROL Parts scheme

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	163-4534	[1]	SWITCH AS-ROCKER (RIDE CONTROL)
	111-7899	[1]	GASKET
2.	163-1390	[1]	HARNESS AS-RIDE CONTROL (FRONT CONSOLE)
	5P-4571	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	5P-5694	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	112-9611	[5]	TERMINAL-BLADE (18-GA TO 20-GA)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)
	111-7898	[1]	CONNECTOR (8-PIN)
	8T-8730	[10]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[21]	STRAP-CABLE
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3.	163-4531	[1]	PLATE AS (LH)
4.	3E-7572	[1]	RELAY AS (12-VOLT)
5.	9W-0267	[1]	CLIP-RELAY
6.	106-8704	[1]	SUPPRESSOR AS-ARC
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
7.	163-3136	[1]	HARNESS AS-RIDE CONTROL (PLATFORM)
	8T-8729	[8]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	197-3174	[1]	HARNESS AS-RIDE CONTROL (CHASSIS)
	8T-8729	[11]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	8T-8730	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
9.	131-9203	[1]	SWITCH AS-PRESSURE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
10.	113-8491	[1]	FUSE (15-AMPERE)
11.	4P-8134	[1]	CLIP (LADDER)
17.	3S-2093	[17]	STRAP-CABLE
19.	3J-1907	[1]	SEAL-O-RING
	D		ORDER BY THE METER

#SEBP30000192

166-9301: WIRING GP-RIDE CONTROL

WIRING GP-RIDE CONTROL

166-9301 WIRING GP-RIDE CONTROL
S/N 9KN1200-1418; 1JR1150-1155
PART OF 163-9209 KIT-RIDE CONTROL
AN ATTACHMENT

i01085546 SEBP3000

1669301 WIRING GP-RIDE CONTROL Parts scheme

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	163-4535	[1]	SWITCH AS (RIDE CONTROL)
	111-7899	[1]	GASKET
2.	163-1391	[1]	HARNESS AS-RIDE CONTROL (FRONT INSTRUMENT PANEL)
	111-7898	[1]	CONNECTOR (8-PIN)
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[21]	STRAP-CABLE
	5P-4571	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	5P-5694	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	112-9611	[1]	TERMINAL-BLADE (18-GA TO 20-GA)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3.	163-4531	[1]	PLATE AS (LH)
4.	3E-7572	[1]	RELAY AS (12-VOLT)
5.	9W-0267	[1]	CLIP-RELAY
6.	106-8704	[1]	SUPPRESSOR AS-ARC
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
7.	163-3137	[1]	HARNESS AS-RIDE CONTROL (PLATFORM)
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[1]	STRAP-CABLE
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	197-3173	[1]	HARNESS AS-RIDE CONTROL (FRAME)
	8T-8729	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
9.	131-9203	[1]	SWITCH AS-PRESSURE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
10.	113-8491	[1]	FUSE (15-AMPERE)
11.	145-9986	[1]	HARNESS AS-PANEL (QUICK COUPLER SWITCHES, SOL)
	111-7898	[2]	CONNECTOR (8-PIN)
	8T-8737	[1]	PLUG-SEAL
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[14]	STRAP-CABLE
	5P-4571	[1]	TERMINAL-BLADE (14-GA TO 16-GA)
	5P-5694	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
	112-9611	[5]	TERMINAL-BLADE (18-GA TO 20-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
12.	163-4532	[1]	PLATE AS (RH)
13.	163-4533	[1]	PLATE (RH)
14.	4P-8134	[1]	CLIP (LADDER)
17.	3S-2093	[21]	STRAP-CABLE
19.	3J-1907	[1]	SEAL-O-RING
	D		ORDER BY THE METER

#SEBP30000193

175-6771: WIRING GP-RIDE CONTROL

WIRING GP-RIDE CONTROL

175-6771 WIRING GP-RIDE CONTROL
S/N 9KN1200-1418; 1JR1150-1155
PART OF 175-6773, 179-6275 CONTROL AR-RIDE
AN ATTACHMENT

i01168341 SEBP3000

1756771 WIRING GP-RIDE CONTROL Parts scheme

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	175-6769	[1]	SWITCH AS-ROCKER (RIDE CONTROL)
	111-7899	[1]	GASKET
2.	163-1390	[1]	HARNESS AS-RIDE CONTROL (FRONT CONSOLE)
	111-7898	[1]	CONNECTOR (8-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8730	[10]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[21]	STRAP-CABLE
	5P-4571	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	5P-5694	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	112-9611	[5]	TERMINAL-BLADE (18-GA TO 20-GA)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(2-DM)
3.	4P-8134	[1]	CLIP (LADDER)
4.	3E-7572	[1]	RELAY AS (12-VOLT)
5.	9W-0267	[1]	CLIP-RELAY
6.	189-3158	[1]	SUPPRESSOR-ARC
7.	163-3136	[1]	HARNESS AS-RIDE CONTROL (PLATFORM)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3389	[1]	WEDGE-RECEPTACLE LOCK (8-PIN)
	8T-8729	[8]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
8.	197-3174	[1]	HARNESS AS-RIDE CONTROL (CHASSIS)
	8T-8729	[11]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[2]	PLUG-SEAL
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	3E-3389	[1]	WEDGE-RECEPTACLE LOCK (8-PIN)
9.	131-9203	[1]	SWITCH AS-PRESSURE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
10.	113-8491	[1]	FUSE (15-AMPERE)
17.	3S-2093	[17]	STRAP-CABLE
19.	3J-1907	[1]	SEAL-O-RING
	D		ORDER BY THE METER

#SEBP30000194

175-6775: WIRING GP-RIDE CONTROL

WIRING GP-RIDE CONTROL

175-6775 WIRING GP-RIDE CONTROL
S/N 9KN1200-1418; 1JR1150-1155
PART OF 175-6777 KIT-RIDE CONTROL
AN ATTACHMENT

i01164866 SEBP3000

1756775 WIRING GP-RIDE CONTROL Parts scheme

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	175-6769	[1]	SWITCH AS-ROCKER (RIDE CONTROL)
	111-7899	[1]	GASKET
2.	163-1390	[1]	HARNESS AS-RIDE CONTROL (FRONT CONSOLE)
	111-7898	[1]	CONNECTOR (8-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8730	[10]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[21]	STRAP-CABLE
	5P-4571	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	5P-5694	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	112-9611	[5]	TERMINAL-BLADE (18-GA TO 20-GA)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)
3.	163-4531	[1]	PLATE AS (LH)
4.	3E-7572	[1]	RELAY AS (12-VOLT)
5.	9W-0267	[1]	CLIP-RELAY
6.	106-8704	[1]	SUPPRESSOR AS-ARC
7.	163-3136	[1]	HARNESS AS-RIDE CONTROL (PLATFORM)
	8T-8729	[8]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
8.	197-3174	[1]	HARNESS AS-RIDE CONTROL (CHASSIS)
	8T-8729	[11]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[2]	PLUG-SEAL
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
9.	131-9203	[1]	SWITCH AS-PRESSURE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
10.	113-8491	[1]	FUSE (15-AMPERE)
11.	4P-8134	[1]	CLIP (LADDER)
17.	3S-2093	[17]	STRAP-CABLE
19.	3J-1907	[1]	SEAL-O-RING
	D		ORDER BY THE METER

#SEBP30000195

136-7436: WIRING GP-STABILIZER ALARM

WIRING GP-STABILIZER ALARM

136-7436 WIRING GP-STABILIZER ALARM
S/N 9KN1200-1418; 1JR1150-1155
PART OF 123-4203 CONVERSION AR-CERTIFICATION
AN ATTACHMENT

i00644987 SEBP3000

1367436 WIRING GP-STABILIZER ALARM Parts scheme

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	136-6876	[1]	BRACKET
2.	155-6228	[2]	PLATE
3.	142-3340	[1]	SWITCH AS-LIMIT (STABILIZER LEG)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
4.	8T-3998 M	[2]	BOLT (M4X0.7X12-MM)
5.	136-7432	[1]	HARNESS AS-WIRING (STABILIZER)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[13]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
6.	136-7430	[1]	HARNESS AS-PANEL (STABILIZER)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	2L-8076	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	5P-4571	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	136-5185	[1]	ALARM-WARNING
8.	4B-4863	[4]	WASHER (4.7X11X1.2-MM THK)
9.	3S-2093	[20]	STRAP-CABLE
10.	136-7437	[1]	BRACKET AS
11.	5C-8312 M	[2]	NUT (M4X0.7-THD)
12.	4P-8134	[1]	CLIP (LADDER)
13.	9X-2043 M	[2]	SCREW-TRUSS HEAD (M6X1X14-MM)
14.	189-3158	[2]	SUPPRESSOR-ARC
	M		METRIC PART

#SEBP30000196

147-2732: WIRING GP-STABILIZER ALARM

WIRING GP-STABILIZER ALARM

147-2732 WIRING GP-STABILIZER ALARM
S/N 9KN1200-1418; 1JR1150-1155
SIDESHIFT
PART OF 147-3101 CONVERSION AR-CERTIFICATION
AN ATTACHMENT

i00672199 SEBP3000

1472732 WIRING GP-STABILIZER ALARM Parts scheme

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	136-6876	[1]	BRACKET
2.	155-6228	[2]	PLATE
3.	142-3340	[1]	SWITCH AS-LIMIT (STABILIZER LEG)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
4.	8T-3998 M	[2]	BOLT (M4X0.7X12-MM)
5.	3E-9362	[1]	RELAY AS (12-VOLT)(ALARM)
6.	147-2741	[1]	HARNESS AS-WIRING (STABILIZER)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	136-5185	[1]	ALARM-WARNING
8.	4B-4863	[4]	WASHER (4.7X11X1.2-MM THK)
9.	3S-2093	[10]	STRAP-CABLE
10.	136-7437	[1]	BRACKET AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
11.	5C-8312 M	[2]	NUT (M4X0.7-THD)
12.	4P-8134	[1]	CLIP (LADDER)
13.	9X-2043 M	[2]	SCREW-TRUSS HEAD (M6X1X14-MM)
14.	147-2740	[1]	HARNESS AS-PANEL (STABILIZER)
	111-6795	[1]	HOUSING-RELAY
	111-6816	[1]	LOCK
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[7]	STRAP-CABLE
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACK PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	5P-1476	[1]	TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)
	2L-8076	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	5P-4571	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
	112-9611	[4]	TERMINAL-BLADE (18-GA TO 20-GA)
	M		METRIC PART

#SEBP30000197

163-9226: WIRING GP-STEERING

WIRING GP-STEERING

163-9226 WIRING GP-STEERING
S/N 1JR1150-1155
PART OF 154-5434 POWER TRAIN AR

i01135065 SEBP3000

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-6257	[1]	HARNESS AS-STEERING
2.	148-4505	[3]	SUPPRESSOR GP-ELECTRONIC
3.	122-7137	[1]	LAMP (12-VOLT)
4.	164-9638	[1]	HARNESS AS-STEERING
5.	115-1970	[1]	SWITCH AS-TOGGLE
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
6.	4P-8134	[1]	CLIP (LADDER)
7.	113-8490	[1]	FUSE (10-AMPERE)
8.	138-8454 M	[8]	SCREW-TRUSS HEAD (M4X0.7X10-MM)
9.	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(KIT INCLUDES WEDGE)
10.	3E-3389	[1]	WEDGE-RECEPTACLE LOCK (8-PIN)
11.	109-2356	[3]	PLUG
12.	128-5091	[1]	SWITCH AS-PRESSURE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INCLUDES WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
13.	3J-1907	[1]	SEAL-O-RING
14.	3S-2093	[26]	STRAP-CABLE
15.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
16.	104-5065	[1]	BRACKET AS
17.	104-5064	[1]	COVER
18.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
19.	107-9677	[1]	SENSOR AS-POSITION (ALL WHEEL STEER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813		SLEEVE (15 CM)
20.	104-5066	[1]	LEVER
21.	9R-2806	[1]	PIN
22.	9R-2807	[1]	CLIP (RETAINER)
23.	8T-4138 M	[3]	BOLT (M6X1X20-MM)
24.	8T-0337 M	[3]	SCREW-MACHINE (M4X0.7X12-MM)
25.	4B-4863	[3]	WASHER (4.7X11X1.2-MM THK)
26.	104-5071	[1]	CLAMP AS
27.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
28.	4P-7581	[1]	CLIP (LADDER)
29.	108-1540	[1]	PLUG
30.	3E-7572	[3]	RELAY AS (12-VOLT)
31.	106-8704	[2]	SUPPRESSOR AS-ARC
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
32.	7X-2533 M	[1]	BOLT (M6X1X35-MM)
33.	6V-9327 M	[1]	SETSCREW-SOCKET (M6X1-THD)
34.	163-4531	[1]	PLATE AS (LH)
35.	7K-1181	[2]	STRAP-CABLE
36.	130-0146	[1]	CONTROL GP-BUCKET POSITIONER
37.	128-8567	[1]	INDICATOR AS-AWS
	122-7137	[1]	LAMP (12-VOLT)
	123-0306	[1]	SOCKET AS
38.	129-5078	[1]	INDICATOR AS-REAR STEERING
	4B-2043	[5]	NUT (8-32-THD)
	9B-7233	[5]	LOCKWASHER
39.	130-6255	[1]	HARNESS AS-STEERING
40.	130-6256	[1]	HARNESS AS-STEERING
41.	9W-0267	[3]	CLIP-RELAY
42.	161-2905	[1]	HARNESS AS-STEERING
43.	130-6662	[1]	FILM
44.	164-6906 C	[1]	FILM-INSTRUCTION (ALL WHEEL STEER)
45.	163-4532	[1]	PLATE AS (RH)
46.	034-1432	[2]	STRAP-CABLE
47.	134-2305	[1]	SEAL
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP30000198

119-8191: AXLE & MTG GP-DRIVE & STEERING

AXLE & MTG GP-DRIVE & STEERING

119-8191 AXLE & MTG GP-DRIVE & STEERING -REAR
S/N 1JR1150-1155
PART OF 174-5441, 174-5442 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT

i00522472 SEBP3000

1198191 AXLE & MTG GP-DRIVE & STEERING Parts scheme

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	055-1990	[1]	VENT
2.	119-8190 Y	[1]	AXLE GP-DRIVE & STEERING (REAR)
3.	130-2697	[2]	VALVE-VENT
4.	7X-2570 M	[8]	BOLT (M20X2.5X220-MM)
5.	8T-4131 M	[8]	NUT (M20X2.5-THD)
6.	8T-5439	[16]	WASHER-HARD (21.5X45X6-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP30000199

114-0165: AXLE & MTG GP-REAR

AXLE & MTG GP-REAR

114-0165 AXLE & MTG GP-REAR
S/N 9KN1200-1418
PART OF 174-5437, 174-5438 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT

i00784958 SEBP3000

For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5F-5434	[1]	VALVE AS-VENT (FINAL DRIVE, AXLE)
2.	156-2857 CY	[1]	AXLE GP-REAR
3.	7X-2570 M	[8]	BOLT (M20X2.5X220-MM)
4.	8T-4131 M	[8]	NUT (M20X2.5-THD)
5.	8T-5439	[16]	WASHER-HARD (21.5X45X6-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery - Recycle
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Alert Indicators
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Quick Coupler Control (Loader) - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Battery Electrolyte Level - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Auxiliary Circuit Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Battery or Battery Cable - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Fuses - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Hydraulic Lock Control - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Alert Indicators
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Loader Quick Coupler Control - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Battery or Battery Cable - Inspect/Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

<B>Installing a Replacement Platform Harness As on Certain Backhoe Loaders</B> {1408}
Installing a Replacement Platform Harness As on Certain Backhoe Loaders {1408}

Service Letter-NACD

Product Support Program For Replacing The Wheel Angle Gauge On Certain 438C Backhoe Loaders
Product Support Program For Replacing The Wheel Angle Gauge On Certain 438C Backhoe Loaders

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Technical Information Bulletin

Shortened Service Life Of The Air Ride Seat Relay
Shortened Service Life Of The Air Ride Seat Relay

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Product Support Program For Replacing The Wheel Angle Gauge On Certain 438C Backhoe Loaders
Product Support Program For Replacing The Wheel Angle Gauge On Certain 438C Backhoe Loaders

Service Letter-Asia

Systems Operation

General Information
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Transmission Electronic Control Module (ECM)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Switches
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Sensors
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Diagnostic Operation
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Relays
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Product Support Program For Replacing The Wheel Angle Gauge On Certain 438C Backhoe Loaders
Product Support Program For Replacing The Wheel Angle Gauge On Certain 438C Backhoe Loaders

Testing and Adjusting

General Information
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Electrical Components And Connector Locations
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Initial Troubleshooting Procedure
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Using the Diagnostic Indicator to Determine Diagnostic Codes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Using Electronic Control Analyzer Programmer (ECAP) to Determine Diagnostic Codes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Using Caterpillar Electronic Technician (ET) to Determine Diagnostic Codes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Power Supply for Electronic Control Module (Transmission) - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Diagnostic Indicator - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Fifth Gear Lockout Switch - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Switch (Neutralizer) - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Neutral Lock Switch - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Switch (Parking Brake) - Troubleshoot
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Electronic Control Module (ECM) - Configure
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Electronic Control Module (ECM) - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

System Schematic
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Glossary of Terms
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

CID 0520 FMI 02 Transmission Configuration Incorrect - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

CID 0650 FMI 02 Harness Code Incorrect - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

CID 0683 FMI 03 Relay (Parking Brake) Voltage Above Normal - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

CID 0683 FMI 05 Relay (Parking Brake) Current Below Normal - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

CID 0683 FMI 06 Relay (Parking Brake) Current Above Normal - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

Troubleshooting Diagnostic Codes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System

System Schematic
Machine Security System

Electric Starting System - Test
3054 Engine

Electrical Connector - Inspect
Machine Security System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
MSS3s Machine Security System

Troubleshooting

Electrical Component and Connector Locations
Machine Security System

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Cat Data Link - Test
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System

Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System

Connector Locations
MSS3s Machine Security System

Connector Contact Description
MSS3s Machine Security System

Electrical Connector - Inspect
MSS3s Machine Security System

Service Magazine

Parts Manuals May List Air Conditioning Compressors Incorrectly {1802,1809,7320}
1996/10/07

Improved All Wheel Drive (AWD) Switch Assembly Used In Production{1429}
1998/03/16

Correction To SENR1275 And SENR1276 Electrical Schematics {7490}
1998/06/29

Improved Cab Harness Accommodates Additional Relay {1408}
1999/05/03

New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29

A New Relay for the Air Conditioner Improves Machine Performance {1408, 7320}
2000/05/01

Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10

A New Receptacle Provides a Reliable Connection {1408, 1431, 5258, 7301}
2000/07/10

A New Harness Is Available for Brooms {1408}
2000/06/05

Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/10/23

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09

Improved Service Meter Used {7478}
2004/05/03

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 438C :

163-9227 WIRING GP-RIDE CONTROL

163-9198 WIRING GP-POWER SHIFT

104-9510 WIRING GP-POWER RECEPTACLE

104-5969 WIRING GP-POWER RECEPTACLE

154-5411 WIRING GP-MACHINE

149-5234 WIRING GP-LOAD CONTROL

122-1645 WIRING GP-KICKOUT & POSITIONER

154-5414 WIRING GP-ENGINE

166-9300 WIRING GP-RIDE CONTROL

166-9301 WIRING GP-RIDE CONTROL

175-6771 WIRING GP-RIDE CONTROL

175-6775 WIRING GP-RIDE CONTROL

136-7436 WIRING GP-STABILIZER ALARM

147-2732 WIRING GP-STABILIZER ALARM

163-9226 WIRING GP-STEERING

119-8191 AXLE & MTG GP-DRIVE & STEERING

Truck sale:

Caterpillar 438C
- backhoe loader
CGT - COMPAGNIA GENERALE TRATTORI

35.061

Caterpillar 438CAWS, baggerlader, Bau-Und Bergbauausrüstung
- backhoe loader
BERGERAT MONNOYEUR S.A.S.

42,862

Caterpillar 438CAWS, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium

Caterpillar 438C, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium

CATERPILLAR 438C 2000
- BACKHOE LOADERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -