AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

111-7814 TRANSMISSION GP-DIRECT DRIVE S/N 1TR1550-2096; 2DR3250-3741 PART OF 107-3762 TRANSMISSION AR-DIRECT DRIVE Type 1 AN ATTACHMENT 438C


POWER TRAIN
TRANSMISSION GP
VALVE GP-RELIEF

BACKHOE LOADER 438C BACKHOE LOADER 1TR
 438C Backhoe Loader Side shift, Parallel Lift 1TR01550-02096 (MACHINE) POWERED BY 3054 Engine SEBP3001 438C 1TR   (1996)

POWER TRAIN

TRANSMISSION GP
107-3762 TRANSMISSION AR-DIRECT DRIVE
142-4437 TRANSMISSION AR-POWER SHIFT
TRANSMISSION GP-DIRECT DRIVE
111-7814 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7814 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7814 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7814 TRANSMISSION GP-DIRECT DRIVE
 

#SEBP30010230
 

111-7814: TRANSMISSION GP-DIRECT DRIVE

111-7814 TRANSMISSION GP-DIRECT DRIVE
S/N 1TR1550-2096; 2DR3250-3741
PART OF 107-3762 TRANSMISSION AR-DIRECT DRIVE
Type 1
AN ATTACHMENT
i00483150 SEBP3001
1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-5748 M [7] BOLT (M8X1.25X55-MM)  
2. 121-7396 [1] VALVE GP-RELIEF (TORQUE CONVERTER)  
2A. 6V-4589 [1] SEAL-O-RING  
2B. 8L-2746 [1] SEAL-O-RING  
3. 121-7405 [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
3A. 7X-4744 [1] SEAL-O-RING  
3B. 6V-9178 [1] SEAL-O-RING  
3C. 106-9586 [1] SEAL-O-RING  
4. 122-3652 [2] PLUG  
5. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
6. 175-0054 [1] SEAL-O-RING  
7. 174-9711 [1] GASKET  
8. 120-9590 [1] CASE AS  
9. 156-9275 [1] CASE-REAR TRANSMISSION  
10. 9S-4191 [11] PLUG (9/16-18-THD)  
11. 3J-1907 [12] SEAL-O-RING  
12. 6V-8335 M [14] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
13. 7T-3022 [2] SLEEVE  
14. 123-8906 [3] CUP-TAPERED ROLLER  
15. 123-8905 [3] CONE-BEARING  
16. 9U-8886 [4] RING-SEAL  
17. 7T-3021 [2] SYNCHRONIZER GP  
18. 121-0490 [1] RING-RETAINING  
19. 121-0630 [1] RETAINER  
20. 121-0697 [1] WASHER-THRUST (45X65X5-MM THK)  
21. 172-6050 [2] BEARING-SPECIAL  
22. 095-0927 [1] RING-RETAINING  
23. 121-0714 [1] PISTON  
24. 178-9566 [1] SPRING-PISTON  
25. 121-0885 [1] RETAINER  
26. 6T-9196 [1] SEAL  
27. 6T-9194 [9] PLATE  
28. 6Y-7957 [8] DISC-FRICTION  
29. 121-0900 [1] SHAFT AS-OUTPUT (FRONT)  
30. 121-0904 [1] GEAR AS (36-TEETH)  
31. 123-8912 [2] BEARING-ROLLER  
32. 122-1877 [1] WASHER-THRUST (40X65X4-MM THK)  
33. 121-1223 [1] GEAR (35-TEETH)  
34. 121-1251 [1] GEAR (28-TEETH)  
35. 117-4650 [1] GEAR (37-TEETH)  
36. 6T-9160 [1] GEAR (43-TEETH)  
37. 121-1253 [1] GEAR (37-TEETH)  
38. 6V-8500 [2] BEARING  
39. 7T-3017 [1] SPACER (52.5X59X9.6-MM THK)  
40. 7T-3018 [1] SLEEVE  
41. 6Y-2326 [1] RING  
42. 122-1878 [1] RING-SEAL  
43. 122-1879 [1] SPACER (58X67.5X2-MM THK)  
44. 104-3288 B SHIM (0.05-MM THK)  
45. 121-2059 B SHIM (0.08-MM THK)  
46. 121-2060 B SHIM (0.18-MM THK)  
47. 121-2061 B SHIM (0.6-MM THK)  
48. 121-2062 [1] WASHER-THRUST (35X55X4-MM THK)  
49. 7T-3034 [1] SPACER (56.9X64.5X1.98-MM)  
50. 6T-9144 B SHIM (0.051-MM THK)  
51. 6T-9147 B SHIM (0.076-MM THK)  
52. 6T-9146 B SHIM (0.127-MM THK)  
53. 6T-9145 B SHIM (0.178-MM THK)  
54. 6T-9143 B SHIM (0.381-MM THK)  
55. 6T-9142 B SHIM (0.508-MM THK)  
56. 005-0469 [2] CUP-BEARING  
57. 005-0471 [2] CONE-BEARING  
58. 121-2063 [1] SHAFT-OUTPUT (REAR)  
59. 123-8910 [1] CUP-TAPERED ROLLER  
60. 123-8909 [1] CONE-BEARING  
61. 7T-2646 B [2] SPACER (66X79.5X2.02-MM THK)  
62. 6T-9166 B [2] SHIM (0.051-MM THK)  
63. 6T-9165 B [2] SHIM (0.076-MM THK)  
64. 6T-9164 B [2] SHIM (0.178-MM THK)  
65. 6T-9163 B [2] SHIM (0.599-MM THK)  
66. 7T-3051 [1] PLUG  
67. 8T-1580 [1] CUP-BEARING  
68. 8T-1581 [1] BEARING-TAPERED ROLLER  
69. 6Y-2737 [1] CUP-BEARING  
70. 6Y-2736 [1] CONE-BEARING  
71. 121-2500 [3] WASHER-THRUST (50X70X4-MM THK)  
72. 121-2511 [1] SHAFT  
73. 121-2537 [1] SHAFT-REVERSE  
74. 121-2545 [1] SHAFT AS-INPUT  
  123-0714 [1] BEARING  
  123-2920 [3] PLUG  
75. 121-2603 [1] GEAR (24-TEETH)  
76. 121-2604 [1] GEAR (27-TEETH)  
77. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
78. 122-1882 [2] PLATE-END  
79. 122-1881 [12] PLATE-CLUTCH  
80. 122-1880 [12] DISC  
81. 6V-8757 [3] RING-RETAINING  
82. 121-2801 [2] RETAINER  
83. 121-2802 [2] SPRING  
84. 121-2803 [2] PISTON  
85. 122-1875 [2] SEAL  
86. 122-1874 [2] SEAL-O-RING  
87. 122-6783 [2] RING-SEAL  
88. 6V-4368 [2] SEAL-O-RING  
89. 121-9875 M [4] BOLT (M10X1.5X55-MM)  
90. 122-6787 [2] YOKE AS  
    (EACH INCLUDES)
  [1] GUARD  
91. 122-1883 [1] SPACER (38X45X5-MM THK)  
92. 122-1885 [2] SPACER (51X55X4-MM THK)  
93. 123-8913 [4] BEARING-ROLLER  
94. 172-5317 [2] BEARING-SPECIAL  
95. 122-3649 [2] RING-RETAINING  
96. 7T-3195 [2] WASHER (12.3X47X6.35-MM THK)  
97. 123-2920 [1] PLUG  
98. 6V-8097 M [2] BOLT (M12X1.75X30-MM)  
99. 5P-8066 [2] SEAL-O-RING  
100. 122-1884 [1] SPACER (45X49X8-MM THK)  
101. 121-7385 [1] PUMP GP-TRANSMISSION (DIRECT DRIVE)  
102. 7X-4741 [1] SEAL  
103. 122-1886 [1] RING-SEAL  
104. 014-5645 [3] BALL  
105. 6Y-1341 [2] SPRING  
106. 121-7403 [1] FORK-SHIFT  
107. 121-7389 [1] ROD AS-GEARSHIFT (FIRST, SECOND)  
108. 121-7390 [1] ROD AS-GEARSHIFT  
109. 7T-3249 [2] SCREW (3/8-24X0.75-IN)  
110. 123-8907 [2] CONE-BEARING  
111. 123-8908 [2] CUP-TAPERED ROLLER  
112. 7T-3109 [1] PIN  
113. 121-7404 [1] FORK-SHIFT  
114. 127-3017 [1] SEAT AS  
115. 6V-5100 [1] SEAL-O-RING  
116. 3S-2093 [1] STRAP-CABLE  
117. 1U-8846 B [1] SEALANT-GASKET  
118. 123-2919 M [2] NUT (M11X1-THD)  
119. 122-1876 [1] TUBE  
120. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
121. 123-2918 [2] SLEEVE  
122. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
123. 121-7399 B SHIM (0.05-MM THK)  
124. 121-7400 B SHIM (0.08-MM THK)  
125. 121-7401 B SHIM (0.18-MM THK)  
126. 121-7402 B SHIM (0.6-MM THK)  
127. 121-1252 [1] HOUSING  
128. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
129. 121-4036 Y [1] VALVE GP-SOLENOID  
130. 142-1468 Y [1] VALVE GP-SOLENOID  
131. 119-4740 [1] FILTER-OIL (STANDARD EFFICIENCY)  
132. 3G-6927 [1] ADAPTER  
133. 7T-3253 [2] DOWEL  
134. 8T-2193 [2] SEAL-LIP TYPE  
135. 7T-2651 [1] STRAINER-SUCTION (TRANSMISSION)  
136. 4F-7952 [1] SEAL-O-RING  
137. 9W-5460 [1] RING  
138. 106-9861 [1] PLATE AS-COVER  
139. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
140. 7T-3251 [1] BREATHER (TRANSMISSION)  
141. 121-7391 [1] LEVER  
142. 120-9762 [4] SEAL-O-RING  
143. 7T-3111 [1] COVER  
144. 6K-0806 [1] STRAP-CABLE  
145. 1H-9721 [1] PLUG-EXPANSION  
146. 122-6785 [1] PLUG AS  
147. 7T-3119 [1] HOUSING  
148. 6Y-2035 [1] GASKET  
149. 6V-7731 M [2] BOLT (M10X1.5X70-MM)  
150. 121-0709 [1] SPRING  
151. 3D-2824 [1] SEAL-O-RING  
152. 6B-8208 [1] BALL  
153. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30010231
 

111-7814: TRANSMISSION GP-DIRECT DRIVE

111-7814 TRANSMISSION GP-DIRECT DRIVE
S/N 1TR1550-2096; 2DR3250-3741
PART OF 107-3762 TRANSMISSION AR-DIRECT DRIVE
Type 2
AN ATTACHMENT
i01346575 SEBP3001
1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-5748 M [7] BOLT (M8X1.25X55-MM)  
2. 121-7396 [1] VALVE GP-RELIEF (TORQUE CONVERTER)  
2A. 6V-4589 [1] SEAL-O-RING  
2B. 8L-2746 [1] SEAL-O-RING  
3. 121-7405 [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
3A. 7X-4744 [1] SEAL-O-RING  
3B. 6V-9178 [1] SEAL-O-RING  
3C. 106-9586 [1] SEAL-O-RING  
4. 122-3652 [2] PLUG  
5. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
6. 175-0054 [1] SEAL-O-RING  
7. 174-9711 [1] GASKET  
8. 120-9590 [1] CASE AS  
9. 156-9275 [1] CASE-REAR TRANSMISSION  
10. 9S-4191 [11] PLUG (9/16-18-THD)  
11. 3J-1907 [12] SEAL-O-RING  
12. 6V-8335 M [14] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
13. 7T-3022 [2] SLEEVE  
14. 123-8906 [3] CUP-TAPERED ROLLER  
15. 123-8905 [3] CONE-BEARING  
16. 9U-8886 [4] RING-SEAL  
17. 7T-3021 [2] SYNCHRONIZER GP  
18. 121-0490 [1] RING-RETAINING  
19. 121-0630 [1] RETAINER  
20. 121-0697 [1] WASHER-THRUST (45X65X5-MM THK)  
21. 172-6050 [2] BEARING-SPECIAL  
22. 095-0927 [1] RING-RETAINING  
23. 121-0714 [1] PISTON  
24. 178-9566 [1] SPRING-PISTON  
25. 121-0885 [1] RETAINER  
26. 6T-9196 [1] SEAL  
27. 6T-9194 [9] PLATE  
28. 6Y-7957 [8] DISC-FRICTION  
29. 121-0900 [1] SHAFT AS-OUTPUT (FRONT)  
30. 121-0904 [1] GEAR AS (36-TEETH)  
31. 123-8912 [2] BEARING-ROLLER  
32. 122-1877 [1] WASHER-THRUST (40X65X4-MM THK)  
33. 121-1223 [1] GEAR (35-TEETH)  
34. 121-1251 [1] GEAR (28-TEETH)  
35. 117-4650 [1] GEAR (37-TEETH)  
36. 6T-9160 [1] GEAR (43-TEETH)  
37. 121-1253 [1] GEAR (37-TEETH)  
38. 6V-8500 [2] BEARING  
39. 7T-3017 [1] SPACER (52.5X59X9.6-MM THK)  
40. 7T-3018 [1] SLEEVE  
41. 6Y-2326 [1] RING  
42. 122-1878 [1] RING-SEAL  
43. 122-1879 [1] SPACER (58X67.5X2-MM THK)  
44. 104-3288 B SHIM (0.05-MM THK)  
45. 121-2059 B SHIM (0.08-MM THK)  
46. 121-2060 B SHIM (0.18-MM THK)  
47. 121-2061 B SHIM (0.6-MM THK)  
48. 121-2062 [1] WASHER-THRUST (35X55X4-MM THK)  
49. 7T-3034 [1] SPACER (56.9X64.5X1.98-MM)  
50. 6T-9144 B SHIM (0.051-MM THK)  
51. 6T-9147 B SHIM (0.076-MM THK)  
52. 6T-9146 B SHIM (0.127-MM THK)  
53. 6T-9145 B SHIM (0.178-MM THK)  
54. 6T-9143 B SHIM (0.381-MM THK)  
55. 6T-9142 B SHIM (0.508-MM THK)  
56. 005-0469 [2] CUP-BEARING  
57. 005-0471 [2] CONE-BEARING  
58. 121-2063 [1] SHAFT-OUTPUT (REAR)  
59. 123-8910 [1] CUP-TAPERED ROLLER  
60. 123-8909 [1] CONE-BEARING  
61. 7T-2646 B [2] SPACER (66X79.5X2.02-MM THK)  
62. 6T-9166 B [2] SHIM (0.051-MM THK)  
63. 6T-9165 B [2] SHIM (0.076-MM THK)  
64. 6T-9164 B [2] SHIM (0.178-MM THK)  
65. 6T-9163 B [2] SHIM (0.599-MM THK)  
66. 7T-3051 [1] PLUG  
67. 8T-1580 [1] CUP-BEARING  
68. 8T-1581 [1] BEARING-TAPERED ROLLER  
69. 6Y-2737 [1] CUP-BEARING  
70. 6Y-2736 [1] CONE-BEARING  
71. 121-2500 [3] WASHER-THRUST (50X70X4-MM THK)  
72. 121-2511 [1] SHAFT  
73. 121-2537 [1] SHAFT-REVERSE  
74. 121-2545 [1] SHAFT AS-INPUT  
  123-0714 [1] BEARING  
  123-2920 [3] PLUG  
75. 121-2603 [1] GEAR (24-TEETH)  
76. 121-2604 [1] GEAR (27-TEETH)  
77. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
78. 122-1882 [2] PLATE-END  
79. 122-1881 [12] PLATE-CLUTCH  
80. 122-1880 [12] DISC  
81. 6V-8757 [3] RING-RETAINING  
82. 121-2801 [2] RETAINER  
83. 121-2802 [2] SPRING  
84. 121-2803 [2] PISTON  
85. 122-1875 [2] SEAL  
86. 122-1874 [2] SEAL-O-RING  
87. 122-6783 [2] RING-SEAL  
88. 6V-4368 [2] SEAL-O-RING  
89. 121-9875 M [4] BOLT (M10X1.5X55-MM)  
90. 122-6787 [2] YOKE AS  
    (EACH INCLUDES)
  [1] GUARD  
91. 122-1883 [1] SPACER (38X45X5-MM THK)  
92. 122-1885 [2] SPACER (51X55X4-MM THK)  
93. 123-8913 [4] BEARING-ROLLER  
94. 172-5317 [2] BEARING-SPECIAL  
95. 122-3649 [2] RING-RETAINING  
96. 7T-3195 [2] WASHER (12.3X47X6.35-MM THK)  
97. 123-2920 [1] PLUG  
98. 6V-8097 M [2] BOLT (M12X1.75X30-MM)  
99. 5P-8066 [2] SEAL-O-RING  
100. 122-1884 [1] SPACER (45X49X8-MM THK)  
101. 121-7385 [1] PUMP GP-TRANSMISSION (DIRECT DRIVE)  
102. 7X-4741 [1] SEAL  
103. 122-1886 [1] RING-SEAL  
104. 014-5645 [3] BALL  
105. 6Y-1341 [2] SPRING  
106. 121-7403 [1] FORK-SHIFT  
107. 121-7389 [1] ROD AS-GEARSHIFT (FIRST, SECOND)  
108. 121-7390 [1] ROD AS-GEARSHIFT  
109. 7T-3249 [2] SCREW (3/8-24X0.75-IN)  
110. 123-8907 [2] CONE-BEARING  
111. 123-8908 [2] CUP-TAPERED ROLLER  
112. 7T-3109 [1] PIN  
113. 121-7404 [1] FORK-SHIFT  
114. 127-3017 [1] SEAT AS  
115. 6V-5100 [1] SEAL-O-RING  
116. 3S-2093 [1] STRAP-CABLE  
117. 1U-8846 B [1] SEALANT-GASKET  
118. 123-2919 M [2] NUT (M11X1-THD)  
119. 122-1876 [1] TUBE  
120. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
121. 123-2918 [2] SLEEVE  
122. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
123. 121-7399 B SHIM (0.05-MM THK)  
124. 121-7400 B SHIM (0.08-MM THK)  
125. 121-7401 B SHIM (0.18-MM THK)  
126. 121-7402 B SHIM (0.6-MM THK)  
127. 121-1252 [1] HOUSING  
128. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
129. 121-4036 Y [1] VALVE GP-SOLENOID  
130. 142-1468 Y [1] VALVE GP-SOLENOID  
131. 1R-0772 [1] FILTER ELEMENT AS-OIL (HYDRAULIC)  
132. 3G-6927 [1] ADAPTER  
133. 7T-3253 [2] DOWEL  
134. 8T-2193 [2] SEAL-LIP TYPE  
135. 7T-2651 [1] STRAINER-SUCTION (TRANSMISSION)  
136. 4F-7952 [1] SEAL-O-RING  
137. 9W-5460 [1] RING  
138. 106-9861 [1] PLATE AS-COVER  
139. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
140. 7T-3251 [1] BREATHER (TRANSMISSION)  
141. 121-7391 [1] LEVER  
142. 120-9762 [4] SEAL-O-RING  
143. 7T-3111 [1] COVER  
144. 6K-0806 [1] STRAP-CABLE  
145. 1H-9721 [1] PLUG-EXPANSION  
146. 122-6785 [1] PLUG AS  
147. 7T-3119 [1] HOUSING  
148. 6Y-2035 [1] GASKET  
149. 6V-7731 M [2] BOLT (M10X1.5X70-MM)  
150. 121-0709 [1] SPRING  
151. 3D-2824 [1] SEAL-O-RING  
152. 6B-8208 [1] BALL  
153. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30010232
 

111-7814: TRANSMISSION GP-DIRECT DRIVE

111-7814 TRANSMISSION GP-DIRECT DRIVE
S/N 1TR1550-2096; 2DR3250-3741
PART OF 107-3762 TRANSMISSION AR-DIRECT DRIVE
Type 3
AN ATTACHMENT
i01346583 SEBP3001
1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-5748 M [7] BOLT (M8X1.25X55-MM)  
2. 121-7396 [1] VALVE GP-RELIEF (TORQUE CONVERTER)  
2A. 6V-4589 [1] SEAL-O-RING  
2B. 8L-2746 [1] SEAL-O-RING  
3. 121-7405 [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
3A. 7X-4744 [1] SEAL-O-RING  
3B. 6V-9178 [1] SEAL-O-RING  
3C. 106-9586 [1] SEAL-O-RING  
4. 122-3652 [2] PLUG  
5. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
6. 175-0054 [1] SEAL-O-RING  
7. 174-9711 [1] GASKET  
8. 120-9590 [1] CASE AS  
9. 156-9275 [1] CASE-REAR TRANSMISSION  
10. 9S-4191 [11] PLUG (9/16-18-THD)  
11. 3J-1907 [12] SEAL-O-RING  
12. 6V-8335 M [14] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
13. 7T-3022 [2] SLEEVE  
14. 123-8906 [3] CUP-TAPERED ROLLER  
15. 123-8905 [3] CONE-BEARING  
16. 9U-8886 [4] RING-SEAL  
17. 7T-3021 [2] SYNCHRONIZER GP  
18. 121-0490 [1] RING-RETAINING  
19. 121-0630 [1] RETAINER  
20. 121-0697 [1] WASHER-THRUST (45X65X5-MM THK)  
21. 172-6050 [2] BEARING-SPECIAL  
22. 095-0927 [1] RING-RETAINING  
23. 121-0714 [1] PISTON  
24. 178-9566 [1] SPRING-PISTON  
25. 121-0885 [1] RETAINER  
26. 6T-9196 [1] SEAL  
27. 6T-9194 [9] PLATE  
28. 6Y-7957 [8] DISC-FRICTION  
29. 121-0900 [1] SHAFT AS-OUTPUT (FRONT)  
30. 121-0904 [1] GEAR AS (36-TEETH)  
31. 123-8912 [2] BEARING-ROLLER  
32. 122-1877 [1] WASHER-THRUST (40X65X4-MM THK)  
33. 121-1223 [1] GEAR (35-TEETH)  
34. 121-1251 [1] GEAR (28-TEETH)  
35. 117-4650 [1] GEAR (37-TEETH)  
36. 6T-9160 [1] GEAR (43-TEETH)  
37. 121-1253 [1] GEAR (37-TEETH)  
38. 6V-8500 [2] BEARING  
39. 7T-3017 [1] SPACER (52.5X59X9.6-MM THK)  
40. 7T-3018 [1] SLEEVE  
41. 6Y-2326 [1] RING  
42. 122-1878 [1] RING-SEAL  
43. 122-1879 [1] SPACER (58X67.5X2-MM THK)  
44. 104-3288 B SHIM (0.05-MM THK)  
45. 121-2059 B SHIM (0.08-MM THK)  
46. 121-2060 B SHIM (0.18-MM THK)  
47. 121-2061 B SHIM (0.6-MM THK)  
48. 121-2062 [1] WASHER-THRUST (35X55X4-MM THK)  
49. 7T-3034 [1] SPACER (56.9X64.5X1.98-MM)  
50. 6T-9144 B SHIM (0.051-MM THK)  
51. 6T-9147 B SHIM (0.076-MM THK)  
52. 6T-9146 B SHIM (0.127-MM THK)  
53. 6T-9145 B SHIM (0.178-MM THK)  
54. 6T-9143 B SHIM (0.381-MM THK)  
55. 6T-9142 B SHIM (0.508-MM THK)  
56. 005-0469 [2] CUP-BEARING  
57. 005-0471 [2] CONE-BEARING  
58. 121-2063 [1] SHAFT-OUTPUT (REAR)  
59. 123-8910 [1] CUP-TAPERED ROLLER  
60. 123-8909 [1] CONE-BEARING  
61. 7T-2646 B [2] SPACER (66X79.5X2.02-MM THK)  
62. 6T-9166 B [2] SHIM (0.051-MM THK)  
63. 6T-9165 B [2] SHIM (0.076-MM THK)  
64. 6T-9164 B [2] SHIM (0.178-MM THK)  
65. 6T-9163 B [2] SHIM (0.599-MM THK)  
66. 7T-3051 [1] PLUG  
67. 8T-1580 [1] CUP-BEARING  
68. 8T-1581 [1] BEARING-TAPERED ROLLER  
69. 6Y-2737 [1] CUP-BEARING  
70. 6Y-2736 [1] CONE-BEARING  
71. 121-2500 [3] WASHER-THRUST (50X70X4-MM THK)  
72. 121-2511 [1] SHAFT  
73. 121-2537 [1] SHAFT-REVERSE  
74. 121-2545 [1] SHAFT AS-INPUT  
  123-0714 [1] BEARING  
  123-2920 [3] PLUG  
75. 121-2603 [1] GEAR (24-TEETH)  
76. 121-2604 [1] GEAR (27-TEETH)  
77. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
78. 122-1882 [2] PLATE-END  
79. 122-1881 [12] PLATE-CLUTCH  
80. 122-1880 [12] DISC  
81. 6V-8757 [3] RING-RETAINING  
82. 121-2801 [2] RETAINER  
83. 121-2802 [2] SPRING  
84. 121-2803 [2] PISTON  
85. 122-1875 [2] SEAL  
86. 122-1874 [2] SEAL-O-RING  
87. 122-6783 [2] RING-SEAL  
88. 6V-4368 [2] SEAL-O-RING  
89. 121-9875 M [4] BOLT (M10X1.5X55-MM)  
90. 122-6787 [2] YOKE AS  
    (EACH INCLUDES)
  [1] GUARD  
91. 122-1883 [1] SPACER (38X45X5-MM THK)  
92. 122-1885 [2] SPACER (51X55X4-MM THK)  
93. 123-8913 [4] BEARING-ROLLER  
94. 172-5317 [2] BEARING-SPECIAL  
95. 122-3649 [2] RING-RETAINING  
96. 7T-3195 [2] WASHER (12.3X47X6.35-MM THK)  
97. 123-2920 [1] PLUG  
98. 6V-8097 M [2] BOLT (M12X1.75X30-MM)  
99. 5P-8066 [2] SEAL-O-RING  
100. 122-1884 [1] SPACER (45X49X8-MM THK)  
101. 121-7385 [1] PUMP GP-TRANSMISSION (DIRECT DRIVE)  
102. 7X-4741 [1] SEAL  
103. 122-1886 [1] RING-SEAL  
104. 014-5645 [3] BALL  
105. 6Y-1341 [2] SPRING  
106. 121-7403 [1] FORK-SHIFT  
107. 121-7389 [1] ROD AS-GEARSHIFT (FIRST, SECOND)  
108. 121-7390 [1] ROD AS-GEARSHIFT  
109. 7T-3249 [2] SCREW (3/8-24X0.75-IN)  
110. 123-8907 [2] CONE-BEARING  
111. 123-8908 [2] CUP-TAPERED ROLLER  
112. 7T-3109 [1] PIN  
113. 121-7404 [1] FORK-SHIFT  
114. 127-3017 [1] SEAT AS  
115. 6V-5100 [1] SEAL-O-RING  
116. 3S-2093 [1] STRAP-CABLE  
117. 1U-8846 B [1] SEALANT-GASKET  
118. 123-2919 M [2] NUT (M11X1-THD)  
119. 122-1876 [1] TUBE  
120. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
121. 123-2918 [2] SLEEVE  
122. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
123. 121-7399 B SHIM (0.05-MM THK)  
124. 121-7400 B SHIM (0.08-MM THK)  
125. 121-7401 B SHIM (0.18-MM THK)  
126. 121-7402 B SHIM (0.6-MM THK)  
127. 121-1252 [1] HOUSING  
128. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
129. 121-4036 Y [1] VALVE GP-SOLENOID  
130. 142-1468 Y [1] VALVE GP-SOLENOID  
131. 119-4740 [1] FILTER-OIL (STANDARD EFFICIENCY)  
132. 3G-6927 [1] ADAPTER  
133. 7T-3253 [2] DOWEL  
134. 8T-2193 [2] SEAL-LIP TYPE  
135. 7T-2651 [1] STRAINER-SUCTION (TRANSMISSION)  
136. 4F-7952 [1] SEAL-O-RING  
137. 9W-5460 [1] RING  
138. 106-9861 [1] PLATE AS-COVER  
139. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
140. 7T-3251 [1] BREATHER (TRANSMISSION)  
141. 121-7391 [1] LEVER  
142. 120-9762 [4] SEAL-O-RING  
143. 7T-3111 [1] COVER  
144. 6K-0806 [1] STRAP-CABLE  
145. 1H-9721 [1] PLUG-EXPANSION  
146. 122-6785 [1] PLUG AS  
147. 7T-3119 [1] HOUSING  
148. 6Y-2035 [1] GASKET  
149. 6V-7731 M [2] BOLT (M10X1.5X70-MM)  
150. 121-0709 [1] SPRING  
151. 3D-2824 [1] SEAL-O-RING  
152. 6B-8208 [1] BALL  
153. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30010233
 

111-7814: TRANSMISSION GP-DIRECT DRIVE

111-7814 TRANSMISSION GP-DIRECT DRIVE
S/N 1TR1550-2096; 2DR3250-3741
PART OF 107-3762 TRANSMISSION AR-DIRECT DRIVE
Type 4
AN ATTACHMENT
i01346588 SEBP3001
1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1117814 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-5748 M [7] BOLT (M8X1.25X55-MM)  
2. 121-7396 [1] VALVE GP-RELIEF (TORQUE CONVERTER)  
2A. 6V-4589 [1] SEAL-O-RING  
2B. 8L-2746 [1] SEAL-O-RING  
3. 121-7405 [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
3A. 7X-4744 [1] SEAL-O-RING  
3B. 6V-9178 [1] SEAL-O-RING  
3C. 106-9586 [1] SEAL-O-RING  
4. 122-3652 [2] PLUG  
5. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
6. 175-0054 [1] SEAL-O-RING  
7. 174-9711 [1] GASKET  
8. 120-9590 [1] CASE AS  
9. 156-9275 [1] CASE-REAR TRANSMISSION  
10. 9S-4191 [11] PLUG (9/16-18-THD)  
11. 3J-1907 [12] SEAL-O-RING  
12. 6V-8335 M [14] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
13. 7T-3022 [2] SLEEVE  
14. 123-8906 [3] CUP-TAPERED ROLLER  
15. 123-8905 [3] CONE-BEARING  
16. 9U-8886 [4] RING-SEAL  
17. 7T-3021 [2] SYNCHRONIZER GP  
18. 161-3249 [1] RING-RETAINING  
19. 121-0630 [1] RETAINER  
20. 121-0697 [1] WASHER-THRUST (45X65X5-MM THK)  
21. 172-6050 [2] BEARING-SPECIAL  
22. 095-0927 [1] RING-RETAINING  
23. 121-0714 [1] PISTON  
24. 178-9566 [1] SPRING-PISTON  
25. 121-0885 [1] RETAINER  
26. 6T-9196 [1] SEAL  
27. 6T-9194 [9] PLATE  
28. 6Y-7957 [8] DISC-FRICTION  
29. 190-9767 [1] SHAFT AS (OUTPUT)  
30. 121-0904 [1] GEAR AS (36-TEETH)  
31. 123-8912 [2] BEARING-ROLLER  
32. 122-1877 [1] WASHER-THRUST (40X65X4-MM THK)  
33. 121-1223 [1] GEAR (35-TEETH)  
34. 121-1251 [1] GEAR (28-TEETH)  
35. 117-4650 [1] GEAR (37-TEETH)  
36. 6T-9160 [1] GEAR (43-TEETH)  
37. 121-1253 [1] GEAR (37-TEETH)  
38. 6V-8500 [2] BEARING  
39. 7T-3017 [1] SPACER (52.5X59X9.6-MM THK)  
40. 7T-3018 [1] SLEEVE  
41. 6Y-2326 [1] RING  
42. 122-1878 [1] RING-SEAL  
43. 122-1879 [1] SPACER (58X67.5X2-MM THK)  
44. 104-3288 B SHIM (0.05-MM THK)  
45. 121-2059 B SHIM (0.08-MM THK)  
46. 121-2060 B SHIM (0.18-MM THK)  
47. 121-2061 B SHIM (0.6-MM THK)  
48. 121-2062 [1] WASHER-THRUST (35X55X4-MM THK)  
49. 7T-3034 [1] SPACER (56.9X64.5X1.98-MM)  
50. 6T-9144 B SHIM (0.051-MM THK)  
51. 6T-9147 B SHIM (0.076-MM THK)  
52. 6T-9146 B SHIM (0.127-MM THK)  
53. 6T-9145 B SHIM (0.178-MM THK)  
54. 6T-9143 B SHIM (0.381-MM THK)  
55. 6T-9142 B SHIM (0.508-MM THK)  
56. 005-0469 [2] CUP-BEARING  
57. 005-0471 [2] CONE-BEARING  
58. 121-2063 [1] SHAFT-OUTPUT (REAR)  
59. 123-8910 [1] CUP-TAPERED ROLLER  
60. 123-8909 [1] CONE-BEARING  
61. 7T-2646 B [2] SPACER (66X79.5X2.02-MM THK)  
62. 6T-9166 B [2] SHIM (0.051-MM THK)  
63. 6T-9165 B [2] SHIM (0.076-MM THK)  
64. 6T-9164 B [2] SHIM (0.178-MM THK)  
65. 6T-9163 B [2] SHIM (0.599-MM THK)  
66. 7T-3051 [1] PLUG  
67. 8T-1580 [1] CUP-BEARING  
68. 8T-1581 [1] BEARING-TAPERED ROLLER  
69. 6Y-2737 [1] CUP-BEARING  
70. 6Y-2736 [1] CONE-BEARING  
71. 121-2500 [3] WASHER-THRUST (50X70X4-MM THK)  
72. 121-2511 [1] SHAFT  
73. 121-2537 [1] SHAFT-REVERSE  
74. 121-2545 [1] SHAFT AS-INPUT  
  123-0714 [1] BEARING  
  123-2920 [3] PLUG  
75. 121-2603 [1] GEAR (24-TEETH)  
76. 121-2604 [1] GEAR (27-TEETH)  
77. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
78. 122-1882 [2] PLATE-END  
79. 122-1881 [12] PLATE-CLUTCH  
80. 122-1880 [12] DISC  
81. 6V-8757 [3] RING-RETAINING  
82. 121-2801 [2] RETAINER  
83. 121-2802 [2] SPRING  
84. 121-2803 [2] PISTON  
85. 122-1875 [2] SEAL  
86. 122-1874 [2] SEAL-O-RING  
87. 122-6783 [2] RING-SEAL  
88. 6V-4368 [2] SEAL-O-RING  
89. 121-9875 M [4] BOLT (M10X1.5X55-MM)  
90. 122-6787 [2] YOKE AS  
    (EACH INCLUDES)
  [1] GUARD  
91. 122-1883 [1] SPACER (38X45X5-MM THK)  
92. 122-1885 [2] SPACER (51X55X4-MM THK)  
93. 123-8913 [4] BEARING-ROLLER  
94. 172-5317 [2] BEARING-SPECIAL  
95. 122-3649 [2] RING-RETAINING  
96. 7T-3195 [2] WASHER (12.3X47X6.35-MM THK)  
97. 123-2920 [1] PLUG  
98. 6V-8097 M [2] BOLT (M12X1.75X30-MM)  
99. 5P-8066 [2] SEAL-O-RING  
100. 122-1884 [1] SPACER (45X49X8-MM THK)  
101. 121-7385 [1] PUMP GP-TRANSMISSION (DIRECT DRIVE)  
102. 7X-4741 [1] SEAL  
103. 122-1886 [1] RING-SEAL  
104. 014-5645 [3] BALL  
105. 6Y-1341 [2] SPRING  
106. 121-7403 [1] FORK-SHIFT  
107. 121-7389 [1] ROD AS-GEARSHIFT (FIRST, SECOND)  
108. 121-7390 [1] ROD AS-GEARSHIFT  
109. 7T-3249 [2] SCREW (3/8-24X0.75-IN)  
110. 123-8907 [2] CONE-BEARING  
111. 123-8908 [2] CUP-TAPERED ROLLER  
112. 7T-3109 [1] PIN  
113. 121-7404 [1] FORK-SHIFT  
114. 127-3017 [1] SEAT AS  
115. 6V-5100 [1] SEAL-O-RING  
116. 3S-2093 [1] STRAP-CABLE  
117. 1U-8846 B [1] SEALANT-GASKET  
118. 123-2919 M [2] NUT (M11X1-THD)  
119. 122-1876 [1] TUBE  
120. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
121. 123-2918 [2] SLEEVE  
122. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
123. 121-7399 B SHIM (0.05-MM THK)  
124. 121-7400 B SHIM (0.08-MM THK)  
125. 121-7401 B SHIM (0.18-MM THK)  
126. 121-7402 B SHIM (0.6-MM THK)  
127. 121-1252 [1] HOUSING  
128. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
129. 121-4036 Y [1] VALVE GP-SOLENOID  
130. 142-1468 Y [1] VALVE GP-SOLENOID  
131. 119-4740 [1] FILTER-OIL (STANDARD EFFICIENCY)  
132. 3G-6927 [1] ADAPTER  
133. 7T-3253 [2] DOWEL  
134. 8T-2193 [2] SEAL-LIP TYPE  
135. 7T-2651 [1] STRAINER-SUCTION (TRANSMISSION)  
136. 4F-7952 [1] SEAL-O-RING  
137. 9W-5460 [1] RING  
138. 106-9861 [1] PLATE AS-COVER  
139. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
140. 7T-3251 [1] BREATHER (TRANSMISSION)  
141. 121-7391 [1] LEVER  
142. 120-9762 [4] SEAL-O-RING  
143. 7T-3111 [1] COVER  
144. 6K-0806 [1] STRAP-CABLE  
145. 1H-9721 [1] PLUG-EXPANSION  
146. 122-6785 [1] PLUG AS  
147. 7T-3119 [1] HOUSING  
148. 6Y-2035 [1] GASKET  
149. 6V-7731 M [2] BOLT (M10X1.5X70-MM)  
150. 121-0709 [1] SPRING  
151. 3D-2824 [1] SEAL-O-RING  
152. 6B-8208 [1] BALL  
153. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30010234
 

192-0844: TRANSMISSION GP-DIRECT DRIVE

192-0844 TRANSMISSION GP-DIRECT DRIVE
S/N 1TR1550-2096; 2DR3250-3741
ALL WHEEL
PART OF 202-7431 TRANSMISSION & MOUNTING GP
AN ATTACHMENT
i01410603 SEBP3001
1920844 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1920844 TRANSMISSION GP-DIRECT DRIVE Parts scheme 1920844 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 174-9711 [1] GASKET  
2. 175-0054 [1] SEAL-O-RING  
3. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
4. 122-3652 [2] PLUG  
5. 121-7405 [1] VALVE GP-RELIEF (PUMP PRESSURE)  
  6V-9178 [1] SEAL-O-RING  
  7X-4744 [1] SEAL-O-RING  
  106-9586 [1] SEAL-O-RING  
6. 121-7396 [1] VALVE GP-RELIEF (TORQUE CONVERTER INLET)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
7. 8C-5748 M [7] BOLT (M8X1.25X55-MM)  
8. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
9. 192-0845 [1] CASE-FRONT TRANSMISSION  
10. 156-9275 [1] CASE-REAR TRANSMISSION  
11. 9S-4191 [10] PLUG (9/16-18-THD)  
12. 3J-1907 [11] SEAL-O-RING  
13. 6V-8335 M [14] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
14. 7T-3022 [2] SLEEVE  
15. 123-8906 [3] CUP-TAPERED ROLLER  
16. 123-8905 [3] CONE-BEARING  
17. 9U-8886 [4] RING-SEAL  
18. 7T-3021 [2] SYNCHRONIZER GP  
19. 161-3249 [1] RING-RETAINING  
20. 121-0630 [1] RETAINER  
21. 121-0697 [1] WASHER-THRUST (45X65X5-MM THK)  
22. 172-6050 [2] BEARING-SPECIAL  
23. 095-0927 [1] RING-RETAINING  
24. 121-0714 [1] PISTON  
25. 178-9566 [1] SPRING-PISTON  
26. 121-0885 [1] RETAINER  
27. 6T-9196 [1] SEAL  
28. 6T-9194 [9] PLATE  
29. 6Y-7957 [8] DISC-FRICTION  
30. 190-9767 [1] SHAFT AS (OUTPUT)  
31. 121-0904 [1] GEAR AS (36-TEETH)  
32. 123-8912 [2] BEARING-ROLLER  
33. 122-1877 [1] WASHER-THRUST (40X65X4-MM THK)  
34. 211-6758 [1] GEAR (19-TEETH)  
35. 121-1251 [1] GEAR (28-TEETH)  
36. 117-4650 [1] GEAR (37-TEETH)  
37. 6T-9160 [1] GEAR (43-TEETH)  
38. 121-1253 [1] GEAR (37-TEETH)  
39. 6V-8500 [2] BEARING  
40. 7T-3017 [1] SPACER (52.5X59X9.6-MM THK)  
41. 7T-3018 [1] SLEEVE  
42. 6Y-2326 [1] RING  
43. 122-1878 [1] RING-SEAL  
44. 122-1879 [1] SPACER (58X67.5X2-MM THK)  
  104-3288 B [1] SHIM (0.05-MM THK)  
  121-2059 B [1] SHIM (0.08-MM THK)  
  121-2060 B [1] SHIM (0.18-MM THK)  
  121-2061 B [1] SHIM (0.6-MM THK)  
45. 6V-7731 M [2] BOLT (M10X1.5X70-MM)  
46. 6Y-2035 [1] GASKET  
47. 7T-3119 [1] HOUSING  
48. 122-6785 [1] PLUG AS  
49. 121-2062 [1] WASHER-THRUST (35X55X4-MM THK)  
50. 7T-3034 [1] SPACER (56.9X64.5X1.98-MM)  
  6T-9144 B [1] SHIM (0.051-MM THK)  
  6T-9147 B [1] SHIM (0.076-MM THK)  
  6T-9146 B [1] SHIM (0.127-MM THK)  
  6T-9145 B [1] SHIM (0.178-MM THK)  
  6T-9143 B [1] SHIM (0.381-MM THK)  
  6T-9142 B [1] SHIM (0.508-MM THK)  
51. 1H-9721 [1] PLUG-EXPANSION  
52. 6K-0806 [1] STRAP-CABLE  
53. 7T-3111 [1] COVER  
54. 120-9762 [4] SEAL-O-RING  
55. 121-7391 [1] LEVER  
56. 7T-3251 [1] BREATHER (TRANSMISSION)  
57. 005-0469 [2] CUP-BEARING  
58. 005-0471 [2] CONE-BEARING  
59. 211-6759 [1] SHAFT (OUTPUT)  
60. 123-8910 [1] CUP-TAPERED ROLLER  
61. 123-8909 [1] CONE-BEARING  
62. 7T-2646 [2] SPACER (66X79.5X2.02-MM THK)  
  6T-9166 B [2] SHIM (0.051-MM THK)  
  6T-9165 B [2] SHIM (0.076-MM THK)  
  6T-9164 B [2] SHIM (0.178-MM THK)  
  6T-9163 B [2] SHIM (0.599-MM THK)  
63. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
64. 106-9861 [1] PLATE AS-COVER  
65. 9W-5460 [1] RING  
66. 4F-7952 [1] SEAL-O-RING  
67. 7T-3051 [1] PLUG  
68. 8T-1580 [1] CUP-BEARING  
69. 8T-1581 [1] BEARING-TAPERED ROLLER  
70. 6Y-2737 [1] CUP-BEARING  
71. 6Y-2736 [1] CONE-BEARING  
72. 121-2500 [3] WASHER-THRUST (50X70X4-MM THK)  
73. 121-2511 [1] SHAFT  
74. 121-2537 [1] SHAFT-REVERSE  
75. 121-2545 [1] SHAFT AS-INPUT  
  123-0714 [1] BEARING  
  123-2920 [3] PLUG  
76. 121-2603 [1] GEAR (24-TEETH)  
77. 121-2604 [1] GEAR (27-TEETH)  
78. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
79. 122-1882 [2] PLATE-END  
80. 122-1881 [12] PLATE-CLUTCH  
81. 122-1880 [12] DISC  
82. 6V-8757 [3] RING-RETAINING  
83. 121-2801 [2] RETAINER  
84. 121-2802 [2] SPRING  
85. 121-2803 [2] PISTON  
86. 122-1875 [2] SEAL  
87. 122-1874 [2] SEAL-O-RING  
88. 122-6783 [2] RING-SEAL  
89. 6V-4368 [2] SEAL-O-RING  
90. 121-9875 M [4] BOLT (M10X1.5X55-MM)  
91. 122-6787 [2] YOKE AS  
    (EACH INCLUDES)
  [1] GUARD  
92. 122-1883 [1] SPACER (38X45X5-MM THK)  
93. 122-1885 [2] SPACER (51X55X4-MM THK)  
94. 123-8913 [4] BEARING-ROLLER  
95. 172-5317 [2] BEARING-SPECIAL  
96. 122-3649 [2] RING-RETAINING  
97. 7T-3195 [2] WASHER (12.3X47X6.35-MM THK)  
98. 123-2920 [1] PLUG  
99. 6V-8097 M [2] BOLT (M12X1.75X30-MM)  
100. 5P-8066 [2] SEAL-O-RING  
101. 122-1884 [1] SPACER (45X49X8-MM THK)  
102. 121-7385 [1] PUMP GP-TRANSMISSION (DIRECT DRIVE)  
  124-6612 [1] SEAL-LIP TYPE  
103. 7X-4741 [1] SEAL  
104. 122-1886 [1] RING-SEAL  
105. 014-5645 [3] BALL  
106. 6Y-1341 [2] SPRING  
107. 121-7403 [1] FORK-SHIFT  
108. 121-7389 [1] ROD AS-GEARSHIFT (FIRST, SECOND)  
109. 121-7390 [1] ROD AS-GEARSHIFT  
110. 7T-3249 [2] SCREW (3/8-24X0.75-IN)  
111. 123-8907 [2] CONE-BEARING  
112. 123-8908 [2] CUP-TAPERED ROLLER  
113. 7T-3109 [1] PIN  
114. 121-7404 [1] FORK-SHIFT  
115. 127-3017 [1] SEAT AS  
116. 6V-5100 [1] SEAL-O-RING  
117. 3S-2093 [1] STRAP-CABLE  
118. 7T-2651 [1] STRAINER-SUCTION (TRANSMISSION)  
119. 123-2919 M [2] NUT (M11X1-THD)  
120. 122-1876 [1] TUBE  
121. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
122. 123-2918 [2] SLEEVE  
123. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
  121-7399 B [1] SHIM (0.05-MM THK)  
  121-7400 B [1] SHIM (0.08-MM THK)  
  121-7401 B [1] SHIM (0.18-MM THK)  
  121-7402 B [1] SHIM (0.6-MM THK)  
124. 8T-2193 [2] SEAL-LIP TYPE  
125. 7T-3253 [2] DOWEL  
126. 3G-6927 [1] ADAPTER  
127. 142-1468 Y [1] VALVE GP-SOLENOID  
128. 121-4036 Y [1] VALVE GP-SOLENOID  
129. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30010235
 

147-0204: TRANSMISSION GP-POWER SHIFT

147-0204 TRANSMISSION GP-POWER SHIFT
S/N 1TR1550-2096; 2DR3250-3741
PART OF 142-4437 TRANSMISSION AR-POWER SHIFT
Type 1
AN ATTACHMENT
i00735907 SEBP3001
1470204 TRANSMISSION GP-POWER SHIFT Parts scheme 1470204 TRANSMISSION GP-POWER SHIFT Parts scheme 1470204 TRANSMISSION GP-POWER SHIFT Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 147-0245 [1] CASE AS-FRONT  
  9W-0717 [4] PLUG  
  147-0268 [4] PLUG  
2. 147-0218 [1] TUBE AS  
3. 148-8988 Y [2] VALVE GP-SOLENOID  
4. 8C-8545 M [2] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
5. 120-9762 [5] SEAL-O-RING  
6. 148-8986 Y [1] VALVE GP-SOLENOID  
7. 173-0332 [1] SHAFT AS  
  163-9091 [1] PLUG  
8. 147-0253 [1] CASE AS-REAR  
  9W-0717 [11] PLUG  
9. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
10. 121-7402 B [1] SHIM (0.6-MM THK)  
11. 121-7401 B [1] SHIM (0.18-MM THK)  
12. 121-7400 B [1] SHIM (0.08-MM THK)  
13. 121-7399 B [1] SHIM (0.05-MM THK)  
14. 7T-2646 [2] SPACER (66X79.5X2.02-MM THK)  
15. 6T-9166 B [2] SHIM (0.051-MM THK)  
16. 6T-9165 B [2] SHIM (0.076-MM THK)  
17. 6T-9164 B [2] SHIM (0.178-MM THK)  
18. 7W-3556 [12] WASHER (14.27X20.57X1.5-MM THK)  
19. 147-0234 [6] BOLT (9/16-18X0.83-IN)  
20. 147-0201 [1] TUBE AS  
21. 5P-8066 [2] SEAL-O-RING  
22. 6V-8097 M [3] BOLT (M12X1.75X30-MM)  
23. 7T-3195 [3] WASHER (12.3X47X6.35-MM THK)  
24. 122-6787 [2] YOKE AS  
    (EACH INCLUDES)
  [1] GUARD  
25. 8T-2193 [2] SEAL-LIP TYPE  
26. 121-7385 [1] PUMP GP-TRANSMISSION (DIRECT DRIVE)  
  124-6612 [1] SEAL-LIP TYPE  
27. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
28. 8C-5748 M [4] BOLT (M8X1.25X55-MM)  
29. 7X-4741 [1] SEAL  
30. 9S-4185 [3] PLUG (3/4-16-THD)  
31. 3K-0360 [3] SEAL-O-RING  
32. 123-8906 [5] CUP-TAPERED ROLLER  
33. 123-8905 [5] CONE-BEARING  
34. 121-0694 [2] WASHER-THRUST (40X70X4-MM THK)  
35. 172-5317 [6] BEARING-SPECIAL  
36. 8E-5707 [7] PLATE-END  
37. 6T-9194 [45] PLATE  
38. 6Y-7929 [37] DISC-FRICTION  
39. 9U-8875 [6] RING-RETAINING  
40. 121-2500 [4] WASHER-THRUST (50X70X4-MM THK)  
41. 147-0202 [2] GEAR (45/24-TEETH)  
42. 7T-6655 [4] BEARING  
43. 147-0259 [2] SPACER (51.1X54.9X18.7-MM THK)  
44. 147-0238 [5] SPRING AS  
45. 6V-5100 [5] SEAL-O-RING  
46. 147-0228 [4] PISTON-CLUTCH  
47. 6T-9196 [7] SEAL  
48. 6Y-1192 [7] RING-SEAL  
49. 122-1879 [2] SPACER (58X67.5X2-MM THK)  
50. 104-3288 B [2] SHIM (0.05-MM THK)  
51. 121-2059 B [2] SHIM (0.08-MM THK)  
52. 121-2060 B [2] SHIM (0.18-MM THK)  
53. 121-2061 B [2] SHIM (0.6-MM THK)  
54. 147-0232 [4] PLUG  
55. 7X-4744 [1] SEAL-O-RING  
56. 147-0255 [1] HOUSING-SPRING  
57. 147-0206 [1] SPRING  
58. 2H-3698 [1] BALL  
59. 147-0256 [1] SHAFT AS-REVERSE  
  9W-0717 [1] PLUG  
  147-0270 [1] ORIFICE  
60. 147-0226 [1] TUBE AS  
61. 6T-9163 B [2] SHIM (0.599-MM THK)  
62. 6V-8757 [6] RING-RETAINING  
63. 9U-8886 [4] RING-SEAL  
64. 178-9566 [2] SPRING-PISTON  
66. 147-0264 [1] GEAR (45/28-TEETH)  
67. 147-0260 [1] RETAINER-SPRING (16.36MM ID)  
68. 161-3249 [1] RING-RETAINING  
69. 150-7732 [2] SEAL-O-RING  
70. 8T-0271 M [2] BOLT-SOCKET HEAD (M10X1.5X35-MM)  
71. 9X-6615 M [12] BOLT (M5X0.8X30-MM)  
72. 123-8913 [2] BEARING-ROLLER  
73. 147-0224 [1] GEAR (45/32-TEETH)  
74. 147-0211 [1] ELBOW AS  
  3G-6927 [1] ADAPTER  
75. 4F-7952 [1] SEAL-O-RING  
76. 7T-2651 [1] STRAINER-SUCTION (TRANSMISSION)  
77. 9W-5460 [1] RING  
78. 147-0209 Y [1] VALVE GP-RELIEF (FORWARD HIGH)  
79. 121-7396 [1] VALVE GP-RELIEF (TORQUE CONVERTER INLET)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
80. 6T-9202 [2] PLUG  
81. 121-4036 Y [2] VALVE GP-SOLENOID  
82. 106-9861 [1] PLATE AS-COVER  
83. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
84. 147-0236 [1] TUBE AS  
85. 7T-3251 [1] BREATHER (TRANSMISSION)  
86. 122-1886 [1] RING-SEAL  
87. 123-8907 [3] CONE-BEARING  
88. 123-8908 [3] CUP-TAPERED ROLLER  
89. 147-0212 [1] GEAR (42-TEETH)  
90. 147-0216 [1] GEAR (38-TEETH)  
91. 147-0203 [3] WASHER-THRUST (45.3X65X5-MM THK)  
92. 147-0258 [1] SPACER (46X50X16-MM THK)  
93. 147-0215 [1] GEAR (45/19-TEETH)  
94. 172-6050 [6] BEARING-SPECIAL  
95. 122-1877 [3] WASHER-THRUST (40X65X4-MM THK)  
96. 6V-8335 M [16] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
97. 123-8912 [6] BEARING-ROLLER  
98. 147-0248 [1] SPACER (56.2X60X15.8-MM THK)  
99. 8T-1581 [1] BEARING-TAPERED ROLLER  
100. 147-0205 [2] WASHER (55X78X5-MM THK)  
101. 095-0928 [1] RING-RETAINING  
102. 123-8910 [1] CUP-TAPERED ROLLER  
103. 123-8909 [1] CONE-BEARING  
104. 157-2090 [1] GEAR (38-TEETH)  
105. 172-6743 [2] BEARING-SPECIAL  
106. 147-0242 [1] GEAR (48-TEETH)  
107. 150-3757 [2] BEARING  
108. 009-2062 [2] SEAL-O-RING  
109. 157-2088 [2] PISTON AS  
110. 147-0261 [1] SHAFT AS-OUTPUT (REAR)  
  9W-0717 [2] PLUG  
111. 095-0927 [1] RING-RETAINING  
112. 8T-1580 [1] CUP-BEARING  
113. 7T-3253 [2] DOWEL  
114. 147-0257 [1] SHAFT AS-INPUT  
  123-2920 [3] PLUG  
115. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
116. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
117. 3J-1907 [14] SEAL-O-RING  
118. 1V-6341 [1] SEAL  
119. 6V-2455 [1] SENSOR GP-SPEED  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 SLEEVE (14CM)  
120. 6Y-7957 [8] DISC-FRICTION  
121. 122-1878 [1] RING-SEAL  
122. 122-1884 [1] SPACER (45X49X8-MM THK)  
123. 147-0207 [1] SHAFT AS-OUTPUT (FRONT)  
124. 147-0210 [1] GEAR (45/36-TEETH)  
125. 147-0227 [1] PISTON-CLUTCH  
126. 119-4740 [1] FILTER-OIL (STANDARD EFFICIENCY)  
127. 147-0266 [2] BOLT (3/4-16X1.417-IN)  
128. 147-0262 [4] WASHER (19.1X24.1X1.5-MM THK)  
129. 9S-4191 [14] PLUG (9/16-18-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30010236
 

147-0204: TRANSMISSION GP-POWER SHIFT

147-0204 TRANSMISSION GP-POWER SHIFT
S/N 1TR1550-2096; 2DR3250-3741
PART OF 142-4437 TRANSMISSION AR-POWER SHIFT
Type 2
AN ATTACHMENT
i01346547 SEBP3001
1470204 TRANSMISSION GP-POWER SHIFT Parts scheme 1470204 TRANSMISSION GP-POWER SHIFT Parts scheme 1470204 TRANSMISSION GP-POWER SHIFT Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-9566 [2] SPRING-PISTON  
2. 8C-5748 M [4] BOLT (M8X1.25X55-MM)  
3. 161-3249 [1] RING-RETAINING  
4. 147-0245 [1] CASE AS-FRONT  
  9W-0717 [4] PLUG  
  147-0268 [4] PLUG  
5. 1R-0772 C [1] FILTER ELEMENT AS-OIL (HYDRAULIC)  
6. 6T-9163 B [2] SHIM (0.599-MM THK)  
7. 147-0218 [1] TUBE AS  
8. 148-8988 Y [2] VALVE GP-SOLENOID (FORWARD HIGH, FORWARD LOW)  
9. 8C-8545 M [2] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
10. 120-9762 [5] SEAL-O-RING  
11. 148-8986 Y [1] VALVE GP-SOLENOID (REVERSE)  
12. 147-0253 [1] CASE AS-REAR  
  9W-0717 [11] PLUG  
13. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
14. 121-7402 B [1] SHIM (0.6-MM THK)  
15. 121-7401 B [1] SHIM (0.18-MM THK)  
16. 121-7400 B [1] SHIM (0.08-MM THK)  
17. 121-7399 B [1] SHIM (0.05-MM THK)  
18. 7T-2646 [2] SPACER (66X79.5X2.02-MM THK)  
19. 6T-9166 B [2] SHIM (0.051-MM THK)  
20. 6T-9165 B [2] SHIM (0.076-MM THK)  
21. 6T-9164 B [2] SHIM (0.178-MM THK)  
22. 122-1878 [1] RING-SEAL  
23. 147-0201 [1] TUBE AS  
24. 7W-3556 [12] WASHER (14.27X20.57X1.5-MM THK)  
25. 147-0234 [6] BOLT (9/16-18X0.83-IN)  
26. 1U-8846 B [1] SEALANT-GASKET  
27. 5P-8066 [2] SEAL-O-RING  
28. 6V-8097 M [3] BOLT (M12X1.75X30-MM)  
29. 7T-3195 [3] WASHER (12.3X47X6.35-MM THK)  
30. 122-6787 [2] YOKE AS  
    (EACH AS INCLUDES)
  [1] GUARD  
31. 8T-2193 [2] SEAL-LIP TYPE  
32. 121-7385 [1] PUMP GP-TRANSMISSION (DIRECT DRIVE)  
  208-8240 [1] SEAL-LIP TYPE  
33. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
34. 173-0332 [1] SHAFT AS  
  163-9091 [1] PLUG  
35. 7X-4741 [1] SEAL  
36. 9S-4185 [3] PLUG (3/4-16-THD)  
37. 3K-0360 [3] SEAL-O-RING  
38. 123-8906 [5] CUP-TAPERED ROLLER  
39. 123-8905 [5] CONE-BEARING  
40. 121-0694 [2] WASHER-THRUST (40X70X4-MM THK)  
41. 172-5317 [6] BEARING-SPECIAL  
42. 123-8913 [2] BEARING-ROLLER  
43. 147-0224 [1] GEAR (45/32-TEETH)  
44. 8E-5707 [7] PLATE-END  
45. 6V-8757 [6] RING-RETAINING  
46. 6T-9194 [45] PLATE  
47. 6Y-7929 [37] DISC-FRICTION  
48. 9U-8875 [6] RING-RETAINING  
49. 121-2500 [4] WASHER-THRUST (50X70X4-MM THK)  
50. 147-0202 [2] GEAR (45/24-TEETH)  
51. 147-0257 [1] SHAFT AS-INPUT  
  123-0714 [1] BEARING  
  123-2920 [3] PLUG  
52. 9U-8886 [4] RING-SEAL  
53. 123-8910 [1] CUP-TAPERED ROLLER  
54. 123-8909 [1] CONE-BEARING  
55. 7T-6655 [4] BEARING  
56. 147-0259 [2] SPACER (51.1X54.9X18.7-MM THK)  
57. 147-0238 [5] SPRING AS  
58. 6V-5100 [5] SEAL-O-RING  
59. 147-0228 [4] PISTON-CLUTCH  
60. 6T-9196 [7] SEAL  
61. 122-1886 [1] RING-SEAL  
62. 123-8907 [3] CONE-BEARING  
63. 123-8908 [3] CUP-TAPERED ROLLER  
64. 147-0212 [1] GEAR (42-TEETH)  
65. 147-0216 [1] GEAR (38-TEETH)  
66. 147-0203 [3] WASHER-THRUST (45.3X65X5-MM THK)  
67. 147-0258 [1] SPACER (46X50X16-MM THK)  
68. 147-0215 [1] GEAR (45/19-TEETH)  
69. 172-6050 [6] BEARING-SPECIAL  
70. 122-1877 [3] WASHER-THRUST (40X65X4-MM THK)  
71. 6Y-1192 [7] RING-SEAL  
72. 123-8912 [6] BEARING-ROLLER  
73. 9S-4191 [14] PLUG (9/16-18-THD)  
74. 147-0264 [1] GEAR (45/28-TEETH)  
75. 147-0260 [1] RETAINER-SPRING  
76. 095-0928 [1] RING-RETAINING  
77. 147-0205 [2] WASHER (55X78X5-MM THK)  
78. 147-0248 [1] SPACER (56.2X60X15.8-MM THK)  
79. 157-2090 [1] GEAR (38-TEETH)  
80. 172-6743 [2] BEARING-SPECIAL  
81. 147-0242 [1] GEAR (48-TEETH)  
82. 150-3757 [2] BEARING  
83. 009-2062 [2] SEAL-O-RING  
84. 157-2088 [2] PISTON AS  
85. 147-0261 [1] SHAFT AS-OUTPUT (REAR)  
  163-9091 [2] PLUG  
86. 095-0927 [1] RING-RETAINING  
87. 122-1884 [1] SPACER (45X49X8-MM THK)  
88. 147-0210 [1] GEAR (45/36-TEETH)  
89. 147-0207 [1] SHAFT AS-OUTPUT (FRONT)  
90. 122-1879 [2] SPACER (58X67.5X2-MM THK)  
91. 104-3288 B [2] SHIM (0.05-MM THK)  
92. 121-2059 B [2] SHIM (0.08-MM THK)  
93. 121-2060 B [2] SHIM (0.18-MM THK)  
94. 121-2061 B [2] SHIM (0.6-MM THK)  
95. 147-0211 [1] ELBOW AS  
  3G-6927 [1] ADAPTER  
96. 6Y-7957 [8] DISC-FRICTION  
97. 147-0227 [1] PISTON-CLUTCH  
98. 6V-8335 M [16] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
99. 147-0262 [4] WASHER (19.1X24.1X1.5-MM THK)  
100. 147-0266 [2] BOLT (3/4-16X1.417-IN)  
101. 6V-2455 [1] SENSOR GP-SPEED (TRANSMISSION OUTPUT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E SLEEVE (14-CM)  
  171-5349 [1] STRAP-MARKER  
102. 1V-6341 [1] SEAL  
103. 3J-1907 [14] SEAL-O-RING  
104. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
105. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
106. 147-0232 [4] PLUG  
107. 9X-6615 M [12] BOLT (M5X0.8X30-MM)  
108. 7T-3253 [2] DOWEL  
109. 7T-3251 [1] BREATHER (TRANSMISSION)  
110. 7X-4744 [1] SEAL-O-RING  
111. 147-0255 [1] HOUSING-SPRING  
112. 147-0206 [1] SPRING  
113. 2H-3698 [1] BALL  
114. 147-0256 [1] SHAFT AS-REVERSE  
  163-9091 [1] PLUG  
  147-0270 [1] ORIFICE  
115. 147-0226 [1] TUBE AS  
116. 147-0236 [1] TUBE AS  
117. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
118. 106-9861 [1] PLATE AS-COVER  
119. 121-4036 Y [2] VALVE GP-SOLENOID (TORQUE CONVERTER INLET)  
120. 6T-9202 [2] PLUG  
121. 121-7396 [1] VALVE GP-RELIEF (CLUTCH 2 SOLENOID)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
122. 147-0209 Y [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
123. 9W-5460 [1] RING  
124. 7T-2651 [1] STRAINER-SUCTION (TRANSMISSION)  
125. 4F-7952 [1] SEAL-O-RING  
126. 8T-1580 [1] CUP-BEARING  
127. 8T-0271 M [2] BOLT-SOCKET HEAD (M10X1.5X35-MM)  
128. 150-7732 [2] SEAL-O-RING  
129. 8T-1581 [1] BEARING-TAPERED ROLLER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30010237
 

147-0204: TRANSMISSION GP-POWER SHIFT

147-0204 TRANSMISSION GP-POWER SHIFT
S/N 1TR1550-2096; 2DR3250-3741
PART OF 142-4437 TRANSMISSION AR-POWER SHIFT
Type 3
AN ATTACHMENT
i01346558 SEBP3001
1470204 TRANSMISSION GP-POWER SHIFT Parts scheme 1470204 TRANSMISSION GP-POWER SHIFT Parts scheme 1470204 TRANSMISSION GP-POWER SHIFT Parts scheme 1470204 TRANSMISSION GP-POWER SHIFT Parts scheme 1470204 TRANSMISSION GP-POWER SHIFT Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-0885 [1] RETAINER  
2. 178-9566 [2] SPRING-PISTON  
3. 8C-5748 M [4] BOLT (M8X1.25X55-MM)  
4. 161-3249 [1] RING-RETAINING  
5. 147-0245 [1] CASE AS-FRONT  
  9W-0717 [4] PLUG  
  147-0268 [4] PLUG  
6. 119-4740 [1] FILTER-OIL (STANDARD EFFICIENCY)  
7. 147-0218 [1] TUBE AS  
8. 148-8988 Y [2] VALVE GP-SOLENOID (FORWARD HIGH, FORWARD LOW)  
9. 8C-8545 M [2] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
10. 120-9762 [5] SEAL-O-RING  
11. 238-1966 Y [1] VALVE GP-SOLENOID (REVERSE)  
12. 147-0253 [1] CASE AS-REAR  
  9W-0717 [11] PLUG  
13. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
14. 121-7402 B [1] SHIM (0.6-MM THK)  
15. 121-7401 B [1] SHIM (0.18-MM THK)  
16. 121-7400 B [1] SHIM (0.08-MM THK)  
17. 121-7399 B [1] SHIM (0.05-MM THK)  
18. 7T-2646 [2] SPACER (66X79.5X2.02-MM THK)  
19. 6T-9166 B [2] SHIM (0.051-MM THK)  
20. 6T-9165 B [2] SHIM (0.076-MM THK)  
21. 6T-9164 B [2] SHIM (0.178-MM THK)  
22. 122-1878 [1] RING-SEAL  
23. 147-0201 [1] TUBE AS  
24. 7W-3556 [12] WASHER (14.27X20.57X1.5-MM THK)  
25. 147-0234 [6] BOLT (9/16-18X0.83-IN)  
26. 1U-8846 B [1] SEALANT-GASKET  
27. 5P-8066 [2] SEAL-O-RING  
28. 6V-8097 M [3] BOLT (M12X1.75X30-MM)  
29. 7T-3195 [3] WASHER (12.3X47X6.35-MM THK)  
30. 122-6787 [2] YOKE AS  
    (EACH AS INCLUDES)
  [1] GUARD  
31. 216-2267 [2] SEAL-LIP TYPE  
32. 121-7385 [1] PUMP GP-TRANSMISSION (DIRECT DRIVE)  
  208-8240 [1] SEAL-LIP TYPE  
33. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
34. 173-0332 [1] SHAFT AS (COUNTERSHAFT)  
  163-9091 [1] PLUG  
35. 7X-4741 [1] SEAL  
36. 9S-4185 [3] PLUG (3/4-16-THD)  
37. 3K-0360 [3] SEAL-O-RING  
38. 123-8906 [5] CUP-TAPERED ROLLER  
39. 123-8905 [5] CONE-BEARING  
40. 121-0694 [2] WASHER-THRUST (40X70X4-MM THK)  
41. 172-5317 [6] BEARING-SPECIAL  
42. 123-8913 [2] BEARING-ROLLER  
43. 147-0224 [1] GEAR (45/32-TEETH)  
44. 8E-5707 [7] PLATE-END  
45. 6V-8757 [6] RING-RETAINING  
46. 6T-9194 [45] PLATE  
47. 6Y-7929 [37] DISC-FRICTION  
48. 274-8638 [6] RING-RETAINING  
49. 121-2500 [4] WASHER-THRUST (50X70X4-MM THK)  
50. 147-0202 [2] GEAR (45/24-TEETH)  
51. 147-0257 [1] SHAFT AS-INPUT  
  123-0714 [1] BEARING  
  123-2920 [3] PLUG  
52. 9U-8886 [4] RING-SEAL  
53. 123-8910 [1] CUP-TAPERED ROLLER  
54. 123-8909 [1] CONE-BEARING  
55. 7T-6655 [4] BEARING  
56. 147-0259 [2] SPACER (51.1X54.9X18.7-MM THK)  
57. 147-0238 [5] SPRING AS  
58. 6V-5100 [5] SEAL-O-RING  
59. 147-0228 [4] PISTON-CLUTCH  
60. 6T-9196 [7] SEAL  
61. 122-1886 [1] RING-SEAL  
62. 123-8907 [3] CONE-BEARING  
63. 123-8908 [3] CUP-TAPERED ROLLER  
64. 147-0212 [1] GEAR (42-TEETH)  
65. 147-0216 [1] GEAR (38-TEETH)  
66. 147-0203 [3] WASHER-THRUST (45.3X65X5-MM THK)  
67. 147-0258 [1] SPACER (46X50X16-MM THK)  
68. 147-0215 [1] GEAR (45/19-TEETH)  
69. 172-6050 [6] BEARING-SPECIAL  
70. 122-1877 [3] WASHER-THRUST (40X65X4-MM THK)  
71. 6Y-1192 [7] RING-SEAL  
72. 123-8912 [6] BEARING-ROLLER  
73. 9S-4191 [14] PLUG (9/16-18-THD)  
74. 147-0264 [1] GEAR (45/28-TEETH)  
75. 147-0260 [1] RETAINER-SPRING  
76. 095-0928 [1] RING-RETAINING  
77. 147-0205 [2] WASHER (55X78X5-MM THK)  
78. 147-0248 [1] SPACER (56.2X60X15.8-MM THK)  
79. 157-2090 [1] GEAR (38-TEETH)  
80. 172-6743 [2] BEARING-SPECIAL  
81. 147-0242 [1] GEAR (48-TEETH)  
82. 150-3757 [2] BEARING  
83. 009-2062 [2] SEAL-O-RING  
84. 157-2088 [2] PISTON AS  
85. 147-0261 [1] SHAFT AS-OUTPUT (REAR)  
  163-9091 [2] PLUG  
86. 095-0927 [1] RING-RETAINING  
87. 122-1884 [1] SPACER (45X49X8-MM THK)  
88. 147-0210 [1] GEAR (45/36-TEETH)  
89. 147-0207 [1] SHAFT AS-OUTPUT (FRONT)  
90. 122-1879 [2] SPACER (58X67.5X2-MM THK)  
91. 104-3288 B [2] SHIM (0.05-MM THK)  
92. 121-2059 B [2] SHIM (0.08-MM THK)  
93. 121-2060 B [2] SHIM (0.18-MM THK)  
94. 121-2061 B [2] SHIM (0.6-MM THK)  
95. 147-0211 [1] ELBOW AS  
  3G-6927 [1] ADAPTER  
96. 6Y-7957 [8] DISC-FRICTION  
97. 147-0227 [1] PISTON-CLUTCH  
98. 6V-8335 M [16] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
99. 147-0262 [4] WASHER (19.1X24.1X1.5-MM THK)  
100. 147-0266 [2] BOLT (3/4-16X1.417-IN)  
101. 189-5746 Y [1] SENSOR GP-SPEED (TRANSMISSION OUTPUT)  
102. 1V-6341 [1] SEAL  
103. 3J-1907 [14] SEAL-O-RING  
104. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
105. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
106. 205-9244 [4] PLUG  
107. 9X-6615 M [12] BOLT (M5X0.8X30-MM)  
108. 7T-3253 [2] DOWEL  
109. 7T-3251 [1] BREATHER (TRANSMISSION)  
110. 7X-4744 [1] SEAL-O-RING  
111. 147-0255 [1] HOUSING-SPRING  
112. 147-0206 [1] SPRING  
113. 2H-3698 [1] BALL  
114. 147-0256 [1] SHAFT AS-REVERSE  
  147-0270 [1] ORIFICE  
  163-9091 [1] PLUG  
115. 147-0226 [1] TUBE AS  
116. 147-0236 [1] TUBE AS  
117. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
118. 106-9861 [1] PLATE AS-COVER  
119. 121-4036 Y [2] VALVE GP-SOLENOID (TORQUE CONVERTER INLET)  
120. 6T-9202 [2] PLUG  
121. 121-7396 [1] VALVE GP-RELIEF (CLUTCH 2 SOLENOID)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
122. 147-0209 Y [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
123. 9W-5460 [1] RING  
124. 7T-2651 [1] STRAINER-SUCTION (TRANSMISSION)  
125. 4F-7952 [1] SEAL-O-RING  
126. 8T-1580 [1] CUP-BEARING  
127. 8T-0271 M [2] BOLT-SOCKET HEAD (M10X1.5X35-MM)  
128. 150-7732 [2] SEAL-O-RING  
129. 8T-1581 [1] BEARING-TAPERED ROLLER  
130. 6T-9163 B [2] SHIM (0.599-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30010238
 

192-0849: TRANSMISSION GP-POWER SHIFT

192-0849 TRANSMISSION GP-POWER SHIFT -ALL WHEEL DRIVE
S/N 1TR1550-2096; 2DR3250-3741
PART OF 202-7432 TRANSMISSION & MOUNTING GP
AN ATTACHMENT
i01430573 SEBP3001
1920849 TRANSMISSION GP-POWER SHIFT Parts scheme 1920849 TRANSMISSION GP-POWER SHIFT Parts scheme 1920849 TRANSMISSION GP-POWER SHIFT Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-9566 [2] SPRING-PISTON  
2. 8C-5748 M [4] BOLT (M8X1.25X55-MM)  
3. 161-3249 [1] RING-RETAINING  
4. 8T-1581 [1] BEARING-TAPERED ROLLER  
5. 150-7732 [2] SEAL-O-RING  
6. 8T-0271 M [2] BOLT-SOCKET HEAD (M10X1.5X35-MM)  
7. 8T-1580 [1] CUP-BEARING  
8. 4F-7952 [1] SEAL-O-RING  
9. 147-0218 [1] TUBE AS  
10. 148-8988 Y [2] VALVE GP-SOLENOID  
11. 8C-8545 M [2] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
12. 120-9762 [5] SEAL-O-RING  
13. 148-8986 Y [1] VALVE GP-SOLENOID (REVERSE)  
14. 147-0253 [1] CASE AS-REAR  
  371-8635 [1] CASE-REAR  
  163-9091 [11] PLUG  
15. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
  121-7402 B [1] SHIM (0.6-MM THK)  
  121-7401 B [1] SHIM (0.18-MM THK)  
  121-7400 B [1] SHIM (0.08-MM THK)  
  121-7399 B [1] SHIM (0.05-MM THK)  
16. 7T-2651 [1] STRAINER-SUCTION (TRANSMISSION)  
17. 9W-5460 [1] RING  
18. 147-0209 Y [1] VALVE GP-RELIEF (FORWARD HIGH)  
19. 121-7396 [1] VALVE GP-RELIEF (CLUTCH 2 SOLENOID)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
20. 7T-2646 [2] SPACER (66X79.5X2.02-MM THK)  
  6T-9166 B [2] SHIM (0.051-MM THK)  
  6T-9165 B [2] SHIM (0.076-MM THK)  
  6T-9164 B [2] SHIM (0.178-MM THK)  
  6T-9163 [2] SHIM (0.599-MM THK)  
21. 6T-9202 [2] PLUG  
22. 121-4036 Y [2] VALVE GP-SOLENOID  
23. 106-9861 [1] PLATE AS-COVER  
24. 122-1878 [1] RING-SEAL  
25. 147-0201 [1] TUBE AS  
26. 7W-3556 [12] WASHER (14.27X20.57X1.5-MM THK)  
27. 147-0234 [6] BOLT (9/16-18X0.83-IN)  
28. 1U-8846 B SEALANT-GASKET  
29. 5P-8066 [2] SEAL-O-RING  
30. 6V-8097 M [3] BOLT (M12X1.75X30-MM)  
31. 7T-3195 [3] WASHER (12.3X47X6.35-MM THK)  
32. 122-6787 [2] YOKE AS  
    (EACH INCLUDES)
  [1] GUARD  
33. 216-2267 [2] SEAL-LIP TYPE  
34. 121-7385 Y [1] PUMP GP-TRANSMISSION (DIRECT DRIVE)  
35. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
36. 173-0332 [1] SHAFT AS  
  163-9091 [1] PLUG  
37. 7X-4741 [1] SEAL  
38. 9S-4185 [3] PLUG (3/4-16-THD)  
39. 3K-0360 [3] SEAL-O-RING  
40. 123-8906 [5] CUP-TAPERED ROLLER  
41. 123-8905 [5] CONE-BEARING  
42. 121-0694 [2] WASHER-THRUST (40X70X4-MM THK)  
43. 172-5317 [6] BEARING-SPECIAL  
44. 123-8913 [2] BEARING-ROLLER  
45. 147-0224 [1] GEAR (45/32-TEETH)  
46. 8E-5707 [7] PLATE-END  
47. 6V-8757 [6] RING-RETAINING  
48. 274-4553 [45] DISC-CLUTCH  
49. 6Y-7929 [37] DISC-FRICTION  
50. 9U-8875 [6] RING-RETAINING  
51. 121-2500 [4] WASHER-THRUST (50X70X4-MM THK)  
52. 147-0202 [2] GEAR (45/24-TEETH)  
53. 147-0257 [1] SHAFT AS-INPUT  
  123-2920 [3] PLUG  
54. 9U-8886 [4] RING-SEAL  
55. 123-8910 [1] CUP-TAPERED ROLLER  
56. 123-8909 [1] CONE-BEARING  
57. 7T-6655 [4] BEARING  
58. 147-0259 [2] SPACER (51.1X54.9X18.7-MM THK)  
59. 147-0238 [5] SPRING AS  
60. 6V-5100 [5] SEAL-O-RING  
61. 147-0228 [4] PISTON-CLUTCH  
62. 6T-9196 [7] SEAL  
63. 122-1886 [1] RING-SEAL  
64. 123-8907 [3] CONE-BEARING  
65. 123-8908 [3] CUP-TAPERED ROLLER  
66. 147-0212 [1] GEAR (42-TEETH)  
67. 147-0216 [1] GEAR (38-TEETH)  
68. 147-0203 [3] WASHER-THRUST (45.3X65X5-MM THK)  
69. 147-0258 [1] SPACER (46X50X16-MM THK)  
70. 147-0215 [1] GEAR (45/19-TEETH)  
71. 172-6050 [6] BEARING-SPECIAL  
72. 122-1877 [3] WASHER-THRUST (40X65X4-MM THK)  
73. 6Y-1192 [7] RING-SEAL  
74. 123-8912 [6] BEARING-ROLLER  
75. 9S-4191 [14] PLUG (9/16-18-THD)  
76. 147-0264 [1] GEAR (45/28-TEETH)  
77. 147-0260 [1] RETAINER-SPRING  
78. 095-0928 [1] RING-RETAINING  
79. 147-0205 [2] WASHER (55X78X5-MM THK)  
80. 147-0248 [1] SPACER (56.2X60X15.8-MM THK)  
81. 157-2090 [1] GEAR (38-TEETH)  
82. 172-6743 [2] BEARING-SPECIAL  
83. 147-0242 [1] GEAR (48-TEETH)  
84. 150-3757 [2] BEARING  
85. 009-2062 [2] SEAL-O-RING  
86. 157-2088 [2] PISTON AS  
87. 147-0261 [1] SHAFT AS-OUTPUT (REAR)  
  163-9091 [2] PLUG  
88. 095-0927 [1] RING-RETAINING  
89. 122-1884 [1] SPACER (45X49X8-MM THK)  
90. 147-0210 [1] GEAR (45/36-TEETH)  
91. 147-0207 [1] SHAFT AS-OUTPUT (FRONT)  
92. 122-1879 [2] SPACER (58X67.5X2-MM THK)  
  104-3288 B [2] SHIM (0.05-MM THK)  
  121-2059 B [2] SHIM (0.08-MM THK)  
  121-2060 B [2] SHIM (0.18-MM THK)  
  121-2061 B [2] SHIM (0.6-MM THK)  
93. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
94. 147-0236 [1] TUBE AS  
95. 147-0226 [1] TUBE AS  
96. 147-0256 [1] SHAFT AS-REVERSE  
  163-9091 [1] PLUG  
  147-0270 [1] ORIFICE  
97. 147-0211 [1] ELBOW AS  
  342-3830 [1] ADAPTER  
  3G-6927 [1] ADAPTER  
98. 6Y-7957 [8] DISC-FRICTION  
99. 147-0227 [1] PISTON-CLUTCH  
100. 161-7632 M [16] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
101. 147-0262 [4] WASHER (19.1X24.1X1.5-MM THK)  
102. 147-0266 [2] BOLT (3/4-16X1.417-IN)  
103. 189-5746 Y [1] SENSOR GP-SPEED (OUTPUT)  
104. 1V-6341 [1] SEAL  
105. 3J-1907 [14] SEAL-O-RING  
106. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
107. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
108. 205-9244 [4] PLUG  
109. 9X-6615 M [12] BOLT (M5X0.8X30-MM)  
110. 7T-3253 [2] DOWEL  
111. 7T-3251 [1] BREATHER (TRANSMISSION)  
112. 192-0850 [1] CASE AS  
  370-7751 [1] CASE-FRONT  
  163-9091 [4] PLUG  
  147-0268 [4] PLUG  
113. 122-1883 [1] SPACER (38X45X5-MM THK)  
114. 121-0885 [1] RETAINER  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30010239
 

147-0209: VALVE GP-RELIEF

147-0209 VALVE GP-RELIEF
S/N 1TR1550-2096; 2DR3250-3741
PART OF 147-0204, 192-0849 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT
i00700238 SEBP3001
1470209 VALVE GP-RELIEF Parts scheme
  For full view, you need register

Parts for your 438C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-4744 [1] SEAL-O-RING  
2. 6V-9178 [1] SEAL-O-RING  
3. 106-9586 [1] SEAL-O-RING  
 

Information:

Operation and Maintenance Manual
Fifth Gear Lockout Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Transmission Magnetic Screen - Clean
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Transmission Oil - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Transmission Oil Level - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Bench Test Procedure for a 416C, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, and 442D Backhoe Loader Powershift Transmission {3030, 3174}
Bench Test Procedure for a 416C, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, and 442D Backhoe Loader Powershift Transmission {3030, 3174}
Service Letter-NACD
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Service Letter-Australia
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Service Letter-CFEL
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Service Letter-CSARL
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Service Letter-Americas
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Technical Information Bulletin
Transmission May Remain In Neutral Following Operation Of The Neutralizer Push Button Switch
Transmission May Remain In Neutral Following Operation Of The Neutralizer Push Button Switch
Bearing Part Number Listed Incorrectly For Transmissions
Bearing Part Number Listed Incorrectly For Transmissions
Direct Drive Transmission Front Output (All Wheel Dirve) Shaft Failures
Direct Drive Transmission Front Output (All Wheel Dirve) Shaft Failures
Transmission Controls (Shift Lever) May Fail
Transmission Controls (Shift Lever) May Fail
Specifications
Torque Converter<BR> 111-7808
416C, 426C, 428C, 436C & 438C BACKHOE LOADERS TRANSMISSION
Transmission
416C, 426C, 428C, 436C & 438C BACKHOE LOADERS TRANSMISSION
Introduction
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT
Transmission
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Service Letter-China
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Service Letter-Asia
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Systems Operation
Systems Operation
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Letter-APD
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
Testing and Adjusting
Testing And Adjusting
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT
Speed Sensor (Transmission Output) - Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
CID 0191 FMI 08 Speed Sensor (Transmission Output) Abnormal Signal - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Transmission Electronic Control System
Bench Test Procedures
Bench Test Procedure for a 416C, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, and 442D Backhoe Loader Powershift Transmission {3030, 3174}
Bench Test Procedure for a 416C, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, and 442D Backhoe Loader Powershift Transmission {3030, 3174}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Engine, Torque Converter, Transmission &amp; Implement Pump
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC
Engine &amp; Transmission
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC
Solenoid Valve (Transmission)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Transmission (Direct Drive) (If Equipped)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Transmission (Direct Drive) (If Equipped)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Transmission (Powershift) (If Equipped)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Transmission (Powershift) (If Equipped)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Engine, Torque Converter &amp; Transmission
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Engine &amp; Transmission
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN
Service Magazine
C-Series Backhoe Loaders Are Being Updated {1000,0685,0720,1001,1013,1350,3030,7950}
1998/01/26
Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08
Use 152-7055 Spring Compressor For Disassembly And Assembly Of Transmission Clutch Shaft Assemblies {3150}
1998/10/05
Assembling The Transmission Thrust Bearings For Backhoe Loaders {3030}
1999/06/28
Seals for the Relief Valves on the Transmission {5117}
2001/06/04
New Lip Seals Are Used in the Transmission {3030, 3066}
2003/09/08
A New Shaft Assembly Is Now Used {3030}
2003/10/20
A New Torque Converter Is Now Used {3101}
2004/06/28
An Improved Gear Is Now Used in Transmissions {3030}
2004/07/05
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog 438C :

142-4437 TRANSMISSION AR-POWER SHIFT
107-3762 TRANSMISSION AR-DIRECT DRIVE
TRANSMISSION & MOUNTING GP
202-7432 TRANSMISSION & MOUNTING GP
TRANSMISSION & MOUNTING GP
202-7431 TRANSMISSION & MOUNTING GP
SHAFT GP-DRIVE
138-4559 SHAFT GP-DRIVE
SHAFT GP-DRIVE
130-3014 SHAFT GP-DRIVE
SHAFT GP-DRIVE
130-3013 SHAFT GP-DRIVE
SHAFT GP-DRIVE
113-1153 SHAFT GP-DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7814 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7814 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
111-7814 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
192-0844 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-POWER SHIFT
147-0204 TRANSMISSION GP-POWER SHIFT
TRANSMISSION GP-POWER SHIFT
147-0204 TRANSMISSION GP-POWER SHIFT
TRANSMISSION GP-POWER SHIFT
147-0204 TRANSMISSION GP-POWER SHIFT
TRANSMISSION GP-POWER SHIFT
192-0849 TRANSMISSION GP-POWER SHIFT

Truck sale:

Caterpillar 438C
 
Caterpillar 438C
- backhoe loader
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 438CAWS, baggerlader, Bau-Und Bergbauausrüstung
35.061 
Caterpillar 438CAWS, baggerlader, Bau-Und Bergbauausrüstung
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
 
42,862 
Caterpillar 438CAWS, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
 
 
Caterpillar 438C, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
CATERPILLAR 438C 2000
 
CATERPILLAR 438C 2000
- BACKHOE LOADERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.