AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1W-5082 CYLINDER BLOCK GP S/N 99U7599-8286 3408 MARINE ENGINE


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

MARINE ENGINE 3408 MARINE ENGINE 99U
 3408C Marine Engine 99U07599-UP SEBP3013 3408 99U   (1976)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
122-8604 CYLINDER BLOCK GP
CYLINDER BLOCK GP
122-8605 CYLINDER BLOCK GP
CYLINDER BLOCK GP
1W-5082 CYLINDER BLOCK GP
CYLINDER BLOCK GP
1W-5082 CYLINDER BLOCK GP
CYLINDER BLOCK GP
1W-5084 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4W-6144 CYLINDER BLOCK GP
 

#SEBP30130040
 

1W-5082: CYLINDER BLOCK GP

1W-5082 CYLINDER BLOCK GP
S/N 99U7599-8286
i00107806 SEBP3013
1W5082 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-4990 [8] JET AS-PISTON COOLING  
2. 4N-1650 [4] DOWEL  
3. 8T-6763 C [4] PLUG-PIPE (1/4-18-THD)  
4. 1W-5081 Y [1] CYLINDER BLOCK AS  
5. 8T-6757 C [7] PLUG-PIPE  
6. 6N-9133 [2] GASKET-PLATE  
7. 6I-4613 C [2] PLATE-SPACER  
8. 4N-0693 [3] PLUG-TAPERLOCK (1-1/2-12-THD)(38.10MM OD)  
    -OR-
  7C-9614 [3] PLUG-TAPERLOCK (1-5/8-12-THD)(41.28MM OD)  
9. 4N-0683 [4] DOWEL  
10. 7E-6479 [8] BOLT-SPECIAL (OIL JET)  
11. 3B-0645 [1] PLUG-CUP  
12. 6L-4428 [3] STUD-TAPERLOCK (3/8-16X4.01-IN)  
13. 2M-9780 [2] SEAL-O-RING  
14. 7W-6534 C [2] PLUG-PIPE  
15. 8M-8283 [2] SEAL-O-RING  
16. 3S-6605 [2] PLUG-CUP  
17. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
18. 8T-6764 BC [1] PLUG-PIPE (1/8-27-THD)  
19. 7C-7407 [1] STUD  
20. 7W-6534 BCJ [1] PLUG-PIPE  
21. 9S-4190 BJ [2] PLUG-O-RING (7/8-14-THD)  
  2M-9780 BJ [2] SEAL-O-RING  
22. 7W-6534 CJ [1] PLUG-PIPE  
23. 7W-6534 BC [1] PLUG-PIPE  
24. 7W-6534 B [1] PLUG-PIPE  
  4W-6061 AFL SLEEVE  
  4W-4588 AFN SLEEVE-LIFTER BORE  
  9Y-3368 AFN INSERT-LINER SEAT (0.822-MM THK)  
  6I-4361 AFN INSERT-LINER SEAT (0.772-MM THK)  
  6I-4362 AFN INSERT-LINER SEAT (0.872-MM THK)  
  2W-3815 AFN INSERT-LINER SEAT (1.605-MM THK)  
  6I-4361 AFN INSERT-LINER SEAT (0.772-MM THK)  
  6I-4362 AFN INSERT-LINER SEAT (0.872-MM THK)  
  5N-0093 AFN INSERT-LINER SEAT (2.71-MM THK)  
  6I-4365 AFN INSERT-LINER SEAT (2.66-MM THK)  
  6I-4366 AFN INSERT-LINER SEAT (2.76-MM THK)  
  101-0523 AFN INSERT-LINER SEAT (5.21-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  J   MOUNTED ON LH SIDE OF CYLINDER BLOCK
  L   FOR SALVAGE OF BOTTOM LINER O-RING BORE, QUANTITY TO BE DETERMINED BY USER
  N   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK, QUANTITY TO BE DETERMINED BY USER
  Y   SEPARATE ILLUSTRATION
 

#SEBP30130041
 

1W-5082: CYLINDER BLOCK GP

1W-5082 CYLINDER BLOCK GP
S/N 99U8511-99999
i00107807 SEBP3013
1W5082 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-4990 [8] JET AS-PISTON COOLING  
2. 4N-1650 [4] DOWEL  
3. 8T-6763 [4] PLUG-PIPE (1/4-18-THD)  
4. 110-3779 CY [1] CYLINDER BLOCK AS  
5. 8T-6757 [7] PLUG-PIPE  
6. 6N-9133 [2] GASKET-PLATE  
7. 6I-4613 [2] PLATE-SPACER  
8. 4N-0693 [3] PLUG-TAPERLOCK (1-1/2-12-THD)  
  7C-9614 B [3] PLUG-TAPERLOCK (1-5/8-12-THD)  
9. 4N-0683 [4] DOWEL  
10. 7E-6479 [8] BOLT-SPECIAL (OIL JET)  
11. 3B-0645 [1] PLUG-CUP  
12. 6L-4428 [3] STUD-TAPERLOCK (3/8-16X4.01-IN)  
13. 114-4427 C [2] SEAL-O-RING  
14. 7W-6534 [2] PLUG-PIPE  
15. 5P-8356 [2] SEAL-O-RING  
16. 3S-6605 [2] PLUG-CUP  
17. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
18. 8T-6764 B [1] PLUG-PIPE (1/8-27-THD)  
19. 7C-7407 [1] STUD  
20. 7W-6534 J [1] PLUG-PIPE  
22. 7W-6534 J [1] PLUG-PIPE  
23. 7W-6534 B [1] PLUG-PIPE  
24. 7W-6534 B [1] PLUG-PIPE  
  4W-6061 AFL SLEEVE  
  4W-4588 AFN SLEEVE-LIFTER BORE  
  9Y-3368 AFN INSERT-LINER SEAT (0.822-MM THK)  
  6I-4361 AFN INSERT-LINER SEAT (0.772-MM THK)  
  6I-4362 AFN INSERT-LINER SEAT (0.872-MM THK)  
  2W-3815 AFN INSERT-LINER SEAT (1.605-MM THK)  
  6I-4363 AFN INSERT-LINER SEAT (1.555-MM THK)  
  6I-4364 AFN INSERT-LINER SEAT (1.655-MM THK)  
  5N-0093 AFN INSERT-LINER SEAT (2.71-MM THK)  
  6I-4365 AFN INSERT-LINER SEAT (2.66-MM THK)  
  6I-4366 AFN INSERT-LINER SEAT (2.76-MM THK)  
  101-0523 AFN INSERT-LINER SEAT (5.21-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  J   MOUNTED ON LH SIDE OF CYLINDER BLOCK
  L   FOR SALVAGE OF BOTTOM LINER O-RING BORE, QUANTITY TO BE DETERMINED BY USER
  N   FOR SALVAGE OF DAMAGED CYL BLOCK LIFTER BORES REFER TO SEBF8076 IN SIS WEB
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30130042
 

1W-5084: CYLINDER BLOCK GP

1W-5084 CYLINDER BLOCK GP
S/N 99U7599-8510
FIELD REPLACEMENT FOR @@@@@ 1W-5081@@@@@, @@@@@122-8599@@@@@
i00107808 SEBP3013
1W5084 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-7410 [6] PLUG-PIPE (9.53MM PIPE THD)  
2. 9S-4190 [4] PLUG-O-RING (7/8-14-THD)  
  2M-9780 [4] SEAL-O-RING  
3. 9F-2247 C [7] PLUG-PIPE (3.18MM PIPE THD)  
4. 3J-5389 [2] PLUG (EXTERNAL)(12.70MM PIPE THD)  
5. 4N-6658 [2] BUSHING (1.3-IN WIDE)  
6. 3S-6605 [2] PLUG-CUP (8.05MM OD)  
7. 4N-0685 [3] BUSHING (1-IN WIDE)  
8. 3B-0645 [1] PLUG-CUP (32.08MM OD)  
9. 7E-6479 C [8] BOLT-SPECIAL (OIL JET)  
10. 7W-4990 C [8] JET AS-PISTON COOLING  
11. 4N-0693 [3] PLUG-TAPERLOCK (1-1/2-12-THD)(38.10MM OD)  
    -OR-
  7C-9614 C [3] PLUG-TAPERLOCK (1-5/8-12-THD)(41.28MM OD)  
12. 7H-3171 [4] PLUG-PIPE  
13. 4N-5858 [5] CAP (CRANKSHAFT BEARING)  
14. 3P-1323 [10] BOLT-BEARING CAP (7/8-14X7.75-IN)  
  9H-1031 [10] WASHER-HARD (24X41.5X6-MM THK)  
15. 5M-6214 C [1] PLUG (1/8-27 PTF)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP30130043
 

4W-6144: CYLINDER BLOCK GP

4W-6144 CYLINDER BLOCK GP
S/N 99U7599-8286
i00379876 SEBP3013
4W6144 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-4990 C [8] JET AS-PISTON COOLING  
2. 4N-1650 [4] DOWEL  
3. 7H-3171 [4] PLUG-PIPE  
4. 1W-5081 YC [1] CYLINDER BLOCK AS  
5. 9F-2247 C [7] PLUG-PIPE  
6. 6N-9133 [2] GASKET-PLATE  
7. 6I-4613 [2] PLATE-SPACER  
8. 4N-0693 [3] PLUG-TAPERLOCK (1-1/2-12-THD)(38.10MM OD)  
    -OR-
  7C-9614 C [3] PLUG-TAPERLOCK (1-5/8-12-THD)(41.28MM OD)  
9. 4N-0683 [4] DOWEL  
10. 7E-6479 C [8] BOLT-SPECIAL (OIL JET)  
11. 3B-0645 [1] PLUG-CUP  
12. 9S-4190 J [2] PLUG-O-RING (7/8-14-THD)  
  2M-9780 J [2] SEAL-O-RING  
13. 2M-9780 J [4] SEAL-O-RING  
14. 7M-7410 [6] PLUG-PIPE  
15. 8M-8283 [2] SEAL-O-RING  
16. 3S-6605 [2] PLUG-CUP  
17. 9S-4190 [4] PLUG-O-RING (7/8-14-THD)  
18. 5M-6214 [1] PLUG (1/8-27 PTF)  
19. 7C-7407 [1] STUD  
20. 7M-7410 J [1] PLUG-PIPE  
  4W-6061 AFL SLEEVE  
  4W-4588 AFT SLEEVE-LIFTER BORE  
  2W-3815 TAF INSERT-LINER SEAT (1.605-MM THK)  
  6I-4363 ABF INSERT-LINER SEAT (1.555-MM THK)  
  6I-4364 ABF INSERT-LINER SEAT (1.655-MM THK)  
  5N-0093 TAF INSERT-LINER SEAT (2.71-MM THK)  
  6I-4365 ABF INSERT-LINER SEAT (2.66-MM THK)  
  6I-4366 ABF INSERT-LINER SEAT (2.76-MM THK)  
  9Y-3368 AFT INSERT-LINER SEAT (0.822-MM THK)  
  6I-4361 ABF INSERT-LINER SEAT (0.772-MM THK)  
  6I-4362 ABF INSERT-LINER SEAT (0.872-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  J   MOUNTED ON LH SIDE OF CYLINDER BLOCK
  L   FOR SALVAGE OF THE BOTTOM LINER O-RING BORE, QUANTITY TO BE DETERMINED BY USER
  T   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK, QUANTITY TO BE DETERMINED BY USER
  Y   SEPARATE ILLUSTRATION
 

#SEBP30130044
 

4W-6144: CYLINDER BLOCK GP

4W-6144 CYLINDER BLOCK GP
S/N 99U8511-99999
i00379877 SEBP3013
4W6144 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-4990 [8] JET AS-PISTON COOLING  
2. 4N-1650 [4] DOWEL  
3. 8T-6763 C [4] PLUG-PIPE (1/4-18-THD)  
4. 110-3779 CY [1] CYLINDER BLOCK AS  
5. 8T-6757 C [7] PLUG-PIPE  
6. 6N-9133 [2] GASKET-PLATE  
7. 6I-4613 [2] PLATE-SPACER  
8. 7C-9614 C [3] PLUG-TAPERLOCK (1-5/8-12-THD)  
9. 4N-0683 [4] DOWEL  
10. 7E-6479 [8] BOLT-SPECIAL (OIL JET)  
11. 3B-0645 [1] PLUG-CUP  
12. 9S-4190 J [2] PLUG-O-RING (7/8-14-THD)  
  2M-9780 J [4] SEAL-O-RING  
13. 114-4427 C [4] SEAL-O-RING  
14. 7W-6534 C [6] PLUG-PIPE  
15. 5P-8356 C [2] SEAL-O-RING  
16. 3S-6605 [2] PLUG-CUP  
17. 9S-4190 [4] PLUG-O-RING (7/8-14-THD)  
18. 8T-6764 C [1] PLUG-PIPE (1/8-27-THD)  
19. 7C-7407 [1] STUD  
20. 7W-6534 J [6] PLUG-PIPE  
   
  4W-6061 AFL SLEEVE  
  4W-4588 AFT SLEEVE-LIFTER BORE  
  2W-3815 AFT INSERT-LINER SEAT (1.605-MM THK)  
  6I-4363 ABF INSERT-LINER SEAT (1.555-MM THK)  
  6I-4364 ABF INSERT-LINER SEAT (1.655-MM THK)  
  5N-0093 AFT INSERT-LINER SEAT (2.71-MM THK)  
  6I-4365 ABF INSERT-LINER SEAT (2.66-MM THK)  
  6I-4366 ABF INSERT-LINER SEAT (2.76-MM THK)  
  9Y-3368 AFT INSERT-LINER SEAT (0.822-MM THK)  
  6I-4361 ABF INSERT-LINER SEAT (0.772-MM THK)  
  6I-4362 ABF INSERT-LINER SEAT (0.872-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  J   MOUNTED ON LH SIDE OF CYLINDER BLOCK
  L   FOR SALVAGE OF THE BOTTOM LINER O-RING BORE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  T   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK
  Y   SEPARATE ILLUSTRATION
 

#SEBP30130045
 

105-3788: CYLINDER HEAD AS

105-3788 CYLINDER HEAD AS
PART OF 7W-2224 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7W-2225@@@@@
i00093513 SEBP3013
1053788 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 [6] PLUG-CUP  
2. 4N-5893 [8] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 1W-5283 [8] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 3B-0623 [8] PLUG-CUP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP30130046
 

143-0040: CYLINDER HEAD AS

143-0040 CYLINDER HEAD AS
S/N 99U8989-99999
PART OF 143-0041, 7W-2225 CYLINDER HEAD AS
FIELD REPLACEMENT ORDER @@@@@143-0041@@@@@
ALSO AN ATTACHMENT
i00566895 SEBP3013
1430040 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 [6] PLUG-CUP  
2. 4N-5893 [8] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 1W-5283 [8] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 3B-0623 [8] PLUG-CUP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP30130047
 

143-0041: CYLINDER HEAD AS

143-0041 CYLINDER HEAD AS
S/N 99U8989-99999
PART OF 141-1207 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@143-0040@@@@@
i00566896 SEBP3013
1430041 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0040 Y [1] CYLINDER HEAD AS  
2. 173-7188 [16] GUIDE-VALVE (STANDARD)  
  7C-5306 AB GUIDE-VALVE (0.51-MM OS)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP30130048
 

7W-2225: CYLINDER HEAD AS

7W-2225 CYLINDER HEAD AS
PART OF 4P-9350, 4P-9351, 5N-9004, 7C-2947, 7W-4410 KIT-ENGINE PARTS
FIELD REPLACEMENT FOR @@@@@105-3788@@@@@
AN ATTACHMENT
i00093453 SEBP3013
7W2225 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0040 Y [1] CYLINDER HEAD AS  
2. 2N-5775 [8] DOWEL  
3. 173-7188 [16] GUIDE-VALVE (STANDARD)  
  7C-5306 AB GUIDE-VALVE (0.51-MM OS)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP30130049
 

141-1207: CYLINDER HEAD GP

141-1207 CYLINDER HEAD GP
S/N 99U8989-99999
PART OF 273-9999, 4W-7005 CYLINDER HEAD GP
i00567840 SEBP3013
1411207 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0041 Y [1] CYLINDER HEAD AS  
2. 122-0322 [8] VALVE-INLET  
3. 2A-4429 [32] LOCK-RETAINER  
4. 6N-7175 [16] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7154 [1] ROTOCOIL AS  
4A. 6N-7174 [1] SHIELD-OIL  
5. 4N-5906 [16] SPRING-VALVE  
6. 122-0321 [8] VALVE-EXHAUST  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Connecting Rod And Main Bearings Have A Thicker Coating (Layer) Of Lead-Tin Overlay
1981/01/21
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods
1981/07/15
Check Bottom Surface Of Cylinder Liner Flange For Erosion And Wear
1981/11/25
New Cylinder Liners And O-Ring Seals Give Longer Seal Life
1981/12/16
Carbon Build-Up In Combustion And Inlet Areas
1982/04/07
Use Correct Part Numbers For Main And Connecting Rod Bearings
1982/05/12
New Crankshaft Main Bearings Used
1982/05/12
Inspection Marks On Bearings
1982/05/12
New Head Gasket Improves Seal Between Block And Liner Flange
1982/10/20
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1983/01/19
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Damaged Lifter Bores In 3400 Series Engines Can Be Used Again
1983/07/06
New Liner Seat Insert Available
1983/08/17
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/16
New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings
1984/05/16
New Cylinder Block Groups Used
1984/10/03
Install Crankshaft Thrust Bearings Correctly To Avoid Damage
1985/02/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings
1985/12/01
New Cylinder Liner Available
1986/02/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
3400 Engine Major Component Performance Guide Available
1987/07/01
Mid-Life Bearing Maintenance Recommendations
1987/09/01
New Piston Cooling Jets Used
1987/09/01
New Liner Seat Insert Available
1988/12/01
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups
1990/12/01
Service Tips For Piston Cooling Jets (Tubes)
1990/12/01
Cylinder Kits Not Recommended For Use In 3400 Family of Marine Engines
1991/05/01
New Cylinder Kits Available
1992/04/01
Thinner Spacer Plates Available For Parts Service
1992/06/01
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In
1992/08/01
New Liner Seat Inserts Available
1992/11/01
Cylinder Pack Puller Groups Improved
1993/01/01
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/12/01
New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/16
Flywheel Housing To Cylinder Block Joint Improvements{1157,1201}
1997/01/22
New Cylinder Liners
1977/01/28
Improved Main And Connecting Rod Bearings Have Aluminum Alloy With More Strength
1977/01/28
Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15
Clean Bolt Holes In Cylinder Block Before Cylinder Heads Are Installed
1977/07/13
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
External (Outside) Oil Lines Now Used Instead Of The Oil Passage In The Cylinder Block And Flywheel Housing
1978/05/03
New Gasket Installed Between Flywheel Housing And Cylinder Block
1978/05/24
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 7N9013 Gasket Service Group{1101, 1221}
Installation Of 7N9013 Gasket Service Group{1101, 1221}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Technical Information Bulletin
Liner Flange Breakage
Liner Flange Breakage
Specifications
Cylinder Liner
3408B and 3408C Industrial and Marine Engines
Cylinder Liner Projection
3408C and 3412C Marine Engines
Cylinder Block
3408C and 3412C Marine Engines
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Disassembly and Assembly
Camshaft Bearings
3408C & 3412C MARINE ENGINES
Spacer Plates
3408C & 3412C MARINE ENGINES
Piston Cooling Tubes
3408C & 3412C MARINE ENGINES
Cylinder Liners
3408C & 3412C MARINE ENGINES
Crankshaft Main Bearings
3408C & 3412C MARINE ENGINES
Camshaft Bearings
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Spacer Plates
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Piston Cooling Tubes
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Cylinder Liners
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Crankshaft Main Bearings
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Service Magazine
New Connecting Rod And Main Bearings Have A Thicker Coating (Layer) Of Lead-Tin Overlay{1230,1219,1203}
1981/01/19
Crankshaft Failures; New Thrust Plate{1203,1202,1230}
1981/05/04
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Check Bottom Surface Of Cylinder Liner Flange For Erosion And Wear{1216,1201}
1981/11/16
New Cylinder Liners And O-Ring Seals Give Longer Seal Life{1216,1201,1213,1227}
1981/12/14
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Crankshaft Main Bearings Used{1203}
1982/05/10
New Head Gasket Improves Seal Between Block And Liner Flange{1101,1201}
1982/09/27
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Damaged Lifter Bores In 3400 Series Engines Can Be Used Again{1201,0374}
1983/07/04
New Liner Seat Insert Available{1217}
1983/08/15
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings{1211}
1984/05/07
Salvaging Cylinder Block Top Decks After Liner Seat Erosion{1201,1216,1217}
1984/06/04
New Cylinder Block Groups Used{1201}
1984/10/01
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings{1215,1216,7770}
1985/11/11
New Cylinder Liner Available{1201}
1986/02/10
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Cylinder Liners{1216}
1977/01/24
Use New Procedure To Tighten Flywheel Housing Bolts{1157,1201}
1977/07/04
Clean Bolt Holes In Cylinder Block Before Cylinder Heads Are Installed{1101,1201}
1977/08/08
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Stronger Timing Gear Housing; Additional Stud Used At Top Of Housing{1151,1201}
1987/02/23
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Recommendations For Preventing Cooling System Damage {1201}
1987/08/31
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
New Piston Cooling Jets Used {1213,1214}
1987/09/14
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
A Gasket Group Is Available To Give Improved Sealing For The Oil Supply To The Rocker Arms On Early Engines{1101,1102,1221}
1978/04/03
External (Outside) Oil Lines Now Used Instead Of The Oil Passage In The Cylinder Block And Flywheel Housing{1307}
1978/05/01
New Gasket Installed Between Flywheel Housing And Cylinder Block{1157,1201}
1978/05/22
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24
New Liner Seat Insert Available{1201,1216,1217}
1988/11/14
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Design Thrust Plate Used In Crankshaft Group{1201,1202,1203}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Dimensions For Aluminum Washer{1221}
1990/07/23
Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Cylinder Kits Not Recommended For Use In 3400 Family of Marine Engines And D8N Tractors{1214}
1991/05/20
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
New Cylinder Kits Available{1213}
1992/04/13
Thinner Spacer Plates Available For Parts Service{1221}
1992/06/29
New Liner Seat Inserts Available{1217}
1992/11/09
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
New 171-4660 Engine Stand Adapter Assembly Is Now Available {0701, 1000}
2000/04/17

Caterpillar Parts SIS Catalog 3408 :

CYLINDER BLOCK GP
122-8605 CYLINDER BLOCK GP
CYLINDER BLOCK GP
122-8604 CYLINDER BLOCK GP
CYLINDER BLOCK AS
1W-5081 CYLINDER BLOCK AS
CYLINDER BLOCK AS
122-8599 CYLINDER BLOCK AS
CYLINDER BLOCK AS
122-2245 CYLINDER BLOCK AS
CYLINDER BLOCK AS
110-3779 CYLINDER BLOCK AS
CRANKSHAFT GP
223-1481 CRANKSHAFT GP
CRANKSHAFT GP
1W-5010 CRANKSHAFT GP
CYLINDER BLOCK GP
1W-5082 CYLINDER BLOCK GP
CYLINDER BLOCK GP
1W-5084 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4W-6144 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4W-6144 CYLINDER BLOCK GP
CYLINDER HEAD AS
105-3788 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0040 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0041 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2225 CYLINDER HEAD AS

Truck sale:

Caterpillar 3408 IND, Construction
45,000 
Caterpillar 3408 IND, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.