123-8904 WIRING GP-COLD WEATHER -RH S/N 4HZ1-UP PART OF 116-4081 STARTING AR-COLD WEATHER AN ATTACHMENT 5230B

123-8904: WIRING GP-COLD WEATHER

123-8904 WIRING GP-COLD WEATHER -RH
S/N 4HZ1-UP
PART OF 116-4081 STARTING AR-COLD WEATHER
AN ATTACHMENT

Parts for your 5230B MINING EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
2.	8T-4179 M	[3]	BOLT (M12X1.75X20-MM)
3.	8T-4224	[6]	WASHER-HARD (8.8X16X2-MM THK)
4.	5P-4325	[2]	CLIP (LOOP)
5.	3P-9847	[3]	CLIP
6.	1P-7009	[1]	CLIP
7.	1S-0994	[13]	CLIP (LOOP)
8.	7D-7735	[1]	CLIP
9.	4S-4455	[1]	CLIP
10.	092-6025	[8]	CLIP (LOOP)
11.	8R-6583	[3]	CLIP
12.	8R-6584	[3]	CLIP
13.	8T-4136 M	[8]	BOLT (M10X1.5X25-MM)
14.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
15.	8T-4908 M	[2]	BOLT (M8X1.25X25-MM)
16.	8T-4182 M	[1]	BOLT (M10X1.5X45-MM)
17.	5M-3062	[12]	BOLT (3/8-16X0.75-IN)
18.	142-1810	[1]	BOX
19.	142-1809	[1]	RECEPTACLE AS
	8T-9043	[4]	BOLT (5/16-18X0.875-IN)
	122-7154	[1]	GASKET
20.	122-6961	[1]	PLUG AS
	122-7153	[1]	GASKET
21.	8T-4121	[12]	WASHER-HARD (11X21X2.5-MM THK)
22.	9X-9754	[2]	SPRING
23.	7K-1181	[11]	STRAP-CABLE
24.	3B-7257	[1]	BUSHING-REDUCER
25.	8T-4896	[13]	WASHER-HARD (10.2X18.5X2.5-MM THK)
26.	9N-1909	[3]	BRACKET
27.	8T-4133 M	[3]	NUT (M10X1.5-THD)
28.	6V-8801	[3]	NUT (3/8-16-THD)
29.	123-8875	[1]	WIRE AS
30.	123-8877	[1]	WIRE AS
31.	123-8879	[1]	WIRE AS
32.	123-8881	[1]	WIRE AS
33.	123-8883	[1]	WIRE AS
34.	123-8885	[1]	WIRE AS
35.	123-8887	[1]	WIRE AS
36.	123-8873	[1]	WIRE AS
37.	123-8889	[1]	WIRE AS
38.	123-8891	[1]	WIRE AS
39.	123-8893	[1]	WIRE AS
40.	9G-5915	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(150-CM)
41.	109-9913	[1]	BOX AS
	8X-6020	[1]	BOX AS
	8X-4711 M	[2]	BOSS AS (M12X1.75X20-MM)
42.	123-4106	[2]	FUSE (25-AMPERE)
43.	122-2271	[4]	FUSE (20-AMPERE)
44.	8X-6643	[1]	PANEL
45.	7X-0620	[4]	WASHER-HARD (5.5X13X1.6-MM THK)
46.	9F-9327	[4]	SCREW-MACHINE (10-32X0.375-IN)
47.	9X-0259	[1]	GASKET
48.	8X-7174	[1]	PLATE
49.	7X-3349	[4]	SCREW-HEX HEAD (12-24X0.75-IN)
50.	4B-2051	[4]	NUT (12X24-THD)
51.	5N-5536	[6]	BLOCK-FUSE (250-VOLT AC)
52.	8C-7507	[28]	LOCKWASHER
53.	8T-6693 M	[24]	SCREW-MACHINE (M5X0.8X16-MM)
54.	5C-2874 M	[28]	NUT (M5X0.8-THD)
55.	8T-4189 M	[4]	BOLT (M8X1.25X20-MM)
56.	123-4107	[2]	WIRE AS
57.	123-4108	[2]	WIRE AS
58.	6V-7978	[7]	SCREW-MACHINE (10-32X0.375-IN)
59.	121-9292	[1]	WIRE AS
60.	6Y-6815	[10]	GASKET AS (CONNECTOR)
61.	9X-8194	[4]	JUMPER-STRIP
62.	8T-0289 M	[4]	BOLT (M5X0.8X20-MM)
63.	4K-6498	[1]	BLOCK AS-TERMINAL
	6V-8363	[12]	SCREW (10-32X0.312-IN)
64.	2V-8652	[7]	SPACER (6.75X10.32X10-MM THK)
65.	8L-7593	[1]	BUSHING-TERMINAL
66.	4B-4863	[7]	WASHER (4.7X11X1.2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

146-9710: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

146-9710 WIRING GP-ELECTRONIC CONTROL
S/N 4HZ1-233
PART OF 178-7178 RISER AR-CAB

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	204-0625 Y	[1]	APPLICATION GP-MONITOR (VIMS)
2.	2M-4004	[1]	BUTTON-PLUG
3.	3S-2093	[13]	STRAP-CABLE
4.	3V-4784	[2]	BLOCK-FUSE
			(EACH INCLUDES)
	3L-8187	[20]	LOCKWASHER
	8F-5734	[20]	SCREW-MACHINE (6-32X0.187-IN)
5.	4V-4164	[4]	BUSHING-TERMINAL
6.	6D-9331	[4]	WASHER (5X9X74-MM THK)
7.	6G-2263	[2]	SPACER (10.5X19X28.5-MM THK)
8.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
9.	6Y-6584	[1]	STRAP AS-GROUND
10.	7I-5312	[2]	STRIP (2-MM THK)
11.	7I-5336	[1]	BRACKET
12.	7K-1181	[8]	STRAP-CABLE
13.	8X-5804	[1]	STRAP AS-GROUND
14.	9F-8125	[4]	LOCKWASHER
15.	103-5973	[1]	CABLE AS (4-GA, RED)
	8T-5346		TUBE-HEAT SHRINK (19.1-MM DIA)(3CM)
16.	108-7678	[1]	WIRE AS (8-GA)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
17.	108-7682	[1]	BRACKET
18.	124-6704 L	[1]	RESISTOR AS (ETHER SOLENOID LOAD)
	3E-3365 N	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	5P-6008 D		TUBE-HEAT SHRINK (6.35-MM DIA)(.1M)
	8C-3334	[1]	RIVET-TUBULAR
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
19.	125-4192	[1]	PLATE
20.	125-6794 LY	[1]	LAMP GP-VIMS SERVICE INDICATOR
21.	125-7805	[1]	DOOR AS
22.	125-7806	[1]	COVER AS
	6V-9632 M	[3]	NUT-WELD (M6X1-THD)
	8X-3869	[2]	HINGE
23.	135-0745	[1]	PLUG AS-CODE (CODE PLUG)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS & WEDGE)
	5P-5677		WIRE (18-GA, BLACK)(30DM)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
24.	144-3010	[1]	WIRE AS
25.	144-3011	[1]	WIRE AS
26.	167-0138 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)
27.	184-6078	[1]	BOX AS
28.	191-2937 Y	[1]	APPLICATION GP-MACHINE (MACHINE CONTROL)
29.	203-8151	[1]	HARNESS AS-CONTROL (ELECTRONICS BAY)(E-BAY)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS & WEDGE)
30.	203-8161	[1]	HARNESS AS (RISER)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
31.	032-4000	[4]	SCREW (6-32X0.5-IN)
32.	106-8704 L	[1]	SUPPRESSOR AS-ARC
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	3E-3365 N	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
33.	114-5333 L	[1]	SWITCH AS-PRESSURE (HIGH LOW)(A/C)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	3E-3365 N	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
34.	124-8098	[1]	LATCH AS
	125-7875		TUBE-HEAT SHRINK (7.44-MM DIA)(10CM)
	155-2258	[1]	WEDGE-PLUG LOCK (12-PIN)
	155-2259	[1]	WEDGE-PLUG LOCK (8-PIN)
	155-2261	[4]	WEDGE-PLUG LOCK (2-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
35.	125-8176	[1]	CAM-LATCH
36.	130-5300	[4]	CLIP
37.	2F-0951	[2]	LOCKWASHER
38.	3E-5239	[1]	RELAY AS (24-VOLT)(ETHER HOLD)
39.	171-2212	[1]	CIRCUIT BREAKER AS (105-AMPERE)(ALTERNATOR)
	1H-3244	[2]	LOCKWASHER
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
40.	3K-8782	[6]	FUSE (10-AMPERE)(LOCATION MARKED Y)
41.	4B-1255	[2]	SCREW-MACHINE (1/4-20X0.75-IN)
42.	4F-5644	[2]	NUT-FULL (1/4-20-THD)
43.	4M-7470	[2]	GROMMET
44.	4P-7429	[1]	CLIP (LADDER)
45.	4P-7581	[3]	CLIP (LADDER)
46.	4S-4455	[1]	CLIP
47.	5C-2890 M	[3]	NUT (M6X1-THD)
48.	5C-9553 M	[13]	BOLT (M6X1X16-MM)
49.	5P-7848 M	[4]	NUT (M4X0.7-THD)
50.	6D-4636	[6]	CLIP (LOOP)
51.	6T-3642	[1]	CIRCUIT BREAKER AS (10-AMPERE)(KEY SWITCH)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
52.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(ENG CONTROL)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
53.	6V-1889	[5]	CLIP (LOOP)
54.	6V-3964	[8]	WASHER-HARD (8.8X25.5X5-MM THK)
55.	6V-7978	[4]	SCREW-MACHINE (10-32X0.375-IN)
56.	171-2212	[1]	CIRCUIT BREAKER AS (105-AMPERE)(MAIN)
57.	7X-7729	[3]	WASHER (11X25X3-MM THK)
58.	8D-2676	[1]	SWITCH AS-TOGGLE (SINGLE POLE)(SUBSTRUCTURE LAMP)
	3L-8187	[2]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[2]	SCREW-MACHINE (6-32X0.25-IN)
59.	8M-8948	[3]	FUSE (15-AMPERE)(LOCATION MARKED X)
60.	8P-8540	[1]	GROMMET
61.	8T-4121	[39]	WASHER-HARD (11X21X2.5-MM THK)
62.	8T-4133 M	[4]	NUT (M10X1.5-THD)
63.	8T-4136 M	[10]	BOLT (M10X1.5X25-MM)
64.	8T-4137 M	[27]	BOLT (M10X1.5X20-MM)
65.	8T-4179 M	[4]	BOLT (M12X1.75X20-MM)
66.	8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
67.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
68.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
69.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
70.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
71.	8T-6912 M	[4]	BOLT (M8X1.25X50-MM)
72.	8T-9655	[16]	MOUNT-ISOLATION
73.	9M-8406	[11]	CLIP (LOOP)
74.	9N-0869	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
75.	9X-2606 M	[2]	SCREW-ROUND HEAD (M4X0.7X30-MM)
76.	9X-7378	[1]	SEAL-O-RING
77.	9X-8256	[16]	WASHER (6.6X12X2-MM THK)
78.	9X-8486	[4]	SCREW-MACHINE (8-32X0.75-IN)
79.	5P-7211 J		SEAL (4DM)
80.	8T-6870 M	[4]	BOLT (M8X1.25X70-MM)
81.	145-0487	[4]	SPACER (8.2X12.7X43.6-MM)
82.	4D-7388	[2]	CLIP (LOOP)
83.	3E-5239	[1]	RELAY AS (24-VOLT)(ETHER START)
84.	3E-5239	[1]	RELAY AS (24-VOLT)(BOOM FLOAT)
85.	3E-5239	[1]	RELAY AS (24-VOLT)(AUTOLOBE)
	D		ORDER BY THE METER
	J		ORDER BY THE DECIMETER
	L		KIT MARKED L SERVICES PART(S) MARKED L
	M		METRIC PART
	N		KIT MARKED N INCLUDES PART N
	Y		SEPARATE ILLUSTRATION

146-9710: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

146-9710 WIRING GP-ELECTRONIC CONTROL
S/N 4HZ234-UP
PART OF 178-7178 RISER AR-CAB

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	204-0625 Y	[1]	APPLICATION GP-MONITOR (VIMS)
2.	2M-4004	[1]	BUTTON-PLUG
3.	3S-2093 C	[10]	STRAP-CABLE
4.	3V-4784	[2]	BLOCK-FUSE
			(EACH INCLUDES)
	3L-8187	[20]	LOCKWASHER
	8F-5734	[20]	SCREW-MACHINE (6-32X0.187-IN)
5.	4V-4164	[4]	BUSHING-TERMINAL
6.	6D-9331	[4]	WASHER (5X9X74-MM THK)
7.	6G-2263	[2]	SPACER (10.5X19X28.5-MM THK)
8.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
9.	6Y-6584	[1]	STRAP AS-GROUND
10.	7I-5312	[2]	STRIP (2-MM THK)
11.	7I-5336	[1]	BRACKET
12.	7K-1181	[8]	STRAP-CABLE
13.	8X-5804	[1]	STRAP AS-GROUND
14.	9F-8125	[4]	LOCKWASHER
15.	103-5973	[1]	CABLE AS (4-GA, RED)
	5P-3454	[2]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
	6V-2369 BD		CABLE (4-GA, BLACK)
	8T-5346 BE		TUBE-HEAT SHRINK (19.1-MM DIA)
16.	108-7678	[1]	WIRE AS (8-GA)
17.	108-7682	[1]	BRACKET
18.	124-6704	[1]	RESISTOR AS (ETHER SOLENOID LOAD)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	5P-5623 BD		WIRE-ELECTRICAL (16-GA, BLACK)
	5P-6008 BD		TUBE-HEAT SHRINK (6.35-MM DIA)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8C-3334	[1]	RIVET-TUBULAR
19.	125-4192	[1]	PLATE
20.	125-6794 Y	[1]	LAMP GP-VIMS SERVICE INDICATOR
21.	125-7805	[1]	DOOR AS
22.	125-7806	[1]	COVER AS
	6V-9632 M	[3]	NUT-WELD (M6X1-THD)
	8X-3869	[2]	HINGE
23.	135-0745	[1]	PLUG AS-CODE
	102-8805	[2]	KIT-RECEPTACLE (6-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	5P-5677 BD		WIRE (18-GA, BLACK)
	9G-3695	[3]	PLUG-SEAL
24.	144-3010	[1]	WIRE AS
25.	144-3011	[1]	WIRE AS
26.	167-0138 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)
27.	184-6078	[1]	BOX AS
28.	191-2937 Y	[1]	APPLICATION GP-MACHINE (MACHINE CONTROL)
29.	203-8151	[1]	HARNESS AS-CONTROL (ELECTRONICS BAY)
	9X-1054	[4]	PLUG AS-CONNECTOR (4-PIN)
	147-1445	[1]	PLUG AS-CONNECTOR (70-PIN)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	3T-3044	[1]	PLUG AS-CONNECTOR (25-PIN)
	8N-1514	[2]	PLUG AS-CONNECTOR (37-PIN)
	8N-1518	[1]	PLUG AS-CONNECTOR (25-PIN)
	110-6848	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6848	[1]	PLUG AS-CONNECTOR (40-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
30.	228-9107	[1]	HARNESS AS-CHASSIS (RISER)
	3T-3412	[1]	PLUG AS-CONNECTOR (37-PIN)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
31.	032-4000	[4]	SCREW (6-32X0.5-IN)
33.	114-5333	[1]	SWITCH AS-PRESSURE (HIGH LOW)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1386 BE		SLEEVE
34.	124-8098	[1]	LATCH AS
35.	125-8176	[1]	CAM-LATCH
36.	130-5300	[6]	CLIP
37.	2F-0951	[2]	LOCKWASHER
39.	171-2212	[1]	CIRCUIT BREAKER AS (105-AMPERE)(ALTERNATOR)
39A.	171-2212	[1]	CIRCUIT BREAKER AS (105-AMPERE)(MAIN)
			(EACH INCLUDES)
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	253-2111	[2]	LOCKWASHER
40.	3K-8782	[1]	FUSE (10-AMPERE)(DOME LIGHT)
40A.	3K-8782	[1]	FUSE (10-AMPERE)(LADDER LIGHTS)
40B.	3K-8782	[1]	FUSE (10-AMPERE)(HYDRAULIC OIL COOLER)
40C.	3K-8782	[1]	FUSE (10-AMPERE)(ENGINE COMPARTMENT LIGHTS)
40D.	3K-8782	[1]	FUSE (10-AMPERE)(AIR DRYER)
40E.	3K-8782	[1]	FUSE (10-AMPERE)(MACHINE CONTROL)
41.	4B-1255	[2]	SCREW-MACHINE (1/4-20X0.75-IN)
42.	4F-5644	[2]	NUT-FULL (1/4-20-THD)
43.	4M-7470	[2]	GROMMET
45.	4P-7581	[2]	CLIP (LADDER)
46.	4S-4455	[1]	CLIP
47.	5C-2890 M	[3]	NUT (M6X1-THD)
48.	5C-9553 M	[13]	BOLT (M6X1X16-MM)
49.	5P-7848 M	[4]	NUT (M4X0.7-THD)
50.	6D-4636	[6]	CLIP (LOOP)
51.	6T-3642	[1]	CIRCUIT BREAKER AS (10-AMPERE)(KEY SWITCH)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
52.	6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)(ENG CONTROL)
	6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
	9B-7233	[2]	LOCKWASHER
53.	6V-1889	[5]	CLIP (LOOP)
54.	6V-3964	[8]	WASHER-HARD (8.8X25.5X5-MM THK)
55.	6V-7978	[4]	SCREW-MACHINE (10-32X0.375-IN)
57.	7X-7729	[3]	WASHER (11X25X3-MM THK)
58.	8D-2676	[1]	SWITCH AS-TOGGLE (SINGLE POLE)(SUBSTRUCTURE LAMP)
	3L-8187	[2]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[2]	SCREW-MACHINE (6-32X0.25-IN)
59.	8M-8948	[1]	FUSE (15-AMPERE)(AUXILIARY POWER)
59A.	8M-8948	[1]	FUSE (15-AMPERE)(BOOM FLOAT)
59B.	8M-8948	[1]	FUSE (15-AMPERE)(VIMS)
60.	8P-8540	[1]	GROMMET
61.	8T-4121	[40]	WASHER-HARD (11X21X2.5-MM THK)
62.	8T-4133 M	[4]	NUT (M10X1.5-THD)
63.	8T-4136 M	[10]	BOLT (M10X1.5X25-MM)
64.	8T-4137 M	[28]	BOLT (M10X1.5X20-MM)
65.	8T-4179 M	[4]	BOLT (M12X1.75X20-MM)
66.	8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
67.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
68.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
69.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
70.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
71.	8T-6912 M	[4]	BOLT (M8X1.25X50-MM)
72.	8T-9655	[16]	MOUNT-ISOLATION
73.	9M-8406	[11]	CLIP (LOOP)
74.	9N-0869	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
75.	9X-2606 M	[2]	SCREW-ROUND HEAD (M4X0.7X30-MM)
76.	9X-7378	[2]	SEAL-O-RING
77.	9X-8256	[16]	WASHER (6.6X12X2-MM THK)
78.	9X-8486	[4]	SCREW-MACHINE (8-32X0.75-IN)
79.	5P-7211 BD		SEAL
80.	8T-6870 M	[4]	BOLT (M8X1.25X70-MM)
81.	145-0487	[4]	SPACER (8.2X12.7X43.6-MM)
82.	4D-7388	[2]	CLIP (LOOP)
83.	3E-5239	[1]	RELAY AS (24-VOLT)(ETHER START)
83A.	3E-5239	[1]	RELAY AS (24-VOLT)(BOOM FLOAT)
83B.	3E-5239	[1]	RELAY AS (24-VOLT)(AUTOLOBE)
83C.	3E-5239	[1]	RELAY AS (24-VOLT)(ETHER HOLD)
84.	169-7443	[1]	TIMER AS-ON DELAY (24-VOLT)
	186-3735	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
85.	149-6371	[1]	SWITCH AS-PRESSURE (A/C COMPRESSOR CLUTCH)(AIR CONDITIONER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

146-9714: WIRING GP-ENCLOSURE

WIRING GP-ENCLOSURE

146-9714 WIRING GP-ENCLOSURE -LH
S/N 4HZ1-UP
PART OF 146-7565 ENCLOSURE AR

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[28]	STRAP-CABLE
2.	5B-2183	[1]	NUT-JAM (9/16-18-THD)
3.	6G-2263	[2]	SPACER (10.5X19X28.5-MM THK)
4.	7K-1181	[5]	STRAP-CABLE
5.	7G-1060	[1]	STRAP AS-GROUND
6.	9X-3495	[2]	CLIP AS
			(EACH INCLUDES)
	8C-3334	[2]	RIVET-TUBULAR
7.	102-1400 Y	[1]	SENSOR GP-PRESSURE (AUTO LUBE)
8.	109-2119	[1]	GUARD AS
9.	112-6797	[1]	PLATE
10.	112-6943	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
11.	118-3909 Y	[1]	SENSOR GP-TEMPERATURE (AMBIENT AIR)
12.	118-5051	[1]	PLATE
13.	140-9815	[1]	PLATE
14.	153-2073 Y	[1]	LAMP GP-FLOOD (24-VOLT)
15.	174-7165 Y	[1]	SWITCH GP-POSITION (DROP DOWN LADDER)
16.	179-3258	[1]	HARNESS AS (LH ENCLOSURE)
17.	217-0144	[1]	HARNESS AS (LH ENCLOSURE)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
18.	033-8248	[7]	CLIP (LOOP)
19.	115-0617	[1]	BRACKET
20.	139-2116	[1]	SWITCH GP-TOGGLE (LADDER LAMP)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
21.	171-5672 Y	[1]	LAMP GP (24-VOLT)(LH ENCLOSURE)
22.	1S-0994	[3]	CLIP (LOOP)
23.	3E-5169	[1]	GUARD-SWITCH (RED)(ENGINE SHUTOFF)
24.	4D-7794	[4]	CLIP
25.	4H-2558	[1]	GROMMET
26.	4K-8864	[7]	CLIP (LOOP)
27.	4P-7581	[3]	CLIP (LADDER)
28.	4S-4455	[7]	CLIP
29.	5C-2890 M	[3]	NUT (M6X1-THD)
30.	5P-7468	[1]	CLIP (SLOT)
31.	5P-7469	[1]	CLIP (TAB)
32.	5P-9085	[5]	CLIP (LOOP)
33.	6D-4246	[9]	CLIP (LOOP)
34.	6D-4636	[1]	CLIP (LOOP)
35.	6V-8918	[2]	BOLT (5/16-18X1.25-IN)
36.	6V-9189 M	[1]	LOCKNUT (M8X1.25-THD)(M8X1.25 THD)
37.	7J-0204	[1]	SEAL-O-RING
38.	8D-2676	[1]	SWITCH AS-TOGGLE (SINGLE POLE)(COMPARTMENT LAMP)
	3L-8187	[2]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[2]	SCREW-MACHINE (6-32X0.25-IN)
39.	8M-2770	[2]	CLIP (LOOP)
40.	8P-8540	[1]	GROMMET
41.	8T-4121	[58]	WASHER-HARD (11X21X2.5-MM THK)
42.	8T-4133 M	[2]	NUT (M10X1.5-THD)
43.	8T-4136 M	[13]	BOLT (M10X1.5X25-MM)
44.	8T-4137 M	[31]	BOLT (M10X1.5X20-MM)
45.	8T-4179 M	[3]	BOLT (M12X1.75X20-MM)
46.	8T-4186 M	[4]	BOLT (M10X1.5X40-MM)
47.	8T-4178 M	[6]	BOLT (M10X1.5X90-MM)
48.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
49.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
50.	8T-6466 M	[2]	BOLT (M10X1.5X60-MM)
51.	8T-6869 M	[1]	BOLT (M8X1.25X60-MM)
52.	8T-7087	[1]	GROMMET (34-MM ID)
53.	9X-8256	[3]	WASHER (6.6X12X2-MM THK)
54.	139-2116	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTOFF)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
55.	9V-0999	[6]	SPACER (13.8X30X50-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

200-8017: WIRING GP-ENCLOSURE

WIRING GP-ENCLOSURE

200-8017 WIRING GP-ENCLOSURE -HOOD-RH
S/N 4HZ1-UP
PART OF 168-7939 HOOD & GUARD AR, 224-7156 HOOD GP

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2V-3173	[2]	ADAPTER (14.27-MM HEX)
2.	3S-2093	[66]	STRAP-CABLE
3.	7K-1181	[1]	STRAP-CABLE
4.	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
5.	8D-9537	[1]	CAP-DUST
6.	8T-9658	[4]	SPACER (8.2X12.7X25.4-MM THK)
7.	9G-9150	[1]	CLIP
8.	9U-2277	[2]	CLIP AS
9.	100-4311 Y	[1]	SENSOR GP-PRESSURE (PUMP DRIVE LUBRICATION)
10.	108-7696	[2]	BAR
11.	109-1093	[1]	BRACKET
12.	144-7172 Y	[1]	MODULE GP-VIDS/VIMS INTERFACE
13.	149-3006	[1]	ADAPTER AS
	8L-2779	[1]	SEAL-O-RING
	8L-2786	[1]	SEAL-O-RING
14.	165-6634 Y	[1]	SENSOR GP-COOLANT LEVEL (AFTERCOOLER)
15.	170-6105 Y	[1]	SENSOR GP-PRESSURE (SWING)
16.	176-1079	[1]	HARNESS AS (UPPER PUMP ROOM)
17.	177-4457	[1]	HARNESS AS (FAN & FILTER PRESSURE SWITCHES)
18.	130-5300	[2]	CLIP
19.	139-2116	[1]	SWITCH GP-TOGGLE (ENGINE SHUT-OFF)
	3E-3371 J	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803 J	[1]	KIT-RECEPTACLE (3-PIN)
20.	161-9926 Y	[2]	SENSOR GP-PRESSURE (LH & RH TURBO INLET AIR)
21.	161-9932 Y	[1]	SENSOR GP-PRESSURE (POWER SHIFT)
22.	171-5672 Y	[4]	LAMP GP (24-VOLT)(RH ENCLOSURE)
23.	3C-6969 M	[8]	NUT (M3X0.5-THD)
24.	3E-5169	[1]	GUARD-SWITCH (RED)
25.	3E-7410	[1]	TEE
26.	3J-1907	[1]	SEAL-O-RING
27.	3J-7354	[6]	SEAL-O-RING
28.	4B-2043	[4]	NUT (8-32-THD)
29.	4B-4863	[8]	WASHER (4.7X11X1.2-MM THK)
30.	4H-2558	[10]	GROMMET
31.	4P-7429	[5]	CLIP (LADDER)
32.	4P-7581	[8]	CLIP (LADDER)
33.	4P-8134	[6]	CLIP (LADDER)
34.	5C-2890 M	[12]	NUT (M6X1-THD)
35.	5P-4115	[4]	WASHER-HARD (7.2X19X2-MM THK)
36.	5P-7468	[2]	CLIP (SLOT)
37.	5P-7469	[2]	CLIP (TAB)
38.	5P-8394	[4]	SCREW-MACHINE (8-32X0.75-IN)
39.	6V-8397	[1]	SEAL-O-RING
40.	6V-9505 M	[8]	SCREW-MACHINE (M3X0.5X25-MM)
41.	8D-2676	[1]	SWITCH AS-TOGGLE (SINGLE POLE)(LAMP)(PUMP FILTER ENCLOSURE)
	3L-8187	[2]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[2]	SCREW-MACHINE (6-32X0.25-IN)
42.	8M-2770	[1]	CLIP (LOOP)
43.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
44.	8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
45.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
46.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
47.	8T-6912 M	[4]	BOLT (M8X1.25X50-MM)
48.	8T-7087	[2]	GROMMET (34-MM ID)
49.	8T-9655	[8]	MOUNT-ISOLATION
50.	9N-0869	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
51.	9X-0261	[1]	ADAPTER
52.	9X-8256	[8]	WASHER (6.6X12X2-MM THK)
53.	7X-7729	[1]	WASHER (11X25X3-MM THK)
54.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
55.	9X-3495	[1]	CLIP AS
56.	165-6634 Y	[1]	SENSOR GP-COOLANT LEVEL (RADIATOR)
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

200-8017: WIRING GP-ENCLOSURE

WIRING GP-ENCLOSURE

200-8017 WIRING GP-ENCLOSURE -RH
S/N 4HZ232-UP
PART OF 224-7156 HOOD GP

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2V-3173	[2]	ADAPTER (14.27-MM HEX)
2.	3S-2093	[66]	STRAP-CABLE
3.	7K-1181 C	[3]	STRAP-CABLE
4.	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
5.	8D-9537	[1]	CAP-DUST
6.	8T-9658	[4]	SPACER (8.2X12.7X25.4-MM THK)
7.	9G-9150	[1]	CLIP
8.	9U-2277	[2]	CLIP AS
9.	100-4311 Y	[1]	SENSOR GP-PRESSURE (PUMP DRIVE LUBRICATION)
10.	108-7696	[2]	BAR
11.	109-1093	[1]	BRACKET
12.	144-7172 Y	[1]	MODULE GP-VIDS/VIMS INTERFACE
13.	149-3006	[1]	ADAPTER AS
	8L-2779	[1]	SEAL-O-RING
	8L-2786	[1]	SEAL-O-RING
14.	239-9957 CY	[1]	SENSOR GP-LIQUID LEVEL (AFTERCOOLER)
14A.	239-9957 CY	[1]	SENSOR GP-LIQUID LEVEL (RADIATOR)
15.	170-6105 Y	[1]	SENSOR GP-PRESSURE (SWING)
16.	176-1079	[1]	HARNESS AS (UPPER PUMP ROOM)
17.	177-4457	[1]	HARNESS AS (FAN & FILTER PRESSURE SWITCHES)
18.	130-5300	[2]	CLIP
19.	139-2116	[1]	SWITCH GP-TOGGLE (ENGINE SHUT-OFF)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
20.	161-9926 Y	[2]	SENSOR GP-PRESSURE (LH & RH TURBO INLET AIR)
21.	161-9932 Y	[1]	SENSOR GP-PRESSURE (POWER SHIFT)
22.	171-5672 Y	[4]	LAMP GP (24-VOLT)(RH ENCLOSURE)
23.	3C-6969 M	[8]	NUT (M3X0.5-THD)
24.	3E-5169	[1]	GUARD-SWITCH (RED)
25.	3E-7410	[1]	TEE
26.	3J-1907	[1]	SEAL-O-RING
27.	3J-7354	[6]	SEAL-O-RING
28.	4B-2043	[4]	NUT (8-32-THD)
29.	4B-4863	[8]	WASHER (4.7X11X1.2-MM THK)
30.	4H-2558	[10]	GROMMET
31.	4P-7429	[5]	CLIP (LADDER)
32.	4P-7581	[8]	CLIP (LADDER)
33.	4P-8134	[6]	CLIP (LADDER)
34.	5C-2890 M	[12]	NUT (M6X1-THD)
35.	5P-4115	[4]	WASHER-HARD (7.2X19X2-MM THK)
36.	5P-7468	[2]	CLIP (SLOT)
37.	5P-7469	[2]	CLIP (TAB)
38.	5P-8394	[4]	SCREW-MACHINE (8-32X0.75-IN)
39.	6V-8397	[1]	SEAL-O-RING
40.	6V-9505 M	[8]	SCREW-MACHINE (M3X0.5X25-MM)
41.	8D-2676	[1]	SWITCH AS-TOGGLE (SINGLE POLE)(LAMP)(PUMP FILTER ENCLOSURE)
	3L-8187	[2]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[2]	SCREW-MACHINE (6-32X0.25-IN)
42.	8M-2770	[1]	CLIP (LOOP)
43.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
44.	8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
45.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
46.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
47.	8T-6912 M	[4]	BOLT (M8X1.25X50-MM)
48.	8T-7087	[2]	GROMMET (34-MM ID)
49.	8T-9655	[8]	MOUNT-ISOLATION
50.	9N-0869	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
51.	9X-0261	[1]	ADAPTER
52.	9X-8256	[8]	WASHER (6.6X12X2-MM THK)
53.	7X-7729	[1]	WASHER (11X25X3-MM THK)
54.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
55.	9X-3495	[1]	CLIP AS
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

200-8018: WIRING GP-ENCLOSURE

WIRING GP-ENCLOSURE

200-8018 WIRING GP-ENCLOSURE -RH
S/N 4HZ1-233
PART OF 146-7566 ENCLOSURE AR

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-7922	[4]	SPACER (0.531X0.94X0.875-IN THK)
2.	3S-2093	[9]	STRAP-CABLE
3.	6G-2263	[1]	SPACER (10.5X19X28.5-MM THK)
4.	6Y-6584	[1]	STRAP AS-GROUND
5.	7K-1181	[2]	STRAP-CABLE
6.	8W-1034	[1]	HOLD-DOWN AS-BATTERY
7.	8X-7847	[4]	ROD
8.	9X-3495	[2]	CLIP AS
9.	100-3055 Y	[1]	SENSOR GP-TEMPERATURE (PUMP DRIVE)
10.	109-2119	[1]	GUARD AS
11.	110-5991	[1]	CABLE AS (BATTERY DISCONNECT SWITCH)
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(19CM)
	9X-9825	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
12.	111-0871	[1]	CABLE AS (BATTERY POSITIVE)
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(48CM)
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
13.	112-6805	[1]	CABLE AS (BATTERY NEGATIVE)
	9G-4336	[1]	TERMINAL-RING (4-GA, 3/8-IN SCREW)
	6T-0465	[1]	COVER-TERMINAL (BLACK)
	6V-2369 D		CABLE (4-GA, BLACK)(.5M)
	158-4610	[1]	TERMINAL AS (NEGATIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
	7N-5274	[1]	COVER AS-TERMINAL (BLACK)
	8L-8413	[1]	STRAP-CABLE (WHITE)
14.	141-5746 Y	[1]	SENSOR GP-PRESSURE (AIR TANK)
15.	153-2073 Y	[1]	LAMP GP-FLOOD (24-VOLT)
16.	176-3202	[1]	HARNESS AS (FRONT ENGINE INERFACE)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
17.	213-4844	[1]	HARNESS AS (LOWER FRAME)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
18.	033-8248	[2]	CLIP (LOOP)
19.	115-0617	[1]	BRACKET
20.	129-3180 M	[4]	LOCKNUT (M12X1.75-THD)
21.	130-5300	[1]	CLIP
22.	1S-0994	[4]	CLIP (LOOP)
23.	1S-6420	[1]	CLIP
24.	3J-1907	[1]	SEAL-O-RING
25.	4D-7733	[1]	CLIP (LOOP)
26.	4D-7794	[1]	CLIP
27.	4K-8864	[2]	CLIP (LOOP)
28.	4P-7581	[1]	CLIP (LADDER)
29.	4P-8134	[1]	CLIP (LADDER)
30.	5P-7468	[1]	CLIP (SLOT)
31.	5P-7469	[1]	CLIP (TAB)
32.	5P-9085	[11]	CLIP (LOOP)
33.	6D-1641	[1]	CLIP (LOOP)
34.	6D-4244	[6]	CLIP (LOOP)
35.	6V-1889	[3]	CLIP (LOOP)
36.	6V-8801	[1]	NUT (3/8-16-THD)
37.	6V-9189 M	[1]	LOCKNUT (M8X1.25-THD)
38.	7N-0718 Y	[1]	SWITCH GP-DISCONNECT (BATTERY)
39.	8D-1470	[1]	GROMMET
40.	8M-2773	[5]	CLIP (LOOP)
41.	8T-4121	[49]	WASHER-HARD (11X21X2.5-MM THK)
42.	8T-4133 M	[2]	NUT (M10X1.5-THD)
43.	8T-4136 M	[12]	BOLT (M10X1.5X25-MM)
44.	8T-4137 M	[29]	BOLT (M10X1.5X20-MM)
45.	8T-4179 M	[3]	BOLT (M12X1.75X20-MM)
46.	8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
47.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
48.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
49.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
50.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
51.	8T-4244 M	[5]	NUT (M12X1.75-THD)
52.	8T-6869 M	[1]	BOLT (M8X1.25X60-MM)
53.	8T-7087	[1]	GROMMET (34-MM ID)
54.	9G-0549	[1]	CABLE AS (SERIES JUMPER)
	8C-5917	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[2]	BOLT (5/16-18X1.375-IN)
	1M-6120	[2]	NUT (5/16-18-THD)
	5P-0747 E		CABLE (00-GA, BLACK)(20CM)
	8T-9757	[1]	TERMINAL AS-BATTERY (NEGATIVE)
	9G-0003	[1]	COVER AS-TERMINAL (BLACK)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	9G-0004	[1]	COVER AS-TERMINAL (RED)
	8L-8413	[1]	STRAP-CABLE (WHITE)
55.	9M-8406	[9]	CLIP (LOOP)
56.	9W-0742 Y	[1]	BLOCK GP-JUNCTION (BATTERY)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

200-8018: WIRING GP-ENCLOSURE

WIRING GP-ENCLOSURE

200-8018 WIRING GP-ENCLOSURE -RH
S/N 4HZ234-UP
PART OF 146-7566 ENCLOSURE AR

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-7922	[4]	SPACER (0.531X0.94X0.875-IN THK)
2.	3S-2093	[9]	STRAP-CABLE
3.	6G-2263	[1]	SPACER (10.5X19X28.5-MM THK)
4.	6Y-6584	[1]	STRAP AS-GROUND
5.	7K-1181	[2]	STRAP-CABLE
6.	8W-1034	[1]	HOLD-DOWN AS-BATTERY
7.	8X-7847	[4]	ROD
8.	9X-3495	[2]	CLIP AS
9.	100-3055 Y	[1]	SENSOR GP-TEMPERATURE (PUMP DRIVE)
10.	109-2119	[1]	GUARD AS
11.	110-5991	[1]	CABLE AS (BATTERY DISCONNECT SWITCH)
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(19CM)
	9X-9825	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
12.	111-0871	[1]	CABLE AS (BATTERY POSITIVE)
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(48CM)
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119 E	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
13.	7Y-5547 C	[1]	CABLE AS (BATTERY NEGATIVE)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747		CABLE (00-GA, BLACK)(56-CM)
	7N-5274	[1]	COVER AS-TERMINAL (BLACK)
	9G-8909	[1]	COVER-TERMINAL (BLACK)
	3S-6050		TERMINAL AS-BATTERY (NEGATIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
14.	141-5746 Y	[1]	SENSOR GP-PRESSURE (AIR TANK)
15.	153-2073 Y	[1]	LAMP GP-FLOOD (24-VOLT)
16.	176-3202	[1]	HARNESS AS (FRONT ENGINE INERFACE)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
17.	226-0320 C	[1]	HARNESS AS (LOWER FRAME)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
	102-8806	[2]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2265	[2]	KIT-CONNECTING PLUG (8-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
18.	033-8248	[2]	CLIP (LOOP)
19.	115-0617	[1]	BRACKET
20.	129-3180 M	[4]	LOCKNUT (M12X1.75-THD)
21.	130-5300	[1]	CLIP
22.	1S-0994	[4]	CLIP (LOOP)
23.	1S-6420	[1]	CLIP
24.	3J-1907	[1]	SEAL-O-RING
25.	4D-7733	[1]	CLIP (LOOP)
26.	4D-7794	[1]	CLIP
27.	4K-8864	[2]	CLIP (LOOP)
28.	4P-7581	[1]	CLIP (LADDER)
29.	4P-8134	[1]	CLIP (LADDER)
30.	5P-7468	[1]	CLIP (SLOT)
31.	5P-7469	[1]	CLIP (TAB)
32.	5P-9085	[11]	CLIP (LOOP)
33.	6D-1641	[1]	CLIP (LOOP)
34.	6D-4244	[6]	CLIP (LOOP)
35.	6V-1889	[3]	CLIP (LOOP)
36.	6V-8801	[1]	NUT (3/8-16-THD)
37.	6V-9189 M	[1]	LOCKNUT (M8X1.25-THD)
38.	7N-0718 Y	[1]	SWITCH GP-DISCONNECT (BATTERY)
39.	8D-1470	[1]	GROMMET
40.	8M-2773	[5]	CLIP (LOOP)
41.	8T-4121	[49]	WASHER-HARD (11X21X2.5-MM THK)
42.	8T-4133 M	[2]	NUT (M10X1.5-THD)
43.	8T-4136 M	[12]	BOLT (M10X1.5X25-MM)
44.	8T-4137 M	[29]	BOLT (M10X1.5X20-MM)
45.	8T-4179 M	[3]	BOLT (M12X1.75X20-MM)
46.	8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
47.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
48.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
49.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
50.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
51.	8T-4244 M	[5]	NUT (M12X1.75-THD)
52.	8T-6869 M	[1]	BOLT (M8X1.25X60-MM)
53.	8T-7087	[1]	GROMMET (34-MM ID)
54.	118-1277 C	[1]	CABLE AS-BATTERY (SERIES JUMPER)
	8C-5917	[1]	TERMINAL AS-BATTERY (POSITIVE)
	5P-0761 E		CABLE (00-GA, RED)(20CM)
	8T-9757	[1]	TERMINAL AS-BATTERY (NEGATIVE)
	9G-0003	[1]	COVER AS-TERMINAL (BLACK)
	9G-0004	[1]	COVER AS-TERMINAL (RED)
55.	9M-8406	[9]	CLIP (LOOP)
56.	9W-0742 Y	[1]	BLOCK GP-JUNCTION (BATTERY)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

141-7127: WIRING GP-ENGINE

WIRING GP-ENGINE

141-7127 WIRING GP-ENGINE
S/N 7TR634-1972
PART OF 157-2835 ENGINE AR

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3K-6905	[1]	VALVE-BREATHER
2.	4N-3841	[1]	GASKET
3.	7E-5326	[1]	COVER
4.	7E-6016	[1]	GASKET
5.	9X-0262	[3]	ADAPTER
6.	9X-0263	[1]	ADAPTER
7.	9X-6772	[103]	STRAP-CABLE
8.	117-0069	[1]	BLOCK-SENSOR MOUNTING
9.	153-7485	[1]	WIRE AS-GROUND
10.	177-9072	[1]	HARNESS AS (MACHINE INTERFACE/COOLANT FLOW)
	8N-1521	[1]	BELL AS-END
	8N-1535	[1]	BELL AS-END
	112-3587	[2]	BOOT (40-PIN)
	8T-8827	[1]	BOOT (RED)
	155-2270	[20]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2265	[2]	KIT-CONNECTING PLUG (8-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[8]	KIT-RECEPTACLE (3-PIN)
	102-8806	[2]	KIT-RECEPTACLE (8-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[21]	PIN-CONNECTOR (16-GA TO 18-GA)
	8N-1514	[1]	PLUG AS-CONNECTOR (37-PIN)
	8N-1533	[1]	PLUG AS-CONNECTOR (7-PIN)
	101-0204	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6847	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6844	[1]	SEAL
	101-0205	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6848	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6844	[1]	SEAL
	8T-8737	[29]	PLUG-SEAL
	7G-7917	[18]	PLUG-SEAL
	7G-7918	[1]	PLUG-SEAL
	7G-7919	[2]	PLUG-SEAL
	8N-1541	[2]	SOCKET-CONNECTOR (12-GA TO 14-GA)
	8N-1549	[1]	SOCKET-CONNECTOR (4-GA)
	186-3736	[127]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-6857	[20]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-6772	[2]	STRAP-CABLE
	9X-4997	[1]	TERMINAL AS
	9X-4998	[1]	SOCKET (14-GA TO 16-GA)
	110-8769	[1]	WIRE AS (16-GA)
	131-1478	[1]	TERMINAL AS
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)
	131-1500	[1]	TERMINAL AS-RING
	2L-8071	[1]	TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)
	3E-3371	[8]	WEDGE-RECEPTACLE LOCK (3-PIN)
	3E-3389	[2]	WEDGE-RECEPTACLE LOCK (8-PIN)(8-PIN)
11.	183-3862 Y	[1]	SWITCH GP-FLOW (COOLANT)
12.	030-7946	[1]	ELBOW
13.	0S-0509	[16]	BOLT (3/8-16X0.75-IN)
14.	0S-1588	[4]	BOLT (3/8-16X1.25-IN)
15.	0S-1594	[3]	BOLT (3/8-16X1-IN)
16.	0S-1620	[1]	BOLT (1/2-13X0.75-IN)
17.	0S-1621	[1]	BOLT (1/2-13X1-IN)
18.	117-0067	[1]	ELBOW
19.	117-0068 I	[1]	HOSE AS
20.	121-5729	[1]	ELBOW
21.	1F-7958	[1]	NUT-FULL (1/2-13-THD)
22.	2A-1531	[1]	BOLT (1/2-13X6.5-IN)
23.	2B-2695	[2]	BOLT (5/16-18X0.875-IN)
24.	2H-3855	[1]	BOLT (1/2-13X0.875-IN)
25.	3A-3692	[2]	CLIP
26.	4P-7428	[3]	CLIP (LADDER)
27.	4P-7581	[20]	CLIP (LADDER)
28.	5M-2894	[23]	WASHER-HARD (10.2X18.5X2.5-MM THK)
29.	5P-8245	[7]	WASHER-HARD (13.5X25.5X3-MM THK)
30.	5V-6949	[1]	STRIP
31.	7W-6492	[1]	PLUG-PIPE (1/2-14-THD)
32.	8M-2771	[1]	CLIP
33.	8T-6767	[2]	PLUG-PIPE (3/8-18-THD)
34.	9H-8260	[1]	BOLT (1/2-13X6.25-IN)
35.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
37.	163-7882 Y	[1]	SENSOR GP-EXHAUST TEMPERATURE (TURBOCHARGER, RH)
37A.	163-7882 Y	[1]	SENSOR GP-EXHAUST TEMPERATURE (TURBOCHARGER, LH)
38.	102-2240	[1]	SENSOR GP-TEMPERATURE (3-PIN)(COOLANT)
			(EACH INCLUDES)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31-CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
38A.	102-2240	[2]	SENSOR GP-TEMPERATURE (3-PIN)(AFTERCOOLER)
			(EACH INCLUDES)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31-CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
39.	194-6724 Y	[1]	SENSOR GP-PRESSURE (TURBOCHARGER OUTLET)
40.	194-6725 Y	[1]	SENSOR GP-PRESSURE (FILTERED OIL)
40A.	194-6725 Y	[1]	SENSOR GP-PRESSURE (UNFILTERED OIL)
41.	161-9926 Y	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC AIR)
41A.	161-9926 Y	[1]	SENSOR GP-PRESSURE (CRANKCASE)
42.	129-6628 Y	[1]	SENSOR GP-SPEED (TIMING)
43.	255-2282	[1]	SWITCH AS-PRESSURE (FUEL FILTER, DIFFERENTIAL)
	2M-9780	[1]	SEAL-O-RING
	7J-9108	[1]	SEAL-O-RING
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (14-CM)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
44.	172-8660 Y	[1]	SWITCH GP-LIQUID LEVEL (ENGINE OIL)
45.	2M-9780	[1]	SEAL-O-RING
46.	3K-0360	[2]	SEAL-O-RING
47.	6V-5048	[10]	SEAL-O-RING
48.	8L-2786	[1]	SEAL-O-RING
49.	4P-8134	[46]	CLIP (LADDER)
50.	8T-6762	[1]	PLUG-PIPE (1/2-14-THD)
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION

141-7127: WIRING GP-ENGINE

WIRING GP-ENGINE

141-7127 WIRING GP-ENGINE
S/N 7TR1973-UP
PART OF 157-2835 ENGINE AR

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3K-6905	[1]	VALVE-BREATHER
2.	4N-3841	[1]	GASKET
3.	7E-5326	[1]	COVER
4.	7E-6016	[1]	GASKET
5.	9X-0262	[3]	ADAPTER
6.	9X-0263	[1]	ADAPTER
7.	9X-6772	[103]	STRAP-CABLE
8.	117-0069	[1]	BLOCK-SENSOR MOUNTING (TURBOCHARGER OUTLET)
9.	153-7485	[1]	WIRE AS-GROUND
10.	177-9072	[1]	HARNESS AS (MACHINE INTERFACE/COOLANT FLOW)
	8N-1521	[1]	BELL AS-END
	8N-1535	[1]	BELL AS-END
	112-3587	[2]	BOOT (40-PIN)
	8T-8827	[1]	BOOT (RED)
	155-2270	[20]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2265	[2]	KIT-CONNECTING PLUG (8-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[8]	KIT-RECEPTACLE (3-PIN)
	102-8806	[2]	KIT-RECEPTACLE (8-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[21]	PIN-CONNECTOR (16-GA TO 18-GA)
	8N-1514	[1]	PLUG AS-CONNECTOR (37-PIN)
	8N-1533	[1]	PLUG AS-CONNECTOR (7-PIN)
	101-0204	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6847	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6844	[1]	SEAL
	101-0205	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6848	[1]	PLUG AS-CONNECTOR (40-PIN)
	110-6844	[1]	SEAL
	8T-8737	[29]	PLUG-SEAL
	7G-7917	[18]	PLUG-SEAL
	7G-7918	[1]	PLUG-SEAL
	7G-7919	[2]	PLUG-SEAL
	8N-1541	[2]	SOCKET-CONNECTOR (12-GA TO 14-GA)
	8N-1549	[1]	SOCKET-CONNECTOR (4-GA)
	186-3736	[127]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-6857	[20]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-6772	[2]	STRAP-CABLE
	9X-4997	[1]	TERMINAL AS
	9X-4998	[1]	SOCKET (14-GA TO 16-GA)
	110-8769	[1]	WIRE AS (16-GA)
	5P-3454	[1]	TERMINAL-RING (4-GA, 5/16-IN SCREW)
			-OR-
	9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
	131-1500	[1]	TERMINAL AS-RING
	2L-8071	[1]	TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)
	3E-3371	[8]	WEDGE-RECEPTACLE LOCK (3-PIN)
	3E-3389	[2]	WEDGE-RECEPTACLE LOCK (8-PIN)(8-PIN)
11.	183-3862 Y	[1]	SWITCH GP-FLOW (COOLANT)
12.	030-7946	[1]	ELBOW
13.	0S-0509	[16]	BOLT (3/8-16X0.75-IN)
14.	0S-1588	[4]	BOLT (3/8-16X1.25-IN)
15.	0S-1594	[3]	BOLT (3/8-16X1-IN)
16.	0S-1620	[1]	BOLT (1/2-13X0.75-IN)
17.	0S-1621	[1]	BOLT (1/2-13X1-IN)
18.	117-0067	[1]	ELBOW
19.	117-0068 I	[1]	HOSE AS
20.	121-5729	[1]	ELBOW
21.	1F-7958	[1]	NUT-FULL (1/2-13-THD)
22.	2A-1531	[1]	BOLT (1/2-13X6.5-IN)
23.	2B-2695	[2]	BOLT (5/16-18X0.875-IN)
24.	2H-3855	[1]	BOLT (1/2-13X0.875-IN)
25.	3A-3692	[2]	CLIP
26.	4P-7428	[3]	CLIP (LADDER)
27.	4P-7581	[20]	CLIP (LADDER)
28.	5M-2894	[23]	WASHER-HARD (10.2X18.5X2.5-MM THK)
29.	5P-8245	[7]	WASHER-HARD (13.5X25.5X3-MM THK)
30.	5V-6949	[1]	STRIP
31.	7W-6492	[1]	PLUG-PIPE (1/2-14-THD)
32.	8M-2771	[1]	CLIP
33.	8T-6767	[2]	PLUG-PIPE (3/8-18-THD)
34.	9H-8260	[1]	BOLT (1/2-13X6.25-IN)
35.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
37.	163-7882 Y	[1]	SENSOR GP-EXHAUST TEMPERATURE (TURBOCHARGER, RH)
37A.	163-7882 Y	[1]	SENSOR GP-EXHAUST TEMPERATURE (TURBOCHARGER, LH)
38.	102-2240 Y	[1]	SENSOR GP-TEMPERATURE (3-PIN)(COOLANT)
			(EACH INCLUDES)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31-CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
38A.	102-2240 Y	[2]	SENSOR GP-TEMPERATURE (3-PIN)(AFTERCOOLER)
			(EACH INCLUDES)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (31-CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
39.	194-6724 Y	[1]	SENSOR GP-PRESSURE (TURBOCHARGER OUTLET)
40.	194-6725 Y	[1]	SENSOR GP-PRESSURE (FILTERED OIL)
40A.	194-6725 Y	[1]	SENSOR GP-PRESSURE (UNFILTERED OIL)
41.	161-9926 Y	[1]	SENSOR GP-PRESSURE (ATMOSPHERIC AIR)
41A.	161-9926 Y	[1]	SENSOR GP-PRESSURE (CRANKCASE)
42.	273-5041 Y	[1]	SENSOR GP-SPEED (TIMING)
43.	255-2282	[1]	SWITCH AS-PRESSURE (FUEL FILTER, DIFFERENTIAL)
	2M-9780	[1]	SEAL-O-RING
	7J-9108	[1]	SEAL-O-RING
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (14-CM)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
44.	172-8660 Y	[1]	SWITCH GP-LIQUID LEVEL (ENGINE OIL)
45.	2M-9780	[1]	SEAL-O-RING
46.	3K-0360	[2]	SEAL-O-RING
47.	6V-5048	[10]	SEAL-O-RING
49.	4P-8134	[46]	CLIP (LADDER)
50.	8T-6762	[1]	PLUG-PIPE (1/2-14-THD)
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery - Recycle
5230B Excavator

Light Switches
5230B Excavator

Battery or Battery Cable - Inspect/Replace
5230B Excavator

Fuses - Replace
5230B Excavator

Switch (Chip Detector) - Inspect/Clean
5230B Excavator

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Inspection Procedure for the 5230 and 5230B Excavators{1353, 1408, 4151, 5051, 5057, 5070, 6501, 6502, 6506, 6513, 6537, 7000, 7051, 7062, 7272}
Inspection Procedure for the 5230 and 5230B Excavators{1353, 1408, 4151, 5051, 5057, 5070, 6501, 6502, 6506, 6513, 6537, 7000, 7051, 7062, 7272}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Testing the Refrigerant Compressor Protection Module{1408, 1802}
Testing the Refrigerant Compressor Protection Module{1408, 1802}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Installation of CAESultra for Front Shovels{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Front Shovels{1408, 7009, 7010, 7338, 733T, 7490, 7604}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Rework Procedure of Wiring Group on Certain Excavators and Off-Highway Trucks {1408, 1439}
Rework Procedure of Wiring Group on Certain Excavators and Off-Highway Trucks {1408, 1439}

Technical Information Bulletin

Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Data Connectors
5230B Excavator Vital Information Management System (VIMS)

Location of Switches
5230B Excavator Electronic Systems Guide

Location of Relays
5230B Excavator Electronic Systems Guide

Engine Oil Pressure
3500B Engines

Travel Alarm Function
5230B Excavator Machine Electronic Control System

Switches
5230B Excavator Machine Electronic Control System

Relays
5230B Excavator Machine Electronic Control System

Switches
5230B Excavator Vital Information Management System (VIMS)

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System
3500B Engines

Electrical Connector - Inspect
5230B Excavator Vital Information Management System (VIMS)

System Schematic
5230B Excavator Vital Information Management System (VIMS)

Wiring Harness (Open Circuit) - Test
5230B Excavator Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
5230B Excavator Machine Electronic Control System

Troubleshooting

MID 036 - CID 0101 - FMI 03 Crankcase Pressure open/short to +batt
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0101 - FMI 04 Crankcase Pressure short to ground
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0262 - FMI 04 5 Volt Sensor DC Power Supply short to ground
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0262 - FMI 03 5 Volt Sensor DC Power Supply short to +batt
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0263 - FMI 03 Digital Sensor Supply short to +batt
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0263 - FMI 04 Digital Sensor Supply short to ground
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0274 - FMI 04 Atmospheric Pressure short to ground
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0274 - FMI 13 Atmospheric Pressure calibration required
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0827 - FMI 08 Left Exhaust Temperature signal abnormal
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0261 - FMI 13 Engine Timing calibration required
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0101 - FMI 13 Crankcase Pressure calibration required
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0110 - FMI 03 Engine Coolant Temperature open/short to +batt
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0110 - FMI 04 Engine Coolant Temperature short to ground
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0168 - FMI 01 System Voltage Low
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0168 - FMI 02 System Voltage intermittent/erratic
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0274 - FMI 03 Atmospheric Pressure open/short to +batt
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0542 - FMI 13 Unfiltered Engine Oil Pressure cal required
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0100 - FMI 13 Engine Oil Pressure calibration required
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0100 - FMI 03 Engine Oil Pressure open/short to +batt
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0100 - FMI 04 Engine Oil Pressure short to ground
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0542 - FMI 02 Unfiltered Engine Oil Pressure misinstalled
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0190 - FMI 02 Loss of Engine Speed signal
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0190 - FMI 03 Engine Speed open/short to +batt
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0190 - FMI 08 Engine Speed signal abnormal
3500B Engines for 5130B and 5230B Excavators

Engine Speed/Timing Sensor
3500B Engines for 5130B and 5230B Excavators

Analog Sensor - Calibrate
3500B Engines for 5130B and 5230B Excavators

Engine Speed/Timing Sensor - Calibrate
3500B Engines for 5130B and 5230B Excavators

Engine Sensor Open/Short Test
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0542 - FMI 03 Unfiltered Engine Oil Pressure open/short to +batt
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0828 - FMI 08 Right Exhaust Temperature signal abnormal
3500B Engines for 5130B and 5230B Excavators

Switch Circuits
5230B Excavator Vital Information Management System (VIMS)

MID 036 - CID 0091 - FMI 02 Incorrect Throttle Switch inputs
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0542 - FMI 04 Unfiltered Engine Oil Pressure short to ground
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0580 - FMI 03 Power Shift Pres Sensor open/short to +batt
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0580 - FMI 04 Power Shift Pres Sensor short to ground
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0580 - FMI 08 Power Shift Pres Sensor signal is abnormal
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0581 - FMI 05 Power Shift Solenoid open circuit
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0581 - FMI 06 Power Shift Solenoid short to ground
3500B Engines for 5130B and 5230B Excavators

MID 036 - CID 0581 - FMI 13 Power Shift Solenoid cal required
3500B Engines for 5130B and 5230B Excavators

Electrical Connectors and Functions
3500B Engines for 5130B and 5230B Excavators

Analog Sensor Supply
3500B Engines for 5130B and 5230B Excavators

Digital Sensor Supply
3500B Engines for 5130B and 5230B Excavators

Power Shift Solenoid Circuit - Test
3500B Engines for 5130B and 5230B Excavators

Power Shift Solenoid - Calibrate
3500B Engines for 5130B and 5230B Excavators

MID 039 - CID 0376 - FMI 03
5230B Excavator Machine Electronic Control System

MID 039 - CID 0376 - FMI 06
5230B Excavator Machine Electronic Control System

MID 039 - CID 0558 - FMI 03
5230B Excavator Machine Electronic Control System

MID 039 - CID 0558 - FMI 05
5230B Excavator Machine Electronic Control System

MID 039 - CID 0558 - FMI 06
5230B Excavator Machine Electronic Control System

MID 039 - CID 0559 - FMI 03
5230B Excavator Machine Electronic Control System

MID 039 - CID 0559 - FMI 05
5230B Excavator Machine Electronic Control System

MID 039 - CID 0559 - FMI 06
5230B Excavator Machine Electronic Control System

MID 039 - CID 0790 - FMI 03
5230B Excavator Machine Electronic Control System

MID 039 - CID 0790 - FMI 06
5230B Excavator Machine Electronic Control System

MID 039 - CID 0864 - FMI 03
5230B Excavator Machine Electronic Control System

MID 039 - CID 0864 - FMI 06
5230B Excavator Machine Electronic Control System

MID 039 - CID 1173 - FMI 03
5230B Excavator Machine Electronic Control System

MID 039 - CID 1174 - FMI 02
5230B Excavator Machine Electronic Control System

MID 057 - CID 0650 - FMI 02
5230B Excavator Vital Information Management System (VIMS)

Electrical Component and Connector Locations
5230B Excavator Machine Electronic Control System

MID 039 - CID 1173 - FMI 06
5230B Excavator Machine Electronic Control System

Service Magazine

Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17

Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly {1408}
1999/08/30

Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10

Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/10/23

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

New Liquid Level Switches Now Used {7422}
2004/01/26

A New Pressure Sensor for the Swing Brake Is Now Used {5460, 5574}
2004/04/05

Improved Service Meter Used {7478}
2004/05/03

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

An Improved Inspection Checklist Has Been Added to the Inspection Procedures for Certain Excavators {1353, 1408, 4151, 5051, 5057, 5070, 6501, 6502, 6506, 6513, 6537, 7000, 7051, 7062, 7272}
2010/12/24

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

123-8904 WIRING GP-COLD WEATHER -RH S/N 4HZ1-UP PART OF 116-4081 STARTING AR-COLD WEATHER AN ATTACHMENT 5230B

ELECTRICAL AND STARTING SYSTEM

123-8904: WIRING GP-COLD WEATHER

Parts for your 5230B MINING EXCAVATOR:

146-9710: WIRING GP-ELECTRONIC CONTROL

Parts for your 5230B MINING EXCAVATOR:

146-9710: WIRING GP-ELECTRONIC CONTROL

Parts for your 5230B MINING EXCAVATOR:

146-9714: WIRING GP-ENCLOSURE

Parts for your 5230B MINING EXCAVATOR:

200-8017: WIRING GP-ENCLOSURE

Parts for your 5230B MINING EXCAVATOR:

200-8017: WIRING GP-ENCLOSURE

Parts for your 5230B MINING EXCAVATOR:

200-8018: WIRING GP-ENCLOSURE

Parts for your 5230B MINING EXCAVATOR:

200-8018: WIRING GP-ENCLOSURE

Parts for your 5230B MINING EXCAVATOR:

141-7127: WIRING GP-ENGINE

Parts for your 5230B MINING EXCAVATOR:

141-7127: WIRING GP-ENGINE

Parts for your 5230B MINING EXCAVATOR:

Information:

Caterpillar Parts SIS Catalog 5230B :

Truck sale: