AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

146-9742 PUMP & MTG GP-SWING S/N 4HZ1-UP PART OF 146-9723 HYDRAULIC AR 5230B MINING EXCAVATOR


HYDRAULIC SYSTEM
PUMP GP
MOTOR GP

MINING EXCAVATOR 5230B MINING EXCAVATOR 4HZ
 5230B Excavator 4HZ00001-UP (MACHINE) POWERED BY 3516B Engine SEBP3018 5230B 4HZ   (1998)

HYDRAULIC SYSTEM

PUMP GP
PUMP & MTG GP-IMPLEMENT
146-9740 PUMP & MTG GP-IMPLEMENT
PUMP & MTG GP-PILOT
146-9741 PUMP & MTG GP-PILOT
PUMP & MTG GP-SWING
146-9742 PUMP & MTG GP-SWING
PUMP GP-GEAR
100-3559 PUMP GP-GEAR
PUMP GP-GEAR
148-8570 PUMP GP-GEAR
PUMP GP-PISTON
146-5153 PUMP GP-PISTON
 

#SEBP30180610
 

146-9742: PUMP & MTG GP-SWING

146-9742 PUMP & MTG GP-SWING
S/N 4HZ1-UP
PART OF 146-9723 HYDRAULIC AR
i01528249 SEBP3018
1469742 PUMP & MTG GP-SWING Parts scheme
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2563 M [4] BOLT (M20X2.5X60-MM)  
2. 164-5489 Y [1] PUMP GP-PISTON (SWING)  
3. 8T-4123 [4] WASHER (3.62X5.75X0.375-MM THK)  
4. 6F-4718 [1] SEAL-O-RING  
5. 1M-3548 [1] SEAL-O-RING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP30180611
 

100-3559: PUMP GP-GEAR

100-3559 PUMP GP-GEAR -PUMP DRIVE LUBRICATION
S/N 4HZ1-UP
PART OF 6I-7196 PUMP & MTG GP-HYDRAULIC
i00090820 SEBP3018
1003559 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-7213 [8] WASHER-HARD (13.5X20.5X2-MM THK)  
2. 0S-1595 [8] BOLT (1/2-13X1.25-IN)  
3. 104-7400 [1] SHAFT-DRIVE  
4. 9T-1275 [1] FLANGE AS-REVERSE  
5. 9T-1266 [1] GEAR-IDLER  
6. 4T-9298 [4] BUSHING  
7. 6J-2386 [2] DOWEL  
8. 104-7401 [1] BODY AS  
9. 9T-1276 [2] PLATE-PRESSURE  
10. [1] PLATE-ISOLATION  
11. 4T-9425 [1] PLATE-ISOLATION  
12. 6E-2943 [1] PLUG  
13. 008-3214 [1] RING-RETAINING (INTERNAL)  
14. 6V-1899 [2] SEAL-LIP TYPE  
   
    AVAILABLE REPAIR KIT(S):
  105-3204 [1] KIT-SEAL (PUMP DRIVE LUB GEAR PUMP)  
    (INCLUDES SEALS, RINGS & PLUG)
 

#SEBP30180612
 

148-8570: PUMP GP-GEAR

148-8570 PUMP GP-GEAR -PILOT
S/N 4HZ1-UP
PART OF 146-9741 PUMP & MTG GP-PILOT
i00664195 SEBP3018
1488570 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 146-6472 [1] FLANGE AS (INCLUDES BUSHINGS)  
2. 136-2548 [1] BUSHING  
3. 146-6478 [1] GEAR-IDLER  
4. 146-6476 [1] GEAR-DRIVE (11-TEETH)  
5. 1G-6917 J [1] RING-SNAP  
6. 1G-6918 J [1] SEAL  
7. 5B-9318 [1] BALL  
8. 136-3377 J [4] SEAL-O-RING  
9. 146-6473 [1] PLATE-GEAR  
10. 136-2547 [7] BUSHING  
11. 6E-1821 [1] COUPLING  
12. 2M-8191 [1] RING-SNAP  
13. 148-8571 [1] PLATE AS (INCLUDES BUSHINGS)  
14. 146-6474 [1] PLATE-GEAR  
15. 146-6556 [1] COVER AS (INCLUDES BUSHINGS)  
16. 146-6482 [1] KIT-VALVE (GEAR PUMP)  
    (INCLUDES SEALS & RINGS)
17. 146-4298 [4] STUD  
18. 5P-7213 [4] WASHER-HARD (13.5X20.5X2-MM THK)  
19. 6B-6684 [4] NUT-FULL (1/2-20-THD)  
20. 146-6477 [1] GEAR-DRIVE (11-TEETH)  
21. 146-6479 [1] GEAR-IDLER  
22. 136-1856 [4] PLATE-PRESSURE  
23. 136-1969 [16] DOWEL  
24. 136-3378 J [4] SEAL-O-RING  
25. 9S-6130 [1] PLUG  
26. 5P-7815 J [1] SEAL-O-RING  
27. 9S-4182 [1] PLUG (7/16-20-THD)  
28. 033-5853 J [1] SEAL-O-RING  
29. 3E-6767 J [2] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  146-6480 J [1] KIT-SEAL (PILOT & A/C GEAR PUMP)  
    (INCLUDES O-RINGS & SNAP RINGS)
  J   KIT MARKED J INCLUDES PART(S) MARKED J
 

#SEBP30180613
 

146-5153: PUMP GP-PISTON

146-5153 PUMP GP-PISTON -IMPLEMENT
S/N 4HZ1-230
PART OF 146-9740 PUMP & MTG GP-IMPLEMENT
i01516420 SEBP3018
1465153 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 205-7373 Y [1] ROTATING GP-PUMP (IMPLEMENT)  
2. 165-9352 [1] BODY  
3. 158-9103 Y [2] ACTUATOR GP-PUMP (MAXIMUM ANGLE)  
4. 145-3171 [4] LOCKNUT-SEAL  
5. 145-3169 [4] PIN-THREADED  
6. 5H-4909 [2] SEAL-O-RING  
7. 183-5851 Y [2] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)(IMPLEMENT PUMP REGULATOR CONT)  
8. 096-8058 [2] RING-RETAINING  
9. 170-9907 [2] PLUG  
10. 170-9811 [1] BODY  
11. 170-9900 [4] PIN  
12. 205-7375 Y [1] ROTATING GP-PUMP (IMPLEMENT)  
13. 9S-9334 [5] PLUG  
14. 7M-8485 [5] SEAL-O-RING  
15. 158-9104 Y [2] ACTUATOR GP-PUMP (MINIMUM ANGLE)  
16. 165-9353 [1] BLOCK  
17. 205-7376 Y [1] HEAD GP-PUMP (IMPLEMENT)  
18. 9S-4191 [2] PLUG (9/16-18-THD)  
19. 3J-1907 [2] SEAL-O-RING  
20. 165-9394 [2] COVER  
21. 4J-5268 [2] SEAL-O-RING  
22. 166-8637 M [8] SCREW-SOCKET HEAD (M4X0.7X12-MM)  
23. 177-0359 M [8] BOLT-SOCKET HEAD (M22X2.5X90-MM)  
24. 183-3242 [2] PRELOAD AS  
25. 9T-3928 [8] PLUG AS  
    (EACH INCLUDES)
  187-8001 [1] SEAL  
26. 117-5716 [8] PIN  
27. 6E-5060 [2] CAP AS (TAMPERPROOF)  
28. 9T-4367 [2] CAP AS  
29. 205-5626 [4] CAP  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30180614
 

148-3051: PUMP GP-PISTON

148-3051 PUMP GP-PISTON -HYDRAULIC OIL COOLING FAN
S/N 4HZ1-UP
PART OF 146-9738 PUMP & MTG GP-COOLER FAN DRIVE
i01515710 SEBP3018
1483051 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-6594 [1] BEARING-SWASH  
2. 6E-4224 [1] PLUG-SWASHPLATE  
3. 033-6036 [1] SEAL-O-RING  
4. 100-8252 [1] HEAD-PUMP  
5. 9T-1699 [1] SPRING  
6. 9T-1710 [1] POPPET  
7. 9T-1636 [1] SEAT  
8. 6E-6596 [1] COVER-TRUNNION  
9. 6V-3834 [1] SEAL-O-RING  
10. 3E-4302 M [2] SCREW-FLAT HEAD (M4X0.7X10-MM)  
11. 6V-8214 M [3] BOLT (M6X1X20-MM)  
12. 6E-6597 [1] BEARING-SWASH  
13. 6V-8004 M [2] BOLT (M12X1.75X120-MM)  
14. 8T-0372 M [4] BOLT (M12X1.75X90-MM)  
15. 283-9389 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)(HYDRAULIC OIL COOLING PUMP)  
16. 8T-5039 [3] SEAL-O-RING  
17. 6V-8337 M [4] BOLT-SOCKET HEAD (M8X1.25X35-MM)  
18. 095-0888 [2] PIN-SPRING  
19. 6E-6593 [1] SHAFT-PUMP  
20. 6E-6598 [1] HOUSING-PUMP  
21. 006-8663 [1] RING  
22. 8T-4750 [1] SEAL-LIP TYPE  
23. 6E-6599 [1] KIT-BIAS PISTON  
    (INCLUDES SPRING, ROD, PISTON, & SEAL)
24. 6E-6600 [1] SPRING-BIAS  
25. 6E-6571 Y [1] ROTATING GP-PUMP (HYDRAULIC OIL COOLING PUMP)  
26. 6E-6601 [1] GASKET  
27. 7L-9061 [2] SEAL-O-RING  
28. 3E-7417 [2] PLUG  
29. 8T-7876 [2] SEAL-O-RING  
30. 9T-1633 [1] PLATE  
31. 9T-2197 B [1] SHIM PACK (INCLUDES 17-SHIMS)  
32. 1P-6872 [1] CUP-BEARING  
33. 004-9040 [1] CONE-BEARING  
34. 9T-1652 [1] PIN  
35. 6E-6602 [1] KIT-PISTON CONTROL  
    (INCLUDES PISTON, ROD, & SEAL)
36. 167-1802 [1] SWASHPLATE GP  
  1H-3937 [2] PIN  
  167-1801 [2] STOP  
37. 7T-8273 [1] CUP-BEARING  
38. 7T-8272 [1] CONE-BEARING  
39. 3K-0360 [1] SEAL-O-RING  
40. 9S-4185 [1] PLUG (3/4-16-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30180615
 

164-5489: PUMP GP-PISTON

164-5489 PUMP GP-PISTON -SWING
S/N 4HZ1-UP
PART OF 146-9742 PUMP & MTG GP-SWING
i01528255 SEBP3018
1645489 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 205-7373 Y [1] ROTATING GP-PUMP (SWING)  
2. 165-9352 [1] BODY  
3. 158-9103 Y [2] ACTUATOR GP-PUMP (MAXIMUM ANGLE)  
4. 145-3171 [4] LOCKNUT-SEAL  
5. 145-3169 [4] PIN-THREADED  
6. 5H-4909 [2] SEAL-O-RING  
7. 183-5939 Y [2] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)(SWING PUMP REGULATOR CONTROL)  
8. 096-8058 [2] RING-RETAINING  
9. 170-9907 [2] PLUG  
10. 170-9811 [1] BODY  
11. 170-9900 [4] PIN  
12. 205-7375 Y [1] ROTATING GP-PUMP (SWING)  
13. 9S-9334 [5] PLUG  
14. 7M-8485 [5] SEAL-O-RING  
15. 158-9104 Y [2] ACTUATOR GP-PUMP (MINIMUM ANGLE)  
16. 165-9353 [1] BLOCK  
17. 205-7376 Y [1] HEAD GP-PUMP (SWING)  
18. 9S-4191 [2] PLUG (9/16-18-THD)  
19. 3J-1907 [2] SEAL-O-RING  
20. 165-9394 [2] COVER  
21. 4J-5268 [2] SEAL-O-RING  
22. 166-8637 M [8] SCREW-SOCKET HEAD (M4X0.7X12-MM)  
23. 177-0359 M [8] BOLT-SOCKET HEAD (M22X2.5X90-MM)  
24. 183-3242 [2] PRELOAD AS  
25. 9T-3928 [8] PLUG AS  
    (EACH INCLUDES)
  187-8001 [1] SEAL  
26. 117-5716 [8] PIN  
27. 6E-5060 [2] CAP AS (TAMPERPROOF)  
28. 122-5334 [2] CAP  
29. 205-5626 [4] CAP  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30180616
 

214-1034: PUMP GP-PISTON

214-1034 PUMP GP-PISTON -IMPLEMENT
S/N 4HZ231-UP
PART OF 146-9740 PUMP & MTG GP-IMPLEMENT
i01632965 SEBP3018
2141034 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 220-1769 Y [1] ROTATING GP-PUMP  
2. 165-9352 [1] BODY  
3. 158-9103 Y [2] ACTUATOR GP-PUMP  
4. 145-3171 [4] LOCKNUT-SEAL  
5. 145-3169 [4] PIN-THREADED  
6. 5H-4909 [2] SEAL-O-RING  
7. 183-5851 Y [2] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
8. 096-8058 [2] RING-RETAINING  
9. 170-9907 [2] PLUG  
10. 170-9811 [1] BODY  
11. 170-9900 [4] PIN  
12. 205-7375 Y [1] ROTATING GP-PUMP  
13. 9S-9334 [5] PLUG  
14. 7M-8485 [5] SEAL-O-RING  
15. 158-9104 Y [2] ACTUATOR GP-PUMP  
16. 165-9353 [1] BLOCK  
17. 205-7376 Y [1] HEAD GP-PUMP  
18. 9S-4191 [2] PLUG (9/16-18-THD)  
19. 3J-1907 [2] SEAL-O-RING  
20. 165-9394 [2] COVER  
21. 4J-5268 [2] SEAL-O-RING  
22. 166-8637 M [8] SCREW-SOCKET HEAD (M4X0.7X12-MM)  
23. 177-0359 M [8] BOLT-SOCKET HEAD (M22X2.5X90-MM)  
24. 183-3242 [2] PRELOAD AS  
    (EACH INCLUDES)
  183-3252 [1] ROD  
  183-4888 [1] JACKET  
  183-8404 [1] SPRING  
  186-6592 [30] SPRING  
25. 9T-3928 [8] PLUG AS  
    (EACH INCLUDES)
  187-8001 [1] SEAL  
26. 117-5718 M [8] BOLT-SOCKET HEAD (M18X2.5-THD)  
27. 6E-5060 [2] CAP AS (TAMPERPROOF)  
28. 122-5334 [2] CAP  
29. 205-5626 [4] CAP  
30. 5F-3999 [1] SEAL-O-RING  
31. 210-2522 [1] ADAPTER  
32. 8T-5042 M [4] BOLT (M20X2.5X50-MM)  
33. 6V-8260 [1] SEAL-O-RING  
34. 167-9049 [1] COVER  
35. 7X-2552 M [2] BOLT (M16X2X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30180617
 

6E-6562: PUMP GP-PISTON

6E-6562 PUMP GP-PISTON -RADIATOR COOLING
S/N 4HZ1-UP
PART OF 166-3769 PUMP & MTG GP-COOLER FAN DRIVE
i00093778 SEBP3018
6E6562 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 103-9370 [1] SHAFT-PUMP  
2. 6E-4237 [1] BEARING  
3. 6E-4224 [1] PLUG-SWASHPLATE  
  033-6036 [1] SEAL-O-RING  
4. 6L-8797 [1] RING-RETAINING  
5. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
  033-6027 [1] SEAL-O-RING  
6. 9T-1699 [1] SPRING  
7. 9T-1710 [1] POPPET  
8. 9T-1636 [1] SEAT  
9. 6E-4227 [1] COVER  
10. 6V-8837 M [3] BOLT (M6X1X16-MM)  
11. 4F-4097 C [1] SEAL-O-RING  
12. 6E-4236 [1] BEARING  
13. 3E-4302 M [2] SCREW-FLAT HEAD (M4X0.7X10-MM)  
14. 8T-5039 [3] SEAL-O-RING  
15. 095-0888 [2] PIN-SPRING  
16. 8T-0343 M [4] BOLT-SOCKET HEAD (M12X1.75X55-MM)  
17. 095-0705 M [2] BOLT-SOCKET HEAD (M16X2X100-MM)  
18. 283-9418 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)(RADIATOR COOLING)  
19. 6E-4226 [1] HOUSING  
20. 6V-8337 M [4] BOLT-SOCKET HEAD (M8X1.25X35-MM)  
21. 9X-7547 [1] SEAL-LIP TYPE  
22. 7K-8876 [1] CUP-BEARING  
  7K-8877 [1] CONE-BEARING  
23. 6E-4213 [1] KIT-BIAS PISTON  
    (INCLUDES SPRING, ROD, PISTON & PACKING)
24. 6E-4214 [1] SPRING-BIAS  
25. 6E-4216 Y [1] ROTATING GP-PUMP (RADIATOR COOLING)  
26. 6E-4225 [1] GASKET  
27. 7L-9061 [2] SEAL-O-RING  
28. 3E-7417 [2] PLUG  
  8T-7876 [2] SEAL-O-RING  
29. 103-9369 [1] COUPLING-SHAFT  
30. 6E-4234 [1] PLATE-VALVE  
31. 005-0471 [1] CONE-BEARING  
  005-0469 [1] CUP-BEARING  
32. 103-5691 [1] HEAD-PUMP  
33. 103-6282 B [1] SHIM PACK (INCLUDES 17-SHIMS)  
34. 9T-1652 [1] PIN  
35. 6E-4215 [1] KIT-PISTON  
    (INCLUDES PACKING, ROD & PISTON)
36. 6E-4221 Y [1] SWASHPLATE GP  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP30180618
 

117-6062: ROTATING GP-MOTOR

117-6062 ROTATING GP-MOTOR -RADIATOR FAN
S/N 4HZ1-UP
PART OF 6E-6588 MOTOR GP-PISTON
i00094141 SEBP3018
1176062 ROTATING GP-MOTOR Parts scheme
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5202 [1] RING  
2. 9T-9448 [1] FLANGE-SEALING  
3. 146-0780 [1] SEAL-LIP TYPE  
4. 5S-6670 [1] SEAL-O-RING  
5. 6V-4495 [1] RING-RETAINING  
6. 9T-9526 [1] RING  
7. 8C-3058 [1] SEAL-O-RING  
8. 143-1452 [1] RING-RETAINING  
9. 9T-9455 [1] SHIM (1-MM THK)  
10. 9T-9527 [1] BEARING  
11. 9T-9453 B [1] KIT-SPACER (INCLUDES 5-SHIMS)  
12. 9T-9528 [1] BEARING  
13. 9T-9529 [1] PIN  
14. 9T-9449 [1] BOLT  
15. 257-2043 [1] PLATE  
16. 9T-9454 M [1] SCREW-ADJUSTMENT (M16X1.5-THD)  
17. 9T-9450 B [1] SHIM PACK (INCLUDES 16-SHIMS)  
18. 257-2042 [1] BARREL  
19. 9T-9452 [1] DISC  
20. 9T-9451 [1] SPRING  
22. 9T-9447 [1] PLATE-RETAINING  
23. 9T-9442 [7] PISTON AS-MOTOR  
24. 117-7116 [1] SHAFT-DRIVE  
25. 9T-9446 [1] PIN-CENTER  
26. 101-2465 M [14] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP30180619
 

171-6853: ROTATING GP-MOTOR

171-6853 ROTATING GP-MOTOR -HYDRAULIC COOLING FAN
S/N 4HZ1-UP
BI-DIRECTIONAL
PART OF 159-7147 MOTOR GP-PISTON
i01258699 SEBP3018
1716853 ROTATING GP-MOTOR Parts scheme
  For full view, you need register

Parts for your 5230B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 171-6855 [1] SHAFT-DRIVE  
2. 9T-2901 [1] SEAL-LIP TYPE  
3. 9T-2912 [1] COVER  
4. 8T-7567 [1] RING-RETAINING (INTERNAL)  
5. 2H-3934 [1] SEAL-O-RING  
6. 9T-2904 B [2] SHIM (0.1-MM THK)  
7. 9T-2903 B [1] SHIM (0.3-MM THK)  
8. 113-4419 M [7] SCREW-SPECIAL (M5X0.8X8-MM)  
9. 171-6862 [1] PIN  
10. 144-0594 [1] BARREL  
11. 171-6863 [1] SPRING  
12. 171-6857 B [1] SHIM (4-MM THK)  
13. 171-6858 B [1] SHIM (3.9-MM THK)  
14. 171-6859 B [1] SHIM (3.8-MM THK)  
15. 171-6860 B [1] SHIM (3.7-MM THK)  
16. 171-6861 B [1] SHIM (3.6-MM THK)  
17. 144-0595 [1] PLATE-PORT  
18. 171-6950 [7] PISTON AS  
19. 9T-2908 [1] DISC  
20. 144-0590 [1] PLATE  
21. 171-5991 [1] KIT-BEARING (ROTATING MOTOR)  
    (INCLUDES BEARING)
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Special Instruction
Inspection Procedure for the 5230 and 5230B Excavators{1353, 1408, 4151, 5051, 5057, 5070, 6501, 6502, 6506, 6513, 6537, 7000, 7051, 7062, 7272}
Inspection Procedure for the 5230 and 5230B Excavators{1353, 1408, 4151, 5051, 5057, 5070, 6501, 6502, 6506, 6513, 6537, 7000, 7051, 7062, 7272}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Implement Pump Removal and Installation Checklist{5070}
Implement Pump Removal and Installation Checklist{5070}
Specifications
Gear Pump (Pump Drive Lubrication)
5230B Excavator Hydraulic System
Piston Pump (Radiator Cooling)
5230B Excavator Hydraulic System
Gear Pump (Pilot and Air Conditioner)
5230B Excavator Hydraulic System
Piston Pump (Hydraulic Cooling)
5230B Excavator Hydraulic System
Piston Pump (Implement)
5230B Excavator Hydraulic System
Piston Pump (Swing)
5230B Excavator Hydraulic System
Pump Control Valve (Implement)
5230B Excavator Hydraulic System
Pump Control Valve (Swing)
5230B Excavator Hydraulic System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Systems Operation
Gear Pump Operation
5230B Excavator Hydraulic System
Gear Pump (Pilot and Air Conditioner)
5230B Excavator Hydraulic System
Pump Control Valve (Implement)
5230B Excavator Hydraulic System
Pump Control Valve (Swing)
5230B Excavator Hydraulic System
Piston Pump (Implement)
5230B Excavator Hydraulic System
Piston Pump (Swing)
5230B Excavator Hydraulic System
Piston Pump (Hydraulic and Radiator Cooling)
5230B Excavator Hydraulic System
Gear Pump (Pump Drive Lubrication)
5230B Excavator Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Piston Pump (Implement) - Test and Adjust
5230B Excavator Hydraulic System
M1 Port Pressure - Check
5230B Excavator Hydraulic System
Minimum Angle Servo - Inspect
5230B Excavator Hydraulic System
Piston Pump (Radiator Cooling) - Test and Adjust
5230B Excavator Hydraulic System
Piston Pump (Hydraulic Cooling) - Test and Adjust
5230B Excavator Hydraulic System
Bench Test Procedures
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Disassembly and Assembly
Gear Pump (Pump Drive Lubrication) - Disassemble
5230B Excavator Machine Systems
Gear Pump (Pump Drive Lubrication) - Assemble
5230B Excavator Machine Systems
Gear Pump (Pilot and Air Conditioner) - Remove
5230B Excavator Machine Systems
Gear Pump (Pilot and Air Conditioner) - Install
5230B Excavator Machine Systems
Piston Pump (Hydraulic Oil Cooling) - Remove
5230B Excavator Machine Systems
Gear Pump (Pump Drive Lubrication) - Remove
5230B Excavator Machine Systems
Gear Pump (Pump Drive Lubrication) - Install
5230B Excavator Machine Systems
Piston Pump (Hydraulic Oil Cooling) - Install
5230B Excavator Machine Systems
Piston Pump (Implement) - Remove
5230B Excavator Machine Systems
Piston Pump (Implement) - Install
5230B Excavator Machine Systems
Piston Pump (Swing) - Remove
5230B Excavator Machine Systems
Piston Pump (Swing) - Install
5230B Excavator Machine Systems
Hydraulic System - Purge
5230B Excavator Machine Systems
Piston Pump (Implement, Swing) - Disassemble
5230B Excavator Machine Systems
Piston Pump (Implement, Swing) - Assemble
5230B Excavator Machine Systems
Service Magazine
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
An Improved Inspection Checklist Has Been Added to the Inspection Procedures for Certain Excavators {1353, 1408, 4151, 5051, 5057, 5070, 6501, 6502, 6506, 6513, 6537, 7000, 7051, 7062, 7272}
2010/12/24

Caterpillar Parts SIS Catalog 5230B :

PUMP & MTG GP-PILOT
146-9741 PUMP & MTG GP-PILOT
PUMP & MTG GP-IMPLEMENT
146-9740 PUMP & MTG GP-IMPLEMENT
PUMP & MTG GP-IMPLEMENT
146-9740 PUMP & MTG GP-IMPLEMENT
PUMP & MTG GP-HYDRAULIC
6I-7196 PUMP & MTG GP-HYDRAULIC
PUMP & MTG GP-COOLER FAN DRIVE
166-3769 PUMP & MTG GP-COOLER FAN DRIVE
PUMP & MTG GP-COOLER FAN DRIVE
146-9738 PUMP & MTG GP-COOLER FAN DRIVE
MOTOR GP-TRAVEL
108-3028 MOTOR GP-TRAVEL
MOTOR GP-SWING
186-6566 MOTOR GP-SWING
PUMP GP-GEAR
100-3559 PUMP GP-GEAR
PUMP GP-GEAR
148-8570 PUMP GP-GEAR
PUMP GP-PISTON
146-5153 PUMP GP-PISTON
PUMP GP-PISTON
148-3051 PUMP GP-PISTON
PUMP GP-PISTON
164-5489 PUMP GP-PISTON
PUMP GP-PISTON
214-1034 PUMP GP-PISTON
PUMP GP-PISTON
6E-6562 PUMP GP-PISTON
ROTATING GP-MOTOR
117-6062 ROTATING GP-MOTOR

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.