AVSPARE.COM
parts catalog

129-6628 SENSOR GP-SPEED S/N 80M3054-UP PART OF 137-8142 HOUSING GP-FRONT FIELD REPLACEMENT ORDER @@@@@265-9033@@@@@, @@@@@273-5041@@@@@ 5110B




ELECTRICAL AND STARTING SYSTEM

SENSOR GP
 

#SEBP30190210
 

129-6628: SENSOR GP-SPEED

129-6628 SENSOR GP-SPEED
S/N 80M3054-UP
PART OF 137-8142 HOUSING GP-FRONT
FIELD REPLACEMENT ORDER @@@@@265-9033@@@@@, @@@@@273-5041@@@@@
i00089965 SEBP3019
  For full view, you need register

Parts for your 5110B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-1813 BE SLEEVE (31-CM)  
2. 155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
3. 102-8813 [1] SEAL  
4. 186-3736 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
5. 8L-2786 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP30190211
 

265-9033: SENSOR GP-SPEED

265-9033 SENSOR GP-SPEED
S/N 80M3054-UP
CAMSHAFT POSITION
PART OF 137-8142 HOUSING GP-FRONT
FIELD REPLACEMENT FOR @@@@@129-6628@@@@@
i02462358 SEBP3019
  For full view, you need register

Parts for your 5110B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 522-1641 [1] SENSOR GP-SPEED  
1A. 155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
1B. 194-5226 [3] WIRE AS (16-GA)  
    -OR-
  194-5227 [3] WIRE AS (14-GA)  
1C. 8L-2786 [1] SEAL-O-RING  
 

#SEBP30190212
 

273-5041: SENSOR GP-SPEED

273-5041 SENSOR GP-SPEED
S/N 80M3054-UP
FIELD REPLACEMENT FOR @@@@@129-6628@@@@@
FOR USE WITH FIELD REPLACEMENT OF 129-6628 ON THE FOLLOWING ENGINES ONLY, 3508, 3512, 3508B, 3512B, 3516B, & 3524B
i02462186 SEBP3019
  For full view, you need register

Parts for your 5110B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 522-1643 [1] SENSOR GP-SPEED  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  194-5226 [3] WIRE AS (16-GA)  
    -OR-
  194-5227 [3] WIRE AS (14-GA)  
  117-8766 [1] SEAL-O-RING  
  133-1207 [1] WASHER (21.1X28.1X0.9-MM THK)  
 

#SEBP30190213
 

100-3055: SENSOR GP-TEMPERATURE

100-3055 SENSOR GP-TEMPERATURE -HYDRAULIC OIL
S/N AAA1-UP
8-VOLTS
PART OF 165-1620 WIRING GP-CHASSIS
i00089823 SEBP3019
  For full view, you need register

Parts for your 5110B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP30190214
 

102-2240: SENSOR GP-TEMPERATURE

102-2240 SENSOR GP-TEMPERATURE
S/N 80M3054-UP
PART OF 122-1177 LIFTING GP-ENGINE, 114-5212 LINES GP-FUEL FILTER
i01966291 SEBP3019
  For full view, you need register

Parts for your 5110B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-1813 E SLEEVE (34-CM)  
2. 102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  E   ORDER BY THE CENTIMETER
 

#SEBP30190215
 

106-0735: SENSOR GP-TEMPERATURE

106-0735 SENSOR GP-TEMPERATURE
S/N 80M3054-UP
PROVIDES SENSORS FOR MONITORING MARINE TRANSMISSION OIL TEMP AND PRESSURE, 3 PIN ACTIVE
PART OF 126-7292 PUMP & MTG GP-UNIT INJ HYD
i00089839 SEBP3019
  For full view, you need register

Parts for your 5110B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-1813 E SLEEVE (34-CM)  
2. 102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  E   ORDER BY THE CENTIMETER
 

#SEBP30190216
 

220-6000: SOFTWARE GP-MONITOR

220-6000 SOFTWARE GP-MONITOR -EMS
S/N AAA344-UP
PART OF 220-6346 ELECTRONICS GP-MONITOR
i01877487 SEBP3019
  For full view, you need register

Parts for your 5110B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP30190217
 

169-5947: STARTING AID GP-ETHER

169-5947 STARTING AID GP-ETHER
S/N AAA1-UP
PART OF 162-9647 INSTALLATION AR-ENGINE
i01235822 SEBP3019
  For full view, you need register

Parts for your 5110B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6313 [1] NUT (5/16-24-THD)  
2. 5P-6314 [1] SLEEVE  
3. 6N-7672 [1] ATOMIZER-ETHER  
4. 8X-4813 [1] BRACKET  
5. 8X-4814 [1] BRACKET  
6. 171-1030 [1] TUBE  
7. 3B-7764 [1] BUSHING (REDUCING)  
8. 5P-6312 [1] UNION  
9. 6V-2686 [3] CLIP  
10. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4133 M [3] NUT (M10X1.5-THD)  
12. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
   
  7N-0296 A [1] CYLINDER AS-ETHER  
    (MUST BE PROCURED LOCALLY FROM YOUR CATERPILLAR DEALER)
  A   NOT PART OF THIS GROUP
  M   METRIC PART
 

#SEBP30190218
 

179-0562: STARTING AID GP-ETHER

179-0562 STARTING AID GP-ETHER -RADIATOR
S/N AAA1-UP
PART OF 177-3652 RADIATOR AR
i01256780 SEBP3019
  For full view, you need register

Parts for your 5110B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6333 [1] VALVE AS-SOLENOID (24-VOLT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  7N-9801 [1] GASKET  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 5P-6313 [3] NUT (5/16-24-THD)  
3. 5P-6314 [3] SLEEVE  
4. 7N-2059 [1] CLAMP AS (CYLINDER)  
5. 170-8662 [1] TUBE  
6. 4M-8973 [1] ELBOW  
7. 5P-2948 [1] FITTING AS  
8. 5P-6312 [1] UNION  
9. 6V-2686 [6] CLIP  
10. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
12. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
13. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
14. 5P-5630 BD TUBE  
   
  7N-0296 A [1] CYLINDER AS-ETHER  
    (MUST BE PROCURED LOCALLY FROM YOUR CATERPILLAR DEALER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP30190219
 

166-6839: STARTING AR-COLD WEATHER

166-6839 STARTING AR-COLD WEATHER
S/N AAA1-293
LOW TEMPERATURE-WET
CANNOT BE USED WITH @@@@@169-3948@@@@@
AN ATTACHMENT
i01253540 SEBP3019
  For full view, you need register

Parts for your 5110B MINING EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-7922 [4] SPACER (0.531X0.94X0.875-IN THK)  
2. 8N-0869 [2] COVER-TERMINAL (RED)  
3. 8W-0933 [1] HOLD-DOWN AS-BATTERY  
4. 8X-7847 [4] ROD  
5. 166-4847 [1] CABLE AS (POS. BATTERY TO POS. BUS BAR)  
  5P-0696 E CONDUIT (183CM)  
  5P-2600 [1] RING-TERMINAL (000-GA, 1/2-IN SCREW)  
  8C-4613 [1] TERMINAL AS-BATTERY (POSITIVE, LH)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
  8T-5357 E CABLE (00-GA, RED)(200CM)  
  9G-0002 [1] COVER AS-TERMINAL (RED)(RED)  
  8L-8413 [1] STRAP-CABLE (WHITE)  
  9M-4493 [2] FERRULE  
  108-1304 E TUBE-HEAT SHRINK (33-MM DIA)(16CM)  
6. 166-4848 [1] CABLE AS (NEG. BATTERY TO NEG. BUS BAR)  
  5P-0696 E CONDUIT (198CM)  
  5P-0744 E CABLE (00-GA, BLACK)(215CM)  
  5P-2600 [1] RING-TERMINAL (000-GA, 1/2-IN SCREW)  
  8C-4603 [1] TERMINAL AS-BATTERY (NEGATIVE, RH)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
  9G-0005 [1] COVER AS-TERMINAL (BLACK)  
  8L-8413 [1] STRAP-CABLE (WHITE)  
  9M-4493 [2] FERRULE  
  108-1304 E TUBE-HEAT SHRINK (33-MM DIA)(16CM)  
7. 166-4849 [1] CABLE AS (POS. STARTER TO STARTER)  
  5P-0696 E CONDUIT (121CM)  
  5P-2600 [2] RING-TERMINAL (000-GA, 1/2-IN SCREW)  
  8T-5357 E CABLE (00-GA, RED)(145CM)  
  9M-4493 [2] FERRULE  
  108-1304 E TUBE-HEAT SHRINK (33-MM DIA)(16CM)  
8. 166-4851 [1] CABLE AS (NEG. STARTER TO STARTER)  
  5P-0744 E CABLE (00-GA, BLACK)(BLK)(160CM)  
  5P-2600 [2] RING-TERMINAL (000-GA, 1/2-IN SCREW)  
9. 166-5202 [1] CABLE AS (POS.TO NEG. BATTERY TO BATTERY)  
  8C-4660 [1] TERMINAL AS (NEGATIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
  8T-5357 E CABLE (00-GA, RED)(14CM)  
  9G-0003 [1] COVER AS-TERMINAL (BLACK)  
  8L-8413 [1] STRAP-CABLE (WHITE)  
  9G-0004 [1] COVER AS-TERMINAL (RED)  
  8L-8413 [1] STRAP-CABLE (WHITE)  
  9X-1402 [1] TERMINAL AS-BATTERY (POSITIVE, RH)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
10. 105-4729 Y [1] STARTING MOTOR GP-ELECTRIC  
11. 130-9984 [7] CLIP (LOOP)  
12. 6D-4246 [2] CLIP (LOOP)  
13. 7X-4736 [1] GROMMET  
14. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4133 M [2] NUT (M10X1.5-THD)  
16. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
17. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
18. 8T-4244 M [4] NUT (M12X1.75-THD)  
19. 8T-8549 M [4] LOCKNUT (M12X1.75-THD)  
20. 9G-8909 [2] COVER-TERMINAL (BLACK)  
21. 9M-4972 [2] CLIP (LOOP)  
22. 9X-9730 [2] BATTERY GP (12-VOLT)  
    (EACH INCLUDES)
  7N-0060 [6] VENT AS  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Troubleshooting
Engine Speed/Timing Sensor - Calibrate
3412E Engine for Caterpillar Built Machines
CID 0261 FMI 13 Engine Timing Calibration required
3408E and 3412E Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
3408E and 3412E Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3408E and 3412E Engines for Caterpillar Built Machines
CID 0100 FMI 13 Engine Oil Pressure calibration required
3408E and 3412E Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3408E and 3412E Engines for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3408E and 3412E Engines for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high
3412E Engine for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3412E Engine for Caterpillar Built Machines
Engine Speed/Timing Sensor Circuit - Test
3408E and 3412E Engines for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3408E and 3412E Engines for Caterpillar Built Machines
CID 0174 FMI 03 Fuel Temperature open/short to +batt
3408E and 3412E Engines for Caterpillar Built Machines
CID 0174 FMI 04 Fuel Temperature short to ground
3408E and 3412E Engines for Caterpillar Built Machines
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
3408E and 3412E Engines for Caterpillar Built Machines
CID 0175 FMI 04 Engine Oil Temperature short to ground
3408E and 3412E Engines for Caterpillar Built Machines
CID 0190 FMI 03 Engine Speed open/short to + batt
3408E and 3412E Engines for Caterpillar Built Machines
CID 0190 FMI 02 Loss of Engine Speed Signal
3408E and 3412E Engines for Caterpillar Built Machines
CID 0190 FMI 07 Primary Speed Sensor misinstalled
3412E Engine for Caterpillar Built Machines
CID 0190 FMI 08 Engine Speed signal abnormal
3408E and 3412E Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3408E and 3412E Engines for Caterpillar Built Machines
CID 0263 FMI 03 Digital Sensor Supply short to +batt
3408E and 3412E Engines for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3408E and 3412E Engines for Caterpillar Built Machines
CID 0263 FMI 04 Digital Sensor Supply short to ground
3408E and 3412E Engines for Caterpillar Built Machines
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3408E and 3412E Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3408E and 3412E Engines for Caterpillar Built Machines
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3412E Engine for Caterpillar Built Machines
CID 0276 FMI 03 Left Turbo Inlet Pressure open/short to +batt
3412E Engine for Caterpillar Built Machines
CID 0342 FMI 03 Secondary Engine Speed open/short to +batt
3408E and 3412E Engines for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3408E and 3412E Engines for Caterpillar Built Machines
CID 0274 FMI 13 Atmospheric Pressure calibration required
3408E and 3412E Engines for Caterpillar Built Machines
CID 0276 FMI 04 Left Turbo Inlet Pressure short to ground
3412E Engine for Caterpillar Built Machines
CID 0273 FMI 00 Turbo Outlet Pressure above normal
3408E and 3412E Engines for Caterpillar Built Machines
CID 0273 FMI 13 Turbo Outlet Pressure calibration required
3408E and 3412E Engines for Caterpillar Built Machines
CID 0275 FMI 13 Right Turbo Inlet Pressure calibration required
3408E and 3412E Engines for Caterpillar Built Machines
CID 0276 FMI 13 Left Turbo Inlet Pressure calibration required
3412E Engine for Caterpillar Built Machines
CID 0342 FMI 07 Secondary Speed Sensor misinstalled
3408E and 3412E Engines for Caterpillar Built Machines
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
3408E and 3412E Engines for Caterpillar Built Machines
CID 0580 FMI 03 Power Shift Pres Sensor open/short to +batt
3412E Engine for Caterpillar Built Machines
CID 0580 FMI 04 Power Shift Pres Sensor short to ground
3412E Engine for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
3412E Engine for Caterpillar Built Machines
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3408E and 3412E Engines for Caterpillar Built Machines
Engine Pressure Sensor - Calibrate
3408E and 3412E Engines for Caterpillar Built Machines
Analog Sensor Supply Circuit - Test
3412E Engine for Caterpillar Built Machines
Engine Fan Speed Sensor Circuit - Test
3408E and 3412E Engines for Caterpillar Built Machines
Engine Sensor Open/Short Circuit - Test
3412E Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3408E and 3412E Engines for Caterpillar Built Machines
CID 0264 FMI 08 Decel Throttle Position signal abnormal
3408E and 3412E Engines for Caterpillar Built Machines
CID 0266 FMI 02 Incorrect Crank-without-inject inputs
3408E and 3412E Engines for Caterpillar Built Machines
CID 0277 FMI 08 Timing Calibration signal abnormal
3408E and 3412E Engines for Caterpillar Built Machines
E164 High Injector Actuation Pressure
3412E Engine for Caterpillar Built Machines
Analog Sensor Supply Circuit - Test
3408E and 3412E Engines for Caterpillar Built Machines
Crank Without Inject Circuit - Test
3408E and 3412E Engines for Caterpillar Built Machines
Decelerator Position Sensor Circuit - Test
3408E and 3412E Engines for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3408E and 3412E Engines for Caterpillar Built Machines
Engine Sensor Open/Short Circuit - Test
3408E and 3412E Engines for Caterpillar Built Machines
Engine Speed/Timing Sensor - Calibrate
3408E and 3412E Engines for Caterpillar Built Machines
CID 0091 FMI 08 Throttle Position signal abnormal
3408E and 3412E Engines for Caterpillar Built Machines
Timing Calibration Sensor Circuit - Test
3408E and 3412E Engines for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3408E and 3412E Engines for Caterpillar Built Machines
Throttle Position Sensor Circuit - Test
3408E and 3412E Engines for Caterpillar Built Machines
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3412E Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3412E Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3408E and 3412E Engines for Caterpillar Built Machines
Analog Sensor Supply Circuit - Test
3408E and 3412E Engines for Caterpillar Built Machines
Engine Sensor Open/Short Circuit - Test
3408E and 3412E Engines for Caterpillar Built Machines
CID 0601 FMI 13 Brake Air Pressure calibration required
3408E and 3412E Engines for Caterpillar Built Machines
CID 0601 FMI 04 Brake Air Pressure short to ground
3408E and 3412E Engines for Caterpillar Built Machines
CID 0601 FMI 03 Brake Air Pressure open/short to +batt
3408E and 3412E Engines for Caterpillar Built Machines
CID 0190 FMI 02 Loss of Engine Speed Signal
3412E Engine for Caterpillar Built Machines
CID 0190 FMI 03 Engine Speed open/short to + batt
3412E Engine for Caterpillar Built Machines
CID 0342 FMI 03 Secondary Engine Speed open/short to +batt
3412E Engine for Caterpillar Built Machines
CID 0190 FMI 08 Engine Speed abnormal
3412E Engine for Caterpillar Built Machines
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
3412E Engine for Caterpillar Built Machines
CID 0164 FMI 04 Injector Actuation Pressure voltage low
3408E and 3412E Engines for Caterpillar Built Machines
Pressure Sensor - Calibrate
3412E Engine for Caterpillar Built Machines
Timing - Calibrate
3412E Engine for Caterpillar Built Machines
Cooling Fan Speed - Test
3412E Engine for Caterpillar Built Machines
Sensor Signal (Analog, Active) - Test
3412E Engine for Caterpillar Built Machines
Sensor Supply - Test
3412E Engine for Caterpillar Built Machines
Speed Control - Test
3412E Engine for Caterpillar Built Machines
Speed/Timing - Test
3412E Engine for Caterpillar Built Machines
Pressure Sensor - Calibrate
3408E and 3412E Engines for the 844 Wheel Dozer and for 988F Series II and 990 Series II Wheel Loaders
Speed Control (Switch) - Test
3408E and 3412E Engines for the 844 Wheel Dozer and for 988F Series II and 990 Series II Wheel Loaders
Speed/Timing - Test
3408E and 3412E Engines for Caterpillar Built Machines
Sensor Signal (Analog, Active) - Test
3408E and 3412E Engines for the 844 Wheel Dozer and for 988F Series II and 990 Series II Wheel Loaders
Timing - Calibrate
3408E and 3412E Engines for Caterpillar Built Machines
Sensor Supply - Test
3408E and 3412E Engines for the 844 Wheel Dozer and for 988F Series II and 990 Series II Wheel Loaders
Sensor Supply - Test
3408E and 3412E Engines for Caterpillar Built Machines
Sensor Signal (Analog, Active) - Test
3408E and 3412E Engines for Caterpillar Built Machines
Pressure Sensor - Calibrate
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Turbocharger Outlet Pressure Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Speed/Timing Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Coolant Temperature Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Engine Oil Pressure Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Fuel Temperature Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Engine Oil Temperature Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Atmospheric Pressure Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine

Caterpillar Parts SIS Catalog 5110B :

Truck sale:

$415,000 USD 
CATERPILLAR 5110B 2002
- TRACK EXCAVATORS
CLEVELAND BROTHERS EQUIPMENT CO., INC.
United States
Call 
2002 CAT 5110B

PRIMA Equipment
 
2003 CAT 5110B

Sukut Equipment & Rentals
Santa Ana, California
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.